Post on 03-Nov-2019
Mobile CraneLTM 11200-9.1Max. Capacity: 1,200 tMax. Hoisting height: 188 mMax. Radius: 136 m
LTM 11200-9.12
Mobile Crane LTM 11200-9.1With maximum capacity universally useable
LTM 11200-9.1 3
The LTM 11200-9.1 with its capacity of 1,200 t is the strongest telescopic mobile crane in the market and offers the worldwide longest telescopic boom. A remarkable increase of the capacity is realized with the Y-telescopic boom suspension. Short erection times, an extraordinary mobility as well as a comprehensive comfort and safety configuration distinguish the mobile crane LTM 11200-9.1 from Liebherr.
•100mlongtelescopicboomand22mtelescopicboomextension(10m+6m+6m)•Capacity65tatthe100mlong,suspendedtelescopicboom•126mlongluffingflyjib•60.5mlongfixedjib,optionallyhydraulicallyadjustable•Fastandcomfortableerectionwithmarginalrequiredspace•Optimalforassembliesintheindustry,inthewindpowergenerationfieldandat
infrastructureprojects•Active,speeddependingrearaxlesteering,allaxlessteered•Economicaltransportation
LTM 11200-9.14
Erection of a portal crane
Load129.5teachcraneat max.21mradius
Crane 1:System T3YTelescopic boom 55 m + Y-suspension
Crane 2:System T7YTelescopic boom 53.3 m + Y-suspension
Large operation spectrum with high performance and variable boom systems
LTM 11200-9.1 5
Erection of a radio tower
Load9.5tto154mhoistingheightat31mradius
System T3YV2VENTelescopic boom 52.2 m + Y-suspension + adapter 20.2 m + luffing fly jib 90 m
LTM 11200-9.16
Erection of an absorber column
Load128tatmax.21mradius
System T7YTelescopic boom 65 m + Y-suspension
706050403020100 120 130 136 m1101009080
152 t 104 t 74 t 9,9 t 7,1 t59 t 46,5 t 36,5 t 26,2 t 20,3 t 14,3 t 2,1 t3,4 t
LTM 11200-9.1 7
Outstanding capacities at large radii with luffing fly jib
LTM 11200-9.18
100m-telescopicboom+Y-guyingsystem+fixedjib
100m-telescopicboom+Y-guyingsystem
52m-telescopicboom+Y-guyingsystem+luffingjib
Heightofhubofwindpowergenerator
Max. capacity atradius
Hook height System
80 m 94 t x 20 m 89 m T7YVENZF
100 m 76 t x 16 m 107 m T7YVEV2NZF
105 m 65 t x 16 m 114 m T7YVEV3V2NZF
Heightofhubofwindpowergenerator
Max. capacity atradius
Hook height System
80 m 84 t x 16 m 92 m T7Y
Heightofhubofwindpowergenerator
Max. capacity atradius
Hook height System
80 m 141 t x 18 m 90 m T3YVEN
100 m 97 t x 22 m 112 m T3YV2VEN
105 m 83 t x 24 m 117 m T3YV2VEN
120 m 58 t x 32 m 128 m T3YV2VEN
Optimized for the installation of wind power generators
LTM 11200-9.1 9
S2595
S2593
S2596
S2594
LTM 11200-9.110
Economical transportation
The chassis drives on the road with slewing platform, luffing cylinder and all four folding beams.
The chassis weight and the axle loads can further be reduced by dismantling of equipment components.
Axle 1-2 Axle 3-9 Total weight
Vehicle without telescopic boom 12 t 12 t 108 t
Vehicle without telescopic boom, without winches < 10 t < 12 t < 100 t
Vehicle without telescopic boom, without winches, without swing-out beams
< 9 t < 9 t < 76 t
The boom is transported separately on a low bed trailer. For this different variations are possible.
Variable boom transportation concept (examples)
100 m telescopic boom + Y-suspensionStated weights without boom lifting unit
Heel section + telescope 1
52 m telescopic boom
52 m telescopic boom + Y-suspension
100 m telescopic boom
34 t
52 t
77 t
75 t
100 t
LTM 11200-9.1 11
LTM 11200-9.112
Flexible driving on the job site
The LTM 11200-9.1 can drive on the job site with the better part of its equipment on board.•Reductionofmobilisationtimes•Drivinginsideofawidthof3m•Safedrivingduetoalowcentreofgravity•Boomassemblyoutsideofthejobsiteatlimited
site space
Simple and speedy boom assembly
LTM 11200-9.1 13
The assembly of the boom on the job site can optionally be carried out without an aux-iliarycrane.Bymeansof four special sup-port jacks the boom is lifted so that the low bed trailer can move off and the chassis of the LTM 11200-9.1 can be positioned below the boom to the front or the rear. The boom can now be mounted to the chassis with a few manual actions.
S2596
LTM 11200-9.114
Economical crane assignment logistic
A multitude of heavy duty crane operations can be per-formed with a small number of transportation vehicles. For the erection of a wind power plant with a hub height of 80 m and a component weight of up to 80 t for example only four transportation units are necessary:
Crane LTM 11200-9.1 – self propelled
Transport of telescopic boom T7 – 100 m
Transport of the Y-suspension plus 30 t ballast
Transport of 52 t ballast incl. base plate
86°
97
65
57
8455
54
35
34,5
35
21,2
21,7
7,6
5,5
7,3
0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 m0
4
8
12
16
20
24
28
32
36
40
44
48
52
56
60
64
68
72
76
80
84
88
92
96
100
104
108m
S2528
22,5
T 100 m
T 94,2 m
T 88,3 m
2,6
3,8
4,0
T 100 m
T 94,2 m
T 88,3 m
360° ENY
82 t100 m
T7
LTM 11200-9.1 15
LTM 11200-9.116
Counterweight
The ballast concept of the LTM 11200-9.1 devel-oped by Liebherr offers numerous advantages for the crane operator.
•Dimensionsandweightsoftheballastplatesareideally adapted to the low bed trailers
•Completeballastassemblywithoutanauxiliarycrane
•Higheconomyduetocompatibilityoftheballastweights with those of other large Liebherr cranes
•ComfortableandsafeballastingwiththemobilecontrolanddisplayunitBTT
Baseplate 22t16 identical plates 10 t each 160 t4 identical plates 5 t each 20 t
Totalballast 202t
LTM 11200-9.1 17
The large scale ballast distribution with two ballast stacks on each side provides by the low working height for improved safety and ergonometric working conditions.
Simple pinning of the base plate to the ballasting device
Self assembly of hoist gear 2
LTM 11200-9.118
Chassis and drive technology
Hydro pneumatic axle suspension „Niveaumatik“•Maintenance-freesuspensioncylinders•Largedimensionstocopewithhighaxleloads•Springtravel+175/-125mm•Highsidestabilityatcornering•Choiceofthedrivingconditionsbyfixedprogrammes
Air operated disk brakes•Higherbrakingpower,betterbrakecontrol•Improvedtrackstability•Nobrakefadingathigheroperationtemperatures•Higherservicelife•Shorterworkingtimesforchangingofthebrakepads•Brakepadswithwearindication
Intarder and Telma-Eddy current brake as standard•Nowear,lowmaintenancesystem•Increasedsafetyduetofastactivationinmilliseconds•Reductionofoperationcosts•Highcomfortduetobrakingabsolutelywithoutjolts•Environmentallyfriendlybrakesystem,noemission
and respirable dust
Chassis engine•Powerful8-cylinderturbodieselenginewith
500kW/680HP,max.torque3,000Nm•Automated12-speed-shiftsystemZF-TC-TRONICwith
torque converter and intarder directly at the gearbox offers high efficiency and best comfort
•Axle1,2,4and5aredrivenaxles
Superstructure engine•6-cylinderLiebherrturbodieselengine,
270kW/367HP,max.torque1,720Nm•Optimizedfuelconsumptionduetoelectronicengine
management
LTM 11200-9.1 19
Active rear axle steering•Electrohydraulicsteeringoftherearaxlesdepending
on the speed and the steering angle of the front axle •Distinctreductionofthetyrewear•Improvementofthemanoeuvrability•Stabiledrivingperformance•All9axlessteerable,noliftingofthemiddleaxles
during crab steering
High safety standards •Centralizingcylindersforautomaticstraighteningoftherear
axles in case of failure •Twoindependenthydrauliccircuitswithwheeldrivenandmotor
driven hydraulic pumps •Twoindependentsteeringcomputers
5 steering programmes•Programmeselectionbysimplepushbutton•Cleararrangementofthecontrolelementsanddisplays•Programmeschangeableduringdriving•Crabsteeringcontrolledcomfortablybythesteeringwheel
Variable steering concept
P1Roadsteering
P2All-wheelsteering
P3Crabsteering
P4Reducedswingout
P5Independentrearaxlesteering
LTM 11200-9.120
Comfort and functionality
The modern driving cab as well as the movable crane cab offer a comfortable and func-tional working place. The control elements and displays are arranged according to er-gonometric factors. Thus a safe and wear free working is assured.
The driver’s cab•Corrosionresistant•Allaroundsafetyglazing•Tintedwindows•Heatableandelectricallyadjustable
outside mirrors •Aircushioneddriver’sseatwithlumbar
support•Engineindependentadditionalheating,
air condition
The crane cab•Optimizedheatingandventilationsystem,
automatic temperature control, engine independent additional heating, air condition
•Extendedfieldofviewduetolargescreens
•Cranedriverseatwithlumbarsupport,multiply adjustable
•20°tiltabletotherear•Canhydraulicallybeloweredfora
comfortable access
LTM 11200-9.1 21
Crane supporting – fast, comfortable and safe •BTT–BluetoothTerminal,mobilecontroland
display device •Electronicinclinationdisplay•Fullyautomaticlevelingbypushbutton•Displayofsupportingforces•Enginestart/stopandspeedregulation•Lightingofthesupportareawith4integrated
floodlights •Strokeofsupportingcylinders750mm•Foldingbeamsslewable,2-foldtelescopable
Safe working with well-thought-out solutions The supporting, the boom and counterweight assembly as well as the attachment of additional equipment are de-signed for speed, safety and comfort. For the safety of the operating personnel ascents, holding grips and railings are furnished.For the observation of the winches and the Y-suspension in operation mode cameras are installed, which transfer their pictures to the crane cab. Likewise a back-up camera system for a safe and comfortable reversing is in place.
LTM 11200-9.122
Intelligent crane control
For functional and safe crane operation, the LICCON computer systemThe soft- and hardware of the mobile crane control is de-velopedbyLiebherrin-house.ThecentreistheLICCONcomputer system (Liebherr Computed Control).•IntegratedLML-loadmomentlimiter•Keycomponentsarein-housemanufacturedby
Liebherr•Guaranteedavailabilityofspareparts•Worldwideprovenunderthemostdifferentclimate
conditions •Operatorfriendly
The data bus technology Liebherr mobile cranes are completely interlaced by the data bus system. All important electric and electronic components are equipped with own micro processors and communicate with each other by only limited data cables. For the special demands of the mobile crane Liebherr has developed own data bus systems (LSB –Liebherr-System-Bus).Thedatabustechnologyimprovesthe reliability, the comfort and the safety for road driving and crane operation:•Higherreliabilityduetoremarkablelesselectriccables
and contacts •Continuousselftestingofthe„intelligentsensors“•Comprehensivediagnosispossibilities,fastfault
finding
LTM 11200-9.1 23
BTT-Bluetooth TerminalFor the remote control of crane assembly functions like e.g. supporting, boom assembly and the ballasting •Freeviewandproximitytotheassemblywork•Highercomfortandeconomy
The LICCON work planner•Computerprogrammeforplanning,simulationand
documentationofcraneoperationsatthePC•Displayofallloadchartsbelongingtoaspecificcrane•Automaticsearchforthesuitablecranebyinputoftheloadcase
parameters load, radius and hoisting height •Simulationofcraneoperationswithdrawingfunctionsand
display of support forces
LTM 11200-9.1
PN178.00.E02.2013
Liebherr-WerkEhingenGmbHPostfach1361,89582Ehingen,Germany +49 7391 502-0, Fax +49 7391 502-3399www.liebherr.com, E-Mail: info.lwe@liebherr.comwww.facebook.com/LiebherrConstruction
The pictures contain also accessories and special equipment not included in the standard scope of delivery. Subject to modification