Post on 08-Jan-2019
Tapper+® Xtreme
• The right choice: Windows and Door Frames
Exterior Fixtures
Hand Rails
Electrical Boxes
Hurricane Shutters
Screen Enclosures
Applications
Tapper+® Xtreme
Great for Retro-Fitting
Back out old screw No need to patch hole
Simply enlarge hole with Tapper+ Bit
Drive a new Tapper+ Xtreme
You’re Done!
Independent Code Approvals!
Tapper+® Xtreme
Code Approval
2012, 2009, 2006 and 2003 IBC & IRC ESR-3068
2010 Florida Building Code-Building & Residential
ESR-3068 FBC Supplement
Miami-Dade County Notice of Acceptance NOA12-1205.10
Tapper+® Xtreme
Beats The Competition
*Based on Manufacturer Published literature, 1-3/4” embedment
Powers 5/16" Tapper+
Xtreme
Powers 3/8" Tapper
Elco Ultracon
Hilti Quick Con II
Buildex Tapper XL
0
500
1000
1500
2000
2500
3000
Normalized Tension Load - 3,000 psi concrete
Load
(lbf
)
Tapper+® Xtreme
Superior Corrosion Resistance
When salt spray tested head to head against the ITW Tapcon® with the Climaseal coating the Powers Tapper+ PermaSeal® Coating outperformed the competition with no visible red rust.
POWERSTapconITW
• Approved for High Velocity Hurricane Zones (HVHZ)!
• Great for securing Hurricane shutters
•Superior load carrying capacity than traditional “blue screws”
• Powers’ Patented Perma-Seal® coating provides excellent corrosion resistance in extreme weather environments.
Tapper+® Xtreme
Hurricane Ready
Tapper+® XtremeProduct Demonstration
1. Using the included 5/16” Tapper+ SDS Bit, drill a hole into concrete.
2. With a #3 bit tip or 5/16” hex socket depending on head style mount the anchor into the socket
3. Drive the anchor with an impact wrench (max 115 ft-lbs.) Recommended DEWALT DCF895C2
4. After installation notice the on the head. The head diameter is the same size as the ¼” Tapper+.
Note the fast install time and minimal effort during installation due to the coarse thread.
Tapper+® Xtreme
DescriptionPowers 5/16"
Silver Tapper+ Xtreme
Buildex Tapper XL*
Hilti Quick Con II
Elco Ultracon
5/16x 1-3/4 Hex head 2200SD - 00433021 ELG4815/16x 2-1/4 Hex head 2202SD 3395902 / 3397902 00433022 ELG4865/16x 2 3/4 Hex head 2204SD 3398902 00433023 ELG4915/16x 3-1/4 Hex head 2206SD - 00433024 ELG501
5/16x 4 Hex Head 2208SD - 00433026 ELG5065/16x 5 Hexhead 2210SD - - ELG511
5/16x 2-1/4 Flat head 2212SD - 00433049 ELG9415/16x 2 3/4 Flat head 2214SD - 00433050 ELG9485/16x 3-1/4 Flat head 2216SD - 00433051 ELG960
5/16x 4 Flat Head 2218SD - 00433054 ELG979
5/16x 1-3/4 Trim Hex head 2230SD - - ELG4825/16x 2-1/4 Trim Hex head 2234SD - - ELG4875/16x 2 3/4 Trim Hex head 2236SD - - ELG492
5/16x 2-1/4 Trim Flat head 2242SD - - ELG8015/16x 2 3/4 Trim Flat head 2244SD - - ELG8315/16x 3-1/4 Trim Flat head 2248SD - - ELG861
*Only available inbutton head style
Competitive Part # Cross Reference
Tapper+® Xtreme
For Ordering Information Download the Brochure here: http://www.powers.com/pdfs/catalogs/49159_tapperplus_hi.pdf
Ordering Information
*Bronze available by special order
Tapper+® Xtreme
Installation Kit
Installation Kit Includes: #3 Philips Impact Power Bit 5/16” Impact Ready Nut Driver 5/16“ x 6” SDS+ Tapper+ Bit 5/16“ x 8” SDS+ Tapper+ Bit Robust Powers case
COMING
SOON!