Post on 25-Mar-2018
APPROVED F
OR POTA
BLE W
ATER
PP-RCTPiping Systems
THE
COM
PAN
Y
BUSTO ARSIZIO - VA (IT)
SHANGHAI (RPC)
HOUSTON-TX (USA)
SOUTH CAROLINA-SC (USA)
CASTEL GUELFO - BO (IT)
BRISBANE-QLD (AUS)
REGISTERED OFFICESHANGHAI GECO SYSTEM CO.
NUPI AMERICAS INC.
NUPI AMERICAS INC.
PRODUCTION &OPERATIONS CENTRE
NUPI SALES OFFICE
NUPI AMERICAS Inc. was founded in 2001 and is based in Houston, TX where it
established a warehouse and production facility. Another warehouse is located
in Early Branch, SC.
NUPI AMERICAS has its roots in NUPI Industrie Italiane S.p.A., born in
2015 to replace NUPIGECO S.p.A. that was founded in 2008 by the merger
of NUPI S.p.A. and GECO System S.p.A. – two companies with more than 40
years of experience in the field.
NUPI Industrie Italiane S.p.A. and NUPI AMERICAS together develop and
manufacture piping systems for use in industrial, sanitary (plumbing), HVAC,
chemical and petrochemical applications, waterworks, gas and irrigation markets.
Relying on experience and constant growth, our companies have proven to be
cutting edge manufacturers, ready to meet the needs of the market while also
protecting the environment.
Our trademarked systems are real system solutions, covering a wide range
of applications, reducing costs, avoiding waste and increasing productivity.
Thanks to their quality, these products have passed many different tests and
have obtained the most prestigious certificates and listings, in line with the
regulations of the five continents for the construction of water and gas
networks and systems for the transport of fuels.
Producing better quality and being cost effective is the goal, which is made
easier everyday by new technology. Our companies are continuously investing
in research and development programs, while strengthening our production
systems, operated by a sophisticated technology that guarantees the highest
quality of products.
Our facilities use modern, state-of-the-art computer controlled production
equipment and methods that guarantee products of the highest quality together
with continuous quality control systems.
On these solid foundations NUPI Industrie Italiane S.p.A. and NUPI AMERICAS
demonstrate leadership throughout the thermoplastic piping industry. Our
customers can rely on the best quality materials and precise manufacture,
obtained through completely automated production systems resulting in timely
deliveries.
Customer satisfaction is pursued through high quality products and the
constant attention to our customers’ needs and requirements and by means of
an effective team of people in post-sales service, effective and precise technical
assistance and intensive training of installers.
SHANGHAI (RPC)
SHANGHAI GECO SYSTEM CO.
The NIRON brand identifies a Random Copolymer Polypropylene (PP-RCT) pipe and fitting system produced by Nupi Americas, manufactured to ASTM F2389 and CSA B137.11 standards.
NIRON is a piping system used for all kinds of water applications including hot and cold potable water applications, hydronic heating applications, and both chilled water and cooling tower circulation pipes. The system can be used for large multi-family residential buildings, hotels, hospitals, malls, churches, schools, gymnasiums, cruise liners and merchant ships. The NIRON system is also used in industrial installations for the conveyance of compressed air and several commonly used chemical substances.
ADVANCED PP-RCT MATERIAL NIRON is manufactured from 100% Beta PP-RCT material, a highly crystalline form of PPR which allows for up to twice the pressure rating at higher temperatures and superior chlorine resistance.
ABSOLUTE RELIABILITY Produced since 1982, the NIRON system has been sold in all 5 continents. Over 150,000 miles of pipes and fittings have been shipped with complete customer and installer satisfaction.
CERTIFIED QUALITY The NIRON system obtained the most prestigious international
quality certificates but to us quality stands for complete customer satisfaction. This is obtained exclusively through the supply of products having features that completely fulfil the application requirements.
COMPLETE RANGE NIRON pipes and fittings - from 1/2 to 24 inches - are available
in a wide range of fittings and joining methods to solve any installation problem.
LOW THERMAL EXPANSION
This is obtained thanks to the new composite piping NIRON FG and NIRON CLIMA produced with an innovative coextrusion technology.
Their inner layer is made of PP copolymer reinforced with fiberglass to reduce the linear thermal expansion up to 73%.
SPEED OF INSTALLATIONUnquestionably the biggest advantage of NIRON lies in the speed of installation.
Due to easy joining methods, time of installation can be reduced by 30 to 50%.
THE PRODUCT
* NIRON, grey pigmented PP piping with red outer coating and longitudinal grey stripes, and grey pigmented PP piping with blue outer coating and longitudinal grey stripes are trademarks of Nupi Americas Inc., a subsidiary of Nupi Industrie Italiane S.p.A.
NO CORROSION OR SCALING Polypropylene is a poor conductor of electricity, so the
NIRON system is cannot be affected by corrosion. Furthermore, thanks to its smooth inner surface, any type of lime incrustation is avoided.
ENERGY SAVING The low thermal conductivity of polypropylene
allows for considerable energy savings compared to metallic materials, and reduces insulation cost.
LOW NOISE INSTALLATION The noise absorption properties and elasticity of
this material soften noise and vibrations caused by the water flow and the water hammer effect.
RESISTANCE TO EXTREME TEMPERATURES AND THERMAL EXPANSION
The NIRON system is tested to resist temperatures up to boiling water and freezing conditions. NIRON FG piping allows thermal expansion to be reduced to levels similar to copper piping.
ABRASION RESISTANCE The high resistance of NIRON pipes eliminates erosion problems and allows high speed water flow.
NO TOXICITY The NIRON system is absolutely non-toxic and complies with national and international health
standards.
30 YEAR WARRANTY The NIRON system is covered by third party liability insurance in accordance to EC standards
no. 85/374 and to D.P.R no. 244 dated 24th May 1988 - Italian law.
THE PRODUCT
WIDE RANGE OF JOINING METHODSNIRON offers the widest range of joining options of any PPR product line with five primary joining methods and a complete range of fitting sizes. NIRON can be joined by butt fusion and electrofusion through 24 inch.
SOCKET FUSIONNIRON offers socket fusion for full pressure joining with a full range of fittings in ½ inch through 5 inch sizes. Joints can be made using hand held tools, and in large sizes with bench-style tools for maximum effectiveness.
BUTT FUSIONNIRON offers butt fusion with long spigot fittings starting at 2 inch and through 24 inch. Butt fusion is often a more fabrication friendly technique compared to socket fusion in sizes of 2 inch through 5 inch, and customers can take advantage of this feature of the NIRON system.
ELECTROFUSIONElectrofusion offers a superior and cost effective ability to solve difficult installation challenges. NIRON is the only PPR system available with a full fitting system allowing electrofusion in sizes of ½ through 8 inch. NIRON fittings are manufactured using single wire technology, which means welds are fused simultaneously for every elbow, tee and reducer for highly efficient labor rates. NIRON electrofusion may be performed from 10” through 24” using NIRON couplings.
COMPRESSION NIRON can be joined using a compression method, by the hand tightening of compression nuts of fittings and couplings. A full range of fittings are available in sizes of ½” through 4”. The system is rated to 150 psi at ambient temperatures, and is rated to 90 psi for temperatures of up to 160oF in sizes through 2 inch and to 90 psi for temperature of up to 140oF in sizes of 2½” through 4 inch. NIRON compression fittings and couplings may be disassembled and re-used, which adds versatility. Transition couplings are also available for connection to copper and copper-tube size systems.
SADDLE WELDINGNIRON offers a full variety of saddle fusion fittings that allow small diameter branches to be made into larger pipes without the expense of adding reducing tees. NIRON has saddles available which allow both socket fusion outlets, as well as long spigot outlets (in select sizes). In addition, saddle parts are available with female threaded adapters, as well as male transition parts to allow for a variety of PEX transitions. Custom headers can be created on site, or in the fabrication shop to prefabricate any kind of header combination that is required. Saddle welding offers substantial labor savings in comparison to installations involving copper piping.
NIRON PIPING SYSTEM
NIRON BLUE PP-RCT PIPE
MONOLAYER PP-RCT PIPEBLUE WITH GREY STRIPESFOR COLD WATERSDR 7.3 FROM ½” TO ¾” SDR 9 1” SDR 11 FROM 1¼” TO 6”SDR 17 FROM 2” TO 6”PIPE LENGTH 20 FT
NIRON FG RED PP-RCT PIPE
MULTILAYER PIPEPP-RCT + FIBERGLASSRED WITH GREY STRIPESFOR HOT WATERSDR 7.3 FROM ½” TO 6” SDR 9 FROM 1” TO 6” SDR 11 FROM 1¼” TO 6”PIPE LENGTH 20 FT
NIRON CLIMA PP-RCT PIPE
MULTILAYER CLIMA PIPEPP-RCT + FIBERGLASSGREYSDR 7.3 FROM ½” TO 14” SDR 9 FROM 1” TO 6”SDR 11 FROM 1¼” TO 16”SDR 17 FROM 2” TO 24”PIPE LENGTH 20 FT
NIRON MONO GREY PP-RCT PIPE
MONOLAYER PP-RCT PIPEGREYSDR 7.3 FROM ½” TO ¾”SDR 9 1” SDR 11 FROM 1¼” TO 24”SDR 17 FROM 2” TO 24”PIPE LENGTH 20 FT
NIRON CLIMA 11 DARK
MULTILAYER CLIMA11 DARK PIPE WITH UV RAY BARRIERPP-RCT+FIBERGLASS+HDPE COVERGREY AND BLACK COVERSDR 11 FROM 1” TO 16”SDR 17 FROM 2” TO 16”PIPE LENGTH 20 FT
FITTINGS
LONG RADIUS 90° ELBOWCODE inchesNCLR ½” - ¾”
CROSSOVER PIPECODE inchesNSOR ½” - ¾” - 1”NSOFF ½” - ¾”NSOFM ½” - ¾”
90° ELBOWCODE inchesNG (SOCKET FUSION) from ½” to 5”NG_MM (LONG SPIGOT) from 2” to 24”
FEMALE THREADED 90° ELBOWCODE inchesNGF from ½” x ½”NPT to 2” x 2” NPT
MALE THREADED 90° ELBOWCODE inchesNGM from ½” x ½” NPT
to 1” x 1” NPT
FEMALE THREADED BACK PLATE 90° CODE inchesNTER ½” x ½” NPT
FEMALE THREADED WINGED 90° ELBOWCODE inches
NGTF ½” x ⅜” NPT ½” x ½” NPT
MALE THREADED WINGED 90° ELBOWCODE inches
NGTM ½” x ⅜” NPT ½” x ½” NPT
MOUNTING UNIT WITH 90° ELBOWSCODE inches NGVRF ½” x ½” NPT
TEMPLATE FOR EXTERNAL BATH TAPSCODE inches NGVF ½” x ½” NPT
¾” x ½” NPT
FEMALE THREADED 90° ELBOW FOR TEMPLATECODE inches
NGOF ½” x ⅜” NPT ¾” x ½” NPT
MALE THREADED 90° ELBOW FOR TEMPLATECODE inchesNGOM ½” x ½” NPT
STREET 90° ELBOWCODE inchesNGMF from ½” to 1¼”
FEMALE THREADED STREET 90° ELBOWCODE inchesNGMFF ½” x ½” NPT
45° ELBOWCODE inchesNC45 (SOCKET FUSION)
from ½” to 5”NC45_MM (LONG SPIGOT)
from 2” to 24”
STREET 45° ELBOWCODE inchesNC45MF from ½” to 1”
90° TEECODE inchesNT (SOCKET FUSION)
from ½” to 5”NT_MM (LONG SPIGOT)
from 2” to 24”
FEMALE THREADED TEE W/NPT LEAD FREE BRASSCODE inchesNTF from ½” x ½” NPT
to 1” x 1” NPT
FEMALE THREADED TEE W/NPT STAINLESS STEELCODE inchesNTF_SS from ½” x ½” NPT
to 1” x 1” NPT
MALE THREADED TEE W/NPT LEAD FREE BRASSCODE inchesNTM from ½” x ½” NPT
to 1” x 1” NPT
MALE THREADED TEE W/NPT STAINLESS STEELCODE inchesNTM_SS from ½” x ½” NPT
to 1” x 1” NPT
REDUCING TEE - SOCKET FUSIONCODE inchesNTR from ¾” x ½”
to 5” x 4”
MALE BRANCH REDUCING TEE - LONG SPIGOTCODE inchesNTR_M from 6” x 2”
to 24” x 22”
SOCKET BRANCH FUSION REDUCING TEECODE inchesNTRF from 3” x 1¼”
to 14” x 3”
45° LATERAL WYE - LONG SPIGOTCODE inchesNWYE from 3” x 20”
REDUCED CROSS - SOCKET FUSIONCODE inchesNCR from 1¼” x ½” x ½” x 1¼” to 1¼” x ¾” x ¾” x 1¼”
SLIDE ELBOW THREE OUTLETS - SOCKET FUSIONCODE inchesNCTV ½”
REDUCING BUSHING - SOCKET FUSIONCODE inchesNR from ¾” x ½” to 5”x 4”
MALE CONCENTRIC REDUCER - LONG SPIGOTCODE inches SDR 11 - 17NR_MM (LONG SPIGOT) from 2½” x 1¼” to 8”x 6”NRCC (SHORT SPIGOT) from 10” x 6” to 24”x 22”
COUPLINGCODE inchesNMAN from ½” to 5”
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Tnirrfg_74 pollici - SDR74- Hot Water\NI10168.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OFREV.TNIRRFGNIRON MULTI RED FG PP-RCT PIPE
FOR HOT WATERNI10168
1 2 -1
CODESDRNDS minDiWeight (lbs/ft)27TNIRRFG20737.31/2" => 20 mm0.110.570.1127TNIRRFG25737.33/4" => 25 mm0.140.710.1627TNIRRFG32737.31" => 32 mm0.170.910.2627TNIRRFG40737.31" 1/4 => 40 mm0.221.140.4027TNIRRFG50737.31" 1/2 => 50 mm0.271.430.6127TNIRRFG63737.32" => 63 mm0.341.800.9727TNIRRFG75737.32" 1/2 => 75 mm0.412.141.3827TNIRRFG90737.33" => 90 mm0.482.571.9827TNIRRFG110737.34" => 110 mm0.593.142.9327TNIRRFG125737.35" => 125 mm0.673.573.7727TNIRRFG160737.36" => 160 mm0.864.576.1127TNIRRFG32991" => 32 mm0.140.980.2227TNIRRFG40991" 1/4 => 40 mm0.171.230.3427TNIRRFG50991" 1/2 => 50 mm0.221.530.5227TNIRRFG63992" => 63 mm0.281.930.8427TNIRRFG75992" 1/2 => 75 mm0.332.291.1727TNIRRFG90993" => 90 mm0.392.751.6827TNIRRFG110994" => 110 mm0.483.372.5027TNIRRFG125995" => 125 mm0.553.823.2327TNIRRFG160996" => 160 mm0.724.895.24
S min
ND Di
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nclr pollici\NI10121.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCLR LONG RADIUS 90° ELBOW - SOCKET
FUSION NI10121
1 1 0
ND D
L1
L
H
CODE ND D L1 L H27NCLR20 1/2 => 20 mm 1.10 0.63 2.17 2.1727NCLR25 3/4 => 25 mm 1.34 0.63 2.56 2.56
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ng pollici\NI10125.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NG 90° ELBOW - SOCKET FUSION
NI10125
1 1 0
ND
D1D
H1
H
L1
L2L
CODE ND D1 D L1 L2 L H1 H27NG20 1/2 => 20 mm 0.65 1.14 0.63 1.06 1.64 1.06 1.6327NG25 3/4 => 25 mm 0.93 1.40 0.63 1.22 1.93 1.22 1.9327NG32 1 => 32 mm 1.18 1.81 0.79 1.46 2.36 1.46 2.3627NG40 1 1/4 => 40 mm 1.42 2.21 0.87 1.69 2.80 1.69 2.7927NG50 1 1/2 => 50 mm 1.81 2.76 0.98 2.01 3.39 2.01 3.3927NG63 2 => 63 mm 2.32 3.47 1.14 2.44 4.17 2.44 4.1727NG75 2 1/2 => 75 mm 2.76 3.98 1.30 2.87 4.86 2.87 4.8627NG90 3 => 90 mm 3.37 4.45 1.46 3.25 5.47 3.25 5.4727NG110 3 1/2 => 110 mm 3.94 5.75 1.69 3.94 6.81 3.94 6.8127NG125 4 => 125 mm 4.45 6.50 1.87 4.92 8.17 4.92 8.17
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngf_NPT pollici\NI10057.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGF_NPT FEMALE THREADED 90° ELBOWS -
NPT - LEAD FREE BRASS NI10057
1 1 -1
H1 H
L1
L2
L
D
LTh. min
Thre
ad
HH
1
LTh. min
L2L
Thre
ad
L1
D
HH
1
D
Thre
adC
H
LTh. min
L2
LCH
L1
ND ND ND
L
D1 D
1
D1
CODE ND D1 D Thread L Thread min L1 L2 L H1 H CH LCH27NGF2012NPT (B) 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.54 2.11 1.08 1.81 - -27NGF2512NPT (A) 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.67 1.54 2.22 1.20 1.93 - -27NGF2534NPT (A) 3/4 => 25 mm 0.73 1.65 3/4" NPT 0.55 0.67 1.54 2.22 1.20 2.03 - -27NGF3212NPT (B) 1 => 32 mm 0.55 1.65 1/2" NPT 0.53 0.71 1.81 2.64 1.42 2.24 - -27NGF3234NPT (B) 1 => 32 mm 0.73 1.65 3/4" NPT 0.55 0.71 1.81 2.64 1.42 2.24 - -27NGF321NPT (B) 1 => 32 mm 0.95 2.13 1" NPT 0.66 0.79 1.81 2.64 1.85 2.91 - -27NGF401NPT (B) 1 1/4 => 40 mm 0.95 2.24 1" NPT 0.66 0.79 2.05 3.11 1.69 2.84 - -27NGF50114NPT (C) 1 1/2 => 50 mm 1.30 2.76 1"1/4 NPT 0.68 0.98 2.60 3.98 2.01 3.39 1.81 0.5927NGF50112NPT (C) 1 1/2 => 50 mm 1.56 2.76 1"1/2 NPT 0.68 0.98 2.60 3.98 2.01 3.39 2.17 0.5927NGF63112NPT (C) 2 => 63 mm 1.56 3.47 1"1/2 NPT 0.68 1.14 3.03 4.76 2.44 4.17 2.17 0.5927NGF632NPT (C) 2 => 63 mm 1.97 3.47 2" NPT 0.70 1.14 3.23 4.96 2.44 4.17 2.55 0.79
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngm_NPT pollici\NI10058.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGM _NPT
MALE THREADED 90° ELBOWS - NPT - LEAD FREE BRASS NI10058
1 1 -1
LTh. minL2
L
ND
L1H
1H
DTh
read
D1
CODE Dn D1 D Thread L Thread min L1 L2 L H1 H27NGM2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 2.13 2.70 1.08 1.8127NGM2512NPT 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.67 2.13 2.82 1.20 1.9327NGM2534NPT 3/4 => 25 mm 0.73 1.65 3/4" NPT 0.55 0.67 2.13 2.89 1.20 2.0327NGM3212NPT 1 => 32 mm 0.55 1.65 1/2" NPT 0.53 0.71 2.40 3.23 1.42 2.2427NGM3234NPT 1 => 32 mm 0.73 1.65 3/4" NPT 0.55 0.71 2.40 3.31 1.42 2.2427NGM321NPT 1 => 32 mm 0.95 2.13 1" NPT 0.68 0.79 2.56 3.41 1.85 2.91
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngtf_NPT pollici\NI10127.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGTF_NPT
FEMALE THREADED WINGED 90°-NPT - LEAD FREE BRASS NI10127
1 1 0
D1
Thre
adD
LTh. minL2
ND
L1
L3L4
H1
H
D2
CODE ND D1 D2 D Thread L Thread min L1 L2 L3 L4 L H1 H27NGTF2038NPT 1/2 => 20 mm 0.43 0.12 1.46 3/8" NPT 0.41 0.63 1.54 2.60 2.95 2.11 1.08 1.8127NGTF2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 1.54 2.60 2.95 2.11 1.08 1.81
L
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngtm_NPT pollici\NI10128.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGTM_NPT
MALE THREADED WINGED 90° - NPT - LEAD FREE BRASS NI10128
1 1 0
D1
Thre
adD
LTh. minL2
ND
L1
L3L4
H1
H
L
D2
CODE ND D1 D2 D Thread LThread min L1 L2 L3 L4 L H1 H27NGTM2038NPT 1/2 => 20 mm 0.43 0.12 1.46 3/8" NPT 0.41 0.63 1.97 2.60 2.95 2.54 1.08 1.8127NGTM2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 2.13 2.60 2.95 2.70 1.08 1.81
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngvrf_NPT pollici\NI10129.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGVRF_NPT
MOUNTING UNIT WITH ELBOWS 1/2" x 1/2" NPT NI10129
1 1 0
L3
L1 L2L
H1
H
L4D1
H3
H2
CODE L1 L2 L3 L4 L H1 H2 H3 H D127NGVRF2012NPT 3.05 10.04 5.91 1.58 16.14 1.18 1.81 0.59 2.21 0.20
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngvf_NPT pollici\NI10130.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGVF_NPT
TEMPLATE FOR EXTERNAL BATH TAPS1/2" x 1/2" NPT3/4" x 1/2" NPT
NI10130
1 1 0
A
B
C A
B
CAA
L2L1
D1
L
H1
H
CODE L1 L2 L H1 H D1 A-A B-A B-B C-C27NGVF2012NPT 1.97 0.59 13.94 1.99 2.19 0.16 5.91 6.30 6.69 7.0927NGVF2512NPT 1.97 0.59 13.94 2.21 2.19 0.16 5.91 6.30 6.69 7.09
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngof_NPTpollici\NI10131.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGOF_NPT
FEMALE THREADED 90° ELBOW FOR TEMPLATE - NPT - LEAD FREE BRASS NI10131
1 1 0
D1
Thre
adD
L1
NDLTh. minL2
L
H1
H
CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGOF2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.18 2.15 1.12 1.9127NGOF2512NPT 3/4 => 25 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.18 2.15 1.34 2.13
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nter_NPT pollici\NI10126.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTER_NPT
FEMALE THREADED BACK PLATE 90° ELBOW - NPT - LEAD FREE BRASS NI10126
1 1 0
D
LTh. minL2
ND
L
L1
H1
H
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H2 H27NTER2012NPT 1/2 => 20 mm 0.55 0.12 1.46 1/2" NPT 0.53 0.63 1.54 2.11 1.08 2.24 2.50
Thre
adD
1
D2
H2
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngom_NPT pollici\NI10132.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGOM_NPT
MALE THREADED 90° ELBOW FOR TEMPLATE - NPT - LEAD FREE BRASS NI10132
1 1 0
D1
Thre
adD
LTh. min NDL2
L
L1H
1H
CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGOM2012NPT 1/2 => 20 mm 0.55 1.46 1/2" NPT 0.53 0.63 1.77 2.74 1.12 1.91
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngmff_NPT pollici\NI10135.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGMFF_NPT
FEMALE THREADED STREET 90° ELBOW - NPT - LEAD FREE BRASS NI10135
1 1 0
NDL2
L
Thre
ad
LTh. min
H1
H
L1
D
D1
CODE ND D1 D Thread L Thread min L1 L2 L H1 H27NGMFF2012NPT 1/2 => 20 mm 0.52 1.14 1/2" NPT 0.53 0.63 1.22 1.77 1.46 2.17
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nc45 pollici\NI10136.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NC45 45° ELBOW - SOCKET FUSION
NI10136
1 1 0
NDD1
D
L1
H
L
CODE ND D1 D L1 L H1 H27NC4520 1/2 => 20 mm 0.65 1.14 0.63 1.30 0.85 1.8127NC4525 3/4 => 25 mm 0.93 1.34 0.63 1.81 0.97 2.1127NC4532 1 => 32 mm 1.18 1.65 0.79 2.21 1.14 2.5227NC4540 1 1/4 => 40 mm 1.42 2.09 0.87 2.64 1.26 2.8527NC4550 1 1/2 => 50 mm 1.87 2.60 0.98 3.29 1.56 3.5427NC4563 2 => 63 mm 2.36 3.27 1.14 4.02 1.77 4.1327NC4575 2 1/2 => 75 mm 2.76 3.90 1.30 5.10 2.56 5.7127NC4590 3 => 90 mm 3.39 4.86 1.46 5.71 2.24 5.5127NC45110 3 1/2 => 110 mm 3.94 5.75 1.69 6.79 2.76 6.6727NC45125 4 => 125 mm 4.45 6.50 1.87 7.64 3.07 7.46
H1
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nc45mf\NB10075.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NC45MF CURVA 45° MASCHIO/FEMMINA
STREET 45° ELBOW - SOCKET FUSION NB10075
1 1 0
L2
L1 H1
Dn2
Dn1
D
D1
CODE Dn1 Dn2 D1 D L1 L2 H127NC45MF20 20 20 13 30,5 14,5 15 19,527NC45MF25 25 25 16,5 34,5 16 16 2227NC45MF32 32 32 21 43 20 17 26
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nt pollici\NI10138.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NT TEE - SOCKET FUSION
NI10138
1 1 0
HH
1
LL2
L1
D1NDD
CODE ND D1 D L1 L2 L H1 H27NT20 1/2 => 20 mm 0.71 1.30 0.63 1.06 2.13 1.06 1.7127NT25 3/4 => 25 mm 0.83 1.38 0.67 1.24 2.48 1.24 1.9327NT32 1 => 32 mm 1.18 1.81 0.79 1.46 2.91 1.46 2.3627NT40 1 1/4 => 40 mm 1.42 2.21 0.87 1.69 3.39 1.69 2.8027NT50 1 1/2 => 50 mm 1.81 2.76 0.98 2.01 4.02 2.01 3.3927NT63 2 => 63 mm 2.32 3.47 1.14 2.44 4.88 2.44 4.1727NT75 2 1/2 => 75 mm 2.76 3.98 1.30 2.87 5.75 2.87 4.8627NT90 3 => 90 mm 3.47 4.45 1.46 3.31 6.61 3.31 5.5327NT110 3 1/2 => 110 mm 3.94 5.75 1.69 3.94 7.87 3.94 6.8127NT125 4 => 125 mm 4.45 6.50 1.87 4.92 9.84 4.92 8.17
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntf_ss NPT pollici\NI10192.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTF_SSNPT
FEMALE THREADED TEE - STAINLESS STEEL - NPT NI10192
1 1 0
H
H1
NDD
L1
L2L
LTh.
min
Thread
H1
H
LL2
L1
Thread
NDD
LTh.
min
TYPE A TYPE B
D2
D1 D1
D2
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTF2012SSNPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 1.54 2.1127NTF2512SSNPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 1.54 2.2227NTF2534SSNPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 1.54 2.2227NTF3212SSNPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 1.61 2.4427NTF3234SSNPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 1.61 2.4427NTF321SSNPT (B) 1 => 32 mm 0.95 2.13 2.13 1" NPT 0.66 0.79 1.85 3.74 1.54 2.60
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntm_NPT pollici\NI10059.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTM_NPT
MALE THREADED TEE - NPT - LEAD FREE BRASS NI10059
1 1 -1
L1
NDD
H1 H
D1Thread
D2
LL2
LTh.
min
L1
HH
1
NDD
D1Thread
D2L2
L
TYPE A TYPE B
LTh.
min
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTM2012NPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 2.13 2.7027NTM2512NPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 2.13 2.8227NTM2534NPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 2.21 2.8927NTM3212NPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 2.21 3.0327NTM3234NPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 2.28 3.1027NTM321NPT (B) 1 => 32 mm 0.95 2.13 1.65 1" NPT 0.68 0.79 1.87 3.74 2.50 3.35
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntm_ss NPT pollici\NI10193.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTM_SSNPT
MALE THREADED TEE - STAINLESS STEEL - NPT NI10193
1 1 0
L1
NDD
H1 H
D1Thread
D2
LL2
LTh.
min
L1
HH
1
NDD
D1Thread
D2L2
L
TYPE A TYPE B
LTh.
min
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTM2012SSNPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 2.13 2.7027NTM2512SSNPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 2.13 2.8227NTM2534SSNPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 2.21 2.8927NTM3212SSNPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 2.21 3.0327NTM3234SSNPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 2.28 3.1027NTM321SSNPT (B) 1 => 32 mm 0.95 2.13 1.65 1" NPT 0.68 0.79 1.87 3.74 2.50 3.35
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntr pollici\NI10139.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTR REDUCED TEE SOCKET FUSION
NI10139
1 5 0
CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H27NTR252025 3/4=> 25 mm 1/2=> 20 mm 3/4=> 25 mm 0.83 0.65 0.83 1.14 1.38 0.67 0.63 0.67 2.44 1.18 1.8727NTR253225 3/4=> 25 mm 1=> 32 mm 3/4=> 25 mm 0.83 0.83 0.83 1.81 1.81 0.67 0.79 0.67 2.91 1.49 2.4027NTR322032 1=> 32 mm 1/2=> 20 mm 1=> 32 mm 1.18 0.65 1.18 1.14 1.81 0.79 0.63 0.79 2.95 1.38 2.2827NTR322532 1=> 32 mm 3/4=> 25 mm 1=> 32 mm 1.18 0.83 1.18 1.38 1.81 0.79 0.67 0.79 2.95 1.38 2.2827NTR402040 1 1/4=>40 mm 1/2=> 20 mm 1 1/4=>40 mm 1.42 0.65 1.42 1.30 2.09 0.95 0.63 0.95 2.91 1.54 2.6027NTR402540 1 1/4=>40 mm 3/4=> 25 mm 1 1/4=>40 mm 1.42 0.83 1.42 1.30 2.09 0.95 0.79 0.95 2.91 1.54 2.6027NTR403240 1 1/4=>40 mm 1=> 32 mm 1 1/4=>40 mm 1.38 1.18 1.38 2.13 2.13 0.87 0.79 0.87 3.43 1.69 2.7627NTR502050 1 1/2=>50 mm 1/2=> 20 mm 1 1/2=>50 mm 1.85 0.65 1.85 1.69 2.60 1.02 0.63 1.02 3.43 1.85 3.1527NTR502550 1 1/2=>50 mm 3/4=> 25 mm 1 1/2=>50 mm 1.85 0.83 1.85 1.69 2.60 1.02 0.79 1.02 3.43 1.85 3.1527NTR503250 1 1/2=>50 mm 1=> 32 mm 1 1/2=>50 mm 1.85 1.18 1.85 1.69 2.60 1.02 0.79 1.02 3.43 1.85 3.1527NTR504050 1 1/2=>50 mm 1 1/4=>40 mm 1 1/2=>50 mm 1.69 1.42 1.69 2.60 2.60 0.91 0.87 0.91 4.02 1.97 3.2727NTR632563 2 => 63 mm 3/4=> 25 mm 2 => 63 mm 2.36 0.83 2.36 2.09 3.27 1.18 0.83 1.18 4.02 2.13 3.7827NTR633263 2 => 63 mm 1=> 32 mm 2 => 63 mm 2.36 1.18 2.36 2.09 3.27 1.18 0.83 1.18 4.02 2.13 3.7827NTR634063 2 => 63 mm 1 1/4=>40 mm 2 => 63 mm 2.36 1.42 2.36 2.09 3.27 1.18 0.91 1.18 4.02 2.13 3.7827NTR635063 2 => 63 mm 1 1/2=>50 mm 2 => 63 mm 1.97 1.81 1.97 3.15 3.15 0.98 1.02 0.98 4.80 2.52 4.09
H
D4L
L1 L3
ND
1
L2
H1N
D3D
ND2D2
D1
D3
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntr_11_F pollici - SDR 11\NI10224.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTR11_F
FEMALE SIDE FUSION REDUCER TEESDR 11 NI10224
1 3 -0
CODE ND1 ND2 S1 D L1 L2 L H1 H27NTR119040F90 3 => 90 mm 1 1/4 => 40 mm 0.32 2.48 2.95 0.87 8.98 3.66 5.4327NTR119050F90 3 => 90 mm 1 1/2 => 50 mm 0.32 2.76 2.95 0.98 9.26 3.86 5.6327NTR119063F90 3 => 90 mm 2 => 63 mm 0.32 3.54 2.95 1.14 10.04 4.17 5.9427NTR1111040F110 3 1/2 => 110 mm 1 1/4 => 40 mm 0.39 2.48 3.05 0.87 9.17 4.05 6.2227NTR1111050F110 3 1/2 => 110 mm 1 1/2 => 50 mm 0.39 2.76 3.05 0.98 9.45 4.25 6.4227NTR1111063F110 3 1/2 => 110 mm 2 => 63 mm 0.39 3.54 3.05 1.14 10.23 4.56 6.7327NTR1112540F125 4 => 125 mm 1 1/4 => 40 mm 0.45 2.48 3.35 0.87 9.76 4.35 6.8127NTR1112550F125 4 => 125 mm 1 1/2 => 50 mm 0.45 2.76 3.35 0.98 10.04 4.55 7.0127NTR1112563F125 4 => 125 mm 2 => 63 mm 0.45 3.54 3.35 1.14 10.82 4.86 7.3227NTR1112575F125 4 => 125 mm 2 1/2 => 75 mm 0.45 4.33 3.35 1.30 11.61 4.51 6.9727NTR1112590F125 4 => 125 mm 3 => 90 mm 0.45 4.88 3.35 1.46 12.16 4.31 6.7727NTR1116040F160 6 => 160 mm 1 1/4 => 40 mm 0.58 2.48 3.44 0.87 9.96 5.04 8.19
ND2D
L1
L2
L
H
H1
S1
ND
1
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncr pollici\NI10140.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCR REDUCED CROSS
NI10140
1 1 0
ND
2D
3
ND1D
D2
L2
L3L
L1H
1H
D1
CODE ND1 ND2 D1 D2 D3 D L1 L2 L3 L H1 H27NCR402020 1 1/4 => 40 mm 1/2 => 20 mm 1.42 0.65 1.30 2.09 0.87 0.63 1.46 2.91 1.58 3.1527NCR402525 1 1/4 => 40 mm 3/4 => 25 mm 1.42 0.93 1.30 2.09 0.87 0.63 1.49 2.91 1.58 3.15
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nr pollici\NI10142.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NR REDUCING SOCKET FUSION
BUSHINGS NI10142
1 3 0
L
D
S1
L2L1
ND
2
ND
1
CODE ND1 S1 ND2 D1 D L1 L2 L27NR2520 3/4 => 25 mm 0.17 1/2 => 20 mm - 1.14 0.75 0.63 1.6127NR3225 1 => 32 mm 0.21 3/4 => 25 mm - 1.38 0.87 0.67 1.7327NR4032 1 1/4 => 40 mm 0.26 1 => 32 mm - 1.81 0.98 0.79 1.9727NR5040 1 1/2 => 50 mm 0.33 1 1/4 => 40 mm - 2.21 1.10 0.87 2.1727NR6350 2 => 63 mm 0.41 1 1/2 => 50 mm - 2.76 1.26 0.98 2.1327NR7563 2 1/2 => 75 mm 0.49 2 => 63 mm - 3.27 1.42 1.14 2.9127NR9075 3 => 90 mm 0.59 2 1/2 => 75 mm - 3.78 1.46 1.34 3.1527NR11090 3 1/2 => 110 mm 0.72 3 => 90 mm - 4.51 1.46 1.46 3.0327NR125110 4 => 125 mm 0.82 3 1/2 => 110 mm - 5.97 1.81 1.58 3.62
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nr_11MM pollici - SDR 11\NI10143.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NR_11MM
LONG SPIGOT MALE CONCENTRIC REDUCERSSDR11
NI10143
1 1 -1
L1 L2
L
ND
1
ND
2
S1 S2
CODE ND1 S1 ND2 S2 L1 L2 L27NR754011MM 2 1/2 => 75 mm 0.27 1 1/4 => 40 mm 0.15 2.56 1.89 5.6327NR755011MM 2 1/2 => 75 mm 0.27 1 1/2 => 50 mm 0.18 2.56 1.89 5.5527NR756311MM 2 1/2 => 75 mm 0.27 2 => 63 mm 0.23 2.80 2.52 5.9027NR905011MM 3 => 90 mm 0.32 1 1/2 => 50 mm 0.18 2.87 2.24 5.9827NR906311MM 3 => 90 mm 0.32 2 => 63 mm 0.23 2.80 2.24 5.9027NR907511MM 3 => 90 mm 0.32 2 1/2 => 75 mm 0.27 3.19 2.84 6.8927NR1106311MM 3 1/2 => 110 mm 0.39 2 => 63 mm 0.23 3.35 2.76 6.8927NR1107511MM 3 1/2 => 110 mm 0.39 2 1/2 => 75 mm 0.27 3.47 2.28 7.2827NR1109011MM 3 1/2 => 110 mm 0.39 3 => 90 mm 0.32 3.07 2.76 6.8927NR1257511MM 4 => 125 mm 0.45 2 1/2 => 75 mm 0.27 3.62 2.36 7.8427NR1259011MM 4 => 125 mm 0.45 3 => 90 mm 0.32 3.39 2.76 7.3227NR12511011MM 4 => 125 mm 0.45 3 1/2 => 110 mm 0.39 3.50 3.03 7.3627NR16011011MM 6 => 160 mm 0.57 3 1/2 => 110 mm 0.39 4.06 3.46 8.4627NR16012511MM 6 => 160 mm 0.57 4 => 125 mm 0.45 4.02 3.58 8.4327NR20016011MM 8 => 200 mm 0.72 6 => 160 mm 0.58 4.65 3.98 9.45
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nman pollici\NI10144.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NMAN COUPLINGS - SOCKET FUSION
NI10144
1 1 0
ND
D1 D
L1L
CODE ND D1 D L1 L27NMAN20 1/2 => 20 mm 0.71 1.14 0.67 1.3827NMAN25 3/4 => 25 mm 0.79 1.38 0.71 1.5427NMAN32 1 => 32 mm 1.18 1.81 0.79 1.6927NMAN40 1 1/4 => 40 mm 1.46 2.21 0.87 1.8927NMAN50 1 1/2 => 50 mm 1.85 2.76 0.98 2.1327NMAN63 2 => 63 mm 2.36 3.47 1.14 2.4427NMAN75 2 1/2 => 75 mm 2.76 3.98 1.30 2.8027NMAN90 3 => 90 mm 3.45 4.51 1.46 3.0327NMAN110 3 1/2 => 110 mm 4.17 5.95 1.69 3.6227NMAN125 4 => 125 mm 4.61 6.30 1.87 4.02
PRODUCT RANGE
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nctv pollici\NI10141.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCTV SIDE ELBOW THREE OUTLETS -
SOCKET FUSION NI10141
1 1 0
D1NDD
L1L2
L
H1
H
CODE ND D1 D L1 L2 L H1 H27NCTV20 1/2" => 20 mm 0.71 1.10 0.59 1.02 1.58 1.02 1.58
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntf_NPT pollici\NI10060.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTF_NPT FEMALE THREADED TEE - NPT - LEAD
FREE BRASS NI10060
1 1 -1
H
H1
NDD
L1
L2L
LTh.
min
Thread
H1
H
LL2
L1
Thread
NDD
LTh.
min
TYPE A TYPE B
D2
D1 D1
D2
CODE ND D1 D2 D Thread L Thread min L1 L2 L H1 H27NTF2012NPT (A) 1/2 => 20 mm 0.56 1.46 1.14 1/2" NPT 0.53 0.63 1.08 2.17 1.54 2.1127NTF2512NPT (A) 3/4 => 25 mm 0.56 1.46 1.38 1/2" NPT 0.53 0.67 1.20 2.40 1.54 2.2227NTF2534NPT (A) 3/4 => 25 mm 0.73 1.65 1.38 3/4" NPT 0.55 0.67 1.20 2.40 1.54 2.2227NTF3212NPT (B) 1 => 32 mm 0.56 1.65 1.65 1/2" NPT 0.53 0.79 1.48 2.95 1.61 2.4427NTF3234NPT (B) 1 => 32 mm 0.73 1.65 1.65 3/4" NPT 0.55 0.79 1.48 2.95 1.61 2.4427NTF321NPT (B) 1 => 32 mm 0.95 2.13 2.13 1" NPT 0.66 0.79 1.85 3.74 1.54 2.60
PP-RCTwww.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\TnirrB\NB10053.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OFREV.TNIRRBNIRON MONO BLUE PP-RCT PIPE
NB10053
1 1 0
CODESDRDnS minDiWeight (Kg/m)27TNIRRB20737.3202,814,400,1527TNIRRB25737.3253,518,000,2327TNIRRB3299323,624,800,3127TNIRRB401111403,732,600,4027TNIRRB501111504,640,800,6327TNIRRB631111635,851,400,9927TNIRRB751111756,861,401,3727TNIRRB901111908,273,601,9927TNIRRB110111111010,090,002,9627TNIRRB125111112511,4102,203,8427TNIRRB160111116014,6130,806,2227TNIRRB631717633,855,400,6827TNIRRB751717754,566,000,9727TNIRRB901717905,479,201,3927TNIRRB11017171106,696,802,0327TNIRRB12517171257,4110,202,6027TNIRRB16017171609,5141,004,25
S min
Dn Di
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Tnirr\NB10054.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OFREV.TNIRRNIRON MONO GREY PP-RCT PIPE
NB10054
1 2 0
CODESDRDnS minDiWeight (Kg/m)27TNIRR20737.3202,814,400,1527TNIRR25737.3253,518,000,2327TNIRR3299323,624,800,3127TNIRR401111403,732,600,4027TNIRR501111504,640,800,6327TNIRR631111635,851,400,9927TNIRR751111756,861,401,3727TNIRR901111908,273,601,9927TNIRR110111111010,090,002,9627TNIRR125111112511,4102,203,8427TNIRR160111116014,6130,806,2227TNIRR200111120018,2163,609,7627TNIRR250111125022,7204,6015,027TNIRR315111131528,6257,8023,727TNIRR355111135532,2290,6030,027TNIRR400111140036,3327,4038,227TNIRR450111145040,9368,2048,127TNIRR500111150045,4409,2059,127TNIRR560111156050,8458,4074,027TNIRR630111163057,2515,6093,5
S min
Dn Di
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\TnirCL\NB10055.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OFREV.TNIRCLNIRON MULTI CLIMA PP-RCT PIPE
NB10055
1 3 0
CODESDRDnS minDiWeight (kg/m)27TNIRCL20737.3202,814,400,1627TNIRCL2573 7.3253,518,000,2527TNIRCL32737.3324,423,200,4027TNIRCL40737.3405,529,000,6227TNIRCL50737.3506,936,200,9527TNIRCL63737.3638,645,801,4827TNIRCL75737.37510,354,402,1027TNIRCL90737.39012,365,403,0127TNIRCL110737.311015,179,804,5227TNIRCL125737.312517,190,805,7827TNIRCL160737.316021,9116,209,3627TNIRCL200737.320027,4145,2015,5727TNIRCL250737.325034,2181,6024,3627TNIRCL315737.331541,1232,8038,2527TNIRCL355737.335548,5258,0048,29
27TNIRCL329 9323,624,800,33
DnS
min
Di
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ng9073_MM SDR7.3\NB10005.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NG9073_MM
90° ELBOW - LONG SPIGOT SDR 7.3PP-RCT
NB10005
1 2 0
CODE Dn S min L1 L2 H27NG907363MM 63 8,6 70 120 15427NG907375MM 75 10,3 70 130 16227NG907390MM 90 12,3 89 146 19727NG9073110MM 110 15,1 87 155 212,527NG9073125MM 125 17,1 95 185 250,527NG9073160MM 160 21,9 101 210 293,5
L1L2
H
S m
inDn
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nc4573_MM SDR7.3\NB10014.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NC4573_MM
45° ELBOW - LONG SPIGOTSDR 7.3 PP-RCT
NB10014
1 2 0
S min
L1
H
CODE Dn S min L1 H27NC457363MM 63 8,6 69 17527NC457375MM 75 10,3 73 19027NC457390MM 90 12,3 90 23527NC4573110MM 110 15,1 87 24227NC4573125MM 125 17,1 95 264,527NC4573160MM 160 21,9 103 311
Dn
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nt73_MM SDR7.3\NB10018.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NT73_MM
TEE - LONG SPIGOT SDR 7.3 PP-RCT
NB10018
1 2 0
S m
in
L1L2
CODE Dn S min L1 L227NT7363MM 63 8,6 70 12027NT7375MM 75 10,3 70 11727NT7390MM 90 12,3 90 148,527NT73110MM 110 15,1 87 15527NT73125MM 125 17,1 95 18527NT73160MM 160 21,9 110 217
Dn
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ntr11_M SDR11\NB10022.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTR11_M MALE SIDE FUSION REDUCED TEE - LONG
SPIGOTSDR 11 PP-RCT
NB10022
1 4 0
CODE Dn1 Dn2 S1 min S2 min L1 L2 L H1 H27NTR1116063M160 160 63 14,6 5,8 97 35 300 141 22127NTR1116075M160 160 75 14,6 6,8 97 82,5 320 185 26527NTR1116090M160 160 90 14,6 8,2 97 78 330 189 26927NTR11160110M160 160 110 14,6 10,0 97 78 334 196 27627NTR11160125M160 160 125 14,6 11,4 97 100 369 223 30327NTR11200M63200 200 63 18,2 5,8 106,5 35 320 161 26127NTR1120075M200 200 75 18,2 6,8 106,5 82,5 320 205 30527NTR1120090M200 200 90 18,2 8,2 106,5 78 350 209 30927NTR11200110M200 200 110 18,2 10,0 106,5 78 373 216 31627NTR11200125M200 200 125 18,2 11,4 106,5 100 388 243 34327NTR11200160M200 200 160 18,2 14,6 106,5 97 438 235 33527NTR1125063M250 250 63 22,7 5,8 121 35 343 186 31127NTR1125075M250 250 75 22,7 6,8 121 82,5 345 205 35527NTR1125090M250 250 90 22,7 8,2 121 78 378 234 35927NTR11250110M250 250 110 22,7 10,0 121 78 402 241 36627NTR11250125M250 250 125 22,7 11,4 121 100 417 268 39327NTR11250160M250 250 160 22,7 14,6 121 97 467 313 43827NTR11250200M250 250 200 22,7 18,2 121 - - - -
S1 m
inD
n 1
L1
L2
L
HH
1
S2 min
Dn2
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nwye11 SDR11\NB10086.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NWYE11 TEE A 45° - CODOLO LUNGO
WYE LATERAL 45° - LONG SPIGOTSDR 11
NB10086
1 1 0
L
45°L1
S m
inDn
CODE Dn S min L1 L27NWYE1190 90 8,2 200 55627NWYE11110 110 10,0 200 55627NWYE11125 125 11,4 200 57727NWYE11160 160 14,6 200 62627NWYE11200 200 18,2 200 74027NWYE11250 250 22,7 250 96027NWYE11315 315 28,6 250 115027NWYE11355 355 32,2 250 129027NWYE11400 400 36,3 250 1405
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngmf pollici\NI10134.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGMF STREET 90° ELBOW -SOCKET FUSION
NI10134
1 1 0
D1
H1
H
L1
L
ND
2
L2ND1
D
CODE ND1 ND2 D1 D L1 L2 L H1 H27NGMF20 1/2 => 20 mm 1/2 => 20 mm 0.52 1.18 0.63 1.14 1.54 1.12 1.7127NGMF25 3/4 => 25 mm 3/4 => 25 mm 0.65 1.38 0.63 1.30 1.79 1.38 2.0727NGMF32 1 => 32 mm 1 => 32 mm 0.95 1.69 0.79 1.34 1.97 1.87 2.7027NGMF40 1 1/4 => 40 mm 1 1/4 => 40 mm 0.95 1.69 0.49 1.34 1.97 1.87 2.70
FEMALE THREADED ADAPTER - SOCKET FUSIONCODE inchesNRFF (W/LEAD FREE BRASS)NRFF_L (STANDARD BRASS)NRFF_SS (W/NPT STAINLESS STEEL) from ½” x ½” NPT to 5” x 4” NPT
MALE THREADED ADAPTERCODE inchesNRFM (W/LEAD FREE BRASS)NRFM_L (STANDARD BRASS)NRFM_SS (W/NPT STAINLESS STEEL) from ½” x ½” NPT to 5” x 4” NPT
FEMALE THREADED ADAPTER - LONG SPIGOTCODE inchesNRFF11 (W/LEAD FREE BRASS) from 1¼” x ½” NPT to 5” x 4”NPTSDR 11
MALE THREADED ADAPTER - LONG SPIGOTCODE inchesNRFM11 (W/LEAD FREE BRASS) from 1¼” x ½” NPT to 5” x 4”NPTSDR 11
GROOVED MECHANICAL COUPLING ADAPTERCODE inchesNRV_SS from ½” to 1¼”(STAINLESS STEEL)
SDR 11PEX ADAPTER (COLD EXPANSION - ASTM1960)
CODE inchesNPR from ½” x ½” to 1” x 1”
PEX ADAPTER (CRIMP RING - ASTM1807)CODE inchesNPRCR from ½” x ½” to 1” x 1”
COPPER ADAPTERCODE inchesNCUA_L from ½” x ½” CTS
to 1” x 1” CTS
COPPER STUB OUT TRANSITION FITTINGCODE inchesNCUT_L from ½” x ½” CTS
to 1” x 1” CTS
COPPER STUB OUT ELBOW TRANSITION FITTINGCODE inchesNCUTC_L from ½” x ½” CTS
to 1” x 1” CTS
ALL-PLASTIC UNIONS WITH SOCKET FUSION ENDSCODE inchesNBRF from ½” to 1¼”
UNION W/STANDARD BRASS NUTS AND SOCKET FUSION ENDSCODE inchesNCSJ from ½” x ½” to 2” x 2”
INSTABRANCHTM WELDING SOCKLET W/SOCKET FUSION OUTLETCODE inchesNGS from 1½” x 1¼” to 2” x 24”
INSTABRANCHTM WELDING SOCKLET W/SOCKET FEMALE OUTLETCODE inchesNGSF (W/LEAD FREE BRASS)NGSF_L (STANDARD BRASS)NGSF_SS (W/NPT STAINLESS STEEL) from 1¼” x 1½” NPT to 24” x 1” NPT
INSTAHEADERTM PEX ADAPTER (COLD EXPANSION - ASTM F 1960)CODE inchesNPGS from 1¼” x ½” to 5” x 1”
INSTAHEADERTM PEX ADAPTER (CRIMP RING - ASTM F 1807)CODE inchesNPGSCR from 1¼” x ½” to 5” x 1”
END CAPCODE inchesNCC (SOCKET FUSION) from ½” to 5”NCC_M (LONG SPIGOT)SDR 11 - 17 from 2” to 8”NCC_MS (SHORT SPIGOT)SDR 7.3-11-17 from 6” to 24”
STUB FLANGECODE inchesNCOSA (SOCKET FUSION) from 1” to 5”NCRT (LONG SPIGOT)SDR 7.3-11-17 from 1” to 12”NCRT_S (SHORT SPIGOT)SDR 11-17 from 12” to 24”
BACKING RING ANSI/ASA 150CODE inchesFLAACPP from 1” to 10”FLAVN from 12” to 22”FLAAC 24”
GASKET LOW - STRESS EPDMCODE inchesGRET from 1” x 18”
ELECTROFUSION FITTINGS
ELECTROFUSION COUPLINGCODE inches
NME from ½” to 18”SDR 11NME_17 from 12” to 24”
ELECTROFUSION REDUCERCODE inchesNRDE from ½” x ¾” to 8” x 6”SDR 11
ELECTROFUSION 90° ELBOWCODE inchesNGEM from ½” to 8”SDR 11
ELECTROFUSION 45° ELBOWCODE inchesNCEM from 1” to 8”SDR 11
ELECTROFUSION TEECODE inchesNTCE from ½” to 8”SDR 11
ELECTROLETTM BRANCH FITTINGSCODE inchesNCOL from 1¼” x ¾” to 12” x 5”
SDR 11
VALVES
PPR TRUE UNION BALL VALVECODE inchesNRSPPVKD from ½” to 4”
PPR BALL VALVECODE inchesNRSL from ½” to 1”
TRUE UNION BALL VALVECODE inchesNRSFN from 1¼” to 2”
PP-RCT COMPRESSION FITTING
COUPLINGCODE inches
NKMAN from ½” to 4”
90° ELBOWCODE inches
NKG from ½” to 4”
REDUCERCODE inchesNKR from ¾”x½” to 4”x3"
90° TEECODE inchesNKT from ½” to 4”
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm_NPT pollici\NI10062.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFM_NPT
MALE THREADED ADAPTERS NPT - LEAD FREE BRASS NI10062
1 1 -1
Thre
adD
LTh. minL1
L
ND
D1
Thre
ad
DLTh. min
L1
L
LCH
CH
NDD1
Thre
adC
HD
LTh. minL1
L
NDD1
TYPE A TYPE B TYPE C LCH
CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFM2012NPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 2.17 - -27NRFM2034NPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 2.48 - -27NRFM2512NPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 2.21 - -27NRFM2534NPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.69 2.44 - -27NRFM3234NPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.79 2.70 - -27NRFM321NPT (A) 1 => 32 mm 1" NPT 0.68 0.95 2.13 0.79 2.80 - -27NRFM401NPT (C) 1 1/4 => 40 mm 1" NPT 0.68 0.95 2.21 0.87 3.39 1.34 0.5127NRFM40114NPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.71 1.30 2.56 0.87 3.58 1.65 0.5927NRFM50114NPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.71 1.30 2.76 0.98 3.66 1.65 0.5927NRFM50112NPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.72 1.50 2.95 0.98 3.68 1.97 0.5927NRFM63112NPT (C) 2 => 63 mm 1"1/2 NPT 0.72 1.50 3.47 1.14 3.84 1.97 0.5927NRFM632NPT (B) 2 => 63 mm 2" NPT 0.76 1.95 3.62 1.14 4.13 2.36 0.7127NRFM752NPT (C) 2 1/2 => 75 mm 2" NPT 0.76 1.95 4.06 1.30 4.29 2.36 0.7127NRFM75212NPT (B) 2 1/2 => 75 mm 2"1/2 NPT 1.14 2.50 4.33 1.30 4.41 3.15 0.7927NRFM903NPT (B) 3 => 90 mm 3" NPT 1.20 2.95 5.08 1.46 5.08 3.54 0.9127NRFM1104NPT (B) 3 1/2 => 110 mm 4" NPT 1.30 3.92 6.30 1.69 5.83 4.53 1.1827NRFM1254NPT (C) 4 => 125 mm 4" NPT 1.30 3.92 6.30 1.87 6.00 4.53 1.18
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff_NPT pollici\NI10061.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFF_NPT
FEMALE THREADED ADAPTERS NPT - LEAD FREE BRASS NI10061
1 1 -1
NDD1D
L1L
LTh. min
Thre
ad D
Thre
ad
NDD1
LLTh. min
LCH
L1
CH D CH
Thre
ad
NDD1
L1LTh. minL
LCHTYPE A TYPE B TYPE C
CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFF2012NPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 1.58 - -27NRFF2034NPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 1.81 - -27NRFF2512NPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 1.61 - -27NRFF2534NPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.71 1.81 - -27NRFF3234NPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.85 2.03 - -27NRFF321NPT (A) 1 => 32 mm 1" NPT 0.66 0.95 2.13 0.79 2.05 - -27NRFF401NPT (C) 1 1/4 => 40 mm 1" NPT 0.66 0.95 2.21 0.87 2.64 1.50 0.5927NRFF40114NPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.68 1.30 2.60 0.87 2.72 1.81 0.5927NRFF50114NPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.68 1.30 2.76 0.98 2.80 1.81 0.5927NRFF50112NPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.68 1.56 2.95 0.98 2.84 2.17 0.5927NRFF63112NPT (C) 2 => 63 mm 1"1/2 NPT 0.68 1.56 3.47 1.14 2.95 2.17 0.5927NRFF632NPT (B) 2 => 63 mm 2" NPT 0.70 1.97 3.62 1.14 3.15 2.56 0.7927NRFF752NPT (C) 2 1/2 =>75 mm 2" NPT 0.70 1.97 4.06 1.30 3.31 2.56 0.7927NRFF75212NPT (B) 2 1/2 =>75 mm 2"1/2 NPT 0.93 2.50 4.33 1.30 3.50 3.15 0.7927NRFF903NPT (B) 3 => 90 mm 3" NPT 1.02 2.95 5.08 1.46 3.90 3.74 0.9127NRFF1104NPT (B) 3 1/2 => 110 mm 4" NPT 1.09 3.92 6.30 1.69 4.37 4.72 1.1827NRFF1254NPT (C) 4 => 125 mm 4" NPT 1.09 3.92 6.30 1.87 4.55 4.72 1.18
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff_ss NPT pollici\NI10184.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFF_SSNPT
FEMALE THREADED ADAPTERS NPT - STAINLESS STEEL NI10184
1 1 0
NDD1D
L1L
LTh. min
Thre
ad D
Thre
ad
NDD1
LLTh. min
LCH
L1
CH D CH
Thre
ad
NDD1
L1LTh. minL
LCHTYPE A TYPE B TYPE C
CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFF2012SSNPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 1.58 - -27NRFF2034SSNPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 1.81 - -27NRFF2512SSNPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 1.61 - -27NRFF2534SSNPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.71 1.81 - -27NRFF3234SSNPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.85 2.03 - -27NRFF321SSNPT (A) 1 => 32 mm 1" NPT 0.66 0.95 2.13 0.79 2.05 - -27NRFF401SSNPT (C) 1 1/4 => 40 mm 1" NPT 0.66 0.95 2.21 0.87 2.64 1.50 0.5927NRFF40114SSNPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.68 1.30 2.60 0.87 2.72 1.81 0.5927NRFF50114SSNPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.68 1.30 2.76 0.98 2.80 1.81 0.5927NRFF50112SSNPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.68 1.56 2.95 0.98 2.84 2.17 0.5927NRFF63112SSNPT (C) 2 => 63 mm 1"1/2 NPT 0.68 1.56 3.47 1.14 2.95 2.17 0.5927NRFF632SSNPT (B) 2 => 63 mm 2" NPT 0.70 1.97 3.62 1.14 3.15 2.56 0.7927NRFF752SSNPT (C) 2 1/2 =>75 mm 2" NPT 0.70 1.97 4.06 1.30 3.31 2.56 0.7927NRFF75212SSNPT (B) 2 1/2 =>75 mm 2"1/2 NPT 0.93 2.50 4.33 1.30 3.50 3.15 0.7927NRFF903SSNPT (B) 3 => 90 mm 3" NPT 1.02 2.95 5.08 1.46 3.90 3.74 0.9127NRFF1104SSNPT (B) 3 1/2 => 110 mm 4" NPT 1.09 3.92 6.30 1.69 4.37 4.72 1.1827NRFF1254SSNPT (C) 4 => 125 mm 4" NPT 1.09 3.92 6.30 1.87 4.55 4.72 1.18
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm_ss NPT pollici\NI10186.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFM_SSNPT
MALE THREADED ADAPTERS NPT - STAINLESS STEEL NI10186
1 1 0
Thre
adD
LTh. minL1
L
ND
D1
Thre
ad
DLTh. min
L1
L
LCH
CH
NDD1
Thre
adC
HD
LTh. minL1
L
NDD1
TYPE A TYPE B TYPE C LCH
CODE ND Thread L Thread min D1 D L1 L CH LCH27NRFM2012SSNPT (A) 1/2 => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 2.17 - -27NRFM2034SSNPT (A) 1/2 => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 2.48 - -27NRFM2512SSNPT (A) 3/4 => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 2.21 - -27NRFM2534SSNPT (A) 3/4 => 25 mm 3/4" NPT 0.55 0.71 1.65 0.69 2.44 - -27NRFM3234SSNPT (A) 1 => 32 mm 3/4" NPT 0.55 0.71 1.79 0.79 2.70 - -27NRFM321SSNPT (A) 1 => 32 mm 1" NPT 0.68 0.95 2.13 0.79 2.80 - -27NRFM401SSNPT (C) 1 1/4 => 40 mm 1" NPT 0.68 0.95 2.21 0.87 3.39 1.34 0.5127NRFM40114SSNPT (B) 1 1/4 => 40 mm 1"1/4 NPT 0.71 1.30 2.56 0.87 3.58 1.65 0.5927NRFM50114SSNPT (C) 1 1/2 => 50 mm 1"1/4 NPT 0.71 1.30 2.76 0.98 3.66 1.65 0.5927NRFM50112SSNPT (B) 1 1/2 => 50 mm 1"1/2 NPT 0.72 1.50 2.95 0.98 3.68 1.97 0.5927NRFM63112SSNPT (C) 2 => 63 mm 1"1/2 NPT 0.72 1.50 3.47 1.14 3.84 1.97 0.5927NRFM632SSNPT (B) 2 => 63 mm 2" NPT 0.76 1.95 3.62 1.14 4.13 2.36 0.7127NRFM752SSNPT (C) 2 1/2 => 75 mm 2" NPT 0.76 1.95 4.06 1.30 4.29 2.36 0.7127NRFM75212SSNPT (B) 2 1/2 => 75 mm 2"1/2 NPT 1.14 2.50 4.33 1.30 4.41 3.15 0.7927NRFM903SSNPT (B) 3 => 90 mm 3" NPT 1.20 2.95 5.08 1.46 5.08 3.54 0.9127NRFM1104SSNPT (B) 3 1/2 => 110 mm 4" NPT 1.30 3.92 6.30 1.69 5.83 4.53 1.1827NRFM1254SSNPT (C) 4 => 125 mm 4" NPT 1.30 3.92 6.30 1.87 6.00 4.53 1.18
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngs pollici\NI10243.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGS WELDING SADDLES W/SOCKET
FUSION OUTLETS NI10243
1 3 -3
CODE ND1 ND2 D1 D L1 L2 L27NGS2040 1/2" => 20 mm 1 ¼" => 40 mm 0.98 1.38 0.59 0.79 1.4427NGS2050 1/2" => 20 mm 1 ½" = > 50 mm 0.98 1.38 0.59 0.79 1.2827NGS206375 1/2" => 20 mm 2"= > 63 mm
2 ½" = > 75 mm 0.98 1.38 0.59 0.79 1.20
27NGS2090110125 1/2" => 20 mm3" = > 90 mm4" = > 110 mm5" = > 125 mm
0.98 1.38 0.59 0.79 1.16
27NGS20160200 1/2" => 20 mm 6" = > 160 mm8" = > 200 mm 0.98 1.38 0.59 0.79 1.12
27NGS20250315 1/2" => 20 mm 10" = > 250 mm12" = > 315 mm 0.98 1.38 0.59 0.79 1.10
27NGS20355630 1/2" => 20 mm 14"-24" => 355-630 mm 0.98 1.38 0.59 0.79 1.10
27NGS2540 3/4" => 25 mm 1 ¼" => 40 mm 0.98 1.38 0.59 0.85 1.5027NGS2550 3/4" => 25 mm 1 ½" = > 50 mm 0.98 1.38 0.59 0.85 1.3327NGS256375 3/4" => 25 mm 2"= > 63 mm
2 ½" = > 75 mm 0.98 1.38 0.65 0.85 1.26
27NGS2590110125 3/4" => 25 mm3" = > 90 mm4" = > 110 mm5" = > 125 mm
0.98 1.38 0.65 0.85 1.18
27NGS25160200 3/4" => 25 mm 6" = > 160 mm8" = > 200 mm 0.98 1.38 0.65 0.85 1.18
27NGS25250315 3/4" => 25 mm 10" = > 250 mm12" => 315 mm 0.98 1.38 0.65 0.85 1.16
27NGS25355630 3/4" => 25 mm 14"-24" => 355-630 mm 0.98 1.38 0.65 0.85 1.16
D1
L2L1
L
ND2
ND
1 D
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngsf_NPT pollici\NI10145.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGSF_NPT
FEMALE THREADED SADDLE - LEAD FREE BRASS NI10145
1 1 0
NDD
1S
LTh. min
L
D
CODE ND S Thread L Thread min D1 D2 D L1 L27NGSF4012NPT 1 1/4 = 40 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF5012NPT 1 1/2 = 50 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF6312NPT 2 => 63 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8327NGSF7512NPT 2 1/2 => 75 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.7727NGSF9012NPT 3 => 90 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8427NGSF11012NPT 3 1/2 => 110 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.9427NGSF5034NPT 1 1/2 = 50 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.71 1.63 2.0527NGSF6334NPT 2 => 63 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8327NGSF7534NPT 2 1/2 => 75 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.7727NGSF9034NPT 3 => 90 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8427NGSF11034NPT 3 1/2 => 110 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.9627NGSF631NPT 2 => 63 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.2627NGSF751NPT 2 1/2 => 75 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1427NGSF901NPT 3 => 90 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1827NGSF1101NPT 3 1/2 => 110 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.27
L1
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngsf_ss NPT pollici\NI10187.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGSF_SSNPT
FEMALE THREADED SADDLE - STAINLESS STEEL NI10187
1 1 0
NDD
1S
LTh. min
L
D
CODE ND S Thread L Thread min D1 D2 D L1 L27NGSF4012SSNPT 1 1/4 = 40 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF5012SSNPT 1 1/2 = 50 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.42 1.10 1.5627NGSF6312SSNPT 2 => 63 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8327NGSF7512SSNPT 2 1/2 => 75 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.7727NGSF9012SSNPT 3 => 90 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.8427NGSF11012SSNPT 3 1/2 => 110 mm 0.17 1/2" NPT 0.53 0.98 0.56 1.46 1.18 1.9427NGSF5034SSNPT 1 1/2 = 50 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.71 1.63 2.0527NGSF6334SSNPT 2 => 63 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8327NGSF7534SSNPT 2 1/2 => 75 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.7727NGSF9034SSNPT 3 => 90 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.8427NGSF11034SSNPT 3 1/2 => 110 mm 0.17 3/4" NPT 0.55 0.98 0.65 1.65 1.18 1.9627NGSF631SSNPT 2 => 63 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.2627NGSF751SSNPT 2 1/2 => 75 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1427NGSF901SSNPT 3 => 90 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.1827NGSF1101SSNPT 3 1/2 => 110 mm 0.21 1" NPT 0.66 1.26 0.84 2.13 1.46 2.27
L1
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncosa pollici\NI10158.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCOSA STUB FLANGE SOCKET FUSION
NI10158
1 2 0
ND
D2
D1
D
L1
L
CODE ND D1 D2 D L1 L27NCOSA32 1 => 32 mm 1.10 1.60 2.01 0.71 1.0227NCOSA40 1 1/4 => 40 mm 1.42 1.95 2.52 0.81 1.1827NCOSA50 1 1/2 => 50 mm 1.83 2.40 2.88 0.93 1.3427NCOSA63 2 => 63 mm 2.22 2.99 3.56 1.08 1.5027NCOSA75 2 1/2 => 75 mm 2.80 3.54 4.11 1.18 1.65
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nme pollici\NI10164.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NME ELECTROFUSION COUPLINGS
NI10164
1 1 0
CODE ND L1 L H D27NME20 1/2 => 20 mm 1.34 2.76 2.05 1.3027NME25 3/4 => 25 mm 1.34 2.76 2.28 1.5227NME32 1 => 32 mm 1.34 2.76 2.56 1.7927NME40 1 1/4 => 40 mm 1.61 3.35 2.95 2.1727NME50 1 1/2 => 50 mm 1.67 3.47 3.43 2.6827NME63 2 => 63 mm 1.67 3.86 3.94 3.2327NME75 2 1/2 => 75 mm 2.40 4.92 4.49 3.8627NME90 3 => 90 mm 2.84 5.75 5.12 4.4527NME110 3 1/2 => 110 mm 3.03 6.10 5.67 5.3527NME125 4 => 125 mm 3.23 6.54 6.58 6.1627NME160 6 => 160 mm 3.41 6.89 7.93 7.4827NME200 8 => 200 mm 3.60 7.28 9.57 9.1327NME250 10 => 250 mm 4.17 8.35 11.81 11.6527NME315 12 => 315 mm 4.72 9.45 14.69 14.67
ND
L1
L
H
D
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrde pollici\NI10201.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRDE ELECTROFUSION REDUCER
NI10201
2 2 0
CODE ND1 ND2 D L1 L2 L3 L H27NRDE4032 1 1/4=> 40 mm 1 => 32 mm 2.17 1.85 1.65 - 3.74 2.9127NRDE5032 1 1/2 => 50 mm 1 => 32 mm 2.52 1.95 1.63 - 3.94 3.3527NRDE5040 1 1/2 => 50 mm 1 1/4=> 40 mm 2.52 1.95 1.87 - 4.06 3.3527NRDE6332 2 => 63 mm 1 => 32 mm 3.21 2.19 1.65 - 4.65 3.9027NRDE6340 2 => 63 mm 1 1/4=> 40 mm 3.21 2.17 1.77 - 4.65 3.9027NRDE6350 2 => 63 mm 1 1/2 => 50 mm 3.21 2.19 1.97 - 4.65 3.9027NRDE7563 2 1/2 => 75 mm 2 => 63 mm 3.82 2.36 2.24 - 4.92 4.4927NRDE9063 3 => 90 mm 2 => 63 mm 4.53 2.68 2.44 - 5.91 5.1627NRDE1163 3 1/2 => 110 mm 2 => 63 mm 5.31 2.85 2.48 - 6.30 5.9327NRDE1190 3 1/2 => 110 mm 3 => 90 mm 5.31 2.87 2.70 - 6.22 5.93
ND
1
ND
2
D
H
L1 L2
L
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ngem pollici\NI10161.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NGEM ELECTROFUSION 90° ELBOW
NI10161
1 1 -1
CODE ND L1 L2 L H27NGEM20 (A) 1/2 => 20 mm 1.34 1.99 2.05 3.7627NGEM25 (A) 3/4 => 25 mm 1.46 2.13 2.24 4.0227NGEM32 (B) 1 => 32 mm 1.34 2.26 2.52 3.1527NGEM40 (B) 1 1/4 => 40 mm 1.61 2.56 2.87 3.6027NGEM50 (B) 1 1/2 => 50 mm 1.89 3.03 3.31 4.3127NGEM63 (B) 2 => 63 mm 2.09 3.46 3.94 5.0827NGEM75 (B) 2 1/2 => 75 mm 2.28 3.82 4.33 5.5927NGEM90 (B) 3 => 90 mm 3.07 4.69 5.24 6.9327NGEM110 (B) 3 1/2 => 110 mm 3.27 5.67 6.46 8.43
TYPE A TYPE B
TYPE A
TYPE B
L1L2
DN
L
H ND
L1L2
L
H
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncem pollici\NI10162.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCEM ELECTROFUSION 45° ELBOW
NI10162
1 1 -1
CODE ND L1 L2 L H27NCEM32 1 => 32 mm 1.41 1.83 2.54 3.7027NCEM40 1 1/4 => 40 mm 1.61 2.11 2.95 4.2927NCEM50 1 1/2 => 50 mm 1.89 2.46 3.27 5.0427NCEM63 2 => 63 mm 2.09 2.68 3.94 5.7927NCEM75 2 1/2 => 75 mm 2.36 3.19 4.45 6.6527NCEM90 3 => 90 mm 2.76 3.90 5.28 8.1927NCEM110 3 1/2 => 110 mm 3.27 4.49 6.36 9.49
ND
L1L2
L
H
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ntce pollici\NI10200.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NTCE SINGLE-WIRE ELECTROFUSION
EQUAL TEE WITH SPIGOT END NI10200
1 1 0
ND
1
L2
LL1
SND2
HH
1
L3
CODE ND1 ND2 S D L1 L2 L3 L H1 H27NTCE020 1/2 => 20 mm 1/2 => 20 mm 0.12 1.26 1.48 1.81 2.05 1.77 2.62 3.2727NTCE025 3/4 => 25 mm 3/4 => 25 mm 0.12 1.46 1.48 1.81 2.24 1.97 2.70 3.4327NTCE032 1 => 32 mm 1 => 32 mm 0.12 1.73 1.48 1.85 2.52 2.17 2.95 3.8027NTCE040 1 1/4 => 40 mm 1 1/4 => 40 mm 0.15 2.13 1.73 2.13 2.91 2.62 3.31 4.3727NTCE050 1 1/2 => 50 mm 1 1/2 => 50 mm 0.18 2.56 1.83 2.40 3.35 3.01 3.94 5.2627NTCE063 2 => 63 mm 2 => 63 mm 0.23 3.15 2.24 2.68 3.90 3.54 4.53 6.1427NTCE075 2 1/2 => 75 mm 2 1/2 => 75 mm 0.27 3.74 2.28 2.83 4.41 3.86 5.12 7.0127NTCE110 3 1/2 => 110 mm 3 1/2 => 110 mm 0.39 5.47 3.27 3.48 6.16 5.67 6.97 9.7227NTCE160 6 => 160 mm 6 => 160 mm 0.57 7.48 3.42 4.13 7.93 5.94 8.19 11.93
D
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkman pollici\NI10214.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NKMAN COUPLER - COMPRESSION FITTINGS
NI10214
1 1 -1
ND
L
L1
H
CODE ND L1 L H03NKMAN20 1/2 => 20 mm 2.07 4.69 1.7703NKMAN25 3/4 => 25 mm 2.15 4.69 2.0903NKMAN32 1 => 32 mm 2.46 5.43 2.5403NKMAN40 1 1/4 => 40 mm 3.15 6.59 3.2903NKMAN50 1 1/2 => 50 mm 3.54 7.24 3.7803NKMAN63 2 => 63 mm 4.33 8.84 4.4503NKMAN75 2 1/2 => 75 mm 4.76 9.69 5.2003NKMAN90 3 => 90 mm 5.67 11.73 5.9303NKMAN110 3 1/2 => 110 mm 6.91 14.33 6.97
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkg pollici\NI10216.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NKG 90° ELBOW - COMPRESSION FITTINGS
NI10216
1 1 -1
ND
L1
H1
H
L
CODE ND L1 L H1 H03NKG20 1/2 => 20 mm 2.07 3.68 2.72 3.6803NKG25 3/4 => 25 mm 2.15 3.94 2.87 3.9403NKG32 1 => 32 mm 2.46 4.72 3.39 4.7203NKG40 1 1/4 => 40 mm 3.15 5.98 4.29 5.9803NKG50 1 1/2 => 50 mm 3.54 6.61 4.80 6.6103NKG63 2 => 63 mm 4.33 7.91 5.79 7.9103NKG75 2 1/2 => 75 mm 4.76 9.29 6.69 9.2903NKG90 3 => 90 mm 5.67 11.10 8.15 11.1003NKG110 3 1/2 => 110 mm 6.91 13.05 9.57 13.05
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkr pollici\NI10215.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NKR REDUCER - COMPRESSION FITTINGS
NI10215
1 1 -1
L
L1 L2
ND
1
ND
2
H
CODE ND1 ND2 L1 L2 L H03NKR2520 3/4 => 25 mm 1/2 => 20 mm 2.15 2.07 4.37 2.0903NKR3220 1 => 32 mm 1/2 => 20 mm 62,5 2.07 5.06 2.5403NKR3225 1 => 32 mm 3/4 => 25 mm 62,5 2.15 5.08 2.5403NKR4025 1 1/4 => 40 mm 3/4 => 25 mm 3.15 2.15 5.71 3.2903NKR4032 1 1/4 => 40 mm 1 => 32 mm 3.15 2.46 5.71 3.2903NKR5032 1 1/2 => 50 mm 1 => 32 mm 3.54 2.46 6.42 3.7803NKR5040 1 1/2 => 50 mm 1 1/4 => 40 mm 3.54 3.15 6.30 3.7803NKR6332 2 => 63 mm 1 => 32 mm 4.33 2.46 7.36 4.4503NKR6340 2 => 63 mm 1 1/4 => 40 mm 4.33 3.15 8.03 4.4503NKR6350 2 => 63 mm 1 1/2 => 50 mm 4.33 3.54 8.98 4.4503NKR7550 2 1/2 => 75 mm 1 1/2 => 50 mm 4.76 3.54 9.00 5.2003NKR7563 2 1/2 => 75 mm 2 => 63 mm 4.76 4.33 9.17 5.2003NKR9063 3 => 90 mm 2 => 63 mm 5.67 4.33 10.02 5.9803NKR9075 3 => 90 mm 2 1/2 => 75 mm 5.67 4.76 11.44 5.9803NKR11090 3 1/2 => 110 mm 3 => 90 mm 6.91 5.67 13.01 7.13
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\COMPRESSIONE\Nkt pollici\NI10217.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NKT 90° TEE - COMPRESSION FITTINGS
NI10217
1 1 -1
ND
L
L2
H1
H
L1
CODE ND L1 L2 L H1 H03NKT20 1/2 => 20 mm 2.07 2.68 5.35 2.68 3.6003NKT25 3/4 => 25 mm 2.15 2.87 5.75 2.87 3.8603NKT32 1 => 32 mm 2.46 3.43 6.85 3.43 4.6503NKT40 1 1/4 => 40 mm 3.15 4.25 8.50 4.25 5.9803NKT50 1 1/2 => 50 mm 3.54 4.80 9.61 4.80 6.8903NKT63 2 => 63 mm 4.33 5.71 11.42 5.71 7.7603NKT75 2 1/2 => 75 mm 4.76 6.61 13.23 6.61 9.2103NKT90 3 => 90 mm 5.67 8.15 16.30 8.15 11.0803NKT110 3 1/2 => 110 mm 6.91 9.61 19.21 9.61 13.09
PRODUCT RANGE
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nbrf pollici\NI10150.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NBRF ALL-PLASTIC UNIONS WITH SOCKET
FUSION ENDS NI10150
1 1 0
ND
1
ND
2
D1 D
L1 L2
L
CODE ND1 ND2 D1 D L1 L2 L27NBRF20 1/2 => 20 mm 1/2 => 20 mm 0.55 2.09 0.79 0.79 2.8727NBRF25 3/4 => 25 mm 3/4 => 25 mm 0.71 2.24 0.79 0.79 2.7627NBRF32 1 => 32 mm 1 => 32 mm 0.95 2.64 0.79 0.79 2.7627NBRF40 1 1/4 => 40 mm 1 1/4 => 40 mm 1.14 3.03 0.79 0.79 2.76
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrff11_NPT pollici SDR11\NI10283.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFF11_NPT
FEMALE THREADED ADAPTER W/NPT LEAD FREE BRASS SDR11 NI10283
1 1 0
CH
L1L
ND D
CODE ND S Thread LTh. min D1 D L1 L CH LCH27NRFF112012NPT 1/2"=>20 mm 0.12 1/2" NPT 0.67 0.51 1.46 1.73 3.31 0.98 0.4327NRFF112534NPT 3/4"=>25 mm 0.12 3/4" NPT 0.71 0.71 1.61 1.73 3.39 1.18 0.4727NRFF11321NPT 1"=>32 mm 0.12 1" NPT 0.83 0.94 1.97 1.89 3.58 1.50 0.5127NRFF11401NPT 1"1/4=>40 mm 0.15 1" NPT 0.83 0.94 1.97 2.09 3.74 1.50 0.5127NRFF1150112NPT 1"1/2=>50 mm 0.18 1 1/2" NPT 0.75 1.50 2.76 2.40 4.25 2.17 0.5927NRFF11632NPT 2"=>63 mm 0.23 2" NPT 0.93 1.93 3.31 2.72 4.80 2.56 0.7927NRFF1175212NPT 2"1/2=75 mm 0.27 2 1/2" NPT 1.19 2.36 4.21 2.99 5.43 3.15 0.9827NRFF11903NPT 3"=>90 mm 0.32 3" NPT 1.31 2.80 4.69 3.43 6.02 3.74 0.9427NRFF111104NPT 4"=>110 mm 0.39 4" NPT 1.55 3.54 5.98 3.35 6.50 4.72 1.1827NRFF111254NPT 5"=>125 mm 0.45 4" NPT 1.55 3.90 6.02 3.74 6.97 4.72 1.18
S
LTh. min
Thre
adD
1
LCH
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrfm11_NPT pollici SDR11\NI10282.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFM11_NPT
MALE THREADED ADAPTER W/NPT LEAD FREE BRASS SDR11 NB10077
1 1 0
L1LTh. min
LCH
L
CH
CODE ND S Thread LTh. min D1 D L1 L CH LCH27NRFM112012NPT 1/2"=>20 mm 0.12 1/2" NPT 0.52 0.51 1.42 1.73 3.94 0.87 0.4327NRFM112534NPT 3/4"=>25 mm 0.12 3/4" NPT 0.57 0.71 1.61 1.73 4.06 1.06 0.4727NRFM113234NPT 1"=>32 mm 0.12 3/4" NPT 0.57 0.71 1.61 1.85 4.06 1.06 0.4727NRFM11321NPT 1"=>32 mm 0.12 1" NPT 0.66 0.94 1.97 1.89 4.33 1.34 0.5127NRFM11401NPT 1"1/4=>40 mm 0.15 1" NPT 0.66 0.94 1.97 2.17 4.53 1.34 0.5127NRFM1140114NPT 1"1/4=>40 mm 0.15 1 1/4" NPT 0.75 1.22 2.48 2.09 4.88 1.65 0.5927NRFM1150112NPT 1"1/2=>50 mm 0.18 1 1/2" NPT 0.75 1.50 2.76 2.40 5.16 1.97 0.5927NRFM11502NPT 1"1/2=>50 mm 0.18 2" NPT 0.92 1.50 3.27 2.40 5.51 2.36 0.7127NRFM11632NPT 2"=>63 mm 0.23 2" NPT 0.92 1.93 3.27 2.72 5.79 2.36 0.7127NRFM1175212NPT 2"1/2=75 mm 0.27 2 1/2" NPT 1.05 2.36 4.21 3.15 6.42 3.15 0.7927NRFM11903NPT 3"=>90 mm 0.32 3" NPT 1.17 2.80 4.65 3.43 7.20 3.54 0.9127NRFM111104NPT 4"=>110 mm 0.39 4" NPT 1.41 3.54 6.02 3.35 7.95 4.53 1.1827NRFM111254NPT 5"=>125 mm 0.45 4" NPT 1.41 3.90 6.02 3.74 8.43 4.53 1.18
SD1
Thre
ad
ND D
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrv_ss pollici\NI10244.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRV_SS VICTAULIC ADAPTER STAINLESS
STEEL - LONG SPIGOT - SDR11 NI10244
1 1 0
S
D
Thre
ad
LTh. min L1
L
CODE ND S Thread L Thread min L1 L D27NRV6311SS 2" => 63 mm 0.23 2" 1.18 2.72 5.24 3.2727NRV9011SS 3" => 90 mm 0.32 3" 1.18 3.43 6.26 4.6527NRV11011SS 4" => 110 mm 0.39 4" 1.57 3.35 6.89 6.02
ND
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Npr\NB10081.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NPR RACCORDO CON ATTACCO PEX
NB10081
1 1 0
Dn
LL1
CD
CODE Dn C LC D L1 L27NPR1220 20 1/2" 18,5 37 16 4027NPR1225 25 1/2" 18,5 37 17 4127NPR3425 25 3/4" 24,5 42 17 4627NPR132 32 1" 30,5 54 20 52
LC
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncsj pollici\NI10230.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCSJ UNION W/STANDARD BRASS NUTS
AND SOCKET ENDS NI10230
1 1 0
L1
ND
D1
L
CH
1
CH
2
CODE ND D1 L1 L CH1 CH227NCSJ2020 1/2" - 1/2" => 20-20 mm 0.59 0.55 3.11 1.18 1.8127NCSJ2525 3/4" - 3/4" => 25-25 mm 0.75 0.63 3.35 1.50 2.0527NCSJ3232 1" - 1" => 32-32 mm 1.02 0.71 4.17 1.97 2.6827NCSJ4040 1" 1/4 - 1" 1/4 => 40-40 mm 1.30 0.87 4.72 2.12 3.1527NCSJ5050 1" 1/2 - 1" 1/2 => 50-50 mm 1.69 0.94 5.12 2.79 3.8227NCSJ6363 2" - 2" => 63-63 mm 2.05 1.10 6.02 3.15 4.29
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Npgs pollici\NI10284.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NPGS PEX ADAPTER (CRIMP) FUSION
WELDING SADDLE NI10284
1 1 0
ND
D1 DC
L1
L
CODE ND C D1 D L1 L27NPGS124050 1" 1/4 => 40 mm
1" 1/2 => 50 mm 1/2" 0.98 1.46 1.24 1.77
27NPGS126375 2" => 63 mm2" 1/2 => 75 mm 1/2" 0.98 1.46 1.24 1.65
27NPGS12901101253" => 90 mm4" => 110 mm5" => 125 mm
1/2" 0.98 1.46 1.24 1.61
27NPGS344050 1" 1/4 => 40 mm1" 1/2 => 50 mm 3/4" 0.98 1.65 1.32 1.85
27NPGS346375 2" => 63 mm2" 1/2 => 75 mm 3/4" 0.98 1.65 1.32 1.73
27NPGS34901101253" => 90 mm4" => 110 mm5" => 125 mm
3/4" 0.98 1.65 1.32 1.69
27NPGS16375 2" => 63 mm2" 1/2 => 75 mm 1" 1.26 2.13 1.50 2.05
27NPGS1901101253" => 90 mm4" => 110 mm5" => 125 mm
1" 1.26 2.13 1.50 1.97
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncc pollici\NI10149.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCC END CAP SOCKET FUSION
NI10149
1 1 0
ND
D
L1L
S
CODE ND S D L1 L27NCC20 1/2 => 20 mm 0.13 1.18 0.67 1.1427NCC25 3/4 => 25 mm 0.17 1.40 0.71 1.3427NCC32 1 => 32 mm 0.21 1.77 0.79 1.5827NCC40 1 1/4 => 40 mm 0.26 2.13 0.87 1.6527NCC50 1 1/2 => 50 mm 0.33 2.60 1.00 1.8927NCC63 2 => 63 mm 0.41 3.27 1.34 2.2127NCC75 2 1/2 => 75 mm 0.49 3.90 1.69 2.4027NCC90 3 => 90 mm 0.59 4.69 1.34 2.6827NCC110 3 1/2 => 110 mm 0.72 5.79 1.46 3.1127NCC125 4 => 125 mm 0.82 6.38 1.58 3.43
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncc_11M pollici - SDR 11\NI10219.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCC_11M
END CAP - LONG SPIGOTSDR 11 NI10219
1 1 -1
CODE ND S L1 L27NCC6311M 2" => 63 mm 0.23 2.76 3.4327NCC7511M 2" 1/2 => 75 mm 0.27 2.95 3.7427NCC9011M 3" => 90 mm 0.32 3.19 4.1327NCC11011M 4" => 110 mm 0.39 3.54 4.6927NCC12511M 5" => 125 mm 0.45 3.74 5.0427NCC16011M 6" => 160 mm 0.58 4.25 5.5927NCC20011M 8" => 200 mm 0.72 5.24 6.77
L1
L
SN
D
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Ncc_11MS pollici - SDR 11\NI10225.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCC_11MS
END CAP - SHORT SPIGOTSDR 11 NI10225
1 1 -1
CODE ND S L27NCC25011MS 10" => 250 mm 0.89 1.9727NCC31511MS 12" => 315 mm 1.13 1.9727NCC35511MS 14" => 355 mm 1.27 3.1527NCC40011MS 16" => 400 mm 1.43 3.1527NCC45011MS 18" => 450 mm 1.61 3.1527NCC50011MS 20" => 500 mm 1.79 3.1527NCC56011MS 22" => 560 mm 2.00 3.1527NCC63011MS 24" => 630 mm 2.25 3.15
ND
S
L
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Flaacpp pollici\NI10199.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.FLAACPP PP ENCAPSULATED BACKING RING
ANSI/ASA 150 NI10199
1 2 -2
T
hole
s
PC
DIDOD
CODE ND (PP) OD ID PCD T holes N° holes00FLAACPP321 1" => 32 mm 4.25 1.73 3.13 0.63 0.63 400FLAACPP40114 1" 1/4 => 40 mm 4.61 2.05 3.50 0.63 0.63 400FLAACPP50112 1" 1/2 => 50 mm 5.00 2.44 3.88 0.71 0.63 400FLAACPP632 2" => 63 mm 5.98 3.07 4.74 0.71 0.79 400FLAACPP75212 2" 1/2 => 75 mm 7.01 3.62 5.49 0.71 0.79 400FLAACPP903 3" => 90 mm 7.52 4.33 5.98 0.79 0.79 400FLAACPP1104 4" => 110 mm 9.02 5.24 7.50 0.79 0.79 800FLAACPP1255 5" => 125 mm 10.00 5.83 8.50 0.79 0.91 800FLAACPP1606 6" => 160 mm 10.98 7.01 9.49 1.02 0.91 800FLAACPP2008 8" => 200 mm 10.98 9.25 11.75 1.02 0.91 800FLAACPP25010 10" => 250 mm 15.98 11.42 14.25 1.18 1.02 12
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Nprcr\NB10091.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NPRCR PEX ADAPTER (CRIMP RING - ASTM F
1807) WITH SOCKET FUSION ENDS NB10091
1 1 0
DnD C
LC
L1
L
CODE Dn C LC D L1 L27NPRCR1220 20 1/2" 21 37 16 4027NPRCR1225 25 1/2" 21 37 17 4127NPRCR3425 25 3/4" 22 42 17 4627NPRCR132 32 1" 27 54 20 52
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncua_L\NB10090.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCUA_L COPPER ADAPTER WITH SOCKET
FUSION ENDS NB10090
1 1 0
L1
Dn1D
Dn2
CODE Dn1 Dn2 D L1 L27NCUA12C20L 20 1/2" CTS 37 16 5727NCUA34C25L 25 3/4" CTS 42 17 6327NCUA1C32L 32 1" CTS 54 20 76
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncut_L\NB10092.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCUT_L COPPER STUB OUT TRANSITION
FITTING WITH SOCKET END NB10092
1 1 0
DD
n1
L1
CODE Dn1 Dn2 D L127NCUT12C20L 20 1/2" CTS 37 1627NCUT34C25L 25 3/4" CTS 42 1727NCUT1C32L 32 1" CTS 54 20
Dn2
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncutc_L\NB10093.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCUTC_L COPPER STUB OUT ELBOW
TRANSITION FITTING WITH SOCKET FUSION ENDS
NB10093
1 1 0
CODE Dn1 Dn2 D L127NCUTC12C20L 20 1/2" CTS 37 1627NCUTC34C25L 25 3/4" CTS 42 1727NCUTC1C32L 32 1" CTS 54 20
ND2
L1
DND1
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Npgscr\NB10094.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NPGSCR INSTAHEADER PEX ADAPTER (CRIMP
RING - ASTM F 1807) FUSION WELDING SOCKLET
NB10094
1 1 0
D1
Dn
C D
L
L1
CODE Dn C D1 D L1 L27NPGSCR124050 40-50 1/2" 25 37 31,5 4527NPGSCR126375 63-75 1/2" 25 37 31,5 4227NPGSCR1290110125 90-110-125 1/2" 25 37 31,5 4127NPGSCR344050 40-50 3/4" 25 42 33,5 4727NPGSCR346375 63-75 3/4" 25 42 33,5 4427NPGSCR3490110125 90-110-125 3/4" 25 42 33,5 4327NPGSCR16375 63-75 1" 32 54 38 5227NPGSCR190110125 90-110-125 1" 32 54 38 50
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncrt_11 SDR11\NB10042.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCRT_11
STUB FLANGE - LONG SPIGOTSDR 11 PP-RCT
NB10042
1 1 0
CODE Dn S min D D1 L1 L2 L27NCRT3211 32 3,0 68 40 45 10 7827NCRT4011 40 3,7 78 50 63 11 9527NCRT5011 50 4,6 88 61 65 12 9627NCRT6311 63 5,8 102 75 75 14 11627NCRT7511 75 6,8 122 89 84 16 12227NCRT9011 90 8,2 133 105 100 17 154,527NCRT11011 110 10,0 158 125 98,5 18 15027NCRT12511 125 11,4 158 132 122 25 17827NCRT16011 160 14,6 212 175 105 25 18027NCRT20011 200 18,2 268 232 125 32 20027NCRT25011 250 22,7 320 285 132 35 20727NCRT31511 315 28,6 370 335 152 35 228
Dn D
S m
in
L2
L
L1
D1
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncol\NB10079.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCOL
COLLARE DI PRESA A TRONCHETTO CON CINGHIABRANCH SADDLE WITH BELT SDR11
NB10079
1 1 0
S minDn2
L1
L
H
Dn1
Max Hole
CODE Dn1 Dn2 S min L1 L H Max Hole27NCOL11025 110 25 3,0 65 140 100 1627NCOL12525 125 25 3,0 65 140 100 1627NCOL16025 160 25 3,0 65 140 100 16
27NCOL12532 125 32 3,0 65 140 100 22,527NCOL16032 160 32 3,0 65 140 100 22,527NCOL20032 200 32 3,0 65 140 100 22,527NCOL25032 250 32 3,0 65 140 100 22,527NCOL31532 315 32 3,0 65 140 100 22,5
27NCOL16063 160 63 5,8 65 140 100 4427NCOL20063 200 63 5,8 65 140 100 4427NCOL25063 250 63 5,8 65 140 100 4427NCOL31563 315 63 5,8 65 140 100 44
27NCOL16090 160 90 8,2 90 170 120 7027NCOL20090 200 90 8,2 90 170 120 7027NCOL25090 250 90 8,2 98 200 130 7027NCOL31590 315 90 8,2 98 200 130 70
27NCOL200110 200 110 10,0 98 200 130 8727NCOL250110 250 110 10,0 98 200 130 8727NCOL315110 315 110 10,0 98 200 130 87
27NCOL200125 200 125 11,4 98 200 130 10027NCOL250125 250 125 11,4 98 200 130 10027NCOL315125 315 125 11,4 98 200 130 100
www.nupiindustrieitaliane.com - info@nupinet.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron grigio BETA\Ncol\NB10078.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned excluding values as per standard EN ISO 15874 - ASTM F 2389 - NSF 14
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NCOL
BRANCH SADDLE WITH RIGID UNDER CLAMPCOLLARE DI PRESA A TRONCHETTO CON FONDO STAFFA RIGIDO SDR11
NB10078
1 2 0
CODE Dn1 Dn2 S min L1 L H Max Hole27NCOL4025 40 25 3,0 70 100 82 1627NCOL5025 50 25 3,0 70 100 82 1627NCOL6325 63 25 3,0 70 100 82 1627NCOL7525 75 25 3,0 70 100 82 1627NCOL9025 90 25 3,0 70 106 98 1827NCOL4032 40 32 3,0 70 100 82 22,527NCOL5032 50 32 3,0 70 100 82 22,527NCOL6332 63 32 3,0 70 100 82 22,527NCOL9032 90 32 3,0 75 106 98 2527NCOL11032 110 32 3,0 72,5 100 97 22,527NCOL07540 75 40 3,7 70 100 82 3027NCOL9063 90 63 5,8 82 140 100 4427NCOL11063 110 63 5,8 82 140 100 4427NCOL12563 125 63 5,8 82 140 100 44
S minDn2
L1 H
Dn1
Max Hole
L
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\POLLICI USA\Nrs_L pollici\NI10153.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRSL CONCEALED (EXTRACTABLE) BALL
VALVE W/LEAD FREE BRASS - SOCKET FUSION
NI10153
1 1 0
LL1
H
CODE ND D1 L1 L H1 H27NRSL20 1/2" => 20 mm 0.70 0.75 3.94 2.24 2.9127NRSL25 3/4" => 25 mm 0.70 0.75 3.94 2.24 2.9127NRSL32 1" => 32 mm 0.95 0.83 4.75 2.36 3.23
H1
ND
D1
Nupi Americas, Inc.
1511 Superior Way,Houston - TX 77039 - U.S.A.ph. +1 281 590 4471fax +1 281 590 5268
314 Commerce ParkwayEarly Branch - SC 29916 - U.S.A.ph. +1 803-398-3579fax: +1 803 398 3639
info@nupiamericas.com
www.nupiamericas.com