Post on 19-Jul-2018
DN
0001
9531
- Is
sue
006
DN
0001
9531
- Is
sue
006
Dual Axis, Azimuth-Altitude Tracker
...the Gearless Tracker2007
2009
2011 2015
• T100 - Dual Axis Tracker• T120 - Dual Axis Tracker
• D150ATLAS - Dual Axis Tracker• D180ATLAS - Dual Axis Tracker
2016• TEMPO - Fixed PV Array
2013• D170EVO - Dual Axis Tracker• S140EVO - Single Axis Tracker• C140EVO - CPV Tracker
• POLO - Horrizontal Single Axis Tracker
• S80ATLAS - Sinlge Axis Tracker• T50 - Single Axis Tracker
INSTALLATION & OPERATIONREMOTE CONTROL AND MONITORINGThe D170EVO is equipped with an advanced
telemetry system which informs you of the
machinery operations in real time.
EASY INSTALLATIONThe installation of the D170EVO is quick and easy
with the highest degree of standardization (plug
& play). All work takes place in the field without
need of experts. The PV modules are easily fixed
on the tracker by using the MEGRIP clamp, which
has been designed exclusively by Mechatron for
that exact purpose.
QUALITYEach system operates independently and
undergoes many hours of operation testing
prior to delivery, in order to satisfy Mechatron’s
operating specifications.
FLEXIBILITYThe D170EVO comes in two variants:
� Variant A, can bear up to 100 PV modules
dimensioned 1×1,7 m, resulting 27 kWp
of installed power when using 270 Wp
modules.
� Variant B, can bear up to 86 PV modules
dimensioned 1×2 m, resulting 27,5 kWp
of installed power when using 320 Wp
modules.
DESIGNINSPIRATIONThe structure’s design principle is inspiredby the beetle’s exoskeleton, which exhibitssuperior strength to weight ratio. The structureis a combination of an elliptical tube designand a simple lattice structure that holds the PVmodules.
STRENGTHThe elliptical tube, provides significantlysuperior stiffness and strength compared tothe conventional frame designs of other trackermanufacturers.The lattice structure, that supports the PVmodules, is designed to lower the assembly timein the field, while providing high structural rigiditythat protects the PV modules from forces thatoccur on the underframe under extreme externalloads (wind, snow etc).
GEARLESS DRIVEThe zero-backlash hydraulic drive does not usegears or other means of mechanical transmission.The purely hydraulic drive allows for smoothmovement and operation. Also, due to thecontinuous slip capability under strong winds, thedrive mechanism is extremely robust and capableof surviving even hurricane conditions.
DESIGN FOR MANUFACTURINGWe have spent a great deal of time and resources to design products that can be easily manufacturedin any part of the world and we offer theopportunity to our clients to manufacture majorparts of the D170EVO themselves.
MAIN FEATURES � Type: Azimuth-altitude dual axis tracker � Motion Range: -270° to +270° azimuth, -1,5° to 60° al-
titude
MONITORING & CONTROL � Remote monitoring:
� Full, in real time through a web interface � Email reporting
� Remote control: Full, in real time through a web inter-face
� Controller type: Autonomous (each tracker has its own conrol unit)
� Tracking method: Open loop astronomical algorithm � Tracking accuracy: 2° � Sensor system: 3D inclinometer & magnetic compass � Backtracking ability: Yes � Weather station: Wind speed sensor
ENVIRONMENTAL CONDITIONS � Maximum wind speed during tracking:
� 60 km/h, 3 s gust � Maximum allowable wind speed in stow:
� 104 km/h, c0=1,2 within 1 km from sea � 140 km/h, flat terrain, open country
� Temperatures: � Operational: -20 °C to +70 °C � Survival: -40 °C to +85 °C
CONSTRUCTION � Designed to meet all the requirements of Eurocode 3 � Hot-dip galvanized steel elements
MOTION MECHANISM � Type: Hydraulic � Maintenance: annual inspection and greasing, oil and
filter change once every 3 years � Protection: Hydraulic parts sealed from the environ-
ment. Able to operate in desert and in any combina-tion of dust and moisture
� Power consumption: 80 kWh per year � Inherent overload protection: Gearless actuation � Backlash: 0 (zero backlash)
FOUNDATION � Concrete pile � Overground concrete gravitational base (ballast) � Underground concrete gravitational base (ballast)
PAYLOAD � Maximum mass supported: 5350 kg � Configuration: A rectangular shape frame with an
available surface of 170 m2 (17 m × 10 m) that can bear any type of PV modules without the use of third party mounting hardware
� PV modules per tracker: up to 30 kWp (estimated based on current PV modules technology)
SPECIFICATIONS SUMMARY
DIMENSIONING OVERVIEW (for Variant A)
Energy Production Comparison
Conventional bases �Mechatron Solar Tracker D170 evolution �
EXTRAORDINARY PERFORMANCEThe D170EVO uses an astronomical algorithm to find the position of the sun. This contributes to maximum solar radiation intake even when it’s cloudy and also helps the tracker to avoid unnecessary movements. This results in an overall better tracking quality and up to 45% greater energy production, ensuring greater benefit per unit of installed capacity in comparison to fixed systems.
DN
0001
9531
- Is
sue
006
WHO ARE WEWe are a company of innovation and creative synthesis.We blend the talent of our people in Mechanical engineering, Electronics and Informatics, to design products for
large scale systems, creating significant added value for the Investors, EPCs, our partners and ourselves.
OUR ACHIEVEMENTS UNTIL NOW: � More than 75 MWp of installed power
� More than 3500 installed solar trackers
� More than 850 active plants of various capacities (20 kWp to 2 MWp)
The information in this document is subject to change without notice and should not be construed as a commitment by Mechatron ABEE. Mechatron ABEE assumes no responsibility for: any errors that may appear in this document, to the accuracy, adequacy or reliability of any statements, estimates, diagrams or other information contained in this document.
DN
0001
9531
- Is
sue
006
www.mechatron.eu info@mechatron.eu+30 2810390850
I Street, Industrial Area, 71601, Heraklion, Greece
www.linkedin.com/company/mechatron
Our website:Our LinkedIn
Profile:Download the latest
version of this brochure
www.mechatron.eu http://mechatron.eu/cv78
NON-STOP DEVELOPMENTOur engineering team is committed to one task - designing the highest quality products and bringing them to the market on time. This requires continuous development and market research. We devote a great deal of time and resources to always stay relevant and be one step ahead of the market trends. This is evident in our product development timeline the past few years:
2007
2009
2011 2015
• T100 - Dual Axis Tracker• T120 - Dual Axis Tracker
• D150ATLAS - Dual Axis Tracker• D180ATLAS - Dual Axis Tracker
2016• TEMPO - Fixed PV Array
2013• D170EVO - Dual Axis Tracker• S140EVO - Single Axis Tracker• C140EVO - CPV Tracker
• POLO - Horrizontal Single Axis Tracker
• S80ATLAS - Sinlge Axis Tracker• T50 - Single Axis Tracker