Post on 30-May-2020
Competency Based Curriculum
National Vocational Education Qualification Programme
NVEQ Level 1
Sector: Information Technology/Information Technology
Enabled Services
PSS Central Institute of Vocational Education, Bhopal
(a constituent unit of NCERT, an autonomous organization under Ministry of Human Resource
Development, Government of India)
Copyright
All rights reserved. All copyright of this competency based curriculum is solely and exclusively owned by PSSCIVE.
Contents
1. Introduction 01
2. About the sector 03
3. Objectives of the course 04
4. Course structure 05
5. Classroom activities 06
6. Practical activities 06
7. On-the-job training 06
8. Certification 07
9. Units
IT101-NQ2012: Functional English (Basic) 08
IT102-NQ2012: Fundamentals of Computer 13
IT103-NQ2012: Mastering Typing 18
IT104-NQ2012: Word Processing (Basic) 20
IT105-NQ2012: Spreadsheet (Basic) 26
IT106-NQ2012: Digital Presentation (Basic) 31
IT107-NQ2012: E-Mail Messaging (Basic) 35
10. Assessment guide 39
11. List of equipment and materials 42
12. Teacher‟s qualifications 44
13. List of contributors 45
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 1 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Introduction
The National Vocational Education Qualification Framework (NVEQF) developed by the Ministry of Human Resource
Development (MHRD), Government of India is a descriptive framework that provides a common reference for linking various
qualifications. It is used for setting common principles and guidelines for a nationally recognized qualification system
covering Schools, Vocational Education and Training Institutions, Technical Education Institutions, and
Universities/Colleges.
The NVEQF organizes qualifications according to a series of levels of knowledge and skills. These levels are defined in
terms of learning outcomes i.e., the competencies (knowledge, skills and attitude) which the learners must possess
regardless of whether they were acquired through formal, non-formal or informal education and training system.
Qualifications are made up of occupational standards for specific areas of learning units or unit of competency. Units of
competency are the specification of knowledge and skill and the application of that knowledge and skill to the standard of
performance expected in the workplace. The Unit of competency or National Occupation Standards comprising generic and
technical competencies an employee should possess are laid down by the Sector Skill Council of the respective economic or
social sector.
Competency is defined in terms of what a person is required to do (performance), under what conditions it is done
(conditions) and how well it is to be done (standards). It can be broadly categorized into foundational, practical and
reflexive competencies. Generic competencies are considered essential for a person to participate effectively in the
workforce, whereas technical competencies are an individual's knowledge and expertise in the specific group task and its
procedures and rules and regulations. An executive order F.No.1-4/2011-VE dated 3 Sept., 2012 on the various aspects of
NVEQF has been issued by the MHRD. For more details on the NVEQF, please visit the website of MHRD at www:
mhrd.gov.in.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 2 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
The term “curriculum” (plural: curricula or curriculums) is derived from the Latin word for “race course”, referring to the
course of deeds and experiences through which children grow to become mature adults. A competency based curriculum
describes what learners must “know” and “be able to do” by the end of a program or study. It identifies the competencies
and sub-competencies each learner is expected to master. It states clearly the criteria and conditions by which
performance will be assessed. It also defines the learning activities that will lead to the learner to mastery of the targeted
learning outcome.
The competency based curriculum is broken down into coherent parts known as Units. Each unit is further broken down
into knowledge and skills on the basis of which evidence is to be provided by the learner and the evaluation is to be done
by the teacher or trainer.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 3 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
About the Sector
Information Technology (IT) and Information Technology-enabled Services (ITeS) are one of the most significant growth
stimulator of the Indian economy. IT industry has not only influenced the employment prospects of the people but also
affected the social lives of the people by connecting them through networking and social websites. The major segments of
the Industry are IT Services, Business Process Outsourcing (BPO), engineering services, research and development and
products. IT Products being manufactured in India include personal computers, servers, workstations, supercomputers,
data processing equipment, printers, digitizers, networking products, etc. Much of the IT related activities are centred on
services in Banking, Financial Services, and Insurance (BFSI), Telecommunication, Manufacturing, and Retail.
Indian IT Industry has been contributing substantially to India's Gross Domestic Products (GDP), exports and employment.
The sector is responsible for enabling employment to an additional 8.9 million people in various associated sectors, such as
security, transportation, housekeeping, catering etc., many of whom belong to rural areas/small towns in India. It has
grown tremendously over the last 15 years. The industry had about 1,50,000 employees in 1993, and around 5,00,000
employees in 1999 but today, the industry employs around 2.2 million people.
Internet has made revolutionary changes with possibilities of booking tickets online, filing Income Tax returns, applying for
passports online, online banking and transactions, etc. With an internet user-base of over 125 million, which is likely to
grow to about half-a-billion over the next few years, and also an established base of 950 million mobile users, India will be
a key player in the cyber-world. It is expected that with the launch of the ultra low-cost Aakaash tablets exclusively for
students, use of information technology will increase.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 4 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Objectives of the Course
Upon completion of this course, you will be able to:
Frame standard sentences in English for introducing yourself, greeting others, expressing about your family, telling
time, asking questions, describing weather, expressing likes and dislikes, inviting people, etc.
Describe the role and functions of various parts of computers.
Demonstrate the use of various hardware and software in basic operations, such as creating and managing files and
folder, changing display, and mouse properties, using internet and world wide web, using digital media devices, etc.
Demonstrate the knowledge of preventing harm from natural and human threats.
Demonstrate the ability to perform touch typing.
Demonstrate the use of word processor in creating, editing, formatting and printing a document.
Demonstrate the use of spreadsheet programme in creating spreadsheet, entering and editing data, entering
formulae for calculations, formatting cells, preparing stock register, inserting currency symbol, checking and
correcting spelling errors, applying borders and different styles, and printing worksheets.
Demonstrate the use of digital presentation software in creating, editing, formatting and printing slides and making
presentations.
Demonstrate the knowledge of opening and operating an email account for reading, composing, editing, sending,
forwarding and managing email messages.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 5 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Competency Based Curriculum
Sector: Information Technology/Information Technology Enabled Services
Course Structure: This course (vocational qualification package) is a planned sequence of instructions consisting of the following 07 modules, called as Units.
NVEQ Level 1
S.No. Unit Code Unit Title No. of Notional Learning Hours
Pre-requisite Unit, if any
1. IT101 - NQ2012 Functional English (Basic) 20 Nil
2. IT102 - NQ2012 Fundamentals of Computer 10 Nil
3. IT103 - NQ2012 Mastering Typing 15 Nil
4. IT104 - NQ2012 Word Processing (Basic) 20 Nil
5. IT105 - NQ2012 Spreadsheet (Basic) 25 Nil
6. IT106 - NQ2012 Digital Presentation (Basic) 15 Nil
7. IT107 - NQ2012 E-Mail Messaging (Basic) 10 Nil
Total 115
Successful completion of 115 hours of theory sessions and 85 hrs of practical activities and on-the-job learning is to be done for full qualification.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 6 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Classroom Activities: Classroom activities are an integral part of this programme and interactive lecture sessions, followed by discussions should be conducted by trained teachers. Teachers should make effective use of a variety of instructional aids, such as Videos, Colour Slides, Charts, Diagrams, Models, Exhibits, Handouts, Recorded Compact Discs, etc. to transmit knowledge in projective and interactive mode. Practical Activities: Activities that provide practical experience through case based problems, role play, games, etc.
and practical exercises using props, tools and equipment should be regularly organized off-the-job and on-the-job.
Equipment and supplies should be provided to enhance hands-on experiences to students in the chosen occupation.
Trained personnel should teach specialized techniques such as dismantling and assembling of computer parts, servicing
of computers, operating softwares, programming, etc.
On-the-Job Training: On-the-job training (OJT) occurs whenever more experienced employee or supervisor teaches
less experienced person on how to do one or more tasks of a job. The training utilizes actual equipment and materials.
OJT should be undertaken in a structured manner with a training plan under the supervision of an experienced trainer
or supervisor. A training plan that reflects tasks to be performed and competencies to be imparted should be
prepared and signed by the student, teacher, and supervisor at the workplace for training of the students in the
organization/industry. The trainer should break down all the steps of the job and train the students as per the training
plan. In a structured OJT, the following steps should be followed:
Step 1: The Instructor or the trainer tell, show, demonstrate, and explain. The trainer gives an overview of the task
while explaining the constructional details and use of the tools, equipment, materials, etc. in performing
the tasks.
Step 2: The Instructor or the trainer demonstrates each step in detail, actually doing the steps of the task and
explaining each step, one at a time, while the trainee watches. The steps may not necessarily be
demonstrated in the sequence of actual operation, as sometimes it is better that simple tasks are
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 7 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
demonstrated first to build confidence. Showing finished products at each appropriate step will help the
leaner understand what is required as outcome. While demonstrating, the trainer explains why each step is
done in the way it is done.
Step 3: It involves direct trainee participation. The trainer monitors the progress on a checklist of competencies
and offers feedback and pointers where and when needed.
Step 4: The trainee practices with clearly defined targets for performance standards.
Certification: Upon successful completion of this course, the State Education Board and the IT-ITeS Sector Skill
Council will provide a certificate to the student verifying the competencies acquired by the student. For more details
about SSC visit the website of NASSCOM at http://www.nasscom.in/itites-sector-skill-council.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 8 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Unit Code: IT101-NQ2012
Unit Title: Functional English (Basic)
Duration: 15 hours
Location: Classroom
Learning Outcome Knowledge Evaluation Performance Evaluation
Teaching and Training Method
1. Introduce self 1. Explain the importance of introducing oneself in different occasions/situations
1. Introduce self to others using appropriate sentences and body language
Interactive Lecture: Introducing oneself Activity: Role play on introducing oneself
2. Greet others 1. Describe the importance and ways of greeting people
1. Greet friends using appropriate words and body language
2. Greet strangers using standard sentences
Interactive Lecture: Greeting others Activity: Role play on greeting friends, acquaintances, strangers
3. Make sentences to express about one‟s family
1. Describe the importance of family and relations
1. Make simple sentences for telling about one‟s family
Interactive Lecture: Talking about one‟s family
Activity: Role play on talking about family
4. Make sentences to tell the time
1. Describe the importance of punctuality
1. Make sentences to tell the time
Interactive Lecture: Telling the Time Activity: Role play
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 9 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
on telling the time
5. Frame questions properly
1. State the words that are generally used for framing questions
1. Frame correct questions appropriate to the situation and need
Interactive Lecture: Framing questions Activity: Role play on asking questions
6. Describe people, things and places
1. State the adjectives that are generally used for describing people, things and places
1. Frame sentences for describing people, things and places
Interactive Lecture: Describing people, things, and places Activity: Role play on describing people, things, and places
7. Describe weather 1. State the adjectives that are generally used for describing weather
1. Frame sentences for describing weather
Interactive Lecture: Describing weather Activity: Role play on describing weather
8. Frame complete sentences
1. Identify subject and verb in a sentence
1. Frame complete sentences
Interactive Lecture: Framing complete sentences Activity: Role play on framing sentences
9. Make sentences for expressing the likes and dislikes,
1. Describe the meaning of words used for expressing likes and
1. Frame correct sentences to express feelings
Interactive Lecture: Describing likes and dislikes
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 10 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
dislikes about the likes and dislikes.
Activity: Group discussion on likes and dislikes
10.Make sentences for expressing strengths and weaknesses
1. State the words generally used for expressing strengths and weaknesses
1. Frame correct sentences to express strengths and weaknesses
Interactive Lecture: Describing strengths and weaknesses Activity: Role play on describing strengths and weaknesses
11.Make sentences to express about aspirations
1. State the words generally used for expressing aspirations
1. Frame correct sentences to express strengths and weaknesses
Interactive Lecture: Describing about aspirations and preferences Activity: Group discussion and preparation of report on aspirations and preferences
12.Tell about the importance of values
1. Describe the importance of values in one‟s life
1. Frame correct sentences for expressing about values
Interactive Lecture: Importance of values Activity: Role play and group discussion on the importance of values in life and workplace.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 11 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
13.Make sentences to use quantifiers
1. Describe the difference between countable and uncountable nouns
1. Frame sentences for making use of countable and uncountable nouns
Interactive Lecture: Quantifiers Activity: Role play on the use of countable and uncountable nouns
14.Frame sentences for inviting people
1. Describe the difference in conversations for inviting people for various occasions
1. Frame sentences for inviting people on different occasions
Interactive Lecture: Inviting people Activity: Role play on inviting people for different functions and ceremonies
15.Frame sentences for conversing with people when shopping for necessities
1. State the words that are generally used when shopping for necessities
1. Frame sentences that are generally used when shopping for necessities
Interactive Lecture: Sentences used when shopping for necessities Activity: Role play on shopping for necessities
16. Frame sentences for asking the price
1. State the words that are generally used when asking for the price of the product
1. Frame sentences that are generally used when asking for the price of products
Interactive Lecture: Sentences used when asking the price of products Activity: Role play on asking price
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 12 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
17. Frame sentences for negotiation
1. State the words that are generally used when negotiating
1. Frame sentences that are generally used for negotiations
Interactive Lecture: Sentences used in negotiations Activity: Role play on negotiation
18. Differentiate between homonyms and homophones
1. Describe the meaning of homonyms and homophones
1. Frame sentences using homonym and homophone words
Interactive Lecture: Homonyms and homophones Activity: Group discussion on homonyms and homophones
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 13 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Unit Code: IT102-NQ2012
Unit Title: Fundamentals of Computer
Duration: 15 hours
Location: Classroom and Computer Lab
Learning Outcome Knowledge Evaluation Performance Evaluation
Teaching and Training Method
1. Describe the role of computers in different fields
1. Describe the role and importance of computers in bank, communication, business, medical science, healthcare, education, media, travel and ticketing, weather prediction, sports, arts and entertainment, social media, mobile computing, research, publishing, etc.
2. Describe the meaning of hardware, software and network.
1. Identify the various components of a computer system.
2. Enlist the various types of computer and their configuration
3. Enlist the various types of software and their uses.
Interactive Lecture: Introduction to computer Activity: Group discussion on properties of hardware and software
2. Describe the use of various parts of computer
1. Describe the use of mouse and keyboard
2. Describe the functions of Central Processing Unit (CPU)
1. Identify the various parts of computer
2. Connect the cables to the
Interactive Lecture: Parts of computer Activity: Identify the various parts of
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 14 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
3. Differentiate between Random Access Memory(RAM) and Read Only Memory(ROM)
Central Processing Unit
3. Demonstrate the use of mouse
computers
3. Describe the functioning of computer system
1. Enlist various input devices
2. Enlist various output devices
3. Describe the functions of different units in a computer system
1. Identify various ports in a CPU
2. Draw a basic diagram of computer system and label
Interactive Lecture: Functions of a computer system Activity: Prepare a block diagram of a computer system and label it
4. Classify different types of computers and the role of memory
1. Describe the various terms generally used in selecting and classifying computers.
2. Describe the factors affecting the performance of computers
3. Describe the different types of programs
4. Differentiate between email and chat services
1. Identify the various types of computers
Interactive Lecture: Types of computer Activity: Identification of different types of computers and discussion on the properties and configuration of computers
5. Describe the various keys of keyboard and use of mouse
1. Describe the procedure for starting and shutting down a computer
1. Demonstrate the procedure of starting and shutting down a
Interactive Lecture: Use of computer Activity: Practice
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 15 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
2. Describe the use of various function and special keys
3. Describe the use of left and right buttons and the scroll wheel of a mouse
computer 2. Demonstrate the
use of mouse
session on using mouse for various basic operations
6. Describe the features and functions of operating system
1. Describe the functions of operating system
2. Describe the menu, icons and task bar on the desktop
3. Describe how to create and manage files and folders
1. Identify the key components of a desktop- task bar, icons, menu, etc.
2. Create, rename and delete files and folders
Interactive Lecture: Features and functions of operating system
Activity: Identify the different elements of desktop.
Practice the following:
Create, rename and delete files and folders
Change date and time
Change display properties
Add and remove window components
Change mouse Properties
7. Describe the 1. Describe the utility 1. Create a file Interactive Lecture:
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 16 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
various operations performed on files and folders
of files and folders. 2. Describe the
procedure of creating files and folders
2. Create a folder 3. Rename a file and
folder 4. Delete a file and
folder 5. Restore files and
folders from recycle bin
6. Save files in folders and sub-folders
Working with files and folders and basic operations Activity: Create, rename, edit, delete files and folders
8. Describe the uses of internet
1. Describe different types of connections and the procedure of connecting to the internet.
2. Describe the meaning of bandwidth
3. Describe the use of search engine for searching the desired information on the web
4. Enlist various search engines
1. Connect to the internet
2. Open and close a search engine
3. Search the desired information using a search engine
Interactive Lecture: Internet browsing Activity: Browse educational sites on the web and collect information related to career and employment opportunities in information technology sector
9. Search information using world wide web
1. Describe the basic components of world wide web
2. State the abbreviations used
1. Open and close web browser
2. Enter the URL on the address bar
3. Open a search
Interactive Lecture: Introduction to World Wide Web Activity: Web search
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 17 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
for expressing the universal resource locator (URL)
3. Describe the concept of e-commerce
engine and type the key word for searching
4. Demonstrate the use of internet for booking ticket
for information related to career, employment, education, etc.
10. Describe the use of digital media devices
1. Describe the use of input and output digital media devices – printers, webcams, scanners, camcorder, etc.
1. Enlist various input and output digital media devices
2. Connect various media devices to the computer
3. Demonstrate the use of media devices.
4. Add and remove hardware and software
5. Install or remove printer
Interactive Lecture: Digital media devices Activity: Search World Wide Web to study the features, cost and functioning of various digital media devices.
11. Describe various measures to protect a computer against natural and human threats
1. Describe the meaning of natural and human threat
2. Describe various measures to protect a computer from human threat
3. Describe various measures to protect
1. Demonstrate the knowledge of preventing harm to computers from natural and human threats.
Interactive Lecture: Measures to protect computers from threats Activity: Prepare a portfolio illustrating measures and case studies for protecting
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 18 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
a computer from natural threats
computers from different natural and human threats.
Unit Code: IT103-NQ2012
Unit Title: Mastering Typing
Duration: 15 hours
Location: Classroom and Computer Lab
Learning Outcome Knowledge Evaluation Performance Evaluation
Teaching and Training Method
1. Describe the purpose of various keys on a keyboard
1. Describe the use of alphanumeric, punctuation and special keys
1. Demonstrate the use of alphanumeric, punctuation and special keys
Interactive Lecture: Introduction to keyboard and touch typing Activity: Identify the various keys on the keyboard and draw a diagram of the keyboard
2. Demonstrate touch typing
1. Describe the rules to be followed while performing touch typing.
1. Demonstrate touch typing
Interactive Lecture: Touch typing
Activity: Practice sessions on touch typing
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 19 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
3. Describe the various level in rapid typing software and its use
1. Describe the various levels and bench mark in rapid typing software
1. Type a paragraph and interpret results with regard to the bench marks in typing
Interactive lecture: Touch typing
Activity: Practice sessions on touch typing
4. Describe the procedure of viewing and analyzing statistics of the progress in typing
1. Describe the procedure of viewing and analyzing statistics of the progress in typing
1. Demonstrate the knowledge of statistics section of typing tutor for assessing the progress in typing
Interactive lecture: Assessment of progress in typing Activity: Practice sessions on typing and assessment of progress
5. Demonstrate the use of lesson editor for touch typing
1. Describe the procedure for using lesson editor in adding a new lesson and learning typing
1. Demonstrate the use of lesson editor
Interactive lecture: Using lesson editor Activity: Practice sessions on typing using lesson editor
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 20 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Unit Code: IT104-NQ2012
Unit Title: Word Processing (Basic)
Duration: 15 hours
Location: Classroom and Computer Lab
Learning Outcome Knowledge Evaluation
Performance Evaluation
Teaching and Training Method
1. Describe the procedure of opening and creating a document
1. Describe the use of word processing software in creating, editing and saving documents
2. Enlist different types of word processing software
1. Open and close a word processor
2. Create and open a word document file
3. Type words in the text area
4. „Save‟ and „Save As‟ a document
Interactive lecture: Introduction to word processing Activity: Practice sessions on procedure of opening, creating, saving and closing word document
2. Describe the various operations that can be performed for editing and saving documents
1. Describe the procedure adopted for opening, editing and saving a file
1. Type a given passage
2. Edit the passage and save the file
Interactive lecture: Typing and editing documents Activity: Practice sessions on typing and editing an existing document.
3. Identify the elements of user interface
1. Describe the various elements of user interface
1. Identify various elements of user interface and describe their uses
Interactive lecture: Elements of user interface Activity: Practice
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 21 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
session on identifying elements of user interface
4. Format text 1. Describe the use of various text formatting tool bars for formatting
1. Demonstrate the knowledge of the use of text formatting tool bars for performing the following (a) Bold (b) Italic (c) Underline
Interactive lectures: Formatting text Activity: Practice session on formatting text
5. Check and replace the spelling errors using spell and grammar check feature of the word processor
1. Describe the procedures of checking spelling errors and correcting them – using mouse and menu
1. Demonstrate the procedure of checking spelling errors and correcting them using mouse and menu
Interactive lectures: Checking and correcting spelling errors Activity: Practice session on checking and correcting spelling errors
6. Demonstrate the use of thesaurus and synonym features
1. Describe the procedures of using
thesaurus and synonym features
1. Demonstrate the procedure of using thesaurus and synonym features
Interactive lectures: Using thesaurus and synonym features Activity: Practice session on using thesaurus and synonym features
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 22 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
7. Demonstrate the procedure for copying and pasting text and moving text
1. Describe the procedure for copying and pasting text and moving text
1. Demonstrate the procedure for copying and pasting text and moving text
Interactive lectures: Copying and moving text Activity: Practice session on copying, pasting and moving text
8. Demonstrate the use of “find and replace” feature for finding and replacing word in a document
1. Describe the utility of the feature - find and replace
1. Demonstrate the knowledge of “find and replace” feature for finding and replacing word in a document
Interactive lectures: Finding and replacing text in word processor Activity: Practice session on finding and replacing text
9. Apply bullet and numbering to text
1. Describe the procedure of apply bullets and numbering to text
2. Differentiate between ordered and unordered list.
1. Demonstrate the procedure of applying bullets and numbering to text
Interactive lectures: Applying bullets and numbering to text Activity: Practice session on applying different types of bullets and numbering to text
10. Demonstrate the procedure of changing font style and size
1. Describe the procedure of changing font style and size
1. Demonstrate the procedure of changing font style and size
Interactive lectures: Changing font style Activity: Practice session on changing font style and size
11. Demonstrate the 1. Describe the 1. Perform left, right Interactive lectures:
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 23 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
procedure of aligning the text
procedure of aligning a text.
and centre alignment of text
Aligning Text Activity: Prepare a single page document and align text.
12. Describe the procedure of viewing a document
1. Describe the use of print layout, full screen reading, web layout, outline and draft features of viewing the document
1. Demonstrate the use of various options of “View tab”.
Interactive lecture: Viewing documents Activity: Practice session on the use of “View tab”.
13. Describe the procedure of printing a word document
1. Describe the various features of print command
1. Demonstrate the use of different print settings
2. Print a word document
Interactive lecture: Printing a document Activity: Print a document using various features and properties of print command.
14. Describe the procedure of creating table in a document
1. Describe the procedure of creating table
1. Create/ insert a table with specified number of rows and columns
Interactive lecture: Creating table Activity: Practice session on creating table
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 24 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
15. Format a table 1. Describe the procedure of formatting a table
1. Demonstrate the use of “Design tab” and “Layout” feature in formatting a table
Interactive lecture: Formatting a table Activity: Practice session on formatting table
16. Demonstrate the procedure of
converting text to a table and table to text
1. Describe the procedure of
converting text to a table and table to text
1. Convert text into table 2. Convert table to text
Interactive lecture: Converting text to table and vice versa Activity: Practice session on converting text to table and table to text
17. Describe the procedure of setting borders to a page, paragraph and text
1. Describe the procedure of setting borders to a page, paragraph and text
1. Set border in a page 2. Set border on a
selected text
Interactive lecture: Setting borders Activity: Practice session on setting borders on the page.
18. Describe the procedure of shading a page, paragraphs and text
1. Describe the procedure of shading a page, paragraphs and text
3. Apply shades to a page, paragraph and text
Interactive lecture: Applying shades Activity: Practice session on applying shades to page, paragraph and text.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 25 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
19. Describe the procedure of previewing a document, adjusting margin and orientation
1. Describe the procedure of previewing a document, adjusting margin and orientation
1. Set page margins 2. Set page orientation
(portrait or landscape)
Interactive lecture: Applying page margins and orientation Activity: Practice session on applying page margins and orientation.
20. Align text using tabs
1. Describe types of tabs – centre, left, and right
1. Demonstrate the alignment of text using tabs
Interactive lecture: Using tabs for alignment Activity: Practice session on applying tabs for alignment
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 26 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Unit Code: IT105-NQ2012
Unit Title: Spreadsheet (Basic)
Duration: 15 hours
Location: Classroom and Computer Lab
Learning Outcome Knowledge Evaluation
Performance Evaluation
Teaching and Training Method
1. Describe the procedure of preparing spreadsheet
1. Describe the key features of a spreadsheet software
1. Identify the elements of spreadsheet application
2. Start the spreadsheet application program
3. Create spreadsheet
Interactive lecture: Introduction to Spreadsheet Activity: Practice sessions on creating a spreadsheet document
2. Describe the procedure for opening, closing and saving a spreadsheet
1. Describe the procedure for opening, closing and saving a spreadsheet
1. Open an existing spreadsheet
2. Insert data in cells 3. Save spreadsheet
with an appropriate file name
4. Close spreadsheet document
Interactive lecture: Opening, saving and closing spreadsheet Activity: Practice session on opening, saving and closing spreadsheets
3. Demonstrate the knowledge of entering data in a spreadsheet
1. Describe different data types that can be inserted in a spreadsheet
1. Enter different forms of data in a spreadsheet
Interactive lecture: Inserting data in spreadsheet Activity: Practice session on entering data
4. Describe the procedure of
1. Describe the procedure of
1. Enter the formula at the appropriate cell
Interactive lecture: Entering formula
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 27 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
entering formula for addition
entering formula for addition
for adding the figures
Activity: Practice session on entering formula
5. Describe the procedure of entering formula for subtraction
1. Describe the procedure of entering formula for subtraction
1. Enter the formula at the appropriate cell for subtraction
Interactive lecture: Entering formula for subtraction Activity: Practice session on entering formula for subtraction
6. Describe the procedure of entering formula for multiplication
1. Describe the procedure of entering formula for multiplication
1. Enter the formula at the appropriate cell for multiplication
Interactive lecture: Entering formula for multiplication Activity: Practice session on entering formula for multiplication
7. Describe the procedure of entering formula for division
1. Describe the procedure of entering formula for division
1. Enter the formula at the appropriate cell for division
Interactive lecture: Entering formula for division Activity: Practice session on entering formula for division
8. Describe the procedure of modifying rows and columns
1. Describe the procedure of adding / removing rows
2. Describe the procedure of
1. Insert and remove rows in a spreadsheet
2. Insert and remove columns in a spreadsheet
Interactive lecture: Modifying rows and columns Activity: Create a spreadsheet document and insert table. Add or remove
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 28 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
adding/ removing column
3. Merge rows and columns
rows and columns in the table.
9. Describe the procedure of adjusting and formatting cells
1. Describe the procedure of formatting a cell.
1. Adjust size of the text
2. Set color of cell border
3. Set background color of cell
4. Change cell properties
Interactive lecture: Formatting a cell Activity: Create a spreadsheet document and format cells for changing colors, font style, font size, etc.
10. Prepare a stock register
1. Describe the basic fields required for preparing a stock register
1. Prepare a stock register
Interactive lecture: Preparing a stock register Activity: Practice session on preparing a stock register
11. Customize the interface
1. Describe the procedure of adding and removing icons and buttons from ribbon
1. Demonstrate the knowledge of adding and removing icons and buttons from ribbon
Interactive lecture: Customizing the interface Activity: Practice session on customizing the interface
12. Describe the procedure for inserting a currency symbol
1. Describe the procedure for inserting a currency
1. Demonstrate the knowledge of inserting the currency symbol in
Interactive lecture: Inserting currency symbol Activity: Practice session
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 29 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
in spreadsheet symbol in spreadsheet
the cell on inserting currency symbol
13. Describe the procedure of formatting the cell content
1. Describe the procedure of formatting the cell content
1. Change the format style and size in a cell
Interactive lecture: Formatting a cell Activity: Practice session on formatting cells
14. Describe the procedure of deleting column and row
1. Describe the procedure of deleting column and row
1. Delete column and row
Interactive lecture: Deleting column and row Activity: Practice session on deleting column and row
15.Describe the procedure of checking spelling mistakes in a spreadsheet
1. Describe the procedure of checking spelling mistakes in a spreadsheet
1. Demonstrate the use of spell check button for checking the spellings in a spreadsheet
Interactive lecture: Checking spelling in spreadsheet Activity: Practice session on checking spellings
16. Describe the procedure of adding border in spreadsheet
1. Describe the procedure of adding border in spreadsheet
1. Adjust cell layout 2. Set border on a
spreadsheet 3. Use various options
for setting border
Interactive lecture: Applying border on spreadsheet Activity: Prepare a spreadsheet and apply borders
17. Describe the procedure of apply different colors and styles
1. Describe the procedure of apply different
1. Apply different colors and styles on border
Interactive lecture: Applying colors on spreadsheet
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 30 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
on spreadsheet colors and styles on spreadsheet
Activity: Prepare a spreadsheet and apply colors
18. Manage worksheet
1. Describe the procedure for adding, removing and creating a worksheet
1. Demonstrate the knowledge of adding, removing and creating a worksheet
Interactive lecture: Adding, removing and creating a worksheet Activity: Practice session on managing worksheets
19. Describe the procedure of previewing and printing a spreadsheet
1. Describe the procedure of printing a spreadsheet
1. Preview spreadsheet in print preview mode
2. Set basic printer options to print a spreadsheet
3. Print selected part of spreadsheet
4. Print whole spreadsheet
Interactive lecture: Printing a spreadsheet Activity: Prepare a spreadsheet document, select some cells and take a print of selected cells
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 31 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Unit Code: AS106-NQ2012
Unit Title: Digital Presentation (Basic)
Duration: 15 hours
Location: Classroom and Computer Lab
Learning Outcome
Knowledge Evaluation Performance Evaluation
Teaching and Training Method
1. Describe the user interface of presentation software
1. Enlist various presentation software popularly used for preparing presentation
2. Describe the use of various tabs, ribbons and icons
1. Identify elements of user interface
2. Open existing presentation
Interactive lecture: Introduction to presentation software Activity: Practice sessions on identification of elements of user interface of digital presentation software and opening and closing files.
2. Describe the procedure of creating and saving presentation
1. Describe the procedure of creating and saving presentation
1. Start digital presentation software
2. Open a new file for presentation
3. Select the template for the new presentation
4. Create new presentation
5. Save a presentation 6. Select appropriate
Interactive lecture: Creating and saving a presentation
Activity: Practice sessions on creating and saving presentations.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 32 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
design and layout of the slides
7. Change the background colour of the slides
3. Create a simple presentation using text boxes
1. Describe the procedure of creating text boxes
1. Insert or create text boxes
2. Add text to the text boxes
Interactive lecture: Creating a presentation using text boxes Activity: Practice sessions on creating text boxes, typing text in text boxes and saving presentations
4. View a presentation
1. Describe the different views of presentation
1. View the presentation in different ways
Interactive lecture: Viewing a presentation Activity: Practice session on viewing presentations
5. Describe the procedure of changing font size, style and colour of the text
1. Describe the procedure of changing font size, style and colour of the text
1. Add text in a slide of the presentation
2. Change font style, size and colour of the text
Interactive lecture: Formatting slides
Activity: Prepare a slide for a presentation. Change text style, size and colour of the slides.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 33 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
6. Describe the procedure of editing text in presentation
1. Describe the procedure of editing text
1. Align the text- left, right and centre
2. Make the text bold, italic and underline
3. Change the text box background colour
4. Create bulleted and numbered list
Interactive lecture: Formatting text on slides
Activity: Practice sessions on applying different editing options on text
8. Describe the procedure of inserting image in slides
1. Describe the procedure of inserting image in a slide
1. Create a presentation 2. Insert an image in a
slide 3. Resize the image 4. Rotate the image
Interactive lecture: Inserting image in slides
Activity: Prepare a presentation and insert images in the slides
8. Describe the procedure of applying graphics on slides
1. Describe the procedure of adding shapes and graphics
2. Describe the procedure of adding clipart
1. Insert graphics and shapes in the slides
2. Move and adjust shapes in a presentation
3. Adjust image size 4. Insert clip art in a
slide
Interactive lecture: Inserting graphics in slides
Activity: Prepare a presentation using text and graphics.
9. Describe the procedure of applying themes to the presentation
1. Describe the procedure of applying themes to the presentation
1. Create a presentation 2. Apply appropriate
theme 3. Save the presentation
Interactive lecture: Applying theme (s) to a presentation Activity: Prepare a presentation using
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 34 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
different themes
10.Describe the procedure of changing design of the presentation
1. Describe the procedure of changing design of the presentation
1. Create a presentation 2. Use a background
style option for changing the design of presentation
Interactive lecture: Applying theme (s) to a presentation Activity: Prepare a presentation and change the design of the presentation
11. Describe the procedure of arranging, deleting and adding slide
1. Describe the procedure of arranging, deleting and adding slide
1. Create a presentation 2. Use slide sorter
option to rearrange slides
3. Move the slides 4. Add slides between
two slides 5. Delete the slides
Interactive lecture: Arranging slides using slide sorter Activity: Prepare a presentation and arrange, add, delete and move slides
12. Print a presentation
1. Describe the procedure of saving and printing a presentation
1. Create a presentation 2. Print a slide 3. Print handouts with
2,4, and 6 slides per page
Interactive lecture: Printing a presentation
Activity: Practice sessions on printing presentations
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 35 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Unit Code: IT107-NQ2012
Unit Title: E-Mail Messaging (Basic)
Duration: 10 hours
Location: Classroom and Computer Lab
Learning Outcome Knowledge Evaluation
Performance Evaluation
Teaching and Training Method
1. Describe the use and applications of e-mail service
1. Describe the purpose of e-mail service
2. Describe the elements of email
3. Describe the email message format
1. Identify the various elements of the email message
Interactive lecture: What is E-mail?
Activity: Group discussion on the importance and elements of email services
2. Describe the procedure of creating an E-mail account
1. Describe the procedure of creating an e-mail account with Gmail
1. Open an e-mail account with Gmail
2. Login/ Sign in an email account
2. Logout an email account
Interactive lecture: Opening an E-mail account with Gmail
Activity: Practice sessions on the procedure of creating email account with Gmail
3. Describe the procedure of creating an E-mail account
1. Describe the procedure of creating an e-mail account with outlook
1. Open an e-mail account with Outlook
2. Login/ Sign in an email account
3. Logout an email account
Interactive lecture: Creating E-mail account with Outlook
Activity: Practice sessions on the procedure of creating email account
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 36 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
4. Describe the procedure of linking email address to email application
1 Describe the procedure of linking email address to email application
1. Demonstrate the knowledge of linking email address with Outlook
Interactive lecture: Linking email address with outlook Activity: Practice sessions on linking email address with Outlook
5. Describe the procedure of composing email messages
1. Describe the procedure of creating/composing email messages
1. Sign in email account
2. Add signature 3. Compose message
and subject line 4. Prepare a draft
message and save in Drafts folder.
5. Open the message in the Drafts folder
6. Edit the message 7. Send the message 8. Open the Outbox 9. Open the Sent
box
Interactive lecture: Email messaging Activity: Practice session on composing, saving and sending messages
6. Receive and respond to the email messages
1. Describe the procedure of opening and responding to the email messages
1. Sign in email account
2. Read the message in the inbox
3. Prepare an appropriate reply
Interactive lecture: Receiving and responding to email messages Activity: Practice
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 37 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
to the message 4. Forward the
message to a recipient
sessions on receiving, responding and forwarding messages
7. Describe the use of email ribbon
1. Describe the use of home and view tab options for formatting text
1. Demonstrate the use of home and view tabs
Interactive lecture: Email ribbon Activity: Practice sessions on use of email ribbon
8. Describe the procedure of formatting email message and checking for spelling errors
1. Describe the procedure of aligning the text in the message and checking and correcting the spellings
1. Demonstrate the knowledge of aligning the text
2. Bold, underline and italicize the text
3. Check and correct the spelling errors
Interactive lecture: Aligning text in the message Activity: Practice sessions on alignment of text and spell check
9. Describe the procedure of attaching files and images with e-mail message
1. Describe the procedure of attaching file to the email message
1. Compose a new email message
2. Attach text and image file with the message
3. Prepare a short subject line for the message
4. Send message
Interactive lecture: Attaching files with e-mail Activity: Prepare an e-mail message and attach a text file with email.
10. Use help feature for
1. Describe the procedure of using
1. Write appropriate key word and use
Interactive lecture: Using help feature
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 38 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
finding solutions to the problems
help for finding solutions to the problems
the index for finding solutions to the problems
Activity: Practice sessions on using help feature
11. Print email message
1. Describe the procedure of printing a message
1. Sign in email account
2. Read the message in the inbox
3. Print the message using various options
Interactive lecture: Printing a message Activity: Practice sessions on printing email messages
12. Organize emails and manage contacts
1. Describe the procedure of organizing and managing emails
1. Create a contact 2. Edit a contact 3. Add contacts to contact group 4. Delete a contact
Interactive lecture: Organizing and managing contacts Activity: Practice sessions on organizing and managing contacts
13. Organize email messages using folders
1. Describe the procedure of creating, moving and deleting folders
1. Demonstrate the knowledge of creating, renaming, moving and deleting folders
2. Demonstrate the procedure of transferring emails to the
Interactive lecture: Creating and managing folders Activity: Practice sessions on creating and managing folders
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 39 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
folders
Assessment Guide
Assessment is a procedure used for determining an individual's progress or level of mastery/competence in an occupational
area. It may be formative (continuous) and/or summative (final). It is a procedure of collecting evidence and making
judgement about the extent to which a person demonstrates the knowledge and skills set out in the standards or learning
outcomes of a unit of competency. Assessment should be done on the basis of information or evidence about the
individual‟s ability against clearly stated objectives or standards. A diversity of assessment methods is required to achieve
the multiple purposes and to satisfy the requirements of competency based assessment. Appropriate evidence is to be
collected from activities that can be clearly related to the Units of Competency. It should cover all the elements and
performance criteria/indicators in the competency standards. Student‟s achievements should be assessed by using the following methods of assessment.
S.No. Method of Assessments Weightage (Max. marks)
Evaluator
1. Written test 30 Teacher
2. Practical test 30 Certified Assessor #
3. Oral test/viva voce 10 Teacher/External Examiner
4. Portfolio 10 Teacher
5. Project 10 Teacher/Trainer
6. Direct Observation 10 Teacher/Trainer
Total 100
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 40 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
# Assessors will be certified by the State Education Board.
1. Written test: It allows candidates to demonstrate that they have the knowledge and understanding of a given topic.
2. Practical test: It allows candidates to demonstrate application of skills in simulated or real work conditions against
competency standards (skill and academic standards).
3. Oral test/viva voce: It allows candidates to demonstrate communication skills and content knowledge. Audio or video
recording can be done at the time of oral test or viva voce.
4. Portfolio: It is a compilation of documents that supports the candidate‟s claim of competence that was acquired from prior learning and experience. Documents (including photo‟s, newspaper articles, reports, etc.) of practical experience
in the workplace or the community and photographs of the products prepared by the candidates related to the units of
competency should be included in the portfolio.
5. Project: Projects (individual or group projects) are a great way to assess the practice skills on a deadline, but these
should be given on the basis of the capability of the individual to perform the tasks or activities involved in the project.
Projects should be discussed in the class and the teacher should periodically monitor the progress of the project and
provide feedback for improvement and innovation.
6. Direct Observation – Direct observation requires a considerable degree of commitment from the observer and those
being observed. Employability skills evaluation listed below in the table should be evaluated through direct observation
by the teacher/trainer and appropriate records should be maintained for transparency in evaluation.
Employability Skill Area
S.No. Competencies and Performance Standards Competent Not Yet Competent
Communication 1. Questions appropriately
2. Writes clearly and legibly
3. Demonstrates good listening and responding skills
4. Informs about the absence and reasons of absence
Responsibility 5. Organizes work
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 41 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
6. Manages time effectively and efficiently
7. Complete assignments timely
8. Displays care for tools and equipment
9. Accepts responsibility pleasantly
10. Exhibits patience
11. Demonstrates pride in work
Interpersonal relationship
12. Displays friendly and cooperative attitude
13. Demonstrates tactfulness in difficult situations
14. Accepts constructive criticism
15. Exhibits positive attitude
Health and Safety 16. Practices good personal hygiene regularly
17. Maintains good personal health
18. Dresses well and in appropriate manner
Innovation and Creativity
19. Give reasons and make judgements objectively
20. Share ideas and thoughts with others
1. Competent = 0.5 marks
2. Not yet competent = 0
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 42 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
List of Equipment and Materials The list of equipment and materials given below is suggestive and an exhaustive list should be prepared by the
teacher/trainer. Only basic tools, equipment and accessories should be procured by the Institution for performance of
routine tasks or activities by the students.
I. Computer Hardware, Software and Peripherals HARDWARE
Pentium system with multimedia and Combo drives, Zip drives and DAT drives (Latest configuration)
Notebooks
Inkjet printer
Laser printer
Spare memory, Processor, cables, connectors, power pack, battery.
NIC cards.
WEB Camera
One Dot Matrix printer for dismantling, demonstration and reassembly.
Inkjet/Desk jet for dismantling, demonstration and reassembly.
LaserJet for dismantling, demonstration and reassembly.
Line printer.
External Hard disk drives.
Different types, makes and capacities of HDD in IDE/ATA and SCSI.
Flash/Thumb/Pen drives of different makes and capacities.
Different types, makes and sizes of monitors for dismantling, demonstration and reassembly
Different types of Keyboards including wireless keyboards.
Different types of Mice including wireless mouse.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 43 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
SOFTWARE
Operating systems- full and legal versions.
Windows MS office/OpenOffice package.
Linux OS.
TOOLS
Tool kit
Cable connectors
Crimping tools
RJ45 connectors and Crimping tool.
Vacuum cleaner
Air blower
OTHER DEVICES
UPS 5 KVA
Multimedia Projector
External HDD
DVD writer
UTP 5/5e/6 cable.
FURNITURE
Computer maintenance table
Lab stools/chairs
Computer tables
CONSUMABLES
Paper
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 44 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
Printer Cartridges II. Training Materials
(i) Teacher‟s handbook
(ii) Reference books
(iii) Student workbook
(iv) Brochures
(v) Slides for presentations
(vi) Recorded Compact Discs
(vii) Video tapes
Teacher’s Qualifications Qualification, competencies and other requirements for appointment of Graduate Teacher (InformationTechnology) on contractual basis should be as follows:
S.No. Qualification Minimum Competencies Age Limit
1. BCA/B.Sc. (Computer Science)/ B.Sc. (IT) from any U.G.C. recognized University or 3 years Diploma in Computer Science & Engineering or IT/ITeS or DOEACC A level Desirable 1 year experience in Industry
Effective communication skills (oral and written)
Basic computing skills.
18-37 years Age relaxation to be provided as per Govt. rules.
NVEQ Level 1 – Information Technology/ Information Technology Enabled Services 2012
Page 45 of 48 PSS Central Institute of Vocational Education – CDEC - 2012
List of Contributors 1. Prof. R.B. Shivagunde, Joint Director, PSSCIVE, Bhopal
2. Dr. Vinay Swarup Mehrotra, Head, Curriculum Development and Evaluation Centre, PSSCIVE, Bhopal
3. Mr. Rituraj Tamrakar, Junior Project Fellow, PSSCIVE, Bhopal.
Subject Matter Experts
1. Dr. Om Vikas
2. Ms Gurpreet Kaur
3. Mr. Mukesh Kumar
4. Ms Nancy Sehgal
5. Mr. Yogesh Kuma.
6. Ms. Darshika Sanghani
7. Ms. Sonia Kakkar
8. Mr. Toral Veecumsee
9. Ms. Rekha Menon
10. Mr. Ajay Goel
11. Mr. Austin Thomas.
For more information, please contact:
Dr. Vinay Swarup Mehrotra
Head, Curriculum Development and Evaluation Centre (CDEC)
PSS Central Institute of Vocational Education (PSSCIVE),
Shyamla Hills,
Bhopal – 462 013
E-mail: drvs.mehrotra@gmail.com