Post on 10-Jan-2017
Company Profile
• Megaroller has been in existence for 30 years.
• 12,000m2 Factory based in Brits.• Specialize in HDPE rollers because of their
superior characteristics.
Company Profile
• South Africa we distribute via Network of National distributors.
• Sub-Factories in Australia and Chile.• Distributors/Agents in Canada, Europe and
Central America.
Products
• Megaroller strives to develop and produce products that meet the following criteria:• Lower Cost of Ownership• Belt Friendly• Quality offering• Improves Efficiency
• Pioneered HDPE rollers 30 years ago.• Our Premium Product• Internationally renowned for the quality of our HDPE
rollers• Carries 3 patents:• Seals – virtually contaminant free operation• Welded Plastic Housing – better seal and less risk of
splitting open• Manufacturing equipment for above
ProductsHDPE Rollers
Benefits:• More efficient conveyor system because:
• Lighter than Steel• Easier Running• Low Run Out
• Better Bearing alignment results in:• Reduced stress and wear• Longer lifespan• Quieter operation = less noise pollution + healthier work environment
• Unique bearing carrier absorbs vibration• Safer handling compared to Steel.
ProductsHDPE Rollers
• Options:Standard Anti-Seize Anti-Runback
Shaft Variations Open, Closed ended, Stainless SteelShaft Machining Stub, Garland, Extended, Threaded, Series 2000, Hexagon HeadBearing Options NSK, SKF, URB, In-HouseSpecial Options Links, Short Bodies, Long Bodies
ProductsHDPE Rollers
Steel Body RollerHDPE Housings that are pressed into the Roller Body.
ProductsHybrid Rollers
Benefits:• More efficient conveyor system because easier running than
conventional steel• Better Bearing alignment results in:
• Reduced stress and wear• Longer lifespan• Quieter operation = less noise pollution + healthier work
environment• Unique bearing carrier absorbs vibration• Less Expensive than HDPE
ProductsHybrid Rollers
• Options:Standard Anti-Static Anti-Runback
Shaft Variations Open, Closed ended, Stainless SteelShaft Machining Stub, Garland, Extended, Threaded, Series 2000, Hexagon HeadBearing Options NSK, SKF, URB, In-HouseSpecial Options Links, Short Bodies, Long Bodies
ProductsHybrid Rollers
• Steel Body Roller with• HDPE Housings that are pressed into the
Roller Body; or• Steel Housings that are welded in
• Steel Bodies are covered with Rubber Rings to absorb impact at load/transfer points on the conveyor.
ProductsImpact Rollers
Benefits:• HDPE housings offer Better Bearing alignment resulting
in:• Easier running, more efficient conveyor• Longer lifespan• Quieter operation
• Unique bearing carrier absorbs vibration• Rubber offers protection to bearing and roller from
impact of material being dropped onto belt.
ProductsImpact Rollers
• Options:Standard
Shaft Variations Open, Closed ended, Stainless SteelShaft Machining Stub, Garland, Extended, Threaded, Series 2000, Hexagon HeadBearing Options NSK, SKF, URB, In-HouseSpecial Options Links, Short Bodies, Long Bodies
ProductsImpact Rollers
• Patented All Steel Roller• No Welding of Bearing Housing to Roller
Body• Bearing Housing is mechanically fixed in
place• Curved Edge is more belt friendly
NEW!ProductsSteel Rollers
NEW!
Benefits:• More efficient conveyor system because easier running than
conventional steel• Better Bearing alignment results in:
• Reduced stress and wear• Longer lifespan• Quieter operation = less noise pollution + healthier work environment
• Unique bearing carrier absorbs vibration• Competitively Priced• Low Acquisition Price Point + reduced total cost of ownership• Labyrinth Seal System
ProductsSteel Rollers
NEW!
Options:• Anti-Run Back• 127 & 152 Roll Diameter• 25 & 30 Series Shaft• Upto 1918mm Face Length
ProductsSteel Rollers
QuotesImportant Info Needed
QuotesImportant Info Needed
• Type of Roller• HDPE• Hybrid• Rubber Impact• Steel
• Variation of above• Standard (bi-directional roller)• Anti-Runback (one way roller)• Anti-Seize (static flinger)• Scale Roller (Additional Machining for concentricity and balance)
QuotesImportant Info Needed
• Other options• Open or Closed Ended or other shaft finishing• Stainless Steel Shaft• Shaft Machining• Bearing Preference
• Sketches provided by user are always safest option for client and manufacturer
• If not available we have diagrams that can be provided for completion by user
• More info means:• More accurate quotes• Less delays/costs due to mistakes = quicker delivery times
ProductsMulti Steer Steering Frames
NEW!
• Designed for Hostile Mine Environments• Pivots and Tilts• Mechanism is greased and sealed for life• Tried & Tested in the field• Prevents belt misalignment without need for side guide
rollers which can be belt unfriendly• Prevent Material Spillage• Belt Friendly Design• 3 Roll, 5 Roll, V-Return and Flat-return available
ProductsRoller Frames
NEW!
• Belt Friendly Tubular Frames now available• Angle Iron frames made to order • Flat Return, V-Return, 3 Roll and 5 Roll configurations• Painted & Galvanized options available