Post on 01-Jan-2016
description
New Direct Aiming Station
PRODUCT INFORMATIONDS
Featuring
Auto Collimation feature
- More than what human Eyes can do!
- Higher Productivity in your job field!
Support “Quick” and “Accurate” in your field work
Automatically searches and display center of the Prism
What you can do with
Provides consistent collimation accuracy speed regardless of operators skill levels
Just Rough Aiming and press measuring button!!
Save time and eliminate Human Error !!
Rough Aim Measure Search Lock
Auto Collimation feature
- No need to look into an eyepiece!!- No need Horizontal or Vertical motion on tangent screw!!
In the dark Above Heat haze
With dust In the Long distance
In the wood In the fog In the Heavy traffic
DS will support you “Quick” and “Accurate” field work
DS will find and search prism center in any locations
You don’t have to adjust Vertical or Horizontal screw
Just Rough Aiming and press measuring button!!
What you can do with New DS (AC technology)
- More than what human Eyes can do!1. Easy to find and lock prism in any conditions!!2. Display angles for center of prism (Easy TOPO)
- Higher Productivity in your job field!1. Automatically turn to next “Stake Out” point (Easy Stake-out)
2. Automatic Double face measurement 3. Mesh Scan with MAGNET field software
DS series provides consistent collimation accuracy speed regardless of operators skill levels
Easy “TOPO” operation
Easy “Stake-out” operation
TS operation side doesn’t have to be skilled.
Just “Rough Aim” and “Press button”
If you use Data Collector You can realize One–man survey
It will automatically aim to next point
“Quick” & “Accurate” in your field work
“Semi-One man” in your field work
“Mesh Scan” operation
Support As-build measurment and volume calculation in your job site
Select “Scanning” menu on MAGNET field On-Board
“Simple” & “Easy” Mesh Scan in your field work
Supported by MAGNET Field
EDM
New DS Introduction
Body
Plus
DS
Prism 5,000m
Accuracy +/- (1.5mm + 2ppm)
Non-Prism 1,000m
Accuracy +/- (2mm + 2ppm) +Ultra-Powerful, Advanced EDM
Auto Collimation feature
MAGNET Field
5.6kg 5.7kg 6.9kg
230(W)x207(D) x393(H)mm
6.1kg
207(W)x174(D) x372(H)mm
191(W)x174(D) x348(H)mm
191(W)x174(D) x348(H)mm
Direct Aiming Station
DS
348372
393
2445
21
191 191 207 230
174 174 207174
You can feel compact size compare to PS
30% smaller 12% lighter than PS
Imaging
Robotic
Basic
Win CE
PS
Auto Collimation
ES
OS
Product Positioning
Build up your market with DSAuto collimation function!!
Easy “TOPO” Easy “Stake-out”
IS
Basic specification Comparison
Specifications ES OS DS PS
Prism 4,000m 5,000m
Accuracy +/- (2mm + 2ppm) +/- (1.5mm + 2ppm)
Non-Prism 500m 1,000m
Accuracy +/- (3mm + 2ppm) +/- (2mm + 2ppm)
Functions ES OS DS PSAuto setting out measurement NA NA 〇 〇
Auto Collimation NA NA 〇 〇Double face
measurement NA NA 〇 〇Mesh
Scanning NA NA 〇 〇Remote catcher NA NA NA 〇
Auto tracking NA NA NA 〇
What you can do with Direct Aiming Station (DS)
ES OS DS PSTS Shield Yes Yes Yes Yes
Fast and Powerful EDM Yes Yes Yes Yes
LongLink Communication Yes Yes Yes Yes
Advanced Angle Accuracy Yes Yes Yes Yes
Super Long Battery Life Yes Yes Yes Yes
Rugged, WaterproofDesign Yes Yes Yes Yes
Laser pointer Yes Yes Yes Yes
Guide lights Yes Yes Yes Yes
USB port Yes Yes Yes Yes
RS-232C connector Yes Yes Yes Yes
Trigger key Yes Yes Yes Yes
Functional Comparison
Let’s achieve our sales target with strategic products
DS seriesTogether!!
Thank you !!
New Direct Aiming Station
Product introduction guideDS
Featuring
1. TS Shield2. Fast and Powerful EDM3. LongLink Communication4. Advanced Angle Accuracy5. Super Long Battery Life6. Rugged, Waterproof Design7. Laser pointer8. Guide lights9. USB port10. RS-232C connector11. Trigger key12. Display
technology
“Quick Collimation” is a function that automatically searches for the center of the target
Topcon calculation technologysupport you “Quick” and “Accurate” field work - More than what human Eyes can do! - Higher Productivity in your job field!
When Auto Pointing is performed, the image sensor on the instruments detects the light beam reflected from the target, the offset between the target and telescope reticle is calculated by image processing, then the angle measurement value obtained from the encoder is compensated.
DS Major Features and Benefits
1. TS Shield
2. Fast and Powerful EDM
3. LongLink Communication
4. Advanced Angle Accuracy
5. Super Long Battery Life
6. Rugged, Waterproof Design
Long Life Battery
Fast and Powerful EDM
Advanced Angle Accuracy
DS Major features
TSshield
Rugged Waterproof design
LongLink TM
Communications1
2
4
3
5
6
Major features - TSshield
World’s first cloud-based total station management system! Tsshield provides reliable security, asset tracking, remote diagnostics and support
1
Major features - Fast and Powerful EDM
2
- Long Distance 1,000m Non-PrismAccuracy 2mm+2ppm
- Quick measurement 0.9sec (fine mode)
- Prism EDM Range :5,000m Accuracy 1.5mm+2ppm
Prism mode Fine mode Rapid mode
Prism (1.5+2ppmxD)mm (5+2ppmxD)mm
Reflector sheet*1 (2+2ppmxD)mm (5+2ppmxD)mm
Non Prism mode Fine mode Rapid mode Distance
Kodak Gray card White side*2
(2+2ppmxD)mm (6+2ppmxD)mm 0.3 – 200m
(5+10ppmxD)mm (8+10ppmxD)mm 200 - 350m
(10+10ppmxD)mm (15+10ppmxD)mm 350 – 500m
Non Prism mode Fine mode Rapid mode Distance
Kodak Gray card Gray side*3
(3+2ppmxD)mm (6+2ppmxD)mm 0.3 – 100m
(5+10ppmxD)mm (8+10ppmxD)mm 100 - 170m
(10+10ppmxD)mm (15+10ppmxD)mm 170 – 220m
*3 Figures when using Kodak Gray Card Gray side (reflection factor 18%) and brightness level is less than 30000 lx (a little cloudy).
*2 Figures when using Kodak Gray Card White side (reflection factor 90%) and brightness level is less than 30000 lx (a little cloudy).
*1 Figures when the laser beam strikes within 30° of the reflective sheet target.
*5 *6 When performing reflectorless measurement, the possible measurement range and precision will change depending on the target reflection factor, weather conditions and location conditions.
Major features - Advanced Angle Accuracy 3
Reliable performance on measuring angle
Since this technology allows the instrument to calibrate its own angle measurement system by itself, we named it the “Independent Angle Calibration System”. (IACS)
This structure requires neither external references nor operator observation, eliminating loss in accuracy due to the problems of external references and variations in operator ability.
Major features - LongLink 4
Exclusive LongLinkTM Communications 300m
When connected with external data collector the LonglinkTM communication provides the power at the remote rod position. The remote operator can record the data for codes and rod heights for as-builts eliminating most common errors. For stakeout the remote operator can view directions required to find the stake point.
Major features - Long Battery Life
Long Life Battery 5 hours> use auto collimation by every 30sec and single measurement at 20degrees
The batteries can be used with our Topcon Hiper II GPS receiver as well as Topcon total station.
6
Major features - Enviromental tough 5
Rugged Waterproof IP65 designProvides protection from the driving rain for all weather as well as dust
DS Features and Benefits
7. Laser pointer
8. Guide lights
9. USB port
10. RS-232C connector
11. Trigger key
12. Large and operability display
Graphic Color Touch TFT 240 x 320 QVGA Display
Trigger key
Guide Light USB Port
Mini USB Interface
RS-232C connector
DS Features and Benefits
8
7 10
11
9
12
Laser pointer
Features - Laser pointer
Provide the remote rod man with direction to approximately find the horizontal line up to 150m without any stress.. This feature is extremely helpful during stakeout to quickly find line without communication with the instrument man or for trying to find the horizontal angle (line) when cutting brush for a traverse line.
Features - Guide light
Easy to get on line without radio or hand signals
7
Laser pointer (Red Coaxial)
A target can be sighted with a red laser beam in dark locations without the use of the telescope
Red coaxial laser pointer is through the scope making indoor measurements very quick or in limited sunlight and short distance can assist the remote rod man.
8
Features - USB port
Features - Quick and easy Trigger Key
Quick and easy Trigger KeyIs located on the right-had side of the total station. This allows the instrument operator to easily and quickly press the Trigger key right from the horizontal tangent to get a measurement.
9
Easy access USB flash drive port
The waterproof door of the DS total station provides protection for a USB hardware thumb drive. An operator can easily import/export data from the office to the field in seconds. Instrument has USB type A and Type B for easy connection to a computer via ActiveSync.
10
Largest USB stick that can be used is 8GB
RS-232 connectorIs provided for connecting to an older data collector that does not have Bluetooth or to transfer data to a computer.
Features - RS-232C connector 11
Features - Large and operability display
Graphic Color TFT 240 x 320 QVGA Display 26 key keyboard, with 4-way directional arrow key with backlit
12
ES OS DS PSTS Shield
Yes Yes Yes Yes
Fast and Powerful EDMYes Yes Yes Yes
LongLink Communication Yes Yes Yes Yes
Advanced Angle Accuracy Yes Yes Yes Yes
Super Long Battery Life Yes Yes Yes Yes
Rugged, WaterproofDesign Yes Yes Yes Yes
Functional Comparison
Functional Comparison
ES OS DS PSLaser pointer Yes Yes Yes Yes
Guide lightsYes Yes Yes Yes
USB port Yes Yes Yes Yes
RS-232C connector Yes Yes Yes Yes
Trigger key Yes Yes Yes Yes
Motor Settings1. Select “Motor” in <Configuration>
You will see “Configuration”, “Search area” and “JOG setting” tab
Items set and options(1)AUTO AIM: Fine/Rapid(2)Search setting: None/Search(3)Turn: 5”/10”/20”/30”/60”
*Factory setting
<Configuration> tab
(1) AUTO AIMSelect "Rapid" when supporting prism pole by hand.It can be performed even with slight instability of prism position or minor shifts of target position in the field-of-view.
“Fine” is recommended when a high level of measurement accuracy is required.Make sure that the prism is securely mounted on a tripod. When using this setting when supporting the pole by hand,hand movements will result in Auto pointing taking too long to complete and “Time out” error will occur.
(2) Search setting Select “Search” for using Auto collimation function. “None” to switch off Auto Collimation.
(3) TurnTo set a tolerance range for setting accuracy when truing the instrument from the reference Angle to a Specified Angle
Auto Pointing Settings
Items set and options(1)Vertical 0 to 90(2)Horizontal 0 to 180 factory setting vertical 15 Horizontal 15
It is available to set searching area by entering angle unitsUser could set searching area vertically long or horizontally long according to it’s job style.
<Search area> tab
<JOG setting> tab
Items set and options(1) Lo : 1 to 4 (3*) (steps. 4 is fastest)(2) Hi : 1 to 7 (4*) (steps. 7 is fastest)(3) Shift : 1 to 6 (2*) (steps)
*factory setting Press [INIT] to return JOG Setting tab
DS Power Drive Endless Screw has capability of setting High and Low 2 steps shifting speeds.In Addition it is available to change switching point from low speed to High shifting speed.This setting will realize customer friendly operability.