Post on 13-Mar-2022
MWS3A Datasheet
Detection pattern high sensitivity low
Dimensions (mm)
MWS3A datasheet issue 1.1 – Page 1 of 2
MWS3A | Adjustable head, fl ush mounted, ceiling, microwave presence/absence detectors
Unlike fi xed head microwave detectors the MWS3A off ers a unique presence/absence detection capability by using an adjustable head.
Key Product Features:
● Unique adjustable head design to achieve the required detection pattern
● Locking mechanism to prevent tampering
● Can be fl ush or surface mounted
● IP40 rated.
85 92
0 – 90°
Head can be adjusted to suit the detection pattern required
6m23m
2.6m
Sensitivity set to maximumDetector head position set to 80°
2.6m
6m
19m
Sensitivity set to 80%Detector head position set to 40°
Available options
● LV – Low voltage
● VFC – Voltage free contact
● 2CH – 2 channel
● 2CH-NC – 2 channel normally closed for fail safe applications
Detection head position set to 0°
Detection head position set to 80°Detection head position set to 40°
Available control methods
● PRM – Switching
● DD – DALI/DSI dimming
● AD – Analogue dimming
● KNX
2.6m
17mSensitivity set to maximumDetector head position set to 0°
6m
17894
MWS3A datasheet issue 1.1 – Page 2 of 2
CP Electronics A Business unit of Legrand Electric Limited, Brent Crescent, London NW10 7XR, UKt. +44 (0)333 900 0671info@cpelectronics.co.uk
Important notice:
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and the applicable Building Regulations.
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
www.cpelectronics.co.uk connect with us
Installation
Purpose
Cutout diameter
Time out range
Compliance
Insulation class
Material (casing)
Humidity
Working temperature range (OC)
Fans & ventilation equipment (F&V)
Resistive heaters (RH)
LED lighting (LED)
Compact fluorescent lighting (CF)
Fluorescent lighting (F)
Incandescent lighting (INC)
Maximum loads
Terminal capacity
Power consumption parasitic (mW)
Supply frequency (Hz)
Supply voltage (AC)
Weight (kg)
Device/ballast control
IP rating
Control method
Part Code
Technical Data
Independent flush mounted, electronic control
Sensing control
74mm
10s–99m
EMC-2014/30/EU, LVD-2014/35/EU
Class 2
Flame retardant ABS and PC/ABS
5 to 95% non-condensing
-10 to 50
10A
10A
10A
10A
10A
10A
2.5mm²
910mW
–
230 VAC +/- 10%
0.15
–
40
PRM Switching
MWS3A-PRM
Independent flush mounted, electronic control
Sensing control
74mm
10s–99m
EMC-2014/30/EU, LVD-2014/35/EU
Class 2
Flame retardant ABS and PC/ABS
5 to 95% non-condensing
-10 to 50
10A
10A
10A
10A
10A
10A
2.5mm²
961mW
–
230 VAC +/- 10%
0.15
up to 20 drivers/ballasts
40
DALI/DSI Digital Dimming
MWS3A-DD
Independent flush mounted, electronic control
Sensing control
74mm
10s–99m
EMC-2014/30/EU, LVD-2014/35/EU
Class 2
Flame retardant ABS and PC/ABS
5 to 95% non-condensing
-10 to 50
10A
10A
10A
10A
10A
10A
2.5mm²
959mW
50
230 VAC +/- 10%
0.15
up to 10 drivers/ballasts
40
1–10V Analogue Dimming
MWS3A-AD