Post on 08-Apr-2018
visit us online at www.hardwaresuppliers.com
2
For all swinging doors - viewing the door from the outside: If the hinges are on the right side of the door, then the door is right handed. If the hinges are on the left side, then the door is left handed.
How To Determine Hand of Door
B 511 D 626 IC
Standard Ordering Example - B511 D 626 ICSeries + Function + Design + Finish + Option
HOW TO ORDER EXIT DEVICES
Standard Order Example - F 18 V LE RHR 26D S
Fire Option + Device Series + Device Type + Function/Trim + Hand + Finish + Length
HOW TO ORDER LOCKSETS
F 18 V LE DAN RHR 26D S
LHLeft Hand
RHRight Hand
LRBLeft HandReverse Bevel
RRH Right Hand
Reverse Bevel
INSIDE
OUTSIDE
OUTSIDE
Locksets Pages 4-12B-Series Page 4
H-Series Page 5
M-Series Page 6
T-Series Pages 7-8
W-Series Page 9
X-Series Pages 10-11
Miscellaneous Page 12
Exit Devices Pages 13-2619 Series Pages 13-14
XX Series Pages 15-18
Trim Pages 19-21
Strikes Page 22
Mullions Page 23
Parts & Miscellaneous Pages 24-26
Door Closers Pages 27-28
visit us online at www.hardwaresuppliers.com
3
INVENTORIED FINISHES - EXIT DEVICES (MONARCH)M-AL Powder Coated AluminumM-13 Powder Coated Dark Bronze3 Brass, Polished10 Bronze, Dull10B Bronze, Dull - Oxidized-Oil Rubbed26D Chromium, Dull32D Stainless Steel, Satin SP28 Lacquer Sprayed AluminumSP313 Sprayed DuranodicUS19 Black
INVENTORIED FINISHES - LOCKSETS605 Brass, Polished612 Satin Bronze613 Oil Rubbed Satin Bronze625 Bright Chromium626 Satin Chromium630 Satin Stainless Steel
INVENTORIED FINISHES - DOOR CLOSERS (DOR-O-MATIC)689 Aluminum695 Dark Bronze696 Brass, Polished
EXIT DEVICE ABBREVIATIONSC Concealed Vertical Rod Device TPL Three Point Latch Device
F Fire Exit Hardware V Surface Vertical Rod Device
M Mortise Device WDC Wood Door Concealed Vertical Rod Device
R Rim Device
EXIT DEVICE OPTIONS ABBREVIA-TIONS
C Cylinder TrimKIL-BE Key in Lever with Blank Escutcheon
DT Dummy TrimKIL-IC Key in Lever with IC Core
EO Exit Only, No Outside Trim / Basic Assembly / Blank Trim Plate L Lever
K Knob LHR Left Hand Reverse
KD Keyed Differently NL Night Latch
K-BE Knob with Blank Escutcheon RHR Right Hand Reverse
KIK Key in Knob TL Thumb Lever
KIK-BE Key in Knob with Blank Escutcheon TLP Thumb Lever with Pull
KIL Key in Lever TP Thumbpiece
visit us online at www.hardwaresuppliers.com
4
B Series - Key In LeverDesign Product # Description 605 612 613 625 626
DaneD
B101D Passage / Closet Latchset l l l l l
B301D Privacy Lock l l l l l
B511D Entry / Office Lock l l l l l
B511D IC Entry / Office Lock w/ IC l l l l l
B561D Classroom Lock l l l l l
B561D IC Classroom Lock w/ IC l l
B581D Storeroom Lock l l l l l
B581D IC Storeroom Lock w/ IC l l l
QuantumQ
B101Q Passage / Closet Latchset l l l
B301Q Privacy Lock l l l
B511Q Entry / Office Lock l l l
B561Q Classroom Lock l
B581Q Storeroom Lock l l
IC- Interchangeable Core (Additional Cost) Options: 2 3/8” Backset Full Lip Strike
B Series - Medium Duty Cylindrical Locks, Grade 2
DANE
QUANTUM
visit us online at www.hardwaresuppliers.com
5
H Series- Grade 2Design Product # Description 605 613 626 630
EliteE
H511E Entry Double Locking l l l
HanaH
H101H Entry Single Locking l l
H451H Hotel/ Motel Lock l l
H511H Entry Double Locking l l l
DaneD
H101D Entry Single Lock l l l
Bolts - H Series (Upper Bolt)Model Description Backset
A74420-000 2 1/4” x 1” Square Corner (Single Cylinder) 2 3/8”
A74421-000 2 1/4” x 1” Radius Corner (Single Cylinder) 2 3/8”
A76429-000 Drive-in (Single Cylinder) 2 3/8”
H series Deadlatches (Lower Latch)
A57420-00D 2 1/4” x 1” Square Corner 2 3/8”
A57435-00D 2 1/4” x 1 1/8” Square Corner 2 3/4”
H series Springlatches (Lower Latch)
A57420-000 2 1/4” x 1” Square Corner 2 3/8”
A57421-000 2 1/4” x 1” Radius Corner 2 3/8”
A57435-00D 2 1/4” x 1 1/8” Square Corner 2 3/4”
H Series - Interconnected Auxiliary Locks, Grade 2
Elite Knob
Hana Knob
Dane Lever
visit us online at www.hardwaresuppliers.com
6
M Series- Dane Lever
Design Product # Description
Gala (DG)
613
Dane
MA101 Passage/Closet Latchset l
MA301 Privacy Lock l
MA311 Privacy, Bedroom or Bath Lock l
MA521 Entry / Office Lock l
MA531 Entry / Office Lock l
MA561 Classroom Lock l
MA571 Dormitory Lock l
IC- Interchangeable Core (Additional Cost)
Dane-Gala
MA Series - Mortise Locks
visit us online at www.hardwaresuppliers.com
7
T Series - CYLINDRICAL LOCKS
T Series- Avalon Key-In-Lever LockDesign Product # Description 605 613 625 626
Avalon (A)
T12A Half Dummy l l l l
T18A Full Dummy l l l l
T101A Passage l l l l
T301A Privacy l l l l
T381A Entrance/Vestibule l l l
T511A Entrance/Office l l l l
T511A IC Entrance/Office IC l
T561A Classroom l l l l
T561A IC Classroom IC l
T571A Dormitory l
T581A Storeroom l l l l
T581A IC Storeroom IC l
IC- Interchangeable Core (Additional Cost)
T Series- Dane Key-In-Lever LockDesign Product # Description 605 612 613 625 626
Dane(D)
T12D Half Dummy l l l l l
T18D Full Dummy l l l ø l l
T101D Passage l l l l l
T301D Privacy l l l l l
T381D Entrance/Vestibule l l l l
T501D Entry l
T511D Entrance/Office l l l l l
T511D IC Entrance/Office IC l l l l
T521D Entrance/Office l
T561D Classroom l l l l l
T561D IC Classroom IC l l
T571D Dormitory l
T581D Storeroom l l l l l
T581D IC Storeroom IC l l l l
IC- Interchangeable Core (Additional Cost)ø Discontinued When Out Of Stock
visit us online at www.hardwaresuppliers.com
8
T Series- Quantum Key-In-Lever LockDesign Product # Description 605 613 625 626
Quantum(Q)
T12Q Half Dummy l l l l
T18Q Full Dummy l l l l
T101Q Passage l l l l
T301Q Privacy l l l l
T381Q Entrance/Vestibule l l l l
T511Q Entrance/Office l l l l
T511Q IC Entrance/Office IC l
T561Q Classroom l l l l
T561Q IC Classroom IC l
T581Q Storeroom l l l l
T581Q IC Storeroom IC l
IC- Interchangeable Core (Additional Cost)
T Series Deadlatches
Model Description Backset
A98535-00D 2 1/4” x 1 1/8” Square Corner 2 3/4”
A98545-00D 2 1/4” x 1 1/8” Square Corner 2 3/4”
T Series Springlatches
A98535-000 2 1/4” x 1 1/8” Square Corner 2 3/4”
A98545-000 2 1/4” x 1 1/8” Square Corner 3 3/4”
T Series - Cylindrical LockS
visit us online at www.hardwaresuppliers.com
9
W Series - Cylindrical LockS
W Series- Dane Key-In-Lever LockDesign Product # Description 613 625 626
Dane(D)
W101D Passage l l l
W161D Communicating Exit Lock l
W201D Patio Lock l
W301D Privacy l l l
W511D Entrance/Office l l l
W561D Classroom l
W581D Storeroom l
W Series- Quantum Key-In-Lever LockDesign Product # Description 613 625 626
Quantum(Q)
W101Q Passage l l l
W301Q Privacy l l l
W511Q Entrance/Office l l
W Series- Elite Key-In-Knob LockDesign Product # Description 613 625 626
Elite(E)
W101E Passage l
W301E Privacy l
W511E Entrance/Office l
visit us online at www.hardwaresuppliers.com
10
X Series- Hana Key-In-Knob Lock
Design Product # Description
Hana (HG)
626
Hana
X12HG Half Dummy l
X101HG Passage l
X301HG Privacy l
X511HG Entrance / Office l
X561HG Classroom l
X561HG IC Classroom l
IC- Interchangeable Core (Additional Cost)
X Series- Elite Key-In-Knob Lock
Design Product # Description
Gala (EG)
612 626
Elite
X12EG Half Dummy l
X18EG Full Dummy l
X101EG Passage l l
X511EG Entrance / Office l l
X511EG IC Entrance / Office w/ IC l l
X561EG Classroom l
X561EG IC Classroom l l
X571EG Dormitory l
X581EG Storeroom l l
X581EG IC Storeroom l l
IC- Interchangeable Core (Additional Cost)
X Series - Cylindrical LockS
visit us online at www.hardwaresuppliers.com
11
X Series- Troy Key-In-Knob Lock
Design Product # Description
Troy (TG)
626 630
Troy
X12TG Half Dummy l
X101TG Passage l l
X301TG Privacy l l
X511TG Entrance/Office l l
X511TG IC Entrance/Office l l
X561TG Classroom l
X561TG IC Classroom l l
X571TG Dormitory l l
X581TG Storeroom l
X581TG IC Storeroom l l
IC- Interchangeable Core (Additional Cost)
X Series Deadlatches
Model Description Backset
A98535-00D 2 1/4” x 1 1/8” Square Corner 2 3/4”
A98545-00D 2 1/4” x 1 1/8” Square Corner 2 3/4”
X Series Springlatches
A98535-000 2 1/4” x 1 1/8” Square Corner 2 3/4”
A98545-000 2 1/4” x 1 1/8” Square Corner 3 3/4”
Note - 2 1/4” x 1 1/8” Faceplate 2 3/4” Backset Standard
X Series - Cylindrical LockS
visit us online at www.hardwaresuppliers.com
12
Interchangeable Core Keying Supplies
Model Description
1404 Pin Kit A2 System, Complete (Wood Case) Falcon Springcover
1405 Ejector Tool
1418 Falcon Pinning Kit
A12635-000-00 Wafer Pin, #2 through #19
A12636-000-00 Bottom Pin, #0 through #9
A12637-001-00 Tumbler Spring
A12639-002-00 Spring Cover, 7 pin
Key Kits and Service Items
Model Description
A08552-000-00 Universal Top Pin
A08553 Bottom Pins 0-9
A08554-000-00 Tumbler Springs
A08580 Master Pins 2-9
Key Blanks
Model Description
KB573 Key Blank-5 Pin E, G, H Keyways
KB573 Key Blank-5 Pin K, N, P Keyways
KB577 Key Blank-6 Pin E, G, H Keyways
KB577 Key Blank-6 Pin K, N, P Keyways
KB581 Key Blank-7 Pin G Keyways
Miscellaneous - Parts and Accessories
Interchangeable Core Tailpieces and Cams
Model Description
A12667-000-00 Cylinder Cam (Sargent or Yale)
A12667-001-00 Cylinder Cam (Adams-Rite 4500, 4700 & MS series)
A12667-002-00 Cylinder Cam (Adams-Rite 4070 & 4050)
A12667-003-00 Cylinder Cam (Old Straight & Falcon-Non Deadbolt)
A12667-007-00 Cylinder Cam (Falcon Cloverleaf for Deadbolt Functions)
A12667-008-00 Cylinder Cam (Schlage - L series)
Interchangeable Cores- Not Keyed (Uncombinated)
Model Description
C646A 6 Pin Cores A, B, C, D, DD, E, F, G, H, J, & N Keyways
C647A 7 Pin Cores A, B, C, D, DD, E, F, G, H, J, & N Keyways
Interchangeable Cores- Indicator Pin-Not Keyed (Uncombinated)
C282A 6 Pin Indicator Core-A Keyway (S Series) For Hotel/ Motel
C716A 6 Pin Indicator Core-A Keyway (X Series) For Hotel/ Motel
C717A 7 Pin Indicator Core-A Keyway (X Series) For Hotel/ Motel
Key Blanks For Interchangeable Core
Model Description
KB628A Change Keys Blank- A, B, C, D, DD, E, F, G, H, J, & N Keyways (Embossed)
KB608A Control Keys Blank- A, B, C, D, DD, E, F, G, H, J, & N Keyways (Embossed)
visit us online at www.hardwaresuppliers.com
13
19 Series - Exit Devices
19-R Series
Model Description LengthFinish
32D SP28 SP313
19REOxxxL Device Only, No Trim • Basic Assembly Long ● ● ●
19REOxxxS Device Only, No Trim • Basic Assembly Short ● ● ●Short = 36” Length DeviceLong = 48” Length Device
Non-Handed Rim Device 19-R SeriesPanic Exit Hardware
The Monarch 19-R Series Rim Device meets the demand for superior panic hardware. This economical device is designed to meet the needs for modern touchbar styling. This non-handed device covers a 161 cutout and may be used on 1¾" narrow stile aluminum doors.
All Monarch Exit Devices and Trim products meet ANSI 156.3-2001 Grade 1 Standards
Non-Handed Rim Device F-19-RFire Exit Hardware
The F-19 Fire Exit Device is an excellent addition to the touchbar. This device is non-handed and is listed by UL for B label fire door installations on 4’0” x 7’2” single doors and /or 8’0” x 7’2” double doors with Monarch’s F-4023 removable mullion or CRF-4023.
F-19-R Series
Model Description LengthFinish
32D SP28 SP313
F19REOxxxL Device Only, No Trim • Basic Assembly Long ● ● ●
F19REOxxxS Device Only, No Trim • Basic Assembly Short ● ● ●Short = 36” Length DeviceLong = 48” Length Device
xxx - Denotes Finish
visit us online at www.hardwaresuppliers.com
14
19-V Series
Model Description LengthFinish
32D SP28 SP31319VEOxxxL Device Only, No Trim • Basic Assembly Long ● ●19VEOxxxS Device Only, No Trim • Basic Assembly Short ● ● ●
Short = 36” Length DeviceLong = 48” Length Device
Reversible Vertical Rod Device 19-V SeriesPanic Exit Hardware
The Monarch 19-V is manufactured to the same exacting standards as the 19 Rim. This exit device complies with most exit door requirements. The 19-V is fully reversible and surface applied. This device is regularly furnished with pullman latch top which contains the deadlocking and latch retraction feature and slide bolt at bottom.
F-19-V Series
Model Description LengthFinish
32D SP28 SP313
F19VEOxxxL Device Only, No Trim • Basic Assembly Long ● ● ●
F19VEOxxxS Device Only, No Trim • Basic Assembly Short ● ● ●Short = 36” Length DeviceLong = 48” Length Device
Reversible Vertical Rod Device F-19-V SeriesFire Exit Hardware
Manufactured to the same exacting standards as the F-19 Rim, the F-19-V Fire Exit Device complies with most exit door requirements. The F-19-V is fully reversible and surface applied. This device is regularly furnished with pullman latch top which contains the deadlockingand latch retraction feature and slide bolt at bottom. (This device is listed by UL for B label fire door installations.)
All Monarch Exit Devices and Trim products meet ANSI 156.3-2001 Grade 1 Standards
xxx - Denotes Finish
19 Series - Exit Devices
visit us online at www.hardwaresuppliers.com
15
XX Series - Exit Devices
XX-R Series
Model Description LengthFinish
10 10B 26D 3 32DXXREOxxxL Device only, No Trim • Basic Assembly Long ● ● ● ● ●XXREOxxxS Device only, No Trim • Basic Assembly Short ● ● ●
Short = 36” Length Device Long = 48” Length Device
Non-Handed Rim Device XX-R SeriesPanic Exit Hardware
The Monarch XX-R Series Rim Device is produced to meet the demanding requirements of higher traffic installations. This device is a single-point, rim type latch with the traditional crossbar design.
All Monarch Exit Devices and Trim products meet ANSI 156.3-2001 Grade 1 Standards
Non-Handed Rim Device F-XX-R SeriesFire Exit Hardware
The Monarch F-XX-R Series Fire Rated Trim Device is produced with the demanding standards required for a quality fire rated device. The investment cast stainless steel chassis, stainless steel latchbolt and standard deadlocking feature provide years of reliable service in higher traffic.
F-XX-R Series
Model Description LengthFinish
3 32DFXXREOxxxL Device Only, No Trim • Basic Assembly Long ●FXXREOxxxS Device Only, No Trim • Basic Assembly Short ●
The EO Device is compatible with all device functions except all L, K and KILShort = 36” Length DeviceLong = 48” Length Device
xxx - Denotes Finish
visit us online at www.hardwaresuppliers.com
16
XX Series - Exit Devices
XX-V Series
Model Description LengthFinish
10 10B 26D 3 32D
XXVNxxxL Device only, No Outside Trim Long ● ● ● ● ●
XXVNxxxS Device only, No Outside Trim Short ● ● ●Short = 36” Length DeviceLong = 48” Length Device
Reversible Vertical Rod Device XX-V SeriesPanic Exit Hardware
The Monarch XX-V Series Vertical Rod Device is produced to meet the demanding requirements of higher traffic installations. The XX-V device is a surface applied (including strikes) vertical rod type with the traditional crossbar design.
F-XX-V Series
Model Description LengthFinish
10 10B 26D 32D
FXXVNxxxL Device only, No Outside Trim Long ● ø ● ● ø ● øø Discontinued When Out of Stock Long = 48” Length Device
Reversible Vertical Rod Device F-XX-V SeriesFire Exit Hardware
The Monarch F-XX-V Series Fire Rated Vertical Rod Device is produced to meet the demanding requirements of higher traffic installations. The F-XX-V is a surface applied (including strikes) vertical rod type with the traditional crossbar design.
All Monarch Exit Devices and Trim products meet ANSI 156.3-2001 Grade 1 Standards
xxx - Denotes Finish
visit us online at www.hardwaresuppliers.com
17
XX Series - Exit Devices
XX-M Series
Model Description LengthFinish
10B 26D 3 32D
XXMEOxxxL Device only, No Trim • Basic Assembly Long ● ● ● ●
Long = 48” Length Device
Reversible Mortise Device XX-M SeriesPanic Exit Hardware
The Monarch XX-M Series Mortise Device offers value with the aesthetic and security of a mortise lock. This device is a single point, mortise latch type featuring the traditionalcrossbar design. The heart of the XX-M device is the Monarch mortise lock which isknown for its reliability and trouble free operation.
All Monarch Exit Devices and Trim products meet ANSI 156.3-2001 Grade 1 Standards
Reversible Mortise Device F-XX-M SeriesFire Exit Hardware
Monarch’s F-XX-M Series Fire Rated Mortise Device offers value with the aestheticand security of a mortise lock. This device is a single point, mortise latch type featuring the traditional crossbar design. The heart of the F-XX-M device is the Monarch mortise lock which is known for its reliability and trouble free operation.
F-XX-M Series
Model Description LengthFinish
10B 26D 3 32DFXXMNxxxL ♦ Device Only, No Trim • Knob by Escutcheon Long ● ø ● ø ● ø ● ø
♦ Specify Handingø Discontinued when Out of Stock
Long = 48” Length Device
xxx - Denotes Finish
visit us online at www.hardwaresuppliers.com
18
XX Series - Exit Devices
F-XX-C SeriesModel Description Length Finish
FXXCNxxxL ♦ Device Only, No Outside Trim Long 32D
♦ Specify Handing Short = 36” Length DeviceLong = 48” Length Device
Reversible Concealed Vertical Rod Device F-XX-C SeriesFire Exit Hardware
The Monarch F-XX-C Series Fire Rated Concealed Vertical Rod Device offers value and aesthetics with the security of two-point latching. The F-XX-C device is a concealed vertical rod type with traditional crossbar design.
Reversible Concealed Vertical Rod Device XX-C SeriesPanic Exit Hardware
The Monarch XX-C Series Concealed Vertical Rod Device offers value and aesthetics with the security of two-point latching. The XX-C device is a concealed vertical rod type with the traditional crossbar design.
XX-C Series
Model Description LengthFinish
10B 32D
XXCNxxxL ♦ Device Only, No Trim • Basic Assembly Long ● ø ● ø
♦ Specify Handingø Discontinued when Out of Stock
Short = 36” Length DeviceLong = 48” Length Device
All Monarch Exit Devices and Trim products meet ANSI 156.3-2001 Grade 1 Standards
xxx - Denotes Finish
visit us online at www.hardwaresuppliers.com
19
Exit Devices - Trim - 18 and XX Series
18 and XX Series
Model Description Lever/Knob Style
Finish10 10B 26D 3 32D
APPOLLO TRIM810DT Dummy Trim • Rim, Surface Vertical Rod, and Mortise ● ●810NL Night Latch • Rim, Mortise ● ●
810TP (MV) Thumbpiece • Key Locks or Unlocks • Surface Vertical Rod, Mortise ●810TP (R) Thumbpiece • Key Locks or Unlocks • Rim ● ●
KNOB TRIM811K Knob • Key Locks or Unlocks • Rim Hana ● ●
811KBE (MV) Knob • Blank Escutcheon • Surface Vertical Rod, Mortise Hana ● ●811KBE (R) Knob • Blank Escutcheon • Rim Hana ● ●
LEVER TRIM812L (MV) Lever • Key Locks or Unlocks • Surface Vertical Rod, Mortise Quantum ● ●812L (R) Lever • Key Locks or Unlocks • Rim Quantum ● ● ●
812LBE (MV) ♦ Lever • Blank Escutcheon • Surface Vertical Rod, Mortise Dane ● ●812LBE(MV) ♦ Lever • Blank Escutcheon • Surface Vertical Rod, Mortise Quantum ● ●812LBE (R) ♦ Lever • Blank Escutcheon • Rim Dane ● ●812LBE (R) ♦ Lever • Blank Escutcheon • Rim Quantum ● ●
812LDT (MV) ♦ Lever • Dummy Trim • Surface Vertical Rod, Mortise Dane ● ●812LDT (R) ♦ Lever • Dummy Trim • Rim Dane ● ●
812LNL (MV) ♦ Lever • Night Latch •Surface Vertical Rod, Mortise Dane ● ● ● ●812LNL (R) ♦ Lever • Night Latch • Rim Dane ● ● ● ●
♦ Specify Handing
XX (Rim, Mortise, Vertical and 3-Point Lock) Trim
Apollo Trim
Dane Quantum
Lever TrimKnob Trim
Hana
All Monarch Exit Devices and Trim products meet ANSI 156.3-2001 Grade 1 Standards
visit us online at www.hardwaresuppliers.com
20
Exit Devices - Trim - 19 Series
19 Series
Model Description Lever Style
Finish26D 32D SP28 SP313 SP28/26D
CONTROL TRIM910DT Dummy Trim ● ●910NL Night Latch ● ● ●910TP Thumbpiece • Key Locks or Unlocks ● ● ●
910TPBE Thumbpiece • Key Locks or Unlocks • Blank Escutcheon ●911K Knob • Key Locks or Unlocks ● ●
912L ♦ Lever • Key Locks or Unlocks Dane ● ●912L ♦ Lever • Key Locks or Unlocks Sutro ●
912LBE ♦ Lever • Blank Escutcheon Dane ●KEY IN KNOB / KEY IN LEVER TRIMS
913KIKKD Knob • Key Locks or Unlocks ●914KILBE Key in Lever • Blank Escutcheon ●914KILIC Key in Lever with IC Core ●914KILKD Key in Lever • Keyed Differently ● ●
914KILNLKD Key in Lever • Night Latch • Keyed Differently ● ●
♦ Specify Handing
19 Series Trim
910 DT910 NL
910 TP910 TPBE
Dane912L
912LBE
Sutro912L
Control Trim
911K 913 KIK 914 KIKKey in Knob/Key in Lever Trim
All Monarch Exit Devices and Trim products meet ANSI 156.3-2001 Grade 1 Standards
visit us online at www.hardwaresuppliers.com
21
Exit Devices - Trim - 19 Series
19 Series Trim
19 Series
Model DescriptionFinish
26D 32D SP28 SP313 SP28/26DTRIDENT TRIM
920NL ♦ Night Latch ●CENTRON TRIM
930EO Exit Only ● ●930C Night Latch Less Pull ● ●
930DT Dummy Trim ● ●930NL Night Latch ● ● ●
♦ Specify Handing
Trident Trim
920NL
Centron Trim
930BE 930C
930DT930NL
All Monarch Exit Devices and Trim products meet ANSI 156.3-2001 Grade 1 Standards
visit us online at www.hardwaresuppliers.com
22
Exit Devices - Strikes
Strikes
Model Description Finish10 10B US19 26D 3 32D
RIM STRIKES490 Adjustable Roller Strike for Rim Devices Unfinished 565 Adjustable surface mounted for use with blade or
applied stops ● ●
F570 Roller Strike for Panic and Fire ●571 Interactive Leaf Strike w/ 2⅞ backset ● ● ●
571A Interactive Leaf Strike w/ 2⅜ backset ● ●579 17R/18R/XXR Strike • Narrow Stiles ● ● ø ●
MORTISE LOCK STRIKES1279 Closed Strike for Panic and Fire Devices ● ● ● ●
F1280 Open Back Strike for Fire Devices Unfinished
1281 Open Back Strike for Panic and Fire Devices ● ● ●
VERTICAL ROD STRIKES (TOP AND BOTTOM)
3788 Surface Vertical Rod for Panic and Fire Devices • Top Strike Unfinished
2130 Surface and Concealed for Panic or Fire Devices • Bottom Strike Unfinished
4155 Surface and Concealed for Panic or Fire Devices • Bottom Strike ● ● ● ●
ø DWO - Discontinued when out of Stock
1279 1280 1281
415521303788
490 565 571/571A 579570
visit us online at www.hardwaresuppliers.com
23
2923 F40234023 4423
Mullions
Model Description Height7’2” 8’ 9’
2923 For use with all rim devices ● ●
4023 For use with all rim devices ● ● ● ø4423 “T” shaped • Includes strikes for 17 Series only ● ●
F4023 Fire rated • Use with F-19-R, F-18-R and F-XX-R ● ● ø
Fittings for MullionsModel Description600154 Top fittings for 4023 Mullion600155 Bottom fittings for 4023 Mullion600156 Top Fittings for 2923 Mullion600157 Bottom Fittings for 2923 Mullion
ø DWO - Discontinued when out of Stock
901159Top Fitting
4003Bottom Fitting
901160Bottom Fitting
Exit Devices - Mullions
visit us online at www.hardwaresuppliers.com
24
PARTS
Model Description Finish10 10B 26D 3 32D SP28 SP313
Rim Exit Hardware581 Backplate Sub Assembly Unfinished
885 ø 18 Center Case Assembly • EO Function • Fire-rated Unfinished
3755 Knob Hub Unfinished
4972 Knob Hub for 18R (Simplex)
Mortise Lock Assembly4067 Locking Arm Assembly Unfinished
3519 Knob Hub Unfinished
3542 Cylinder Operating Arm Unfinished
Surface Vertical Rod Exit Device4232 18 Knob Hub Unfinished
4783 Rod Guide Black
4973 Knob Hub for 18-V (Simplex) Unfinished
3775 Knob Hub (XX Series) Unfinished
ø DWO - Discontinued when out of Stock
581
855 3519
3542
3755
4232 4783
3775
Exit Devices - Parts
visit us online at www.hardwaresuppliers.com
25
Miscellaneous Hardware and Accessories
Model DescriptionFinish
10 10B 26D 3 32D SP28 SP313
COVER PLATES
4167 For 19 Series “T” and “DT” Control ● ø ● ø ●
4168 For 19 Series “Blank Outside” ● ● ø ● ø
4170 For 19 Series ‘K” , “L”, “DT-K”, “DT-L” control ● ø ●
SEX BOLTS
2729F Flat Head • 10-24 x ¾ “ FPHMS ● ● ● ●
2729P Pan Head • 10-24 x ¾ “ PPHMS ● ● ● ●
4122 ¼ - 20 x ¾” PPHMS ● ●
MORTISE LOCKS
8500 TP RHR Thumbpiece Function • RHR ●
SHIM KITS
SK18RMC ¼” Thick • For Rim, Mortise or Concealed Devices • (18 Series)
UnfinishedSK18V1 ¼” Thick • For Vertical Devices • (18 Series)
SK19R ¼” Thick • For Rim, Mortise or Concealed Devices • (19 Series)
SK19V1 ¼” Thick • For Vertical Devices • (19 Series)
4168 41704167
Sex Bolt w/ Screw
Exit Devices - Miscellaneous Hardware and Accessories
visit us online at www.hardwaresuppliers.com
26
Miscellaneous Hardware and Accessories
Model Description Finish10 10B 26D 3 32D SP28 SP313
CYLINDER DOGGING KITS17CDK3 17 Series Cylinder Dogging Kit • 3’ Device (Short) ● ●17CDK4 17 Series Cylinder Dogging Kit • 4’ Device (Long) ● ●18CDK3 18 Series Cylinder Dogging Kit • 3’ Device (Short) ● ● ● ● ø18CDK4 18 Series Cylinder Dogging Kit • 4’ Device (Long) ● ● ● ● ● ●19CDK3 19 Series Cylinder Dogging Kit • 3’ Device (Short) ● ø19CDK4 19 Series Cylinder Dogging Kit • 4’ Device (Long) ● ● ●
193 Dogging Sub Assembly UnfinishedCYLINDER MOUNTING KITS
94121 Rim Cylinder Mounting Kit Unfinished94131 Mortise Cylinder Mounting Kit Unfinished
ARMED EXIT COMPONENTSEAKxxxL Retro Battery Alarm Kit • Long ● ● ● ● ●EAKxxxS Retro Battery Alarm Kit • Short ● ● ●
HW Hard-Wire Adaptor for field installation to eliminate 9 volt battery Unfinished
MISCELLANEOUS650006 Extension Rod • 12” ● ● ●650007 Extension Rod • 24” ●9452530 Extension Rod • 12” ● ●900479 Bottom Bolt and Rod Assembly ●4326 Lever Spring Clip Unfinished2789 7/32” Hex Dogging Key Unfinished1277 Coordinator ● ø ● ●1278 Carry Bar ● ø ● ●
ø DWO - Discontinued when out of Stock
Exit Devices - Miscellaneous Hardware and Accessories
901199000 Retrofit Kit for 18/XX-R Unfinished901205000 Retrofit Kit for 18-V Unfinished
901180 Crossbar Retainer Screw • ¼” - 20 X 1/4 FHH Cap Screw UnfinishedAPBP Appollo Blank Plate ●
visit us online at www.hardwaresuppliers.com
27
4327xxx Plate, Pull side mount l l l
4357xxx Plate, Parallel arm mount l l l
“xxx” denotes finish
Applications• SC60 closers are suitable for interior doors from 30” to 60” wide and exterior doors up to 42” wide.• SC61 closers are suitable for interior doors up to 48” wide and can be adjusted to meet the ADA accessibility requirements
SC 60 Finish
Item # Cylinder Arm Fastener Pack 689 695 696
SC60 SERIES
SC60FULLxxx Standard Rw/PA l l l
SC60FULLxxxDSHO Standard Rw/PA TBWMS l l
SC61 Series
SC61Fullxxx Standard Rw/PA l l l
SC61HFULLxxx Standard Hw/PA l l
INSTALLATION ACCESSORIES
Easy to install in most common mounting conditions• Complete, ready to mount in the installer’s choice of hinge side, top jamb or parallel arm configuration on either right or left-hand swinging doors.• Provided with fasteners for wood, hollow metal and aluminum doors and frames.• Through bolts available for installations on hollow core, 1-3/4” thick doors.• Can be templated to allow a full 180 degree opening swing.• Fit the 1-3/4” face frames and narrow top rails common on many aluminum storefront doors.• Consistent closing times over temperatures ranging from 120 degrees F to 10 degrees F
Cross Reference by ApplicationStandard A 156.4 Grade 1 (typically with cover) Grade 1 (typically without cover)Dor-o-matic SC80 (70)*, SC81 SC60*, SC61Norton P8300 (P8500)* P1600BC*Yale P3300 (P3500)* P51BC*Dorma P7600 (8900) 640BCPA*Corbin 3210M76 (3210)Sargent 1250 (1430)Arrow 6000 (7000) 1000
*Indicates Identical Footprint
Door Closers
SC 60 SeriesSurface Door Closers
visit us online at www.hardwaresuppliers.com
28
Applications• SC80 closers are suitable for interior doors from 30” to 60” wide and exterior doors up to 42” wide.• SC81 closers are suitable for interior doors up to 48” wide and can be adjusted to meet the ADA accessibility requirements
4345xxx Plate, Pull side mount l l l
4348xxx Plate, Parallel arm mount l l l
“xxx” denotes finish
SC 80Finish
Item # Cylinder Arm Fastener Pack 689 695 696
SC80 Series
SC80FULLxxx Standard Rw/PA l l l
SC80FULLxxxDEL Delayed Action Rw//PA l l
SC80FULLxxxDSHO Standard Rw/PA TBWMS l l
SC80SLIMxxx Standard Rw/PA l l l
SC81 Series
SC81Fullxxx Standard Rw/PA l l
SC81HFULLxxx Standard Hw/PA l l
SC81FULLxxxDEL Delayed Action Rw/PA l l
SC81SLIMxxx Standard Rw/PA l l
INSTALLATION ACCESSORIES
Applications• SC91 closers are suitable for lightweight interior doors and are preset. They meet the ADA accessibility requirements.
SC 91Finish
Item # Cylinder Arm Fastener Pack 689 695 696SC91xxx* Standard Rw/PA l l
“xxx” denotes finish*No cover is available for the SC90 series closers
Door Closers
SC91 SERIESSurface Door Closers
SC80 SERIESSurface Door Closers