Post on 01-Feb-2018
ProcessesMIG (GMAW)Flux-cored (FCAW)
Light Industrial ApplicationsLight fabricationMaintenance and repairAuto bodyFarm/home
Issued Aug. 2016 • Index No. DC/12.58
Weld Thickness120 V: 24 ga.–3/16 in. steel 18 ga.–1/8 in. aluminum240 V: 24 ga.–3/8 in. steel 18 ga.–3/8 in. aluminum
Input Power120 V: 24.3 A, 50/60 Hz, single-phase240 V: 16.6 A, 50/60 Hz, single-phase
Rated Output120 V: 115 A at 19.8 VDC, 20% duty cycle240 V: 150 A at 21.5 VDC, 40% duty cycle
Advanced Auto-Set™ now includes five differentwire/gas combinations and .024-inch (0.6 mm)wire capability. The easiest welder to use justbecame more versatile.• Wire/gas combinations include Flux Cored,
Mild Steel with 100% CO2, Mild Steel with C25,Stainless Steel, and Aluminum with spool gun
• Select the wire type and gas being used• Set the wire diameter, and select from .024,
.030 and .035 diameters. A blue LED indicatesthat Auto-Set is activated
• Dial in the thickness of what you’re welding• Start welding with the exact parameters
you need!
Inverter technology combines best-in-class arccharacteristics with the portability of a 38-poundmachine. The arc is extremely forgiving tovariations in arc length and travel speeds.
Multi-voltage plug (MVP)allows connection tocommon 120- and 240-volt power receptacleswithout the use of anytools — simply choose the plug that fits thereceptacle and connect to the power cord.
Angled cast-aluminum drive system withcalibrated tension knob creates consistent feedingand easy setup for up to 15-foot MIG guns.
Quick Select™ drive roll makes setup quicker byoffering three grooves— two for different sizesolid wire and a third for flux-cored wire.
Auto Spool Gun Detect™ automatically detectswhen a MIG gun or spool gun is connectedeliminating the need for a switch.
Fan-On-Demand™ power source cooling systemoperates only when needed, reducing noise,energy use and the amount of contaminantspulled though the machine.
Smooth-Start™ provides a smooth, spatter-freestart. It’s the best-starting machine in the smallMIG machine category.
Thermal overload protection shuts down unitand activates the over temperature light ifairflow is blocked or duty cycle is exceeded.Automatically resets when unit cools.
Uses 4- or 8-inch (102 or 203 mm) spoolsand can be set up to weld with .024–.035 inch (0.6–0.9 mm) solid wire and .030–.045 inch(0.8–1.2 mm) flux-cored wire.
QuickSpecs
Millermatic® 211
Welder is warranted for three years, parts and labor. Gun warranted for 90 days, parts and labor.
Uses 120- or 240-volt power
120 or240 V
INPUT POWER
Weld capacity
3∕8(9.5 mm)
24 ga.(0.8 mm)
"
Portable
WEIGHSONLY
38lb.
Quick and easy setup
MAT
ERIAL THICKNESS
Comes complete with:Power source6.5 ft. (2 m) power cord with MVP plugs for 120 V and 240 V10 ft. (3 m) M-100 MIG gun and cableassembly 10 ft. (3 m) work cable with clampFlow gauge regulator and gas hose forargon and AR/CO2 mixHobart® spool of .030 in. (0.8 mm) solid wireTwo contact tips for .030 in. (0.8 mm) wireQuick Select™ drive rolls for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wireMaterial thickness gauge229895 Hook-and-loop cord wraps
Note: Shielding gas and safety equipment not included.
MIG Power Source, Wire Feeder and Gun Package
Miller Electric Mfg. Co.An ITW Welding Company1635 West Spencer StreetP.O. Box 1079Appleton, WI 54912-1079 USA
MillerWelds.comEquipment Sales US and CanadaPhone: 866-931-9730FAX: 800-637-2315International Phone: 920-735-4554International FAX: 920-735-4125
3
67
8
9
12
45
2
1
11
10
0
20
40
60
80
100
0 25 50 75 100 125 150 200 225175
Amps
Volts
Volt/Amp Curves
% Duty Cycle
Wel
d Am
pere
s
250
200
150
100
50
010 50403020 60 70 80 90100
Duty Cycle Chart
240 V
120 V, 20 A
240 V Maximum
120 V Maximum
120/240 V Minimum
Performance Data
2
Control Panel
Operation Modes
Specifications (Subject to change without notice.)
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
Rated Output
115 A at 19.8 VDC,20% duty cycle
150 A at 21.5 VDC,40% duty cycle
Max. Open-Circuit Voltage
54
Amps Input at Rated Output, 50/60 Hz120 V 240 V KVA KW
24.3 – 2.9 2.9
– 16.6 4.0 4.0
Wire Feed Speed
60–600 ipm (1.5–15.2 m/min.)
Wire Type and Diameter
Solid/stainless: .024–.035 in. (0.6–0.9 mm)Flux-cored: .030–.045 in. (0.8–1.2 mm)
Dimensions
H: 12.5 in. (318 mm)W:11.25 in. (286 mm)D: 20.5 in. (521 mm)
NetWeight
38 lb.(17.2 kg)
42 lb.(19.1 kg)with gun
1. Power On Light 2. Over Temperature Light 3. Auto-Set Light 4. Wire Speed/Wire Diameter Control 5. Wire Selector Knob 6. Voltage/Material Thickness Control 7. Plastic Hub with Retaining Ring for
8-inch Spools (shaft also accepts 4-inch spools)
8. Calibrated Tension Knob 9. T-Knob (secures torch)10. Drive Roll11. Trigger Control Connector12. Polarity Changeover Terminals
Note: Power switch and gas solenoid are on machine back panel.
AmperageRange
30–130 A
30–230 A
InputPower
120 V
240 V
Auto-Set eliminates guesswork and saves you time on setup. Turn wire selector knob to selectthe wire and gas combination being used. Turn wire speed control fully clockwise to selectAuto-Set mode and set the wire diameter to either .024, .030 or .035 inch. The Auto-Set lightindicates mode is activated. Then select material thickness using the Auto-Set control.
Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Auto-Set automatically sets your welder to the proper parameters. It’s available for weldingwith .024-, .030- and .035-inch steel and stainless steel wires, .030- and .035-inch flux-coredwires, and .030- and .035-inch 4043 aluminum wires with the Spoolmate 100 spool gun.Shielding gas is dependent on the wire being used.
Auto-Set™ mode
Manual mode
When welding outside of Auto-Setcapabilities, or if you prefer customparameters, use manual mode. Theparameter chart on the inside of the accessdoor is an easy-to-use guide for deter miningyour voltage and wire feed speed settings.To optimize arc starts, turn wire selectorknob to select the wire and gas combinationbeing used. Reference the white areas on thecontrols when welding in manual mode.
Contact Tips087299 .024 in. (0.6 mm)000067 .030 in. (0.8 mm)000068 .035 in. (0.9 mm)000069 .045 in. (1.2 mm)
Contact Tip Adapter 169716
Replacement Liners194010 .024 in.194011 .030–.035 in. (standard)194012 .035–.045 in.15-foot length — trim to size needed.
Nozzle 1697151/2-inch (13 mm) diameter orifice. Nozzle flush with contact tip (standard).
Gasless Flux-Cored Nozzle226190For M-100 gun only.
For use with self-shielding flux-cored wires.Improves visibility, eases access in tightcorners, protects tip adapter/gas diffuser fromspatter and from shorting to the workpiece.
Drive Rolls
Quick Select™ 261157For .024-inch (0.6 mm) or .030/.035-inch(0.8/0.9 mm) solid wire, and .030/.035-inch(0.8/0.9 mm) flux-cored wire.
Dual Groove, V-Knurled 202926For .030/.035-inch (0.8/0.9 mm) or .045-inch (1.2 mm) flux-cored wire.
M-Series Gun Consumable Kits 234607 .024 in. (0.6 mm)234608 .030 in. (0.8 mm)234609 .035 in. (0.9 mm)Each kit contains ten contact tips, one nozzle,and one contact tip adapter.
For Spoolmate™ 100 Spool Gun
Contact Tips (5 per package)199730 .024 in. (0.6 mm)186419 .030 in. (0.8 mm)186406 035 in. (0.9 mm)
Nozzle 186405
For Spoolmate™ 150 Spool Gun
Contact Tips (5 per package)199387 .030 in. (0.8 mm)199388 .035 in. (0.9 mm)
Nozzle 050622
For Both Spool Guns
Drive Roll (1) 186413 For .030/.035-inch (0.8/0.9 mm) wire.
Push Roll (1) 186414 For .030/.035-inch (0.8/0.9 mm) wire.
Replacement/Optional MIG Gun
M-100 (Standard)248282 10 ft. (3 m)
M-150 (Optional)249040 12 ft. (3.7 m)249041 15 ft. (4.5 m)
All ship with liner 194011.
Spoolmate™ 100Spool Gun 300371Direct-connect spool gun for allMillermatic 140, 141,180, 190, 211 andMultimatic 200models. Handles
.030–.035 inch (0.8–0.9 mm) aluminum (4043 only) and .023–.035 inch (0.6–0.9 mm)steel/stainless steel wires. Rated at 135 amps,30-percent duty cycle. Includes 12-foot (3.7 m)cable assembly and custom carrying case.
Spoolmate™ 150Spool Gun 301272Direct-connect spool gun for allMillermatic 211 andMultimatic 200models. Handles .030–.035 inch
(0.8–0.9 mm) 4000/5000 series aluminum and.023–.035 inch (0.6–0.9 mm) steel/stainlesssteel wires. Rated at 150 amps, 60-percent dutycycle. Includes 20-foot (6.1 m) cable assembly.
Millermatic Protective Cover 301262
Running Gear/Cylinder Rack 301239Heavy-dutyconstruction with 8-inch rubber rearwheels. Convenientfront handles, cableholders and plasticconsumable box.
For gas cylinders no greater than 7 inches (178 mm) in diameter or 65 pounds (29.5 kg) in weight.
3
Genuine Miller® Accessories
Purchase the Millermatic 211 package(951603) and receive the Millermatic 211and running gear/cylinder rack (301239)packaged together!
For M-100/M-150 Gun
Consumables (Order from Miller Service Parts.)
Power Source and Options Stock No. Description Qty. Price
Millermatic® 211 907614 120/240 V, 50/60 HzMillermatic® 211 with Running Gear/Cyl Rack 951603 Power source packaged with 301239 running gear/cylinder rack
Guns
M-100 Gun (Standard) 248282 10 ft. (3 m), .030 –.035 in. (0.8 – 0.9 mm)
M-150 Gun (Optional) 249040 12 ft. (3.7 m), .030 –.035 in. (0.8 – 0.9 mm) 249041 15 ft. (4.5 m), .030 –.035 in. (0.8 – 0.9 mm)
Spoolmate™ 100 Spool Gun 300371 12 ft. (3.7 m). Includes custom carrying case
Spoolmate™ 150 Spool Gun 301272 20 ft. (6.1 m)
Accessories
Protective Cover 301262
Running Gear/Cylinder Rack 301239
Material Thickness Gauge 229895
Flux-Cored Wire
Solid Wire
Shielding Gas Cylinder
Helmet/Gloves/Scratch Brush
Available Through Miller Service Parts
Flow Gauge Regulator for Argon or AR/CO2 Mix 268546 Replacement standard regulator
Flow Gauge Regulator for CO2 212492 Required if using 100-percent CO2 gas
Contact Tips See page 3
Contact Tip Adapter 169716 For M-100 and M-150 guns
Replacement Liners See page 3
Nozzles See page 3
Gasless Flux-Cored Nozzle 226190 For M-100 gun
Drive Rolls See page 3
M-Series Gun Consumable Kits 234607 .024 in. (0.6 mm) 234608 .030 in. (0.8 mm) 234609 .035 in. (0.9 mm)
Date: Total Quoted Price:
Typical Installations
Ordering Information
© 2016 Miller Electric Mfg. Co.
Distributed by:
Work
Optional spool gun
Work
Shieldinggas cylinder MIG gun
Shieldinggas cylinder
MIG (GMAW) or Flux-Cored (FCAW)Basic Equipment
Aluminum MIG (GMAW)Basic Equipment
Publication E7.55 | Issue D ate 06/14© Lincoln Global, Inc. All Rights Reserved.
POWER MIG ® 256WIRE FEEDER/WELDERS
Processes MIG, Flux-Cored
Product Number K3068-1 208/230 K3068-2 230/460/575 K3069-1 208/230 One-Pak®
Input Power K3068-1 & K3069-1: 208/230/1/60 K3068-2: 230/460/575/1/60Input Current at Rated Output 56 A @ 208 V /52 A @ 230 VRated Output 250A/26V/40% Duty CycleMax. Open Circuit Voltage 40V
Amperage Range 30 - 300 AWire Feed Speed 50 - 700 IPM (1.3 - 17.7 m/min)Weight/Dimensions (H x W x D) 220 lbs. (100 kg) 31.8 x 18.9 x 38.8 in. (808 x 480 x 985 mm)
1PHASE
INPUT OUTPUT
LINCOLN ELECTRIC
ISO 9001:200014001:2004
POWER MIG.® The Professional’s Choice
SM
.
The POWER MIG® 256 sets the standard for MIG and flux-cored welding in light industrial job shop fabrication, maintenance or repair work.
FEATURES Diamond Core Technology™ – Delivers a
forgiving arc, excellent out-of-position arc stability, low spatter and a wide voltage sweet spot at a given wire feed speed for steel, stainless steel or aluminum.
MAXTRAC® cast aluminum industrial wire drive – Features dual driven rolls, regulated wire feed speed control, brass-to-brass connections and Lincoln’s 100% wire supporting split wire guide system.
Digital meters - For set up, meters display your preset voltage and wire feed speed. During welding, actual voltage is displayed.
New! Magnum® PRO gun and cable 15 ft. (4.5 m) - Makes it easy to reach your work.
Copper Plus™ contact tips - Larger tip diameter and mass improves heat dissipation to increase tip life.
Add a spool gun – The POWER MIG® 256 is spool gun ready for the premium Magnum® 250LX gun and spool gun capable with the Magnum® SG (requires adapter).
115V auxiliary receptacle - (208/230V model only) to power a grinder or other auxiliary equipment in your work area.
New! Great value-adding features – • Coil Claw™ Cable Management system keeps your workstation organized. • Convenient top-mounted gun expendables tray.
• All metal case front.
WHAT’S INCLUDEDK3069-1 One-Pak® Includes: POWER MIG® 256 with Magnum® PRO 250L Magnum® 250LX Spool Gun (K2490-1) Dual Cylinder Mounting Kit (K1702-1) Regulator (K586-1) Input Cable(1) The POWER MIG® 256 cannot be powered by
an engine-driven welder.
Shown K3068-1
THE LINCOLN ELECTRIC COMPANY22801 St. Clair Avenue • Cleveland, OH • 44117-1199 • U.S.A.
PH: +1.216-481-8100 • www.lincolnelectric.com
Two Year Extended Warranty Available in the U.S.A. and
Canada
APPLICATIONS(1) Metal Fabrication Maintenance and Repair Farm/Autobody Light Industrial
Best Magnum® 250LX
SPOOL GUNSBetter Magnum® SG
TM
[ 2 ] | POWER MIG® 256
Easy Load Gas Cylinder Platform
Easy Load Wire Compartment
Extra–Length 15 ft. (4.5 m) Gun
Additional Gas Solenoid – Controls Gas Flow to a Spool Gun
Timer Functions Adds 4-step trigger interlock, spot mode, adjustable run-in speed for smoother arc starting, and adjustable burnback time to minimize wire sticking in puddle.
Magnum® PRO 250L Gun With long lasting Copper Plus™ contact tips
1. Digital meter displays preset wire feed speed.
2. Wire speed control with fine resolution at low settings.
3. Digital meter displays preset voltage setting and actual voltage while welding.
4. Voltage control with fine resolution at low settings.
5. Angled gun connection for improved feedability.
6. Second gas solenoid fitting for spool gun use.
2
1 3
5
4
6
A CLOSER LOOK
KEY CONTROLS
Keeps your workstation organized
TM
Gun Expendable Parts Compartment
POWER MIG® 256 | [ 3 ]
GUN INFORMATION
SPOOL GUN CAPABLE MEDIUM DUTY
SPOOL GUN READY HEAVY DUTY
Magnum® SG Spool Gun (K487-25)
Magnum® 250LX Spool Gun (K2490-1)
• 250A, 60% duty cycle.
• .025 - 3/64 in. (0.6-1.2 mm) electrode diameter capability.
• Wire feed speeds from 50-650 ipm (1.2-16.5 m/min.).
• 25 ft. (7.6 m) gun cable length – compare to the competition.
• Adjustable speed control at the handle – allows you to tailor the WFS setting at the gun.
• See E12.22 for expendable parts.
• Order K487-25 spool gun and K2445-1 control cable adapter.
• 300A, 60% duty cycle.
• .025 - 3/64 in. (0.6-1.2 mm) electrode diameter capability.
• Wire feed speeds up to 800 ipm (20.3 m/min.).
• 25 ft. (7.6 m) gun cable length with 7-pin MS-type connector.
• WFS control for fine adjustment of wire feed speed at the gun.
• Zippered cable jacket is standard.
• See E12.25 for expendable parts.
• Order K2490-1.
(1) Included with POWER MIG® 256.
Included Magnum® PRO 250L Gun
• Rated 250A @ 60% duty cycle with CO2 shielding gas.
• Ships equipped to feed .035 in. – .045 in. (0.9 – 1.2 mm) wire. The Magnum® PRO 250L is capable of feeding .025 in. – .045 in. (0.6 – 1.2 mm) wire.
• Industrial Grade Construction -
- High quality copper parts ensure superior electrical contact and heat dissipation.
- Four trigger leads are standard for fast field repair.
- Patent-pending Anti-Seize™ tip and diffuser thread design reduces tip and diffuser seizing.
Split guides support the wire through the entire drive system to minimize
feeding problems.
Wide idler arm hinge provides improved drive roll clamping pressure.
Removable outer wire guide for easy access.
Input bushing protects the wire from damage.
Reliable brass-to-brass gun receiver bushings provide connectivity to
Magnum® or competitive guns. Easier interchangeability, better mechanical
support and electrical current transfer.
Easy turn numeric tension indicator with optimized ranges for different wire types.
Internal feedback drive system Maintains constant wire feed speed for
consistent welds.
Separate drive gear reduces pressure on motor shaft for long life.
Two gear driven rolls. No tools needed to swap rolls on or off.
Angled gun cable connection for improved feedability and reduced gun
liner wear. A patented heavy duty cast aluminum wire drive system that provides reliable feeding and increased durability.
DRIVE ROLL KITS
Wire Size in. (mm)
Order Number
Solid .023-.030 (0.6–0.8).035 in. (0.9)
.035/.045 combination.040 (1.0).045 (1.2)
KP1696-030SKP1696-035S(1)
KP1696-1KP1696-2
KP1696-045S
Cored .035 (0.9).045 (1.2)
KP1697-035CKP1697-045C
Aluminum 3/64 (1.2) KP1695-3/64A
Improved Spool Gun Operation!
Set wire feed speed at the gun – see the pre-set wire feed speed displayed on the POWER MIG® 256 meter.
Faster set-up – No more guessing on wire feed speed!
Adjust speed on the gun and watch the wire feed speed change on the POWER MIG® 256.
C U S T O M E R A S S I S T A N C E P O L I C Y The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the cus-tomer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
Product Name
Product Number
Input Power
Rated Output
Current/Voltage/Duty Cycle(3)
Input Current
@ Rated Output
Output Range
H x W x D
inches (mm)
Net Weight
lbs. (kg)
POWER MIG® 256One-Pak®
Spool Gun Pkg.
POWER MIG® 256Base Unit
K3069-1
K3068-1
K3068-2(2)
208/230/1/60
208/230/1/60
230/460/575/1/60
250A/26V/40%
250A/26V/40%
56/52A(1)
56/52A(1)
50/24/19A
30-300 Amps50-700 ipm WFS(1.3-17.7 m/min)Max. OCV: 40V30-300 Amps
50-700 ipm WFS(1.3-17.7 m/min)Max. OCV: 40V
31.8 x 18.9 x 38.8(808 x 480 x 985)
220(100)
(1) Input current is at the rated output with the 115V auxiliary receptacle also drawing 15 amps.(2) Does not include input cable.(3) The POWER MIG® 256 cannot be powered by an engine-driven welder
PRODUCT SPECIFICATIONS
GENERAL OPTIONS
Dual Cylinder Mounting Kit Permits side-by-side mounting of two full size gas cylinders. Attaches easily to POWER MIG® undercarriage. Order K1702-1
Canvas Cover This red canvas cover is flame retardant, mildew resistant and water repellent. Fits any POWER MIG® machine with or without a gas cylinder in the cylinder rack. Will not fit if spool gun holder or Cable Claw™ is attached to the machine. Order K2378-1
WIRE FEEDER OPTIONS
Magnum® PRO Guns Choose Magnum® PRO GMAW/FCAW Barrel or Curve™ or fume models or select a K126™ PRO FCAW model. See publication E12.09
Magnum® Connection Kit Permits use of Magnum® 200, 300 and 400 gun and cable assemblies. Order K466-6
Magnum® SG Spool Gun 250 amp, 60% duty cycle with 25 ft. (7.6 m) cable length. Feeds .025 - 3/64 in. (0.6 - 1.2 mm) diameter wire. Single turn remote wire feed speed control at the gun. Adjustable wire spool brake and adjustable drive roll tension. Order K487-25 Requires K2445-1 Adapter
Magnum® SG Spool Gun Control Cable Adapter Connect the K487-25 Magnum® SG Spool Gun 6-pin control cable plug to the POWER MIG® 256 7-pin spool gun control cable receptacle. Order K2445-1
Magnum® 250LX Spool Gun 300 amp, 60% duty cycle with 25 ft. (7.6 m) cable length. Feeds .025 - 3/64 in. (0.6 - 1.2 mm) diameter wire. Multi-turn remote wire feed speed control at the gun. Adjustable drive roll tension and easy open wire drive rolls for easy wire loading. Features built-in contact tip storage. K2490-1 Factory Ready
Magnum® 250LX Spool Gun Control Cable Extension Extend your reach by 25 ft. (7.6 m). Features a 7-pin female MS-type connector on the spool gun end and a 7-pin male MS-type connector on the power source end. Order K2519-1
8 in. O.D. Spool Adapter Permits 8 in. (200 mm) O.D. spools to be mounted on 2 in. (51 mm) O.D. spindles. Order K468
Welding Fume Extractors Lincoln Electric offers a wide variety of welding fume extraction environmental system solutions. Request Publication MC08-70
RECOMMENDED ACCESSORIES
PROCESS CAPABILITIES
Process
Electrode Wire
Electrode Polarity
Shielding Gas
Minimum Thickness
Maximum Thickness(1)
MIG Mild Steel
.025, .030, .035, .045 in.(0.6, 0.8, 0.9, 1.1 mm)
SuperArc® L-50, L-56, SuperGlide® S3, S6
DC+ 100% CO2 or Ar/CO2 Blend 22 ga. (.030 in.)(0.8 mm)
1/2 in. (.500 in.)(12.7 mm)
MIGStainless
.030, .035, .045 in.(0.8, 0.9, 1.1 mm)
Blue Max® 308LSi, 309LSi, 316LSi
DC+ Ar/CO2 Blendor (Tri-Mix)
16 ga. (.060 in.)(1.6 mm)
5/16 in. (.312 in.)(7.9 mm)
MIGAluminum
3/64 in.(1.2 mm)
SuperGlaze® 4043 and 5356
DC+ 100% Argon 16 ga. (.060 in.)(1.6 mm)
1/2 in. (.500 in.)(12.7 mm)
Flux-Cored,Gas-Shielded
Mild Steel
.035, .045 in.(0.9, 1.1 mm)
Outershield® 71M
DC+ 100% CO2 or Ar/CO2 Blend 12 ga. (.109 in.)(2.7 mm)
5/16 in. (312 in.)(7.9 mm)
Flux-Cored,Self-Shielded
Mild Steel
.035, .045 in.(0.9, 1.1 mm)
Innershield® NR-211-MP(2) and NR-212
DC- — 18 ga. (.050 in.)(1.2 mm)
3/4 in. (.750 in.)(19.1 mm)
(1) Lincoln Electric recommends multiple pass welds on 1/2 in. (12.7 mm) material. Consult the appropriate application procedures and guidelines for selecting the correct wire size, gas type and number of passes.
(2) .035 and .045 in. (0.9 and 1.1 mm) Innershield® NR-211-MP is only recommended up to 5/16 in. (7.9 mm) thick material.