Post on 27-Mar-2021
HIGH PERFORMANCE 5-AXIS VERTICAL MACHINING CENTER
201305-E02-2000
NFX 380A
The high performance YCM FX 380A 5-axis vertical machining center is designed especially for small, complex high-quality parts mainly for aerospace, automotive, medical, job shop and die & mold applications. From roughing to finishing, the FX380A enables manufacturers to reduce setup time and overall lead-time while increasing machining quality and improving precision of complex machining processes.
1
NFX 380A
2
FEMFEMFinite Element Analysis
3
AC
High Rigidity Body Structure Design■ Extra wide column and base design to ensure best support and cutting rigidity.■ High quality and rugged MEEHANITE® casting maintains optimum accuracy.
High Accuracy Axial Movement■ Linear guideways adopted for fast and smooth axial movement.■ Pre-tensioned ball screws with direct drive motors achieve high torque and low
backlash.
Unit: mm (inch)
Max. Working Envelope
ø380 (ø14.96”)
ø210 (ø8.27”)
150
(5.9
1”)
220
(8.6
6”)
Accuracy
Feedrate
Table
+30º
-120
º
310 (12.20”)
480
(18.
90”)
70 (2
.8”)
C-axis Rotary 360 °
Positioning (A/C): 10/10 sec.Repeatability (A/C): 6/6 sec.
A-axis: 33.3 rev/min.C-axis: 33.3 rev/min.
Size: 380 mmThru Hole: ø80 mm
Working Envelope
4
Tool Magazine■ 30T storage capacity is standard.■ 40T/60T is servo driven. (opt.)■ ATC tool door design is standard that prevents coolant and chips from entering tool magazine.
ATC Door
Open
Close
YCM In-house A/C-axis Rotary Table■ Rotary table surface leveled at the C-axis center to ensure machining accuracy and
easy programming.■ ø380 mm (ø14.96") table size with ø80 mm (ø3.15") table-through hole design.■ 150˚(+30˚/ -120˚) A-axis tilting angle increases the ability of machining.■ Hydraulic or pneumatic cable preparation.
POWER TORQUE(rpm) POWER TORQUE(rpm)
12,0001,500 3,000 4,0008,000 1,500 15,000
12,000 15,000
5min.
5min.5min.
5min.
1min.
1min.
2min. 2min.
0.89 kgf-m
1.22 kgf-m1.5 kgf-m
0.61 kgf-m
6.44 lb-ft
8.82 lb-ft10.85 lb-ft
4.41 lb-ft0.71kgf-m0.97kgf-m1.20kgf-m1.43kgf-m
0.49kgf-m5.14 lb-ft7.02 lb-ft8.68 lb-ft10.34 lb-ft
3.54 lb-ft
3011.69
9.74
7.14
4.87
70.45
51.64
35.23
84.56
12.98 93.89
11.69
9.74
7.14
4.87
70.5
51.6
35.2
84.6
12.98 93.9
25
20
15
10
22
18.5
15
11
7.5
30
25
20
15
10
22
18.5
15
11
7.5
L H L H
12,000 rpm (std.)
12,000 rpm (std.)
15,000 rpm (opt.)
4
4.875.84
7.34
9.28
12.21
14
2
0
29
3542
53
67
88
101
14.5
0
kgf-m lb-ft kgf-m lb-ft
kgf-m lb-ft kgf-m lb-ft
2422
20
181615
12109.2
7.4
5.5
kW
18.8kW
S6-5%(22.5kW)
S6-10%(18.8kW)
S6-40%(11.3kW)
S6-60%(9kW)cont.(7.5kW)
0 1,500 3,600 10,000
POWER TORQUE(rpm)
30
27
242120
161312
10
7
1.3 kgf-m1.22 kgf-m0.75 kgf-m0.6 kgf-m0.45 kgf-m
9.4 lb-ft8.82 lb-ft5.42 lb-ft4.34 lb-ft3.25 lb-ft
HP
kWHP kWHP
32
4.87
5.84
7.34
9.28
12
14 20
11.3
8.77.3
6
4
0.73 kgf-m0.56 kgf-m0.47 kgf-m0.39 kgf-m0.26 kgf-m
kW
18.3kWS6-10%(17.5kW)
S6-25%(14.3kW)
S6-40%(11.3kW)
S6-60%(9kW)
cont.(7.5kW)4.26
4.343.88
3.072.442.03
3.48
2.752.191.83
0 1,500 3,600 10,000
35
42
53
67
86.8
101.3
0 0 0 0
POWER TORQUE(rpm)
15
12108
5
5.28 lb-ft4.05 lb-ft3.4 lb-ft2.82 lb-ft1.88 lb-ft
HP27
15,000 rpm (opt.)
L H L H
POWER TORQUE(rpm) POWER TORQUE(rpm)
12,0001,500 3,000 4,0008,000 1,500 15,000
12,000 15,000
5min.
5min.5min.
5min.
1min.
1min.
2min. 2min.
0.89 kgf-m
1.22 kgf-m1.5 kgf-m
0.61 kgf-m
6.44 lb-ft
8.82 lb-ft10.85 lb-ft
4.41 lb-ft0.71kgf-m0.97kgf-m1.20kgf-m1.43kgf-m
0.49kgf-m5.14 lb-ft7.02 lb-ft8.68 lb-ft10.34 lb-ft
3.54 lb-ft
3011.69
9.74
7.14
4.87
70.45
51.64
35.23
84.56
12.98 93.89
11.69
9.74
7.14
4.87
70.5
51.6
35.2
84.6
12.98 93.9
25
20
15
10
22
18.5
15
11
7.5
30
25
20
15
10
22
18.5
15
11
7.5
L H L H
12,000 rpm (std.)
12,000 rpm (std.)
15,000 rpm (opt.)
4
4.875.84
7.34
9.28
12.21
14
2
0
29
3542
53
67
88
101
14.5
0
kgf-m lb-ft kgf-m lb-ft
kgf-m lb-ft kgf-m lb-ft
2422
20
181615
12109.2
7.4
5.5
kW
18.8kW
S6-5%(22.5kW)
S6-10%(18.8kW)
S6-40%(11.3kW)
S6-60%(9kW)cont.(7.5kW)
0 1,500 3,600 10,000
POWER TORQUE(rpm)
30
27
242120
161312
10
7
1.3 kgf-m1.22 kgf-m0.75 kgf-m0.6 kgf-m0.45 kgf-m
9.4 lb-ft8.82 lb-ft5.42 lb-ft4.34 lb-ft3.25 lb-ft
HP
kWHP kWHP
32
4.87
5.84
7.34
9.28
12
14 20
11.3
8.77.3
6
4
0.73 kgf-m0.56 kgf-m0.47 kgf-m0.39 kgf-m0.26 kgf-m
kW
18.3kWS6-10%(17.5kW)
S6-25%(14.3kW)
S6-40%(11.3kW)
S6-60%(9kW)
cont.(7.5kW)4.26
4.343.88
3.072.442.03
3.48
2.752.191.83
0 1,500 3,600 10,000
35
42
53
67
86.8
101.3
0 0 0 0
POWER TORQUE(rpm)
15
12108
5
5.28 lb-ft4.05 lb-ft3.4 lb-ft2.82 lb-ft1.88 lb-ft
HP27
15,000 rpm (opt.)
L H L H
YCM In-house IDD Spindle
Power Chart
■ YCM self-manufactured IDD spindle.■ Powerful 22 kW, 12,000 rpm spindle for hi-power, hi-speed machining.■ Cooling system design on spindle motor seat, quill, and bearing offers most
reliable machining capability.
HEIDENHAIN
FANUC
5
Max. Speed
12,000 rpm (std.)15,000 rpm (opt.)
Spindle Oil Cooling Design
Heat Cooling System
Oil-air lubrication design applied on each bearing, suitable for spindles with the speed of 12,000 rpm and over to ensure prolonged high speed operations.
Contact SurfaceContact Surface
BT Taper BBT Taper
Backlash occurs after contactElastic deformation occurs, no backlash
Dual Surface Contact SpindleSingle Surface Contact Spindle
Contact SurfaceContact Surface
BT Taper BBT Taper
Backlash occurs after contactElastic deformation occurs, no backlash
Dual Surface Contact SpindleSingle Surface Contact Spindle
6
Oil-air Lubrication System
BBT40 Spindle Design ■ Spindle and taper dual surface contact.■ Exceptional cutting rigidity with high accuracy.■ Longer tool life.
Laser Tool Measurement (opt.)
7
Advantages of 5-axis Machining■ Enhance precision, quality and efficiency of 3D surface machining.■ Reduce tool length and increase rigidity to obtain superior machining quality.■ Cutting with the belly and edge of the tool to increase tool life.■ Reduce fixture error and lessen workpiece loading/uploading time.■ Saves manufacturing cost for fixture and electrode costs.■ Reduces machining process, machining cost while improving productivity.
Differences between 3-axis and 5-axis machining
NFX380A
100%
88%
3-axis Machine
12%■ Shorten Process■ Reduce Fixture Cost■ Improve AccuracyIncrease
3-axis machine
Change
fixture
Process
1
Change
fixture
Process
2
Change
fixture
Process
3
Change
fixture
Process
4
NFX380AChange
fixture
Process
1
Process
2
Process
3
Change
fixture
Process
4
Machining Performance
8
Automation Advantages■ Increase productivity through unmanned machining.■ Enhance quality and reliability of products.■ Reduce non-cutting or change waiting time.
OPERATIONOPERATIONSoftware Enhancement Exclusively from
Pre-machining Preparation
Programming
Machining
Instant Message Alert Maintenance
NEWNEWNEWNEW
NEWNEW
NEWNEW
Intelligent Tool Data ManagementComprehensive tool data management function allows operators to monitor and manage all positions in tool magazine
RENISHAW GUI System (Conversational Graphic Operating Interface)
15 sets of machining cycle program Reduces program input and memory timeGraphic interface & conversational command input
Tool measurement & measurement correction
High Performance Machining Mode M300With 5 sets of parameter settings, the users choose the most suitable mode for optimum machining
Pop-up Alarm DisplayInstantly provides troubleshooting procedureQuick response to alarm
Wireless Message NotificationMachine status sent to a designated cellphone number.
Intelligent Maintenance
Counter Function
Provide users with periodic maintenance options and descriptions
Instantly provide users with maintenance notifications
Allow users to keep count of workpieces with the function of overtime cycle alarm provides easy control over machining cycle time
1. Main Counter2. Periodical Counter3. Daily Counter4. Over Cycle Alarm
High Speed Machining Mode M400Increases drilling and tapping speed, reduces machining time for job shop and precision mold machining
Tool Load ManagementInstant tool load monitoring with alarm function
Multi-display FuctionDisplays 4 statuses simultaneously with configurable status display
Tool Life ManagementIndicates tool status of each group with tool life alert
Workpiece measurement
CIRCULAR HOLE PATTERN(G120 P1) Function
RECTANGULAR HOLE PATTERN (G120 P4) Function
GRID HOLE PATTERN (G120 P5) Function
Tool Length MeasurementGraphic measuring interface provides automatic tool length measurement function
Workpiece Coordinate CalculationConversational operating window provides convenient and fast setup of workpiece coordinates
YCMWORKPIECESTATUS:COMPLETE
Single Machine Status Browsing SingleMachine Status Browsing
Machine connection, MMS and e-mail settings
Production Status Process Record Production Management Statistics
Machine Status Time Record
Plant Operation Status Monitoring
System Chart
A remote monitoring system
CONTROLby
High Response AC Digital Servo & Spindle Drives with High Definition Absolute Positioning EncodersAICC II High Speed High Accuracy with Auto Switching On/Off Machining FunctionJERK Control Function (opt.)High Rigidity Tapping, Helical InterpolationCustom Marco B and Tool Path GraphicsManual Guide i with large Screen Display. (MXP-200FC, opt.)Program File Management for Easy Program ClassifyingUSB Interface for Easy Parameters & CNC Programs Transfer512KB MemoryHigh Speed Positioning Function (MXP-200FC, opt.)Memory Card Program Edit & Operation (opt.)3D Interference Check (5-axis Control as Standard)NANO Smoothing Function (opt.)400 Pairs Tool Offset, 1,000 Total Registered Programs48 Pairs of Workpiece Coordinate SystemExtended Parts Program Editing (Cut, Copy, and Paste. Max. 4,000 characters)
i_PATTERN
The YCM Production Line Monitoring System i-Direct overcomes the limitations of time and distance. This software provides plant operators with instant production status, including production value, output, standby, alarm time, status display and malfunction records of the machine.These data could be browsed online and printed. When incidents occur, i-Direct will automatically warn plant operators through e-mail or MMS message. With i-Direct Production Line Monitoring System the plant operators can easily keep track of production statuses regardless of time and distance.
9
OPERATIONOPERATIONSoftware Enhancement Exclusively from
Pre-machining Preparation
Programming
Machining
Instant Message Alert Maintenance
NEWNEWNEWNEW
NEWNEW
NEWNEW
Intelligent Tool Data ManagementComprehensive tool data management function allows operators to monitor and manage all positions in tool magazine
RENISHAW GUI System (Conversational Graphic Operating Interface)
15 sets of machining cycle program Reduces program input and memory timeGraphic interface & conversational command input
Tool measurement & measurement correction
High Performance Machining Mode M300With 5 sets of parameter settings, the users choose the most suitable mode for optimum machining
Pop-up Alarm DisplayInstantly provides troubleshooting procedureQuick response to alarm
Wireless Message NotificationMachine status sent to a designated cellphone number.
Intelligent Maintenance
Counter Function
Provide users with periodic maintenance options and descriptions
Instantly provide users with maintenance notifications
Allow users to keep count of workpieces with the function of overtime cycle alarm provides easy control over machining cycle time
1. Main Counter2. Periodical Counter3. Daily Counter4. Over Cycle Alarm
High Speed Machining Mode M400Increases drilling and tapping speed, reduces machining time for job shop and precision mold machining
Tool Load ManagementInstant tool load monitoring with alarm function
Multi-display FuctionDisplays 4 statuses simultaneously with configurable status display
Tool Life ManagementIndicates tool status of each group with tool life alert
Workpiece measurement
CIRCULAR HOLE PATTERN(G120 P1) Function
RECTANGULAR HOLE PATTERN (G120 P4) Function
GRID HOLE PATTERN (G120 P5) Function
Tool Length MeasurementGraphic measuring interface provides automatic tool length measurement function
Workpiece Coordinate CalculationConversational operating window provides convenient and fast setup of workpiece coordinates
YCMWORKPIECESTATUS:COMPLETE
Single Machine Status Browsing SingleMachine Status Browsing
Machine connection, MMS and e-mail settings
Production Status Process Record Production Management Statistics
Machine Status Time Record
Plant Operation Status Monitoring
System Chart
A remote monitoring system
CONTROLby
High Response AC Digital Servo & Spindle Drives with High Definition Absolute Positioning EncodersAICC II High Speed High Accuracy with Auto Switching On/Off Machining FunctionJERK Control Function (opt.)High Rigidity Tapping, Helical InterpolationCustom Marco B and Tool Path GraphicsManual Guide i with large Screen Display. (MXP-200FC, opt.)Program File Management for Easy Program ClassifyingUSB Interface for Easy Parameters & CNC Programs Transfer512KB MemoryHigh Speed Positioning Function (MXP-200FC, opt.)Memory Card Program Edit & Operation (opt.)3D Interference Check (5-axis Control as Standard)NANO Smoothing Function (opt.)400 Pairs Tool Offset, 1,000 Total Registered Programs48 Pairs of Workpiece Coordinate SystemExtended Parts Program Editing (Cut, Copy, and Paste. Max. 4,000 characters)
i_PATTERN
The YCM Production Line Monitoring System i-Direct overcomes the limitations of time and distance. This software provides plant operators with instant production status, including production value, output, standby, alarm time, status display and malfunction records of the machine.These data could be browsed online and printed. When incidents occur, i-Direct will automatically warn plant operators through e-mail or MMS message. With i-Direct Production Line Monitoring System the plant operators can easily keep track of production statuses regardless of time and distance.
10
11
STCP ( Smooth Tool Center Point )
FANUC 31i-MB5 Control Exclusive Function
3D Interference Simulation■ 3D Interference Simulation function can help to reduce the danger of collision in 5th axis application.
Tilted Working Plane Command■ Program order automatic exchange X-Y-Z coordinates. ■ Easy program edition, easy machining for Tilted Working Plane.
■ Simultaneous 5-axis Machining with tool end / tool side.■ Smooth motion with tool end by compensating tool direction (Angle of rotary axis)■ Smooth machining with tool side by smoothing tool posture
3-Dimensional Cutter Compensation
FANUC MXP-200 FB/FC Control Standard Function (5-axis Control)
With high-speed Smooth TCPTool center point
Tool side
12
Tilted Working Plane CommandThe PLANE function is a powerful function for defining tilted working planes in various manners.
TCPM (Tool Center Point Management)The offset of the tilting axes is compensated so that the tool tip remains on the contour.
Dynamic Collision Monitoring (DCM) Dynamic collision monitoring to protect operators and machine.
HEIDENHAIN TNC 640 HSCI Exclusive Function
Heidenhain TNC 640 HSCI
■ Simultaneous 5-axis control■ TFT color flat-panel display 15-inch■ Storage medium: SSDR solid state disk with 32 GB■ Programming in HEIDENHAIN conversational
format, with SmarT.NC or according to DIN/ISO■ Tool Center Point Management (TCPM)■ Dynamic Collision Monitoring (DCM)■ 0.5 ms Short block processing time
Kinematic Compensation1) Position of the rotary axis in the kinematics model of the control.2) Actual position of the rotary axis.3) Resulting position error during tilting.
Table & Dimensions Unit: mm inch
13
45°
75 2.95"
ø380 ø14.96"
1254.92"
T-SLOTS
80.
31"19
0.75"
12 0.47" 12
0.
47"
H8
45°
75
ø380
125
T型槽
8
19
12
12
H8
30T
40T
129.9"
124 10
4
3,300
Shi
ppin
g 2,
650
Max
. 3,1
50
R675
2,800 110"
26.6"
3,70
03,
050
145.
7"12
0.1"
2,80
025
011
0"9.
8"
3,700 145.7"
3,70
03,
050
145.
7"12
0.1"
2,800 110"
2,80
025
011
0"9.
8"
26.6"
3,700 145.7"
1.4"
124
104
Shi
ppin
g 2,
650
Max
. 3,1
50
30T
40T
3,300
船運
高度
2,6
50最
高高
度 3
,150
Ø11x20深攻PT1/4-19管牙 -2處 (對稱 )
治具孔位置詳圖 治具孔位置詳圖
Ø11x20深攻PT1/4-19管牙 -2處 (對稱 )
35.5
Ø30
35.5
Ø30
R675
2,800
3,70
03,
050
2,80
025
0
3,700
3,70
03,
050
2,800
2,80
025
0
3,700
船運
高度
2,6
50最
高高
度 3
,150
OPTIONAL ACCESSORIES
STANDARD ACCESSORIES
■ CE
■ Foundation Bolts
■ Chip Conveyor
■ Coolant Through Spindle System
(CTS)
■ Heavy Duty Coolant Pump
■ Auto Tool Measurement System
(Blum Laser Mini NT)
■ CNC Control: FANUC MXP-200FC
■ CNC Control: FANUC 31i-MB5
■ CNC Control: HEIDENHAIN TNC640
■ Tool Kit
■ Work Lamp
■ Pilot Lamp
■ Spindle Air Blast
■ Spindle Air Seal
■ Cutting Air Blast
■ Spindle Cooling System
■ Guideway Cover (X, Y, Z)
■ Oil Skimmer
■ Coolant Gun
■ Coolant System
■ Central Lubrication System
■ Hydraulic Unit (for 4th and 5th Axes)
■ Complete Chip Enclosure (With Top
Cover)
■ Leveling Bolts and Pads
■ Heat Exchanger for Electrical Cabinet
■ Mechanical, Maintenance, Electrical
and Operating Manuals
■ Safety Door
■ CNC Control: FANUC MXP-200FB
Specifications
380A SPINDLESpindle Speed/Power (std.)FANUC controller
12,000 rpm 7.5/11/15/18.5/22 kW 10/15/20/25/30 HP (cont./30min./10min./5min./1min.)
Spindle Speed/Power (opt.1)FANUC controller
15,000 rpm 7.5/11/15/18.5/22 kW 10/15/20/25/30 HP (cont./30min./10min./5min./2min.)
Spindle Speed/Power (opt.2)HEIDENHAIN controller
12,000 rpm 7.5/9/11.3/18.8/22.5 kW 10/12/15/25/30 HP (cont./S6-60%/S6-40%/S6-10%/S6-5%)
Spindle Speed/Power (opt.3)HEIDENHAIN controller
15,000 rpm 7.5/9/11.3/14.3/17.5 kW 10/12/15/19/23 HP(cont./S6-60%/S6-40%/S6-25%/S6-10%)
Spindle Taper BBT40
TRAVEL
X-axis Travel 700 mm 27.56"
Y-axis Travel 520 mm 20.47"
Z-axis Travel 480 mm 18.90"
TABLE
Table Size/T-Slots ø380 mm / 12 mm ø14.96" / 0.47" Radial
Max. Load on Table (Vertical) 200 kg 441 lb
Max. Load on Table (Horizontal) 200 kg 441 lb
Available Torque on Table 30 kg-m 217 lb-ft
A/C AXIS
A-axis 150˚ (+30˚/ -120˚)
C-axis 360˚
A/C Axis Feedrate 33.3 rev/min.
A/C Axis Positioning Accuracy 10 sec.A/C Axis Repeatability Accuracy(A-axis Optical Scales is standard) 6 sec.
FEEDRATE
X/Y/Z Rapid Feedrate 36 / 36 / 24 m/min 1,417 / 1,417 / 944 ipm
Cutting Feedrate 1~10,000 mm/min 0.04~393.7 ipm
ACCURACY ISO 10791-4 YCM*
Axial Travel Full Length
Positioning (X/Y/Z) A 0.025/0.025/0.022 mm 0.00098"/0.00098"/0.00086"
0.010/0.010/0.010 mm 0.00039"/0.00039"/0.00039"
Repeatability (X/Y/Z) R 0.015/0.015/0.012 mm 0.00059"/0.00059"/0.0005"
0.007/0.007/0.007 mm 0.00028"/0.00028"/0.00028"
*All values shown above are measured for the machine in good air-conditioned environment.
ATC
Tool Magazine Capacity(opt.) 30T (40 / 60T)
Max. Tool Weight 6 kg 13.2 lb
Max. Tool Length ø76 x 280 mm ø3" x 11.02"
GENERAL
Pneumatic Supplier 5.5 kg/cm2
Power Consumption (Transformer) FANUC: 34 kVA (40 kVA)HEIDENHAIN: 54 kVA (65 kVA)
Machine Weight 6,200 kg 13,669 lbNote: Above specifications may vary depending on the machine and the surrounding environment.The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performance of the machine without notice.The test data provided in this catalog is performed under specific test procedures and environmental conditions.
14
201305-E02-2000