Pop-up Headland

Post on 22-Apr-2015

17.211 views 0 download

description

 

Transcript of Pop-up Headland

http://www.flickr.com/photos/sacherfire/217113480/

Pop-up headland..

1

You need your template. This will represent a chalk

headland.

2

Using a blue crayon- shade the outside horizontal strips- these represent the sea.

3

Using a green crayon- shade the middle horizontal strip-

this represents the top of the headland- exposed to

weathering.

4 Just above the horizontal

blue lines- shade a grey line-

make sure it reaches the top

of the wave-cut notch. This

represents wave action

between high and low tide.

5

Carefully cut out all the black areas on the template- with the exception of the wave-

cut notch.

Don’t cut off your stump!

6

It should look like this...

7 Using a ruler, carefully fold the horizontal lines.

8Like this...

9 Glue along the two blue horizontal strips- on the reverse!

10

Position the green strip over the centre of your book. Gently glue down the blue horizontal strip- the one with the stump.- Practice your positioning first.

11

Carefully practice folding the

model... are the folds the

right way?

12Finally, glue the final blue strip down. Practice the

positioning first...

13 Gently close your book...

14

Magic...

1

2

3

4 5

6

Arty shot...

About the template...You could draw your own template or print this slide and use for the model.

The template should be A5 to fit into across a A4 exercise book- of course you could supersize the model.