PPG Italia Sales & Services S.r.l. - via De Gasperi 17-1920020 Lainate - Milano - ITALY - www.maxmeyer.comTel . (+39) 02.93.17.921 - Fax (+39) 02.93.17.92.51

One of the main expectations of abodyshop manager is to have a faster

process cycle that preserves the high quality levelof the repair. To meet this requirement, MaxMeyer

launched the HP Line several years ago.

Today HP SYSTEM becomes compliant and providesmore products specifically designed to obtain the best

performance in every phase of the paint process.

Simple, effective and productive.

HP Clearcoat.

Air-dry capability.

1 visit application.

Easy to polish.

HP Clear UHS 0950 is a new 2K Ultra High Solids Clearcoat that combines fast dryingtimes with strong film hardness. Suitable foruse on spot-repairs and full panels, HP ClearUHS 0950 has an excellent final appearancewhen applied over AquaMax basecoat.

15 min

Air drying ONLY 12 HOURS

HP Multigrey Filler.

Good filling capabilities.

Easy to sand.

Faster drying times compared toconventional primers.

8700 and 8900 are 2K ultra rapid-drying Multigrey Fillers which significantly increase productivity in the bodyshop. By mixing thelight grey version (8700) with the dark grey version (8900) together in the correct ratio toachieve the correct shade of grey the opacity oftopcoats can be optimised.

HP Wet on Wet Primer.

Topcoat can be applied after 20minutes air-dry.

Multigrey capability

Robust application properties

M1(100/0)

M2(70/30)

M3(50/50)

M4(30/70)

M5(0/100)

Both the sand and the wet on wet primers are available as Multigrey Systems. An undercoat with

the proper shade of grey facilitates colour matching and reduces the number of visits

necessary to reach opacity; this is agenerally accepted fact.

MaxMeyer Multigrey Systemoffers 5 shades of grey

developed to performwith any topcoat

colour.

1 h

Specific forSANDING

Specific forWET ON WET

8001 and 8006 are new additions to the HPrange. These Multigrey Wet on Wet Primers combine fast process times with an excellentfinal finish. Developed for use under AquaMaxand UHS Duralit Extra, they provide good adhesion over a wide variety of substrates.

3:40 h

HP Aerosol Primer

Fast process time. Can be re-coatablewith all topcoats after 15 minutes.

No wastage. Only the necessaryamount of product for the repair isused.

HP Aerosol Primer is ideal for rub-throughsprior to the application of colour and for smallrepairs. Thanks to the aerosol package the product is ready for use, minimising the timewasted on the mixing of product and the cleaningof equipment during the painting process.

An average application of HP Aerosol Primer iscompleted in less than 60 seconds.

EASY AND FASTapplication

20 min