Post on 25-Apr-2018
2002 No.172E NEW PRODUCT RELEASE
Open Field Network CC-Link AJ65SBTB1-8T1, AJ65SBTB2-8T1, AJ65SBTB2-16T1, AJ65SBTC1-32T1, AJ65SBTB1-16DT3, AJ65SBTB1-32DT3, AJ65SBTB32-8DT2, AJ65SBTB32-16DT2, AJ65SBTC4-16DT2, AJ65SBTC1-32DT2, AJ65SBTC1-32DT3 CC-Link system compact remote I/O modules
New!
MITSUBISHI
2
[Features]
(1) Suitable for systems that control light load devices, i.e. LED indicators. These modules use transistor output that generates less leakage current when output is off. Since the output leakage-current is small, it prevents load devices that operate at small currents, such as LED indicators, from malfunctioning (the leakage current is 0.1mA or less when the output is off).
(2) The AJ65SBTB1-16DT3, AJ65SBTB1-32DT3 and AJ65SBTC1-32DT3 are suitable for systems that require high-speed response. These models respond to input within 0.2ms at power on/off.
[Difference between old and new models.]
The following table shows the differences between old and new models. Item New model Old model
AJ65SBTB1-8T1 AJ65SBTB1-8T AJ65SBTB2-8T1 AJ65SBTB2-8T AJ65SBTB2-16T1 AJ65SBTB2-16T
Transistor output model
AJ65SBTC1-32T1 AJ65SBTC1-32T AJ65SBTB1-16DT3 AJ65SBTB1-16DT1 AJ65SBTB1-32DT3 AJ65SBTB1-32DT1 AJ65SBTB32-8DT2 AJ65SBTB32-8DT AJ65SBTB32-16DT2 AJ65SBTB32-16DT AJ65SBTC4-16DT2 AJ65SBTC4-16DT AJ65SBTC1-32DT2 AJ65SBTC1-32DT
Type
DC input transistor output combined model
AJ65SBTC1-32DT3 AJ65SBTC1-32DT1 Leakage current (when output is off) 0.1mA or less 0.25mA or less Protection function None Overload protection function,
overvoltage protection function, overheat protection function
* Low-leakage current type models do not include the same protection function as the old models. Use the old models when protection function is necessary.
3
[Specifications]
(1) AJ65SBTB1-8T1 transistor output module (Sink type) Transistor output module Form
Specification AJ65SBTB1-8T1 Surface shape Number of output points 8 points Insulation method Photocoupler Rated load voltage 12/24VDC Operating load voltage range 10.2 - 26.4VDC (ripple ratio: within 5%) Max. load current 0.5A/point (when all point is ON : 0.3A/point)
2.4A/common Max. inrush current 1.0A 10ms or lower Leakage current at OFF 0.1mA or lower Max. voltage drop at ON 0.3V or lower (TYP) 0.5A
0.6V or lower (MAX) 0.5A Output method Sink type Protection function None
OFF ON 0.5ms or lower Response time ON OFF 1.5ms or lower (resistive load)
Voltage 10.2 - 26.4VDC (ripple ratio: within 5%) External Power supply for output
Current 15mA or lower (when 24VDC and all point is ON) Not including external load current
Surge suppression Zener diode Common wiring method 8 points/common (terminal block single wire type) Number of stations occupied
1 station 32 points assignment (use 8 points)
Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply Current 35mA or lower (when 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 s, noise carrier
frequency 25 - 60Hz (noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.14 (0.31) External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply
terminal), Direct-type 10-point terminal block (I/O power supply area) (M3 screw)
Applicable solderless terminal
• RAV1.25-3 R1.25-3 (in conformance with JIS C 2805) [Applicable wire size: 0.3 -1.25mm2]
• V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.)
• 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]
Accessory User’s Manuals
AJ65
SBT
B1-
8T1
Y01
23
45
67 Y0
Y2Y4
Y6
Y1Y3
Y5Y7
DA
DG
+24V
24G
DB
SLD
(FG
)
CTL
+ CO
M-
12
41
24
1020
408
ON
STA
TIO
N N
O.
B R
ATE
External connection Terminal number Signal name
TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G TB8 Y0 TB9 Y1 TB10 Y2 TB11 Y3 TB12 Y4 TB13 Y5 TB14 Y6 TB15 Y7 TB16 CTL+ TB17 COM-
I/O module power supply
DADBDGSLD+24VFG24G
21
34567
Y0Y1Y2Y3Y4Y5Y6
98
1011121314
Y715CTL+16COM-17
Load power supply
External supplypower for output
L
L
L
L
Y08Y19Y210Y311Y412Y513Y614Y715CTL+16COM-17
Constantvoltage circuit
Insulation
DC/DC
When external supply power for output and load power supply are combined.
4
(2) AJ65SBTB2-8T1 transistor output module (Sink type)
Transistor output module Form Specification AJ65SBTB2-8T1 Surface shape Number of output points 8 points Insulation method Photocoupler Rated load voltage 12/24VDC Operating load voltage range
10.2 - 26.4VDC (ripple ratio: within 5%)
Max. load current 0.5A/point (when all point is ON: 0.3A/point) 2.4A/common
Max. inrush current 1.0A 10ms or lower Leakage current at OFF 0.1mA or lower Max. voltage drop at ON 0.3V or lower (TYP) 0.5A
0.6V or lower (MAX) 0.5A Output method Sink type Protection function None
OFF ON 0.5ms or lower Response time ON OFF 1.5ms or lower (resistive load)
Voltage 10.2 - 26.4VDC (ripple ratio: within 5%) External Power supply for output
Current 17.8mA or lower (when 24VDC and all point is ON) Not including external load current
Surge suppression Zener diode Common wiring method 8 points/common
(terminal block 2-wire type) Number of stations occupied
1 station 32 points assignment (use 8 points)
Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 45mA or lower (when 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 s, noise carrier frequency
25 - 60Hz (noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.18 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply
terminal), Direct-type 18-point terminal block (I/O power supply area) (M3 screw)
Applicable solderless terminal
• RAV1.25-3.5 (in conformance with JIS C 2805) [Applicable wire size: 0.3 -.25mm2]
• V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3 (Japan Terminal Co., Ltd.)
• 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]
Accessory User’s Manual C
OM
CO
MC
OM
CO
MC
OM
CO
MC
OM
CO
MD
C24
GD
C24
VY7
Y6Y5
Y4Y3
Y2Y1
Y0
4020
108
42
14
21
B R
ATE
STAT
ION
NO
.
ON
PWL
RU
NL
ERR
Y01
23
45
67
AJ6
5SB
TB2-
8T1
DA
DG
+24V
24G
DB
SLD
(FG
)
MIT
SU
BIS
HI
External connection Terminal number Signal name
TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G TB8 Y0 TB9 COM TB10 Y1 TB11 COM TB12 Y2 TB13 COM TB14 Y3 TB15 COM TB16 Y4 TB17 COM TB18 Y5 TB19 COM TB20 Y6 TB21 COM TB22 Y7 TB23 COM TB24 DC24V TB25 DC24G
I/O module power supply
DC/DC
DADBDGSLD+24VFG24G
21
34567
Y0COMY1COMY2COMY3
98
1011121314
COMY4COMY5COMY6COM
1615
1718192021
Y7COMDC24VDC24G
22232425
L
External supplypower for output
Insulation
Constantvoltage circuit
5
(3) AJ65SBTB2-16T1 transistor output module (Sink type)
Transistor output module Form Specification AJ65SBTB2-16T1 Surface shape Number of output points 16 points Insulation method Photocoupler Rated load voltage 12/24VDC Operating load voltage range 10.2 - 26.4VDC (ripple ratio: within 5%) Max. load current 0.5A/point (when all point is ON: 0.22A/point) 3.6A/common Max. inrush current 1.0A 10ms or lower Leakage current at OFF 0.1mA or lower Max. voltage drop at ON 0.3V or lower (TYP) 0.5A 0.6V or lower (MAX) 0.5A Output method Sink type Protection function None
OFF ON 0.5ms or lower Response time ON OFF 1.5ms or lower (resistive load)
Voltage 10.2 - 26.4VDC (ripple ratio: within 5%) External Power supply for output
Current 24.2mA or lower (when 24VDC and all point is ON) Not including external load current
Surge suppression Zener diode Common wiring method 16 points/common (terminal block 2-wire type) Occupied station number 1 station 32 points assignment (use 16 points)
Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 55mA or lower (when 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 s, noise carrier frequency 25 -
60Hz (noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.25 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply
terminal), Direct-type 34-point terminal block (I/O power supply area) (M3 screw) Applicable solderless terminal • RAV1.25-3.5 (in conformance with JIS C 2805)
[Applicable wire size: 0.3 -1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),
RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]
Accessory User’s Manual
4020
108
42
14
21
B R
ATE
STA
TIO
N N
O.
ON CO
MC
OM
CO
MC
OM
CO
MC
OM
CO
MD
C24
GD
C24
VY
FY
EY
DY
CY
BY
AY
9C
OM
CO
MC
OM
CO
MC
OM
CO
MC
OM
CO
MC
OM
Y8
Y7
Y6
Y5
Y4
Y3
Y2
Y1
Y0
PW
L R
UN
L ER
RY
01
23
45
67
Y8
9A
BC
DE
F
AJ6
5SBT
B2-
16T1
DA
DG
+24V
24G
DB
SLD
(FG
)
MIT
SUBI
SHI
External connection Terminal number Signal name
TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G TB8 Y0 TB9 COM TB10 Y1 TB11 COM TB12 Y2 TB13 COM TB14 Y3 TB15 COM TB16 Y4 TB17 COM TB18 Y5 TB19 COM TB20 Y6 TB21 COM TB22 Y7 TB23 COM TB24 Y8 TB25 COM TB26 Y9 TB27 COM TB28 YA TB29 COM TB30 YB TB31 COM TB32 YC TB33 COM TB34 YD TB35 COM TB36 YE TB37 COM TB38 YF TB39 COM TB40 DC24V
DC/DC
DADBDGSLD+24VFG24G
21
34567
Y0COMY1COMY2COMY3
1011121314
COMY4COMY5COM
1615
171819
Y620COMY7COMY8COM
2221
232425
Y926COMYACOMYBCOM
2827
293031
YC32COMYDCOMYECOM
3433
353637
YF38COMDC24VDC24G
4039
41
89
L
I/O module power supply
External supplypower for output
Insulation
Constantvoltage circuit
TB41 DC24G
6
(4) AJ65SBTC1-32T1 transistor output module (Sink type)
Transistor output module Form Specification AJ65SBTC1-32T1 Surface shape Number of output points 32 points Insulation method Photocoupler Rated load voltage 12/24VDC Operating load voltage range 10.2 - 26.4VDC (ripple ratio: within 5%) Max. load current 0.1A/point 3.2A/common Max. inrush current 1.0A 10ms or lower Leakage current at OFF 0.1mA or lower Max. voltage drop at ON 0.3V or lower (TYP) 0.1A, 0.6V or lower (MAX) 0.1A Output method Sink type Protection function None
OFF ON 0.5ms or lower Response time ON OFF 1.5ms or lower (resistive load)
Voltage 10.2 - 26.4VDC (ripple ratio: within 5%) External Power supply for output
Current 50mA or lower (when 24VDC and all point is ON) Not including external load current
Surge suppression Zener diode Common wiring method 32 points/common (quick connector plug single wire type) Number of stations occupied 1 station 32 points assignment (use 32 points)
Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 60mA or lower (when 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 s, noise carrier
frequency 25 - 60Hz(noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.16 External wiring system 7-point 2-piece terminal block (transmission circuit, module power
supply terminal), Direct-type 2-point terminal block (I/O power supply area) (M3 screw) Dedicated quick connector (4-pin pressure-displacement type, Connector plug sold separately.)
Transmission circuit, module power supply terminal and I/O power supply area
• RAV1.25-3.5 (in conformance with JIS-C2805) [Applicable wire size: 0.3 - 1.25mm2]
• V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]
Applicable wire size
I/O area connector
• φ1.0 - 1.4 (A6CON-P214), φ1.4 - 2.0 (A6CON-P220) [Applicable wire size: 0.14 - 0.2mm2]
• φ1.0 - 1.4 (A6CON-P514), φ1.4 - 2.0 (A6CON-P520) [Applicable wire size: 0.3 - 0.5mm2]
Accessory User's Manual
AJ65SBTC1-32T1
12
41
24
1020
408
ON
STATION NO.
B RATE
Y01
23
45
67
Y8Y0-YF
Y10-Y1F
9A
BC
DE
F
Y1011
1213
1415
1617
Y1819
1A1B
1C1D
1E1F
DADG
+24V
24G
DBSLD
(FG)
CTL
COM|
Y1D
Y1E
Y1F
Y1C
Y19
Y1A
Y1B
Y18
Y15
Y16
Y17
Y14
Y11
Y12
Y13
Y10
YD YE YFYCY9 YA YBY8
Y5 Y6 Y7Y4Y1 Y2 Y3Y0
External connection Terminal number Signal name Pin number Signal name
TB1 DA CON1-1 Y0 TB2 DB CON1-2 Y1 TB3 DG CON1-3 Y2 TB4 SLD CON1-4 Y3 TB5 +24V CON2-1 Y4 TB6 FG CON2-2 Y5 TB7 24G CON2-3 Y6 TB8 CTL+ CON2-4 Y7 TB9 COM- CON3-1 Y8
Pin arrangement CON3-2 Y9 CON3-3 YA CON3-4 YB CON4-1 YC CON4-2 YD CON4-3 YE CON4-4 YF CON5-1 Y10 CON5-2 Y11 CON5-3 Y12 CON5-4 Y13 CON6-1 Y14 CON6-2 Y15 CON6-3 Y16 CON6-4 Y17 CON7-1 Y18 CON7-2 Y19 CON7-3 Y1A CON7-4 Y1B CON8-1 Y1C CON8-2 Y1D CON8-3 Y1E
DADBDGSLD
DC/DC+24VFG24G
CTL+COM-
L
L
L
L
CTL+COM-
L
CON11
2
3
4
CON81
2
3
4
89
89
21
34567I/O module
power supply
Load power supply
External supplypower for output
Constantvoltagecircuit
Insulation
When external supply power for output and load power supply are combined.
1
CON2
CON1
CON3
CON4
CON5
CON6
CON7
CON8
234
Top view
CON8-4 Y1F
7
(5) AJ65SBTB1-16DT3 combined module
DC input transistor output combined module Form Specification AJ65SBTB1-16DT3 Surface shape
Input specification Output specification Number of input points 8 points Number of output points 8 points Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 5mA Operating load voltage
range 19.2 - 26.4VDC
(ripple ratio: within 5%) Operating voltage range
19.2 - 26.4VDC (ripple ratio: within 5%)
Max. load current 0.5A/point 2.4A/common
Max. simultaneous input points
100% Max. inrush current 1.0A 10ms or lower
ON voltage/ON current 15V or higher/3.0mA or higher Leakage current at OFF 0.25mA or lower OFF voltage/OFF current
3V or lower/0.5mA or lower Max. voltage drop at ON 0.3V or lower (TYP)0.5A 0.6V or lower (MAX)0.5A
Output form Sink type Input resistance Approx. 4.7k Protection function None
OFF ON 0.2ms or lower (when 24VDC) OFF ON 0.5ms or lower Response time ON OFF 0.2ms or lower (when 24VDC)
Sink type ON OFF 1.5ms or lower (resistive load)
Voltage 19.2 - 26.4VDC (ripple ratio: within 5%)
External Power supply for output
Current 17.8mA or lower (When 24VDC and all point is ON) Not including external load current
Input form Sink type Surge suppression Zener diode Common wiring method
16 points/common (Terminal block single wire type)
Number of stations occupied
1 station 32 points assignment (use 16 points)
Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply
Current 55mA or lower (When 24VDC and all point is ON)
Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator condition)
Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester between all DC external
terminals and ground Level of protection IP20 Weight (kg) 0.18 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),
Direct-type 18-point terminal block (I/O power supply area) (M3 screw) Applicable solderless terminal
• RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 - 1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),
RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - o 2mm2]
Accessory User's Manual X7
X5X3
X1Y9
9BYD
YFYE
YCYA
Y8X6
X4X2
X0
4020
108
42
14
21
B R
ATE
STAT
ION
NO
.
ON
AJ6
5SBT
B1-1
6DT3
DA
DG
+24V
24G
DB
SLD
(FG
)
MIT
SUBI
SHI
PWL
RUN
L ER
RX0
12
34
56
7Y8
9A
BC
DE
F
CO
M+ CO
M-
External connection Terminal number
Signal name
Pin number
Signal name
TB1 DA TB8 X0 TB2 DB TB9 X1 TB3 DG TB10 X2 TB4 SLD TB11 X3 TB5 +24V TB12 X4 TB6 FG TB13 X5 TB7 24G TB14 X6
TB15 X7 TB16 Y8 TB17 Y9 TB18 YA TB19 YB TB20 YC TB21 YD TB22 YE TB23 YF TB24 COM+ TB25 COM-
DC/DC
DADBDGSLD+24VFG24G
21
34567
X0X1X2X3X4X5X6
98
1011121314
X7Y8Y9YAYBYCYD
1615
1718192021
YEYF
2223
L
R
R
COM+COM-
2425
COM+2425 COM-
L
I/O module power supply
Load power supply
External supplypower for output
Constantvoltage circuit
Insulation
When external power supply for output and load power supply are combined.
8
(6) AJ65SBTB1-32DT3 combined module
DC input transistor output combined module Form Specification AJ65SBTB1-32DT3 Surface shape
Input specification Output specification Number of input points 16 points Number of output
points 16 points
Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 5mA Operating load
voltage range 19.2 - 26.4VDC
(ripple ratio: within 5%) Operating voltage range
19.2 - 26.4VDC (ripple ratio: within 5%)
Max. load current 0.5A/point 3.6A/common
Max. simultaneous input points
100% Max. inrush current 1.0A 10ms or lower
ON voltage/ON current 15V or higher/3.0mA or higher Leakage current at OFF
0.1mA or lower
OFF voltage/OFF current
3V or lower/0.5mA or lower Max. voltage drop at ON
0.3V or lower (TYP)0.5A 0.6V or lower (MAX)0.5A
Output form Sink type Input resistance Approx. 4.7k Protection function None
OFF ON 0.2ms or lower (when 24VDC) OFF ON 0.5ms or lower Response time ON OFF 0.2ms or lower (when 24VDC)
Sink type ON OFF 1.5ms or lower (resistive load)
Voltage 19.2 - 26.4VDC (ripple ratio: within 5%)
External Power supply for output
Current 24.2mA or lower (When 24VDC and all point is ON) Not including external load current
Input form Negative common (Sink type) Surge suppression Zener diode Common wiring method 32 points/common (Terminal block single wire type) Number of stations occupied
1 station 32 points assignment (use 32 points)
Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply Current 60mA or lower (When 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator
condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester between all DC external
terminals and ground Level of protection IP20 Weight (kg) 0.25 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),
Direct-type 34-point terminal block (I/O power supply area) (M3 screw) Applicable solderless terminal
• RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 -1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),
RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]
Accessory User's Manual 40
2010
84
21
42
1B
RA
TEST
ATI
ON
NO
.
ON Y1
9Y1
7Y1
5Y1
3YB
YDYF
CO
M-
CO
M+
YEYC
YAY1
8Y1
6Y1
4Y1
2X7
X5X3
X1X9
XBXD
XFY1
1Y1
0XE
XCXA
X8X6
X4X2
X0
PWL
RU
NL
ER
RX0
12
34
56
7X8
9A
BC
DE
F
AJ6
5SB
TB1-
32D
T3D
AD
G+2
4V24
GD
BSL
D(F
G)
MIT
SUBI
SHI
Y101
112
1314
1516
17Y1
819
1A1B
1C1D
1E1F
External connection Terminal number
Signal name
Terminal number
Signal name
TB1 DA TB21 XD TB2 DB TB22 XE TB3 DG TB23 XF TB4 SLD TB24 Y10 TB5 +24V TB25 Y11 TB6 FG TB26 Y12 TB7 24G TB27 Y13
Terminal number
Signal name
TB28 Y14
TB8 X0 TB29 Y15 TB9 X1 TB30 Y16 TB10 X2 TB31 Y17 TB11 X3 TB32 Y18 TB12 X4 TB33 Y19 TB13 X5 TB34 Y1A TB14 X6 TB35 Y1B TB15 X7 TB36 Y1C TB16 X8 TB37 Y1D TB17 X9 TB38 Y1E TB18 XA TB39 Y1F TB19 XB TB40 COM+ TB20 XC TB41 COM-
DC/DC
DADBDGSLD+24VFG24G
21
34567
X0X1X2X3X4X5X6
1011121314
X7X8X9XAXB
1615
171819
XC20XDXEXFY10Y11
2221
232425
Y1226Y13Y14Y15Y16Y17
2827
293031
Y1832Y19Y1AY1BY1CY1D
3433
353637
Y1E38Y1FCOM+COM-
4039
41
89
L
R
R
COM+4041 COM-
L
I/O module power supply
Load power supply
External supplypower for output
Constantvoltage circuit
Insulation
When external power supplyfor output and load power supply are combined.
9
(7) AJ65SBTB32-8DT2 combined module
DC input transistor output combined module Form Specification AJ65SBTB32-8DT2 Surface shape
Input specification Output specification Number of input points 4 points Number of output
points 4 points
Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 7mA Operating load voltage
range 19.2 - 26.4VDC
(ripple ratio: within 5%) Operating voltage range 19.2 - 26.4VDC
(ripple ratio: within 5%) Max. load current 0.5A/point
1.2A/common Max. simultaneous input points
100% Max. inrush current 1.0A 10ms or lower
ON voltage/ON current 14V or higher/3.5mA or higher Leakage current at OFF
0.25mA or lower
OFF voltage/OFF current 6V or lower/1.7mA or lower Max. voltage drop at ON
0.3V or lower (TYP)0.5A 0.6V or lower (MAX)0.5A
Output form Sink type. Input resistance Approx. 3.3k Protection function None
OFF ON 1.5ms or lower (when 24VDC) OFF ON 0.5ms or lower Response time ON OFF 1.5ms or lower (when 24VDC)
Response time ON OFF 1.5ms or lower (resistive load)
Voltage 19.2 - 26.4VDC (ripple ratio: within 5%)
External Power supply for output
Current 14.6mA or lower (When 24VDC and all point is ON) Not including external load current
Input form Negative common (Sink type) Surge suppression Zener diode Common wiring method 8 points/common (3-wire type terminal block: input, 2-wire type terminal block: output) Number of stations occupied
1 station 32 points assignment (use 8 points)
Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply Current 45mA or lower (When 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise
simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.18 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),
Direct-type 18-point terminal block (I/O power supply area) (M3 screw) Applicable solderless terminal
• RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 to1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),
RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]
Accessory User's Manual
CO
M-
CO
M+
CO
M-
CO
M+
CO
M+
CO
M+
CO
M+
CO
M+
DC
24G
DC
24V
YBYA
Y9Y8
X3X2
X1X0
4020
108
42
14
21
B R
ATE
STAT
ION
NO
.
ON
PWL
RU
NL
ERR
X01
23
Y89
AB
AJ6
5SBT
B32-
8DT2
DA
DG
+24V
24G
DB
SLD
(FG
)
MIT
SUBI
SHI
External connection Terminal number
Signal name
Terminal number
Signal name
TB1 DA TB8 X0 TB2 DB TB9 COM+ TB3 DG TB10 X1 TB4 SLD TB11 COM- TB5 +24V TB12 X2 TB6 FG TB13 COM+ TB7 24G TB14 X3
TB15 COM- TB16 Y8 TB17 COM+ TB18 Y9 TB19 COM+ TB20 YA TB21 COM+ TB22 YB TB23 COM+ TB24 DC24V
DC/DC
DADBDGSLD+24VFG24G
21
34567
X0COM+X1COM-X2COM+X3
98
1011121314
COM-Y8COM+Y9COM+YACOM+
1615
1718192021
YBCOM+DC24VDC24G
22232425
L
R
R
I/O module power supply
External supplypower for output
Constantvoltage circuit
Insulation
3-wire typesensor
TB25 DC24G
10
(8) AJ65SBTB32-16DT2 combined module
DC input transistor output combined module Form Specification AJ65SBTB32-16DT2 Surface shape
Input specification Output specification Number of input points 8 points Number of output
points 8 points
Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 7mA Operating load voltage
range 19.2 - 26.4VDC
(ripple ratio: within 5%) Operating voltage range
19.2 - 26.4VDC (ripple ratio: within 5%)
Max. load current 0.5A/point 2.4A/common
Max. simultaneous input points
100% Max. inrush current 1.0A 10ms or lower
ON voltage/ON current 14V or higher/3.5mA or higher Leakage current at OFF
0.1mA or lower
OFF voltage/OFF current
6V or lower/1.7mA or lower Max. voltage drop at ON
0.3V or lower (TYP)0.5A 0.6V or lower (MAX)0.5A
Output form Sink type Input resistance Approx. 3.3k Protection function None
OFF ON 1.5ms or lower (when 24VDC) OFF ON 0.5ms or lower Response time ON OFF 1.5ms or lower (when 24VDC)
Response time ON OFF 1.5ms or lower (resistive load)
Voltage 19.2 - 26.4VDC (ripple ratio: within 5%)
External Power supply for output
Current 17.8mA or lower (When 24VDC and all point is ON) Not including external load current
Input form Negative common (Sink type) Surge suppression Zener diode Common wiring method
16 points/common (3-wire type terminal block: input, 2-wire type terminal block: output)
Number of stations occupied
1 station 32 points assignment (use 16 points)
Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply Current 50mA or lower (When 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator
condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester between all DC external
terminals and ground Level of protection IP20 Weight (kg) 0.25 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),
Direct-type 34-point terminal block (I/O power supply area) (M3 screw) Applicable solderless terminal
• RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 - 1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]
Accessory User's Manual
4020
108
42
14
21
B R
ATE
STA
TIO
N N
O.
ON
CO
M+
CO
M+
CO
M+
CO
M+
CO
M+
CO
M+
CO
M+
DC
24G
DC
24V
YFYE
YDYC
YBYA
Y9C
OM
-C
OM
+C
OM
-C
OM
+C
OM
+C
OM
-C
OM
+C
OM
-C
OM
+Y8
X7X6
X5X4
X3X2
X1X0
PWL
RU
NL
ER
RX0
12
34
56
7Y8
9A
BC
DE
F
AJ6
5SB
TB32
-16D
T2D
AD
G+2
4V24
GD
BSL
D(F
G)
MIT
SUBI
SHI
External connection Terminal number
Signal name
Terminal number
Signal name
TB1 DA TB21 COM+ TB2 DB TB22 X7 TB3 DG TB23 COM- TB4 SLD TB24 Y8 TB5 +24V TB25 COM+ TB6 FG TB26 Y9 TB7 24G TB27 COM+
Terminal number
Signal name
TB28 YA
TB8 X0 TB29 COM+ TB9 COM+ TB30 YB TB10 X1 TB31 COM+ TB11 COM- TB32 YC TB12 X2 TB33 COM+ TB13 COM+ TB34 YD TB14 X3 TB35 COM+ TB15 COM- TB36 YE TB16 X4 TB37 COM+ TB17 COM+ TB38 YF TB18 X5 TB39 COM+ TB19 COM- TB40 DC24V TB20 X6 TB41 DC24G
DC/DC
DADBDGSLD+24VFG24G
21
34567
X0COM+X1COM-X2COM+X3
1011121314
COM-X4COM+X5COM-
1615
171819
X620COM+X7COM-Y8COM+
2221
232425
Y926COM+YACOM+YBCOM+
2827
293031
YC32COM+YDCOM+YECOM+
3433
353637
YF38COM+DC24VDC24G
4039
41
89
R
R
L
I/O module power supply
External supplypower for output
Constantvoltage circuit
Insulation
3-wire typesensor
11
(9) AJ65SBTC4-16DT2 combined module
DC input transistor output combined module Form Specification AJ65SBTC4-16DT2 Surface shape
Input specification Output specification Number of input points 8 points Number of output points 8 points Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 5mA Operating load voltage
range 19.2 - 26.4VDC
(ripple ratio: within 5%) Operating voltage range 19.2 - 26.4VDC
(ripple ratio: within 5%) Max. load current 0.5A/point
(when all point is ON : 0.3 A/point) 2.4A/common
Max. simultaneous input points
100% Max. inrush current 1.0A 10ms or lower
ON voltage/ON current 14V or higher/ 3.5mA or higher
Leakage current at OFF 0.1mA or lower
OFF voltage/OFF current 6V or lower/1.7mA or lower Input resistance Approx. 4.7k
Max. voltage drop at ON 0.3V or lower (TYP)0.5A 0.6V or lower (MAX)0.5A
Output method Sink type OFF ON 1.5ms or lower (when 24VDC) Protection function None
Response time
ON OFF 1.5ms or lower (when 24VDC)
OFF ON 0.5ms or lower
Input form Negative common (Sink type)
Response time
ON OFF 1.5ms or lower (resistive load)
Voltage 19.2 - 26.4VDC (ripple ratio: within 5%)
External Power supply for output Current 13mA or lower
(when 24VDC and all point is ON) Not including external load current
Surge suppression Zener diode Common method 16 points/common (quick connector plug 4 wire type) Number of stations occupied
1 station 32 points assignment (use 16 points)
Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 40mA or lower (when TYP. 24VDC) Noise durability DC type noise voltage 500 Vp-p,
noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester between all DC external
terminals and ground Level of protection IP20 Weight (kg) 0.15 External connection method
7-point 2-piece terminal block (transmission circuit, module power supply terminal), Direct-type 2-point terminal block (I/O power supply area) (M3 screw), Dedicated quick connector (4-pin pressure-displacement type, connector plug sold separately.)
Transmission circuit, module power supply terminal and I/O power supply area
• RAV1.25-3.5 (in conformance with JIS C 2805) [Applicable wire size: 0.3 - 1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),
RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.)
[Applicable wire size: 1.25 - 2mm2]
Applicable wire size
I/O area connector
• φ1.0 - 1.4 (A6CON-P214), φ1.4 - 2.0 (A6CON-P220) [Applicable wire size : 0.14 - 0.2mm2]
• φ1.0 - 1.4 (A6CON-P514), φ1.4 - 2.0 (A6CON-P520) [Applicable wire size : 0.3 - 0.5mm2]
Accessory User's Manual
AJ65
SBTC
4-16
DT2
12
41
24
10
YF +24V
24G
X7
2040
8
ON
STA
TIO
N N
O.
B R
ATE
X01
23
45
67
Y89
AB
CD
EF
DA
DG
+24V
24G
DB
SLD
(FG
)
CTL
+ CO
M-
YE +24V
24G
X6YD +2
4V24
G
X5YC +2
4V24
G
X4YB +2
4V24
G
X3YA +2
4V24
G
X2Y9 +24V
24G
X1Y8 +24V
24G
X0
12
External connection
Pin arrangement Terminal number
Signal name
Terminal number
Signal name
TB1 DA CON4-1 X3 TB2 DB CON4-2 YB TB3 DG CON4-3 +24V TB4 SLD CON4-4 24G TB5 +24V CON5-1 X4 TB6 FG CON5-2 YC TB7 24G CON5-3 +24V
Terminal number
Signal name
CON5-4 24G
CON1-1 X0 CON6-1 X5 CON1-2 Y8 CON6-2 YD CON1-3 +24V CON6-3 +24V CON1-4 24G CON6-4 24G CON2-1 X1 CON7-1 X6 CON2-2 Y9 CON7-2 YE CON2-3 +24V CON7-3 +24V CON2-4 24G CON7-4 24G CON3-1 X2 CON8-1 X7 CON3-2 YA CON8-2 YF CON3-3 +24V CON8-3 +24V CON3-4 24G CON8-4 24G
Terminal number
Signal name
TB8 CTL+ TB9 COM-
1
CON2
CON1
CON3
CON4
CON5
CON6
CON7
CON8
234
Top view
<Connection example for 4-wire, 3-wire, 2-wire sensor>
DC/DC
DADBDGSLD+24VFG24G
21
34567
CON1Black (white)
Orange (Orange)
Red (Red)
Bule (Black)
RR
4-wire type sensor(sink output sink input)
CON21
2
3
4
RR
CON81
2
3
4
RR
CTL+COM-
89
1
2
3
4
I/O module power supply
Constantvoltagecircuit
Insulation
Det
ectio
nci
rcui
t
3-wire sensor (sink output)
Det
ectio
nci
rcui
t
2-wire sensor (sink output)
Det
ectio
nci
rcui
t
<Another connection example>
DC/DC
DADBDGSLD+24VFG24G
21
34567
CON1
CON8
1
2
3
4
RR
RR
CTL+COM-
89
L
1
2
3
4
I/O module power supply
Insulation
(Sink output)
(Sink output)
Constantvoltagecircuit
13
(10) AJ65SBTC1-32DT2 combined module
DC input transistor output combined module Form Specification AJ65SBTC1-32DT2 Surface shape
Input specification Output specification Number of input points 16 points Number of output points 16 points Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 5mA Operating load voltage
range 19.2 - 26.4VDC
(ripple ratio: within 5%) Operating voltage range 19.2 - 26.4VDC
(ripple ratio: within 5%) Max. load current 0.1A/point 1.6A/common
Max. simultaneous ON input points
100% Max. inrush current 1.0A 10ms or lower
ON voltage/ON current 14V or higher/3.5mA or higher Leakage current at OFF 0.1mA or lower OFF voltage/OFF current 6V or lower/1.7mA or lower Input resistance Approx. 4.7k
Max. voltage drop at ON
0.3VDC or lower (TYP) 0.1A 0.6VDC or lower (MAX) 0.1A
Output method Sink type OFF ON 1.5ms or lower (when 24VDC) Protection function None
Response time
ON OFF 1.5ms or lower (when 24VDC)
OFF ON 0.5ms or lower
Input form Negative common (Sink type)
Response time
ON OFF 1.5ms or lower (resistive load) Voltage 19.2 - 26.4VDC
(ripple ratio: within 5%)
External Power supply for output
Current 17mA or lower (when 24VDC and all point is ON) Not including external load current
Surge suppression Zener diode Common method 32 points/common (quick connector plug single wire type) Number of stations occupied
1 station 32 points assignment (use 32 points)
Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 50mA or lower (when TYP. 24VDC) Noise durability DC type noise voltage 500 Vp-p,
noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.16 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),
Direct-type 2-point terminal block (I/O power supply area) (M3 screw), Dedicated quick connector (4-pin pressure-displacement type, Connector plug sold separately.)
Transmission circuit, module power supply terminal and I/O power supply area
• RAV1.25 –3.5 (in conformance with JIS C 2805) [Applicable wire size: 0.3 - 1.25mm2]
• V2 - MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.)
• 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]
Applicable wire size
I/O area connector
• φ1.0 - 1.4 (A6CON-P214), φ1.4 - 2.0 (A6CON-P220) [Applicable wire size: 0.14 - 0.2mm2]
• φ1.0 - 1.4 (A6CON-P514), φ1.4 - 2.0 (A6CON-P520) [Applicable wire size: 0.3 - 0.5mm2]
Accessory User’s Manual
AJ65
SBTC
1-32
DT2
12
41
24
1020
408
ON
STAT
ION
NO
.B
RA
TEX0
12
34
56
7X8
X0-X
F
Y10-
Y1F
9A
BC
DE
F
Y10
1112
1314
1516
17Y1
819
1A1B
1C1D
1E1F
DA
DG
+24V
24G
DB
SLD
(FG
)
CO
M+ C
OM
-
Y1D
Y1E
Y1F
Y1C
Y19
Y1A
Y1B
Y18
Y15
Y16
Y17
Y14
Y11
Y12
Y13
Y10
XD XE XFXCX9 XA XBX8
X5 X6 X7X4X1 X2 X3X0
14
External connection
Pin arrangement Terminal number Signal name TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G
Pin number Signal name CON1-1 X0 CON1-2 X1 CON1-3 X2 CON1-4 X3 CON2-1 X4 CON2-2 X5 CON2-3 X6 CON2-4 X7 CON3-1 X8 CON3-2 X9 CON3-3 XA CON3-4 XB CON4-1 XC CON4-2 XD CON4-3 XE CON4-4 XF CON5-1 Y10 CON5-2 Y11 CON5-3 Y12 CON5-4 Y13 CON6-1 Y14 CON6-2 Y15 CON6-3 Y16 CON6-4 Y17 CON7-1 Y18 CON7-2 Y19 CON7-3 Y1A CON7-4 Y1B CON8-1 Y1C CON8-2 Y1D CON8-3 Y1E CON8-4 Y1F
Terminal number Signal name TB8 COM+
DADBDGSLD
DC/DC+24VFG24G
8 COM+9 COM-
L
L
8 COM+9 COM-
L
R
R
R
CON1 to CON4
R
1
2
3
4
CON5 to CON81
2
3
4
21
34567I/O module
power supply
Load power supply
External supplypower for output
Constantvoltagecircuit
Insulation
When external power supply for output and load power supply are combined.
1
CON2
CON1
CON3
CON4
CON5
CON6
CON7
CON8
234
Top view
TB9 COM-
15
(11) AJ65SBTC1-32DT3 combined module
DC input transistor output combined module Form Specification AJ65SBTC1-32DT3 Surface shape
Input specification Output specification Number of input points 16 points Number of output points 16 points Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 5mA Operating load voltage
range 19.2 - 26.4VDC
(ripple ratio: within 5%) Operating voltage range 19.2 - 26.4VDC
(ripple ratio: within 5%) Max. load current 0.1A/point 1.6A/common
Max. simultaneous ON input points
100% Max. inrush current 1.0A 10ms or lower
ON voltage/ON current 15V or higher/3mA or higher Leakage current at OFF 0.1mA or lower OFF voltage/OFF current 3V or lower/0.5mA or lower Input resistance Approx. 4.7 k
Max. voltage drop at ON 0.3VDC or lower(TYP)0.1A 0.6VDC or lower(MAX)0.1A
Output method Sink type OFF ON 0.2ms or lower (when 24VDC) Protection function None
Response time
ON OFF 0.2ms or lower (when 24VDC)
OFF ON 0.5ms or lower
Input form Negative common (Sink type)
Response time
ON OFF 1.5ms or lower (resistive load) Voltage 19.2 - 26.4VDC
(ripple ratio: within 5%)
External Power supply for output Current 17mA or lower
(when 24VDC and all point is ON) Not including external load current
Surge suppression Zener diode Common method 32 points/common (quick connector plug single wire type) Number of stations occupied
1 station 32 points assignment (use 32 points)
Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 50mA or lower (when TYP. 24VDC) Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise
simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.16 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),
Direct-type 2-point terminal block (I/O power supply area) (M3 screw) Dedicated quick connector (4-pin pressure-displacement type, Connector plug sold separately.)
Transmission circuit, module power supply terminal and I/O power supply area
• RAV1.25 –3.5 (in conformance with JIS C 2805) [Applicable wire size: 0.3 - 1.25mm2]
• V2 - MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.)
• 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]
Applicable wire size
I/O area connector
• φ1.0 - 1.4 (A6CON-P214), φ1.4 - 2.0 (A6CON-P220) [Applicable wire size: 0.14 - 0.2mm2]
• φ1.0 - 1.4 (A6CON-P514), φ1.4 - 2.0 (A6CON-P520) [Applicable wire size: 0.3 - 0.5mm2]
Accessory User’s Manual
AJ65
SBTC
1-32
DT3
12
41
24
1020
408
ON
STAT
ION
NO
.B
RA
TEX0
12
34
56
7X8
X0-X
F
Y10-
Y1F
9A
BC
DE
F
Y10
1112
1314
1516
17Y1
819
1A1B
1C1D
1E1F
DA
DG
+24V
24G
DB
SLD
(FG
)
CO
M+ C
OM
-
Y1D
Y1E
Y1F
Y1C
Y19
Y1A
Y1B
Y18
Y15
Y16
Y17
Y14
Y11
Y12
Y13
Y10
XD XE XFXCX9 XA XBX8
X5 X6 X7X4X1 X2 X3X0
16
External connection
Pin arrangement Terminal number Signal name TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G
Pin number Signal name CON1-1 X0 CON1-2 X1 CON1-3 X2 CON1-4 X3 CON2-1 X4 CON2-2 X5 CON2-3 X6 CON2-4 X7 CON3-1 X8 CON3-2 X9 CON3-3 XA CON3-4 XB CON4-1 XC CON4-2 XD CON4-3 XE CON4-4 XF CON5-1 Y10 CON5-2 Y11 CON5-3 Y12 CON5-4 Y13 CON6-1 Y14 CON6-2 Y15 CON6-3 Y16 CON6-4 Y17 CON7-1 Y18 CON7-2 Y19 CON7-3 Y1A CON7-4 Y1B CON8-1 Y1C CON8-2 Y1D CON8-3 Y1E CON8-4 Y1F
Terminal number Signal name TB8 COM+
DADBDGSLD
DC/DC+24VFG24G
8 COM+9 COM-
L
L
8 COM+9 COM-
L
R
R
R
R
1
2
3
4
1
2
3
4
21
34567
CON1 to CON4
CON5 to CON8
I/O module power supply
Load power supply
External supplypower for output
Constantvoltagecircuit
Insulation
When external power supply for output and load power supply are combined.
1
CON2
CON1
CON3
CON4
CON5
CON6
CON7
CON8
234
Top view
TB9 COM-
17
[External Dimensions]
(1) AJ65SBTB1-8T1 (2) AJ65SBTB2-8T1, AJ65SBTB32-8DT2, AJ65SBTB1-16DT3
4(0
.16)
AJ65SBTB1-8T1
Y0 1 2 3 4 5 6 7
Y0 Y2 Y4 Y6
Y1 Y3 Y5 Y7
DA DG +24V 24G
DB SLD (FG)
CTL+
COM
124124102040 8
ON
STATION NO. B RATE
87.3 (3.44)
16.5
(0.6
5)
50 (1
.97)
78.3 (3.1 )(Mounting pitch)+1 0
2-4.5 5.1 Mounting hole (M4 mounting screw)
+0.04 0
40 20 10 8 4 2 1 4 2 1B RATESTATION NO.MITSUBISHI PW L RUN L ERR Y0 1 2 3 4 5 6 7
COM
AJ65SBTB2-8T1
DB
DA
SLD
DG +24V 24G
(FG) COMCOMCOM COM COM COM COM DC24GDC24VY7Y6Y5Y4Y3Y2Y1Y0
ON
118 (4.65)
109 (4.29 )(Mounting pitch)+10
4(0
.16)
16.5
(0.6
5)
50 (1
.97)
2-4.5 5.1 Mounting hole (M4 mounting screw)
+0.040
(3) AJ65SBTB2-16T1, AJ65SBTB32-16DT2, AJ65SBTB1-32DT3
4(0
.16)
179 (7.05)
MITSUBISHIAJ65SBTB2-16T1 40 20 10 8 4 2 1 4 2 1
B RATESTATION NO.
ON
DB
DA
SLD
DG +24V 24G
(FG) COMCOMCOMCOM COM COM COM DC24GDC24VYFYEYDYCYBYAY9
COMCOMCOMCOM COM COM COM COM COMY8Y7Y6Y5Y4Y3Y2Y1Y0
PW L RUN L ERR Y0 1 2 3 4 5 6 7 8 9 A B C D E F
89 (3.46)
170 (4.99 )(Mounting pitch)+10
16.5
(0.6
5)
50 (1
.97)
2-4.5 5.1 Mounting hole (M4 mounting screw)
+0.040
(4) AJ65SBTC1-32T1, AJ65SBTC4-16DT2, AJ65SBTC1-32DT2, AJ65SBTC1-32DT3
4(0
.16)
11(0
.43)
20(0.79)
7.5
(0.3
0)
7.9(0.31)DIN rail
DB
DA
SLD
DG +24V 24G
(FG)
CTL+
COM
PW L RUN L ERR Y0 1 2 3 4 5 6 7 Y8 9 A B C D E F40 20 10 8 4 2 1 4 2 1
B RATESTATION NO.
MITSUBISHI AJ65SBTC1-32T1
ONY1011 12 13 14 15 16 17 Y1819 1A 1B 1C1D1E 1F
Y0-YF
Y10-Y1FY0Y1Y2Y3
Y4Y5Y6Y7
Y8Y9YAYB
YCYDYEYF
Y10Y11Y12Y13
Y14Y15Y16Y17
Y18Y19Y1AY1B
Y1CY1DY1EY1F
40(1.57)
16.5
(0.6
5)
50 (1
.97)
2-4.5 5.1 Mounting hole (M4 mounting screw)
118 (4.65)
109 (4.29 )(Mounting pitch)+10
+0.040
About 110
Unit:mm(inch)
18
[Manual]
Model name Manual supply status IB/SH number Model code AJ65SBTB1-32DT3 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800209-A -
AJ65SBTB1-16DT3 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800210-A -
AJ65SBTB32-16DT2 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800211-A -
AJ65SBTB32-8DT2 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800212-A -
AJ65SBTB2-16T1 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800213-A -
AJ65SBTB2-8T1 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800214-A -
AJ65SBTB1-8T1 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800215-A -
AJ65SBTC1-32DT2 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800216-A -
AJ65SBTC1-32DT3 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800217-A -
AJ65SBTC1-32T1 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800218-A -
AJ65SBTC4-16DT2 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800219-A -
CC-Link System Compact Type Remote I/O Module User’s Manual Sold separately SH-4007-K 13JL72
02 (MEE) Specifications subject to change without notice.
Printed in Japan on recycled paper.
Country/Region Sales office Tel/Fax U.S.A Mitsubishi Electric Automation Inc.
500 Corporate Woods Parkway Vernon Hills, IL 60061 Tel : +1-847-478-2100 Fax : +1-847-478-0328
Brazil MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda. Av. Rio Branco, 123-15 ,and S/1507, Rio de Janeiro, RJ CEP 20040-005, Brazil
Tel : +55-21-221-8343 Fax : +55-21-221-9388
Germany Mitsubishi Electric Europe B.V. German Branch Gothaer Strasse 8 D-40880 Ratingen, GERMANY
Tel : +49-2102-486-0 Fax : +49-2102-486-717
U.K Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Herts., AL10 8XB,UK
Tel : +44-1707-276100 Fax : +44-1707-278695
Italy Mitsubishi Electric Europe B.V. Italian Branch Centro Dir. Colleoni, Pal. Perseo - Ingr.2 Via Paracelso 12, 20041 Agrate B., Milano, Italy
Tel : +39-039-60531 Fax : +39-039-6053312
Spain Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi 76-80 08190 - Sant Cugat del Valles, Barcelona, Spain
Tel : +34-935-653135 Fax : +34-935-891579
South Africa Circuit Breaker Industries LTD. Private Bag 2016, Isando 1600, Johannesburg, South Africa
Tel : +27-11-928-2000 Fax : +27-11-392-2354
Hong Kong Ryoden Automation Ltd. 10th Floor, Manulife Tower, 169 Electric Road, North Point, HongKong
Tel : +852-2887-8870 Fax : +852-2887-7984
China Ryoden International Shanghai Ltd. 3F Block5 Building Automation Instrumentation Plaza 103 Cao Bao Rd. Shanghai 200233 China
Tel : +86-21-6475-3228 Fax : +86-21-6484-6996
Taiwan Setsuyo Enterprise Co., Ltd. 6F., No.105 Wu-Kung 3rd.RD, Wu-Ku Hsiang, Taipei Hsine, Taiwan
Tel : +886-2-2299-2499 Fax : +886-2-2299-2509
Korea HAN NEUNG TECHNO CO.,LTD. 1F Dong Seo Game Channel Bldg., 660-11,Deungchon-dong Kangsec-ku, Seoul, Korea
Tel : +82-2-3668-6567 Fax : +82-2-3664-8335
Singapore Mitsubishi Electric Asia Pte, Ltd. 307 ALEXANDRA ROAD #05-01/02, MITSUBISHI ELECTRIC BUILDING SINGAPORE 159943
Tel : +65-473-2480 Fax : +65-476-7439
Thailand F. A. Tech Co.,Ltd. 898/28,29,30 S.V.CITY BUILDING,OFFICE TOWER 2,FLOOR 17-18 RAMA 3 ROAD,BANGKPONGPANG,YANNAWA,BANGKOK 10120
Tel : +66-2-682-6522 Fax : +66-2-682-6020
Indonesia P.T. Autoteknindo SUMBER MAKMUR JL. MUARA KARANG SELATAN BLOK A UTARA NO.1 KAV. NO.11 KAWASAN INDUSTRI/ PERGUDANGAN JAKARTA - UTARA 14440
Tel : +62-21-663-0833 Fax : +62-21-663-0832
India Messung Systems Put,Ltd. Electronic Sadan NO:111 Unit No15, M.I.D.C BHOSARI,PUNE-411026
Tel : +91-20-7128927 Fax : +91-20-7128108
Australia Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, PostalBag, No 2, Rydalmere, N.S.W 2116, Australia
Tel : +61-2-9684-7777 Fax : +61-2-9684-7245
HEAD OFFICE : 1-8-12, OFFICE TOWER Z 14F HARUMI CHUO-KU 104-6212, JAPANNAGOYA WORKS : 1-14, YADA-MINAMI5, HIGASHI-KU, NAGOYA, JAPAN