Post on 06-Mar-2016
description
01
2010 01
In this numberOP NEWS (page 02-04)INTRODUCING NEW STOpflEX OP NEWS (page 05-07)• New Tubomatic 265/S El
• New Tubomatic 040 El
• New Data Transfer Kit for ES3 control boards
• New SPF6 Skiving Machine
OP PROMO (page 08)• Speedy Clean
GUARANTEED SECOND HANDPRODUCTS (page 09)• TF5 Cutting Machine
• Tubomatic H54 12V
• Hose Guide+Meter Counter
DEALER AREA (page 10)OP EXHIBITIONS (page 10)TIDBITS (page 10)OP FINANCIAL SOLUTIONS (page 11)CONTACTS (page 11)
O+p IT
ALY
11-11.5
ITALY000
ITALY000
11-11
.5
ITALY000
11.5
Hydraulic Hose & Tubing Processing Equipment
02
NE
WS
OP NewsWHAT’S NEW IN 2010: NEW STOPFLEX SYSTEM, UNRIVALLED QUALITY AND SAFETY
Proving our constant commitment to technical development and improvement, we proudly inform you that starting from May 2010, our Stopflex system shall feature improved technical modifications with the aim of optimizing perfor-mance.
Confident that you will appreciate our improve-ment, following is a summary of the all the im-proved features coming with the new Stopflex system and information material.
IntroducingNew Stopflex
1. RETENTION SYSTEM■ New more resistant material■ Enhanced performance■ Enhanced adaptability of the DINsystem to the nipple
2. PLATE■ New more resistant material■ Enhanced performance■ New Op Italy and EC incisions ■ Assurance of origin■ Enhanced quality and traceabilityassurance
O+p ITALY
O+p ITALY
THE STOPFLEX SYSTEM FULLY COMPLIES WITH THE NEW MACHI-NERY DIRECTIVE 2006/42/ECDesigned and tested in accordance with the following standards:EN 853 - EN 854 - EN 855 - EN 856 - EN 857 - SAE J517Proc
essin
g Equ
ipm
ent
Hydr
aulic
Hos
e & Tu
bing
3. CABLE■ New longer and reinforcedcable
03
NE
WS
OP News
CHARACTERISTICS OF THE NEW STOPFLEX SYSTEM (see previous page)
11-11.5 0000ITALY
ø MAX
ø MIN
IntroducingNew Stopflex
4. HOSE BAND AND GASKET■ New more resistant material■ Enhanced performance■ Green coloured gaskets■ New Op ITAlY and EC incisions■ New working Ø and batch code incisions■ Assurance of origin■ Enhanced quality and traceability assurance
■ Wider range of bands■ Band code corresponding to the range of adaption (e.g. STOPFA3233 =Ø min 32 mm - Ø max 33 mm)■ Each component easier to identify
5. ASSEMBLY■ Band distance equivalent to the length of the ferrule■ Hose fastened better even under maximum operating pressure
y
Piastrina di incisioneCutting plate
FascettaBand
Elementi di tenutaRetention system Piastrina
Cutting plate
FascettaBand
www.stopflex.it
INTERNATIONALPATENT PENDING Pr
oces
sing E
quip
men
tHy
drau
lic H
ose &
Tubi
ng
04
NE
WS
OP News
6. NEWCATALOGUE■ With extra contents■ More technical and detailed
CHARACTERISTICS OF THE NEW STOPFLEX INFORMATION MATERIAL
8. DOUBLEMEASUREMENTSYSTEM■ mm/inches■ bar/psi
9. QUANTITY■ Same number of pieces per packaging■ Better management of orders
10. MAXIMUM OPERATING PRESSURE■ Tested pressure■ Maximum safety for the system■ Maximum safety for the operator
CODICECODE
ø mmø inches
SP./TH mm
inches
L. mminches
Nr. Pezzi No. of PCS
P. Max di lav.1 Max operating P.
bar - psiPiastrina incisione
Cutting Plate
STOPFUSAE085 8,50,335
40,157
30011,811 10 415
6018
STOPFUSAE2105* 10,50,413
40,157
30011,811 10 420
6090
STOPFUSAE105 10,50,413
40,157
45017,717 10 420
6090
STOPFUSAE125 12,50,492
40,157
45017,717 10 420
6090
STOPFUSAE145 14,50,571
4 0,157
45017,717 10 420
6090
STOPFUSAE165 16,50,650
40,157
45017,717 10 420
6090
STOPFUSAE205 20,50,807
40,157
45017,717 10 350
5075
STOPFUSAE25 250,984
80,315
55021,654 10 350
5075
STOPFUSAE32 321,260
80,315
55021,654 10 210
3045
O+p ITALY
IntroducingNew Stopflex
7. INSTRUCTIONS■ Detailed instructions manual in each Stopflex packaging
Proc
essin
g Equ
ipm
ent
Hydr
aulic
Hos
e & Tu
bing
05
NE
WS
OP News
040 EL
NEWTUBOMATIC040 ELMAIN CHANGES
■ Power panel equipped with emergency stop button■ Hydraulic unit now included■ Single base for better stability
NEW TUBOMATIC 265/S EL ANDTUBOMATIC 040 ELCOMPLYING WITH THE NEW EUROPEAN STANDARDS
As most of you may know, the new Machinery Directive 2006/42/EC came into force on 29 December 2009, replacing EU Directive 98/37/EC. Among other changes, the requirements for “part-machines” (also referred to as “incomplete machines”) have been re-formulated in the new version of the Machinery Directive, for this reason we decided to turn our “part-machines”, such as Tubomatic 265S, Tubomatic 040 and hydraulic units thereof, into complete machines that fully comply with the new European standard.
NEWTUBOMATIC 265/S ELMAIN CHANGES■ Safety lever that prevents the dies from being damaged in case of incorrect positioning■ Power panel equipped with emergency stop button■ Hydraulic unit now included■ Single base for better stability
265/S EL
Contact our Sales Department for information. Proc
essin
g Equ
ipm
ent
Hydr
aulic
Hos
e & Tu
bing
NE
WS
06
OP News
NEW DATA TRANSFER KIT FOR ES3 CONTROL BOARDSFUNCTIONALITY AND ENHANCED MANAGEMENT OF OPERATIONS
The new data transfer kit is conceived for customers having two crimping machines provided with ES3 electronic control. This system allows transferring data, through a normal USB flash drive, from the me-mory of an ES3 control board to another ES3 control board, so as to avoid setting such data again on the new crimping machine.The kit is available SOLELY UPON REQUEST on all swagers already provided with ES3 electronic control (all Tubomatic V series, Tubomatic S77ES and Tubomatic N120ES).
We inform you in advance that soon you will be able to transfer and manage data even from a PC with ES3 electronic control through a USB flash drive or PC interface. Obviously we shall inform you as soon as such option is available.
Contact our SalesDepartment for information.Proc
essin
g Equ
ipm
ent
Hydr
aulic
Hos
e & Tu
bing
07
NE
WS
OP News
NEW SPF6SKIVINGMACHINEOP is proud to introduce the new SPF6 skiving ma-chine which shall soon replace the SPF4 and SPF3 models which are no longer manufactured.SPF6 was specifically conceived to meet the need to combine the main characteristics of these two models of skiving machines hence obtaining a complete and functional equipment capable of simultaneously or separately skiving the interior and exterior surface of flexible hydraulic hoses as well as obtaining perfect preassembly of the fittings thanks to the insertion function it is provided with.
MAIN TECHNICAL FEATURES OF SPF6:
■ Simultaneous skiving function (interior and exterior) for
hoses measuring up to 2”;
■ Interior and exterior skiving function (not simultaneous)
for hoses measuring up to 3”;
■ Fittings insertion function for hoses measuring up to 3”;
■ Self-centring pneumatic clamp;
■ Device for centring the return stroke of the piston
which allows accelerating the skiving and insertion
function;
■ Safety device which prevents the actuation of the
machine when the safety casing is open.
Proc
essin
g Equ
ipm
ent
Hydr
aulic
Hos
e & Tu
bing
Additional 10% discount
on the remaining SPF3
models up to 30th June.
08
NE
WS
SPEEDYCLEANSpeedy clean is an efficient and inexpensive
system for internal cleaning of hoses.
Cleaning is carried out by means of a spray gun
for introducing a specific solvent into the hose.
The detergent action of the solvent combines
with the pressure that develops inside the
component to eliminate any deposits possibly
accumulated therein. Adaptor for hoses up to
2” INCLUDED.
Make the best of this unrepeatable chance.
Contact our Sales Departmentfor information.
OP PromoSPECIAL OFFER TECHNICAL DATA SpEEDY ClEAN
CApACITY 2"
NEUMATIC INPUT 6 BAR
AIR CONSUMPTION 7 LT/MIN
EXIT pRESSURE 60 BAR
TANK CApACITY 35 lT
WASHING LIQUID SOlVENT
WEIGHT 90 KG
DIMENSIONI L x W x H 530x1040x960 mm
ClEANING STANDARD NAS 1638: 8 ISO 4406: 16/13
ADApTOR
Additional 10%
discount up to
30th June.
Proc
essin
g Equ
ipm
ent
Hydr
aulic
Hos
e & Tu
bing
09
NE
WS
Guaranteed second hand products
Tubomatic H54 12v in great conditions
TECHNICAl DATA H54 12V
SWAGING fORCE 130 TON.6 SpIRAlS 2 pIECES 1” 4 SpIRAlS 1”1/42 SpIRAlS 1”1/41 SpIRAl 1”1/2 °MAx Ø 62 mm *DIE OpENING Ø + 35 mm90° FITTINGS 1”1/4 °STANDARD VOlTAGE 12V D.C.MOTOR POWER 1.6 KWMAx ABSORPTION 240 ADIMENSIONS LxWxH 570x490x380 mmWEIGHT 102 KGDOUBlE ACTING CYlINDER
OIlDISPENSER + QUICK CHANGE OpTIONAlMARKING DIES (15 CHAR.) OpTIONAlSpECIAl DIES OpTIONAlCLEANING AND MAINTENANCE KIT OpTIONAl
° WITH SpECIAl DIES* WITH SPECIAL DIES Ø 54 MM
Contact our Sales Department for information.
TF5 cutting machine in great conditions
TECHNICAl DATA Tf5
6 SpIRAlS 2 pIECES 3"
4 SpIRAlS 3"
2 SpIRAlS 3"
INDUSTRIAl HOSE 4"
MAx Ø 160 mm
REVOLUTIONS/MINUTE 2900
PNEUMATIC INPUT MAx 7 BAR
BLADE Ø 520 mm
WEIGHT 480 KG
DIMENSIONS LxWxH 1160x768x1574 mm
STANDARD VOlTAGE 400V 50HZ 3pH
MOTOR POWER 7.5 KW
SAfETY pROTECTIONS
SUCTION CONNECTION
STROKE COUNTER
MEASURING HOSE HOLDER OpTIONAl
CENTRING DEVICE - METER COUNTER OpTIONAl
MEASURING TOLERANCE (UNI EN) ± 2%
FUME EXTRACTOR
Hose guide + meter counterin great conditionsTwo devices in one for optimizing cutting operations. Measuring tolerance (UNIEN) ± 2% Pr
oces
sing E
quip
men
tHy
drau
lic H
ose &
Tubi
ng
10
NE
WS
BECOME AN AUTHORISED OP CENTRE:
• TECHNICAl TRAINING • CERTIFICATE OF RECOGNITION
For information contact: service@op-srl.it
If you have intentions of exhibiting our machinery
at any exhibitions for our sector, please send the
name, date and place of the event via email to:
tiraboschi.valentina@op-srl.it
You will be contacted by our sales office in order to
help better organise your participation at the exhi-
bition as an official OP reseller.
WE REMIND YOU THAT OP ALWAYS PROVIDES
THE EXHIBITORS WITH:
• PROMOTIONAL MATERIAL
• ECONOMIC SUPPORT
• TECHNICAL ASSISTANCE
• MACHINES ON CONCESSIONAL TERMS
NEW CERTIFICATESNEW pARTICIpATION CERTIfICATES AND AUTHORISED SERVICE CENTRE CERTIfICA-TIONS ARE NOW AVAIlABlE
REQUESTyour
certification
Dealer Area
OP Exhibitions
FLUIDTRANS COMPOMAC(Milan 4-7 May 2010)
The fluid power transmission international event dedicated to fluid power transmissions and me-chatronics shall be held even this year. This event, crucial for the entire industry, comes at a crucial time for the whole production sector. As a matter of fact, 2010 will be marked by recovery and OP will be keen to introduce its latest array of products into the market.
See you at stand M25 N30 – HALL 05
Please request your free pass from the marke-ting department by contacting:tiraboschi.valentina@op-srl.it
TidbidsNEW AREASALES MANAGERWe are proud to introduce Sinisa Skarjan, the new Area Sales Manager. His experience gathered in the hydraulic sector and sales position testify his reliability as a point of reference for all customers who shall join his area of competence.
Mr Skarjan Sinisa Area Sales Manager
E-mail: skarjan.sinisa@op-srl.itTel: +49 6172 1771 803 - Mobile: +49 173 7649 233 SKYPE ID: skarjan.sinisaPr
oces
sing E
quip
men
tHy
drau
lic H
ose &
Tubi
ng
11
NE
WS
SALES
MANAGER:LUCA COMINIcomini.luca@op-srl.it
GRAZIA GIACOBONEgiacobone.grazia@op-srl.it
AlESSIO BEllIbelli.alessio@op-srl.it
VAlENTINA TIRABOSCHI(MARKETING)tiraboschi.valentina@op-srl.it
ElISABETTA pASOlINI(ORDER CONFIRMATIONS)pasolini.elisabetta@op-srl.it
ACCOUNTING
TECHNICAL ASSISTANCE
MANAGER:EMILIANO PORTIERIservice@op-srl.it
MANAGER:NICOlETTA lINIcontabilita@op-srl.it
Contacts
© C
opyr
ight
& A
rt D
irect
ion:
AP&
P sr
l - w
ww
.ap-
p.it
OP Financial SolutionsConcessions for OP Clients
LEASE PURCHASE
• Up to 18 months interest free.
WARRANTYEXTENSION• Possibility to extend machinery
warranty up to 3 YEARS.
OP:always pleasedto serveyou
fINANCIAlSOlUTIONS Proc
essin
g Equ
ipm
ent
Hydr
aulic
Hos
e & Tu
bing