Post on 10-Sep-2018
13
Millenium II+: general characteristics
Insulation 7 MΩSafety class 0 industrial/II domestic casingEarthing NoneProtection IP20/Terminal blocks IP40
IP00 for CN12 and CN20 versionsCertifications CE, UL, cULConformity to standards EN 60947-1
EN 60730-1EN 60601-1
Programming method Function blocks/SFCProgram size 128 blocksProgram memory Flash EEPROMRemovable memory EEPROMData memory 256 bits/64 words backed up for 10 yearsLCD display Display with 4 lines of 12 charactersReal-time clock Drift < 1 min/month at 25°C with user-
definable correction of driftData retention : 10 years (lithium battery)
Storage temperature (0C) -40 +70Operating temperature (o C) -5 +55Relative humidity no condensation acc. to IEC 68-2-3
95 % max.
Dimensions (l x h x p) SA12-EC12 : 72 x 90 x 60 mmSA20-XT20-EC20-EX20 : 125 x 90 x 60 mmCN12 : 72 x 90 x 42 mmCN20 : 125 x 90 x 42 mm
Power supply 100 ... 240 V ACOperating voltage 100 V AC 240 V AC +10 % -15 %
50/60 HzOperating limits 85 V AC 264 V ACImmunity from micro power cuts 10 msMaximum inrush current 5 AMax. absorbed power SA12-EC12-CN12 : 6 VA
SA20-EC20-CN20 : 6.5 VAXT20-EX20 : 8 VA
Power supply 24 V ACOperating voltage 24 V AC +10 % -15 % 50/60 HzOperating limits 20.4 V AC 28.8 V ACImmunity from micro power cuts 10 msMaximum inrush current 2.5 AMax. absorbed power SA12-EC12-CN12 : 6 VA
SA20-EC20-CN20 : 6.5 VAXT20-EX20 : 8 VA
Power supply 24 V DCOperating voltage 24 V DC +20 % -15 %Operating limits 20.4 V DC 28.8 V DCImmunity from micro power cuts 1 msMaximum inrush current 6 AMax. absorbed power SA12-EC12-CN12 : 3.5 W
SA20-EC20-CN20 : 4 WXT20-EX20 : 5 W
Power supply 12 V DCOperating voltage 12 V DC +30 % -15 % (+30 % -11
% for XT 20 relay 88 950 065)Operating limits 10.2 V DC 15.6 V DC (10.68 V
DC 15.6 V DC for XT20 relay 88 950 065)
Immunity from micro power cuts 1 msMaximum Inrush current 6 AMax. absorbed power SA12-EC12-CN12 : 2.2 W
SA20-EC20-CN20 : 4.5 WXT20-EX20 : 5.5 W
100 - 240 V AC inputInput voltage (V AC) 100 - 240 (+10 % / -15 %)Supply frequency range (Hz) 50/60Input impedance (kΩ ) 700Pull-in voltage at logic state 1 (V AC) ≥ 80Drop-out voltage at logic state 0 (V AC) ≤ 40Response time 50Status indicator On LCD screen for SA12, SA20 and XT2024 V AC inputInput voltage (V AC) 24 (+10 % / -15 %)Supply frequency range 50/60 HzInput impedance (kΩ ) 4Pull-in voltage at logic state 1 (V AC) ≥ 15Drop-out voltage at logic state 0 (V AC) ≤ 5Response time 50 msStatus indicator On LCD screen for SA12, SA20 and XT20
Analogue input (24 V DC model only)CN12-SA12-EC12 4 inputs from I5 to I8CN20-SA20-EC20-XT20 8 inputs from I5 to I12Measurement range (0 10 V) or (0 V power supply)Resolution 8 bitsConversion time 10 msMax input voltage 28.8 V DCInput impedance (kΩ) > 22Accuracy +/- 5 %Drift Temperature +/- 3 LSBPotentiometer control 2.2 kΩ / 0.5 W24 V DC inputCurrent drain 24 (+20 % -15 %) V DCInput current 3.2 mA / 5.5 mA max.Input impedance 6.8 kΩPull-in voltage at logic state 1 ≥ 15 V DCDrop-out voltage at logic state 0 ≤ 5 V DCResponse time 10 msGalvanic isolation NoSensor type Contact or 3-wire PNP or 3-wire
NPNStatus indicator On LCD screen for SA12, SA20 and
XT2012 V DC inputInput voltage 12 (+30 % -15 %) V DC (except
XT20R +30 % -11 %)Input current 1.9 mA / 2.3 mA max.Input impedance 6.45 kΩPull-in voltage at logic state 1 ≥ 8 V DCDrop-out voltage at logic state 0 ≤ 3 V DCResponse time 10 msSensor type Contact or 3-wire PNP or 3-wire NPNGalvanic isolation NoStatus indicator On LCD screen for SA12, SA20 and
XT20Analogue input (12 V DC model only)CN12 - SA12 - EC12 4 inputs I5 to I8CN20-SA20-EC20-XT20 8 inputs I5 to I12Measurement range 0 10 VResolution 8 bitsConversion time (ms) 10Max input voltage 15.6 V DCInput impedance (kΩ) > 10 (14 typical)Precision ± 5 %Temp. dependent derating ± 3 LSBPotentiometer control 2.2 kΩ / 0.5 WRelay outputMax. breaking voltage 250 V AC / 30 V DCBreaking current 8 AService life 8 A / 250 V AC resistive (100.000
operations)Minimum load 10 mA 5 V DCResponse time 10 msStatus indicator On LCD screen for SA12, SA20 and
XT20TOR / PWM solid state outputPWM solid state output SA12-EC12-CN12 : O1 to O4
SA20-XT20-EC20-CN20 : O1 to O6Breaking current 5-28.8 V DCBreaking voltage 0.7 A / 5-28.8 V DCMin. load 1 mAMaximum inductive load 0.7 AMaximum incandescent load 0.1 ALeakage 0.1 mA / 24 V DCResponse time 1 msInsulation NoPWM frequency 113 Hz to 1807 Hz (user-definable)PWM cyclic ratio 0 to 100 % (256 steps)PWM precision at 120 Hz < 5 % (from 15 % to 85 %) load at 10 mAPWM precision at 500 Hz < 10 % (from 20 % to 80 %) load at 10 mAStatus indicator On LCD screen for SA12, SA20 and XT20
14
Discover the benefits of Millenium II+ Each kit includes :
- a standard (SA) or expandable (XT) Millenium II+- a PC/Millenium II connection interface- an interactive CD-ROM including the software workshop, tutorial, application library and technical brochures plus for the STN or GSM kits- an STN or GSM modem- a PS24 power supply
Type Input Output Supply CodeSA 12 kit 8 PNP 4 relays 24 V DC 88 950 070
8 4 relays 100 - 240 V AC 88 950 071Kit SA 20 12 PNP 8 relays 24 V DC 88 950 072
12 8 relays 100 - 240 V AC 88 950 073Kit XT 20 12 PNP 8 relays 24 V DC 88 950 074
12 8 relays 100 - 240 V AC 88 950 075STN modem kit 8 PNP 4 relays 24 V DC 88 950 818GSM modem kit 8 PNP 4 relays 24 V DC 88 950 819
Discover the benefits of Millenium II+ with all the extras needed for your application
Each kit includes : - a Millenium II+- a programming software CD-ROM- a programming cableplus for the Level Control kit- a level sensor adaptor- 4 S7 level sensors plus for the Temperature Control kit- a PS24 power supply- a -10 +150°C remote temperature sensor- a 25A solid state relay with heatsink
Type Designation Supply CodeLevel control kit Level control 24 V AC 88 950 076Temperature Control kit Heating, cooling and air conditioning 24 V DC 88 950 077
Starter kit
Specifications
Special starter kits
Specifications
15
Intuitive programming via function block (FBD) or grafcet (SFC)
Function : timing, counting, etc Application-specific functions : rotation, cam timers,
calculation, etc Discrete, analogue or potentiometer inputs Relay, solid state or PWM outputs Backlit LCD display Program password protection Integral calender and clock User-definable from the front panel Non-expandable
Type Input Output Supply CodeSA 12 8 PNP 4 relays 24 VDC 88 950 041
8 4 relays 100 - 240 VAC 88 950 0438 4 relays 24 VAC 88 950 0448 PNP 4 solid state 24 VDC 88 950 0428 PNP 4 relays 12 V DC 88 950 0458 PNP 4 solid state 12 V DC 88 950 0468 NPN 4 relays 24 VDC 88 950 049
SA 20 12 PNP 8 relays 24 VDC 88 950 05112 8 relays 100 - 240 VAC 88 950 05312 8 relays 24 VAC 88 950 05412 PNP 8 solid state 24 VDC 88 950 05212 PNP 8 relays 12 V DC 88 950 05512 PNP 8 solid state 12 V DC 88 950 05612 NPN 8 relays 24 VDC 88 950 059
SA 12 SA 20
see page 13
Standard
Specifications
Dimensions
59,2 mm 60 mm
90
mm
82
mm
Esc OK
BA
72 mm
L1 N I1 I2 I3 I4 I5 I6 I7 I8
O1 O 2 O3 O4
60 mm112,6 mm
125 mm
Esc OK
BA90 m
m
82 m
m
L1 N I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12
General characteristics
16
No display or parameter-setting buttons Intuitive programming via function block (FBD) or
grafcet (SFC) Function : timing, counting, etc Application-specific functions : rotation, cam timers,
calculation, etc Discrete, analogue or potentiometer inputs Relay, solid state or PWM outputs Program protected by a password Integral calendar and clock
Type Input Output Supply CodeEC12 8 PNP 4 relays 24 VDC 88 950 021
8 4 relays 100 - 240 VAC 88 950 0238 4 relays 24 VAC 88 950 0248 PNP 4 solid state 24 VDC 88 950 0228 PNP 4 relays 12 V DC 88 950 0258 PNP 4 solid state 12 V DC 88 950 0268 NPN 4 relays 24 VDC 88 950 029
EC 20 12 PNP 8 relays 24 VDC 88 950 03112 8 relays 100 - 240 VAC 88 950 03312 8 relays 24 VAC 88 950 03412 PNP 8 solid state 24 VDC 88 950 03212 PNP 8 relays 12 V DC 88 950 03512 PNP 8 solid state 12 V DC 88 950 03612 NPN 8 relays 24 VDC 88 950 039
EC 12 EC 20
see page 13
Blind
Specifications
Dimensions
59,2 mm 60 mm
90
mm
82
mm
72 mm
L1 N I1 I2 I3 I4 I5 I6 I7 I8
O1 O 2 O3 O4
60 mm112,6 mm
125 mm
90 m
m
82 m
m
L1 N I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12
General characteristics
17
Expandable : communication, I/O, etc Can take an XC adjacent extension and an XL local
extension Intuitive programming via function block (FBD) or
grafcet (SFC) Function : timing, counting, etc Application-specific functions : rotation, cam timers,
calculation, etc Discrete, analogue or potentiometer inputs Relay, solid state or PWM outputs Backlit LCD display (XT 20 only) Program password protection Integral calender and clock User-definable from the front panel (XT 20 only)
Type Input Output Supply CodeXT 20 12 PNP 8 relays 24 V DC 88 950 061
12 8 relays 100 - 240 V AC 88 950 06312 8 relays 24 V AC 88 950 06412 PNP 8 solid state 24 V DC 88 950 06212 PNP 8 relays 12 V DC 88 950 06512 PNP 8 solid state 12 V DC 88 950 06612 NPN 8 relays 24 V DC 88 950 069
EX 20 12 PNP 8 relays 24 V DC 88 950 83112 8 relays 100 - 240 V AC 88 950 83312 8 relays 24 V AC 88 950 83412 PNP 8 solid state 24 V DC 88 950 83212 PNP 8 relays 12 V DC 88 950 83612 PNP 8 solid state 12 V DC 88 950 83712 NPN 8 relays 24 V DC 88 950 839
XT 20 EX 20
see page 13
Expandable
Specifications
Dimensions
60 mm112,6 mm
125 mm
Esc OK
BA90 m
m
82 m
m
L1 N I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12
60 mm112,6 mm
125 mm
90 m
m
82 m
m
L1 N I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12
General characteristics
18
For mass-production applications Intuitive programming via function block (FBD) or
grafcet (SFC) Function : timing, counting, etc Application-specific functions : rotation, cam timers,
calculation, etc Discrete, analogue or potentiometer inputs Relay, solid state or PWM outputs Program protected by password Integral calendar and clock
Type Input Output Supply CodeCN 12 8 PNP 4 relays 24 V DC 88 950 001
8 4 relays 100 - 240 V AC 88 950 0038 4 relays 24 V AC 88 950 0048 PNP 4 solid state 24 V DC 88 950 0028 PNP 4 relays 12 V DC 88 950 0058 PNP 4 solid state 12 V DC 88 950 0068 NPN 4 relays 24 V DC 88 950 009
CN 20 12 PNP 8 relays 24 V DC 88 950 01112 8 relays 100 - 240 V AC 88 950 01312 8 relays 24 V AC 88 950 01412 PNP 8 solid state 24 V DC 88 950 01212 PNP 8 relays 12 V DC 88 950 01512 PNP 8 solid state 12 V DC 88 950 01612 NPN 8 relays 24 V DC 88 950 019
CN 12 CN 20
see page 13
Bare board
Specifications
Dimensions
59,2 mm 42 mm
90
mm
82
mm
72 mm
42 mm112,6 mm
125 mm
90 m
m
82 m
m
General characteristics
19
All Millenium II+ functions with, in addition : - control and braking of one or two DC motors- mixed relay and solid state outputs- 15A relay outputs
Type Designation Input Output Supply CodeSA 4R 1 DC motor control 8 PNP 4 relay outputs (2 mounted in H layout) 24 VDC 88 950 880SA 4R2T 2 DC motors control 12 PNP 4 relay outputs (2x2 mounted in H layout)
& 2 PWM outputs24 VDC 88 950 881
Electrical characteristicsOperating voltage 24 VDC +20 % / -15 %Maximum inrush current 7 AImmunity from micro power cuts (ms) 1Absorbed power (W) 88 950 880 : 3.5
88 950 881 : 4Relay outputRelay outputs 88 950 880 : 2 x 8A NO, 2 x 15A NO/NC
88 950 881 : 4 x 15A NO/NCMin. load 10 mA / 5 VDC (for 8 A relay)
100 mA / 10 VDC (for 15 A relay)Maximum breaking voltage 250 VACMax. current (A) 88 950 880 : 8 A / 15 A
88 950 881 : 15 AMechanical life (operations) 30 x 106
Electrical life 53.000 operations 16 A / 250 VAC resistive NC contact6000 operations 20 A / 250 VAC N/O contact30.000 operations 20 A / 24 VDC resistive
Insulation YesType of contacts 90/10 AgNiResponse time (ms) 10Logic outputs / PWMPWM solid state output O5, O6Minimum load 1 mABreaking voltage 5 - 28.8 VDCBreaking current 0.7 A / 5 - 28.8 VDCMaximum inductive load 0.7 ALeakage current 0.1 mA / 24 VDCResponse time (ms) 1Insulation NoPWM frequency 113 Hz 1807 HzPWM cyclic ratio 0 100 %PWM precision at 120 Hz <5 % (from 15 % to 85 %) load at 10 mAPWM precision at 500 Hz <10 % (from 20 % to 80 %) load at 10 mAIndicator LCD screen
SA 4R SA 4R2T Current/voltage
B resistive load
Motor control
Specifications
General characteristics
Dimensions Curves
59,2 mm 60 mm
90
mm
82
mm
Esc OK
BA
72 mm
L1 N I1 I2 I3 I4 I5 I6 I7 I8
O1 O 2 O3 O4
60 mm112,6 mm
125 mm
Esc OK
BA90 m
m
82 m
m
L1 N I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12
0,1 0,2 0,5 1 2 5 10 20 I (A)10
20
30405030
100
200
300
VDC
1
20
Operating temperature -30 to +70°C 4 relay outputs and 2 PWM outputs Standard (EC) and bare board (CN) versions Monobloc, non-expandable
Type Designation Input Output Supply CodeCN 4R2T Clima + 12 PNP 4 relays
2 PWM solid state24 VDC 88 950 411
EC 4R2T Clima + 12 PNP 4 relays2 PWM solid state
24 VDC 88 950 431
Electrical characteristicsOperating voltage 24 VDC +20 %/-15 %Maximum inrush current 7 AImmunity from micro power cuts (ms) 1Absorbed power (W) 4Relay outputRelay outputs 4 x 8A NO/NCMin. load 100 mA / 10 VDCMaximum breaking voltage 250 VACMax. current (A) 8Mechanical life (operations) 30 x 10 6
Electrical life 53.000 operations 16A/250VAC resistive NC contact6000 operations 20A/250VACN/O contact30.000 operations 20A/24VDC resistive
Insulation YesType of contacts 90/10 AgNiResponse time (ms) 10Logic outputs / PWMPWM solid state output O5, O6Minimum load 1mABreaking voltage 5-28.8 VDCBreaking current 0.7A/5-28.8 VDCMaximum inductive load 0.7 ALeakage current 0.1 mA / 24 VDCResponse time (ms) 1Insulation NoPWM frequency 113 Hz to 1807 HzPWM cyclic ratio 0 to 100 %PWM precision at 120 Hz <5 % (from 15 % to 85 %) load at 10 mAPWM precision at 500 Hz <10 % (from 20 % to 80 %) load at 10 mA
CN 4R2T EC 4R2T
Clima +
Specifications
General characteristics
Dimensions
42 mm112,6 mm
125 mm
90 m
m
82 m
m
60 mm112,6 mm
125 mm
90 m
m
82 m
m
L1 N I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12
21
A unit dedicated to level detection This unit includes :
- a Millenium II+ SA 12 L (4 level detection inputs) - a level sensor adaptor
Type Input Output Supply CodeLevel detection 8 4 relays 24 V AC 88 950 813
SA 12 L Level sensor adaptor
Level detection
Specifications
Dimensions
59,2 mm 60 mm
90
mm
82
mm
Esc OK
BA
72 mm
L1 N I1 I2 I3 I4 I5 I6 I7 I8
O1 O 2 O3 O4
5,5
81
17,5
60
45
443,5
22
For XT 20 and EX 20 expandable versions only (1 local extension per module)
Millenium - Millenium local link Doubles the hardware and software capacities Transparent communication between two XT 20 units Max. distance between two XT 20 units : 10 metres Cable type : screened twisted pair
Type Designation Supply CodeXL 01 M2 - M2 local link (2 modules) universal 88 950 200XL 05 4 solid state outputs (0.5A max total current) universal 88 950 204XL 06 2 relay outputs (250mA max current each) 100 240 V AC / 24 V AC 88 950 810
For XT 20 and EX 20 expandable versions only (one adjacent extension per module)
6 additional inputs/outputs
Type Designation Supply CodeXC 01 4 inputs PNP 2 relay outputs 24 V DC 88 950 210
4 inputs 2 relay outputs 24 V AC 88 950 2114 inputs 2 relay outputs 100 - 240 V AC 88 950 2124 inputs 2 relay outputs 12 V DC 88 950 2154 inputs NPN 2 relay outputs 24 V DC 88 950 219
Data communication via STN or GSM modem Fieldbus communication using MODBUS or ASI
protocol (slave module) for XT 20 and EX 20 expandable version only (one adjacent extension per module)
Type Designation Supply CodeXC 02 AS-i communication module 24 V DC 24 V DC 88 950 213XC 04 MODBUS communication module 24 V DC 88 950 823
XC 01 XC 02 - XC 04
Local extensions
Specifications
Adjacent extensions
Specifications
Communication modules
Specifications
Dimensions
X C 0 1
36 mm
24 mm
60 mm
90
mm
82
mm
X C 0 1
36 mm
24 mm
60 mm
90 m
m
82 m
m
23
Downloading, modification and sending of the Millenium II program
Remote access to all Millenium II functionalities Automatic warning in the event of an alarm Simple configuration via the programming software DIN casing suitable for industry
Type Input Output Supply CodeModem Kit STN (56K) 2 2 10 80 V DC 88 950 106Modem kit GSM 2 2 10 80 V DC 88 950 107
Input alarmPulse length (s) 0.3 2Alarms 20 messages max. send to 40 recipients max.Destination GSM, Fax, e-mail, fixed lineGeneral messages (characters) 120Individual messages (characters) 80Outputs alarmMax. voltage 30 V DC
42 V DCMax. current 1 A DC
0.5 A ACMechanical characteristicsProtection Casing : IP40 / Terminal blocks : IP20Weight (g) 250 (RTC)
270 (GSM)Display by LED 4 for STN modem (Power, Off hook, DCD, RX/TX)
5 for GSM modem (Power, Status, Connect, RX/TX, Signal)Climatic environmentOperating temperature (o C) 0 55Relative humidity no condensation acc. to IEC 68-2-3 95 % max.Electrical characteristicsAbsorbed power (W) 2.5 (RTC)
3 (GSM)
Modems
Modems
Specifications
General characteristics
Dimensions
110 mm
75 m
m
62 m
m
55 mm
24
Backlit LCD screen with 4 lines of 20 characters with 8-key keypad including 4 keys with changeable captions- Three-colour screen : green/orange/red- Monochrome screen : green
Communicates with the Millenium II+ using the Modbus module
2 kits available : Programming and Runtime Each kit includes
- a three-colour or monochrome LCD screen- a Modbus communication module- an RS485 cable plus, for the programming kit : - a 24 V 20 I/O Millenium II- 2 sets of programming software- a power supply (according to model) - an RS232 cable
Type Designation CodeProgramming kits Kit eco monochrome LCD display
Display + Millenium II EX 20 + MODBUS module + programming software + programming cable + leaflet88 950 840
Kit eco three-colour LCD displayDisplay + Millenium II EX 20 + MODBUS module + programming software + programming cable + leaflet
88 950 841
Kit eco power supply monochrome LCD displayDisplay + Millenium II EX 20 + MODBUS module + programming software + programming cable + power supply + leaflet
88 950 842
Kit eco power supply three-colour LCD displayDisplay + Millenium II EX 20 + MODBUS module + programming software + programming cable + power supply + leaflet
88 950 843
Kit monochrome LCD displayDisplay + MODBUS module + programming software + programming cable
88 950 844
Kit standard monochrome LCD displayDisplay + Millenium II EX 20 + MODBUS module + programming software + programming cable + leaflet
88 950 845
Kit standard three-colour LCD displayDisplay + Millenium II EX 20 + MODBUS module + programming software + programming cable +leaflet
88 950 846
Kit standard power supply monochrome LCD displayDisplay + Millenium II EX 20 + MODBUS module + programming software + programming cable + power supply + leaflet
88 950 847
Kit standard power supply three-colour LCD displayDisplay + Millenium II EX 20 + MODBUS module + programming software + programming cable + power supply + leaflet
88 950 848
Kit three-colour LCD displayDisplay + MODBUS module + programming software + programming cable
88 950 849
Runtime kits Kit three-colour LCD displayDisplay + MODBUS module + programming cable + leaflet
88 950 421
Kit monochrome LCD displayDisplay + MODBUS module + programming cable + leaflet
88 950 422
Electrical characteristicsSupply voltage 24 VDCVoltage limits 18 30 VDCRipple 5 % maxConsumption 200 mA maxDisplay characteristicsDescription Backlit LCD screen with 4 lines of 20 characters to 1 line of 5 characters
each (settable) transmission indicated by LED (3-colour display) alarm indicator and function keys (3-colour display)
Mechanical characteristicsMounting flush-mounted, fixing by means of 2 pressure-mounted supplied spring
clips for panel 1.5 to 6 mm thickDisplay protection polyesterKeyboard material polyester autotex UVConnection removable 3-point screw terminal blockConnection capacity 1.5 mm2
Connection serial connector by SUB D 25 female contactsEnvironmental characteristicsCertifications UL-CSAConformity to standards IEC 1131-2, IEC 60068-2-6, IEC 60068-2-27, EN 61131-2, UL 508, CSA
C22-2 No.14Operating temperature (°C) 0 +55Storage temperature (0C) -20 +60Relative humidity no condensation acc. to IEC 68-2-3 95 % max.Degree of protection IEC 60529 IP 65 front panel (UL type 4, 4X)
IP 20 rear panelDimensions (l x h x p) 132x74x31 mmPanel cut-out 119,4 x 63 mm
Alphanumeric displays
Specifications
General characteristics
25
Display with 4 red 14 mm digits Configurable display range 0-10V input Degree of protection, front panel : IP 65
Type Designation Supply CodeDisplay Display 4 digits 14 mm red 24 VDC 88 950 400
Electrical characteristicsSupply 24 VDCTolerance ±10 %Consumption 20 mAInput voltage 0 10 VDCGeneral characteristicsNumber of digits 4Colour redHeight of digits 14 mmDevice accuracy (full scale) 0.3 %Degree of protection front face IP 65Degree of terminal protection IP 20Operating temperature (°C) -10 +55Dimensions (l x h x p) 36x72x61 mmPanel cut-out 71 x 20 mm
36x72 LED remote display
Specifications
General characteristics
26
External control potentiometer 22 mm hole Degree of protection, front panel : IP65
Type Designation CodeM2Pe External setpoint potentiometer 88 950 109
Electrical characteristicsOhmic value (Ω) 4700Tolerance ±20 %Power 150 mWGeneral characteristicsDegree of protection front face IP 65Degree of terminal protection IP 10Operating temperature (°C) -20 +60Storage temperature (0C) -20 +70Connection capacity 1 x 4 mm 2 single-strand
1 x 2.5 mm 2 multi-strand
B Panel
C Nut
D Seal
B MII+ analogue input
Potentiometer
Specifications
General characteristics
Dimensions
Ø22
1 8 mm
Ø29
14,5
28
3
2
122,3
50
50
Connections
1
+ 24 VDC
27
current-voltage convertor for Millenium II+ input signals
PWM-voltage convertor for Millenium II+ output signals
Type Designation Input Output CodeConvertor 0-20 mA / 0-10 V Input module (17.5 mm) 4 4 88 950 108Convertor PWM / 0-10V Output module (17.5 mm) 1 1 88 950 112
PT1000 / PT100 / J and K type thermocouple input 3-wire input 17.5 mm modular casing 0 10 VDC output
Type Input Temperature (oC) CodeTemperature convertor PT 1000 -20 +150 88 950 150
PT100 -40 +40 88 950 151PT 100 0 +100 88 950 152PT 100 0 +250 88 950 153J thermocouple 0 +300 88 950 154K thermocouple 0 +600 88 950 155
Electrical characteristicsSupply 24 VDCTolerance ±10 %Consumption 2 mAOutput voltage 0 10 VDCDevice accuracy (full scale) ±1 %General characteristicsProtection (sealing) IP 40Class of protection - Terminals IP 20Operating temperature (°C) -10 +55
Temperature convertor
Convertors
Specifications
Temperature convertors
Specifications
General characteristics
Dimensions
53
17,5
89,2
58
64 46
42,9
28
Built-in converter : 0-10 V DC output Applications : Industrial and domestic
Type Range Accuracy Protection casing Protection probe CodeZone -10 +40 °C -0.2 °C +1.2 °C IP30 89 750 150Ventilation duct -10 +40 °C -0.2 °C +1.9 °C IP65 IP30 89 750 151Outdoor -10 +40 °C -0.2 °C +1.2 °C IP65 89 750 152Remote/submersible probe -10 +150 °C -0.2 °C +1.2 °C IP65 IP67 89 750 153
-40 +20 °C -0.2°C +1.9°C IP65 IP67 89 750 155
Accessories Operating temperature (o C) Operating pressure (bar) CodeCopper protective sleeve -20 +100 10 89 750 146Stainless steel (316) protective sleeve
-20 +400 16 89 750 147
Heat transfer compound - - 18 373 112
Supply voltage 24 V DC (±10 %)Output 0 10 VDCTemperature coefficients Derating 0.01 % / °C of full scaleTemperature coefficients Offset 1.5 mV / °CAmbient temperature (°C) -10 +60Ambient humidity 5 95 % RHMaterial housing Self-extinguishing
89 750 150 89 750 151
B Ø3 mm for screw M3 x 8
C Cut-outs
D Fixing holes
E Bolt hole M3
F Maximum thickness 26 mm
Temperature sensors
Specifications
Accessories
General characteristics
Dimensions
80 mm
85 mm
85 m
m
70 mm
70 m
m
80 m
m
1
2
3
4 5
93 mm
32 mm
98 mm
150 mm
67 m
m
ø 6
mm
ø 74 mm
ø 4 mm
85 mm
29
89 750 152 89 750 153 and 89 750 155
Accessories for 89 750 153 and 89 750 155
B Screw M4
93 mm
32 mm
98 mm
67 m
m
ø 74 mm
85 mm
ø 4 mm
93 mm
32 mm
98 mm
ø 74 mm
ø 4 mm
85 mm
67 m
m
ø 6 mm
150
mm
1 m
30
Output voltage existance is indicated by a continuously lit LED. A flashing LED indicates autoprotection mode.
The output voltage can be adjusted from 100 to 120 % with a potentiometer in order to compensate for possible voltage drops.
Regulated, power surge and short circuit safe, the new switching power supplies easily fit into control panels.
Type Voltage Nominal power CodePS 12 V DC 22 W 88 950 300
24 V DC 30 W 88 950 301
Input voltage 100 240 V AC single phaseOutput voltage Adjustable between 100 à 120 %Technology Electronic with primary decouplingShort-circuit protection
Overload protection
Reset after overload automaticStatus indication Output LEDMounting DIN rail EN 50022Conformity to standards EN 50081-1
EN 50082-1CEI 61000-8-2CEI 950
Certifications CE, UL-CSA, TüV, CTick
PS
Power supply
Specifications
General characteristics
Dimensions
90 m
m10
0 m
m
90 m
m11
0 m
m
60 mm72 mm
51,6 mm 4 mm56,1 mm
66,6 mm
31
Removable connectors
Front panel adaptors
Interconnection cables
Programming tools
Enclosed version of Millenium II can be removed Positive wiring connection SET for SA 12 and SA 20 Removable screw terminal blocks
Type Designation CodeKD 12 Plug-in connector kit for SA12 88 950 310KD 20 Plug-in connector kit for SA20 88 950 311
Connection Removable screw terminal blockConnection capacity Cable diameter from 0.14 to 2.5 mm2 AWG22 - 12Max. current (A) 12
Millenium II+ panel mounting adaptor IP 67 waterproof panel adaptor
Type Designation CodeFront panel adaptor Front panel adaptor for EC12-SA12 89 750 103
Front panel adaptor for EC20-SA20-XT20-EX20 89 750 109Front panel adaptor Waterproof panel adaptor for SA12-EC12 89 750 160
Waterproof panel adaptor for SA20-XT20-EC20-EX20 89 750 161Waterproof panel adaptor for SA20-XT20-EC20-EX20 + 1 extension 89 750 162
Type Designation CodeProgramming cables Programming cable 9-pin D connector 88 950 102
USB adapter for programming cable 88 950 105Modem - Millenium II+ link 88 950 111
Type Designation CodeSoftware Programming software on CD ROM 88 950 100
Modem installation software 88 950 113Module EEPROM memory module 88 950 101
Accessories
Specifications
General characteristics
Specifications
Specifications
Specifications
Crouzetaround the world
AUSTRIACrouzet GmbHZweigniederlassung ÖsterreichSpengergasse 1/3A-1050 WIENTel. : +43(0) 1/36 85 471Fax : +43(0) 1/36 85 472E-mail : com-at@crouzet.comwww.crouzet.at
Crouzet DirectTel. : +49(0) 21 03/980 108Fax : +49(0)21 03/980 250E-mail : info-direkt@crouzet.com
BELGIUMCrouzet NV/SAKoning Albert I Laan 401780 WemmelTel. : +32 (0) 2 462 07 30Fax : +32 (0) 2 461 00 23E-mail : com-be@crouzet.comwww.crouzet.be
Crouzet DirectTel. : 078-150.525Fax : +32 (0) 2 461 00 23E-mail : com-be@crouzet.com
BRAZILCrouzet do Brasil LtdaRua Gal.Furtado Nascimento,740 - sl. 77 Alto de PinheirosCEP: 05465-070 São Paulo SP - BrasilTel. : (11) 3026 9008Fax : (11) 3026 9009E-mail : crz-infobrasil@crouzet.comwww.crouzet.com
Crouzet DirectTel. : +33 475 802 102Fax : +33 475 802 120E-mail : infocom@to.crouzet.com
CHINACrouzet AsiaDynasty Business Center,310-3F457 Wu Lu Mu Qi (N) RoadSHANGHAITel. : +(86-21) 62 49 09 10Fax +(86-21) 62 49 07 01E-mail : com-cn@crouzet.comwww.crouzet.com
Crouzet DirectTel. : +33 475 802 102Fax : +33 475 802 120E-mail : infocom@to.crouzet.com
FRANCECrouzet Automatismes SASVentes France2 rue du docteur Abel BP 59 - 26 902 Valencecedex 9Tel. : 04 75 44 88 44Fax N° Azur : 0 810 61 01 02E-mail : com-fr@crouzet.comwww.crouzet.fr
Crouzet DirectN° Indigo 0 825 33 33 50Fax : 04 75 80 21 20E-mail : infocom@to.crouzet.com
GERMANYCrouzet GmbHOtto-Hahn Str.3D-40721 HILDENPostfach 203D-40702 HILDENTel. : +49(0) 21 03/980-0Fax : +49(0)21 03/980-200E-mail : com-de@crouzet.comwww.crouzet.de
Crouzet DirectTel. : +49(0) 21 03/980 176/108Fax : +49(0) 21 03/980 250 E-mail : info-direkt@crouzet.com
INDIACrouzet IndiaIndia liaison officeUnit No. 3-D, “SPL ENDERLY” III Floor, 26, Cubbon roadBANGALORE 560 001Tel.: +91 80 309 02 245Fax: +91 80 512 38 066E-mail : crz_bangalore@crouzet.comwww.crouzet.com
Crouzet DirectTel. : +33 475 802 102Fax : +33 475 802 120E-mail : infocom@to.crouzet.com
ITALYCrouzet Componenti s.r.l.Via Brembo, 2320139 MilanoTel. : +39 02 57 306 611Fax : +39 02 57 306 723E-mail : com-it@crouzet.com
MEXICOCrouzet Mexicana SAAquiles Serdan n° 416San Felipe Hueyotlipan C.P.72030 - Puebla MexicoTel : +52 22 24 20 29/ 30Fax : +52 22 24 21 47E-mail : com-mx@crouzet.comwww.crouzet.com
Crouzet DirectTel. : +52 (55) 5804 5544/5Toll Free: 01 800 706 0600Fax : +52 (55) 5686 2710E-mail : customer.service@us.crouzet.com
SPAINCrouzet EspañaC/ Aragón 224 08011 BarcelonaTel. : +34 93 484 39 70Fax : +34 93 484 39 73E-mail : es-consultas@crouzet.eswww.crouzet.es
Crouzet DirectTel : +33 475 802 103Fax : +33 475 802 120E-mail : infocom@to.crouzet.com
SWEDENCrouzet ABMalmgårdsvägen 63Box 11183 - SE. 100 61StockholmTel. : +46-8 556 02 200Fax : +46-8 556 02 229E-mail : crouzet@crouzet.sewww.crouzet.se
Crouzet DirectTel. : +46-8-556 02 210Fax : +46-8 556 02 229E-mail : order@crouzet.se
SWITZERLANDCrouzet AGGewerbepark - Postfach 56CH-5506 MÄGENWILTel. : +41(0) 62/887 30 30Fax : +41(0) 62/887 30 40E-mail : com-ch@crouzet.comwww.crouzet.ch
Crouzet DirectTel. : +41(0) 62/887 30 30Fax : +41(0) 62/887 30 40 E-mail : info-direkt@crouzet.com
THE NETHERLANDSCrouzet BVIndustrieweg 172382 NR ZoeterwoudeTel. : +31 (0)71-581 20 30Fax : +31 (0)71-541 35 74E-mail : com-nl@crouzet.comwww.crouzet.nl
Crouzet DirectTel. : 0900-2768938Fax : +31 (0) 71 541 35 74E-mail : com-nl@crouzet.com
UNITED KINGDOMCrouzet LtdIntec 3 - Wade RoadBasingstoke - HampshireRG24 8NETel. : +44 (0)1256 318 900Fax : +44 (0)1256 318 901E-mail : info@crouzet.co.ukwww.crouzet.co.uk
USA/CANADACrouzet North America204 airline drive, suite 300Coppell Texas 75019Tel. : +1 972 471-2565Fax : +1 972 471-2560E-mail : sales.info@us.crouzet.comwww.crouzet-usa.com
Crouzet DirectTel.: 1 800 677 5311Fax : 1 800 677 3865E-mail : customer.service@us.crouzet.com
OTHER COUNTRIESCrouzet Automatismes SASDivision Ventes Internationales2 rue du docteur Abel - BP 5926902 Valence cedex 9 - FrTel. : +33 475 448 936Fax : +33 475 448 126E-mail : com-dvi@crouzet.comwww.crouzet.com
Crouzet DirectTel. : +33 475 802 102Fax : +33 475 802 120E-mail : infocom@to.crouzet.com
Warning:The product information contained in thiscatalogue is given purely as information anddoes not constitute a representation,warrantly or any form of contractualcommitment. CROUZET Automatismes andits subsidiaries reserve the right to modifytheir products without notice. It is imperativethat we should be consulted over anyparticular use or application of our productsand it is the responsability of the buyer toestablish, particularly through all theappropriate tests, that the product is suitablefor the use or application.Under nocircumstances will our warranty apply, norshall we be held responsible for anyapplication (such as any modification,addition, deletion, use in conjunction withother electrical or electronic components,circuits or assemblies, or any otherunsuitable material or substance) which hasnot been expressly agreed by us prior to thesale of our products.
Distributed by :
www.crouzet.com Ref
.67
191
03 G
(Pu
blis
hed
Nov
emb
er 2
004)
- C
omm
unic
atio
n C
rouz
etA
utom
atis
mes
- D
épot
léga
l en
cour
s -
Pei
llon
& A
ssoc
iés
- 3C
Evo
lutio
n -
Pho
tos
:Gin
ko -
Dan
iel L
atta
rd