Post on 21-Apr-2015
Product LineOverview
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Line Overview
PMX190c PMX380 PMX600 PMX1000 PMX1250 PMX1650
ListPrice $1,095 $1,340 $1,995 $2,645 $3,595 $4,795
OutputCurrent
12A 25A 40A 60A 80A 100A
Max.Capacity 3/16” 3/8” 5/8” 1” 1-1/8” 1-1/2”
DutyCycle 35% 35% 50% 40-50%* 40-60%* 40-60%*
Weight 43 lbs 55 lbs 47 lbs 83 lbs 96.6 lbs 128 lbs
Design Chopper Chopper Inverter BoostInverter
BoostInverter
BoostInverter
* Duty cycle voltage/phase dependent
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Patented Torch Technologies
• Contact Starting
• Nozzle Shielding
• HyLife™ Electrode (hafnium sizing)
• Coaxial-assist™ Jet Technology
• Safety Trigger
TorchTechnologies
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Contact Starting
• Initiates an arc between theelectrode and nozzle
• Eliminates damaging highfrequency that can harmsensitive electronic equipment
Patented TorchTechnologies
static pilot arc
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Nozzle Shielding
Electrically isolated nozzleshield offers two benefits:
1. Protects nozzle frommolten spatter duringcutting operations.
2. Minimizes potential fordouble arcing.
Patented TorchTechnologies
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Nozzle Shielding
3. Electrically isolated shieldallows torch to be incontact with the plateduring cutting operations.
• Drag cutting• Template tracing• Straight edge cutting
Patented TorchTechnologies
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
HyLife Electrode Technology
• Smaller cross-section ofHafnium insert material
• Increased cooling capacityof copper for longerelectrode life
Patented TorchTechnologies
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Coaxial-assist™ Jet Technology
• Manages gas flow for greater arcstability and optimized arc shape
• Higher cut speeds – up to 20%faster than conventional designs
Patented TorchTechnologies
A coaxial-assist jet design
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Safety Trigger
• Prevents accidental firing of torchfor enhanced operator safety
Patented TorchTechnologies
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Other Notable Torch Features
• Full one-year warranty
• Ergonomic clamshell handle
• Quick-disconnect
• ETR™ System(Easy Torch Removal)
TorchTechnologies
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Reliable Performance & Refined Architecture
• Power components withexcess operating margins
• Advanced circuitry todetect and protect againstpower problems
• Boost Conditioner™ circuit
• 3-year warranty
Power SupplyTechnologies
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Power Levels
kW Output – The true measure of cutting power
• Arc volts x amperage = kW output
3/16”
1.32 kW
PMX190c
3/8”
2.43
PMX380
16 kW12 kW8.4 kW5.6 kWkWOutput
1 1/2”1 1/8”1”5/8”MaximumCapacity
PMX1650PMX1250PMX1000PMX600
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Introduced: 2001
FirstSystem: Powermax1250
Goal: Continue to expand the Powermax lineand set the industry norm for price-performance value in the manual plasmacutting system market.
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
G3 Series: The third generation of plasma
• Auto-voltage™ input
• Active electronic pilot arc controllerw/deactivation switch
• Dual-Threshold Pilot™
• ETR™ (Easy Torch Removal) system
• Boost Conditioner™ circuit
• Standard CNC interface
• Multi-system consumables
• 3-year power supply warranty
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Auto-voltage™ input
• Input sensing allowsoperation on 200 to 600volts, 1- or 3-phase, withno manual rewiring
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Active electronic pilot arc controller
• Allows expanded metal cutting without retriggering
• Gouging mode allows for improved arc transfer,easier operation and faster metal removal
• Deactivation switchdisengages circuitwhen not neededeliminating excessiveconsumable damage
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Dual-threshold™ pilot circuit
Significantly reducesnozzle wear byboosting pilot currentprecisely when needed.
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
ETR™ (Easy Torch Removal) system
• Allows easy switchingbetween manual andmechanized torches
• Improved strain reliefintegrated in torch leadfor improved durability
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Boost Conditioner™ circuit
• Compensates for inputvoltage variations forconsistent performance.
Standard CNC interface
• Automated control and rapidchange over to mechanizedoperation
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Multi-system consumables
• Consumables available for 40/60/80/100A cutting
• Manual and mechanized consumables available
• Gouging consumables available in 60/80/100A
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Multi-system torches
• Torches are “downward compatible” only
Powermax1000Powermax1250Powermax1000Powermax1650Powermax1250Powermax1000
T100T80T60
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Full 3-year power supply warranty
• Designs anticipate industrialuse and tough operating environments
• Warranty covers entire powersupply, not just selectedcomponents
Superior Reliability
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
H.A.L.T. (Highly Accelerated Life Testing)
• Testing simulates the life ofthe system in lab conditions
• Exaggerates anticipated realworld use and abuse
• Ensures a more rugged andreliable product in the field
ExhaustiveTesting Protocol
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Clear PerformanceExpectations
Three-Category Rating System
• Clear description ofperformance on a giventhickness
• Makes it easier to match theright system to the job
• Excellent sales tool
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Clear PerformanceExpectations
Recommended Capacity
• Optimum system performance
• Cut speeds of at least 20 inchesper minute
• Ideal operating range
• Majority of cutting should bedone at this thickness anddown - 80% of the time
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Clear PerformanceExpectations
Maximum Capacity
• Strong performance
• Cut speeds of at least 10 inchesper minute
• Top end of satisfactoryoperational range for cut quality
• Not intended for more than20% of operating use
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Clear PerformanceExpectations
Severance Capacity
• Top-end of system’s capabilities
• Intended only for occasionalseverance requirements wherepoor cut quality is acceptable
• Slow cut speeds
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Capacity Ratings -Simplified
RecommendedCapacity:
>80%
MaximumCapacity:
<20%
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Other Capacity Ratings
Pierce CapacityTypically 1/2 of the maximumcapacity of a system
Production Capacity(or Mechanized Capacity)Typically 1/2 of the maximumcapacity due to the need to pierceduring mechanized cutting applications
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Performance
20 24
42
60
88
0102030405060708090
100
Oxyfuel PMX600 PMX1000 PMX1250 PMX1650
inch
esp
erm
inu
te
Maximum Speed on 1/2” Mild Steel
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
System Set-up
Before turning on the power
• Verify incoming voltage at source
• Connect torch to power supply
• Connect plasma gas (air) to power supply
• Verify proper consumables are in torch
• Attach work clamp to workpiece (plate)
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
System Set-up
Powering up the system
• Turn on the power supply
• Set gas pressure as prescribed in the manual
• Adjust output current
• Set pilot arc controller switch to the appropriateposition (if applicable)
• Begin cutting
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Plasma System Safety
Electric shock issues
• Operating a plasma cutting system completes an electricalcircuit. The workpiece is part of the circuit!
• Never touch the torch body or workpiece when the plasmasystems is operating.
• Do not touch any wet surface when using the plasma system.
• Do not move the work clamp during cutting operations.
• Always turn off the power supply before changingconsumables
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
Plasma System Safety
Eye and skin protection
• Plasma arc rays produceintense visible and invisiblerays that can burn eyes andskin.
• Always wear eye protection.
• Always wear gloves andflame-retardant clothing.
Arc Current AWS (USA)Up to 100 A No. 8 No. 11100-200 A No. 10 No. 11-12200-400 A No. 12 No. 13Over 400 A No. 14 No. 14
Lens ShadeISO 4850
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
• Advanced power supplytechnology for superiorreliability and protection
• Industry-leading torchtechnology for excellentconsumable life
• Contact start arc ignition
• No exclusions warranty
Selling Strategies
Copyright, 2005 Hypertherm, Inc.These materials cannot be reproduced in any formwithout the permission of Hypertherm, Inc.
A demonstrated commitment to technologyleadership, quality, and support make theHypertherm Powermax family of manualplasma cutting systems the first choiceof the true cutting professional.
The First Choice