Post on 11-Nov-2018
ORDERS AND INQUIRIES
Contact your Belshaw Adamatic distributor, or email info@belshaw.com.
PRODUCT INFORMATION www.belshaw.com
BELSHAW ADAMATIC BAKERY GROUP • 814 44TH ST NW, SUITE 103, AUBURN, WA 98001 USA • info@belshaw.com
International
T H E S O U R C E F O R D O N U T P R O D U C T I O N
Nº1
When Placing an Equipment Order...
Thank you ! – the customer service team at Belshaw Adamatic Bakery Group
2 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
...Please specify the following!
Item Number1. Model2. Description3. Volts, Hertz, Phase4. Other options5.
Example 2: Item Nbr 212671. Model 718LCG2. Donut Fryer3. 220 Volts, 50/60hz, 1phase4. Liquid Propane option5.
Example 1: Item Nbr 200121. Model HI18F2. Floor Standing Icer3. 240 Volts, 50/60hz, 1phase4. (no other options)5.
3ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
INDEXINDEX 2012 Product Guide (International models)
Floor Model Fryers (Gas • Electric)
Cake Donut Depositors Type B • F • N
Insider Ventless Shortening Filters
Proofer Glazers Icers
Snack Master Thermoglaze 25 • 50
Donut and Pastry Cutters
Plungers for Type B • F
Type K Depositors Pancake • Donut
616B • Cut-N-Fry Donut Robot®
4-7
20/22
18 24
26 26 27
18 19
28
21 23
8-9 10-17
4 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
FLOOR MODEL GAS FRYERS
724CG Donut Fryer with Type F Cake Donut depositor, submerger, and EZMelt options
21268 718LCG Donut Fryer
Screens and submergers – see Accessories
Floor Model Gas FryersThe 700 series gas-heated floor model fryers are designed to efficiently produce high quality donuts. Belshaw Adamatic’s ‘Controlled Combustion’ burner tube technology generates savings throughout the life of the fryer. All fryers easily acco-modate Type B and Type F cake donut depositors, a sub-merger system, and a choice of standard ‘SF’ model or EZ Melt shortening filters.
Electronic ignition (requires 120V/240V power supply)• Specify drain tray on left or right side. If not specified, the • drain tray will be on right.2 nickel plated cake donut frying screens with bolt-on heat • dissipating handlesAdjustable, bolt down legs• Exterior drain valve control• Options: • Submerger, extra screens, screen cradle, kosher package with standing pilot and no voltage required
718LCGFloor Model Gas Fryer, electronic ignition, frying area 17” x 25” (46cm x 66cm), 44,000 BTU, electronic ignition, shortening capacity 94lbs (43kg), holds 24 standard donuts, production approx 65-80 dozen donuts per hour, with drain tray, 2 nickel plated screens w/handles, exterior drain valve control, ETL listed.
Options include: Specify Natural Gas or Liquid Propane (a conversion kit is • required for changeover)Specify voltage as below• Specify drain tray on left or right side. If not specified, the • drain tray will be on rightProofing and frying screens (order separately, listed on • following pages)Submerger (order separately, listed on following pages)• Standing pilot models with no voltage required•
21268 NG, 220V, 50/60hz,1ph
21267 LP, 220V, 50/60hz, 1ph
21269 NG, standing pilot, no electric power required
21270 LP, standing pilot, no electric power required
5ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
FLOOR MODEL GAS FRYERS
724CGFloor Model Gas Fryer, electronic ignition, frying area 24” x 24” (61cm x 61cm), 66,000 BTU, electronic ignition, shortening capacity 106bs (48kg), holds 36 standard donuts, production approx 80-100 dozen donuts per hour, with drain tray, 2 nickel plated screens w/handles, exterior drain valve control, ETL listed.
Options include: Specify Natural Gas or Liquid Propane (a conversion kit is required • for changeover)Specify voltage as below• Specify drain tray on left or right side. If not specified, the drain tray • will be on rightProofing and frying screens (order separately, listed on following • page)Submerger (order separately, listed on following page)• Standing pilot models with no voltage required•
21282 LP, 220V, 50/60hz, 1ph
21271 NG, standing pilot, no voltage required
21272 LP, standing pilot, no voltage required
734CGFloor Model Gas Fryer, electronic ignition, frying area 34” x 24” (86cm x 61cm), 89,000 BTU, Capacity 195lbs (88kg), holds 48 standard donuts, production approx 130-150 dozen donuts per hour, with drain tray, 2 nickel plated screens w/handles, exterior drain valve control, ETL listed.
Options include: Specify Natural Gas or Liquid Propane (a conversion kit is required • for changeover)Specify voltage as below• Specify drain tray on left or right side. If not specified, the drain tray • will be on rightProofing and frying screens (order separately, listed on following • pages)Submerger (order separately, listed on following pages)• Standing pilot models with no voltage required•
21278 NG, 220V, 50hz,1ph
21283 LP, 220V, 50hz, 1ph
21274 NG, standing pilot, no voltage required
21275 LP, standing pilot, no voltage required
21282 724CG Donut Fryer
21278 734CG Donut Fryer
6 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Floor Model Electric FryersBelshaw’s floor model electric fryers produce high-quality donuts with low operating costs. The heavy duty elements and other components are designed to give years of service. All fryers easily accomodate accessories such as Type B and Type F depositors, submergers, and a choice of standard ‘SF’ model or EZ Melt shortening filters.
Specify drain tray on left or right side. If not specified, the • drain tray will be on right.Heavy duty elements, tiltable upwards for easy kettle • cleanup2 nickel plated cake donut frying screens with bolt-on • handlesAdjustable, bolt down legs• Exterior drain valve control• Options: Submerger, extra screens, screen cradle•
618LFloor Model Electric Donut Fryer, frying area 17” x 25” (46cm x 66cm), shortening capacity 83 lbs (38kg), holds 24 stan-dard donuts, capacity approx 80-100 dozen per hour, with drain tray, (2) nickel plated screens w/handles, exterior drain valve control, ETL listed.
Options include: Specify voltage, as below• Specify drain tray on left or right side. If not specified, the • drain tray will be on rightProofing and frying screens (order separately, listed on • preceding page)Submerger (order separately from list on preceding page)•
21284 380/415V, 50/60Hz, 3ph
624Floor Model Electric Donut Fryer, frying area 24” x 24” (61cm x 61cm), shortening capacity 97 lbs (44kg), holds 36 standard donuts, capacity approx 65-80 dozen per hour, with drain tray, (2) nickel plated screens w/handles, exterior drain valve control, ETL listed.
Options include: Specify voltage, as below• Specify drain tray on left or right side. If not specified, the • drain tray will be on rightProofing and frying screens (order separately, listed on • preceding page)Submerger (order separately from list on preceding page)•
21257 208/240V, 50/60Hz, 1ph
21259 208/240V, 50/60Hz, 3ph
21285 380/415V, 50/60Hz, 3ph
21259 624 Donut Fryer B0001000 Type B Cake Donut depositor
0405 Column Mount 624-1521 Submerger
21284 618L Donut Fryer
21257 624 Donut Fryer
FLOOR MODEL ELECTRIC FRYERS
7ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
ACCESSORIES FOR FLOOR MODEL FRYERS
Screens and Submergers for Floor Model Fryers (Gas and Electric)Frying ScreensScreens with bolt-on handles. These are for cake donuts only. (Two screens are supplied standard with each new floor model fryer).
618L-0007 Frying screen for cake donuts, with bolt-on handles, for 618L/718L fryers, 17" x 25"
624-0007 Frying screen for cake donuts, with bolt-on handles, for 624/724 fryers, 23" x 23"
634-1058 Frying screen for cake donuts, with bolt-on handles, for 734 fryers, 23" x 33"
Proofing and Frying ScreensScreens without handles, so they can be easily placed into a baking rack for proofing donuts. After proofing, the screens are placed in the fryer either with detachable handles, or with a Screen Cradle (see below). 10 or more of these screens are normally needed for yeast raised donut production.
618-0007A Proofing and frying screen for raised donuts, without handles, for 618/618L/718L fryers, 17" x 25"
624-0007A Proofing and frying screen for raised donuts, without handles, for 624/724 fryers, 23" x 23"
634-0013A Proofing and frying screen for raised donuts, without handles, for 734 fryers, 23" x 33"
Screen CradleThe easiest way to raise and lower Proofing and Frying Screens in a donut fryer.
618L-1037 Screen cradle for 618L, 718L fryers, 17" x 25"
624-1037 Screen cradle for 624, 724 fryers, 23" x 23"
634-1037 Screen cradle for 734 fryers, 23" x 33"
Detachable Screen HandlesUse to pick up Proofing And Frying Screens
616-0007C (1) Detachable handle for Belshaw proofing and frying screens. Two handles are required for each screen.
SubmergersUsed when frying ball shaped donuts, any other ball shaped products, such as Loukoumades or Hushpuppies, or any product that can be submerged without affecting quality. Important: for fryers purchased before March 2011, different kits are needed (contact Parts Dept)
618L-1521 Submerger for 618L fryer
624-1521 Submerger for 624 fryer
718LG-1541 Submerger for 718LG fryer
724G-1547 Submerger for 724G fryer
734G-1536 Submerger for 734G fryer
624-0007 Frying Screen
624-0007A Proofing / Frying screen
624-1037 Screen Cradle , shown alone (above) and with screen (below)
616-0007C Detachable screen handles (2)
624-1521 Submerger (shown with 624 fryer)
8 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
TABLETOP FRYERS • 616B • CUT-N-FRY
8848014 616B Donut Fryer with cake donuts
8848015 616B Donut Fryer with raised donuts
Cut-N-Fry (616B fryer with Type N depositor and mounting system)
616B Fryer • Cut-N-Fry for DonutsBelshaw’s 616B is a 16” x 16” donut fryer that occupies under 3 square feet (1 sq. m) of counter space and weighs only 44lbs. (20kg) empty. At a maximum capacity of 16 average size donuts and approx. 35 dozen/hour, it offers the best possible use of space for the amount that it produces. The 616B can be used for cake or yeast raised donuts. (10 or more screens are normally used for yeast-raised donuts)
The “Cut-N-Fry” is a 616B fryer combined with a Type N depositor, with kits for Donut, Hushpuppy and Loukoumades production.Fryer cover doubles as a drain tray which can be placed on left or right side as needed (no need to specify)• 2 nickel plated cake donut frying screens with bolt-on heat • dissipating handles suppliedNo drain. Filter-Flo Siphon can be used to drain and filter shortening. • Fryer kettle is removable. • Options: Submerger, extra screens•
616B Fryer16” x 16” fryer, holds 16 standard donuts, suitable for cake or raised donuts, with 2 frying screens with handles, drain tray/cover, holds 55 lbs shortening, production rate approximately 35 dozen/hour, NSF-4 listed.
Options include: Specify voltage as below• Proofing and frying screens (order separately, listed on fol-• lowing page)Submerger (order separately, listed on following page)•
8848014 240V, 50/60Hz, 1ph (CE model)
8848015 240V, 50/60Hz,1ph
8848016 208V, 50/60Hz,1ph
Cut-N-Fry PackageThis can be used as the base model for Cut-N-Fry for Donuts, Hushpuppies and Loukoumades. Package includes:
616B Fryer model • 8848014 above Type N Depositor • N20000 (see Cake Donut Depositors sec-tion of this book)Short arm mounting kit • N-1033 (see Cake Donut Depositors)Package does not include plunger or cylinder, • must order separately. (See next page)
(The Cut-N-Fry can also be ordered with 616B, Type N and Mounting Kit separately)
26019 Cut-N-Fry Package
Cut-N-Fry (for Donuts)Cut-N-Fry for donuts includes the items below. Order the fol-lowing items separately.
Cut-N-Fry Package • 26019 OR Cut-N-Fry with components ordered separatelyAny size Type N plain plunger (1-3/4” is typical.) See Cake • Donut depositors section, Type N plungers Type N cylinder (same size as plunger). See Cake Donut • depositors section
9ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
616B • CUT-N-FRY • ACCESSORIES
Cut-N-Fry for HushpuppiesCut-N-Fry for Hushpuppies includes a Cut-N-Fry package, plus a ‘Hushpuppy Kit’ which consists of:
2” Hushpuppy Plunger (N-1009BSS-103DB), deposits 3 at a time• 2” Cylinder for Type N• HP-1004 Submerger screen for 616B fryer•
26021 Hushpuppy Kit for Cut-N-Fry
Cut-N-Fry for LoukoumadesCut-N-Fry for Hushpuppies includes a Cut-N-Fry package, plus a ‘Loukou-mades Kit’ which consists of:
2” Loukoumades Plunger (N-1009BSS-103C), deposits 3 at a time• 2” Cylinder for Type N• HP-1004 Submerger screen for 616B fryer•
26020 Loukoumades Kit for Cut-N-Fry
Screens, Submerger and Filter for 616B/Cut-N-Fry
Frying Screens
Screens with bolt-on handles. For cake donuts. 2 screens are supplied stan-dard with each new 616B fryer. (Can also be used for yeast raised donuts, if the handle will fit into your proofer)
616-0512 (1) Frying screen with bolt-on handles, 15” x 15”
Proofing and Frying ScreensScreens without handles, so they can be easily placed into a baking rack for proofing donuts. After proofing, the screens are placed in the fryer with detach-able handles (see below).
616-0007 (1) Proofing and Frying Screen (no handles), 15” x 15”
Filtration
DR42-1048 Filter Flo Siphon (removes and cleans shortening)
DR42-0277DZ Cloth filter cones for Filter Flo, per dozen
Detachable Handles for Proofing and Frying Screens
616-0007C (1 only) Detachable handle for Proofing / Frying Screens
SubmergerThis is a frying screen with spacers to hold it just below the surface of short-ening. Used when frying ball shaped donuts, other round products, or any product that can be submerged without affecting quality.
HP-1004 Submerger screen, upper
Cut-N-Fry for Loukoumades/Hushpuppies
616-0512 Frying Screen
616-0007 Proofing and frying screen
DR42-1048 Filter-Flo Siphon
616-0007C (2) Detachable screen handles
HP-1004 Submerger Screen
10 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Belshaw Adamatic’s Donut Robot® machines deposit, fry, turn, and dispense donuts automatically. Com-pared to traditional frying, donuts are improved while labor is reduced. Training is easy and high quality, repeatable donuts are produced time after time. Both cake and yeast raised donuts can be made on Donut Robot Mark 2 and above; GP models are for mini donuts only.
Donut Robot® Mark 1Automatic fryer with depositor, for standard size cake donuts, with 1-9/16” plunger and hopper, automatic conveyor, 3-3/4” flight bar spac-ing, temperature adjustment dial and 4-speed gear selection, no drain, capacity approx 13 doz/Hr, ETL listed
Options: • Voltage, Plunger type as belowAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon. See Donut Robot accessories sectionCan be used for mini donuts with accessory mini donut hopper and • plunger MK-1502-1 (see Donut Robot accessories).
21604 208/240V/50/1, Plain plunger (CE model)
21606 208/240V/50/1, Star plunger (CE model)
Donut Robot® Mark 1GPAutomatic fryer with depositor, for mini donuts, 1” double plunger and hopper, automatic conveyor, 2-1/4” flight bar spacing, temperature adjustment dial and 4-speed gear selection, capacity approx 74 doz/hr, ETL listed
Options: • Voltage as belowAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon. (See Donut Robot accessories section)Cannot be converted for standard size donuts•
22305 208/240V,50/60hz,1ph, (CE model)
Donut Robot® Mark 2 Automatic fryer with depositor, for standard size cake donuts, 1-9/16” plunger and hopper, automatic conveyor, 3-3/4” flight bar spacing, tem-perature adjustment dial, speed adjustment dial, drain, capacity approx 37 doz/hr., ETL listed
Options: • Voltage, Plunger type as belowAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon, Drain Valve, EZMelt18. See Donut Robot accessories sectionCan be used for mini donuts with accessory mini donut hopper and • plunger MK-1502-1 (see Donut Robot accessories)Using the supplied drain requires Drain Valve accessory. (EZMelt • requires drain valve, Filter Flo does not)Can be used for yeast raised donuts with Feed Table, Trays and • Cloths, (see Donut Robot accessories)
21618 208/240V/50/1, Plain plunger, CE
22126 208/240V/50/1, Star plunger, CE
21611 240V/50/1, Star plunger, Australia/NZ
22071 380/415V/50/3, Plain plunger, CE
21582 380/415V/50/3, Star plunger, CE
21604 Mark 1
22305 Mark 1 GP
21618 Mark 2 (shown with Roto-Cooler accessory)
Other voltages available – contact Belshaw!
DONUT ROBOT® AUTOMATIC FRYERS
11ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Donut Robot® Mark 2 GPAutomatic fryer with depositor, for mini donuts, with 1” double plunger and hopper, automatic conveyor, 3” flight bar spacing, temperature adjustment dial, speed adjustment dial, drain, capacity approx 152 doz/hr, ETL listed
Options:• Voltage as belowAccessories:• Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon, Drain Valve, EZMelt18. See Donut Robot accessories sectionCannot be converted for standard size donuts• Using the supplied drain requires Drain Valve accessory. (EZMelt • requires drain valve, Filter Flo does not)
21998 208/240V/50/1, CE
22417 240V/50/1, Australia/NZ
22016 208/240V/50/3, CE
21635 380/415V/50/3, CE
Donut Robot® Mark 2 Gas Automatic fryer with depositor, for standard size cake donuts, with 1-9/16” plunger and hopper, automatic conveyor, 3-3/4” flight bar spacing, temperature adjustment dial, speed adjustment dial, no drain, 120V power required, capacity approx 37 doz/hr
Options: • Natural Gas(NG)/Propane(LP), Plunger type, VoltsAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon. See Donut Robot accessories sectionCan be used for mini donuts with accessory mini donut hopper • and plunger MK-1502-1 (see Donut Robot accessories)Can be used for yeast raised donuts with Feed Table, Trays and • Cloths, (see Donut Robot accessories)Not CE-listed, or otherwise certified•
22502 120V,50/60hz,1ph, Star plunger, NG
22504 120V,50/60hz,1ph, Plain plunger, LP
22510 208/240V,50/60hz,1ph, Plain plunger, NG
22513 208/240V,50/60hz,1ph, Plain plunger, LP
22512 208/240V,50/60hz,1ph, Star plunger, NG
22506 208/240V,50/60hz,1ph, Star plunger, LP
Donut Robot® Mark 2GP GasAutomatic fryer with depositor, for mini donuts, with 1” double plunger and hopper, automatic conveyor, 3” flight bar spacing, tem-perature adjustment dial, speed adjustment dial, no drain, capacity approx 152 doz/hr
Options:• Natural Gas(NG)/Propane(LP), Plunger type, VoltsAccessories:• Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon. See Donut Robot accessories sectionCannot be converted for standard size donuts• Not certified•
22511 120V,50/60hz,1ph, NG
22503 120V,50/60hz,1ph, LP
22507 208/240V,50/60hz,1ph, LP
21998 Mark 2GP
22502 Mark 2 Gas
22511 Mark 2GP Gas
DONUT ROBOT® AUTOMATIC FRYERS
12 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Donut Robot® Mark 5 Automatic fryer with depositor, for standard size cake donuts, 1-9/16” plunger and hopper, automatic conveyor, 3-3/4” flight bar spacing, temperature adjustment dial, speed adjustment dial, drain, capacity approx 56 doz/hr, ETL listed
Options: • Voltage, Plunger type as belowAccessories: • Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon, Drain Valve, EZMelt18. See Donut Robot accessoriesCan be used for mini donuts with accessory mini donut hopper • and plunger MK-1502-1 (see Donut Robot accessories)Using the supplied drain requires Drain Valve accessory. (EZMelt • requires drain valve, Filter Flo does not)Can be used for yeast raised donuts with Feed Table, Trays and • Cloths (see Donut Robot accessories)
22489 208/240V/50/1, Plain plunger, CE
22041 208/240V/50/1, Star plunger, CE
22240 208/240V/50/3, Plain plunger, CE
22018 208/240V/50/3, Star plunger, CE
22241 380/415V/50/3, Plain plunger, CE
21647 380/415V/50/3, Star plunger, CE
Donut Robot® Mark 5GPAutomatic fryer with depositor, for mini donuts, with 1” double plunger and hopper, automatic conveyor, 3” flight bar spacing, temperature adjustment dial, speed adjustment dial, drain, capacity approx 226 doz/hr, ETL listed
Options:• Voltage as belowAccessories:• Roto Cooler, Shortening Reserve Tank, Filter Flo Siphon, Drain Valve, EZMelt18. See Donut Robot accessoriesCannot be converted for standard size donuts• Using the supplied drain requires Drain Valve accessory. EZMelt • requires drain valve, Filter Flo does not
21657 208/240V/50/1, CE
22017 208/240V/50/3, CE
22317 380/415V/50/3, CE
Donut Robot® Mark 6Donut Robot® fryer with automatic conveyor, for standard size cake or raised donuts, 3-3/4” or 4-1/2” flight bar spacing, temperature adjustment dial, speed adjustment dial, drain, no cake donut deposi-tor, capacity approx 112 doz/hr, ETL listed
Options:• Voltage and flight bar spacing as belowAccessories:• Type F cake donut depositor, Rack Loader, Drain Valve, EZMelt34. See “Donut Robot Mark 6 Accessories” sectionUsing the supplied drain requires Drain Valve accessory• Used as part of a yeast raised donut system with Feed Table, • Trays and Cloths (see Donut Robot Mark 6 Accessories)
21640 208/240V/50/3, 3-3/4” spacing
22443 380/415V/50/3, 4-1/2” spacing, ‘Deep’ model
22489 Mark 5
21657 Mark 5 GP (mini donuts)
21640 Mark 6
22443 Mark 6 (Deep)
DONUT ROBOT® AUTOMATIC FRYERS
13ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
U-1001 Plain plunger
U-1001S Star Plunger
MK-1023x1 Double Mini Donut Plunger
MK-1502-1 Mini Donut Hopper + Plunger
DR42-1018X1.563 Dunkerette attachment
DR42-1017X1.563 Ball attachment
DR42-1016X1.563 Nugget attachment
Plunger Selection for Donut RobotsThese plungers below are compatible with Donut Robots.
Notes:
Hopper and plunger sizes must match. For instance, a 1-9/16’ plunger will not work with a mini donut (‘double miniature’) hopper.
All current plain and star plungers are 1-9/16” in diameter. Some older model Donut Robots may have 1-7/16” or 1-13/16” plungers, which are no longer available. If these plungers need to be replaced, a 1-9/16” hopper will be needed in addition to the 1-9/16” plunger.
Attachments are small add-ons to a plain or star plunger. Donuts produced by the Ball and Nugget attachments can either stick together or separate (as shown at right) depending on the height of the hopper above the shortening.
The plungers on this page fit the Donut Robot depositor only. They will not fit Type B, Type F, or Type N depositors. See the Cake Donut Deposi-tors section for these plungers.
A star plunger is identical to a plain plunger, but with extra ridges on the plunger that create star like ridges on a ring donut. The star plunger normally makes slightly more rounded and consistent shape ring donuts than a plain plunger.
Donut Robot Mark 6 normally uses a Type F depositor. The plungers on this page do not apply to Mark 6 except in cases where the Mark 6 is equipped with a Donut Robot depositor.
U-1001 Plain plunger, 1-9/16” diameter
U-1001S Star plunger, 1-9/16” diameter
MK-1023x1 Double plunger for mini donuts (1” diameter)
MK-1502-1 Mini-donut hopper and 1” double plunger, for Donot Robot® Mark 1, 2 and 5. For machines older than 2001, call factory for compatibility
DR42-1018X1.563 Dunkerette attachment (cuts two), 1-9/16”
DR42-1017X1.563 Ball attachment (cuts four ball shapes), 1-9/16”
DR42-1016X1.563 Nugget attachment (cuts three ball shapes), 1-9/16”
DONUT ROBOT® PLUNGER SELECTION
14 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
EZ Melt 18
H&I-4H&I-2
HG-18C
Shortening Reserve TankFilter-Flo®
Siphon
Fryer
EP18-24
Mark V
Donut Finishing Center
HG-18EZ Easylift
Proofing Tray
Mark II
Gas Mark II
Rack Loader
Roto Cooler
Proofer
Feed Table
Shortening Filter
Feed Table
Fryer Mounting
Table
Glazer Icer
Sugaring Table
Glazing screens
Mark 2/ Mark 5 System
Feed Table Support
Fryer Table
Choosing Accessories for Mark 2 and Mark 5 systemsWith our range of accessories, you can choose what you need, whether it’s for a simple mini donut operation, or a donut shop making both cake and yeast raised donuts. Part numbers are on following page.
Drain w/Valve
Proofing Cloth
ACCESSORIES FOR DONUT ROBOT® MARK 2 – 5
15ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Accessories for Donut Robot® Mark 1, 2 and 5
Collecting And Cooling Donuts
22103 Roto-Cooler with Standard Tray (24”/61cm, white polyethylene). 120V/50/1, plugs into Donut Robot® fryer
86100 Rack Loader, collects donuts onto 17” x 25” screens
Call Rack Loader for Gas Mark 2 and for Mark 6 Deep (tall version)
SL200-0004 (1) Glazing screen for Rack Loader, 17” x 25” (up to 36 recommended)
Shortening Filtration
DR42-1048 Filter Flo Siphon (removes and cleans shortening), QUICKSHIP ITEM
DR42-0277DZ Cloth filter cones for Filter Flo, per dozen
DMM-1004 Shortening Reserve Tank - fits Mark 1
MKV-1012 Shortening Reserve Tank - fits Mark 2, Mark 5, QUICKSHIP ITEM
MK-0557-11.5 Drain valve for Donut Robot fryers (Note: table supporting fryer needs a hole for drain and 16”(41cm) space below), QUICKSHIP ITEM
EZMelt18 Melter-Filter for Mark 2/5. This is the electric powered filtering method recommended by Belshaw. See Filters section
Mini Donut Production Kit
MK-1502-1 Mini-donut hopper and 1” double plunger, for Mark 1, 2 and 5. For machines older than 2001, call factory for compatibility
Yeast-Raised Donut Production (Mark 2 & 5 only)
8352043 Feed Table, for Mark 2 / Mark 5 (plugs into Donut Robot® fryer), CE
FT42-0052 Proofing cloth trays for Mark 2/5 (up to 36 recommended)
FT100-0532 Proofing cloths with rods for Mark 2/5 (up to 36 recommended)
FT42-0516 Splash guard for Mark 2/5 Feed Table
MK6-1007 Support table for Mark 2 Fryer, Roto Cooler, and EZMelt18 Filter
MK6-1005 Support table for Mark 5 Fryer, Rack Loader, and EZMelt18 Filter
FT6-1004 Support table for Mark 2/5 Feed Table
Icers, Glazers, Proofers
See further sections of this catalog
22103 Roto Cooler
86100 Rack Loader w/ SL200-0004 Glazing Screen
DR42-1048 Filter Flo Siphon
MKV-1012 Shortening Reserve Tk.
Drain Valve / EZMelt 18
Mini Donut Kit Feed Table FT Tray and Cloth Feed Table Support FryerTable Support
ACCESSORIES FOR DONUT ROBOT® MARK 1, 2, and 5
16 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Cake Donut Depositor
Shortening Filter
EZ Melt 34
Mark 6 automatic fryer
HG18-EZ Easylift
Glazer
Icer
Fryer
Type ‘F’ Depositor
Feed Table Support
Feed Table
Fryer Mounting Table
Proofing Cloths
RL-18 Rack Loader
Glazing screens
Proofing Trays
H&I-2
H&I-4
Fryer Mounting
Table
Feed Table
Choosing Accessories for Donut Robot® Mark 6 system
Mark 6 System
HI-18
EP18-24
Proofer
Drain w/Valve
DONUT ROBOT® MARK 6 SYSTEM
17ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
83520114 Feed Table Proofing Trays & ClothsFT6-1004
Feed Table Support FT6-1004 FryerTable Support
MARK 6 ACCESSORIESCollecting And Cooling Donuts
86100 Rack Loader, collects donuts onto 17”x25” screens
861001 Rack Loader, collects donuts onto 17”x25” screens, for Mark 6 ‘Deep’ version
SL200-0004 (1) Glazing screen for Rack Loader, 17” x 25” (up to 36 rec-ommended)
Filtering And Recycling
MK-0557-11.5 Drain and valve for Donut Robot fryers
20515 EZMelt 34 Melter-Filter, 208/240V, 50/60/1, CE
20503 EZMelt 34 Melter-Filter, 240V/50/1, Aus/NZ
Cake Donut Production
F0032000C 230V/50/1, CE
0405 Column mount for Type F, mounts to FT6-1004 (see below)
Plungers and Cylinders: See ‘Cake Donut Depositors’ section
Yeast-Raised Donut Production
83520114 Feed Table, for Mark 6 (plugs into fryer), CE
37200 Feed Table, for Mark 6 ‘Deep’ (plugs into fryer), CE
FT6-0007SH Feed Table extension for Mark 6
FT6-0005 Proofing trays for Mark 6 (up to 48 recommended)
FT2DW-0510 Proofing cloths with rods for Mark 6 (up to 48 recommended)
FT6-1004 Support table for Mark 6 Feed Table
Icers, Glazers, Proofers
See Icer, Glazer and Proofer sections of this catalog
86100 Rack Loader with SL200-0004 Glazing Screen
MK-0557-11.5 Drain and valve
20515 EZMelt 34
F0032000C Type F w/ 0405 Column Mount
ACCESSORIES FOR DONUT ROBOT® MARK 6
18 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Insider Clean-Air Ventless Donut SystemThe Insider is Belshaw’s all-in-one donut system that eliminates exterior ventilation. The Insider cabinet contains a wealth of clean-air filters, and certified fire suppression capability.
The Insider is designed to attract the interest of passers-by, with large wrap-around viewing windows. Customers in high traffic areas can watch the Insider frying donuts automatically. The operator needs only to fill the hopper and empty the Roto-Cooler.
The new Insider addresses fire prevention, clean air, and sanita-tion requirements. Cabinet and fryers are UL-197 and NSF-4 listed for safety and sanitation. (There is no UL-710B certification for clean-air recirculation)
Standard equipment includes Cabinet, Donut Robot® Fryer, either the Mark 2 or Mark 2GP, and Roto Cooler. The Insider uses only one main plug for the whole system, and is easily moved from place to place on casters.
Call Insider Cabinet with Donut Robot® Mark 2 fryer and Roto Cooler, 208-240V
Call Insider with Donut Robot® Mark 2 GP fryer, and Roto Cooler, 208-240V
Options: EZMelt18 Filtration system, voltage to match Insider Cabinet • Voltage (see Shortening Filters section)OR Shortening Reserve Tank #MKV-1012 AND Filter Flo • Siphon #DR42-1048Roto-Cooler Item #22104, 120V/60/1, plugs into Donut Robot•
SNACKMASTER Snack Food Frying SystemFor restaurants, bars, supermarkets, convenience stores and anywhere fresh food is consumed! Snack Master submerges and fries tortilla chips, chicken nuggets, mozzarella sticks, chicken pieces, tempura and numerous other fried products automati-cally, starting from frozen or room temperature.
The whole system has a compact footprint of 72” x 32”. Snack Master is generally a one-person operation, with no standing over an open fryer.
Capacity is approx 140 lbs (64 kg) tortilla chips per hour. Other products can vary.
Standard ComponentsThe system is complete and includes Fryer, Filtering system, Support table, and a Catch Pan, as shown at right.
Call Snack Master Snack Food Frying System 208-240V
Insider with Mark 2GP r
Donut Robot® Mark 2
22103 Roto Cooler
Snack Master Frying System
INSIDER CLEAN AIR VENTLESS
19ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Thermoglaze SystemBelshaw’s Thermoglaze System provides the best method for reheating and selling pre-fried frozen donuts, cinnamon rolls, fritters and similar products. The Thermoglaze system does not require a ventilation hood, shortening, or special skills to operate. Only one operator is needed.
The Thermoglaze system consists of two components: the Thermolizer, for thawing frozen donuts, and the Ther-moglaze, for heating and glazing. The TG-25 has an integrated, built-in Thermolizer; the TG-50 has a separate Ther-molizer.
Donuts are thawed, heated and glazed all on the same glazing screen. After a 20-30 minute thaw in the Thermolizer, the first screen of donuts can be processed in less than 5 minutes. Donuts can be held in the Thermolizer for up to five hours. This allows flexibility in preparing, packaging or selling finished product.
Thermoglaze TG-25Pre-fried frozen donut system, with integrated Thermolizer, Oven, and Glazer, production rate 25 dozen/hour, ETL listed (separate Thermolizer not required)
OptionsVoltage, as below• Autowater (Thermolizer keeps water level topped up automatically when • connected to water supply)TJ-0001 screens,12.5” x 17” (up to 36 recommended depending on usage)•
22180 220/240V,50/60Hz,1ph
22333 220/240V,50Hz,1ph, CE
22334 220/240V,50/60Hz,1ph, CE, Autowater
22282 415V,50hz,3ph, CE
22283 415V,50hz,3ph, CE, Autowater
22257 415V,50hz,3ph, Aus/NZ, Autowater
Thermoglaze TG-50Pre-fried frozen donut system, with integrated oven and glazer, production rate 50 dozen/hour, ETL listed
OptionsVoltage, as below• SL200-0004 screens,17” x 25”(up to 60 recommended depending on usage)•
22449 415V,50hz,3ph, CE
22450 415V,50hz,3ph, Aus/NZ
Thermolizer TZ-17For thawing frozen donuts and keeping them up to 5 hours, before processing on TG-50, capacity approximately 34 dozen/hour. Two Thermolizers may be needed to achieve full-time 50 Doz/Hr procuction on the TG-50.
OptionsVoltage, as below•
20221 240V,50hz,1ph, CE
20257 200V,50hz,1ph
22180 TG-25
22449 TG-50
SL200-0004 Screen and 20221 Thermolizer
THERMOGLAZE FROZEN DONUT SYSTEM
20 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Type B Depositor Type B rotary crank cake donut depositor with hopper, 15lbs (6.8kg) capacity, NSF listed. Mounting system, cylinder and plungers are ordered separately.
Options: No hopper, as below•
Accessories: Plunger and Cylinder ordered separately from list on following page• Mounting System (Column or Wall mount)• Bracket Arm Height Adjuster•
B0001000 Standard Type B depositor with hopper
0226CHS Type B depositor, without hopper
0405 Column mounting system for Belshaw fryers
0406 Wall mounting system
P-0002 Bracket plate installed as standard equipment on all Belshaw floor model fryers. May be used for stability if Column mount #0405 is installed on a non-Belshaw fryer.
0400 Bracket arm height adjuster (for easier height adjustment)
0290 Hopper for Type B / Type F depositors
Type F DepositorType F electric depositor and hopper, 15lbs (6.8kg) capacity, maximum 115 deposits/minute, with touch sensitive handle. Mounting system, cylinder and plungers are ordered separately, ETL and NSF listed.
IOptions: Voltage, ‘Single-lead’ (=58 deposits/min instead of 115), Deluxe model • with polished frame
Accessories: Plunger and Cylinder ordered separately from list on following page• Mounting System (Column or Wall mount)• Bracket Arm Height Adjuster•
F0032000C 230V/50/1, CE
F00160003 220V/50/1, CE, Single Lead (= 58 deposits/minute)
0227M-DLX-220
Type F Deluxe, 220V,50/60hz,/1ph, no hopper
0290 Hopper for Type B, Type F and Type F Deluxe depositors
0405 Column mounting system
0406 Wall mounting system
P-0002 Bracket plate installed as standard equipment on all Belshaw floor model fryers. May be used for stability if Column mount #0405 is installed on a non-Belshaw fryer.
0400 Bracket arm height adjuster for easier height adjustment
B0001000 Type B
F0032000C Type F
0405 Column Mount w/optional Bracket Plate
0406 Wall Mount
Supplied collar (left) and 0400 Adjuster
0227M-DLX-220 Type F Deluxe with 0290 Hopper
CAKE DONUT DEPOSITORS • TYPE B •TYPE F
21ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Plungers And Cylinders For Type B And F DepositorsItem Number Plunger variety Photo Donut type
7SSx[size][size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2
Example: 7SSx1-1/2
Size = diameter in inches
Plain PlungerUsed for plain ring donuts (using standard cake donut mix) or for 'Old Fashion' donuts (using Old Fashion mix).
7SC-SSx[size][size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2
Example: 7SC-SSx1-1/2
Size = diameter in inches
Star PlungerThe Star plunger typically makes a ring donut with a more consistent, rounder hole than the plain plunger, with a star pattern around it.
7B-1009x[size][size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2
Example: 7B-1009x1-7/8
Size = diameter in inches
French Cruller Plunger French Cake PlungerUse with French Cruller mix to make French Crullers. You can also make a 'French Cake' donut that is made with standard cake donut mix and looks similar, but without the eggy flavor.
7F-1004x[size][size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2
Example: 7B-1004x2
Size = diameter in inches
Krinkle PlungerThis can be the most attractive of all the cake donuts. Features eight distinctive ball shaped sections all joined together like a necklace.
7G-1000-[code][code]=4 digit code for diameter, number of holes, and size of holes.
Ball plungers are made to order. Contact Belshaw when ordering
Example: 7G-1000-082D
Ball Plunger (2,3,4 or 5 Holes)Produces ball shaped donuts or 'donut holes'. With a compatible mix recipe, can also make other products such as hushpuppies, loukoumades, falafel, fish balls, and more.
7H-1000-[code] (makes 1)
7H-1001-[code] (makes 2)
[code]=3 to 5 digit code for diameter, height and lenght of slot
Example: 7H-1001-102AEStick plungers are made to order. Contact Parts Dept when ordering
Stick Plunger (1 or 2 Slots)Makes stick donuts with 1 or 2 slots. The size of the donut will depend on the size of the slot and on the dial setting of the depositor. (Setting 1 will be short, setting 2 or 3 will be longer)
7-1025x1-3/4[size]=1-3/4 only
Size = diameter in inches
Dunkerette PlungerPlain plunger with a divider that forms 3 deposits, each approximately one third of a ring donut
35SSAx[size A] 35SSBx[size B][size A]=1-1/2, 1-5/8, or 1-3/4 [size B]=1-7/8 or 2
Example: 35SSAx1-3/4 Example: 35SSBx2 Size = diameter in inches
Cylinder for Type B/FPlunger size and cylinder size must always match. For example, a 1-3/4" plunger must always be used with a 1-3/4" cylinder. However, you can use any variety of 1-3/4" plunger with a cylinder of the same size.
PLUNGERS FOR TYPE B and TYPE F
22 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Type N Depositor Type N rotary crank donut depositor with hopper, 12lbs (5.5kg) capac-ity, NSF listed. Mounting system, cylinder and plungers are ordered separately.
Type N is used for Belshaw Cut-N-Fry for Donuts/Hushpuppies/Loukou-mades.
Options: No hopper, as below•
Accessories: Plunger and Cylinder ordered separately from list on following page• Mounting System (Column or Wall mount)• Bracket Arm Height Adjuster•
N20000 Standard Type N depositor (includes hopper)
N-1001 Type N depositor without hopper
N-1033 Column mounting kit with short extender arms. Includes column and bracket for fryer mount only. Used for Belshaw’s Cut-N-Fry for Donuts, Cut-N-Fry for Loukoumathes, and Cut-N-Fry for Hushpuppies.
N-1036 Wall mounting kit with long extender arms and bracket for wall mounting.
0400 Bracket arm height adjuster (for easier height adjust-ment)
Type N PlungersType N plungers are shorter than Type B/F plungers and not inter-changeable. See previous page for photos of plungers and the donuts they produce.
Plunger size and cylinder size must always match. For example, a 1-3/4” plunger must always be used with a 1-3/4” cylinder.
N-1007SS Type N Plain plunger, 1½” - 2” (also makes ‘Old Fashion’ donuts with Old Fashion mix)"
N-1007SSS Type N Star plunger, 1½” - 2”
N-1008SS Type N French Cruller plunger, 1½” - 2”
N-1012SS Type N Krinkle plunger, 1½” - 2”
N-1009BSS Type N Ball plunger, 1½” - 2”
N-1009SS Type N Stick plunger, 1½” - 2”
N-1009BSS-103C Type N standard Loukoumathes plunger, with 3 x 3/4” diameter holes, 2” diameter
N-1009BSS-103DB Type N standard Hushpuppy plunger, with 3 x 7/8” x 1” oval shaped holes, 2”
N-1035 Type N Cylinder, obsolete for old Type N's only
N-1035L-A Type N Cylinder, standard cylinder 1½” to 1¾”
N-1035L-B Type N Cylinder, standard cylinder 1-7/8” to 2”
N20000 Type N with N-1033 Column Mount
N20000 Type N with N-1036 Wall Mount
(Left) Supplied collar 0400 Bracket Arm Adjuster
CAKE DONUT DEPOSITORS • TYPE N
23ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Plungers & Attachments for Type K Donut Depositor
K-1011A Type K (Donut) Plain plunger
K-1011S Type K (Donut)
Star Plunger
DR42-1018X1.563 Type K (Donut)
Dunkerette attachment
DR42-1017X1.563 Type K (Donut) Ball attachment
DR42-1016X1.563 Type K (Donut)
Nugget attachment
Type K Pancake Dispenser • Type K Donut Depositor
The Type K Pancake Dispenser is the restaurant industry standard for pancake production.
The Type K Donut Depositor is popular with light volume donut makers for use with smaller fryers such as Belshaw Adamatic’s 616B.
All depositors are NSF listed.
When ordering, please note:Each Type K depositor comes with a plunger (NOT ordered separately). Cylinders • are built into each depositor and cannot be removed. In most cases, a Type K (Donut) will work with a Pancake plunger, but this is not • guaranteed. A Type K (Pancake) will not work well with a Donut plunger•
Accessories: Type K stainless steel Holder (pictured right)•
8504011 Type K Pancake Dispenser
8504022 Type K Donut Depositor (with 1-9/16" plain plunger)
8504023 Type K Donut Depositor (with 1-9/16" star plunger)
8504052 Type K Donut Depositor (with single 1" plunger)
8504012 Type K Pancake Dispenser with K-1016WSS Holder
K-1016WSS Holder for Type K, stainless steel
K-1013A Plunger for Type K Pancake Dispenser
K-1011A Plunger for Type K Donut Depositor, Plain, 1-9/16"
K-1011S Plunger for Type K Donut Depositor, Star, 1-9/16"
K-1042 Plunger for Type K Donut Depositor, deposits 1 mini donut, 1"
DR42-1018X1.563
Dunkerette attachment for Donut Depositor (cuts two), 1-9/16"
DR42-1017X1.563
Ball attachment for Donut Depositor (cuts four ball shapes), 1-9/16"
DR42-1016X1.563
Nugget attachment for Donut Depositor (cuts three ball shapes), 1-9/16"
8504011 Type K Pancake with K-1016WSS Holder
8504022 Type K Donut with K-1016WSS Holder
TYPE K DEPOSITORS
24 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
‘SF’ and EZMelt Shortening Filters Belshaw’s SF and EZ Melt shortening filters effectively clean and recycle shortening in any fryer with shortening capacity up to 211 lbs (96 kg).
Features of both SF and EZMelt models: All models filter shortening through a long-life synthetic mesh filter • (lasts one normal year when used properly)All models top up fryer levels by pumping shortening back through a • flexible rinse hose. Pump is activated by foot pedal. All models have a range of fixed refill hoses for pumping directly • back to Belshaw Adamatic floor model and Donut Robot fryers. The refill hoses are a very useful convenience and are safer to operate, but not absolutely necessary. (optional, order separately from list on following page). All models are ETL listed•
SF models: These are unheated filters. In practice, this means that:Shortening should be filtered and recycled through the units while • still warm and should not be allowed to solidify.New shortening should be added directly to the fryer.• Most liquid shortenings, particularly Zero Trans Fat shortening, will • clog the pump and cause it to wear out prematurely if the shorten-ing allowed to cool and solidify. For this reason the SF models are not recommended for ZTF shortenings, and the warranty is void if so used. (EZ Melt can be used instead)
EZ Melt models: EZMelts are identical to SF Filters, with these addi-tional features:
EZMelts are melter-filters with an element that maintains temperature • at about 230°F/110°C. EZMelts include a cube cutter for quickly and safely loading and • melting cubes of solid shortening up to 50 lb (23kg). Shortening does not have to be loaded directly into fryer, which is potentially unsafe.EZMelts are warranted for all common shortenings.• If used with Donut Robot• ® fryer, a drain and valve must be in place on the fryer.
21504 SF18, 208/240V,50/60hz,1ph, CE for 618L, 718LCG
21508 SF24, 208/240V,50/60hz,1ph, CE for 624, 724CG
21512 SF34, 208/240V,50/60hz,1ph, CE for 734CG
20507 EZMELT18, 208/240V,50/60hz,1ph, CE 618L, 718LCG, Donut Robot® Mark 2, Mark 2GP, Mark 5, Mark 5GP, Insider
20501 EZMELT18, 240V/50/1, Aus/NZ 618L, 718LCG, Donut Robot® Mark 2, Mark 2GP, Mark 5, Mark 5GP, Insider
20511 EZMELT24, 208/240V,50/60hz,1ph, CE for 624, 724CG
20502 EZMELT24, 240V/50/1, Aus/NZ for 624, 724CG
20515 EZMELT34, 208/240V,50/60hz,1ph, CE for 734CG, Donut Robot® Mark 6, Mark 6 Deep
20503 EZMELT34, 240V/50/1, Aus/NZ for 734CG, Donut Robot® Mark 6, Mark 6 Deep
SM100-0002 Filter bag, long-life synthetic for SF18, SF24, EZMelt18, EZMelt24
EZ34-0027 Filter bag, long-life synthetic for SF34, EZMelt34
20507 EZMelt 18
20511 SF24
20515 EZMelt 34
FILTRATION SYSTEMS • SF • EZMELT
25ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
Fill Hoses for SF and EZMelt Filters An optional safety and convenience feature for SF and EZMelt filters. The fill hose provides a fixed connection from SF or EZMelt to fryer. When a fill hose is attached, an operator can top up shortening at any time using the foot pedal on the SF or EZMelt. Without a fill hose, the operator can use the hand held Rinse hose.
21501 Fill Hose Assembly For 618L, 718LCG, 718LFG
21503 Fill Hose Assembly 624, 724CG, 724FG
21505 Fill Hose Assembly 734CG, 734FGG
21507 Fill Hose Assembly, 30" long, Right Hand operation
Donut Robot® Mark 2, Mark 2GP, Mark 5, Mark 5G
21509 Fill Hose Assembly, 30” long, Left hand operation
Donut Robot® Mark 2, Mark 2GP, Mark 5, Mark 5G
21511 Fill Hose Assembly, 42" long, Left Hand operation
Donut Robot® Mark 2, Mark 2GP, Mark 5, Mark 5G
20504 Fill Hose Assembly, 48" long, operating from back
Donut Robot® Mark 6
20505 Fill Hose Assembly, 48" long, operating from front
Donut Robot® Mark 6
20508 Fill Hose Assembly, 60" long, Right Hand operation)
Donut Robot® Mark 6
Filter Flo SiphonHeavy duty siphon for recycling shortening in compatible Donut Robot®, 616B, or Cut-N-Fry fryers. Operates with 1-2 squeezes of the red bulb at the top. A metal bucket large enough to hold the entire contents of the fryer is required to accept shortening. The bucket should be able to withstand the temperature of the shortening when filtered. (Bucket not supplied)
DR42-1048 Filter Flo Siphon
DR42-0277DZ Cloth filter cones for Filter Flo, per dozen
Shortening Reserve TankSimple and effective! The SRT positions directly above the Donut Robot® fryer. The operator loads it with cold shortening, and the heat from the fryer warms it. The operator then inserts the shortening into the fryer whenever needed, by pushing the stop valve.
DMM-1004 Shortening Reserve Tank - fits Mark 1
MKV-1012 Shortening Reserve Tank - fits Mark 2/5
Rinse Hose (standard equipment)
21501 Fill Hose (optional)
DR42-1048 Filter Flo Siphon
MKV-1012 Shortening Reserve Tank
FILTRATION SYSTEMS • FILTER FLO • FILL HOSES
26 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
PROOFER EP18/24 • GLAZERS HG / HGEZ
EP18/24 ProoferThe EP18/24 is designed for donut production on all standard floor model donut fryers, as well as general bakery use. It accepts Proofing and Frying screens from floor model fryers up to 24”x 24”.
EP18/24 has 6 doors and 17 shelves for convenient use. An operator can insert or pull out donut screens at any time. Plexi-glass doors allow the operator to check how the contents are rising. The proofer is also suitable for baking pans and general bakery usage.
EP18/24 does not accept screens from 616B fryers and Cut-N-Fry (too small), or 734 (too large). EP18/24 does not accept baking racks.
ETL listed
Options: Voltage, Autowater as below
30124 240V/50-60/1, autowater, CE
30127 240V/50-60/1, manual fill, CE
30128 240V/50/1, manual fill, AUS-NZ
30129 240V/50/1, autowater, AUS-NZ
HG / HGEZ Glazers Glazers are available to match standard sizes of fryers/screens. All glazers listed below include casters, stainless steel cover, glaze applicator and drain. Drain trays are optional and pur-chased separately. All models are NSF listed.
HG-C models: Standard glazers with hand held glaze applicator
HG-EZ models: These eliminate heavy lifting, with rails for the glaze applicator to slide on as it applies a ‘curtain’ of glaze. The rail assembly easily tilts down to fill the applicator with glaze, again without lifting by hand.
Options: Drain Tray, Glazing Screens
22528 HG18C, for 17”x 25” screens
22531 HG18EZ, for 17” x 25” screens
22534 HG24C, for 23”x 23” screens
22535 HG24EZ, for 23”x 23” screens
HG18EZ-1002 Drain tray for HG18/HG18EZ (attaches to side)
HG18EZ-1003 Drain tray for HG18/HG18EZ (attaches to end)
HG24EZ-0534 Drain tray for HG24/HG24EZ (attaches to side)
HG24EZ-1003 Drain tray for HG24/HG24EZ (attaches to end)
SL200-0004 Glazing screens for HG-18 / HG-18EZ, each, 17" x 25"
HG24-0001 Glazing screens for HG-24 / HG-24EZ, each, 23" x 23"
30124 EP18/24 Proofer
22528 HG18C Glazer w/ HG18EZ-1002 drain tray
22531 HG18EZ Glazer w/ HG18EZ-1002 drain tray and SL200-0004 Glazing Screenr
22534 HG24EZ Glazer w/ HG24EZ-0534 drain trayr
27ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
ICING AND FINISHING TABLES
H&I-2 • H&I-4 Icing Bowl WarmersWater-warmed icing warmers for gentle heating, with two or four 13” (33cm) bowls. Heat to approximately 135°F/57°C. ETL listed.
Options: Voltage as below; 2 or 4 bowls
22242 H&I-2, 208/240V, 50/60hz, 1ph, CE
21180 H&I-4, 208/240V, 50/60hz, 1ph, CE
Donut Finishing Center Very economical on space! The Donut Finishing Center contains 3 large air heated pans and 4 smaller unheated pans for sprinkles. Two fold-down extensions. The DFC is not ETL-listed.
21755 DFC-220/240V, 50/60hz,1ph, CE
Sugaring TableBelshaw’s Sugaring Table contains two large bowls inside stainless steel drawers for dry sprinkles and finishes. The sugaring table can be docked to H&I models. No power required. ETL listed. Option: Upper shelf.
21036 ST-2-NS-STD
ST-1001 UPPER SHELF FOR 21036
High Production Icers • HI18C • HI18F • HI24FBelshaw’s HI-series Icers provide fast, uniform icing of cake and yeast-raised donuts (or any product under 2 inches in height). Full screens or bun pans can be iced in seconds. All models ETL and NSF listed.
HI18• accepts screens and pans up to 18” x 26” (24 typical donuts)HI24• accepts screens and pans up to 24” x 24” (36 typical donuts)
Options: HI18C model is Countertop• HI18F is floor standing with 4” casters• HI24F model is floor standing with 4” casters •
20018 HI-18C-240V,50/60hz,1ph, CE
20012 HI-18F-240V,50/60hz,1ph, CE
20015 HI-24F-240V,50/60hz,1ph, CE
HI18-0001 Icing pan, stainless steel for HI18 model icers
HI24-0006 Icing pan, stainless steel for HI24 model icers
HI18-1008 Heating panel assembly for HI18 model icers, 240V
HI24-1000-240CE Heating panel assembly for HI24 model icers, 240V
22242 H&I-2, 21180 H&I-4
21755 Donut Finishing Center
21036 Sugaring Tbl + ST-1001 upper shelf
20018 HI18C Icer (Countertop)
20015 HI24F (Floor standing w/casters)
28 ORDERS AND INQUIRIES: Contact your Belshaw distributor or info@belshaw.com2012 INTERNATIONAL
‘AMD’ MODEL YEAST RAISED DONUT CUTTERS
AMD Models: Yeast Raised Donut CuttersSingle cutters and roller-style cutters for yeast raised donuts in several shapes.
0183 Kaiser Roll cutter, aluminum
AMD-0080 Donut hole roll cutter, cuts five across, 1-1/4" diameter, hexagonal
AMD-0081 Ring donut cutter, single cut, 2-3/4" diameter, round
AMD-0081-2.00 Ring donut cutter, single cut, 2" diameter, round
AMD-0081-3.00 Ring donut cutter, single cut, 3" diameter, round
AMD-0081-3.25 Ring donut cutter, single cut, 3-1/4"" diameter, round
AMD-0081-3.5 Ring donut cutter, single cut, 3-1/2" diameter, round
AMD-0082 Bismarck shell cutter, single cut, 2-3/4" diameter, round
AMD-0082-2.50 Bismarck shell cutter, single cut, 2-1/2" diameter, round
AMD-0082-3.00 Bismarck shell cutter, single cut, 2-3" diameter, round
AMD-0083 Ring donut cutter, roller-style, 2-across, 2-3/4" diameter, hexagonal
AMD-0083-3.00 Ring donut cutter, roller-style, 2-across, 3" diameter, hexagonal
AMD-0084 Bismarck shell cutter, roller-style, 2-across, 2 3/4" diameter, hexagonal
AMD-0084-3.00 Bismarck shell cutter, roller-style, 2-across, 3" diameter, hexagonal
AMD-0085 Long John cutter, roller-style, 3-across, 1 1/2" x 5"
AMD-0086 Ring donut cutter, roller-style, 5-across, 2 3/4" diameter, hexagonal
AMD-0086-3.00 Ring donut cutter, roller-style, 5-across, 3" diameter, round
AMD-0087 Bismarck shell cutter, roller-style, 5-across, 2 3/4" diameter
AMD-0087-3.00 Bismarck shell cutter, roller-style, 5-across, 3" diameter, round
AMD-0088-2.375 Ring donut cutter, roller-style, 2-across, 2 3/8" diameter, round
AMD-0088-2.75 Ring donut cutter, roller-style, 2-across, 2 3/4" diameter, round
0183 Kaiser Roll Cutter AMD-0080 Hole Cutter AMD-0081 Ring Cutter AMD-0082 Bismarck Cutter
AMD-0083 Hex Cutter AMD-0085 Long John Cutter AMD-0087 Bismarck Cutter