Post on 07-Apr-2018
Mk- Ckh vkj vECksMdj jk"Vªh; izkS|ksfxdh laLFkku
DR. B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY
Tkh Vh jksM ckbZ ikl] tkya/kj&ƒ††Œƒƒ] iatkc ¼Hkkjr½
G T Road Bye Pass, Jalandhar-144011, Punjab (India)
List of topics for presentation during Interview for Asstt Prof (Contract) in
TEQIP Institutions
Chemical Engineering
Sr.No. Title for presentation
Chemical Engineering
1. Computational Fluid Dynamics
2. Gas-Liquid-Solid Reactions
3. Heat Exchangers with phase-change
4. Multi-component Distillation
5. Pumps: Selection and Design
6. Statistical Thermodynamics
7. Carbon Dioxide Sequestration Techniques
8. Nano Technology and Chemical Engineering
9. Hydrogen and Fuel Cell Technology
10. Recent Trends in Chemical Engineering
Petroleum Engineering
1. Integrated Reservoir Management
2. Enhanced Oil Recovery
3. Reservoir Fluid Properties and Phase Equilibria: “PVT”
4. Drilling engineering-hydraulics optimization
5. Hydrocarbon exploration
6. Reservoir simulation
7. Low Cost Methods for Improved Oil and Gas Recovery
8. Risk Analysis Applied to Petroleum Engineering
9. Gas Shales
10. Carbon Sequestration
Civil Engineering
Sr.No. Title for presentation
1. Soil Mechanics
2. Foundation Engineering
3. Rock Mechanics
4. Engineering Geology
5. Ground Improvement
6. Concrete Technology
7. Design of Concrete Structures
8. Design of Steel Structures
9. Structural Analysis
10. Strength of Materials
11. Building Materials
12. Building Construction
13. Fluid Mechanics
14. Irrigation Engineering
15. Design of Hydraulic Structures
16. Water Supply Engineering
17. Waste Water Engineering
18. Pre-stressed Concrete
19. Construction Machinery
20. Construction planning and Management
21. Estimating and Costing
22. Highway Engineering
23. Railway Engineering
24. Airport and Harbour Engineering
25. Survey and Remote Sensing
Geology Engineering
1. Crystallography and Mineralogy
2. Petrology
3. Structural Geology
4. Geological work of rivers and Oceans
5. Ground Water
6. Earthquake and Tsunamis
7. Site investigations
8. Landslides and Mass Movement
9. Stratigraphy of India
10. Environmental Geology and Geotechnology
11. Survey and Remote Sensing
Computer Science and Engineering
Sr.No. Title for presentation
1. Agile Software Development
2. Extreme Programming
3. Database Security Issues and Challenges
4. High Performance Computing
5. Advances in Computer Networks,
6. Big Data & Data Analytics,
7. Data Mining and Warehousing,
8. Artificial Intelligence and Machine Learning
9. Deep Learning Algorithms
10. Distributed Computing,
11. Opportunities, Challenges and Threats in Cyberspace
12. Cryptography and Network Security
Information Technology
Sr.No. Title for presentation
1. Big Data & Data Analytics
2. Cloud Computing
3. Internet of Things
4. Digital Watermarking
5. Data Mining and Data Warehousing
6. Biometric Security System
7. Opportunities, Challenges and Threats in Cyberspace
8. Intrusion Detection Systems
9. Mobile Computing
10. Enterprise Resource Planning
11. Pervasive Computing
Chemistry
Sr.No. Title for presentation
1. Phase Equilibria
2. Molecular Spectroscopy
3. Surface Chemistry And Adsorption
4. Coordination Chemistry
5. Symmetry And Group Theory
6. Green Chemistry
7. Supramolecular Chemistry
8. Fuel And Lubricants
9. Water And It's Treatment
10. Nanomaterials And Charaterizaion Techniques
11. Electrochemistry
12. Composites
Physics
Sr.No. Title for presentation
1. Fundamentals of Laser
2. Theory of Relativity
3. Maxwell's Equation
4. Nanomaterials
5. Crystal Structure
6. Electrical Properties of Material
7. Magnetic Properties of Material
8. Dielectrics
9. Fibre Optics
10. Fundamental Concepts of Quantum Mechanics
Industrial and Production Engineering
Sr
No
Topics for power point
Presentations
Contents
1. Engineering Materials
Structure and properties
2. Engineering Mechanics
Equations of equilibrium, Statics and
Dynamics
3. Theory of Machines
Analysis of planar mechanisms, CAMS and
followers; governors and fly wheels
4. Machine Design Design of gears
5. Thermal Engineering
Bernoulli’s equation, flow through pipes,
equations of continuity and momentum,
capillary action, contact angle and wetting;
6. Fluids Engineering Calculation of work and heat for systems
and control volumes
7. Casting
Analysis of solidification and microstructure
development; design of gating and riser
8. Metal Forming
Stress-strain relations in elastic and plastic
deformation;
9. Joining of Materials
Principles of welding processes, process
parameters and its influence on quality of
the product
10. Powder Processing
Mechanics of the process
11. Polymers and Composites
Mechanics of the process
12. Machine Tools and Machining
Mechanics of cutting, Tool life equation,
economics of machining, thermal aspect of
machining
13. Non-traditional Manufacturing
Effect of process parameters on MRR and
product quality of non-traditional machining
processes
14. Computer Integrated
Manufacturing
Drives and controls used on CNC machines
15. Metrology Tolerance Analysis in manufacturing and
assembly, Interchangeability, DAQ
16. Inspection Inspection of screw threads and gears
17. Quality Management Statistical quality control, six sigma, TQM
18. Reliability RAM analysis, FMEA, System Reliability
19. Maintenance TPM, RCM, Proactive Maintenance, PM
Optimization
20. Product Design and
Development
Product life cycle; standardization,
simplification, diversification, value
engineering and analysis, concurrent
engineering;
21. Work System Design Productivity – concepts and measurements,
ergonomics
22. Facility Design Assembly line balancing
23. Engineering Economy Elementary cost accounting and methods of
depreciation; break-even analysis
24. Costing Techniques for evaluation of capital
investments, financial statements, time-cost
trade-off, resource leveling.
25. Production Control Forecasting techniques, master production
scheduling; MRP and MRP-II; Lean
Manufacturing
26. Project Management PERT and CPM
27. Industiral Automation Pneumatics/Hydraulics/PLCs, IIOT/Industry
4.0
28. Mechatronics Microcontrollers, Sensors and actuators
29. Additive Manufacturing Rapid Prototyping techniques
Mathematics
Sr.No. Title for presentation
1. Applications of wavelets,
2. Applications of finite element methods in science and engineering,
3. Topology and its various applications,
4. Applications of Beta and Gamma distributions,
5. Applications of game theory in Industrial Problems,
6. Applications of network analysis,
7. Eigen value and eigen vectors and their applications
8. Partial differential equations and their importance,
9. Applications of Group Theory in Chemistry and Chemical Engineering,
10. Integral equations and their importance.
11. Applications of sequencing,
12. Modelling and simulations.
Instrumentation and Control Engineering
Sr.No. Title for presentation
1. Control Theory and Applications
2. Robust Control
3. Robotics and Artificial Intelligence
4. High Speed Networks and Sensor Networks
5. Biomedical Instrumentation
6. Process Control
7. Intelligent Instrumentation and Control
8. Power System-Operation and Control
9. Biomedical Imaging and Signal Processing
10. Virtual Instrumentation
Mechanical Engineering
Sr.No. Title for presentation
13. Laws of thermodynamics
14. Air standard cycles/ Refrigeration Cycles
15. Fluid Kinematics
16. Conduction heat transfer
17. Hydraulic/ Steam turbines
18. Simple and complex stress analysis
19. Bending and torsion
20. Design of Gears/fasteners/springs
21. Rigid Body Mechanics
22. Different Mechanisms used in Machines
Bio Technology
Sr.No. Title for presentation
1. Microbial growth and product formation kinetics
2. Heat sterilization of large scale fermentation media
3. Scale Up of bioreactors
4. Kinetics of enzyme catalyzed reactions in free and immobilized
states
5. Bioreactors for animal cell culture
6. Bioreactors for suspension and immobilized microbial cultures
7. Application of Recombinant DNA Technology
8. Aerobic processes of secondary treatment for waste
9. Instrumentation and control of bioprocesses
10. Separation of soluble products from fermentation broths
Electronics and Communication Engineering
Sr.No. Title for presentation
1. Digital/Analog VLSI Design
2. RF and Microwave
3. Biomedical signal/Digital signal/image processing
4. Digital Electronics/system design
5. Electronic Devices and Circuits
6. Microprocessors and Microcontroller
7. Digital/Analog wireless communication
8. Optical communication
9. Soft computing
10. Microelectronics
Textile Technology
Sr.No. Title for presentation
Spinning
1. Raw material as a factor influencing the spinning process , productivity
and yarn quality
2. Blending of manmade fibres with wool to meet varied desires and
demands of the worldwide consumer markets
3. Selection of blend constituents to produce yarn or fabric with
improved functional properties
4. Some significant developments in spinning preparatory process to
improve yarn quality and productivity
5. The reasons behind the structural differences of compact, rotor ,
friction and air jet spun yarns
6. The classimat faults and its analysis by the optical method
Weaving
1. The factors which are influencing the sizing performance
2. The control of yarn tension in autoconer machine
3. Movement of Sley/kinematics of Sley
4. Mechanics of Beat-up
5. Picking mechanism of shuttle system
6. Warp yarn tension during weaving
Fibre Science
1. Essential and desirable properties of fiber forming polymers and textile
fibers.
2. Effect of molecular arrangement and molecular weight on properties of
polymers/fibers and determination of molecular weight.
3. Manufacturing methods of manmade fibres and their comparisons.
4. Applications of X-ray diffraction in textiles.
5. Creep and stress relaxation behavior of textiles.
6. Hysteresis of moisture absorption in textiles and concept of heat of
wetting.
7. Thermal characterization of textile fibres.
8. Application of IR spectroscopy in textiles.
9. Heat setting of textile fibres.
10. Characterization of Physical structure of textile fibres
Textile Testing
1. Various principles of measurements of fibre fineness.
2. Concept of cotton fibre uniformity and its measurement.
3. Factors affecting tensile test results.
4. Load elongation curve of textile fibres and various parameters
obtained from it.
5. Evenness testing of yarns, nature and causes of irregularities,
principles and methods of evenness testing.
6. Variance - length curves and spectrogram analysis of yarn
unevenness.
7. Measurement of fabric low stress mechanical properties.
8. Fabric stiffness, drape and handle and their measurements.
9. Thermal comfort and resistance of textile fabric.
10. Different methods and principles of tensile testing of textiles.
Technical Textiles
1 Definition and scope for technical textiles.
2 Brief idea about various technical fibres.
3 Applications of textiles in Filtration.
4 Geotextiles.
5 Medical textiles.
6 Sewing threads.
7 Protective clothing.
8 Functional requirement of textiles in defence including ballistic
protection materials and parachute cloth.
9 Functional requirement of textiles for airbags and belts.
Chemical Processing
1. Role of fibre structure in dyeing of textile fibres and dye-fibre
interaction through physical and chemical forces.
2. Dyeing of synthetic fibres in HTHP machines.
3. Dyeing of nylon with acid dyes
4. Dyeing of cotton with vat dyes
5. Discharge styles of printing of polyester and its blends.
6. Durable press finishing of textiles.
7. Water repellent and flame retardant finishes on man mades and
blends.
8. Basic criteria for combining pretreatment methods, combined desizing
and bleaching, scouring and bleaching, desizing – scouring.
9. Fastness determination of dyed textiles.
10. Thermodynamic study of dyeing: Study of vat dye on cotton, acid dye
on wool and nylon, Dyeing equilibrium and concept of half time dyeing.
Humanities and Management (English)
Sr.No. Title for presentation
1. Cinema and Trauma
2. Children's Literature
3. Science and 19th Century for Technocrats
4. Role of Business Communication for Technocrats
5. The importance of history while writing different narratives
6. Psychology and the modern novel
7. Presentation Skills in Business Communication
8. Travelogues in 21sth century
9. Barriers in communication
10. Effects of Media and Mode on communication