PNEUMATIC CONVEYING

DEDUSTIG

VENTING

RAYMAN spol. s r. o. www.rayman.cz___________________________________________________________________________

More information you can learn on our web site www.rayman.cz

___________________________________________________________________________

RAYMAN spol. s r. o. » company seat: Ocelárenská 1781, 272 01 Kladno, Czech Republictel.: +420 312 247 252 fax: +420 312 247 621 e-mail: rayman@rayman.cz

RAYMAN spol. s r. o. » technical office: Nádražní 688, 399 01 Milevsko, Czech RepublicTel.: +420 382 522 115 fax: +420 382 522 117 e-mail: petr.rayman@rayman.cz

FILTER FH

Filters FH are used to catch solid dust adulterant

from floating media of exhausted sources of

dustiness. Filters are determined to use anywhere

where is needed to separate dry non- adhesive and

non-explosive dust from air. Filter consists of an

outlet (clean) chamber with a control cover and a

distributer of regeneration air, of filter case with a

filter cartridge and according to design of a hopper

with an emptying device and a supporting

construction. Filter cartridges are during operations

in sequence regenerated. This regeneration is made

by pulse of pressurized air led into each cartridge that evokes flow through filter cloth in

opposite direction than at normal operating. Part of filter is also a wiring system and an

electronic control.

Filter FH

Figure description:1. Filter body2. Inlet chamber with cover3. Hopper4. Cartridge5. Regenerating air distributor6. Emptying device (out of delivery scope)7. Control system and electric instalation

Filtration surface: from 6,4 to 68,8 m2

For detailed technical data see manual RK 12 1580.