Explore the science of Kerr at www.KerrHawe.com • freephone 00800 41 05 05 05

©2007 Kerr Corporation

NX3. Nexus Third Generation. Truly Universal.®

32.9 32.6

NX3 with OptiBond®All•In•One

Shear Bond Strength (MPa)Using SELF-ETCH Adhesive

ADHESIVE RESIN CEMENT

Case courtesy of Dr. Mitch Conditt

26.1 26.7

DENTIN ENAMEL

NX3 with OptiBond® Solo Plus™

(without dual-cure activator)

NX3 Dual-cured NX3 Self-cured

DENTIN ENAMEL

Shear Bond Strength (MPa)Using TOTAL-ETCH Adhesive

Colour Stability of Dual-Cure Resin Cements – Clear Shade

NX3 Nexus® Third Generation

Variolink® II Calibra® RelyX™ ARC

Initial

After 28 weeks in 37°C water

35

30

25

20

15

10

5

0

35

30

25

20

15

10

5

0

34.5 33.8

30.029.2

Perfection in permanent cements.• Simplified delivery. Dual-cure automix syringe eliminates hand mixing.• Light-cure applications. Cement for veneers and indications requiring

unlimited work time.• Bonds to all substrates. Excellent adhesion to dentin, enamel, CAD/CAM blocks,

ceramic, porcelain, resin and metal.• Self-etch or total-etch. Bonding protocol compatibility. No dual-cure activator required.• Superior colour stability. Long-term aesthetics for both dual-cure and light-cure cements.• Optimal handling. Easy cleanup in gel state.

SYBRON DENTAL SPECIALTIES

KerrHawe SA Via Strecce 4, P.O. Box 268, 6934 Bioggio, Switzerland Freephone: 00800 41 05 05 05 Fax: ++41 91 610 05 14 www.KerrHawe.com P29000E-CH

NX3. Defining a new generation in permanent cements.

Why NX3 Nexus Third GenerationIs the Better Choice

Does this describe yourcurrent resin cement?

• Hand mixing required Automix dual syringe – no hand mixing.Direct dispensing. Shorter procedure.Minimizes air bubbles

• Not indicated for veneers All dental substrates indicated – even veneers

• Poor handling properties Desirable non-slumping – easy cleanup and control

• Unsatisfactory radiopacity Highly radiopaque >330%

• No fluoride release Contains fluoride – secondary caries protection

• No nanofiller Nanofilled – easy dispensing, handling, cleanup and polishing

• Not indicated for core buildup Core-buildup indicated – excellentviscosity

• Low translucency Remains highly translucent after curing

• Colour differentiation between One set of try-in gels – matches light-cure cements and try-in gels anddual-cure cements

• Colour shifting Superb colour stability – dual-curematerial for ceramic restorations

Order Information33642 NX3 Intro KitContains 1 Syringe Dual-Cure (5 g) of each shade: clear, white and yellow; 1Syringe Light-Cure (1.8 g) of each shade: clear, white and yellow; 1 Syringe Try-InGel (3 g) of each shade: clear, white and yellow; 1 Bottle Silane Primer (5 ml); 30Automix Tips; Technique Guide and Directions for Use

33653 NX3 Trial KitContains 1 Syringe Dual-Cure (5 g) clear shade, 10 Automix Tips, 5ml bottle OptiBond® All•In•One “Self-Etch” Adhesive, Directions for Use

NX3 Refills33643 Automix Dual-Cure Syringe (clear), 5g33644 Automix Dual-Cure Syringe (white), 5g33645 Automix Dual-Cure Syringe (yellow), 5g33646 Automix Dual-Cure Syringe (bleach), 5g33647 Automix Dual-Cure Syringe (white opaque), 5g

33648 Light-Cure Syringe (clear), 1.8g33649 Light-Cure Syringe (white), 1.8g33650 Light-Cure Syringe (yellow), 1.8g33651 Light-Cure Syringe (bleach), 1.8g33652 Light-Cure Syringe (white opaque), 1.8g

33656 Try-In Gel (clear), 3g33657 Try-In Gel (white), 3g33658 Try-In Gel (yellow), 3g33659 Try-In Gel (white opaque), 3g33660 Try-In Gel (bleach), 3g

33655 50 Automix Tips

Universally indicated for all indirect applications, NX3 is a perma-nent resin cement system with an innovative chemistry forunmatched aesthetics, adhesion and great versatility. Delivery sys-tem choices include an automix syringe for dual-cure indicationsand a light-cure cement for multiple units where unlimited work timeis needed. The automixing dual-cure cement can be used for all indi-rect applications, including veneers. With Kerr’s proprietary amine-free initiator system and optimized resin matrix, NX3 is the first trulycolour-stable adhesive resin cement.

Simplified, Superior Bonding Compatible with self-etch and total-etch adhesives, NX3 obtains high bond strength whether the cement is light-cured or dual-cured. A dual-cure activator for the adhesive is no longer needed. Andwhile light curing is always recommended even when there is limit-ed light accessibility (i.e., PFM crowns), good adhesion is achievedin self-cure situations. NX3 adheres to all substrates – dentin, enam-el, CAD/CAM blocks, ceramic, porcelain and metal.

Versatility

Dual-Cure Cement• No colour shifting before, during or after the curing process.• The first dual-cure cement also indicated for veneers.

It offers aesthetics significantly better than most light-cure veneercements.

• One set of try-in gels match both dual-cure and light-cure cements.

Light-Cure Cement• Unlimited work time for seating veneers.• No colour shifting before, during or after the curing process.• Great handling properties.• One set of try-in gels match both dual-cure and light-cure

cements.

Study conducted by Dr. James Dunn of Loma Linda University. Trademarks are the property of their respective owners.