Post on 02-Mar-2021
PQMH2NPN/NPN resistor-equipped transistors;R1 = 47 kΩ, R2 = 47 kΩ4 November 2015 Product data sheet
1. General descriptionNPN/NPN Resistor-Equipped Transistors (RET) in a leadless ultra small DFN1010B-6(SOT1216) Surface-Mounted Device (SMD) plastic package.
NPN/PNP complement: PQMD12.
2. Features and benefits• 100 mA output current capability• Built-in bias resistors• Simplifies circuit design• Low package height of 0.37 mm• Reduces component count• Reduces pick and place costs• AEC-Q101 qualified
3. Applications• Low current peripheral driver• Control of IC inputs• Replaces general-purpose transistors in digital applications• Mobile applications
4. Quick reference dataTable 1. Quick reference dataSymbol Parameter Conditions Min Typ Max Unit
Per transistor
VCEO collector-emittervoltage
open base - - 50 V
IO output current - - 100 mA
Per transistor
R1 bias resistor 1 [1] 33 47 61 kΩ
R2/R1 bias resistor ratio
Tamb = 25 °C
[1] 0.8 1 1.2
[1] See section "Test information" for resistor calculation and test conditions.
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 2 / 14
5. Pinning informationTable 2. Pinning informationPin Symbol Description Simplified outline Graphic symbol
1 GND1 GND (emitter) TR1
2 I1 input ( base) TR1
3 O2 output (collector) TR2
4 GND2 GND (emitter) TR2
5 I2 input ( base) TR2
6 O1 output (collector) TR1
7 O1 output (collector) TR1
8 O2 output (collector) TR2
Transparent top view
1 67
8
2
3
5
4
DFN1010B-6 (SOT1216)
O1 I2 GND2
GND1 I1 O2
R2
TR1TR2
R1
R2 R1
aaa-019894
6. Ordering informationTable 3. Ordering information
PackageType number
Name Description Version
PQMH2 DFN1010B-6 DFN1010B-6: plastic thermal enhanced ultra thin smalloutline package; no leads; 6 terminals
SOT1216
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 3 / 14
7. MarkingTable 4. Marking codesType number Marking code
PQMH2 A 010
MARKING CODE(EXAMPLE)
PIN 1 INDICATION MARK
YEAR DATE CODE
READING DIRECTION
READING EXAMPLE:
A 110
aaa-019766
MARK-FREE AREA
VENDOR CODE
Fig. 1. DFN1010B-6 (SOT1216) binary marking code description
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 4 / 14
8. Limiting valuesTable 5. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter Conditions Min Max Unit
Per transistor
VCBO collector-base voltage open emitter - 50 V
VCEO collector-emitter voltage open base - 50 V
VEBO emitter-base voltage open collector - 10 V
positive - 40 VVI input voltage
negative - -10 V
IO output current - 100 mA
ICM peak collector current tp ≤ 1 ms; singel pulse - 100 mA
Ptot total power dissipation Tamb ≤ 25 °C [1] - 230 mW
Per device
Ptot total power dissipation Tamb ≤ 25 °C [1] - 350 mW
Tj junction temperature - 150 °C
Tamb ambient temperature -55 150 °C
Tstg storage temperature -65 150 °C
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standardfootprint.
Tamb (°C)-75 17512525 75-25
aaa-007377
200
100
300
400
Ptot(mW)
0
FR4 PCB, standard footprint
Fig. 2. Per device: Power derating curve
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 5 / 14
9. Thermal characteristicsTable 6. Thermal characteristicsSymbol Parameter Conditions Min Typ Max Unit
Per transistor
Rth(j-a) thermal resistancefrom junction toambient
in free air [1] - - 543 K/W
Per device
Rth(j-a) thermal resistancefrom junction toambient
in free air [1] - - 357 K/W
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
aaa-007378
10-5 1010-210-4 10210-1tp (s)
10-3 1031
102
10
103
Zth(j-a)(K/W)
1
duty cycle =1
0.750.5
0.330.2
0.1
0.02 0.01
0
0.05
FR4 PCB, standard footprint
Fig. 3. Per transistor: Transient thermal impedance from junction to ambient as a function of pulse duration;typical values
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 6 / 14
10. CharacteristicsTable 7. CharacteristicsSymbol Parameter Conditions Min Typ Max Unit
Per transistor
ICBO collector-base cut-offcurrent (emitter open)
VCB = 50 V; IE = 0 A; Tamb = 25 °C - - 100 nA
VCE = 30 V; IB = 0 A; Tamb = 25 °C - - 1 µAICEO collector-emitter cut-offcurrent (base open) VCE = 30 V; IB = 0 A; Tamb = 150 °C - - 5 µA
IEBO emitter-base cut-offcurrent (collector open)
VEB = 5 V; IC = 0 A; Tamb = 25 °C - - 90 µA
hFE DC current gain VCE = 5 V; IC = 5 mA; Tamb = 25 °C 80 - -
VCEsat collector-emittersaturation voltage
IC = 10 mA; IB = 0.5 mA; Tamb = 25 °C - - 150 mV
VI(off) off-state input voltage VCE = 5 V; IC = 100 µA; Tamb = 25 °C - 1.2 0.8 V
VI(on) on-state input voltage VCE = 0.3 V; IC = 2 mA; Tamb = 25 °C 3 1.6 - V
R1 bias resistor 1 [1] 33 47 61 kΩ
R2/R1 bias resistor ratio
Tamb = 25 °C
[1] 0.8 1 1.2
CC collector capacitance VCB = 10 V; IE = 0 A; f = 1 MHz;Tamb = 25 °C
- - 2.5 pF
fT transition frequency VCE = 5 V; IC = 10 mA; f = 100 MHz;Tamb = 25 °C
[2] - 230 - MHz
[1] See section "Test information" for resistor calculation and test conditions.[2] Characteristics of built-in transistor
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 7 / 14
IC (mA)10-1 102101
006aac752
102
10
103
hFE
1
(1)(2)
(3)
VCE = 5 V(1) Tamb = 100 °C(2) Tamb = 25 °C(3) Tamb = -40 °C
Fig. 4. DC current gain as a function of collectorcurrent; typical values
VCE (V)0 542 31
aaa-018667
0.04
0.06
0.02
0.08
0.1IC(A)
0
IB = 0.06 mA
0.12 mA
0.18 mA
0.24 mA
0.30 mA
0.36 mA
0.60 mA
0.42 mA0.48 mA0.54 mA
Tamb = 25 °C
Fig. 5. Collector current as a function of collector-emitter voltage; typical values
aaa-018666
IC (mA)10-1 102101
10-1
1
VCEsat(V)
10-2
(1)
(3)(2)
IC/IB = 20(1) Tamb = 100 °C(2) Tamb = 25 °C(3) Tamb = -40 °C
Fig. 6. Collector-emitter saturation voltage as afunction of collector current; typical values
006aac754
IC (mA)10-1 102101
1
10
VI(on)(V)
10-1
(1)
(2)
(3)
VCE = 0.3 V(1) Tamb = -40 °C(2) Tamb = 25 °C(3) Tamb = 100 °C
Fig. 7. On-state input voltage as a function of collectorcurrent; typical values
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 8 / 14
IC (mA)10-1 101
006aac755
1
10
VI(off)(V)
10-1
(1)
(2)(3)
VCE = 5 V(1) Tamb = -40 °C(2) Tamb = 25 °C(3) Tamb = 100 °C
Fig. 8. Off-state input voltage as a function of collectorcurrent; typical values
VCB (V)0 504020 3010
006aac756
0.8
1.2
0.4
1.6
2.0Cc
(pF)
0.0
f = 1 MHz; Tamb = 25 °C
Fig. 9. Collector capacitance as a function of collector-base voltage; typical values
006aac757
IC (mA)10-1 102101
102
103
fT(MHz)
10
VCE = 5 V; Tamb = 25 °C
Fig. 10. Transition frequency as a function of collector current; typical values of built-in transistor
11. Test information
11.1 Quality informationThis product has been qualified in accordance with the Automotive Electronics Council(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and issuitable for use in automotive applications.
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 9 / 14
11.2 Resistor calculation• Calculation of bias resistor 1 (R1)
• Calculation of bias resistor ratio (R2/R1)
R1
R2
GND
II1; II2
n.c.
II3; II4
aaa-020082
Fig. 11. Per transistor: Resistor test circuit
11.3 Resistor test conditionsTable 8. Resistor test conditions
Test conditionsR1 (kΩ) R2 (kΩ)
II1 II2 II3 II4
47 47 55 μA 105 μA -55 μA -105 μA
12. Package outline
5
32
13-03-05Dimensions in mm
0.340.40
0.04max
0.951.05
0.220.30
0.1250.205
1.051.15
0.275 0.275
0.320.40
0.35 0.35
1
6 4
0.150.23
Fig. 12. Package outline DFN1010B-6 (SOT1216)
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 10 / 14
13. Soldering
SOT1216Footprint information for reflow soldering of DFN1010B-6 package
sot1216_fr
solder land
solder resist
solder land plus solder paste
occupied area
Dimensions in mm
Issue date 13-03-0614-07-28
0.3 (6x)
1.10.6
0.250.35
0.35
0.51.21.3
0.25
1
1.35
0.35
0.15 0.150.2 (6x)
0.35
0.9
Fig. 13. Reflow soldering footprint for DFN1010B-6 (SOT1216)
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 11 / 14
14. Revision historyTable 9. Revision historyData sheet ID Release date Data sheet status Change notice Supersedes
PQMH2 v.1 20151104 Product data sheet - -
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 12 / 14
15. Legal information
15.1 Data sheet statusDocumentstatus [1][2]
Productstatus [3]
Definition
Objective[short] datasheet
Development This document contains data fromthe objective specification for productdevelopment.
Preliminary[short] datasheet
Qualification This document contains data from thepreliminary specification.
Product[short] datasheet
Production This document contains the productspecification.
[1] Please consult the most recently issued document before initiating orcompleting a design.
[2] The term 'short data sheet' is explained in section "Definitions".[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case ofmultiple devices. The latest product status information is available onthe Internet at URL http://www.nexperia.com.
15.2 DefinitionsPreview — The document is a preview version only. The document is stillsubject to formal approval, which may result in modifications or additions.Nexperia does not give any representations or warranties as tothe accuracy or completeness of information included herein and shall haveno liability for the consequences of use of such information.
Draft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. Nexperia does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequencesof use of such information.
Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet isintended for quick reference only and should not be relied upon to containdetailed and full information. For detailed and full information see therelevant full data sheet, which is available on request via the local Nexperiasales office. In case of any inconsistency or conflict with theshort data sheet, the full data sheet shall prevail.
Product specification — The information and data provided in a Productdata sheet shall define the specification of the product as agreed betweenNexperia and its customer, unless Nexperia andcustomer have explicitly agreed otherwise in writing. In no event however,shall an agreement be valid in which the Nexperia productis deemed to offer functions and qualities beyond those described in theProduct data sheet.
15.3 DisclaimersLimited warranty and liability — Information in this document is believedto be accurate and reliable. However, Nexperia does not giveany representations or warranties, expressed or implied, as to the accuracyor completeness of such information and shall have no liability for theconsequences of use of such information. Nexperia takes noresponsibility for the content in this document if provided by an informationsource outside of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental,punitive, special or consequential damages (including - without limitation -lost profits, lost savings, business interruption, costs related to the removalor replacement of any products or rework charges) whether or not suchdamages are based on tort (including negligence), warranty, breach ofcontract or any other legal theory.
Notwithstanding any damages that customer might incur for any reasonwhatsoever, Nexperia’s aggregate and cumulative liability towardscustomer for the products described herein shall be limited in accordancewith the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right tomake changes to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.
Suitability for use in automotive applications — This Nexperiaproduct has been qualified for use in automotiveapplications. Unless otherwise agreed in writing, the product is not designed,authorized or warranted to be suitable for use in life support, life-critical orsafety-critical systems or equipment, nor in applications where failure ormalfunction of a Nexperia product can reasonably be expectedto result in personal injury, death or severe property or environmentaldamage. Nexperia and its suppliers accept no liability forinclusion and/or use of Nexperia products in such equipment orapplications and therefore such inclusion and/or use is at the customer's ownrisk.
Quick reference data — The Quick reference data is an extract of theproduct data given in the Limiting values and Characteristics sections of thisdocument, and as such is not complete, exhaustive or legally binding.
Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. Nexperia makes norepresentation or warranty that such applications will be suitable for thespecified use without further testing or modification.
Customers are responsible for the design and operation of theirapplications and products using Nexperia products, and Nexperiaaccepts no liability for any assistance with applications orcustomer product design. It is customer’s sole responsibility to determinewhether the Nexperia product is suitable and fit for thecustomer’s applications and products planned, as well as for the plannedapplication and use of customer’s third party customer(s). Customers shouldprovide appropriate design and operating safeguards to minimize the risksassociated with their applications and products.
Nexperia does not accept any liability related to any default,damage, costs or problem which is based on any weakness or defaultin the customer’s applications or products, or the application or use bycustomer’s third party customer(s). Customer is responsible for doing allnecessary testing for the customer’s applications and products using Nexperiaproducts in order to avoid a default of the applicationsand the products or of the application or use by customer’s third partycustomer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) will cause permanentdamage to the device. Limiting values are stress ratings only and (proper)operation of the device at these or any other conditions above thosegiven in the Recommended operating conditions section (if present) or theCharacteristics sections of this document is not warranted. Constant orrepeated exposure to limiting values will permanently and irreversibly affectthe quality and reliability of the device.
Terms and conditions of commercial sale — Nexperiaproducts are sold subject to the general terms and conditions of commercialsale, as published at http://www.nexperia.com/profile/terms, unless otherwiseagreed in a valid written individual agreement. In case an individualagreement is concluded only the terms and conditions of the respectiveagreement shall apply. Nexperia hereby expressly objects toapplying the customer’s general terms and conditions with regard to thepurchase of Nexperia products by customer.
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 13 / 14
No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or thegrant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.
Export control — This document as well as the item(s) described hereinmay be subject to export control regulations. Export might require a priorauthorization from competent authorities.
Translations — A non-English (translated) version of a document is forreference only. The English version shall prevail in case of any discrepancybetween the translated and English versions.
15.4 TrademarksNotice: All referenced brands, product names, service names andtrademarks are the property of their respective owners.
© Nexperia B.V. 2017. All rights reserved
Nexperia PQMH2NPN/NPN resistor-equipped transistors; R1 = 47 kΩ, R2 = 47 kΩ
PQMH2 All information provided in this document is subject to legal disclaimers.
Product data sheet 4 November 2015 14 / 14
16. Contents1 General description ............................................... 12 Features and benefits ............................................13 Applications ........................................................... 14 Quick reference data ............................................. 15 Pinning information ...............................................26 Ordering information .............................................27 Marking ................................................................... 38 Limiting values .......................................................49 Thermal characteristics .........................................510 Characteristics .......................................................611 Test information ..................................................... 811.1 Quality information ............................................... 811.2 Resistor calculation .............................................. 911.3 Resistor test conditions ........................................ 912 Package outline ..................................................... 913 Soldering .............................................................. 1014 Revision history ...................................................1115 Legal information .................................................1215.1 Data sheet status ............................................... 1215.2 Definitions ...........................................................1215.3 Disclaimers .........................................................1215.4 Trademarks ........................................................ 13
© Nexperia B.V. 2017. All rights reservedFor more information, please visit: http://www.nexperia.comFor sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 04 November 2015