Post on 22-Mar-2016
description
Preset Shapes ManualAndrew Buckle (http://www.graphicxtras.com)
Introduction
This is a guide to the use of preset shapes in Corel ® Paint Shop Pro ®. How to install the shapes, how to use them with the various tools in PSP. The designs used in this document are all from graphicxtras.com. All screenshots are with kind permission of Corel Corporation.
Andrew (graphicxtras.com)
fig. Rosette shape from theRosettes shapes pack
fig. Star shape from the stars preset shapes pack
fig. Star shape
Access shapes
zip: Extract files from zip file. You might need to download unzip software (such as PKUnzip or Stuffit Expander) though Vista and XP should be able to unzip a zip file.
Please place the pspShape files in the required installation folder, see the location in the other pages
If on CD, select and then drag the pspShape files to the required location in the preset shapes
fig. Flower design from flowers shapespack. Easy to add a drop shadow to avector design, simply apply with black or a color fill and then re-apply with the required color for the design. Changevia the object menu
fig. Rosette design from the rosettes shapes pack
Shapes installation folder for Paint Shop Pro ® PSP 8 9 X Photo X1 X2
For earlier versions of PSP (8 etc( Please place the pspShape files c:\program files\jasc software inc\Paint Shop Pro 8\presets shapes folder or equivalent Corel folder.
You might prefer to keep some of the shape files in a separate folder and load as required. Once located in the shapes path, the shapes will be loaded into the PSP cache.
The preset shapes folder (for X2 etc) is now located for XP in the [Documents and Settings ] [ My Documents ] [ My PSP files ] (or PSP 8 etc) files and preset shapes
Another possible location is [ corel_11 ] folder (this is the one used by PSP for the shapes in Photo X2)
For Vista: Please go to your user folder and the Documents folder and place the preset shapes in the [ My PSP files ] preset shapes folder.
Please contact me if you cannot locate the folder.
However, a preferable approach to install the pspShape (or JSL) files to the location found in the Paint Shop Pro file > preferences > file loca-tions for shapes (you need to start up PSP to find this location). Place the shapes there. You can also use this to setup an alternative location
fig. This is one possible folder for the installation (please check the file > preferences > file locations section for preset shapes) and place the JSLor PSPshape files in that folder. Likewise, if you have gradients ortubes (psptube)
fig. Place designs in the preset shapes folder (the exact locationdoes vary from version to versionand perhaps with Windows 7, it will all change again!!)
File location preferences
You can always find the current location for the shapes via file > preferences > file locations. You can even set a new location for the shapes. You can also find the locations for the picture tubes, brushes, patterns, gradients etc
fig. Find or set the installation folder for thepreset shapes. (file > preferences > file locations and set the shapes)fig. Flowers design from the
flowers shape set
fig. Flowers design from the flowers shape set, the petals etccan be re-colored etc
Presets shapes - use in Paint Shop Pro ®
Start-up PSP 8, 9, X, Photo X1 Photo X2 and select the Preset shape tool
Select a shape from the dropdown list of shapes in the shapes palette. The shapes thumbnails are fairly small.
Apply the preset shape tool using the current shape to the current document, you will see the shape in outline as you apply the shape
fig. Select the preset shapes tool
fig. View the preset shapes tool options (view menu if not displayed) and selectthe design from the browser - only thosefound in the current preset shapes path(s)will be displayed and available.
fig. Border design from the bordersshapes pack
Single or multiple shapes
You can apply a single shape and then use that in your design or you can use multiple shapes, just re-draw. Or mix shapes as required
Please right click on the shape (in later versions or use the objects > properties command in PSP 8 etc) to select the properties for the shape and set the fill / material and stroke as required
The style may retain the original preset style if the tool options for the shape is checked to ON for the ‘retain style’, otherwise the fill and stroke applied to the created shape is the current fill and stroke set via the materials palette
fig. Change settings for the shapesvia the objects menu
fig. Change stroke width etcfig. Materials palette for the fill and strokes (swatches as well)
Fill / stroke and preset shapes
Change the fill or stroke etc of the current shape via the properties dialog (materials).
The shape can accept many different fills such as gradients and patterns and basic fills. The preset shape can also accept a stroke and a line style and width.
fig. Change color (fill and stroke etc) viaproperties found in the objects menu
fig. Change color, texture, gradient, pattern etc
fig. Border shape from the Borders shapes pack
Modify preset shapes
The shapes can also be transformed (object selec-tion tool) such as deforming the shape or applying perspective or rotating the shape
The object selection tool has a number of options such as ‘center on canvas’, ‘make the same size’ etc commands.
fig. The shape can be rotated, scaledetc via the object selection tool
fig. The shape can be applied with perspective or sheared etc.
fig. Easter egg preset shape from theEaster Eggs pack
Pen tool and shapes
The shape can be modified on a point by point basis (pen tool) You can create 1000s and 1000s of unique shape designs from a single starting point
Or even take chunks out of the path by setting the tool to the cut option as well as adding to the path etc. Check out the pen tool options for many different settings.
fig. Use the pen tool to manipulate thevector design at a point to point level
fig. Change the basic shape in 1000s ofways, create a vast range of new shapes from a single design
fig. The tool options for the pen tool is large: you can set to edit mode, draw mode, knife mode and much more. Add to the shape and change in many ways via the pen tool
fig. Knife tool to cut the path design
Rasterization of shapes
The shapes are resolution free (though the mate-rials are not) and you might like to apply various effects or modify the color of the shape
By unchecking the preset shapes option to ‘create as vector’ the design is created as a rasterized design, effects etc can be applied (such as blurs, etc)
Alternatively, leave the design as a vector and then when applying any effect such as a blur, a dialog will appear and asks whether or not you want to convert the layer to a raster layer. Click OK.
Or you can convert the layer to a raster layer via the layers menu > convert to raster layer
fig. To create as a raster shape in the firstplace, simply de-select the create asvector command in the preset shapes tooltool options
fig. When you apply an effect or somedestructive option, you will see the following dialog appear asking whether or not you want to rasterize the vectorshape
fig. If you have a vector shape and you just want to turn it into a raster layer go to the layers menuand select ‘convert to raster layer’
Apply effects to the shapes
Once the shape has been rasterized, you can apply blurs / color effects etc to the shapes as well as export it to tubes / brushes etc
fig. Feedback effect applied to the preset shape
Non Exclusive use of shapes
Please note that the shapes (from graphicxtras.com) are all royalty-free, the copy-right still resides with (c) 2006-2009 Abneil Soft-ware Ltd / Andrew Buckle (I created them all using various applications).
Also, the shapes are non-exclusive so numerous people might use the same shape in an image or advertising project or as a background. There are a few restrictions on their use, please check the license details but basically you can use them in a lot of different commercial and hobby projects such as on packaging, in illustrations, web designs and a whole lot more.
EPS
Shapes sets from graphicxtras.com may (or may not depending on the pack) include additional files in EPS format. They are also for royalty-free use. They can be installed in any folder, access them via file > open command
fig. Easter eggs preset shapes from theEaster Eggs shapes packThe designs can have a gradient etc applied viathe object properties ormaterials
Brushes and shapes
Create a shape using the shape tool and then flatten all layers. Use the export command to export preset shape image as a new brush. Note, there is a limitation on the size of the brush stroke. OR use just merge the design with the background and then select the design and then select a brush tool and go to the brush palette and click on the create brush tip from selection
fig. Draw shape and then merge and then select the design and then select thebrush tool and go to the brushes palette and click the create brush tip from selection. OR use the export commandto save as a new brush (file > export > custom brush)
fig. Flamepreset shape
Tubes and shapes
Preset shapes can also be used as a source for picture tubes. Rasterize the preset shape and then use the layer palette / selection and then export the shape as picture tube. Use the picture tube with the picture tubes tool
Another approach is to use the selections menu and the command selection from vector object. Then use the promote selection command. Once you have that, you will see three entries. Remove the shape and the background layers and leave the promoted selection. Go to the export com-mand and export the shape as a picture tube
Apply the picture tube via the picture tubes tool
fig. Flames designs from theflames shapes pack.
Scripts and shapes
Shapes can be used with scripts. Start recording and then apply shapes. Save the recording and re-use at a later time. The script can also be edited.
Access scripts in the scripts-trusted (if you trust them) or scripts-restricted (limited options). Place them in the required folder, depending on level of trust / use
Select script from drop down
Run scripts by clicking the little arrow beside the script name
fig. Scripts currently availableto PSP. Some of the sets come with scripts to generate thumbnails etcPlace the scripts files if requiredin one of the script folders
fig. Flames design from the flames shape pack
Shapes and browser
Use the browser to display the preset shapes designs. Select the folder containing the shapes, the browser will generate thumbnails of all the preset shapes. The shapes can then be printed etc
fig. To browse all the shapes (you can see them via the preset shapestoolbar - though only those that can be found in the shapes path), use the browse command.
fig. You can browse the current preset shapes folder but with the browse command (file > browse) you can also browse other shapesfolders as well as tubes and other PSP tools
Serial numbers for shapes collec-tion / packs
Please store any serial numbers for reference and future updates or replacement CDs etc
Backup of preset shapes
Please make a backup / multiple copies of the shapes to avoid any loss of shapes etc.
Installation issues
If you have problems installing or using this prod-uct, please e-mail our tech support at support@graphicxtras.com
Comments about shapes
If you have any suggestions to how we can improve our products or manual, please let me know
System requirements
Supported: Version for Jasc / Corel ® Paint Shop Pro ® Photo X2 X1 X 9 8 (Windows ™ 98 ME NT XP Vista Windows 7)
Trademarks
Paint Shop Pro and Corel are registered trade-marks of Corel Corporation. We have no connec-tion whatsoever with Corel. Corel product screen shot(s) reprinted with permission from Corel Corporation
Copyright
The shapes were designed by Andrew Buckle, and copyright 2005-2009 Andrew Buckle and Abneil Software ltd (depending on set / collection)
Company contact details
Telephone UK 01622 688 375Web site: http://www.graphicxtras.come-mail: support@graphicxtras.com
fig. Hearts designs from the hearts preset shapes pack
Selection based on preset shape
You can create a selection (for effects, fills etc) via the selections > from vector object menu command.
fig. If you want to use the shape as a source for a selection, then select the vector shape and then go to the selectionsmenu and select ‘from vector object’
fig. The path now has a selection(marching ants)
Save as WMF (vector) / EMF
The vector design can be saved as a vector (as a preset shape if required via the export command) as WMF format. The option for the WMF save allows for the vector information and bitmap information to be saved.
The vector shape can also be saved as EMF format, generally resulting in a much better vector design than WMF
fig. To save the selected vector designas a vector shape (not a preset shape)for use in other applications, select thefile > save and then select WMF or EMF (and perhaps others)
fig. Set options for the save, you need to save the vector information(though sadly there is no option for just the vector information)
Additional examples of shapes
The following shapes are examples from the shapes packs found on graphicxtras.com (in the section for tools for Paint Shop Pro).
fig. Embellishmentshapes pack 1
fig. Hearts designs from thehearts shape pack
fig. Hearts can be any color, not just red.
fig. Change the color of the design via the propertiesdialog, set fill and stroke etc
fig. Talk Balloons from the talk balloons preset shapes pack
fig. Cube preset shape from the cubes preset shapes pack
fig. Cube from cubes preset shapes pack
fig. Spiral scroll design from the embellish shape pack 2
fig. Embellishmentpreset shape from theembellish shapes pack 2
fig. Embellish shape from the Embellish shapes pack 3
fig. Floral shape from embellish shape pack 4
fig. Art nouveau shapefrom the embellish shape pack 5
fig. Embellish shape frame design from embellish shapes pack 5