2MNPT

2 7/8"(73)

H

OPT DISCHARGEPIPE ASSEMBLY

11 1/8"(282)

3 7/16" (CPVC)(87)2 5/8 (PP)(67)

1"

14 1/8"(359)

3FNPT

3/4FNPT

2MNPT

8 1/4"(210)

9 3/4"(248)

BOTTOM VIEW

20"(508)

17 7/8"(454)

7 1/2"( 191)

8"(204)

15"(381)

Ø13"(330)

ROTATION

10"(254)

Min Level

Voltage HP (kW) Dimensions: in. (mm)

H 208-230/460/3/60

3450 rpm 7.5 (5.5)

10/15 (7.5/11) 15-5/16 (389) 18-3/8 (467)

208-230/460/3/60 1725 rpm 7.5 (5.5) 15-9/16 (395)

220/380/440/3/50 190/380/3/50

2850 rpm

7.5 (5.5) 10/15 (7.5/11)

15-9/16 (395) 18-3/8 (467)

220/380/440/3/50 1450 rpm 7.5 (5.5) 15-9/16 (395)

Dimensions are for reference only. * Motor dimensions will vary with motor manufacturer.

GPM

LPM

0

20

40

5

10

15

20

25

30

35

40

60

80

100

120

140

160

180

200FTM

TDH

50Hz

60Hz

43

21

65 2

54

10

15

6

8

10

50Hz60HzHP

50 Hz only

6

4

3

2

5

1

200 400 600 800 1000 1200

500 100 100 200 250 300 350 400

400 U.S. GPM or 170 ft. TDH @ 60Hz

Non-metallic solution contactHigh-temp PP, CPVC, or PVDF(See chemical resistance guide T-102)

Centrifugal Quiet & vibration free.

Chemical Duty Motor (7.5-15.0 Hp.)Sealed oversized bearings,cast iron end bells, corrosion resistant two -part coating, & stainless steel nameplate. PTFE shaft vapor seal

Protects motor bearing from atmosphere

In or out-of-tank

Can run dry indefin

itely

Pu

mp has no bearings

SERIES 'EF' | VERTICAL PUMPS

Chemical resistant pumps & filters engineered for industry

®

EMAIL: SALES@SERFILCO.COMPH: (800) 323-5431 SERFILCO.COM

BULLETINP-316_G04/09/18

Page 1 of 2

PH: (800) 323-5431 EMAIL:SALES@SERFILCO.COM SERFILCO.COM

BULLETIN P-316_G 04/09/18

Page 2 of 2 Series 'EF' | Vertical Pumps

Order Information For standard pump-motor combination, select model from table below.

Select flow curve number providing the desired performance, then match to Model # listed below.

Standard models include: EPDM elastomers (CPVC or PP) & Viton (PVDF).

Motor HP is non-overloading at full capacity for S.G. of 1.0.

Standard 60 Hz models

Flow

Curve

Model # PCN

Model # PCN

Model # PCN

CPVC PP PVDF

1 EF3x2-1SC-D7.5 45-2011 EFP3x2-1SC-D7.5 45-2211 EFK3x2-1SC-D7.5 45-2411

2 EF3x2-2SC-D10.0 45-2022 EFP3x2-2SC-D10.0 45-2222 EFK3x2-2SC-D10.0 45-2422

3 EF3x2-3SC-D15.0 45-2033 EFP3x2-3SC-D15.0 45-2233 EFK3x2-3SC-D15.0 45-2433

5 EF3x2-5SC-H7.5 45-2054 EFP3x2-5SC-H7.5 45-2254 EFK3x2-5SC-H7.5 45-2454

6 EF3x2-6SC-D7.5 45-2061 EFP3x2-6SC-D7.5 45-2261 EFK3x2-6SC-D7.5 45-2461

Standard 50 Hz models

1 EF3x2-1SC-D7.5-50 45-2015 EFP3x2-1SC-D7.5-50 45-2215 EFK3x2-1SC-D7.5-50 45-2415

2 EF3x2-2SC-D7.5-50 45-2025 EFP3x2-2SC-D7.5-50 45-2225 EFK3x2-2SC-D7.5-50 45-2425

3 EF3x2-3SC-D10.0-50 45-2036 EFP3x2-3SC-D10.0-50 45-2236 EFK3x2-3SC-D10.0-50 45-2436

4 EF3x2-4SC-D10.0-50 45-2046 EFP3x2-4SC-D10.0-50 45-2246 EFK3x2-4SC-D10.0-50 45-2446

5 EF3x2-5SC-H7.5-50 45-2057 EFP3x2-5SC-H7.5-50 45-2257 EFK3x2-5SC-H7.5-50 45-2457

6 EF3x2-6SC-D7.5-50 45-2065 EFP3x2-6SC-D7.5-50 45-2265 EFK3x2-6SC-D7.5-50 45-2465

* For custom pump-motor combinations please consult Serfilco sales department. (800) 323-5431

Options

Description Add Suffix to Model

Add to PCN

Viton 'O'-rings installed: CPVC or PP pumps EPDM 'O'-rings: PVDF pumps

-V -L

-V -L

PVDF impeller & shaft sleeve: CPVC pump

For continuous operation above 180 F -K -K

Discharge hole in mounting plate -MPH -H

Alternate discharge location to match EHM2 -EHM -M

Description

CPVC PP PVDF

Add Suffix

To Model

Use Separate

PCN

Add Suffix

To Model

Use Separate

PCN

Add Suffix

To Model

Use Separate

PCN

Discharge pipe assembly -DPA 45-1202 -DPAP 45-1202-PP -DPAK 45-1202-K

Suction strainer Included Included -STK 45-1203-K

Suction extension w/ strainer 12" -K12 46-0081 K-12P 46-0081-PP -K12K 46-0081-K

24" -K24 46-0082 K-24P 46-0082-PP -K24K 46-0082-K

36" -K36 46-0083 K-36P 46-0083-PP -K36K 46-0083-K