Post on 15-Dec-2015
description
>
Eltek Valere Standard Product Offering
Slide 2 18.04.2023
POWER ELECTRONICS IN FOUR BUSINESS AREAS
Energy solutions for telecom infrastructure
Energy solutions for utilities, power transmission & distribution, rail, marine, offshore and other demanding industries
Charging solutions for electrical vehicles
Solar plant-to-grid solutions
RENEWABLEE-MOBILITYINDUSTRIALTELECOM
Slide 3 18/04/2023
Syst
em
ou
tpu
t p
ow
er
MicropackUp to 1kW
Minipack 1U
Up to 1.6kW
Minipack 2U
Up to 4.8kW
Flatpack2 Integrated 2U
Up to 8kW
Flatpack2 Cabinetized
Up to 280kW
Powerpack 5.8kW & ScalableUp to 1MW
Flatpack2 Integrated 5-8U
Up to 24kW
TELECOM
DC Power Systems from 1kW to 1MW
Slide 4 18/04/2023
Con
trol sy
stem
com
ple
xit
y
Compack
Smartpack
Smartpack2
TELECOM
Control and monitoring
Slide 5 18/04/2023
Ordering process – CTO (Configure To Order)
Standard Building Blocks
Configurator Systems ready for delivery
Slide 6 18/04/2023
Controller overviewController overview – common features
Applications Medium to large and
less featured hybrid systems
1U and larger single or multiple shelf systems
Minipack, Flatpack2 and Powerpack systems
Applications Medium to large and
hybrid systems
4U and larger systems, single or multiple cabinet systems
Wallbox
Flatpack2 and Powerpack Systems
Compack “All-in-one” plug-in controller
Ethernet user connection (local or remote)
3 configurable inputs (digital, analog and temperature)
3 potential relay outputs
2 LVD control
Supports CAN control nodes (CAN power device required)
Smartpack “All-in-one” controller
USB user connection (Ethernet optional)
2x16 char. LCD display
6+6 I/O
Distributed architecture
2 LVD control
Expandable functionality with CAN nodes
Smartpack2 Fully distributed architecture
Ethernet user connection (local and remote)
SD card reader for logs and setup
Large graphical large display, panel or door mount (2U)
Simple menu/icon based operation
6+6 I/O as default (can be swapped with 6+6 I/O + fan control for outdoor applications)
3 LVD control
Expandable functionality with CAN nodesSmartpack2
Smartpack
Compack
Applications Small 1U and 2U single
shelf systems
Wallbox
Micropack and Minipack systems
Battery monitoring and control Temperature Compensated Charging, adjustable settings
Periodic/Manual/Automatic test, State-of-health (SOH)
Capacity used/remaining, Depth-of-Discharge/State-of-Charge (DOD/SOC)
Periodic/Manual/Automatic boost/equalize charging
Ethernet RJ45 port for local or remote connections
WebPower – site setup, see status and download logs through your browser
SNMP GET/SET/TRAP commands – NMS support
Alarms to email
Advanced control
Efficiency Management - Prioritize HE rectifiers and solar energy
Temperature Control FAN/AIRCON
LOAD Capacity Warning
Event/alarm/energy/battery logs
Controller overview – CAN nodes
CAN I/O Monitors
Outdoor (Type 1)Outdoor with fan monitoring and control
6 configurable inputs (0-75V)
6 configurable outputs (relay cap. 60W/300W)
2 temperature sensors
2 fan speed inputs
2 fan speed control outputs
Type 2Size optimized model to extend controller inputs and outputs
8 configurable inputs (0-75V)
6 configurable outputs (relay cap. 60W)
Type 3Outdoor with improved tank level measurement accuracy
6 configurable inputs (0-75V/0-10V/0-20mA)
6 configurable outputs (relay cap. 60W/300W)
2 temperature sensors
2 fan speed inputs
2 fan speed control outputs
CAN Monitors
Battery Monitor 4 voltage inputs for
symmetry/midpoint
Embedded temperature measurements
1 fuse fail sense input
1 current shunt input
Load Monitor 8 configurable inputs
for fuse fail sense
8 current shunt inputs
AC Monitor 3 AC Voltage inputs
3 AC Current inputs (external sensor)
5 configurable inputs
Energy consumption log
Smartnode Protocol conversion
(MODBUS and various proprietary protocols)
SMS through GSM modem
Callback through modem
Delivers 500mA power to the CAN bus
Needed for isolation between systems with different references
CAN Power
Slide 7 18/04/2023
DC Power Systems – Key features
Micropack Systems Up to 1000W
Convection cooled
DIN rail mounted
Configured on site
Stand alone or complete system with battery and load distribution
Minipack1U up to 1,6kW2U up to 4,8kW
Flatpack22U/8kW
6U/8-24kW
Flatpack248-280kW
Scalable10-1000kW
MicropackUp to 1kW
Powerpack 5.854-550kW
Minipack Systems 1U height up to 1600W
2U height up to 4800W
Bulk feed or
Complete system with battery and load distribution
Flatpack2 Integrated Systems 4U height distribution
1-3 Racks with FP2 Rectifiers
8-24kW capacity
Smartpack2 distributed control system
Build with common building blocks – easily configured in CTO.
Flatpack2 Cabinetized Systems Up to 96 Flatpack2 rectifiers
Up to 280kW capacity
Smartpack or Smartpack2 control system
Default with IFC type cabinet, optional with FPC.
Powerpack 5.8kW Systems Based on Powerpack 5.8kW modules
Up to 550kW capacity
Smartpack or Smartpack2 control system
Default with IFC type cabinet, optional with FPC.
Scalable Systems Based on Powerpack 11kW modules
Up to 15 rectifiers in each cabinet
Up to 1MW capacity
XC21000 control system
Applications (Small Systems)
Broadband repeaters and multiplexers
LTE, WiMax sites
Applications (Medium Systems)
Base stations
Small data centers
Applications (Large Systems)
Central telecommunication offices
Data centers
DC Power Systems – Key applications
Slide 8 18/04/2023
Hybrid DC Power Systems
Fuel tank
Smartpack
Load
Gen set
Solar
Batteries
CAN bus
I/O Unit
~Mains
BatteryMonitoring
Remote Monitoring
Solar
EV Solar chargers
Flatpack2 Solar chargers Galvanic isolation between panels and
telecom equipment improves immunity to lightning transients
Solar energy prioritized when available Maximum Power Point Tracking (MPPT)
function to utilize close to 100% of available solar power.
HE technology (96% efficiency) 48V and 24V Same modular philosophy as for rectifiers
EV hybrid Overview:
Solutions Autonomous - 100% Solar energy Solar Hybrid - Solar + gen set + grid Hybrid: Gen set + grid Solar ready – Prepared for solar energy
conversion
Control and monitoring – Smartpack2 Smart gen set control – 50% reduced diesel
consumption Remote monitoring – WEB, SNMP, Mail Energy source accounts monitoring green
energy
Slide 9 18/04/2023
Vision
THE GREATEST POWER IN THE INDUSTRY