Post on 09-May-2018
LTM 1030-2.1Mobile craneMax. lifting capacity: 35 tMax. lifting height: 44 mMax. working radius: 40 m
LTM 1030-2.12
Mobile crane LTM 1030-2.1Compact and economic
LTM 1030-2.1 3
A long telescopic boom, high capacities, an extraordinary mobility as well as a comprehensive comfort and safety configuration marks the mobile crane LTM 1030-2.1 from Liebherr. The 35 ton crane offers state-of-the-art technology for more convenience for the practical operation.
•30mlongtelescopicboom
•15mlongdoubleswingawayjib
•24ttotalweightincl.2.3tballastandswingawayjibat12taxleload
•Carrierwidth2.55mwithtyres445/95R25(16.00R25)
•Greatoperationalflexibilityduetotopcapacitieswithfullandpartialballast
•Sensitiveworkingbyelectroniccranecontrol
•LICCON2-controlwithmobiledisplayunitBTT
•Pneumaticdiscbrakes
•Wirelessremotecontrol(option)
LTM 1030-2.14
Drivetrain
•6-cylinderMercedes-Benzdieselengine, 205 kW/278 HP, max. torque 1100 Nm
•Powershiftgearboxwithautomatic gearchangingZFType6WG210, 6forward,2reversegears
•Torqueconverterandlock-upclutch
•Axles1and2driven
445/95 R 25 (16.00 R 25) 12 t 12 t
315010310
360
0
17°19°
852810153
500
6305
2550
430
060
00
6305
R = 6560R = 7350 R = 7690
S2357.02
LTM 1030-2.1 5
State-of-the-art chassis and drive technology
Hydro-pneumaticsuspension “Niveaumatik”
•Maintenance-freesuspensioncylinders
•Largedimensionstocopewith high axle loads
•Suspensiontravel+100/-100mm
•Highlateralstabilitywhencornering
•Choiceofdrivingstatesusingfixed programmes
High mobility and cost effectiveness
A powerful six-cylinder turbo diesel engine with 205 kW/278 HP ensures swift driving performance. The ZF-powershift gearbox with automatic gear changing provides best manoeuvrability and high comfort.
•Minimumcrawlingspeedbytorqueconverter
•ABVautomaticlockingpreventerwithASR-driveslipcontrol
•Crabsteering
•Telmaeddycurrentbrakeoptional,wearfreeandcomfortable
Compact, agile and weight-optimised
Thanks to its extremely compact design, the LTM 1030-2.1 can operate on the smallest of construction sites. At an axle load of 12 t, it can drive with up to 2.3 t of counterweight plus the swing away jib, making it flexible and economical to use.
•Chassislengthonly8.53m
•Smallestturningradiusonly6.56m
•Chassiswidthonly2.55m,evenwith445/95R25tyres(16.00R25)
•Tailswingradiusonly3.15 m
Pneumaticdiscbrakes
•Highbrakingpower,improvedcontrol
•Improveddirectionalstability
•Noreductionofbrakingforceathighbrakingtemperatures(fading)
•Longerservicelife
•Shorterlabourtimesforchangingthebrakingpads
•Brakepadswithwearindicators
LTM 1030-2.16
Thedriver’scab
•Corrosion-resistant
•Safetyglassonallsides
•Tintedglass
•Heatedandelectricallyadjustable outside mirrors
•Air-sprungdriver’sseatwithlumbarsupport
570
LTM 1030-2.1 7
Supportingthecrane– fast,comfortableandsafe
•BTTbluetoothterminal, mobile control and display unit
•Electronicinclinationdisplay
•Fullyautomaticlevellingby push button
•Enginestart/stopandspeedcontrol
•Supportarealightingwithfour integrated lights
•Supportcylinderstroke:570mm
•One-stageoutriggerbeams,fully hydraulic, low-mainte-nance extension system
Modern driver’s cab and crane cabBoththemoderndriver’scabandthecranecabofferacomfortableandfunc-tional working environment. The control elements and displays are ergonomi-cally arranged. Thus a safe and fatigue free working is assured.
Speedy and safe set-upSettingoftheoutriggers,counterweightassemblyandattachmentofadditional equipment have all been designed with speed, safety and comfort in mind. Specificascentsandhandholdsareprovidedtoensurethesafetyoftheoperat-ing staff.
Comfort and functionality
Thecranecab
•Largefieldofvision
•Safetyglasing
•Tintedscreens
•Cranedriverseatwithlumbarsupport,multiple adjustable
•Heatandnoiseinsulatedinteriorlining
•Corrosionresistent
•Workingfloodlights
•Engine-independentheating
LTM 1030-2.18
Provenhydro-mechanicaltelescopingsystem
•Reliablesinglestepdoubleactinghydrauliccylinder
•Lowcentreofgravityduetodoublesheaveblock for telescopic section 2 and 3
•Section1extended/retractedbyhydrauliccylinder, sections 2 and 3 by ropes
•Hightelescopableloads
LTM 1030-2.1 9
High-capacity, long telescopic boom and functional lattice extensionsThe telescopic boom comprises of the base section and three telescopic sections which can be extended comfortably by a hydro-mechanic extension system to any requested length.
•30mlongtelescopicboom
•8.6m–15mlongdoubleswingawayjib,attachableat0°,20°and40°
High lifting capacities both with full and partial counterweight offer a wide operational range
•Highlateralstabilityduetotheovalboomprofile
•Telescopingunderload
•Liftingcapacity8.3tat30mliftingheight
•Maximumhookheight:44m
•Maximumradius:40m
Thedoubleswing awayjib
High lifting capacities and flexible boom system
12 t 12 t
LTM 1030-2.110
Counterweight assembly – a matter of minutes
•Multiplecounterweightvariations2.3t,3.4tand5.5t
•Rapidballastingwithkeyholetechnologyfromwithinthecranecab(option)
•Compactcounterweightdimensions,at5.5tcounterweight only 2.31 m counterweight width
•Tailswing:only3.15m
•24ttotalweightincl.2.3tcounterweightandswingawayjibat12taxleload
Variable counterweight
Thehoistgear
•Hoistwinchwithintegratedplane-tary gear and spring loaded multiple disk brake
•Linepull33kNattheouterlayer
•Max.linespeed120m/min
12 t 12 t
LTM 1030-2.1 11
With tried-and-tested componentsThe drive components for crane operation are designed for high performance and ensure sensitive and precise load handling. They are specially designed to suit the crane’susageandhavebeensubjectedtohardendurancetests.
•Cranedrivefromchassisdieselengine
•Optimizedfuelconsumptionbyelectronicenginemanagement
•Diesel-hydrauliccranedrive,openhydrauliccircuitswithelectronic “LoadSensing”control,4workingmovementssimultaneouslypossible
•Electric/electronicSPScranecontrolthroughtheLICCONcomputersystem
•Comfortarmrestcontrolwith2self-centering,4-foldmultifunctionaljoysticks,stepless control of all crane movements, with vibration joysticks for slewing gear and winch operation, electronic pilot control
•Slewingsystemchangeablefromopentohydraulicallylockedasstandard, thus the movement can be adjusted to the different operational conditions, e. g. sensitive control for assembly work or fast cycle work
High-power crane drive
Theslewinggear
•Planetarygear,springloadedmulti-diskbrake
•Slewingspeedfrom0–2.4rpmstepless adjustable
•Slewinggearchangeablefromopen to hydraulically locked
Centralisedlubrication
•Centralisedlubricationsystemasstandard for slewing ring, boom bear-ings, luffing ram and winch bearings
•Uniformapplicationoflubricant
•Lubricantlevelvisibleintransparentcontainer at all times
Basiccounterweight 2.3tAdditional counterweight 3.2 tTotal 5.5t
2.1 t
1.1 t
2.3 t
LICCON-monitor
Controlsensorswithtouch-displays
Controlunit
Telescoping cylinder
Luffing cylinder
Controlblock
Hoist gearSlewing
gear
Hydraulic swivel
VariabledisplacementpumpDieselengine
Sensors
Geartypepump
Powershift gearbox
Torque converter
LTM 1030-2.112
TheLICCONtestsystem
•Rapidlocalisationofproblems on screen without any measuring instruments
•Displayoferrorcodesanddescrip-tions
•Convenientinteractivefunctionsformonitoring all inputs and outputs
•Displaysoffunctionsandallocation of sensors and actuators
LTM 1030-2.1 13
TheLICCONworkingarealimiter(option)
•Reliefofthecranedriverbyautomaticmoni-toring of working area limits like bridges, roofs, etc.
•Simpleprogramming
•Fourdifferentlimitingfunctions: -Sheaveheadheightlimiting - Limiting of radius - Limiting of slewing - Limiting of borders
TheLICCONworkplanner
•Computerprogrammeforplanning, simulating and documenting crane operationsonaPC
•Representationofallthecrane’sloadcharts
•Automaticsearchforsuitablecranebased on entry of load, radius and lifting height parameters
•Simulationofcraneoperationswithoutline functions and supporting force display
For functional and safe crane operation: the LICCON computer system
The soft and hardware of the mobile crane control is developed by Liebherr in-house.ThecentreistheLICCONcomputersystem(LiebherrComputedControl).
•IntegratedLMLloadmomentlimiter
•Keycomponentsarein-housemanufacturedbyLiebherr
•Guaranteedsparepartsavailability
•Worldwideprovenunderthemostdifferentclimateconditions
•Operatorfriendly
ThesecondcontrolgenerationLICCON2istheresultofacontinuousdevelop-ment by the Liebherr specialists and enables the adaption to the constantly in-creasing demands of the markets due to its modern and future oriented control.
The data bus technology
Liebherr mobile cranes are completely interlaced by the data bus system. All important electric and electronic components are equipped with own micro-processors and communicate with each other by only limited data cables. For the special demands of the mobile crane Liebherr has developed own data bus systems(LSB–Liebherr-System-Bus).Thedatabustechnologyimprovesthereliability,thecomfortandthesafetyforroaddrivingandcraneoperation:
•Higherreliabilityduetoremarkablelesserelectriccablesandcontacts
•Continuousselftestingofthe„intelligentsensors“
•Comprehensivediagnosispossibilities,fastfaultfinding
Intelligent crane control
LTM 1030-2.114
Colourmonitor
The readability of the data on themonitoroftheLICCON2control unit in the crane cabin is improved by the colour display. Warning indications and crane utilisation are more clearly visible.
Touchdisplay
Belowthejoysticksinte-grated in the arm rest touch displays are provided with which various working func-tionscanbeselected.Besideothers these are the drive and steering programmes of the carrier, the axle suspen-sion, the supporting of the crane, the adjustment of the working floodlights as well as the heating and ventilation control.
LTM 1030-2.1 15
Attaching and detaching the hook block
TheBTT-Bluetoothterminalallowsthecranedrivertoattachthehookblockordetach it from the front bumper within view by remote control of the hoist gear and the luffing cylinder of the telescopic boom.
Crane supporting
ByuseoftheBTTthemobilecranewillbesetupcomfortablyandsafely.Enginestart/stop and speed regulation, electronic inclination display and automatic levellingarestandard.OptionallytheBTTcanalsodisplaytheoutriggerforces.
LICCON2 – safe and comfortable
Wirelessremotecontrol(option)
All crane movements can be controlled outsidethecranecab.Bythissystemthe economy of crane operations is enhanced.
•Freevisibilityandclosenesstotheload
•Preventionofcommunicationerrorsbetween crane driver and jobside personnel
•Independentattachingoftheloadbythe crane driver
Liebherr-WerkEhingenGmbHPostfach1361,89582Ehingen,Germany+497391502-0,Fax+497391502-3399www.liebherr.com,E-Mail:info.lwe@liebherr.com
PN200.01.E03.2012 Theillustrationsalsocontainaccessoriesandspecialequipmentwhicharenotcontainedinthestandardscopeofdelivery.Subjecttomodifcations.