Post on 27-Apr-2020
RUN SWAB PLANS REPORTS SETTINGS
PLAN
LOCATION
LIMIT
RESULT
SURFACE
OPERATOR1
OPERATOR2
MISC
PASS
OPERATOR1
NONE
FILLER NOZZLE
LINE 1
STAINLESS STEEL
0
1000
LOCATION
PLAN
SURFACE
MISC
OPERATOR1
OPERATOR2
LINE 1
TEST 1
STAINLESS STEEL
FILLER NOZZLE
OPERATOR1
NONE
LOCATION FILLER NOZZLE
LINE 1
LINE 2
LINE 3
RUN
RUN
RUN
PLANS RE-TEST
DELETE RE-TEST
BACK
659 Andover Street, Lawrence, MA 01843-1032, USAT +1.978.687.9200 | F +1.978.687.9216 | E info@charm.com | www.charm.com© 2016 Charm Sciences, Inc. Charm, novaLUM and PocketSwab are registered trademarks of Charm Sciences, Inc.
MRK-1056-001 May-2016
Select RUN.
Note: Swabs can be held for up to 6 hours at room temperature before act ivat ion.
Select PLANS button.
1
Select PLANS.
PocketSwab® Procedural Flow Chart
Refer to Current Charm ® Operator’s Manual for Complete Test Procedure
Withdraw the swab by gently pul l ing andtwist ing the swab handle.
Use Left ( )or Right ( ) arrows to pick location or use List View ( ) to scrol l to f ind correct location.
Swab an area 100 cm2 (16 in2). Rotatethe handle to achieve ful l swab contactwith surface.
Reinsert the swab and twist the handledown. Gently shake side to side 3 t imes.White tablet wi l l break apart.
Insert the PocketSwab Plus swab ful ly into the chamber of the novaLUM® II system in an upright posit ion. Press to start count.
Results in 5 seconds. The result of “Pass”or “Fai l” is based on establ ished l imit.
2 3
5 6
8
4
7 9
PLAN
SURFACE
MISC
OPERATOR1
OPERATOR2
LINE 1
TEST 1
STAINLESS STEEL
OPERATOR1
NONE
Refer to Current Charm® Operator’s Manual for Complete Test Procedure