Module Catalogue for the Master’s Degree Course …...Module Catalogue for the Master’s Degree...

Post on 06-Apr-2020

3 views 0 download

Transcript of Module Catalogue for the Master’s Degree Course …...Module Catalogue for the Master’s Degree...

Module Catalogue for the Master’s Degree Course

‘Master of Science in Computer Aided Conception and Production in Mechanical Engineering’ (M.Sc.)

Appendix 1 – Module Catalogue

This module catalogue provides the current status on the day the decision on the examination

regulations was made; any changes that do not concern the examination forms will be announced online

under: Link http://master-mechanical-engineering.com/.

The complete and current module contents can be seen in the module handbook of the programme.

The module handbooks can requested online under http://www.campus.rwth-

aachen.de/rwth/mhb/mhblist.aspx?tguid=0xBA76F399D1893541BFCF7CBC6BAFE455 or through the

QR-Code above.

2

Table of Contents Compulsory Modules – First Term (Winter Semester) ........................................ 4

Course Track: Conception and Production .......................................................... 4

RWTH Aachen (Faculty 4 – Mechanical Engineering) .......................................... 4

Module: Numerical Methods in Mechanical Engineering ..................................... 4

Module: Advanced Finite Element Methods ...................................................... 5

Module: Advanced Software Engineering ........................................................ 6

Compulsory Module– First Term (Winter Semester) ........................................... 7

Course Track: Conception and Production .......................................................... 7

Module: German Language Course ................................................................. 7

Compulsory Elective Modules – First Term (Winter Semester) ........................... 8

Course Track: Conception and Production .......................................................... 8

RWTH Aachen (Faculty 4 – Mechanical Engineering) .......................................... 8

Module: Mechatronics and Control Techniques for Production Plants ................... 8

Module: Micro- and Macrosimulation of Casting Processes ................................. 9

Module: Practical Introduction to FEM-Software I ............................................10

Compulsory Elective Modules – First Term (Winter Semester) ......................... 11

Course Track: Conception ................................................................................. 11

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 11

Module: Fandamentals of Lightweight-Design .................................................11

Module: Tensor Algebra and Tensor Analysis for Engineering Students I ............12

Compulsory Elective Modules – First Term (Winter Semester) ......................... 13

Course Track: Production ................................................................................. 13

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 13

Module: Control Engineering ........................................................................13

Module: Machine Tools ................................................................................14

Module: Manufacturing Technology I .............................................................15

Module: Industrial Engineering and Ergonomics ..............................................16

Compulsory Modules – Second Term (Summer Semester) ................................ 17

Course Track: Conception and Production ........................................................ 17

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 17

Module: Continuum Mechanics .....................................................................17

Module: Multibody Dynamcis ........................................................................18

Module: Computational Fluid Dynamics I .......................................................19

Compulsory Modules – Second Term (Summer Semester) ................................ 20

Course Track: Conception ................................................................................. 20

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 20

Module: Nonlinear Structural Mechanics ........................................................20

Module: Failure of Structures and Structural Elements.....................................21

Compulsory Elective Modules – Second Term (Summer Semester)................... 22

Course Track: Conception and Production ........................................................ 22

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 22

Module: Welding and Joining Technologies .....................................................22

Module: Finite Element Methods in Lightweight Design ....................................23

Module: Practical Introduction to FEM-Software II ...........................................24

Module: Modeling, Model Reduction and Simulation in Laser Processing - Laser ..25

Module: Modeling, Model Reduction and Simulation in Laser Processing - Design 26

Module: Reliable Simulation in the Mechanics of Materials and Structures ..........27

Module: Mechanics of Engineering Materials ...................................................28

3

Compulsory Elective Module– Second Term (Summer Semester) ..................... 29

Course Track: Conception ................................................................................. 29

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 29

Module: Tensor Algebra and Tensor Analysis for Engineering Students II ...........29

Compulsory Elective Modules – Second Term (Summer Semester)................... 30

Course Track: Production ................................................................................. 30

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 30

Module: Manufacturing Technology II ............................................................30

Module: Production Metrology ......................................................................31

Module: Computational Modeling of Membranes and Shells ..............................32

Compulsory Modules – Third Term (Winter Semester) ..................................... 33

Course Track: Conception and Production ........................................................ 33

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 33

Module: Computational Fluid Dynamics II ......................................................33

Module: Simulation of Discrete Event Systems ...............................................34

Compulsory Modules – Third Term (Winter Semester) ..................................... 35

Course Track: Conception ................................................................................. 35

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 35

Module: Machine Design Process and Practical Applications of Computer-Aided

Engineering Tools .......................................................................................35

Compulsory Modules – Third Term (Winter Semester) ..................................... 36

Course Track: Production ................................................................................. 36

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 36

Module: Quality Management .......................................................................36

Module: Simulation Techniques (Modeling and Simulation) in Manufacturing

Technology ................................................................................................37

Module: Production Management A ...............................................................38

Compulsory Elective Modules – Third Term (Winter Semester) ........................ 39

Course Track: Conception and Production ........................................................ 39

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 39

Module: Modelling, Model Reduction and Simulation in Laser Processing II .........39

Module: Selected Topics of Inelasticity Theory ................................................40

Module: Molecular Mechanics and Multi-scale Modelling ...................................41

Module: Mechanics of Forming Processes .......................................................42

Compulsory Module– Third Term (Winter Semester) ........................................ 43

Course Track: Conception and Production ........................................................ 43

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 43

Module: Mini Thesis ....................................................................................43

Compulsory Module– Fourth Term (Summer Semester) ................................... 44

Course Track: Conception and Production ........................................................ 44

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 44

Module: Industrial Internship .......................................................................44

Compulsory Module– Fourth Term (Summer Semester) ................................... 45

Course Track: Conception and Production ........................................................ 45

RWTH Aachen (Faculty 4 – Mechanical Engineering) ........................................ 45

Module: Master Thesis .................................................................................45

4

Compulsory Modules – First Term (Winter Semester)

Course Track: Conception and Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Numerical Methods in Mechanical Engineering

MODULE: NUMERICAL METHODS IN MECHANICAL ENGINEERING

Term 1 Credit Points 7 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Numerical Methods in Mechanical Engineering Compulsory Module 1 7 0

Lecture:

Numerical Methods in Mechanical Engineering Compulsory Module 1 0 3

Exercise / Practical Work:

Numerical Methods in Mechanical Engineering Compulsory Module 1 0 2

Requirements Grading

-none-

Numerical Methods in Mechanical Engineering

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

5

Module: Advanced Finite Element Methods

MODULE: ADVANCED FINITE ELEMENT METHODS

Term 1 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Advanced Finite Element Methods Compulsory Module 1 5 0

Lecture:

Advanced Finite Element Methods Compulsory Module 1 0 2

Exercise:

Advanced Finite Element Methods Compulsory Module 1 0 2

Requirements Grading

-none-

Advanced Finite Element Methods

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

6

Module: Advanced Software Engineering

MODULE: ADVANCED SOFTWARE ENGINEERING

Term 1 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Advanced Software Engineering Compulsory Module 1 5 0

Lecture:

Advanced Software Engineering Compulsory Module 1 0 2

Exercise:

Advanced Software Engineering Compulsory Module 1 0 2

Requirements Grading

-none-

Advanced Software Engineering

The module grading is weighted according to the CP-allocation

• Oral Examination

7

Compulsory Module– First Term (Winter Semester)

Course Track: Conception and Production

Module: German Language Course

MODULE: GERMAN LANGUAGE COURSE

Term 1 Credit Points 6 Language German

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

German Language Course Compulsory Module 1 6 0

Lecture:

German Language Course Compulsory Module 1 0 2

Exercise:

German Language Course Compulsory Module 1 0 2

Requirements Grading

-none-

German Language Course

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

8

Compulsory Elective Modules – First Term (Winter Semester)

Course Track: Conception and Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Mechatronics and Control Techniques for Production Plants

MODULE: MECHATRONICS AND CONTROL TECHNIQUES FOR PRODUCTION PLANTS

Term 1 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Mechatronics and Control Techniques for

Production Plants

Compulsory Elective

Module 1 5 0

Lecture:

Mechatronics and Control Techniques for

Production Plants

Compulsory Elective

Module 1 0 2

Exercise:

Mechatronics and Control Techniques for

Production Plants

Compulsory Elective

Module 1 0 2

Requirements Grading

Recommended: Machine Tools

Mechatronics and Control Techniques for Production

Plants

The module grading is weighted according to the CP-allocation

• Written Examination

9

Module: Micro- and Macrosimulation of Casting Processes

MODULE: MICRO- AND MACROSIMULATION OF CASTING PROCESSES

Term 1 Credit Points 4 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Micro- and Macrosimulation of Casting

Processes

Compulsory Elective

Module 1 4 0

Lecture:

Micro- and Macrosimulation of Casting

Processes

Compulsory Elective

Module 1 0 2

Exercise:

Micro- and Macrosimulation of Casting

Processes

Compulsory Elective

Module 1 0 1

Requirements Grading

Basic knowledge in numerical methods (e.g. finite element method)

Basic knowledge in materials science and continuum mechanics

Conservation equations

Numerical methods to solve systems of PDEs

Notion of thermodynamics (e.g. phase diagrams)

Micro- and Macrosimulation of Casting Processes

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

10

Module: Practical Introduction to FEM-Software I

MODULE: PRACTICAL INTRODUCTION TO FEM-SOFTWARE I

Term 1 Credit Points 3 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Practical Introduction to FEM-Software I

Compulsory Elective

Module 1 3 0

Lecture:

Practical Introduction to FEM-Software I

Compulsory Elective

Module 1 0 1

Practical Session:

Practical Introduction to FEM-Software I

Compulsory Elective

Module 1 0 2

Requirements Grading

-none-

Practical Introduction to FEM-Software I

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

11

Compulsory Elective Modules – First Term (Winter Semester)

Course Track: Conception

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Fandamentals of Lightweight-Design

MODULE: FUNDAMENTALS OF LIGHTWEIGHT-DESIGN

Term 1 Credit Points 4 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Fandamentals of Lightweight-Design

Compulsory Elective

Module 1 4 0

Lecture:

Fandamentals of Lightweight-Design

Compulsory Elective

Module 1 0 2

Exercise:

Fandamentals of Lightweight-Design

Compulsory Elective

Module 1 0 1

Requirements Grading

-none-

Fandamentals of Lightweight-Design

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

12

Module: Tensor Algebra and Tensor Analysis for Engineering Students I

MODULE: TENSOR ALGEBRA AND TENSOR ANALYSIS FOR ENGINEERING

STUDENTS I

Term 1 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Tensor Algebra and Tensor Analysis for

Engineering Students I

Compulsory Elective

Module 1 5 0

Lecture:

Tensor Algebra and Tensor Analysis for

Engineering Students I

Compulsory Elective

Module 1 0 2

Exercise:

Tensor Algebra and Tensor Analysis for

Engineering Students I

Compulsory Elective

Module 1 0 2

Requirements Grading

-none-

Tensor Algebra and Tensor Analysis for Engineering

Students I

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

13

Compulsory Elective Modules – First Term (Winter Semester)

Course Track: Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Control Engineering

MODULE: CONTROL ENGINEERING

Term 1 Credit Points 2 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Control Engineering

Compulsory Elective

Module 1 3 0

Lecture:

Control Engineering

Compulsory Elective

Module 1 0 2

Exercise:

Control Engineering

Compulsory Elective

Module 1 0 2

Requirements Grading

Basic knowledge in mathematics as defined in

the examination regulations.

Control Engineering

The module grading is weighted according to the CP-allocation

• Written Examination

14

Module: Machine Tools

MODULE: MACHINE TOOLS

Term 1 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Machine Tools

Compulsory Elective

Module 1 5 0

Lecture:

Machine Tools

Compulsory Elective

Module 1 0 2

Exercise:

Machine Tools

Compulsory Elective

Module 1 0 2

Requirements Grading

-none-

Machine Tools

The module grading is weighted according to the CP-allocation

• Written Examination

15

Module: Manufacturing Technology I

MODULE: MANUFACTURING TECHNOLOGY I

Term 1 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Manufacturing Technology I

Compulsory Elective

Module 1 5 0

Lecture:

Manufacturing Technology I

Compulsory Elective

Module 1 0 2

Exercise:

Manufacturing Technology I

Compulsory Elective

Module 1 0 2

Requirements Grading

-none-

Manufacturing Technology I

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

16

Module: Industrial Engineering and Ergonomics

MODULE: INDUSTRIAL ENGINEERING AND ERGONOMICS

Term 1 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Industrial Engineering and Ergonomics

Compulsory Elective

Module 1 5 0

Lecture:

Industrial Engineering and Ergonomics

Compulsory Elective

Module 1 0 2

Exercise:

Industrial Engineering and Ergonomics

Compulsory Elective

Module 1 0 2

Requirements Grading

-none-

Industrial Engineering and Ergonomics

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

17

Compulsory Modules – Second Term (Summer Semester)

Course Track: Conception and Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Continuum Mechanics

MODULE: CONTINUUM MECHANICS

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Continuum Mechanics Compulsory Module 2 5 0

Lecture:

Continuum Mechanics Compulsory Module 2 0 2

Exercise:

Continuum Mechanics Compulsory Module 2 0 2

Requirements Grading

-none-

Continuum Mechanics

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

18

Module: Multibody Dynamcis

MODULE: MULTIBODY DYNAMICS

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Multibody Dynamcis Compulsory Module 2 5 0

Lecture:

Multibody Dynamcis Compulsory Module 2 0 2

Exercise:

Multibody Dynamcis Compulsory Module 2 0 2

Requirements Grading

-none-

Multibody Dynamcis

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

19

Module: Computational Fluid Dynamics I

MODULE: COMPUTATIONAL FLUID DYNAMICS I

Term 2 Credit Points 4 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Computational Fluid Dynamics I Compulsory Module 2 4 0

Lecture:

Computational Fluid Dynamics I Compulsory Module 2 0 2

Exercise:

Computational Fluid Dynamics I Compulsory Module 2 0 1

Requirements Grading

-none-

Computational Fluid Dynamics I

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

20

Compulsory Modules – Second Term (Summer Semester)

Course Track: Conception

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Nonlinear Structural Mechanics

MODULE: NONLINEAR STRUCTURAL MECHANICS

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Nonlinear Structural Mechanics Compulsory Module 2 5 0

Lecture:

Nonlinear Structural Mechanics Compulsory Module 2 0 2

Exercise:

Nonlinear Structural Mechanics Compulsory Module 2 0 2

Requirements Grading

-none-

Nonlinear Structural Mechanics

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

21

Module: Failure of Structures and Structural Elements

MODULE: FAILURE OF STRUCTURES AND STRUCTURAL ELEMENTS

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Failure of Structures and Structural Elements Compulsory Module 2 5 0

Lecture:

Failure of Structures and Structural Elements Compulsory Module 2 0 2

Exercise:

Failure of Structures and Structural Elements Compulsory Module 2 0 1

Requirements Grading

-none-

Failure of Structures and Structural Elements

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

22

Compulsory Elective Modules – Second Term (Summer Semester)

Course Track: Conception and Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Welding and Joining Technologies

MODULE: WELDING AND JOINING TECHNOLOGIES

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Welding and Joining Technologies

Compulsory Elective

Module 2 5 0

Lecture:

Welding and Joining Technologies

Compulsory Elective

Module 2 0 2

Exercise:

Welding and Joining Technologies

Compulsory Elective

Module 2 0 2

Requirements Grading

-none-

Welding and Joining Technologies

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

23

Module: Finite Element Methods in Lightweight Design

MODULE: FINITE ELEMENT METHODS IN LIGHTWEIGHT DESIGN

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Finite Element Methods in Lightweight Design

Compulsory Elective

Module 2 5 0

Lecture:

Finite Element Methods in Lightweight Design

Compulsory Elective

Module 2 0 2

Exercise:

Finite Element Methods in Lightweight Design

Compulsory Elective

Module 2 0 1

Requirements Grading

-none-

Finite Element Methods in Lightweight Design

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

24

Module: Practical Introduction to FEM-Software II

MODULE: PRACTICAL INTRODUCTION TO FEM-SOFTWARE II

Term 2 Credit Points 3 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Practical Introduction to FEM-Software II

Compulsory Elective

Module 2 3 0

Lecture:

Practical Introduction to FEM-Software II

Compulsory Elective

Module 2 0 1

Practical Session:

Practical Introduction to FEM-Software II

Compulsory Elective

Module 2 0 2

Requirements Grading

Recommended: Practical Introduction to FEM-

Software I

Practical Introduction to FEM-Software II

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

25

Module: Modeling, Model Reduction and Simulation in Laser Processing - Laser

MODULE: MODELING, MODEL REDUCTION AND SIMULATION IN LASER

PROCESSING - LASER

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Modeling, Model Reduction and Simulation in

Laser Processing - Laser

Compulsory Elective

Module 2 5 0

Lecture:

Modeling, Model Reduction and Simulation in

Laser Processing - Laser

Compulsory Elective

Module 2 0 2

Exercise:

Modeling, Model Reduction and Simulation in

Laser Processing - Laser

Compulsory Elective

Module 2 0 2

Requirements Grading

-none-

Modeling, Model Reduction and Simulation in Laser

Processing - Laser

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

26

Module: Modeling, Model Reduction and Simulation in Laser Processing - Design

MODULE: MODELING, MODEL REDUCTION AND SIMULATION IN LASER

PROCESSING - DESIGN

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Modeling, Model Reduction and Simulation in

Laser Processing - Design

Compulsory Elective

Module 2 5 0

Lecture:

Modeling, Model Reduction and Simulation in

Laser Processing - Design

Compulsory Elective

Module 2 0 2

Exercise:

Modeling, Model Reduction and Simulation in

Laser Processing - Design

Compulsory Elective

Module 2 0 2

Requirements Grading

-none-

Modeling, Model Reduction and Simulation in Laser

Processing - Design

The module grading is weighted according to the CP-allocation

• Written Examination

27

Module: Reliable Simulation in the Mechanics of Materials and Structures

MODULE: RELIABLE SIMULATION IN THE MECHANICS OF MATERIALS AND

STRUCTURES

Term 2 Credit Points 6 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Reliable Simulation in the Mechanics of

Materials and Structures

Compulsory Elective

Module 2 6 0

Lecture:

Reliable Simulation in the Mechanics of

Materials and Structures

Compulsory Elective

Module 2 0 2

Exercise:

Reliable Simulation in the Mechanics of

Materials and Structures

Compulsory Elective

Module 2 0 2

Requirements Grading

-none-

Reliable Simulation in the Mechanics of Materials and

Structures

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

28

Module: Mechanics of Engineering Materials

MODULE: MECHANICS OF ENGINEERING MATERIALS

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Mechanics of Engineering Materials

Compulsory Elective

Module 2 5 0

Lecture:

Mechanics of Engineering Materials

Compulsory Elective

Module 2 0 2

Exercise:

Mechanics of Engineering Materials

Compulsory Elective

Module 2 0 1

Requirements Grading

-none-

Mechanics of Engineering Materials

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

29

Compulsory Elective Module– Second Term (Summer Semester)

Course Track: Conception

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Tensor Algebra and Tensor Analysis for Engineering Students II

MODULE: TENSOR ALGEBRA AND TENSOR ANALYSIS FOR ENGINEERING

STUDENTS II

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Tensor Algebra and Tensor Analysis for

Engineering Students II

Compulsory Elective

Module 2 5 0

Lecture:

Tensor Algebra and Tensor Analysis for

Engineering Students II

Compulsory Elective

Module 2 0 2

Exercise:

Tensor Algebra and Tensor Analysis for

Engineering Students II

Compulsory Elective

Module 2 0 2

Requirements Grading

Recommended: Tensor Algebra and Tensor

Analysis for Engineers I

Tensor Algebra and Tensor Analysis for Engineering

Students II

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

30

Compulsory Elective Modules – Second Term (Summer Semester)

Course Track: Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Manufacturing Technology II

MODULE: MANUFACTURING TECHNOLOGY II

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Manufacturing Technology II

Compulsory Elective

Module 2 5 0

Lecture:

Manufacturing Technology II

Compulsory Elective

Module 2 0 2

Exercise:

Manufacturing Technology II

Compulsory Elective

Module 2 0 2

Requirements Grading

-none-

Manufacturing Technology II

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

31

Module: Production Metrology

MODULE: PRODUCTION METROLOGY

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Production Metrology

Compulsory Elective

Module 2 5 0

Lecture:

Production Metrology

Compulsory Elective

Module 2 0 2

Exercise:

Production Metrology

Compulsory Elective

Module 2 0 2

Requirements Grading

-none-

Production Metrology

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

32

Module: Computational Modeling of Membranes and Shells

MODULE: COMPUTATIONAL MODELING OF MEMBRANES AND SHELLS

Term 2 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Computational Modeling of Membranes and

Shells

Compulsory Elective

Module 2 5 0

Lecture:

Computational Modeling of Membranes and

Shells

Compulsory Elective

Module 2 0 2

Exercise:

Computational Modeling of Membranes and

Shells

Compulsory Elective

Module 2 0 1

Requirements Grading

-none-

Computational Modeling of Membranes and Shells

The module grading is weighted according to the CP-allocation

• Oral Examination

33

Compulsory Modules – Third Term (Winter Semester)

Course Track: Conception and Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Computational Fluid Dynamics II

MODULE: COMPUTATIONAL FLUID DYNAMICS II

Term 3 Credit Points 3 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Computational Fluid Dynamics II Compulsory Module 3 3 0

Lecture:

Computational Fluid Dynamics II Compulsory Module 3 0 1

Exercise:

Computational Fluid Dynamics II Compulsory Module 3 0 1

Requirements Grading

Computational Fluid Dynamics I

Computational Fluid Dynamics II

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

34

Module: Simulation of Discrete Event Systems

MODULE: SIMULATION OF DISCRETE EVENT SYSTEMS

Term 3 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Simulation of Discrete Event Systems Compulsory Module 3 5 0

Lecture:

Simulation of Discrete Event Systems Compulsory Module 3 0 2

Exercise:

Simulation of Discrete Event Systems Compulsory Module 3 0 2

Requirements Grading

-none-

Simulation of Discrete Event Systems

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

35

Compulsory Modules – Third Term (Winter Semester)

Course Track: Conception

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Machine Design Process and Practical Applications of Computer-Aided Engineering Tools

MODULE: MACHINE DESIGN PROCESS AND PRACTICAL APPLICATIONS OF

COMPUTER-AIDED ENGINEERING TOOLS

Term 3 Credit Points 7 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Machine Design Process and Practical

Applications of Computer-Aided Engineering

Tools

Compulsory Module 3 7 0

Lecture:

Machine Design Process and Practical

Applications of Computer-Aided Engineering

Tools

Compulsory Module 3 0 2

Exercise:

Machine Design Process and Practical

Applications of Computer-Aided Engineering

Tools

Compulsory Module 3 0 2

Practical Session:

Machine Design Process and Practical

Applications of Computer-Aided Engineering

Tools

Compulsory Module 3 0 1

Requirements Grading

-none-

Machine Design Process and Practical Applications of

Computer-Aided Engineering Tools

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

36

Compulsory Modules – Third Term (Winter Semester)

Course Track: Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Quality Management

MODULE: QUALITY MANAGEMENT

Term 3 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Quality Management Compulsory Module 3 5 0

Lecture:

Quality Management Compulsory Module 3 0 2

Exercise:

Quality Management Compulsory Module 3 0 2

Requirements Grading

-none-

Quality Management

The module grading is weighted according to the CP-allocation

• Written Examination

37

Module: Simulation Techniques (Modeling and Simulation) in Manufacturing Technology

MODULE: SIMULATION TECHNIQUES (MODELING AND SIMULATION) IN

MANUFACTURING TECHNOLOGY

Term 3 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Simulation Techniques (Modeling and

Simulation) in Manufacturing Technology

Compulsory Module 3 5 0

Lecture:

Simulation Techniques (Modeling and

Simulation) in Manufacturing Technology

Compulsory Module 3 0 2

Exercise:

Simulation Techniques (Modeling and

Simulation) in Manufacturing Technology

Compulsory Module 3 0 1

Requirements Grading

-none-

Simulation Techniques (Modeling and Simulation) in

Manufacturing Technology

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

38

Module: Production Management A

MODULE: PRODUCTION MANAGEMENT A

Term 3 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Production Management A Compulsory Module 3 5 0

Lecture:

Production Management A Compulsory Module 3 0 2

Exercise:

Production Management A Compulsory Module 3 0 2

Requirements Grading

-none-

Production Management A

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

39

Compulsory Elective Modules – Third Term (Winter Semester)

Course Track: Conception and Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Modelling, Model Reduction and Simulation in Laser Processing - Applications

MODULE: MODELLING, MODEL REDUCTION AND SIMULATION IN LASER

PROCESSING - Applications

Term 3 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Modelling, Model Reduction and Simulation in

Laser Processing - Applications

Compulsory Elective

Module 3 5 0

Lecture:

Modelling, Model Reduction and Simulation in

Laser Processing - Applications

Compulsory Elective

Module 3 0 2

Exercise:

Modelling, Model Reduction and Simulation in

Laser Processing - Applications

Compulsory Elective

Module 3 0 2

Requirements Grading

-none-

Modelling, Model Reduction and Simulation in Laser

Processing - Applications

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

40

Module: Selected Topics of Inelasticity Theory

MODULE: SELECTED TOPICS OF INELATASTICITY THEORY

Term 3 Credit Points 6 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Selected Topics of Inelasticity Theory

Compulsory Elective

Module 3 6 0

Lecture:

Selected Topics of Inelasticity Theory

Compulsory Elective

Module 3 0 2

Exercise:

Selected Topics of Inelasticity Theory

Compulsory Elective

Module 3 0 2

Requirements Grading

Mechanics I – III

Recommended: Basic knowledge in

continuum mechanics and the theory of

materials

Selected Topics of Inelasticity Theory

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

41

Module: Molecular Mechanics and Multi-scale Modelling

MODULE: MOLECULAR MECHANICS AND MULTI-SCALE MODELLING

Term 3 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Molecular Mechanics and Multi-scale

Modelling

Compulsory Elective

Module 3 5 0

Lecture:

Molecular Mechanics and Multi-scale

Modelling

Compulsory Elective

Module 3 0 2

Exercise:

Molecular Mechanics and Multi-scale

Modelling

Compulsory Elective

Module 3 0 2

Requirements Grading

-none-

Molecular Mechanics and Multi-scale Modelling

The module grading is weighted according to the CP-allocation

• Oral Examination

42

Module: Mechanics of Forming Processes

MODULE: MECHANICS OF FORMING PROCESSES

Term 3 Credit Points 5 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Examination:

Mechanics of Forming Processes

Compulsory Elective

Module 3 5 0

Lecture:

Mechanics of Forming Processes

Compulsory Elective

Module 3 0 2

Exercise:

Mechanics of Forming Processes

Compulsory Elective

Module 3 0 2

Requirements Grading

-none-

Mechanics of Forming Processes

The module grading is weighted according to the CP-allocation

• Written Examination or

• Oral Examination

43

Compulsory Module– Third Term (Winter Semester)

Course Track: Conception and Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Mini Thesis

MODULE: MINI THESIS

Term 3 Credit Points 9 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Mini Thesis Compulsory Module 3 9 0

Requirements Grading

-none-

Quality Management

The module grading is weighted according to the CP-allocation

• Written Examination (written paper, 40-70 pages)

44

Compulsory Module– Fourth Term (Summer Semester)

Course Track: Conception and Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Industrial Internship

MODULE: INDUSTRIAL INTERNSHIP

Term 4 Credit Points 9 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Report, Colloquium;

Industrial Internship Compulsory Module 4 9 0

Requirements Grading

-none- Industrial Internship

-none-

45

Compulsory Module– Fourth Term (Summer Semester)

Course Track: Conception and Production

RWTH Aachen (Faculty 4 – Mechanical Engineering)

Module: Master Thesis

MODULE: MASTER THESIS

Term 4 Credit Points 20 Language English

Title Curricular

Embedding Term

Credit

Points SWS

Master Thesis:

Master Thesis Compulsory Module 4

20

0

Master Thesis Colloquium:

Master Thesis Compulsory Module 4 0

Requirements Grading

Inustrial Internship

Mini Thesis

At least 92 ECTS

Master Thesis

The grade will be formed from the arithmetical average accrding

to §18 ÜPO.