Post on 02-Mar-2018
MAKES MOVINGMAKES MOVING
PLASTIC CHAINS
magris prides itself on nearly fifty years of experience asone of the leader manufacturer of hinged slat chains andaccessories in steel/stainless steel and thermoplastic resinfor conveyor belts used in packaging, bottling, glass,pharmaceutical, chemical, food, mechanical industry, etc.Nowadays, the magris team continues this activityexporting all over the world through a qualified networkof agents and distributors and also a short delivery timeis granted through a warehouse containing large quantitiesof the most required items (up to 1.000 metres each chaintype); non-stock and tailor-made orders can be supplied inshort term.The choice of chain materials has been specifically studiedby skilled specialists and developed in cooperation withthe main stainless steel and thermoplastic manufacturers,as far as the final performance is granted by chain testswhich strictly conform to international regulations, e.g.careful inspections carried out during all the stages ofproduction, whose quality is constantly supported bytechnological researches.magris production range for conveyor belts includes:- Steel/stainless steel hinged slat chains;- Thermoplastic hinged slat chains;- Sprockets and idlers, curves, guide rails profiles,
accessories and components in thermoplastic resin.
1
Materials
Thermoplastic straight running chains - SH820 SERIES
Thermoplastic straight running chains - SH831 SERIES
Thermoplastic straight running chains - SRH8257 SERIES
Thermoplastic straight running chains - DH821 SERIES
Thermoplastic sideflexing chains879 SERIES
Thermoplastic sideflexing chains880 SERIES
Thermoplastic sideflexing chains880 TAB SERIES
Thermoplastic sideflexing chains880 BO SERIES
Thermoplastic sideflexing chains879 TAB SERIES
Thermoplastic sideflexing chains879 BO SERIES
Thermoplastic sideflexing chains878 BO SERIES
Thermoplastic sideflexing chains onmagnetic tracks880 M SERIES
Thermoplastic sideflexing chains onmagnetic tracks882 M SERIES
Thermoplastic sideflexing chains882 SERIES
Thermoplastic sideflexing chains780 TAB SERIES
Thermoplastic sideflexing chains882 TAB SERIES
Thermoplastic sideflexing chains onmagnetic tracks780 M SERIESThermoplastic sideflexing chains onmagnetic tracks790 M SERIES
Thermoplastic sideflexing chains790 TAB SERIES
Thermoplastic sideflexing chains onmagnetic tracks780 MFG SERIES
Thermoplastic sideflexing chains onmagnetic tracks879 M SERIES
Vacuum thermoplastic straight running chains820 VACUUM SERIES
Vacuum thermoplastic sideflexing chains880 TAB VACUUM SERIES
Straight running chains with thermoplastictop plates845 SERIES
33343536363737383940414243444444454646474748484949505152
269
10111213131416171718191920212223242526272829303132
Straight running chains with thermoplastictop plates843 SERIES
Straight running chains with thermoplastictop plates863 SERIESStraight running chains with thermoplastictop plates863 TAB SERIESStraight running chains with thermoplastictop plates963 SERIES1843 Sideflexing chains with thermoplastictop plates1843 TAB SERIES1863 Sideflexing chains with thermoplastictop plates1863 TAB SERIES1873 Sideflexing chains with thermoplastictop plates1873 TAB SERIESThermoplastic straight running chainswith rubber inserts - Single HingeHFL 820 SERIESThermoplastic straight running chainswith rubber inserts - Double HingeHFL 821 SERIESThermoplastic sideflexing chainswith rubber insertsHFL 880 TAB SERIESThermoplastic sideflexing chainswith rubber insertsHFL 880 BO SERIESThermoplastic sideflexing chainswith rubber insertsHFL 878 BO SERIESThermoplastic sideflexing chainswith rubber insertsHFL 882 TAB SERIES1873 Sideflexing chains with thermoplastictop plates and rubber insertsHFL 1873 TAB SERIES
Biplanar thermoplastic chains1700 SERIES
Biplanar thermoplastic chains1700 TAB SERIES
Biplanar thermoplastic chainsWLF 1701 SERIES
Biplanar thermoplastic chainsWLF 1701 TAB SERIES
Biplanar thermoplastic chainsWLF 1702 SERIES
contents
Case conveyor chainsD 600 / D 600 TAB SERIES
Case conveyor chainsD 600 C / D 600 TAB C SERIES
Case conveyor chainsD 1400 / D 1400 TAB SERIES
Plastic corrosion resistance table
Credits
Thermoplastic straight running chains - SRH828 SERIES
Thermoplastic sideflexing chains780 TAB FG SERIES
Biplanar Thermoplastic chains WLF 1703 SERIES
Thermoplastic straight running chains - DHLBP 821 SERIES
Thermoplastic straight running chains - SRHLBP 8257 SERIES
Thermoplastic sideflexing chainsLBP 882 TAB SERIES
Thermoplastic sideflexing chains onmagnetic tracksLBP 882 M SERIES
2
materials
DACETAL RESINThe acetal resin offersvery good mechanicalspecifications, excellentwear resistance and alow coefficient offriction. Used in themanufacturing of plates for flat top chains, it isan economicalalternative to our LFAmaterial. FDA (Foodand Drug Administration)approved for directcontact with food.Working temperatures:- 40° C / + 80° C(dry environment)- 40° C / + 65° C(wet environment)
Colour: grey, white
LFA / WAF / WLFLOW FRICTIONACETAL RESINThis material has a lowcoefficient of friction, highwear resistance andexcellent resistance tochain tension. It isrecommended for highload, high speedapplications. FDA (Foodand Drug Administration)approved for directcontact with food.Working temperatures:- 40° C / + 80° C(dry environment)- 40° C / + 65° C(wet environment)
LFA colours: light brown,blueWAF/WLF colour: white
SPSUPER PERFORMANCEACETAL RESINThe super performanceresin has a lowercoefficient of friction thanLFA material. Plate wearand pitch elongation arereduced; it is suitable forhigh speed applicationsand reducedlubrication. FDA (Foodand Drug Administration)approved for directcontact with food.Working temperatures:- 40° C / + 80° C(dry environment)- 40° C / + 65° C(wet environment)
Colour: dark grey
SLEXTRA ADDITIVATEDACETAL RESINInternally lubrificatedpolyacetal forhight-speedapplications.Recommended onapplication fot PETcontainers andbottling lines.Increased wearresistance.Working temperatures:- 40° C / + 80° C(dry environment)- 40° C / + 65° C(wet environment)
Colour: light grey
AKHIGH WEAR RESISTANTACETAL RESINVery special materialwith aramidic fibers andlow friction coefficientrecommended on dryapplications for glass,PET container andbottling lines.Working temperatures:- 40° C / + 80° C(dry environment)- 40° C / + 65° C(wet environment)
Colour: dark grey,yellow
MATERIALS
3
WRXWEAR RESISTANTPOLYAMIDECOMPOSITEIt is especially wearresistant in abrasiveenvironment and it issuitable for conveyingglass, mechanicalcomponents, sand, etc.Working temperatures:- 20° C / + 120° C(dry environment)
Colour: black
ASANTISTATICACETAL RESINThis material offers great protection against staticelectrical charges. It isideal for explosiveatmosphere and wherean electrostatic forcemay cause productinstability.Working temperatures: - 40° C / + 80° C(dry environment)- 40° C / + 65° C(wet environment)
Colour: black
PPBCHEMICAL RESISTANTREINFORCEDPOLYPROPYLENEThis improvedpolypropylene has acidand corrosion resistance characteristics; it isspeciallyrecommended when a chain is exposed to chemical agents.Working temperatures: + 5° C / + 105° C(dry environment)+ 5° C / + 105° C(wet environment)PPB chains dimensionsare larger than thoseindicated in the drawing. To know dimensions refer to our Technical Department.
Colour: white
PBTEXTRA PERFORMANCEPOLYESTER RESIN (Available upon request)It has a very low cofficientof friction and offers anexcellent wear resistance.Plate wear and pitchelongation are reduced.It is specially developedfor high speed and dryrunning applications.Working temperatures: - 40° C / + 125° C(dry environment)- 40° C / + 60° C(wet environment)
Colour:green, white
HTGLASS REINFORCEDPOLYESTER RESIN (Available upon request)Material with anextremely high resistanceto the heat and wear.Working temperatures: - 40° C / + 140° C(dry environment)
Colour: black
**
4Every care has been taken to ensure the accuracy of the information contained in this cataloguebut no liability can be accepted for any errors or omissions.
5
PLASTIC CHAINS 2012
Thermoplastic straight running chains - Single hinge
D 820ACETAL RESIN
820 SERIES
• Plates in self-lubricating acetal resin, grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
D 820 K250 internal code 6.00.020D 820 K325 internal code 6.00.040D 820 K343 internal code 6.00.043D 820 K350 internal code 6.00.060D 820 K400 internal code 6.00.070D 820 K450 internal code 6.00.080D 820 K600 internal code 6.00.100D 820 K750 internal code 6.00.110
LFA 820 K250 internal code 6.10.020LFA 820 K325 internal code 6.10.040LFA 820 K330 internal code 6.10.042LFA 820 K343 internal code 6.10.043LFA 820 K350 internal code 6.10.060
D 820 K250D 820 K325D 820 K343D 820 K350D 820 K400D 820 K450D 820 K600D 820 K750
63.582.587.088.9101.6114.3152.4190.5
9.59.59.59.59.59.59.59.5
0.730.830.850.850.951.031.251.47
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in acetal resin,
white-coloured.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
CHARACTERISTICSWidth L(mm)
Height h(mm)
Weightkg/m
44444444
Thickness S(mm)
LFA 820 K400 internal code 6.10.070LFA 820 K450 internal code 6.10.080LFA 820 K500 internal code 6.10.090
LFA 820LOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
PRODUCT CODESPRODUCT CODES
LFA 820 K600 internal code 6.10.100LFA 820 K750 internal code 6.10.110
LFA 820 K250LFA 820 K325LFA 820 K330LFA 820 K343LFA 820 K350
63.582.583.887.088.9 9.5
9.59.59.59.5 0.73
0.830.830.850.85
CHARACTERISTICSWeight kg/m
44444
LFA 820 K400LFA 820 K450
101.6114.3
9.59.5
0.951.03
44
Width L(mm)
Height h(mm)
Thickness S(mm)
LFA 820 K500LFA 820 K600LFA 820 K750
127.0152.4190.5
9.59.59.5
1.101.251.47
444
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
TRAVEL
7
WRX 820 K325 internal code 6.50.040WRX 820 K400 internal code 6.50.070WRX 820 K450 internal code 6.50.080WRX 820 K600 internal code 6.50.100WRX 820 K750 internal code 6.50.110
WRX 820 K325WRX 820 K400WRX 820 K450WRX 820 K600WRX 820 K750
82.5101.6114.3152.4190.5 9.5
9.59.59.59.5 0.83
0.951.031.251.47
CHARACTERISTICSWeight
kg/m
44444
WRX 820WEAR RESISTANT POLYAMIDE COMPOSITE• Plates in thermoplastic wear resistant polyamide composite, black-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant.
Width L(mm)
Height h(mm)
Thickness S(mm)
SP 820SUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
SP 820 K325SP 820 K343SP 820 K350SP 820 K400SP 820 K450SP 820 K600SP 820 K750
82.587.088.9101.6114.3152.4190.5
9.59.59.59.59.59.59.5
0.830.850.870.951.031.251.47
CHARACTERISTICSWidth L
(mm)Height h
(mm)Weight
kg/m
4444444
Thickness S(mm)
SP 820 K325 internal code 6.20.040SP 820 K343 internal code 6.20.043SP 820 K350 internal code 6.20.060SP 820 K400 internal code 6.20.070SP 820 K450 internal code 6.20.080SP 820 K600 internal code 6.20.100SP 820 K750 internal code 6.20.110
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES
PRODUCT CODES
AK 820HIGH WEAR RESISTANT ACETAL RESIN• Plates in a very special acetal resin with aramidic fibers, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
AK 820 K325AK 820 K343AK 820 K350AK 820 K400AK 820 K450AK 820 K600AK 820 K750
82.587.088.9101.6114.3152.4190.5
9.59.59.59.59.59.59.5
0.830.850.870.951.031.251.47
CHARACTERISTICSWidth L
(mm)Height h
(mm)Weight kg/m
4444444
Thickness S(mm)
AK 820 K325 internal code 6.80.040AK 820 K343 internal code 6.80.043AK 820 K350 internal code 6.80.060AK 820 K400 internal code 6.80.070AK 820 K450 internal code 6.80.080AK 820 K600 internal code 6.80.100AK 820 K750 internal code 6.80.110
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in special acetal
resin, with aramidic fibers yellow-coloured.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES
AS 820 K325 internal code 6.30.040AS 820 K350 internal code 6.30.060AS 820 K400 internal code 6.30.070AS 820 K450 internal code 6.30.080AS 820 K600 internal code 6.30.100AS 820 K750 internal code 6.30.110
AS 820 K325AS 820 K350AS 820 K400AS 820 K450 AS 820 K600
82.588.9
101.6114.3152.4 9.5
9.59.59.59.5 0.83
0.870.951.031.25
CHARACTERISTICSWeight
kg/m
44444
AS 820 K750 190.5 9.5 1.474
AS 820ANTISTATIC ACETAL RESIN• Plates in antistatic conductive acetal resin, black-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
Width L(mm)
Height h(mm)
Thickness S(mm)
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES
8
PPB 820CHEMICAL RESISTANT REINFORCED POLYPROPYLENE• Plates in chemical resistant reinforced polypropylene, white-coloured.• Pins in chrome-nickel austenitic stainless steel (18% Chrome – 8% Nickel),
work hardened for high resistance.
PPB 820 K325 internal code 6.40.040PPB 820 K350 internal code 6.40.060PPB 820 K400 internal code 6.40.070PPB 820 K450 internal code 6.40.080PPB 820 K600 internal code 6.40.100PPB 820 K750 internal code 6.40.110
PPB 820 K325PPB 820 K350PPB 820 K400PPB 820 K450PPB 820 K600PPB 820 K750
82.588.9
101.6114.3152.4190.5
9.59.59.59.59.59.5
0.700.740.820.901.051.20
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless
steel, 316 series, work hardened, highly wear resistant, or with pins inreinforced polypropylene.
CHARACTERISTICSWidth L
(mm)Height h
(mm)Weight
kg/m
444444
Thickness S(mm)
PRODUCT CODES
PBT 820EXTRA PERFORMANCE POLYESTER RESIN• Plates in low friction polyester resin, green-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
PBT 820 K325 internal code 6.70.040PBT 820 K350 internal code 6.70.060PBT 820 K400 internal code 6.70.070PBT 820 K450 internal code 6.70.080PBT 820 K600 internal code 6.70.100PBT 820 K750 internal code 6.70.110
PBT 820 K325PBT 820 K350PBT 820 K400PBT 820 K450PBT 820 K600PBT 820 K750
82.588.9
101.6114.3152.4190.5
9.59.59.59.59.59.5
0.830.850.951.031.251.47
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in extra performance
polyester resin, white-coloured.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
CHARACTERISTICSWidth L
(mm)Height h
(mm)Weight kg/m
444444
Thickness S(mm)
PRODUCT CODES
Thermoplastic straight running chains - Single hinge
LFA 831LOW FRICTION ACETAL RESIN
831 SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 831 K325 internal code 6.11.040LFA 831 K400 internal code 6.11.070LFA 831 K450 internal code 6.11.080LFA 831 K600 internal code 6.11.100LFA 831 K750 internal code 6.11.110
SP 831 K325 internal code 6.21.040SP 831 K400 internal code 6.21.070SP 831 K450 internal code 6.21.080SP 831 K600 internal code 6.21.100SP 831 K750 internal code 6.21.110
LFA 831 K325LFA 831 K400LFA 831 K450LFA 831 K600 LFA 831 K750
82.5101.6114.3152.4190.5
8.78.78.78.78.7
1.001.151.241.511.76
CHARACTERISTICSWidth L
(mm)Height h
(mm)Weight
kg/m
4.84.84.84.84.8
Thickness S(mm)
SP 831 K325SP 831 K400SP 831 K450SP 831 K600SP 831 K750
82.5101.6114.3152.4190.5 8.7
8.78.78.78.7 1.00
1.151.241.511.76
CHARACTERISTICSWeight kg/m
4.84.84.84.84.8
SP 831SUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
Width L(mm)
Height h(mm)
Thickness S(mm)
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES PRODUCT CODES
TRAVEL
Top plate thickness 4,8mmTop plate thickness 4,8mm
h
Thermoplastic straight running chains - Single reinforced hinge828 SERIES
AK 828HIGH WEAR RESISTANT ACETAL RESIN• Plates in a very special acetal resin with aramidic fibers, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
AK 828 K325 internal code 6.88.240AK 828 K330 internal code 6.88.242
AK 828 K325AK 828 K330
82.583.8
1111
1.051.08
CHARACTERISTICSWidth L
(mm)Height h
(mm)Weight
kg/m
44
Thickness S(mm)
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in special acetal
resin, with aramidic fibers yellow-coloured.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES
SP 828SUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
SP 828 K325 internal code 6.28.240SP 828 K330 internal code 6.28.242
SP 828 K325SP 828 K330
82.583.8
1111
1.051.08
CHARACTERISTICSWidth L
(mm)Height h
(mm)Weight
kg/m
44
Thickness S(mm)
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES
LFA 828LOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 828 K325 internal code 6.18.240LFA 828 K330 internal code 6.18.242
LFA 828 K325LFA 828 K330
82.583.8
1111
1.051.08
CHARACTERISTICSWidth L
(mm)Height h
(mm)Weight
kg/m
44
Thickness S(mm)
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES
TRAVEL
HIGHLOAD
CAPACITY
ZERO GAP
11
60,0
56,6 9,5
8,0
19,050
8257 SERIES
SP 8257SUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly
wear resistant.
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
LFA 8257 K750 internal code 6.10.175LFA 8257 K1000 internal code 6.10.185LFA 8257 K1200 internal code 6.10.195
LFA 8257LOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly
wear resistant.
PRODUCT CODES
LFA 8257 K750LFA 8257 K1000LFA 8257 K1200
190.5254.0304.8 14.2
14.214.2 2.20
2.552.90
CHARACTERISTICSWeight
kg/m
4.84.84.8
Width L(mm)
Height h(mm)
Thickness S(mm)
SP 8257 K750 internal code 6.20.175SP 8257 K1000 internal code 6.20.185SP 8257 K1200 internal code 6.20.195
PRODUCT CODES
SP 8257 K750SP 8257 K1000SP 8257 K1200
190.5254.0304.8 14.2
14.214.2 2.20
2.552.90
CHARACTERISTICSWeight
kg/m
4.84.84.8
Width L(mm)
Height h(mm)
Thickness S(mm)
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
TRAVEL
12
LFA 821LOW FRICTION ACETAL RESIN
• Plates in self-lubricating low friction acetal resin,light brown-coloured.
• Pins in special chrome-nickel stainless steel, workhardened for high resistance.
LFA 821 K750 internal code 6.14.110LFA 821 K1000 internal code 6.14.120
Thermoplastic straight running chains - Double hinge821 SERIES
LFA 821 K1200 internal code 6.14.130
LFA 821 K750LFA 821 K1000LFA 821 K1200
190.5254.0304.8
2.502.953.25
- Standard shipping lengths = 80 pitches = 10 feet= 3,048 metres.
- These chains can be supplied with pins in austeniticstainless steel, work hardened, highly wear resistant.
CHARACTERISTICSWidth L
(mm)Weight
kg/m
PRODUCT CODES
SP 821SUPER PERFORMANCE ACETAL RESIN
• Plates in self-lubricating very low friction acetal resin,dark grey-coloured.
• Pins in special chrome-nickel stainless steel, workhardened for high resistance.
SP 821 K750 internal code 6.24.110SP 821 K1000 internal code 6.24.120SP 821 K1200 internal code 6.24.130
SP 821 K750SP 821 K1000SP 821 K1200
190.5254.0304.8
2.502.953.25
- Standard shipping lengths = 80 pitches = 10 feet= 3,048 metres.
- These chains can be supplied with pins in austeniticstainless steel, work hardened, highly wear resistant.
CHARACTERISTICSWidth L
(mm)Weight
kg/m
PRODUCT CODES
PPB 821CHEMICAL RESISTANT REINFORCEDPOLYPROPYLENE • Plates in chemical resistant reinforced polypropylene,
white-coloured.• Pins in chrome-nickel austenitic stainless steel (18%
Chrome - 8% Nickel), work hardened for high resistance.
PPB 821 K750 internal code 6.44.110PPB 821 K1000 internal code 6.44.120
PPB 821 K1200 internal code 6.44.130
PPB 821 K750PPB 821 K1000PPB 821 K1200
190.5254.0304.8
2.502.953.25
- Standard shipping lengths = 80 pitches = 10 feet= 3,048 metres.
- These chains can be supplied with pins in austeniticstainless steel, 316 series, work hardened, highly wearresistant.
CHARACTERISTICSWidth L
(mm)Weight kg/m
PRODUCT CODES
TRAVEL
13
Thermoplastic sideflexing chains
LFA 880LOW FRICTION ACETAL RESIN
880 / 879 SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 880 K325 internal code 6.12.040LFA 880 K330 internal code 6.12.044
PRODUCT CODES
LFA 880 K350 internal code 6.12.060LFA 880 K450 internal code 6.12.080LFA 880 K750 internal code 6.12.110
CHARACTERISTICSL
(mm)h
(mm)R
(mm)GC st.(mm)
GC sid.(mm)
Weightkg/m
S(mm)
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
LFA 880 K330LFA 880 K350LFA 880 K450LFA 880 K750
83.888.9
114.3190.5
16161616
0.900.911.041.40
400400400400
44.544.544.544.5
41.441.441.441.4
4444
LFA 879LOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 879 K325 internal code 6.13.040LFA 879 K330 internal code 6.13.042
PRODUCT CODES
LFA 879 K350 internal code 6.13.060LFA 879 K450 internal code 6.13.080
LFA 879 K325LFA 879 K330
82.583.8
15.215.2
0.930.97
CHARACTERISTICSL
(mm)h
(mm)
400400
R(mm)
44.544.5
GC st.(mm)
41.441.4
GC sid.(mm)
Weight kg/m
4.84.8
S(mm)
LFA 879 K350 88.9 15.2 1.05400 44.5 41.4 4.8LFA 879 K450 114.3 15.2 1.10400 44.5 41.4 4.8
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel, work
hardened, highly wear resistant, or with pins in thermoplastic resin.
TRAVEL
LFA 880 K325 82.5 16 0.89400 44.5 41.4 4
Top plate thickness 4,8mm
14
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in acetal resin, white-coloured.- These chains can be supplied either with pins in austenitic stainless steel, work
hardened, highly wear resistant, or with pins in thermoplastic resin.
D 880 TABACETAL RESIN• Plates in self-lubricating acetal resin, grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
D 880 TAB K325 internal code 6.02.041D 880 TAB K350 internal code 6.02.061D 880 TAB K450 internal code 6.02.081D 880 TAB K750 internal code 6.02.111
D 880 TAB K325D 880 TAB K350D 880 TAB K450D 880 TAB K750
88.9114.3190.5
161616
1.011.081.48
400400400
11.511.511.5
464646
44.244.244.2
PRODUCT CODES
LFA 880 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
LFA 880 TAB K250 internal code 6.12.021LFA 880 TAB K325 internal code 6.12.041LFA 880 TAB K330 internal code 6.12.042
PRODUCT CODES
CHARACTERISTICSL
(mm)h
(mm)R
(mm)G
(mm)GC st.(mm)
GC sid.(mm)
Weightkg/m
82.5 16 0.94400 11.5 46 44.2
LFA 880 TAB K343 internal code 6.12.043LFA 880 TAB K350 internal code 6.12.061LFA 880 TAB K450 internal code 6.12.081LFA 880 TAB K600 internal code 6.12.101LFA 880 TAB K750 internal code 6.12.111
LFA 880 TAB K250LFA 880 TAB K325LFA 880 TAB K330
82.583.8
1616
0.940.96
CHARACTERISTICS
400400
11.511.5
4646
44.244.2
63.5 16 0.80
L(mm)
h(mm)
400
R(mm)
11.5
G(mm)
46
GC st.(mm)
44.2
GC sid.(mm)
Weight kg/m
LFA 880 TAB K343LFA 880 TAB K350
87.088.9
1616
0.991.01
400400
11.511.5
4646
44.244.2
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
LFA 880 TAB K450LFA 880 TAB K600LFA 880 TAB K750
114.3152.4190.5
161616
1.081.281.48
400400400
11.511.511.5
464646
44.244.244.2
TRAVEL
880 TAB SERIES
15
AS 880 TABANTISTATIC ACETAL RESIN• Plates in antistatic conductive acetal resin, black-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
AS 880 TAB K325 internal code 6.32.041AS 880 TAB K350 internal code 6.32.061AS 880 TAB K450 internal code 6.32.081AS 880 TAB K750 internal code 6.32.111
AS 880 TAB K325AS 880 TAB K350AS 880 TAB K450AS 880 TAB K750
88.9114.3190.5
161616
1.811.881.28
400400400
11.511.511.5
464646
44.244.244.2
PRODUCT CODES
CHARACTERISTICSL
(mm)h
(mm)R
(mm)G
(mm)GC st.(mm)
GC sid.(mm)
Weightkg/m
82.5 16 0.74400 11.5 46 44.2
WRX 880 TAB K325 internal code 6.52.041WRX 880 TAB K350 internal code 6.52.061WRX 880 TAB K450 internal code 6.52.081WRX 880 TAB K750 internal code 6.52.111
WRX 880 TAB K325WRX 880 TAB K350WRX 880 TAB K450WRX 880 TAB K750
88.9114.3190.5
161616
1.011.081.48
400400400
11.511.511.5
464646
44.244.244.2
PRODUCT CODES
CHARACTERISTICSL
(mm)h
(mm)R
(mm)G
(mm)GC st.(mm)
GC sid.(mm)
Weight kg/m
82.5 16 0.94400 11.5 46 44.2
WRX 880 TABWEAR RESISTANT POLYAMIDE COMPOSITE• Plates in thermoplastic wear resistant polyamide composite, black-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant.
SP 880 TABSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
SP 880 TAB K250 internal code 6.22.021SP 880 TAB K325 internal code 6.22.041SP 880 TAB K343 internal code 6.22.043
PRODUCT CODES
SP 880 TAB K350 internal code 6.22.061SP 880 TAB K450 internal code 6.22.081SP 880 TAB K600 internal code 6.22.101SP 880 TAB K750 internal code 6.22.111
SP 880 TAB K250SP 880 TAB K325SP 880 TAB K343SP 880 TAB K350
82.587.088.9
161616
0.940.991.01
CHARACTERISTICS
400400400
11.511.511.5
464646
44.244.244.2
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
SP 880 TAB K450SP 880 TAB K600SP 880 TAB K750
114.3152.4190.5
161616
1.081.281.48
400400400
11.511.511.5
464646
44.244.244.2
63.5 16 0.80
L(mm)
h(mm)
400
R(mm)
11.5
G(mm)
46
GC st.(mm)
44.2
GC sid.(mm)
Weightkg/m
AK 880 TABHIGH WEAR RESISTANT ACETAL RESIN• Plates in a very special acetal resin with aramidic fibers, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
AK 880 TAB K250 internal code 6.82.021AK 880 TAB K325 internal code 6.82.041AK 880 TAB K343 internal code 6.82.043
PRODUCT CODES
AK 880 TAB K350 internal code 6.82.061AK 880 TAB K450 internal code 6.82.081AK 880 TAB K600 internal code 6.82.101AK 880 TAB K750 internal code 6.82.111
AK 880 TAB K250AK 880 TAB K325AK 880 TAB K343AK 880 TAB K350
82.587.088.9
161616
0.940.991.01
CHARACTERISTICS
400400400
11.511.511.5
464646
44.244.244.2
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in special acetal
resin, with aramidic fibers yellow-coloured.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
AK 880 TAB K450AK 880 TAB K600AK 880 TAB K750
114.3152.4190.5
161616
1.081.281.48
400400400
11.511.511.5
464646
44.244.244.2
63.5 16 0.80
L(mm)
h(mm)
400
R(mm)
11.5
G(mm)
46
GC st.(mm)
44.2
GC sid.(mm)
Weightkg/m
16
4,8
TRAVEL
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel, 316 series,
work hardened, highly wear resistant, or with pins in reinforced polypropylene.
PPB 880 TABCHEMICAL RESISTANT REINFORCED POLYPROPYLENE• Plates in chemical resistant reinforced polypropylene, white-coloured.• Pins in chrome-nickel austenitic stainless steel (18% Chrome – 8% Nickel),
work hardened for high resistance.
PPB 880 TAB K325 internal code 6.42.041PPB 880 TAB K350 internal code 6.42.061PPB 880 TAB K450 internal code 6.42.081PPB 880 TAB K750 internal code 6.42.111
PPB 880 TAB K325PPB 880 TAB K350PPB 880 TAB K450PPB 880 TAB K750
88.9114.3190.5
161616
0.810.881.28
400400400
11.511.511.5
464646
44.244.244.2
PRODUCT CODES
CHARACTERISTICSL
(mm)h
(mm)R
(mm)G
(mm)GC st.(mm)
GC sid.(mm)
Weightkg/m
82.5 16 0.74400 11.5 46 44.2
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in extra performance
polyester resin, white-coloured.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PBT 880 TABEXTRA PERFORMANCE POLYESTER RESIN• Plates in low friction polyester resin, green-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
PBT 880 TAB K325 internal code 6.72.041PBT 880 TAB K350 internal code 6.72.061PBT 880 TAB K450 internal code 6.72.081PBT 880 TAB K750 internal code 6.72.111
PBT 880 TAB K325PBT 880 TAB K350PBT 880 TAB K450PBT 880 TAB K750
88.9114.3190.5
161616
1.011.081.48
400400400
11.511.511.5
464646
44.244.244.2
PRODUCT CODES
CHARACTERISTICSL
(mm)h
(mm)R
(mm)G
(mm)GC st.(mm)
GC sid.(mm)
Weight kg/m
82.5 16 0.94400 11.5 46 44.2
LFA 879 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
LFA 879 TAB K325 internal code 6.13.041LFA 879 TAB K330 internal code 6.13.242LFA 879 TAB K350 internal code 6.13.061LFA 879 TAB K450 internal code 6.13.081
PRODUCT CODES
LFA 879 TAB K325
LFA 879 TAB K450
82.5
114.3
15.2
15.2
0.98
1.14
CHARACTERISTICSL
(mm)h
(mm)
400
400
R(mm)
11
11
G(mm)
46
46
GC st.(mm)
44.2
44.2
GC sid.(mm)
Weightkg/m
LFA 879 TAB K330 83.8 15.2 1.02400 11 46 44.2LFA 879 TAB K350 88.9 15.2 1.10400 11 46 44.2
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
SP 879 TABSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
SP 879 TAB K325 internal code 6.23.041
SP 879 TAB K450 internal code 6.23.081
PRODUCT CODES
SP 879 TAB K325
SP 879 TAB K450
82.5
114.3
15.2
15.2
0.98
1.14
CHARACTERISTICSL
(mm)h
(mm)
400
400
R(mm)
11
11
G(mm)
46
46
GC st.(mm)
44.2
44.2
GC sid.(mm)
Weight kg/m
SP 879 TAB K330 internal code 6.23.242
SP 879 TAB K330 83.8 15.2 1.02 400 11 46 44.2
SP 879 TAB K350 internal code 6.23.061
SP 879 TAB K350 88.9 15.2 1.10400 11 46 44.2
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
879 TAB SERIES
Top plate thickness 4,8mm Top plate thickness 4,8mm
L
Rd min.= 40
20
7,14
38,1
7,55
GC
S
42,9
61,1
11,5
R
17
880 BO / 879 BO SERIES
TRAVEL
LFA 880 BOLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 880 BO K250 internal code 6.19.020LFA 880 BO K325 internal code 6.19.040LFA 880 BO K450 internal code 6.19.080
LFA 880 BO K250LFA 880 BO K325LFA 880 BO K450
63.582.5
114.3
0.880.961.04
CHARACTERISTICL
(mm)
190190190
R(mm)
464646
GC st.(mm)
44.244.244.2
GC sid.(mm)
Weightkg/m
444
S(mm)
82.5114.3
1.081.23
L(mm)
190190
R(mm)
4646
GC st.(mm)
44.244.2
GC sid.(mm)
Weightkg/m
4.84.8
S(mm)
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES
LFA 879 BOLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 879 BO K325 internal code 6.17.040LFA 879 BO K450 internal code 6.17.080
LFA 879 BO K325LFA 879 BO K450
CHARACTERISTICS
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES
REDUCED SIDEFLEXINGRADIUS (R.190)
Top plate thickness 4,8mm
18
S
878 BO SERIES
TRAVEL
LFA 878 BOLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 878 BO K325 internal code 6.17.041LFA 878 BO K450 internal code 6.17.081
SP 878 BO K325 internal code 6.27.041SP 878 BO K450 internal code 6.27.081
SP 878 BOSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 878 BO K325LFA 878 BO K450
82.5114.3
1.081.20
CHARACTERISTICSL
(mm)
190190
R(mm)
4646
GC st.(mm)
44.244.2
GC sid.(mm)
Weightkg/m
4.84.8
S(mm)
CHARACTERISTICS
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
PRODUCT CODES PRODUCT CODES
SP 878 BO K325SP 878 BO K450
82.5114.3
1.081.20
L(mm)
190190
R(mm)
4646
GC st.(mm)
44.244.2
GC sid.(mm)
Weight kg/m
4.84.8
S(mm)
REDUCED SIDEFLEXINGRADIUS (R.190)
REDUCED PLATE GAP
Top plate thickness 4,8mm Top plate thickness 4,8mm
19
Thermoplastic sideflexing chains on magnetic tracks
LFA 880 MLOW FRICTION ACETAL RESIN
880 M / 879 M SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic,
highly wear resistant.
LFA 880 M K325 (*) internal code 6.18.040LFA 880 M K330 (*) internal code 6.18.042
SP 880 MSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly
wear resistant.
LFA 880 M K350 internal code 6.18.060
LFA 880 M K325LFA 880 M K330LFA 880 M K350
CHARACTERISTICS
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
82.583.8
1.031.06
L(mm)
4444
GC st.(mm)
4444
GC sid.(mm)
Weightkg/m
44
88.9 1.1044 444
S(mm)
LFA 879 MLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly
wear resistant.
SP 880 M K325 (*) internal code 6.28.040SP 880 M K330 (*) internal code 6.28.042SP 880 M K350 internal code 6.28.060
LFA 880 M K450 internal code 6.18.080 SP 880 M K450 internal code 6.28.080
SP 880 M K325SP 880 M K330SP 880 M K350
CHARACTERISTICS
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
82.583.8
1.031.06
L(mm)
4444
GC st.(mm)
4444
GC sid.(mm)
Weightkg/m
44
88.9 1.1044 444
S(mm)
LFA 879 M K325 (*) internal code 6.16.040LFA 879 M K450 internal code 6.16.080
PRODUCT CODES
LFA 879 M K325LFA 879 M K450
CHARACTERISTICS
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.
82.5 1.08
L(mm)
44
GC st.(mm)
44
GC sid.(mm)
Weightkg/m
4.8114.3 1.24 44 444.8
S(mm)
TRAVEL
500500
R(mm)
457
500500
R(mm)
457LFA 880 M K450 114.3 1.16 44 444 SP 880 M K450 114.3 1.16 44 444457 457
500
R(mm)
457
(*) REDUCED PLATE GAP
Top plate thickness 4,8mm
These chains can be supplied with pins type D.(Same pins used for chains type 880 TAB series).
20
L
14,2
GC
4,8
56,6
Rd min. = 50
9,5
8,0
38,1
19,0
R
Thermoplastic sideflexing chains on magnetic tracks882 M SERIES
TRAVEL
LFA 882 MLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly wear
resistant.
LFA 882 M K750 internal code 6.18.175LFA 882 M K1000 internal code 6.18.185
LFA 882 M K750
CHARACTERISTICS
PRODUCT CODES
LFA 882 M K1000LFA 882 M K1200
190.5
Width L(mm)
254.0304.8
2.16
Weightkg/m
2.452.70
610
Radius R(mm)
610610
60
GC(mm)
6060
190.5
Width L(mm)
254.0304.8
2.16
Weight kg/m
2.452.70
610
Radius R(mm)
610610
60
GC(mm)
6060
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.
LFA 882 M K1200 internal code 6.18.195
SP 882 MSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly wear
resistant.
SP 882 M K750 internal code 6.28.175PRODUCT CODES
SP 882 M K1000 internal code 6.28.185SP 882 M K1200 internal code 6.28.195
SP 882 M K750SP 882 M K1000
CHARACTERISTICS
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.
SP 882 M K1200
21
S
LFA 882LOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
LFA 882 K450 internal code 6.15.080LFA 882 K750 internal code 6.15.110
LFA 882 K450LFA 882 K750
114.3190.5
1.942.38
CHARACTERISTICSWidth L(mm)
610610
Radius R(mm)
61.961.9
GC str.(mm)
5858
GC sid.(mm)
Weightkg/m
4.84.8
S(mm)
PRODUCT CODES
LFA 882 K1000LFA 882 K1200
254.0304.8
2.832.75
610610
61.961.9
5858
4.84.8
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel, work hardened,
highly wear resistant, or with pins in thermoplastic resin.
LFA 882 K1000 internal code 6.15.120LFA 882 K1200 internal code 6.15.130
Thermoplastic sideflexing chains882 SERIES
TRAVEL
22
SP 882 TABSUPER PERFORMANCE ACETAL RESIN
882 TAB SERIES
• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
SP 882 TAB K450 internal code 6.25.081SP 882 TAB K750 internal code 6.25.111
PRODUCT CODES
PPB 882 TABCHEMICAL RESISTANT REINFORCED POLYPROPYLENE• Plates in chemical resistant reinforced polypropylene, white-coloured.• Pins in chrome-nickel austenitic stainless steel (18% Chrome – 8% Nickel),
work hardened for high resistance.
PPB 882 TAB K750* internal code 6.45.111PPB 882 TAB K1000* internal code 6.45.121
PRODUCT CODES
SP 882 TAB K1000 internal code 6.25.121SP 882 TAB K1200 internal code 6.25.131
SP 882 TAB K450SP 882 TAB K750SP 882 TAB K1000
CHARACTERISTICS
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless
steel, work hardened, highly wear resistant, or with pins in thermoplasticresin.
SP 882 TAB K1200
LFA 882 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 882 TAB K450 internal code 6.15.081LFA 882 TAB K750 internal code 6.15.111
PRODUCT CODES
LFA 882 TAB K1000 internal code 6.15.121LFA 882 TAB K1200 internal code 6.15.131
LFA 882 TAB K450LFA 882 TAB K750LFA 882 TAB K1000
CHARACTERISTICS
114.3190.5
1.982.43
Width L(mm)
610610
R(mm)
6060
GC st.(mm)
5858
GC sid.(mm)
Weightkg/m
254.0 2.87610 60 58
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
LFA 882 TAB K1200 304.8 3.41610 60 58
114.3190.5
1.982.43
Width L(mm)
610610
R(mm)
6060
GC st.(mm)
5858
GC sid.(mm)
Weightkg/m
254.0 2.87610 60 58304.8 3.41610 60 58
PPB 882 TAB K1200* internal code 6.45.131
PPB 882 TAB K750*PPB 882 TAB K1000*PPB 882 TAB K1200*
CHARACTERISTICS
* Size produced only upon request. Delivery conditions and termsto be agreed.
- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless
steel, 316 series, work hardened, highly wear resistant, or with pins inreinforced polypropylene.
190.5254.0
2.432.87
Width L(mm)
610610
R(mm)
6060
GC st.(mm)
5858
GC sid.(mm)
Weight kg/m
304.8 3.41610 60 58
TRAVEL
23
S
L
Rd min. = 130
LFA 780 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 780 TAB K330 internal code 9.12.042
LFA 780 TAB K330 83.8 1.93
CHARACTERISTICSWidth L
(mm)
500
Radius R(mm)
Weightkg/m
8.7
S(mm)
PRODUCT CODES
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.- These chains can be supplied with pins in austenitic stainless steel,
work hardened, highly wear resistant.
Thermoplastic sideflexing chains780 TAB SERIES
TRAVEL
SP 780 TAB K330 internal code 9.22.042LFA 780 TAB K450 internal code 9.12.081 SP 780 TAB K450 internal code 9.22.081
SP 780 TAB K330 83.8 1.93
CHARACTERISTICSWidth L
(mm)
500
Radius R(mm)
Weightkg/m
8.7LFA 780 TAB K450 114.3 2.205008.7 SP 780 TAB K450 114.3 2.205008.7
S(mm)
PRODUCT CODES
SP 780 TABSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.- These chains can be supplied with pins in austenitic stainless steel,
work hardened, highly wear resistant.
24
L
Rd min. = 130
10S
Thermoplastic sideflexing chains790 TAB SERIES
LFA 790 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
LFA 790 TAB K330 internal code 9.15.042
LFA 790 TAB K330 83.8 2.13
CHARACTERISTICSWidth L
(mm)
500
Radius R(mm)
Weightkg/m
12.7
S(mm)
PRODUCT CODES
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.- These chains can be supplied with pins in austenitic stainless steel,
work hardened, highly wear resistant.
SP 790 TAB K330 internal code 9.25.042LFA 790 TAB K450 internal code 9.15.081 SP 790 TAB K450 internal code 9.25.081
SP 790 TAB K330 83.8 2.13
CHARACTERISTICSWidth L
(mm)
500
Radius R(mm)
Weightkg/m
12.7LFA 790 TAB K450 114.3 2.4250012.7 SP 790 TAB K450 114.3 2.4250012.7
S(mm)
PRODUCT CODES
SP 790 TABSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high
resistance.
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.- These chains can be supplied with pins in austenitic stainless steel,
work hardened, highly wear resistant.
TRAVEL
25
19
12,2
12,58,63
4442,1
138,7
L
Rd
Thermoplastic sideflexing chains on magnetic tracks
LFA 780 MLOW FRICTION ACETAL RESIN
780 M SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic,
highly wear resistant.
LFA 780 M K330 internal code 9.18.042
SP 780 MSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic,
highly wear resistant.
LFA 780 M K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
1.68
Weightkg/m
WRX 780 MWEAR RESISTANT POLYAMIDE COMPOSITE• Plates in thermoplastic wear resistant polyamide composite, black-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic,
highly wear resistant.
AK 780 MHIGH WEAR RESISTANT ACETAL RESIN• Plates in a very special acetal resin with aramidic fibers, dark grey-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic,
highly wear resistant.
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
WRX 780 M K330 internal code 9.58.042
WRX 780 M K330
AK 780 M K330 internal code 9.88.042
AK 780 M K330
83.8
Width L(mm)
500
Radius R(mm)
130
Rd(mm)
SP 780 M K330 internal code 9.28.042
SP 780 M K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
1.68
Weightkg/m
83.8
Width L(mm)
500
Radius R(mm)
130
Rd(mm)
CHARACTERISTICS
PRODUCT CODES
1.68
Weightkg/m
83.8
Width L(mm)
500
Radius R(mm)
130
Rd(mm)
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in special acetal
resin, with aramidic fibers yellow-coloured.
PRODUCT CODES
1.68
Weightkg/m
83.8
Width L(mm)
500
Radius R(mm)
130
LFA 780 M K450 internal code 9.18.080
LFA 780 M K450 1.97
WRX 780 M K450 internal code 9.58.080
WRX 780 M K450
AK 780 M K450 internal code 9.88.080
AK 780 M K450
114.3 500130
SP 780 M K450 internal code 9.28.080
SP 780 M K450 1.97114.3 500130
1.97114.3 500130 1.97114.3 500130
Rd(mm)
TRAVEL
19
16,2
12,58,63
4442,1
1312,7
L
Rd
26
Thermoplastic sideflexing chains on magnetic tracks
LFA 790 MLOW FRICTION ACETAL RESIN
790 M SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic,
highly wear resistant.
LFA 790 M K330 internal code 9.19.042
SP 790 MSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic,
highly wear resistant.
LFA 790 M K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
1.68
Weightkg/m
83.8
Width L(mm)
500
Radius R(mm)
130
Rd(mm)
SP 790 M K330 internal code 9.29.042
SP 790 M K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
1.68
Weightkg/m
83.8
Width L(mm)
500
Radius R(mm)
130
Rd(mm)
LFA 790 M K450 internal code 9.19.080
LFA 790 M K450 1.90114.3 500130
SP 790 M K450 internal code 9.29.080
SP 790 M K450 1.90114.3 500130
TRAVEL
4442,1
13
19
12,2
12,58,63
L
Rd
8,7
27
LFA 780 MFGLOW FRICTION ACETAL RESIN
780 MFG SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly
wear resistant.
LFA 780 MFG K330 internal code 9.18.242
SP 780 MFGSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly
wear resistant.
LFA 780 MFG K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODESSP 780 MFG K330 internal code 9.28.242
SP 780 MFG K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
WRX 780 MFGWEAR RESISTANT POLYAMIDE COMPOSITE• Plates in thermoplastic wear resistant polyamide composite, black-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic,
highly wear resistant.
WRX 780 MFG K330 internal code 9.58.242
AK 780 MFGHIGH WEAR RESISTANT ACETAL RESIN• Plates in a very special acetal resin with aramidic fibers, dark grey-coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic,
highly wear resistant.
WRX 780 MFG K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
TRAVEL
AK 780 MFG K330 internal code 9.88.242
AK 780 MFG K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in special acetal
resin, with aramidic fibers yellow-coloured.
PRODUCT CODES
83.8
Width L(mm)
500
Radius R(mm)
1.54
Weightkg/m
130
Rd(mm)
83.8
Width L(mm)
500
Radius R(mm)
1.54
Weightkg/m
130
Rd(mm)
83.8
Width L(mm)
500
Radius R(mm)
1.54
Weightkg/m
130
Rd(mm)
83.8
Width L(mm)
500
Radius R(mm)
1.54
Weightkg/m
130
Rd(mm)
28
8,7
LFA 780 TAB FGLOW FRICTION ACETAL RESIN
780 TAB FG SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special stainless steel, work hardened, highly wear resistant.
LFA 780 TAB FG K330 internal code 9.12.242
SP 780 TAB FGSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Pins in special stainless steel, work hardened, highly wear resistant.
LFA 780 TAB FG K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODESSP 780 TAB FG K330 internal code 9.22.242
SP 780 TAB FG K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
WRX 780 TAB FGWEAR RESISTANT POLYAMIDE COMPOSITE• Plates in thermoplastic wear resistant polyamide composite, black-coloured.• Pins in special stainless steel, work hardened, highly wear resistant.
WRX 780 TAB FG K330 internal code 9.52.242
AK 780 TAB FGHIGH WEAR RESISTANT ACETAL RESIN• Plates in a very special acetal resin with aramidic fibers, dark grey-coloured.• Pins in special stainless steel, work hardened, highly wear resistant.
WRX 780 TAB FG K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.
PRODUCT CODES
TRAVEL
AK 780 TAB FG K330 internal code 9.82.242
AK 780 TAB FG K330
CHARACTERISTICS
- Standard shipping lengths = 120 pitches = 10 feet = 3,048 metres.- The above-mentioned chains can also be produced in special acetal
resin, with aramidic fibers yellow-coloured.
PRODUCT CODES
83.8
Width L(mm)
500
Radius R(mm)
1.77
Weightkg/m
130
Rd(mm)
83.8
Width L(mm)
500
Radius R(mm)
1.77
Weightkg/m
130
Rd(mm)
83.8
Width L(mm)
500
Radius R(mm)
1.77
Weightkg/m
130
Rd(mm)
83.8
Width L(mm)
500
Radius R(mm)
1.77
Weightkg/m
130
Rd(mm)
Thermoplastic sideflexing chains
29
NEW
D.9,5
19.3
Rd. 400
L
136.5
GC
4.8
22.5 8
38.1D. 6.35
28.8
9.5
L
L
Thermoplastic straight running chains - Double hingeLBP 821 SERIES
LBP 821SUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Rollers are made of special wear resistance acetal resin, light-grey coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
PRODUCT CODES
LBP 821 K750LBP 821 K1000LBP 821 K1200
190.5254.0304.8
5.526.98.0
140140140
CHARACTERISTICSGC
(mm)Width L(mm)
- Standard shipping lenghts = 40 pitches = 5 feet = 1,524 metres.
- High breaking load.- Rollers are made in special material for low friction and hIgh wear resistance.- Very low back-line pressure.- Extremely quite running of the rollers.- Pins rollers support of 5 mm diameter, plugged-in and locked at the ends.
Weightkg/m
LBP 821 K750 internal code 6.24.110LBPLBP 821 K1000 internal code 6.24.120LBPLBP 821 K1200 internal code 6.24.130LBP
TRAV
EL
NEW
30
GC
D.9,5
19.3
38.1
Rd. 400
57
14.2
4.8
33.5
L
L
L
9.5
D.8
Thermoplastic straight running chains - Single reinforced hingeLBP 8257 SERIES
LBP 8257 K750 internal code 6.20.175LBPLBP 8257 K1000 internal code 6.20.185LBPLBP 8257 K1200 internal code 6.20.195LBP
LBP 8257SUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Rollers are made of special wear resistance acetal resin, light-grey coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly wear resistant.
PRODUCT CODES
CHARACTERISTICSGC
(mm)Width L(mm)
- Standard shipping lenghts = 40 pitches = 5 feet = 1,524 metres.
- High breaking load.- Rollers are made in special material for low friction and hIgh wear resistance.- Very low back-line pressure.- Extremely quite running of the rollers.- Pins rollers support of 5 mm diameter, plugged-in and locked at the ends.
Weightkg/m
LBP 8257 K750LBP 8257 K1000LBP 8257 K1200
190.5254.0304.8
5.657.28.1
606060
TRAV
EL
31
NEW
GC
57.2
76.2
17
22.5
D.9,5
19.3
279.5
38.1
41.8
Rd. 400
L
R
R
R
L
L
Thermoplastic sideflexing chainsLBP 882 TAB SERIES
LBP 882 TABSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Rollers are made of special wear resistance acetal resin, light-grey coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
PRODUCT CODES
LBP 882 TAB K750LBP 882 TAB K1000LBP 882 TAB K1200
CHARACTERISTICS
- Standard shipping lenghts = 40 pitches = 5 feet = 1,524 metres.
- High breaking load.- Rollers are made in special material for low friction and hIgh wear resistance.- Very low back-line pressure.- Extremely quite running of the rollers.- Pins rollers support of 5 mm diameter, plugged-in and locked at the ends.
LBP 882 TAB K750 internal code 6.25.111LBPLBP 882 TAB K1000 internal code 6.25.121LBPLBP 882 TAB K1200 internal code 6.25.131LBP
4.75.96.5
Weightkg/m
606060
GC(mm)
610610610
Radius R(mm)
190.5254.0304.8
Width L(mm)
TRAV
EL
NEW
32
GC
D.9,5
19.3
38.1
Rd. 400
57
14.2
4.8
33.5
R
L
L
R
R
L
9.5
D.8
Thermoplastic sideflexing chains on magnetic tracksLBP 882 M SERIES
LBP 882 M K750 internal code 6.28.175LBPLBP 882 M K1000 internal code 6.28.185LBPLBP 882 M K1200 internal code 6.28.195LBP
LBP 882 MSUPER PERFORMANCE ACETAL RESIN• Plates in self-lubricating very low friction acetal resin, dark grey-coloured.• Rollers are made of special wear resistance acetal resin, light-grey coloured.• Pins in special stainless steel, 400 series, work hardened, magnetic, highly wear resistant.
PRODUCT CODES
- Standard shipping lenghts = 40 pitches = 5 feet = 1,524 metres.
- High breaking load.- Rollers are made in special material for low friction and hIgh wear resistance.- Very low back-line pressure.- Extremely quite running of the rollers.- Pins rollers support of 5 mm diameter, plugged-in and locked at the ends.
LBP 882 M K750LBP 882 M K1000LBP 882 M K1200
CHARACTERISTICSWeightkg/m
606060
GC(mm)
610610610
Radius R(mm)
190.5254.0304.8
Width L(mm)
3.94.955.85
TRAV
EL
33
LFA 820 VACUUMLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured, with 2 or 3 bores
per link.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
LFA 820 K325 B2 B2 two bores internal code 6.10.040.2LFA 820 K350 B2 B2 two bores internal code 6.10.060.2
PRODUCT CODES
LFA 820 K450 B2 H30 B2 two bores internal code 6.10.080.2aLFA 820 K450 B2 H50 B2 two bores internal code 6.10.080.2b
Vacuum thermoplastic straight running chains820 VACUUM SERIES
LFA 820 K325 B2LFA 820 K350 B2
82.588.9
0.830.87
CHARACTERISTICSWidth L(mm)
6.54.0
Diam. bore d1(mm)
--
Diam. bore d2(mm)
1945
IA*(mm)
Weightkg/m
LFA 820 K450 B2 H30LFA 820 K450 B2 H50
114.3114.3
1.031.03
8.08.0
--
3050
LFA 820 K325 B3 B3 three bores internal code 6.10.040.3
LFA 820 K325 B3 82.5 0.837.9 4.4 20
* IA = Distance between centres.- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel, work hardened,
highly wear resistant, or with pins in thermoplastic resin.
TRAVEL TRAVEL
L
16,0
11,5
GC
4
42,9
61,1
d1
RL
d1
R
IA
Rd min.=40
20
7,14
38,1
7,55
34
LFA 880 TAB VACUUMLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured, with 1 or 2 bores per link.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
LFA 880 TAB K325 B1... B1 one bore internal code 6.12.041.1...PRODUCT CODES
LFA 880 TAB K325 B2... B2 two bores internal code 6.12.041.2ainternal code 6.12.041.2b
Vacuum thermoplastic sideflexing chains880 TAB VACUUM SERIES
CHARACTERISTICS
LFA 880 TAB K325 B2... 82.582.5
0.940.94
6.08.0
44.244.2
LFA 880 TAB K450 B2... 114.3 1.08 6.0 44.2
* IA = Distance between centres.- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel, work hardened, highly wear
resistant, or with pins in thermoplastic resin.
LFA 880 TAB K325 B1... 82.5 - 0.94
Width L(mm)
IA*(mm)
457
457
R(mm)
46
GC st.(mm)
44.2
GC sid.(mm)
Weightkg/m
5/6/6.58/9.5/10
Diam. bore d1(mm)
242024
LFA 880 TAB K450 B2... B2 two bores internal code 6.12.081.2a
457610
464646
TRAVEL TRAVEL
35
Straight running chains with thermoplastic top plates843 SERIES
LFA 843 K138 steel internal code 843.AC.138LFA 843 K144 steel internal code 843.AC.144LFA 843 K200 steel internal code 843.AC.010LFA 843 K250 steel internal code 843.AC.020LFA 843 K275* steel internal code 843.AC.200LFA 843 K325 steel internal code 843.AC.040LFA 843 SS K138 stainless steel internal code 843.AS.138LFA 843 SS K144 stainless steel internal code 843.AS.144LFA 843 SS K200 stainless steel internal code 843.AS.010LFA 843 SS K250 stainless steel internal code 843.AS.020
LFA 843LOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Base roller chain, 12.7 mm - 1/2” pitch.
PRODUCT CODES
LFA 843 SS K275* stainless steel internal code 843.AS.200LFA 843 SS K325 stainless steel internal code 843.AS.040
LFA 843 K138 steelLFA 843 K144 steel
LFA 843 K200 steel
LFA 843 K275* steel
LFA 843 K325 steel
34.936.550.8
69.982.5
0.830.840.89
0.941.03
LFA 843 K250 steel 63.5 0.92
CHARACTERISTICSWeight kg/m
LFA 843 SS K138 stainless steel LFA 843 SS K144 stainless steel LFA 843 SS K200 stainless steel
LFA 843 SS K275* stainless steel
34.936.550.8
69.9
0.830.840.89
0.94LFA 843 SS K250 stainless steel 63.5 0.92
Width L(mm)
Base rollerchain
LFA 843 SS K325 stainless steel 82.5 1.03
* Size produced only upon request. Delivery conditions and terms to be agreed.- Standard shipping lengths = 240 pitches = 10 feet = 3,048 metres.
TRAVEL
36
LFA 845 K118* steel internal code 845.AC.118LFA 845 K138 steel internal code 845.AC.138LFA 845 K200* steel internal code 845.AC.010LFA 845 SS K118* stainless steel internal code 845.AS.118LFA 845 SS K138* stainless steel internal code 845.AS.138LFA 845 SS K200* stainless steel internal code 845.AS.010
LFA 845LOW FRICTION ACETAL RESIN
845 SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Base roller chain, 12.7 mm - 1/2” pitch.
PRODUCT CODES
LFA 845 K118* steelLFA 845 K138 steel
LFA 845 K200* steel
LFA 845 SS K118* stainless steel
28.634.950.828.6
0.850.890.990.85
CHARACTERISTICSWeight
kg/m
LFA 845 SS K138* stainless steel
LFA 845 SS K200* stainless steel
34.950.8
0.890.99
Width L(mm)
* Size produced only upon request. Delivery conditions and terms to be agreed.- Standard shipping lengths = 240 pitches = 10 feet = 3,048 metres.
LFA 863 K175* steel internal code 863.AC.300
LFA 863 K250* steel internal code 863.AC.020LFA 863 K325 steel internal code 863.AC.040LFA 863 K450 steel internal code 863.AC.080LFA 863 K600 steel internal code 863.AC.100LFA 863 K750 steel internal code 863.AC.110LFA 863 SS K175* stainless steel internal code 863.AS.300
LFA 863 SS K250* stainless steel internal code 863.AS.020
LFA 863LOW FRICTION ACETAL RESIN
863 SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Base roller chain, 19.05 mm - 3/4” pitch.
PRODUCT CODES
LFA 863 SS K325 stainless steel internal code 863.AS.040LFA 863 SS K450 stainless steel internal code 863.AS.080LFA 863 SS K600 stainless steel internal code 863.AS.100LFA 863 SS K750 stainless steel internal code 863.AS.110
LFA 863 K175* steel
LFA 863 K250* steel
LFA 863 K325 steel
LFA 863 K450 steel
LFA 863 K600 steel
44.5
63.582.5
114.3152.4
1.8
2.02.12.32.5
CHARACTERISTICSWeight
kg/m
LFA 863 K750 steel
LFA 863 SS K175* stainless steel
LFA 863 SS K250* stainless steel
LFA 863 SS K325 stainless steel
190.544.5
63.582.5
2.71.8
2.02.1
LFA 863 K225 steel internal code 863.AC.015
LFA 863 SS K225 stainless steel internal code 863.AS.015
LFA 863 K225 steel 57.1 1.9
LFA 863 SS K225 stainless steel 57.1 1.9
Width L(mm)
LFA 863 SS K450 stainless steel 114.3 2.3LFA 863 SS K600 stainless steel 152.4 2.5LFA 863 SS K750 stainless steel 190.5 2.7
* Size produced only upon request. Delivery conditions and terms to be agreed.- Standard shipping lengths = 160 pitches = 10 feet = 3,048 metres.
Base rollerchain
Base rollerchain
TRAVEL
TRAVEL
37
LFA 863 TAB K450 steel internal code 863.AC.081
LFA 863 TAB K1000 steel internal code 863.AC.121
LFA 863 TAB K250 steel internal code 863.AC.021LFA 863 TAB K325 steel internal code 863.AC.041
LFA 863 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Base roller chain, 19.05 mm - 3/4” pitch.
PRODUCT CODES
LFA 863 TAB SS K250 stainless steel internal code 863.AS.021LFA 863 TAB SS K325 stainless steel internal code 863.AS.041LFA 863 TAB SS K450 stainless steel internal code 863.AS.081
LFA 863 TAB SS K1000 stainless steel internal code 863.AS.121
LFA 863 TAB K250 steelLFA 863 TAB K325 steel
63.582.5
2.102.20
CHARACTERISTICSWeight
kg/mWidth L
(mm)Base roller
chain
LFA 863 TAB K450 steel
LFA 863 TAB K1000 steel
114.3
254.0
2.40
3.10LFA 863 TAB SS K250 stainless steel
LFA 863 TAB SS K325 stainless steel
63.582.5
2.102.20
LFA 863 TAB SS K450 stainless steel
LFA 863 TAB SS K1000 stainless steel
114.3
254.0
2.40
3.10
LFA 863 TAB K600 steel internal code 863.AC.101
LFA 863 TAB SS K600 stainless steel internal code 863.AS.101
LFA 863 TAB K600 steel 152.4 2.60
LFA 863 TAB SS K600 stainless steel 152.4 2.60
- Standard shipping lengths = 160 pitches = 10 feet = 3,048 metres.
LFA 963 K325 steel internal code 963.AC.040LFA 963 K450 steel internal code 963.AC.080LFA 963 K600 steel internal code 963.AC.100LFA 963 K750 steel internal code 963.AC.110LFA 963 SS K325 stainless steel internal code 963.AS.040
LFA 963LOW FRICTION ACETAL RESIN
963 SERIES
• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Base roller chain, 19.05 mm - 3/4” pitch.
PRODUCT CODES
LFA 963 SS K450 stainless steel internal code 963.AS.080LFA 963 SS K600 stainless steel internal code 963.AS.100LFA 963 SS K750 stainless steel internal code 963.AS.110
LFA 963 K325 steelLFA 963 K450 steel
LFA 963 K600 steel
LFA 963 K750 steel
82.5114.3152.4190.5
2.102.232.532.68
CHARACTERISTICSWeight
kg/m
LFA 963 SS K325 stainless steel
LFA 963 SS K450 stainless steel
82.5114.3
2.102.23
Width L(mm)
LFA 963 SS K600 stainless steel
LFA 963 SS K750 stainless steel
152.4190.5
2.532.68
- Standard shipping lengths = 160 pitches = 10 feet = 3,048 metres.
Base rollerchain
TRAVEL
TRAVEL
38
12,7 12,7
20
31
113,2
L7,95
7,85
R
102
1843 Sideflexing chains with thermoplastic top plates1843 TAB SERIES
LFA 1843 TAB K125 steel internal code 1843.AC.280LFA 1843 TAB K200 steel internal code 1843.AC.010LFA 1843 TAB K325 steel internal code 1843.AC.041LFA 1843 TAB SS K125 stainless steel internal code 1843.AS.280LFA 1843 TAB SS K200 stainless steel internal code 1843.AS.010LFA 1843 TAB SS K325 stainless steel internal code 1843.AS.041
LFA 1843 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Base roller chain, 12.7 mm - 1/2” pitch.
PRODUCT CODES
LFA 1843 TAB K125 steelLFA 1843 TAB K200 steel
LFA 1843 TAB SS K125 stainless steel
LFA 1843 TAB SS K200 stainless steel
31.850.8
31.850.8
0.740.89
0.740.89
CHARACTERISTICSWeight
kg/mWidth L
(mm)Base roller
chain
254254
LFA 1843 TAB K325 steel 82.5 1.03254254254
LFA 1843 TAB SS K325 stainless steel 82.5 1.03254
Radius R(mm)
- Standard shipping lengths = 240 pitches = 10 feet = 3,048 metres.
TRAVEL
39
1863 Sideflexing chains with thermoplastic top plates1863 TAB SERIES
TRAVEL
LFA 1863 TAB K225 steel internal code 1863.AC.016LFA 1863 TAB SS K225 stainless steel internal code 1863.AS.016
LFA 1863 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Base roller chain, 19.05 mm - 3/4” pitch.
PRODUCT CODES
LFA 1863 TAB K225 steelLFA 1863 TAB SS K225 stainless steel
57.157.1
2.002.00
CHARACTERISTICSWeight
kg/mWidth L
(mm)Base roller
chain
- Standard shipping lengths = 160 pitches = 10 feet = 3,048 metres.
NEW
305
40
LFA 1873 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Base roller chain, 19.05 mm - 3/4” pitch.
LFA 1873 TAB K325 steel internal code 1873.AC.041LFA 1873 TAB K450 steel internal code 1873.AC.081
PRODUCT CODES
LFA 1873 TAB K600 steel internal code 1873.AC.101LFA 1873 TAB K750 steel internal code 1873.AC.111LFA 1873 TAB K1000 steel internal code 1873.AC.121LFA 1873 TAB K1200 steel internal code 1873.AC.131
LFA 1873 TAB K325LFA 1873 TAB K450
82.5114.3
2.102.30
CHARACTERISTICSWidth L(mm)
356356
Radius R(mm)
33.333.3
GC st.(mm)
34.634.6
GC sid.(mm)
Weightkg/m
Width L(mm)
Radius R(mm)
GC st.(mm)
GC sid.(mm)
Weight kg/m
LFA 1873 TAB K600LFA 1873 TAB K750
152.4190.5
2.402.60
457457
33.333.3
34.634.6
LFA 1873 TAB K1000LFA 1873 TAB K1200
254.0304.8
2.803.00
457610
33.333.3
34.634.6
- Standard shipping lengths = 160 pitches = 10 feet = 3,048 metres.
LFA 1873 TAB SS K325 stainless steel internal code 1873.AS.041LFA 1873 TAB SS K450 stainless steel internal code 1873.AS.081
PRODUCT CODES
LFA 1873 TAB SS K600 stainless steel internal code 1873.AS.101LFA 1873 TAB SS K750 stainless steel internal code 1873.AS.111LFA 1873 TAB SS K1000 stainless steel internal code 1873.AS.121LFA 1873 TAB SS K1200 stainless steel internal code 1873.AS.131
LFA 1873 TAB SS K325LFA 1873 TAB SS K450
CHARACTERISTICS
LFA 1873 TAB SS K600LFA 1873 TAB SS K750LFA 1873 TAB SS K1000LFA 1873 TAB SS K1200
82.5114.3152.4190.5254.0304.8
2.102.302.402.602.803.00
356356457457457610
33.333.333.333.333.333.3
34.634.634.634.634.634.6
TRAVEL
1873 Sideflexing chains with thermoplastic top plates1873 TAB SERIES
41
Thermoplastic straight running chains with rubber insertsSingle hingeHFL 820 SERIES
HFL 820 K325* internal code G.6.10.040HFL 820 K350* internal code G.6.10.060HFL 820 K400* internal code G.6.10.070HFL 820 K450* internal code G.6.10.080HFL 820 K600* internal code G.6.10.100
HFL 820HIGH FRICTION LINK• Plates in self-lubricating acetal resin, light brown-coloured, with a rubber insert.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
PRODUCT CODES
HFL 820 K325*HFL 820 K350*HFL 820 K400*HFL 820 K450*
88.9101.6114.3
0.830.870.951.03
CHARACTERISTICSWeight
kg/m
HFL 820 K600* 152.4
88.9101.6114.3135.0 1.25
- Inserts: rubber 60 shore A (grey).* Size produced only upon request. Delivery conditions and terms to be agreed.- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- Special configurations of distance between inserts are available upon request.
Delivery conditions and terms to be agreed.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
82.5 65.0
TRAVEL
B(mm)
Width L(mm)
42
Thermoplastic straight running chains with rubber insertsDouble hingeHFL 821 SERIES
HFL 821 K750* internal code G.6.14.110HFL 821 K1000* internal code G.6.14.120HFL 821 K1200* internal code G.6.14.130
HFL 821HIGH FRICTION LINK• Plates in self-lubricating acetal resin, light brown-coloured, with a rubber insert.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
PRODUCT CODES
HFL 821 K750*HFL 821 K1000*HFL 821 K1200*
190.5254.0304.8
2.502.953.25
CHARACTERISTICSWeight
kg/m
132.0195.0245.0
- Inserts: rubber 60 shore A (grey).* Size produced only upon request. Delivery conditions and terms to be agreed.- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- Special configurations of distance between inserts are available upon request.
Delivery conditions and terms to be agreed.- These chains can be supplied with pins in austenitic stainless steel, work
hardened, highly wear resistant.
TRAVEL
B(mm)
Width L(mm)
43
Thermoplastic sideflexing chains with rubber insertsHFL 880 TAB SERIES
HFL 880 TABHIGH FRICTION LINK• Plates in self-lubricating acetal resin, light brown coloured, with a rubber insert.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
HFL 880 TAB K325* internal code G.6.12.041HFL 880 TAB K450* internal code G.6.12.081
HFL 880 TAB K325*HFL 880 TAB K450*
CHARACTERISTICS
- Inserts: rubber 60 shore A (grey).* Size produced only upon request. Delivery conditions and terms to be agreed.- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- Special configurations of distance between inserts are available upon request.
Delivery conditions and terms to be agreed.- These chains can be supplied either with pins in austenitic stainless steel, work
hardened, highly wear resistant, or with pins in thermoplastic resin.
82.5114.3
65.095.0
0.941.08
400400
R(mm)
4646
GC str.(mm)
44.244.2
GC sid.(mm)
Weightkg/m
PRODUCT CODES
TRAVEL
B(mm)
Width L(mm)
44HFL 882 TAB K1000*HFL 882 TAB K1200*
- Inserts: rubber 60 shore A (grey).* Size produced only upon request. Delivery conditions and terms to be agreed.- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- Special configurations of distance between inserts are available upon request.
Delivery conditions and terms to be agreed.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
254.0304.8
195.0246.0
2.873.41
610610
6060
5858
HFL 880 BOHIGH FRICTION LINK• Plates in self-lubricating acetal resin, light brown-coloured, with a rubber
insert.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
HFL 880 BO K325* internal code G.6.19.040
HFL 880 BO K325*
CHARACTERISTICS
- Inserts: rubber 60 shore A (grey).* Size produced only upon request. Delivery conditions and terms to be agreed.- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- Special configurations of distance between inserts are available upon request.
Delivery conditions and terms to be agreed.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
82.5 65.0 0.96
Width L(mm)
190
R(mm)
46
GC st.(mm)
44.2
GC sid.(mm)
Weight kg/m
PRODUCT CODES
HFL 878 BOHIGH FRICTION LINK• Plates in self-lubricating acetal resin, light brown-coloured, with a rubber
insert.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
HFL 878 BO K325* internal code G.6.17.041HFL 878 BO K450* internal code G.6.17.081
HFL 878 BO K325*HFL 878 BO K450*
CHARACTERISTICS
- Inserts: rubber 60 shore A (grey).* Size produced only upon request. Delivery conditions and terms to be agreed.- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- Special configurations of distance between inserts are available upon request.
Delivery conditions and terms to be agreed.- These chains can be supplied either with pins in austenitic stainless steel,
work hardened, highly wear resistant, or with pins in thermoplastic resin.
82.5114.3
71.0102.0
1.081.20
Width L(mm)
190190
R(mm)
4646
GC st.(mm)
44.244.2
GC sid.(mm)
Weight kg/m
PRODUCT CODES
HFL 882 TAB K1000* internal code G.6.15.121HFL 882 TAB K1200* internal code G.6.15.131
HFL 882 TAB K750*
CHARACTERISTICS
190.5 132.0 2.43
Width L(mm)
B(mm)
B(mm)
B(mm)
610
R(mm)
60
GC st.(mm)
58
GC sid.(mm)
Weight kg/m
HFL 882 TABHIGH FRICTION LINK• Plates in self-lubricating acetal resin, light brown-coloured, with a rubber
insert.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.
HFL 882 TAB K750* internal code G.6.15.111PRODUCT CODES
TRAVEL
TRAVEL
TRAVEL
45
1873 Sideflexing chains with thermoplastic top platesand rubber insertsHFL 1873 TAB SERIES
HFL 1873 TABHIGH FRICTION LINK• Plates in self-lubricating acetal resin, light brown-coloured, with a rubber insert.• Base roller chain, 19.05 mm - 3/4” pitch.
PRODUCT CODES
- Inserts: rubber 60 shore A (grey).- Standard shipping lengths = 160 pitches = 10 feet = 3,048 metres.- Special configurations of distance between inserts are available upon request.
Delivery conditions and terms to be agreed.
PRODUCT CODES
TRAVEL
HFL 1873 TAB K750 steel internal code G.1873.AC.111
CHARACTERISTICSWidth L(mm)
R(mm)
GC st.(mm)
GC sid.(mm)
Weightkg/m
R(mm)
GC st.(mm)
GC sid.(mm)
HFL 1873 TAB K1000 steel internal code G.1873.AC.121HFL 1873 TAB K1200 steel internal code G.1873.AC.131
HFL 1873 TAB SS K750 stainless steel internal code G.1873.AS.111
CHARACTERISTICSWidth L(mm)
B(mm)
B(mm)
Weightkg/m
HFL 1873 TAB SS K1000 stainless steel internal code G.1873.AS.121HFL 1873 TAB SS K1200 stainless steel internal code G.1873.AS.131
HFL 1873 TAB K750 190.5 3.10457 33.3 34.6 132.0HFL 1873 TAB K1000HFL 1873 TAB K1200
254.0304.8
3.403.60
457457
33.333.3
34.634.6
195.0245.0
HFL 1873 TAB SS K750 190.5 3.10457 33.3 34.6 132.0HFL 1873 TAB SS K1000HFL 1873 TAB SS K1200
254.0304.8
3.403.60
457457
33.333.3
34.634.6
195.0245.0
46
Biplanar thermoplastic chains
1700LOW FRICTION ACETAL RESIN
1700 / 1700 TAB SERIES
• Plates in self-lubricating low friction acetal resin.• Pins in austenitic chrome-nickel stainless steel, work hardened for high resistance.
WLF 1700 white colour internal code 1700.WA
WLF 1700 white colour
CHARACTERISTICS
PRODUCT CODES
1.26140
Radius R(mm)
58
GC st.(mm)
58
GC sid.(mm)
Weightkg/m
LFA 1700 TAB light brown colour
- Standard shipping lengths = 122 pitches = 20 feet = 6,10 metres.
1.30140 58 58
TRAVEL
TRAVEL
WLF 1700 TAB
WLF 1700
LFA 1700 light brown colour
- Standard shipping lengths = 122 pitches = 20 feet = 6,10 metres.
1.26140 58 58
WLF 1700 TAB white colour
CHARACTERISTICS
1.30140
Raggio R(mm)
58
GC st.(mm)
58
GC sid.(mm)
Weightkg/m
LFA 1700 light brown colour internal code 1700.LFA
1700 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin.• Pins in austenitic chrome-nickel stainless steel, work hardened for high resistance.
WLF 1700 TAB white colour internal code 1700TAB.WAPRODUCT CODES
LFA 1700 TAB light brown colour internal code 1700TAB.LFA
52,4 GC58,4
8
50
25
39
8
50
25
3,9
8
GC
R
53,3 55 66,7
19
R
47
WLF 1701 TABLOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, white-coloured.• Pins in austenitic chrome-nickel stainless steel, work hardened for high
resistance.
WLF 1701 TAB internal code 1701.TAB.WA
WLF 1701 TAB
CHARACTERISTICS
* If R > 500, GC = 55- Standard shipping lengths = 122 pitches = 20 feet = 6,10 metres.
PRODUCT CODES
1.50150
Radius R(mm)
57.5
GC st.(mm)
56.0
GC sid.(mm)
Weightkg/m
WLF 1701 internal code 1701.WA
WLF 1701
CHARACTERISTICS
- Standard shipping lengths = 122 pitches = 20 feet = 6,10 metres.
PRODUCT CODES
1.50150
Radius R(mm)
62
GC st.(mm)
60.3
GC sid.(mm)
Weightkg/m
Biplanar thermoplastic chains
WLF 1701LOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, white-coloured.• Pins in austenitic chrome-nickel stainless steel, work hardened for high
resistance.
TRAVEL
TRAVEL
48
Rd min. = 50
GC
12,7
R
53,2
4,8
50 82°
25
R
G
50
53,3
25
8 4
WLF 1702LOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, white-coloured.• Pins in austenitic chrome-nickel stainless steel, work hardened for high
resistance.
WLF 1702 internal code 1702.WA
WLF 1702
CHARACTERISTICS
- Standard shipping lengths = 122 pitches = 20 feet = 6,10 metres.
PRODUCT CODES
1.43140
Radius R(mm)
59.5
GC st.(mm)
56.8
GC sid.(mm)
Weightkg/m
Biplanar thermoplastic chains
TRAVEL
Curve
Straight
WLF 1703LOW FRICTION ACETAL RESIN• Plates in self-lubricating low friction acetal resin, white-coloured.• The open design ensures optimum cleaning possibilities.• Pins in austenitic chrome-nickel stainless steel, work hardened for high
resistance.
WLF 1703 internal code 1703.WA
WLF 1703
CHARACTERISTICS
- Standard shipping lengths = 122 pitches = 20 feet = 6,10 metres.
PRODUCT CODES
1.43150
Radius R(mm)
58.7
GC st.(mm)
56.9
GC sid.(mm)
Weightkg/m
TRAVEL
49
R=600
mm
R= 600 mmR= 600 mm
R=600
mm
HB
HB
J
G
Case conveyor chainsD 600 / D 600 C SERIES
D 600 - D 600 TABACETAL RESIN• Plates in self-lubricating acetal resin, white-coloured.• Pins in austenitic chrome-nickel stainless steel, work hardened for high resistance.
D 600 internal code 600.DD 600 TAB internal code 600.TAB.D
D 600D 600 TAB
11.011.0
CHARACTERISTICSDiam. E
(mm)
4343
L(mm)
63.563.5
Pitch(mm)
H(mm)
J(mm)
G(mm)
Weightkg/m
B(mm)
- Standard shipping lengths 96 pitches = 20 feet = 6,096 metres.
PRODUCT CODES
D 600 C - D 600 TAB CACETAL RESIN
D 600 C - D 600 TAB C
• Plates in self-lubricating acetal resin, white-coloured.• Pins in austenitic chrome-nickel stainless steel, work hardened for high resistance.
D 600 C internal code 600.D.CD 600 TAB C internal code 600.TAB.D.C
D 600 CD 600 TAB C
11.011.0
CHARACTERISTICSDiam. E
(mm)
4343
L(mm)
63.563.5
Pitch(mm)
H(mm)
J(mm)
G(mm)
Weightkg/m
B(mm)
- Standard shipping lengths 96 pitches = 20 feet = 6,096 metres.
PRODUCT CODES
D 600 - D 600 TAB
TRAVEL
TRAVEL
TRAVEL TRAVEL
1.4428.528.5
-54
-18.018.0 1.49
1.421.55
28.528.5
-54
-18.018.0
14
14
50
H H
J
R= 660 mm
R= 660 mm
GD 1400 - D 1400 TAB
D 1400 SERIES
D 1400 - D 1400 TABACETAL RESIN• Plates in self-lubricating acetal resin, white coloured.• Pins in austenitic chrome-nickel stainless steel, work hardened for high resistance.
D 1400 internal code 1400.DD 1400 TAB internal code 1400.TAB.D
CHARACTERISTICSDiam. E
(mm)L
(mm)Pitch P(mm)
H(mm)
J(mm)
G(mm)
Weightkg/m
- Standard shipping lengths 74 pitches = 20 feet = 6,105 metres.
PRODUCT CODES
Case conveyor chains
TRAVEL TRAVEL
D 1400D 1400 TAB
9.59.5
1.442.26
5050
82.582.5
38.538.5
-66.0
-19.25
The
indi
cate
dda
taar
eap
poxi
mat
eas
the
corr
osio
nre
sista
nce
ofth
epl
astic
mat
eria
ls,ac
cord
ing
toth
eco
nditi
ons
ofus
e,is
rela
ted
tow
orki
ngte
mpe
ratu
res,
the
conc
entra
tion
ofth
ech
emic
alag
ent,
the
dura
tion
ofth
eco
ntac
twith
it,et
c.
CHEMICAL AGENT
Acetic acidAcetoneAluminium chlorideAmmoniaAmmonium chlorideAmyl alcoholAnilineBeerBenzeneBenzoic acidBenzolBoric acidBrineButterButyl alcoholButyric acidCalcium chlorideCarbon disulphideCarbon tetrachlorideCheeseChlorine waterChloroformCitric acidCopper sulphateDiet oilDiet fatDistilled waterEthyl acetateEthyl alcoholEthyl chlorideEthyl etherFlax oilFormaldehydeFormic acidFreon 12Fresh waterFruit juiceGasolineGlycerineHydrochloric acidHydrofluoric acidHydrogen peroxideIodineIron chlorideLactid acidMagnesium chlorideMercuryMethyl alcoholMethylene chlorideMilkNitric acidOilOil etherOleic acidParaffinPhenolPhosphoric acidPotassium hydroxineSea waterSilicone oilSilver nitrateSoapy waterSodium carbonateSodium chlorideSodium hydroxineSodium hypochloriteSodium silicateSodium sulphateSoft drinksSudsSulfuric acidTartaric acidTetrarlineTincture of iodineTransformer oilTrichlorethyleneTurpentineVegetable juiceVegetable oilVinegarWhiskeyWineXilolZinc chloride
ACETALRESIN
Do
oo
•
o
•
oo•
••
••••
••••••
••
••
o
o••o
••••o
••
••
••
o
•o
••
oo•
••
o••
••
••••
o•
oo
o
•
oo
o
o o o •
•• •• ••oo
o
••• •• ••
oo
•
••
••
•
••
• • •••••
••••
••••
••••
••••
••••
••••
••••••
••••••
••
••••
••••
••••
••oo
o
o
••••
••••••
••
••
o
o••o
••••o
••
••
••
o
•o
••
oo•
••
o••
••
••••
••
••••••
••
••••••••
••••••
••••••
ooo
ooo
oo
oo
o ooo
oo
o o o
o o o
o o oo o o
ooo
oo
oooo-
oo
ooo
o
ooo
o
o
o
o
ooo
ooo
ooo
o
o
oo
oo
oo
••o
••••••
••••o
••
••
••
•o
••
oo
oo
oo
o o o
oo
oo
ooo
o o o
oo o
o
o
•
••
••
••
o o o
••••
•• •• ••
•• •• ••
ACETALRESIN
ACETALRESIN
LFA/WLF SP/AK
ANTISTATIC RESIN
•••••••••••••••••••••
••••••
oo---
••••
••••
••
••••
••••
••
••••
••••••••
••••
••••
••••
••
••••••••••••••••
••
••••••
••••
••••••
••••••
••••••••
••••
••••
••••
••
••••
••
••••••••••••••
POLYPROPYLENEPPB••••
••
••••••
••
••••
••
••
••
••••••••
•••
••••••••••••o
o
o
••
•o
o
o
••••
••
••••••••
••••
••••
••••
••••••••••••••
•••••••
•••••
••••
•
•••••
••••••••••
•••••• ••
••••o
o
••••
••••
••
••••o
••
••
••
••
••••
o
o•o
o
o
oo
o
o-
•••••
o
••••
••••
••
•••••
••
••••
••••••••
••
o
••o
••oo
••o
••
••
o•
••
••••
•
••
••••••••••••
ASA
D
E
C
B
F
G
H
I
LM
NO
P
S
T
V
W
XZ
Plastic corrosion resistance table
51
Legendo = Little resistance, not recommended
= Good resistance, it can be used= Average resistance•
••
POLYAMIDECOMPOSITE
WRXo
52graphic project: signal lost / london
MAGRIS s.r.l.via Vanizza 10 (z.i. Sarano) 31025 S. Lucia di Piave TV - Italytel +39 0438 460226 / fax +39 0438 701843e-mail magris@magris.comwww.magris.com