Post on 16-Mar-2020
Parrot AR.Drone 2.0 Propeller and GearReplacement
Use this guide to replace, propellers, shafts, and gears on a Parrot AR.Drone 2.0.
Written By: David Hoyt
Parrot AR.Drone 2.0 Propeller and Gear Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4
INTRODUCTION
Use this guide to replace, propellers, shafts, and gears on a Parrot AR.Drone 2.0.
AR.Drone 2.0 spare parts and mounting tools are available from several Parrot retailers.
[video: http://youtu.be/Qx01V37QbnY]
TOOLS:iFixit Opening Tools (1)
Parrot AR.Drone 2.0 Propeller and Gear Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 4
Step 1 — Propeller and Gear
Remove the foam body.
Step 2
Disconnect the battery by pulling the two red wires apart.
Remove the battery by releasing the battery retaining straps.
Parrot AR.Drone 2.0 Propeller and Gear Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 4
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2017-07-17 10:49:48 AM.
Step 3
Remove the small retaining clipusing a plastic opening tool.
Be careful as these clips can fly offand can be difficult to find.
Step 4
The propeller, gear, and rod can be removed by simply lifting them off the motor.
Parrot AR.Drone 2.0 Propeller and Gear Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 4