Post on 27-May-2018
ASAHI/AMERICA
P.O. Box 653 - 35 Green Street, Malden, MA 02148 - Tel: (800) 343-3618, (781) 321-5409 Fax: (781) 321-4421 - Internet: http://www.asahi-america.com - Email: asahi@asahi-america.com
Polytetra/09 Rev A
Specifications
Material & PVDF DN200 Max OD: PP DN200 Halar (E-CTFE) DN150 PFA DN100 Surface Area: Up to 750 ft2 (70 m2) Length: Up to 197 in (5000 mm) PVDF, PP and ECTFE Up to 118 in (3000 mm) PFA
Polytetra Series shell and tube heat exchangers are specified and installed with confidence throughout the world. Designed specifically for each customer ensuring proper heat exchange rate. Available with both ends welded and one or both ends flanged for cleaning. Completely customizable end and top connections and top orientations. Offering the widest range of thermoplastic materials, Polytetra heat exchangers are the perfect solution for your specific cor-rosion resistant requirements.
Diverted Flow
www.asahi-america.com/Polytetra
Polytetra heat exchangers solve the problem of tube wear by preventing direct flow of the entering heating/cooling media onto the thin walled tubing for even flow throughout. Flow is diverted to the side of the shell avoiding possible high forces from damaging the thin wall internal tubes. This design also proves more efficient by spreading the initial contact of temperature control media to more than just a concentrated area.
Polytetra Series Shel l and Tube Heat Exchanger Thin wall tubing made from specially matched resins to fit Asahi Piping Systems Heating/Cooling media does not wear directly on process tubing High coefficient of heat transfer Custom designed to meet customer needs
Technical
ASAHI/AMERICA
P.O. Box 653 - 35 Green Street, Malden, MA 02148 - Tel: (800) 343-3618, (781) 321-5409 Fax: (781) 321-4421 - Internet: http://www.asahi-america.com - Email: asahi@asahi-america.com
Polytetra/09 Rev A
Customized Heat Exchangers Polytetra Product Offering
www.asahi-america.com/Polytetra
Modular Up to 3 modules in 4 different sizes up to 485 ft2 (45 m2)
Rectangle PFA coiled to customer specifications
Round Largest surface area at up to 150m2
Mini PTFE/PFA designs from 1ft2 to 27ft2 (.1m2 to 2.5m2)
Bundle Up to 20m2 in DN150mm bundles
Hook in Bundle PP & PVDF up to 30m2
inserts into flange on tank
Asahi Regulating Products
Inlet and outlet size, orientation and type can be designed to fit the most specific customer needs.
Asahi offers a complete product line of regulating products, perfect for controlling pressure prior to your critical heat exchangers. Consult your local representative for additional information.
Dual chamber system Shell & Tube vertical installation