Post on 31-May-2020
42 Fluid Mechanics & Machinery
CHAPTER 2
Pressure and Pressure Measuring Devices
INTRODUCTION
The main properties of fluids, which are considered in real-time applications are pressure, velocityand temperature. Pressure and temperatures play a major role in the fields of pipeline constructions,water supply, hydraulics for irrigation, thermal power, hydraulic power, aviation of flights and evenin human blood, etc. Fluids under pressure can exert forces that can be used by us to do work.Fluids form the basis for pneumatic and hydraulic systems which are used in industries such asautomobile manufacturing (brakes), hoists found in service stations, dentist’s chair, aeronautics,submarines, the shipping industry and the list can go on and on.
A small pressure, spread over a very large area, can add up to be very large force. When a fluidmoves over or through an object; it gives small pushes on the surface of the object. These pushes,over the entire surface, are defined as pressure and are measured as force per unit area.
To understand the fluid flow, we need to study the fluid properties like pressures, velocity andtemperature. And we deal with study of pressure and its ways of measuring, in this section.
PRESSURE OF A FLUID (P)
All fluid molecules will be in constant and random motion called “Brownian motion”, due to whichfluid at rest in a vessel, does exerts force on all the walls of the vessel, with which it is in contact,
Liquid atrest in
a vessel
Figure 2.0
Pressure and Pressure Measuring Devices 45
Consider a liquid drop element in shape of a wedge with unit thickness (i.e. 1zδ = ), havingtwo triangular faces ,ABC A B C′ ′ ′ and three rectangular faces , ,AA CC AA BB BB CC′ ′ ′ ′ ′ ′ as shownin the Figures 2.3a and 2.3b.
Let pressure intensities , ,xz y z zp p p be acting along the three rectangular faces.
Let total pressures acting along faces , ,AA BB BB CC AA CC′ ′ ′ ′ ′ ′ be , ,xz yz zP P P respectively.
Then total pressure ( )'* *xz xzP p AB BB= ( )since *xz xzP p area=
( )* *1xz xzP p xδ⇒ = (2.3a)
Similarly, total pressure ( )'* *yz yzP p BC BB= ( )since *yz yzP p area=
( )* *1yz yzP p yδ⇒ = (2.3b)
Similarly, total pressure ( )'* *z zP p AC AA= ( )since *z zP p area=
( )* *1z zP p AC⇒ = (2.3c)
Under equilibrium condition, sum of all forces is equal to zero in horizontal and vertical directions.i.e.
0x yF F= =∑ ∑
Hence, for sum of forces along horizontal direction is 0xF =∑
i.e. * (sin )yz zP P θ=
( ) ( ) ( )* *1 * *1 * sinzyzp y p ACδ θ⇒ =
yz zp p⇒ = (2.4)
since *siny ACδ θ=
PZC
B
PXZ
C1
Pyz
x
y
z
B1
A1
�y
�z
�xA
PZPxz
Pyz
C
Pyz
BA�
�y
�x
PXZ
Figure 2.3a Figure 2.3b
46 Fluid Mechanics & Machinery
Similarly, for sum of forces along vertical direction is 0yF =∑
l.e. * (cos )xz zP P θ=
( ) ( ) ( )* *1 * *1 * coszxzp x p ABδ θ⇒ =
xz zp p⇒ = (2.5)
since * cosx ABδ θ= .
So. from Eq. (2.4) and Eq. (2.5), we get
xz yz zp p p p= = = (2.6)
Hence, Pascal’s law is proved and is independent of the wedge angle θ or independent of surfaceangular orientation and is a scalar quantity.
Example 2.1: Find the weight that can be lifted by a hydraulic press when the force applied at theplunger is 350 N and has diameters of 250 mm and 40 mm of ram and plunger respectively.
Solution: Given data:350N, 0.25m, 0.04mram plungerF d d= = =
Area of the ram2 2
23.14 * 0.25 0.049m4 4ram
ramdA π
= = =
Area of the plunger2 2
23.14*0.04 0.001256m4 4plunger
plunger
dA
π= = =
Normal pressure intensity due to the force applied
350 278.6kPa0.001256plunger
Fp A= = =
W
F
Ram
Plunger
P
Figure P2.1
Pressure and Pressure Measuring Devices 47
As the pressure intensity due to the force in the plunger lifts the weight, so the total pressureacting on the weight in the ram must be equal or greater to the weight, and hence
ram
Wp A=
* 278.6 * 0.049 13.65kNramW p A⇒ = = =
HYDROSTATICS LAW : VARIATION OF PRESSURE IN A STATIC FLUID
Hydrostatic law defines the variation of pressure with respect to the elevation of fluid particlesunder static condition and states that “as the distance from a datum surface level increases thepressure drops”. When an object pushed in a fluid to its bottom, it compresses the fluid. so therearise an increase in pressure force around it and is termed as “Hydrostatic force.”
A projectile soaring higher altitudes from earth surface experiences decrease in pressure andsimilarly underwater missiles experience increase in hydrostatic force as it penetrates into the depthsof sea waters, as illustrated in the below pictures.
Atmosphere P
P + dPz1
z2
Decrease in pressure whilesoaring higher altitudes
Sea Water
P + dP
Target
P
Increase in pressure while targeting beneath altitudes
Bottom level of Sea
Miss
ile
Ship surface
Earth surface
Similarly, a diver experiences more pressure as he goes down to the depths of the sea levels andsimilarly a tumbled mug when pushed to bottom of a water filled bucket, experience more upwardforce and this can be proved by taking a cylindrical fluid element having an area and length as
,dA ds respectively, at some height from the datum, as shown in Figure 2.4.The cylindrical element will be subjected to pressure force at one end with height 1z is P and at
the other end of height 2z is P dP+ and also the weight of the fluid element dw which acts verticallydownwards.
Under equilibrium of the element, the resultant of forces in any direction is zero and resolvingthe forces in the direction along the central axis gives
48 Fluid Mechanics & Machinery
( ) ( ) ( )* * * * cos 0P dA P dP dA g dA dsρ θ− + − =
By rearranging
( ) ( )* *cosdP g dsρ θ= −
( )* cosdP gds
ρ θ⇒ = − (2.7)
Note:Case 1: If the cylindrical fluid element is vertical, then the angle of orientation 0oθ = , then Eq.(2.7) becomes.
( )dP Pggdz RT
= − = −
ρ (2.7a)
so on integrating we get
0 *gZ
RTP P e−= (2.7b)
(P+dP)
ds
dA
z1
Pz2
dw = p*g*dA*ds
�
Figure 2.4: Cylindrical fluid element with an arbitrary orientation in a container
(P)
ds
dA
z1
z2
p + dP
dw
Liquid(P)
ds
dA
z1
z2
Liquid
(P) (P)
Figure 2.4a: Cylindrical fluid element subjected tovariation of pressure through out its length
Figure 2.4b: Cylindrical fluid element subjected touniform pressure through out its length
Pressure and Pressure Measuring Devices 49
From Eq. (2.7) it is evident that when a diver dives into sea, the datum elevation will be reducing, ashe goes into the depths of the sea and hence the pressure increases at the depths.
Case 2: If the cylindrical fluid element is horizontal, then the angle of orientation θ = 90° thenEq. (2.7) becomes
0dPdz
= (2.7c)
and so pressure is constant (i.e. P = constant) throughout in a static liquid, at a given height.
PRESSURE HEAD ( )h
When pressure expressed in terms of the height of fluid raised/fallen is called fluid “Pressure head”.A diver experiences more pressure as he goes below the sea level, due to reason of hydrostaticforces which increases the level of fluid by an amount equal to pressure raise and is expressed as“mm of Hg” on “meters of water”.
If considered a cylindrical bar of length L and cross-section area A immersed in a water/liquidwith an inclination θ, as shown in figure.
Under equilibrium conditions sum of all the forces acting on the cylindrical bar is equal to zeroand hence there will be three forces acting like pressure forces ( )( )1 1,P A P P A+ ∆ at both the endsand weight force coslAγ θ due to the weight of the cylindrical bar.
Then ( )1 1 cos 0P P A P A lAγ θ+ ∆ − − =
But cosh L θ= so 1 2 0P A P A Ahγ− − =
Phγ∆
⇒ = (2.7d)
where γ is specific weight of liquid, h is depth or else called pressure head.
P + P1 �
Free surface
LiquidZ
A
L
P1
h�
dw = p*g*dA*L
Figure 2.5: Cylindrical bar immersed in a liquid
Pressure and Pressure Measuring Devices 51
W
Ram
Plunger0.3
m
F
p
Figure P2.7
b) Height of Mercury Barometer atmP ghρ=
101000 13600*9.81*0.75m of mercury
hh
⇒ =⇒ =
Example 2.6: An oil of specific gravity 0.8 is under pressure of 137.2 kPa, then determine pressurehead expressed in terms of meters of oil.
Solution: Given data: 31000kg/m , 137.2kPa, 0.8water gaugeP Sρ = = =
Pressure head gauge oilP ghρ=
*gauge waterP S ghρ⇒ =
137.2*1000 0.8*1000 *9.81*17.48m of oil
hh
⇒ =⇒ =
So pressure head in terms of oil is 17.48 m.
Example 2.7: Find the weight that can be lifted by a hydraulic press when the force applied at theplunger is 350 N and has diameters of 250 mm and 40 mm of ram and plunger respectively, take thespecific weight of the liquid in the press as 1000 N/m3.
Solution: Given data:
3
350 N,d 0.25m, 0.04m
1000 N/m , 0.3ram plungerF d
hγ
= = =
= =
Area of the ram2 2
23.14* 0.25 0.049m4 4ram
ramdA π
= = =
52 Fluid Mechanics & Machinery
Area of the plunger2 2
23.14*0.04 0.001256m4 4plunger
plunger
dA
π= = =
Normal pressure intensity due to the force applied in the plunger
350 278.6kPa0.001256plunger
Fp A= = =
As the level of force and weight are not of the same and so there exists a pressure intensity due tohead of 0.3 m height in the plunger then the total pressure intensity on the weight will be
350 1000*0.3 278.96kPa0.001256plunger
Fp hA γ= + = + =
As the total pressure intensity due to the force in the plunger lifts the weight, so the total pressureacting on the weight in the ram must be equal or greater to the weight, and hence
* 278.96*0.049 13.669kNram
ram
Wp AW p A
=
⇒ = = =
Types of Pressure Measuring Devices
a) Manometersb) Mechanical gages.
Manometers
Simplemanometers
Piezometer
Single column/Micro Manometer
InvertedU-Tube
Mechanicalgages
Bourdan tubegage
Bellowgage
Diaphragmgage
Dead weightgage
U-Tube
U-Tube
Types of pressure measuring devices
Differentialmanometers
Figure 2.6: Different types of pressure mesuring devices
Pressure and Pressure Measuring Devices 53
Manometers
Manometer is a device used to measure pressure at a single or multiple points in a single or multiplepipelines, by balancing the fluid column by the same or another column of fluid. Manometers can becategorized into two types, namely simple manometer and differential manometer. Simple manometricdevices measure pressure at a single point in a fluid, whereas differential manometric devicesmeasure pressure at two or more number of points, in a single or multiple flow lines.
The simplest type of manometer is simple manometers, wherein we have three types of simplemanometers like Piezometer, U-tube manometer and Single column/Micro manometer. Simplemanometers consist of a glass tube straight or bent, whose one end is connected to the point atwhich the measurement of pressure is required and the other end is left open to the atmosphere.
A. Piezometer
Piezometer is a simple manometric device which measures pressure at a point in a fluid, withoutbalancing any other fluid column.
Consider a cylindrical vessel having a fluid filled in it and is open to atmosphere. Connect apiezometer glass tube as shown in Figure 2.7, at the point where pressure is to be measured, suchthat the other end of the piezometer tube is open to the atmosphere. As soon as the piezometer glasstube is connected to the cylindrical tank, some amount of the fluid rushes into the tube, due toatmospheric pressure outside the cylindrical tank. But as the other end of the piezometer glass tubeis exposed to atmosphere, atmospheric pressure acts at that open end also and hence fluid raises upto some level in the glass tube and does not overflow from the tube.
Liquidin a
vessel
Patm Patm
Piezometricglass tube
h
A
Figure 2.7: Piezometer
If pressures considered in the cylindrical vessel ( )atm AP P+ and piezometer tube ( )atmP hγ+then they will be equal, due to which the overflow of fluid does not take place,
i.e. atm A atmP P P hγ+ = +
AP hγ⇒ = (2.8)
where PA is the pressure at the point “A” where pressure is required to measure in an open containerand (γh) is the specific weight of the fluid raised in the piezometer column.
Figure 2.7a: Piezometer connected to pipeline
Patm
Piezometricglass tube
A
PA
h
Fluid in pipe
54 Fluid Mechanics & Machinery
If the container is not an open one, for instance like a pipeline and if a piezometer is connectedto it, as shown in the Figure 2.7a, to find the pressure inside the pipeline, the hydrostatic pressureequation varies. i.e.
A atmP P h= + γ (2.8a)
And if needed in terms of pressure heads, dividing the Eq. (2.8a) with the specific weight of water
( )waterγ , we get
10.3A atmh h Sh Sh⇒ = + = + (2.8b)
Hence, Eqs. (2.8), (2.8a) and Eq. (2.8b) are the equations of hydrostatic pressure and hydrostaticpressure head.
B. U-tube Simple Manometer
U-tube manometer is a simple manometric device used to measure pressure at a point in a fluid, bybalancing the fluid column by the same or another column of fluid. It has a glass tube bent in “U”shape with some amount of same or other type of fluid, called manometric fluid like mercury, asshown in Figures 2.8a and 2.8b.
Consider a pipe carrying a fluid called “fluid 1” with specific weight 1γ and let pressure PA tobe measured at a point “A” in the pipe. Let the manometric fluid have specific weight 2γ - As theU-tube manometer is connected to the pipe, the “fluid 1” rushes into the U-tube and pushes themanometric fluid upwards in the other limb of the U-tube, due to which the initial manometric fluidlevel as shown in Figure 2.8a is disturbed and lowers in the left limb and raised up with a pressurehead “h2” in the right limb of U-tube.
Let the fluid 1 in pipe occupy the U-tube column in the left limb, of height “h1” and let themanometric fluid in U-tube be raised up to a height “h2”, in the right limb.
Due to the push given by the fluid 1 onto the manometric fluid, the manometric fluid may over-flow but it does not happen due to the reason that the atmospheric pressure acts on the open end ofthe U-tube, as shown in Figure 2.8b.
Fluid 1in the pipe
PA
A
Manometricfluid
x1x1
xx
h1
h2
Figure 2.8b: After connecting the U-TubeFigure 2.8a: Just before connecting the U-Tube
Fluid 1in the pipe
PA
A
Manometricfluid
xx
Pressure and Pressure Measuring Devices 55
Fluid 1in the pipe
PA
A
Manometricfluid
x1x1
h1
h2
Under equilibrium the pressures on the left limb of U-tube must be equal to the pressures in theright limb, so
1 1 2 2A atmP h h Pγ γ+ = + (2.9)
1 1 2 2A w w atmP S h S h P⇒ + = +γ γ (2.9a)
2 2 1 1A
w
P h S h Sγ
⇒ = − meters of water (2.9b)
2 2 1 1h S h h S∴ = − (2.10)
orIf hydrostatic pressure is considered, then
2 2 1 1 10.3h S h h S= − + (2.10a)
Where h is the pressure head at the point “A” where pressure is required.
Example 2.8: Pipeline carrying water has a connection of a mercury manometer connected to itand the readings are measured as shown in Figure P2.8. Find the pressure of the water flowing inthe pipeline.
Solution: Given data:
1 20.1m, 0.8m, 1, 13.6water Mercuryh h S S= = = =
Equating the pressure heads on both sides of the limbs of the manometer, we have
1 2
0.8*13.6 0.1*1 10.78mwater Mercuryh h S h S
h+ =
⇒ = − =
So pressure in the pipeline will be 1000 *9.81*10.78 105.75kPaA waterP ghρ= = =
If hydrostatic pressure is considered, then we have ( )10.3 206.75 kPaA waterP g h= + =ρ
Figure P2.8
Pressure and Pressure Measuring Devices 57
1 2 00.3*1 0.5*13.6 7.1m
water Mercuryh h S h Sh+ + =
⇒ = − − = −
So pressure in the pipeline will be
1000 *9.81* 7.1 69.651kPaA waterP ghρ= = = (vaccum)
If hydrostatic pressure considered, then we have
( )10.3 1000*9.81*3.2 31.4 kPaA waterP g h= + = =ρ
Example 2.11: A funnel connected to a U-tube mercury manometer having water in it, as shown inFigure P2.11a. The other end of the manometer is exposed to atmosphere. The level of mercury is
Manometricfluid
xx
h1
h2
2.5
m
1m dia
Funnel
Manometricfluid
xx
h1
h+
z2
2.5
m
1m dia
Funnel
x1 x1
z
Figure P2.11a Figure P2.11b
Fluidin the pipe
PA
A
Manometricfluid
x1x1
h1
h2
Figure P2.10
58 Fluid Mechanics & Machinery
0.25 m from the reference line. If the funnel is filled with water, find the level of manometerreadings.
Solution: Given data:
2 0.25m, 1, 13.6water Mercuryh S S= = =
When the funnel is empty: Observe Figure P2.11a.Equating the pressure heads on both sides of the limbs of the manometer, we have
1 2
1 0.25*13.6 /1 3.4 mwater Mercuryh S h Sh
=⇒ = =
Hence, the level of the water column above the reference is 3.4 m, when the funnel is empty.
When the funnel is filled completely: Observe Figure P2.11b. The reference line moves to newposition to X1-X1 and so by equating the pressure heads on both sides of the limbs of the manometer,we have
( )1 22500 23.4 *1 2500 0.25*13.6 2 * *13.6
95.4mm
water Mercuryh S z h z Sz z
z
+ + = +
⇒ + + = +⇒ =
Hence, the reading of manometer is 95.4 mm.
Example 2.12: Figure below shows a gasoline tank in a car, which reads proportional to the bottomgage. The tank is 30 cm deep and accidentally contains 1.8 cm of water in addition to the gasoline.Determine the height of air remaining at the top when the gauge erroneously reads full. Assume
3 30.0118kN/m , 6.65kN/mwater mercuryγ γ= =
Solution: Given data: 3 30.3m, 0.0118kN/m , 6.65kN/mwater mercuryh γ γ= = =
When the tank is full of gasoline, then * 6.65*1000* 0.3 1.995kPa.gauge gasolineP hγ= = = When thetank contains 1.8 cm of water then the sum of pressure created due to presence of air, gasoline andwater must be equal to tank with full gasoline, so as to have erroneous reading and hence
Air
Gasoline
Water
30
cm
hair
hgauge
hgasoline
1.8
cm
Figure P2.12
Pressure and Pressure Measuring Devices 59
Air gasoline water GageP P P P+ + =
* * * 1.995kPaAir Air gasoline gasoline water waterh h hγ γ γ⇒ + + =
( )0.0118* 6.65* 0.3 0.018 9.81*0.018 1.995kPaAir airh h⇒ + − − + =
0.857 cmAirh⇒ =
Hence, the height of air remaining at the top is 0.857 cm.
c) Single Column/Micro-manometerSingle column/micro-manometers are just similar to the U-tube manometer, only with a differenceof having a small reservoir in the tube, as shown in Figures 2.9a and 2.9b.
Micro-manometer has a glass tube bent in “U” shape or inclined and has a small reservoir in thetube, having some amount of same or other type of fluid called manometric fluid. Consider a pipe
PA
A
Fluid 1in pipe
x x
Manometricfluid
Patm
Figure 2.9a: just before connecting micro-manometer
PA
A
Fluid 1in pipe
x x
Manometricfluid
Patm
h1
�hx1
x1
h2
Figure 2.9b: After connecting micro-manometer
PA
A
Fluid 1in pipe
Fluid 2
L
�h =L sin2 �
Figure 2.9c: Inclined micro-manometer
Pressure and Pressure Measuring Devices 61
If a<<<<A, then 0aA≈ which give
2 2 1 1h h S h S= − (2.13b)
If the tube is inclined to the reservoir at angle α as shown in Figure 29c, then 2 sinh l α= and so
( )2 1 2 1 1sin sinah l S S l S h SA
α α= − + − (2.14)
And if 0aA≈ then 2 1 1sinh l S h Sα= − (2.14a)
Example 2.13: A micro-manometer having a ratio of reservoir to limb areas as 40 was used todetermine the pressure in a pipe containing water. Determine the pressure in the pipe for manometerreadings, as shown in Figure P2.13.
Solution:Given data:
1 2
1, 13.6, 101kPa, 40
50 mm, 80 mm
water mercury atmAS S P a
h h
= = = =
= =
Equating the pressure heads on both sides of the manometer limbs, we have
( )2 2 1mercury water mercury waterah h S S h S h SA = − + −
PA
A
Waterin pipe
x x
Manometricfluid
Patm
50
mm 8
0m
m
Figure P2.13
62 Fluid Mechanics & Machinery
( )1 0.08 13.6 1 0.08*13.6 0.05*140h⇒ = − + −
1.06m of waterh⇒ =
So pressure in the pipe will be
9.81*1.06 10.4 kPawaterP hγ= = =
Example 2.14: An inclined micro-manometer having a ratio of reservoir to limb areas as 10 wasused to determine the pressure in a pipe containing water. Determine the pressure in the pipe formanometer readings, if the inclination of the manometer limb has a slope of 4:1, as shown in FigureP2.14.
Solution:Given data:
1, 13.6, 10, 0.25mwater mercuryAS S la= = = =
1 50 mmh =
2 sin 0.25*sin14 0.06mh l α= = ° =
Equating the pressure heads on both sides of the manometer limbs, we have
[ ]2 1 2 1 1sin ( ) sinah l S S l S h SA α α = − + −
( )1 0.06 13.6 1 0.06 *13.6 0.05*110h⇒ = − + −
0.84m of waterh⇒ =So pressure in the pipe will be
9.81* 0.84 8.25kPawaterP hγ= = =
x
PA
A
Waterin pipe 0.
25m
Mercury�
1
4
50
mm
x
Figure P2.14:
64 Fluid Mechanics & Machinery
where γ is the specific weight of fluids.
1 1 2 2 3 3A w w w BP S h S h S h Pγ γ γ⇒ + = + + (2.15)
sincew
S γγ
=
where 1 2, ,w S Sγ are specific weight of water and specific gravities of fluids
respectively. By rearranging and dividing by wγ throughout, we get
( )3 3 2 2 1 1
A B
w
P Ph S h S h S
γ−
= + − (2.16)
meters of water. When written in terms of pressure heads, we get
( ) 2 2 3 3 1 1A Bh h h S h S h S− = + − (2.17)
If the “fluid 1” and “fluid 2” are of same kind, then S1 = S3.
( ) ( )2 2 1A Bh h h S S− = − (2.17a)
Example 2.15: Find the pressure difference at two points A and B in the pipe carrying water andconnected to a mercury differential manometer and also has oil filled in between it, as shown infigure P2.15. Take 3 3 310 kN/m , 136 kN/m , 8.5kN/mwater mercury oilγ γ γ= = =
Solution: Given data: 3 3 310 kN/m , 136 kN/m , 8.5kN/mwater mercury oilγ γ γ= = =
Equating using differential manometer equations, we have
*1.08 * 0.72 * 0.48 *0.6 *0.36A water mercury oil mercury water BP Pγ γ γ γ γ+ − + − − =
10 *1.08 136 *0.72 8.5*0.48 136* 0.6 10* 0.36 168.2kPaA BP P⇒ − = − + − − =
Hence, the pressure difference between two points is 168.2 kPa.
A
PA
A
PA
Oil
0.6
m
0.4
8m
0.7
2m
Manometricfluid
1.0
8m
Water
0.9
6m
Water
Manometricfluid
Figure P2.15
Pressure and Pressure Measuring Devices 65
Example 2.16: Two pipes A and B contain carbon tetrachloride of specific gravity 1.59 at 103 kPapressure and oil of specific gravity 0.8 at 171.6 kPa respectively. The manometric liquid is mercury.Find the difference “h” between the levels of mercury.
Take 2 1.594, 13.6, 0.8ccl mercury oilS S S= = =
Solution: Given data:
2 1.594, 13.6, 0.8
103kPa, 171.6kPaccl mercury oil
A B
S S S
P P
= = =
= =
Equating the pressure heads on both sides of the manometer limbs, we have
24* * * *1.5A ccl mercury oil oil Bh S h S h S S h+ + = + +
24* * * *1.5A Bccl mercury oil oil
water water
P PS h S h S Sγ γ+ + = + +
103 171.64*1.59 *13.6 *0.8 0.8*1.59810 9810
h h+ + = + +
103 171.64*1.59 *13.6 * 0.8 0.8*1.59.81 9.81h h+ + = + +
402 mmh⇒ =
Hence, the difference in mercury levels is 402 mm.
A
Carbontetrachloride
Oil
PA
PB
x x
Mercury
4m
1.5
m
B
x1x1
h
Figure P2.16
Example 2.17: Two pipes A and B contain water and air above in pipe A with 78.5 kPa pressure ofair and oil of specific gravity 0.8 in pipe B respectively. The manometeric liquid is mercury. Find thepressure in pipe B (absolute). Take 101kPaatmP =
Solution: Given data: Swater= 1, Smercury = 13.6, Soil = 0.8
66 Fluid Mechanics & Machinery
PA = 78.5 kPa, Patm =101 kPa
Equating the pressure heads on both sides of the manometer limbs, we have5* 1* 1.2 *A water mercury oil Bh S S S h+ = + +
5* 1* 1.2*A Bwater mercury oil
water water
P PS S Sγ γ+ = + +
78.5 5*1 1*13.6 1.2* 0.89.81 9.81BP+ = + +
15.3 kPa ( )BP vacuum⇒ = −
( ) 101 15.3 85.7 kPaatm BB absoluteP P P⇒ = + = − =
Hence, the pressure inside the pipe B is 85.7 kPa (absolute).
b) Inverted Differential U-tube Manometer: Inverted differential U-tube manometer is a devicejust as same that of U-tube differential manometer but is inverted in construction. It measurespressure difference ∆P at two different points “A” and “B” in a single pipe or different pipes,carrying two fluids of same or different kinds, as shown in Figure 2.11a. As small change in
A
Fluid 1in pipe 1
Fluid 2in pipe 2
PA PB
xx
Manometricfluid
B
x1x1
h3
h1
h2
Figure 2.11a: Just before connecting inverteddifferential U-tube
A
Fluid 1in pipe 1
Fluid 2in pipe 2
PA PB
xx
Manometricfluid
B
Figure 2.11b: After connecting inverted differentialU-tube
A
Water
Oil
PA
PB
x x
Mercury
4m
1.2
m
B
1m
x1 x1
Figure P2.17
68 Fluid Mechanics & Machinery
Example 2.18: Find the absolute pressure in the pipe A carrying an oil having specific gravity of 0.8and has a mercury manometric fluid, as shown in figure P2.18. Take
1 2 30.66 m, 0.3m, 0.165mh h h= = =
4 0.11m, 105kPaatmh P= =
Solution: Given data:0.8, 13.6, 1oil Mercury WaterS S S= = =
1 2 30.66 m, 0.3m, 0.165mh h h= = =
4 0.11m, 105kPaatmh P= =
Equating using differential manometer equations, we have
( )4 3 3 2 1A oil mercury mercury water atmP h h h h h Pγ γ γ γ= + − − + +
( )0.88*9.81* 0.11 0.165 13.6*9.81*0.165 1.6*9.81*0.33 9.841*0.66 105 88.6AP kPa= + − − + + =
Hence, pressure in the pipe is 88.6 kPa.
A
PA
Water
x1x1
h1h2
h3
Manometricfluid
Oil inthe pipe
h4
Figure P2.18
Example 2.19: A pipe has two points A and B and carries water and is connected to an inverted U-tube differential manometer having manometeric liquid as mercury. Find the difference in pressuresat the two points A and B in absolute. Take atmospheric pressure as 101 kPa, as shown in FigureP2.19
Solution: Given data: 1, 13.6water mercuryS S= =
Equating the pressure heads on both sides of the manometer limbs, we have
1.7 * 0.8* 0.8 0.7 *A water water mercury water Bh S S S S h+ + = + + +
70 Fluid Mechanics & Machinery
4 * 1* 1* 1.2*A water mercury oil oil Bh S S S S h+ + = + +
4* 1* 1* 1.2*A Bwater mercury oil oil
water water
P PS S S Sγ γ+ + = + +
78.5 4*1 1*13.6 1* 0.8 1.2* 0.89.81 9.81BP+ + = + +
139.7 kPaBP⇒ =
Hence, the pressure at the point B in the second pipe is 139.7 kPa.
Example 2.21: An inverted differential U-tube manometer having an oil of specific gravity 0.8 asmanometeric liquid is connected to two different pipes carrying water under pressure. Determinethe pressure in pipe B, if the pressure head in the pipe A is 2.0 m of water as shown in Figure P2.21.
Solution: Given data: Soil = 0.8, HA = 2.0 m
Equating the pressure heads on both sides of the manometer limbs, we have
( ) 0.15 * 0.1* 0.3*B A oil water waterh h S S S− = + −
( )2.0 0.15*0.8 0.1*1 0.3*1Bh⇒ − = + −
1.92 mBh⇒ =
* 1.92*9.81 18.8kPaB B waterP h γ⇒ = = =
Hence, the pressure at the point B in the second pipe is 18.8 kPa.
A
Water
PA
PB
xx
B
Water
Oil
x1 x1
0.15m
0.1
m
0.3
m
Figure P2.21
72 Fluid Mechanics & Machinery
EXERCISE
Objective
1. In a static fluida) Resistance to shear stress is smallb) Fluid pressure is zeroc) Linear deformation is smalld) Only normal stresses can existe) Viscosity is nil
2. Liquids transmit pressure equally in all the directions. This is according to thea) Boyle’s lawb) Archimedes’ principlec) Pascal’s lawd) Newton’s formula
3. Manometer is used to measurea) Pressure in pipes, channels, etc.b) Atmospheric pressurec) Very low pressuresd) Difference of pressure between two pointse) Velocity
4. Gage pressure is equal toa) Absolute pressure + atmospheric pressureb) Absolute pressure – atmospheric pressurec) Atmospheric pressure – absolute pressured) Atmospheric pressure – vacuume) Atmospheric pressure + vacuum
5. Piezometer is used to measurea) Pressure in pipes, channelsb) Atmospheric pressurec) Very low pressuresd) Difference of pressure between two pointse) Flow
6. Differential manometer is used to measurea) Pressure in pipes channels, etc.b) Atmospheric pressurec) Very low pressured) Difference of pressure between two pointse) Velocity in pipes
7. 10 m of water column is equal toa) 10 kN/m2
b) 1 kN/m2
c) 100 kN/m2
d) 0.1 kN/m2
e) None of the above
Pressure and Pressure Measuring Devices 73
8. Determine the pressure in bar at a depth of 10 m in oil of relative density 0.750.a) 735575b) 0.075c) 735575 × 105
d) 73.575e) 98100
9. What depth of oil (in m), relative density 0.75, will give a gage pressure of 275000 Pa? a) 37.38
b) 367c) 0.027d) 20.2 × 104
e) 28.0310. Express the pressure head of 15 m of water in meters of oil of relative density 0.75.
a) 110.36b) 11.25c) 11250d) 15.0e) 20.0
Answers
1. d 2. c 3. c 4. b 5. a 6. d7. c 8. b 9. b 10. c
Theory
1. Explain different types of pressures.2. Give the relation between different types of pressures.3. State and prove the Pascal’s law.4. Explain theory behind hydrostatic law.5. Write a detailed note on pressure head.6. Write a detailed note on manometers.7. Explain the differences between Simple and Differential manometers.8. Write the merits and demerits of manometers.
Problems
1. A manometer connected to a pipe indicates a negative gage pressure of 60 mm of mercury.What is the absolute pressure in pipe, if the atmosphere pressure is 101 kPa?
2. Calculate the pressure due to column of 0.4 m of (a) Water (b) Oil of specific gravity 0.9(c) Mercury.
3. A simple manometer (U-Tube) containing mercury is connected to a pipe in which an oil ofspecific gravity 0.8 is flowing. The pressure in the pipe is vacuum. The other end of themanometer is open to atmosphere. Find the vacuum pressure in the pipe, if the difference