TWILIGHT GEMS TWILIGHT GEMS MANUFACTURING PRIVATE MANUFACTURING PRIVATE

LIMITED.LIMITED.

ANKUR CHHAJERPGDM - 09MARKETING

ABOUT TWILIGHT GEMSABOUT TWILIGHT GEMS

It is firm which basically deals in manufacturing of gems It is firm which basically deals in manufacturing of gems and jewellery. It is a firm which supplies their products and jewellery. It is a firm which supplies their products only in domestic markets.only in domestic markets.

Twilight Gems having their own diamond office in opera Twilight Gems having their own diamond office in opera house (panchratana building) named as GANGAR house (panchratana building) named as GANGAR GEMS.GEMS.

Client directly visit to the office which is in Sakinaka Client directly visit to the office which is in Sakinaka (Andheri) and gives order their only by seeing the (Andheri) and gives order their only by seeing the design and if they want some new product which is not design and if they want some new product which is not exciting in market they give the new design.exciting in market they give the new design.

Twilight also takes a single product order but the cost of Twilight also takes a single product order but the cost of labour is high as compare in bulk order.labour is high as compare in bulk order.

““Getting knowledge of products as well Getting knowledge of products as well as production process of jewellery”as production process of jewellery”

PRODUCTION PROCESSPRODUCTION PROCESS Designing department.Designing department. Model department.Model department. Wax department & Mould department.Wax department & Mould department. Setting department.Setting department. Wax Setting department.Wax Setting department. Hand Setting department.Hand Setting department. Casting department.Casting department. Filling department.Filling department. Polishing department.Polishing department. Rhodium department & Ultra Sonic department.Rhodium department & Ultra Sonic department.

STAGE 1 : WAX MOULDSSTAGE 1 : WAX MOULDS

1. Measuring the wax to be cut off1. Measuring the wax to be cut off

2. Wax is cut to exact proportions to the finished 2. Wax is cut to exact proportions to the finished ring.ring.

3. Wax is shaped to the design of the ring to 3. Wax is shaped to the design of the ring to be made.be made.

4. Shaping the setting for the gem stone.4. Shaping the setting for the gem stone.

5. The gem stone fits the setting.5. The gem stone fits the setting.

6. Wax was injected into this rubbed to form 6. Wax was injected into this rubbed to form the ring.the ring.

STAGE 2 : PLASTER MOULDSSTAGE 2 : PLASTER MOULDS

7. A removed wax ready to be casted.7. A removed wax ready to be casted.

8. Mixing the plaster for the investment.8. Mixing the plaster for the investment.

STAGE 3 : HEATING PROCESSSTAGE 3 : HEATING PROCESS

9. Removing air from the investment before it 9. Removing air from the investment before it goes to the oven.goes to the oven.

10. Here the investment stays in the oven 10. Here the investment stays in the oven over night.over night.

11. Alloy mix for yellow gold.11. Alloy mix for yellow gold.

12. The gold and the alloy are heated up to be 12. The gold and the alloy are heated up to be casted.casted.

13. A tree of rings ready to be cut apart.13. A tree of rings ready to be cut apart.

STAGE 4 : REFIREMENTSTAGE 4 : REFIREMENT

14. Freshly casted rings.14. Freshly casted rings.

15. Lapping the shank of a new ring.15. Lapping the shank of a new ring.

16. Sanding burns off an extra ring.16. Sanding burns off an extra ring.

17. Soldering white gold onto a yellow gold 17. Soldering white gold onto a yellow gold ring.ring.

18. The hands of an artist shaping the 18. The hands of an artist shaping the finished gold.finished gold.

STAGE 5 : CLEANINGSTAGE 5 : CLEANING

19. Rhodium platting on ring.19. Rhodium platting on ring.

20. The finished product as per the client’s 20. The finished product as per the client’s requirement.requirement.

THANK YOUTHANK YOU