Post on 07-Apr-2022
Automation | Valves | Measurement | Process Control
POWERVUE™ MOTOR CONTROL CENTRES (MCC)
Accelerate project timelines through faster delivery and easy installation.
e: drives@spartancontrols.comt: +1 (403) 695-2340
www.spartancontrols.com
POWERVUE™ MOTOR CONTROL CENTRES
Spartan Control’s PowerVue™ Motor Control Centres (MCC) are designed to accelerate project timelines while reducing installation and commissioning costs associated with low voltage MCC projects. Our innovative assembly process provides flexibility to project managers, engineers, and electricians to ensure you get what you want when you want it.
Burnaby | Calgary | Edmonton | Fort McMurray | Fort St. John | Grande Prairie | Midale | Prince George | Regina | Saskatoon | Whitecourt
www.spartancontrols.com
Burnaby | Calgary | Edmonton | Fort McMurray | Fort St. John | Grande Prairie | Midale | Prince George | Regina | Saskatoon | Whitecourt
PowerVue™ Motor Control Centres
Reduced Start-up TimeSpartan PowerVue™ can be equipped with built-in DeltaV™ to significantly reduce site installation and commissioning time.
Reduced CostMultiple mounting options for electrical devices can reduce the overall cost of an MCC.
Increased SafetyProtect personnel and equipment by reducing arc flash risk with optional integral arc quenching technology.
Reduced FootprintCompact withdrawable buckets can reduce the overall size of an MCC.
Easy InstallationLarger wireways and quick connection features facilitate easy installation for electricians and staff.
Easy MaintenanceFully withdrawable options allow for a bucket to be changed in seconds without the use of any tools or manually disconnecting any cables.
For more information, please contact us!
drives@spartancontrols.com | + 1 (403) 695-2340©2019 Spartan Controls. All rights reserved.
Indoor Altitude m Comm Protocols CHARM I/O Ethernet/IP ModbusTCP
Ambient Temp. Min. °C Max. °C DeviceNET Profinet Profibus
Temp Rise Min. °C
Redundancy PRP
Enclosure Rating NEMA 1 NEMA 1A NEMA 12
Exterior Finish Interior Finish Control Voltage 120V 24V Other
Control Wiring #14 TEW (STD) #12 TEW Other
Access Front Only Rear Back to Back Wiring Class 1B 2C
Cable Entry Top Bottom Terminal Blocks
Standards
Type Drawout Full Drawout Fixed
Voltage 208 480 600 Disconnect Breakers Fusible Switch
System 3P3W 3P4W Contactors Electrical Held Mech Latched
Frequency 60Hz 50Hz Overloads Bimetallic Electronic
VFDs Yaskawa Other
Grounding HRG Solid Pilot Lights 22mm (STD) 30mm P-T-T
Aux Contacts Min. Max.
Amperage 400A 600A 800A
1200A 1600A 2000A
2500A 3000A 4000A Functional Options Shutters Bottom Plates
5000A Nameplates Lamacoids
Mounting Base Plinth
Phase Bus Copper Tinned Copper Transfer Switch Automatic Manual
Ground Bus Copper Tinned Copper
Insulation Fully Insulated
Bracing 25kA 42kA 65kA Control PK Controller
85kA 100kA Marshalling CHARMS I/O
Incoming MLO Switch Breaker
Bus Duct
Protection Ground Fault SPD Relay
Arc Quench
Metering PQM Delta Wye
Pull Apart
CSA C22.2 #254, UL845
-20 40
1000
Bus
65
General Ratings
PowerVue™ MCC Datasheet
RAL 7035 Galvanized
Buckets
2 6
Control
Incoming
Electrical Ratings
Accessories
DeltaV™ Options
s