Post on 26-Dec-2021
T. 787-625-1818
www.tech-dist.com
Mechanical, Electrical & Telecommunication Equipment
Technical Distributors, Inc. is considered one of Puerto Rico’s fastest growing single source supplier of heating, venti-
lating and air conditioning (HVAC), electrical, industrial, communication and computer room products. Since 1979, we
have been dedicating our efforts in providing the electrical and mechanical equipment requested by our customers. The
commitment to quality, superior products and service, as well as technical excellence and the dedication to doing more
than expected, have contributed to our fast and stable growth.
The company provides products such as boilers, double contained pipes, steam products, pumps, ventilators, fan coils,
energy recovery units, as well as kitchen hoods, dust collectors, water heat-
ers, air distribution equipment, dampers, electric generators, louvers, fre-
quency drives, heat transfer packages, and all this fits pharmaceutical plants,
heavy and light industrial manufacturing, commercial buildings, colleges and
universities, government buildings, restaurants, hospitals, and other health
care institutions.
Foreseeing the need for adequate maintenance and service for the products
we distributed, is why Technical Maintenance & Service Corp. was also
founded in 1979. The company’s service capabilities include a team of factory-
trained service technicians who are able to work on all the brands of equipments
that it distributes.
The third company, Technical Power Services, Inc. was established in 1989, to
provide customers with the best electrical and electronical service and mainte-
nance in Uninterruptible Power Supplies (UPS). Specialized in serving commercial,
industrial and institutional customers’ electrical needs, by preparing hospitals’ MRI
rooms and telecommunications business with environmental control units, UPS
systems (on a 24-7 basis), power conditioning, surge suppressors, process chillers and most recently, the acquisition of
gen-sets.
Last but not least is Technical Network Power, Inc., launched on 2006
and counts with great growth expectations. Technical Network Power, Inc.
(TNP) represents and distributes controls equipment through the KMC Con-
trols brand. TNP can not only offer the controls components, but it also pro-
vides the full service where the design, implementation, installation and pro-
gramming of controls are considered assuring a complete and cohesive web.
That’s why we can assure the best possible coordination between the four
companies’ technical personnel, to provide customers with the best product and service under the same management
structure.
We believe that our products are as much important as the service we offer. That’s why we are focused on continuously
offering our customers a high quality product and service to meet or exceed their expectations and desires at a price they
can afford.
2
Air Distribution Equipment
Coils
Computer Room Support
Condensate Return Unit
Condensate Valves
Controls
Cooling Tower Filtering System
Cooling Towers
Dampers
Domestic Water Systems
Double Containment Pipes
Dust Collectors
Electrical Generators
Energy Recovery Units
Environmental Protection
Fans – Kitchen
Fans – Laboratory
Fans (all types)
Filter Housing
Filters (HVAC)
FRP Ventilation Ducts
FRP
Fume Exhaust System
Heat Transfer Packages
Hydronic Specialties
HVAC
Insulation Products
Kitchen Hoods
Leak Detection Systems
Louvers
Odor Control Systems
Paint Booths
Power Protection
Pre-Insulated Piping Systems
Pressure Indicators
Pressure Red Valves
Pump Accessories
Pumps
Raised Floors
Sheet Metal Accessories
Sound Attenuators
Steam Control Valves
Transfer Switch
Variable Frequency Drives
Water Heaters
index
70M-MS Multi-Stage Pressure Booster
All Piping is Non-Ferrous with Type 304 Stainless Steel Headers
Full Factory Performance Test at Rated Flow & Head
Duplex and Triplex Configurations
Vertical Multi-Stage Pumps
Vertical Pump Configuration Minimizes Footprint
Features:
Solid State Control Panel
User-Friendly Operator Interface
Factory Assembled Pressure Booster System
Energy Management System Interface
The ITSC option makes it easy to design, install, and commission a variable flow
Hydronic Pumping System. Available from Bell & Gossett® on both Series 80
closed-coupled and Series 80-SC split-coupled vertical in-line pumps, the Inte-
grated Technologic variable frequency drive combines the energy savings of varia-
ble flow with sensorless technology to eliminate the cost and time of using wired
transducers.
Series 80 & 80 SC Sensorless with ITSC option
The e-90 is a close-coupled centrifugal in-line pump designed for the commercial
HVAC market. The e-90 offers excellent efficiency for energy savings. The e-90
can be installed in either horizontal or vertical applications. The new robust EPR/
Carbon/ Silicon Carbide mechanical seal lowers maintenance and increases the
life of the pump. This pump is rated for 250°F and 175 PSI and is perfect for
chilled water loops or heating water loops in commercial hydronic systems.
Series e-90 Closed Coupled In Line Centrifugal Pumps
3
4
At Bell & Gossett, we have over 88 years of experience in designing pumps. New VSX Double-Suction Split-Case Pump has Maintenance-Free Bearings, new One-Piece Unitized Seal, Groutless Base Plate, Align-ment-Friendly Coupling, reduced pump room footprint by up to 40% when compared to traditional split-case and vertical inline pumps.
Using CFD technology, we can deliver identical performance in any flange configuration. The result is that you can maximize your piping pos-sibilities and meet a broad hydraulic range for chillers, towers, distributive and general pumping requirements.
Bell & Gossett has redesigned the complete line of its best-in-class 1510
pump – now called the e-1510 – to provide the highest overall efficiency in
the end-suction market for HVAC and plumbing applications. With the
largest Efficiency Island compared to other similar pumps, the e-1510 re-
duces electricity consumption, improves overall system performance and
lowers life cycle costs.
Base mounted end suction pumps
End suction, close-coupled, foot-mounted pump available in 1-1/4” through 6” sizes. Motor size 3/4 to 50 HP at 1750 RPM, 2 to 60 HP at 3500 RPM. Available in bronze-fitted and all-iron construction with flows to 2300 GPM, heads to 400 feet. Close-coupled, space-saving economy plus rugged construction make the Series 1531 an ideal selection for a variety of hori-zontal and vertical mount applications. Available with the B&G standard self-flushing Carbon/Ceramic mechanical seal in 175# working pressure design.
Closed coupled end suction pumps
Double suction split case pumps
5
Under ITT Industries, is McDonnell & Miller, which provides the best performing boiler and level control products for residen-
tial, commercial and industrial HVAC industry.
McDonnell & Miller pioneered automatic regulation of boiler water levels and has been
responsible for practically every major development in boiler control.
Float-activated switches control the boiler feed pump and provide low-water cutoff and
alarm. Electronic probe controls help protect the boiler by interrupting electrical service
to the burner in the event of a low water condition. Boiler water feeder cutoff combina-
tions provide dual protection by adding water (mechanically) to maintain a minimum water
level and by stopping the firing device (electrically) in emergencies.
Boiler Control
Flow Switches
Hoffman Specialty offers a complete line of steam products, including steam traps, valves for
steam and water, vacuum breakers, pressure and temperature regulators—all with a wide range of
capacities and options for virtually every type of system control.
Regulators
Watchman Pumps feature durable lightweight steel or corrosion-resistant cast iron receivers. Domestic Pump is synonymous
with quality, durability and fuel-saving economy in condensate equipment.
Condensate Units
For the commercial market Greenheck Centrifugal Fans are providing sup-
ply, exhaust and return air in hospitals, schools, stores and large office build-
ings.
Greenheck industrial duty fans handle applications like filtration systems,
fume exhaust, fluid pressurization, combustion air, and material handling, as
well as supply and exhaust. Many of these applications are in corrosive and
abrasive high temperature on high pressure environments.
Dampers
Louvers
Florida product approved
Architectural louvers, combination louver dampers, custom louvered penthous-
es, architectural equipment screens and brick vents are offered in a wide range
of blade types including J, K, sight proof, drainable, dual drainable, hidden mulli-
on, stationary and adjustable designs.
Florida Product Approved louvers are designed to meet the Florida Building
Code and should be applied where high wind-load requirements are specified
outside of Florida’s High Velocity Hurricane Zone or in any location where im-
pact requirements and high wind load requirements are specified.
Greenheck offers the most UL certified dampers and the largest selection of
AMCA-licensed dampers in the industry. Our state-of-the-art testing facility al-
lows us to regularly test our products to ensure quality performance is main-
tained. With in-house testing capabilities, we are able to accelerate new product
development concepts that meet the challenging demands of the ever changing
market place.
Louvers
A complete line of Centrifugal Fans for both commercial
HVAC and industrial applications.
The High Plume Dilution Blower is a self-contained exhaust system for hospital,
pharmaceutical, university, biotech and other laboratory applications. The Vektor-
MD employs a unique discharge nozzle design that entrains additional ambient air
to mix with the potentially hazardous exhaust fumes.
The additional air dilutes the lab effluent and increases the discharge flow and ve-
locity, displacing the exhaust high above the roof and away from building makeup
air systems—without the need for unsightly exhaust stacks. Vektor’s mixed-flow
impeller is available in either AMCA type “C” or type “B” spark resistant
construction, for laboratories that also may exhaust flammable and explo-
sive solvent vapors. The Vektor-MD laboratory exhaust system is applica-
ble to constant or variable volume facilities
Laboratory Exhaust System
Dampers
6
Greenheck specializes in manufacturing competitively priced, quality engineered
replacement and OEM coils. Every coil we build is leak tested with 450 PSIG of
dry nitrogen to guarantee 100% quality assurance. And just to be sure you get
the performance you expect, our coils are tested in accordance with AHRI
Standand-410-2001. Coils are constructed with copper tubes in 5/8, 1/2 or 3/8
inch outside diameter (OD), aluminum or copper fins, and galvanized, stainless
steel, or copper casings. Insulated coil sections, stainless steel drain pans, and
protective coatings are also available
Greenheck Coils
7
Type I Wall Canopy
Grease Exhaust Hoods
Type I Single Island
Style(V-Bank) Canopy
Hoods Grease Exhaust
Hoods
Type I Proximity
(Backshelf) Grease
Exhaust Hood
Type II Heat and
Condensate Hoods
Grease Extraction
Controls/Energy
Management
Roof Upblast and
Sidewall Exhaust Fans
Kitchen Ventilation Systems
All the components available from one source. From kitchen hoods, to fire suppression systems, to utility distri-
bution systems, to fans, to makeup air units. Greenheck is unique as a supplier of complete Kitchen Ventilation
Systems. Not only do we manufacture hoods, fans, and make-up air packages, but we engineer them to work
together as a complete system.
Rooftop with Cooling
Pollution Control
Units Energy Recovery Ventilators
8
CertainTeed, a leading manufacturer of fiber glass insulation, produces insula-
tion products with all the thermal, acoustical and energy-saving features you
need.
All CertainTeed fiber glass insulation products are made with the highest quality
standards in the industry. CertainTeed fiber glass insulation products are right for
you and your environment.
What makes RIZE Enterprises the fastest growing manufacturer of cable joiners and suspen-
sion systems in the lighting, electrical and retail industries is our revolutionary Kwik-Loc method
can be used as a fast and reliable way to suspend lighting, HIDs, cable basket, busway, AV equip-
ment, signage and more. The inherent time saving qualities of the Kwik-Loc system have been
shown to increase productivity by up to six times compared to traditional hanging methods
IEC is the industry leader in hydronic fan coil solutions.
In addition to the most comprehensive standard product
offering available, we have the ability to adapt our design
and manufacturing processes to deliver the perfect solu-
tion to your specific needs. Put your project into our
hands, and build your reputation on ours.
Modular Hi-Rise Series Six basic models with multiple configurations
for concealed or exposed applications.
Sizes from 300-2000 CFM
Single and DITTO® units
Horizontal Series Six styles for concealed or exposed ceiling
applications
Seven sizes from 200-1200 CFM
With and without return-air plenums
IBC Seismic Certification
Vertical Series Floor mounted for concealed or exposed
applications
Seven sizes from 200-1200 CFM
Lowboy units
Wall recessed units
Hi-Performance Series For concealed or exposed applications
Eight sizes from 600-2000CFM
Horizontal and vertical configuration
IBC Seismic Certification
Belt Drive Series For hydronic and DX applications
Eight sizes from 600-4000 CFM
Horizontal and vertical configuration
Single and double wall construction
IBC and OSHPD Seismic Certification
9
10
CLARCOR Air Filtration Products, Inc. (CLC Air) was founded in 1964 and manufactures HVAC filtration products
under the Airguard brand name. Since its founding, the Airguard brand of air filtration products has been providing the world
with “Innovative Clean Air Solutions.” Airguard products are manufactured in state of the art facilities operating under the
highest quality standards. Airguard offers its customer base quick delivery at low delivered costs. Airguard products can be
found everywhere, in commercial buildings and office complexes, industrial plants, healthcare facilities, schools and universi-
ties and public and government buildings.
Dirty water is your cooling system's worst enemy. It fouls equip-
ment, robs heat transfer efficiency, drives up energy consumption,
accelerates chemical consumption, aggravates equipment mainte-
nance and downtime and shortens equipment life. Tower-Flo®
Water Filter Systems are designed to continuously remove sus-
pended solids form cooling water. These complete side stream
filter plants include strainer, pump, motor, face piping, valves, auto-
matic backwash controls, filter vessel and media, all skid mounted.
To get more performance out of your cooling system for less cost, get the dirt out with a
Tower-Flo® Water Filter Systems
Counter Flow Type Counter Flow Type
Cross Flow Type Closed Circuit Type
W ith more than 30 years of experience in the cooling tower industry, MESAN has kept up with the latest technology
and continuously improves the standard of performance and service. MESAN series have been certified by the cooling tech-
nology institute (CTI) in accordance with CTI standard STD-201. They are design to meet today’s environmental concern,
energy efficient and minimize the maintenance requirements. High quality materials FRP tower body and the steel components
are Hot Dip Galvanized to minimize rusting and corrosion. PVC water distribution system with high efficiency non-clogging
large orifice removable nozzles for efficient water coverage.
Cooling Towers
11
12
Titus is the leading manufacturer for commercial HVAC industry of:
Grilles
Registers
Fan Coils
Diffusers
Architects, engineers and contractors have been selecting Titus as their supplier
of air distribution products since years.
Critical Environment
Helios is a brand new line of digital powered by ambient light. It automatically
delivers just the right amount of warm or cool air using a unique digital logic
system for more accurate temperature brands. Feel the difference in your com-
fort, see the difference in your energy bills.
FEATURES AND BENEFITS
· Utilizes EnOcean's™ wireless technology
· Uses ambient light energy for self-powering capability
· Requires no building power
· Installation is simple and easy
· Requires no complicated cabling or wiring
· 3 week power storage capability
Titus brings both accuracy and flexibility to the variable air volume
(VAV) market with T3SQ VAV diffusers. The T3SQ combines the func-
tions of a VAV terminal and a high performance diffuser in one. The
T3SQ modulates the air volume delivered to a zone to accurately con-
trol cooling and heating conditions.
T he SC “Smart” diffuser is a single function device. It is powered by a single thermostatic actuator to provide
VAV room temperature control for cooling. As room temperature increases above its set-point thermal actuator
# 3 will sense and respond to the induced room air temperature. The thermal actuator will react to the warming
room temperature by extending an internal piston allowing the diffusion disc to open. The increased diffusion area
allows more cool supply air to be delivered into the room. As the room temperature decreases the opening of the
diffusion disc is reduced until the room temperature reaches the desired set-point.
Side Access Carbon Housings
Front Access Carbon Modules
Coconut Shell Carbon Trays
Potassium Permanganate Trays
Bulk Media & Specialty Trays
Bulk Media & Specialty Trays
Air Purification Equipment
Carbon Housing
Flat Bank Housings
V-Bank Housings
Side Access Housings
Filter Lock Housings
Efficiencies from 20% to 95%
Air Filtration Equipment
Side Access Housing
BIO Housing
13
W ith over 30 years of experience, professionals have
made ISLIP Flow Controls their number one choice for
Strainers, Valves and Pipeline Accessories.
Design Features:
IFC manufactures & stocks a full line of Strainers, Valves and Pipeline Accessories.
All IFC products are manufactured and tested to ASME and CSA standards.
Most product lines are available in sizes up to 60” in diameter and pressures up to 10, 000 PSIG.
Materials include: cast and ductile iron, bronze, carbon steel and stainless steel in pressure classes 125 lb through
1500 lb.
For extreme and special operating conditions, products manufactured from special alloys can also be supplied.
14
C42 Fixed Amperage Non inverter chassis in 20amp and 30amp fixed cord
Configuration of 15,000btu
i42 Inverter Modulating inverter chassis for quiet industry leading efficiency
Modulating range from 9,300btu to 17,000btu
Easy to configure
Highest Efficiency
Incredibly Quiet
Consistent dehumification
Tech
no
log
y o
pti
on
s
PERMA-PIPE/RICWIL’s years of experience has allowed to design and
engineer industrial and environmental piping systems to safely transport a wide
variety of liquids both hazardous and no hazardous.
Each system is designed to provide an economical and efficient way to meet our
clients exacting standards and help them comply with all federal, state and local
requirements.
Because PERMA-PIPE capabilities are not material specific, all of our factory
manufactured piping products are designed to address specific client applications.
PERMA-PIPE offers the appropriate solution for your project, whether it re-
quires a piping system for steam, hot water, fuel, process chemicals, process sew-
ers, lethal service chemicals, nuclear waste, landfill leach ate or other liquids.
Backed by over 50 years of design experience
Prefabricated to job site dimensions
Supplied with a part drawing layout indicating where each piece is
installed by the contractor
Optional leak detection/location system
Optional heat tracing systems
PAL-AT is a state of the art microprocessor
based leak detection cable system that locates
potential problems anywhere along the sensing
cable and alarms on contact. The PAL-AT can be
furnished for secondary contained pipe systems,
heat distribution systems, computer room sub-
floors, clean rooms, phone switching stations or
anywhere quick and pre-
cise leak detection is re-
quired. As an option we
can provide remote moni-
toring of the system using
our PALCOM software
package.
POLYTHERM® Cryogenic Piping is a fiberglass jacketed,
polyurethane foam insulated piping system for above and be-
lowground distribution of liquids from -100ºF to -320ºF (-
196ºC).
Wadell Engineering Company has been assisting clients in meeting their goals,
with the ability to measure & control airflow accurately & repetitively. These air
flow control products include the WPD, pneumatic damper - airflow control valve,
differential pressure sensor, thermal mass flow sensor, airfoil blade damper and
many other specialty assemblies.
15
16
The Rawal APR Control provides continuous capacity modulation for all sizes
and configurations of air conditioning systems. By matching system capacity
to continuously changing load conditions, the APR Control-enhanced system
is able to maintain better comfort conditions, as well as provide a number of
unique solutions that standard air conditioning systems (usually below 100
tons) are unable to achieve.
Actuators for HVAC systems. Belimo has
been designing, manufacturing and marketing elec-
tric actuators for motorized control devices in
heating, ventilating and air-conditioning systems
since 1975. The company’s innovative, high-class
technology ensures troublefree operation for all
kinds of HVAC control devices. This not only
means greater comfort and convenience, of
course, but also greater safety for property and
the occupants of buildings.
Economy plus ecology. Belimo products are
helping to improve the economic performance of
all kinds of HVAC plant and equipment. The sim-
ple, well-thought-out designs of the company’s
long-life actuators, made of top-quality materials,
greatly reduce the cost of installation and upkeep.
Their excellent functionality and precision allow
HVAC systems to achieve optimum performance
and so reduce power consumption.
Blue Ribbon began by becoming a direct distr ibutor of gauges and ther mome-ters to satisfy the needs of OEMs, which required high volumes of low cost quality products. Blue Ribbon have combined knowledge and experience with industry demands to produce quality products with competitive pricing.
USA Coil & Air Units can be installed as a basic unit where you pull the air in from
the space where the unit is installed. You can also install the unit as a fully ducted
return unit and duct in and out. USA Coil & Air Vertical units are designed for hos-
pitals applications.
Other applications include:
Spot cooling and/or heating
Perimeter cooling and/or heating
Space cooling and/or heating
Offices, schools, hospitals, rooms, residences, apartments or general use.
Special Note
USA Coil & Air Horizontal Units can be used for exposed applications. The cabinet is sufficiently attractive that there is no
problem in exposing the unit. Our coil connections and drain connections come out the side of the unit however, and spe-
cial cafe must be given to covering the piping and wiring, if that is a consideration.
O ur complete line of WHD, XHD and XVD Fan/Coil units continues the USA Coil &
Air tradition of stocking units that set the industry standard for quality and value. You can
order your choice of “horizontal” or “vertical” units with chilled water or DX cooling. You
can operate your unit as a 2 pipe system and use the water cooling coil as a heating coil or
operate as a 4 pipe system and add a separate hot water coil. Whatever you choose, you can
order it out of stock from USA Coil & Air.
17
Innovent Air Handling Equipment
Meeting unique challenges with cost-effective solutions has made Innovent an industry leader in the design of large,
heavy-duty air handling systems for critical environments. Our engineers and sales representatives work closely with
you to evaluate your specific heating, cooling and air-quality requirements and then custom design a one-of-a-kind, en-
ergy-efficient, dependable system to handle up to 200,000 cfm.
Options include 100-percent outside air, gas heating, evaporative cooling, chilled-water and DX cooling, packaged re-
frigeration, electric heat, all-aluminum housings or other special casing construction, sectionalized equipment, “knock-
down” field-assembled units, and direct-match replacement designs, including existing multizone units. Factory perfor-
mance testing is available (casing leakage, panel deflection, airflow verification, basin leakage and sound verification) to
ensure a premium quality unit is supplied and capable of delivering exactly what was specified.
Developing Custom Air Handling Solutions
18
Commercial Aire Products™ manufacturers IAQ double wall Belt Drive air handling products. Units are double wall,
post and panel design, and constructed from heavy gauge galvanized steel. Motors and blowers are base mounted on
rubber isolators. All access panels are standard with full perimeter rubber gaskets and are certified for less than 2% air
leakage. Sizes range from 400 cfm to 9,000 cfm (up to 12,000 cfm on roof-mount) and include horizontal, vertical, mod-
ular and roof-mount configurations. Units are available in chilled water or direct expansion, with heating options of hot
water, steam and electric heat. Units will accept up to 10 rows of coil without modification. A wide range of options
are available including face and bypass dampers, anti-microbial inner liner coatings, E-DuraFin™ corrosion
protection for coils and cabinets, mixing boxes, air blenders, and angular filter sections. Motor and heater voltages are
available in three phase, 208/230/480V and single phase, 115/230V and 277V.
CPC 15-25 Ton Commercial Air Conditioner
Provide energy-efficient cooling performance in one self-
contained unit. This unit is suitable for ground level or roof-
top installations and horizontal or downflow applications. Spe-
cial Features:
R-410 chlorine free refrigerant
High efficiency scroll compressor
Copper tube / aluminum fin coils
Easy to service
Contactor with lugs
Heavy gauge galvanized steel cabinet
UV resistant powder paint finish
AHRI certified; ETL listed
19
MS Mini-Splits are economical to install and provide cooling
and heating with the convenience of a remote control. Best of
all, it turn the system off when you leave to save money on ener-
gy bills. Special Features are:
DC Inverter
Twin Rotary Compressor
Indoor antibacterial fan
Odor capture carbon filter
Inverter Condensing Unit
Is a High Efficiency unit with variable speed compressor, which includes:
Up to 24.5 SEER
Energy Star rated
ComfortNet compatible
Advanced diagnostics
Lifetime unit replacement limited warranty - Registration
Required
10 years parts limited warranty - Registration Required
Assembled in the USA
Col-Met makes paint spray booths and related products for all sorts of
applications. Products provide a cleaner, safer and functionally opti-
mized workplace. They control overspray efficiently, reduce prep time
significantly, and as an added bonus, each arrives at your dock with all
the hardware, filters and sealants required for installation.
Cemline Corporation® has manufactured tanks, pressure ves-
sels, packaged water heaters, unfired clean steam generators, and
replacement tube bundles to suit customer requirements. Our
products are used for the storing and heating of water and liquids
in plumbing and heating systems and industrial processes.
20
Flushing Bypass Valve Kit consists of two Union Tees and a
Model BB Union End Ball Valve with dual access ports. The BB’s
Memory Stop allows Valve Handle to be locked in the closed posi-
tion after flushing with a single screw adjustments. It’s Ball Valve
has a chrome plated ball with Teflon seats, blowout proof Stem
with double EPDM O ring seals.
Developed for industrial settings containing caustic chemi-
cals, ChemSox are manufactured out of HDPE with spe-
cialized thread and attachments that are built to hold up to
common chemicals such as Hydrochloric Acid, Sodium
Acid Sulfate, or Isopropanol. In addition, ChemSox are
UL Classified.
Commercial and industrial kitchens require high volumes of
supply airflow with minimal drafts for nearby exhaust hoods
and equipment. With conventional diffusers, there are many
common problems that can affect employee comfort and food
safety. KitchenSox products offer commercial kitchens the
answer. They eliminate drafts and condensation. They include
an active antimicrobial treatment and can be easily removed
for laundering.
LabSox Products are “Fabric” Air Dispersion Devices
designed for laboratory environments (Vivariums, Pharma-
ceutical, Research Education, etc.) in critical applications
commonly associated with a fume hood or other airflow
sensitive equipment (scales, laser, microscope, etc).
P ersonalize your DuctSox fabric air dispersion system with a logo, school name, company name, or slogan! Our
own PrintShop technicians can help you customize your DuctSox with FULL color images, block lettering, fancy let-
tering, custom designed logos…you name it! Our imaging process produces incredibly sharp images that are un-
matched by typical screen printing!
21
DataSox is the first directionally adjustable air displace-
ment system for the data center industry. The air displace-
ment portion of the DataSox places large volumes of air
within the cold aisle with low velocity while the adjustability
allows for higher wattage server targeting. Minimal hot air
entrainment is achieved, eliminating or reducing the need for
physical containment structures, while lowering construction
costs and getting better PUE (Power Usage Effectiveness)
ratings.
Dunham-Bush has focused on innovative products development. Today, we provide
a full potfolio of HVAC/R products from Fan Coil Units to large centrifugal
chillers as well as many other innovative green solutions. Our commitment to in-
novative, matched with an aggressive attitude toward growth, makes Dunham-Bush
a leader in global markets. Our product developments tailored to meet the specif-
ic needs of customers, building by building, country by country and region by re-
gion.
Air Cooled Horizontal Screw Flooded Compressor Chiller
AHRI certified & ETL listed
Capacity range from 77 to 557TR
Rugged design
Copper and Aluminum Coil
Magnetic Bearing Centrifugal Chiller
AHRI certified & ETL listed
Capacity range from 90 to 800RT (316 to
2814kW)
Inverter Driven Dual-Stage Compressor
Low noise with compact foot print
R134a
Air Cooled D/X Condensing Units
Capacity range from 60 to 1360 MBH
Rugged design
Scroll Compressors
22
Central Station Air Handler (CS3) The new extruded aluminum frame profile,
Modular Air Handling Unit is designed to pro-
vide the flexibility to meet the rising demand of
indoor air quality. The unit is designed with aes-
thetic and clean line finished that surpassed the
market needs.
Roof Mounted Air Handler (RT) Dunham-Bush Rooftop Air Handlers are de-
signed, engineered and manufactured specifically
for rooftop installation to save precious building
space and reduce installation costs.
Variable Speed Air Cooled Screw Chiller
AVX-B Series
* Inverter Driven Compressor
* Cooling Capacity from 115 to 470RT
* High Efficiency Screw Chiller
* Advanced Microprocessor Controller
* Unique Low Noise Control Design
* AHRI Certified
* R134a
Air Cooled Packaged Units
Capacity range from 30 to 1360 MBH
Multiple Scroll Compressors
High Efficiency plate heat exchanger
AHRI / ETL Certified (60Hz only)
23
For more than 85 years, General Tools has been the recognized industry leader for specialty hand tools. From professional contractors to weekend hobbyists, our customers know that General offers one of the largest assortments of niche-specific hand tools anywhere on the web. When you have a specific job or need in mind, chances are you'll find the proper Plumb-ing, Woodworking or Specialty tool right here at General.
24
The high-tech side of General Tools features more than 500 electronic test instruments, made with industrial-grade compo-nents for accuracy both in the field and around the home. We offer state-of-the-art solutions for HVAC, sports medicine, agriculture, weather analysis, building maintenance and much more. For nearly a century, General Tools & Instruments has produced some of the most inventive and well-received hand tool designs in the world. Along with our Test Instruments, we also offer a wide variety of& HVAC Tools and Measuring Tools.
CPS tools are designed to help you work smarter—and to get more done—quicker. And while everybody wants to be
innovative, few launch as many new products each year or can use patent pending as a descriptor as often. So you get
American engineered tools and equipment—at a reasonable pricing. Use your hands or use your head, CPS design for
both.
25
Powerful airflow - rated up to 900 CFM
Provides 6 ACH @ 6,000-8,000 ft³
True HEPA filtration - 99.97% efficiency @ 0.3 microns or higher
Low Power Consumption - Use less than 3.5 amps @ 120VAC
Flexible Operation - Can operate in the upright or horizontal position
PR
ED
75
0
PR
ED
12
00
The Best & Most Mobile HEPA Filtration Device in it’s Class
200-750 cfm, Variable Speed Airflow
Powerful - Provides 6 air changes per hour @ 5,000-6,000 ft³
Portable and Incredibly Lightweight (35 pounds with filters)
User-Friendly Controls and Secure Stacking
Peak airflow of up to 750 cfm—up to 50% more than the competition
Duro Dyne is the nation’s leading manufacturer of sheet metals accessories and equipment for the
heating, ventilating, and air conditioning industry. Duro Dyne’s extensive research and development
program has introduced more new products and processes than any other company in our field. Such
things as Flexible Duct Connector, as we know it today, as well as Vane Rail and Blade Kits for multi-
blade dampers were originally developed and patented by Duro Dyne Corporation. Other products
that have now become standards in the sheet metal fabrication field were developed by Duro Dyne
Corporation as well. In the fastening field Duro Dyne introduced the concept of self-drilling sheet
metal screws. Quieturn Turning Vanes and Glasline Hardware for fiberglass duct systems all were
originated by Duro Dyne.
Mon-Eco Industries has been manufacturing adhesives, sealants, mas-
tics and coatings since 1980. We carry a complete line of water-based
and solvent - based products. These products are manufactured for the
following industry groups:
HVAC - Sealants & Adhesives
Thermal Insulation - Mastics & Coatings
Asbestos Abatement - Coatings
Adhesives
26
Monoxivent offers a complete line of source capture equipment to facilitate a full-range of applications in reference to
vehicle and welding/fume exhaust elimination. Monoxivent also offers an extensive range of custom fabrication capabilities.
27
Corrosion Composites, by Monoxivent, is the leading source for corrosion resistant fiberglass rein-
forced plastic (FRP) fabrication. Our FRP products are used in many industrial, water, wastewater, un-
derground, industrial/commercial and HVAC applications where corrosion is a problem.
UnderDuct by Monoxivent provides the most versatile
and cost effective Underground Fiberglass Reinforced Plastic
Duct (FRP) on the market. We provide a wide range of solu-
tions for the most demanding environments to standard la-
youts
Fiberglass Reinforced Plastic
Products Are:
- Light Weight
- High Strength
- Non-Conductive
- Corrosion Resistant
Typical FRP Applications:
- Ducts
- Hoods
- Stacks
- Pipes
- Platforms
- Tanks
28
YORK®VRF Gen 11 builds upon the game-changing innovations that make variable refrigerant flow systems the most flexible
and energy-efficient HVAC solutions in the world. With an expanded, re-engineered equipment line and new, groundbreaking
technology, YORK VRF Gen11 offers greater performance, more design freedom, new business opportunities and exceptional
control.
Light Commercial / Residential
Heat Pump / Heat Recovery
Vibro-Acoustics can provide all of the vibration isolators and seismic
restraint components, and documentation necessary – including in-state
Professional Engineer review, stamping and on-site inspection to meet
local code requirements – for all of your projects.
29
Thermal Ceramics Fire Master® Fast Wrap XL is a flexible blanket
composed of high temperature fibers classified for applications to 2192̊ F and
fully encapsulated in a durable glass fiber reinforced foil facing for easy handling
and installation. Is UL and ULC listed for 1 and 2 hour fire resistive enclosure
protection, zero clearance for kitchen exhaust ducts, electrical circuit protec-
tion and as a component in UL firestop designs for fire resistance rated floors,
ceilings and walls.
GERMICIDAL UV LIGHT SYSTEM
UVC light systems are currently the best available technology to reduce microbial growth on air conditioning coils. The high
levels of germicidal UV form UVGI system placed downstream and facing the chiller coils inhibits the growth of spores and molds
on the coils. This controls the proliferation of micro-organisms in HVAC systems, which reduces maintenance requirements and
eliminates odors.
30
Water Heaters
A storage-type or semi-instantaneous, fire tube water heater with a flange-
mounted, completely water-backed, 2-pass heat exchanger. Removability of the ex-
changer allows it and the tank to be maintained as separate components, thereby
extending service life of the appliance.
Vertiflo Pump Company specializes in the design and manufacture of industri-
al quality pumps. Their vertical, horizontal and self-priming pumps are deliv-
ered fast, usually in half the typical lead time! Vertiflo’s vertical sump pump line
offers up to 3000 GPM, 250’ Heads and 26’ depth. The horizontal end suction
pump line offers up to 3000 GPM and 300’ Heads.
The Altra Air fan with Whale power technology is used to destratify air
in airplane hangers, warehouses, hockey rinks, shopping malls, distribution
centers, office buildings, dairy farms or any buildings with high ceilings. Des-
tratification means drawing the warm air off the ceiling and reusing it at our
comfort level which creates a 35% energy savings.
The Altra-Air fan with whale power technology can greatly improve the working environment for employees by modu-
lating- "evening out"- the ambient working temperature. By increasing the speed on this fan, a cooling effect is created
during the hot days of Summer which can drop air conditioning cost substantially.
The AXIOM Fan is a new 10' diameter HVLS style fan specifically designed for commercial applications such as: schools,
retail stores, fitness facilities, restaurants, hotels, supermarkets, bowling alleys...even large homes!
31
Ceiling-recessed Cassette(4way) Ceiling suspended Wall-mounted
Up to 40% more efficient that central air
Up to 8 individual zones (per system)
Improves air quality, reducing dust, mold and allergens
Quiter than a human whisper
Remote control technology via kumo cloud™ app or other smart home-connected devices
Inverter– driven compressors
Vibration Eliminator
Vibration Eliminator Co., has been a designer and manufac-
turer of vibration control products for more than 70 years.
Their isolators include a wide range of spring and rubber-in-
shear mounts for the control of vibration, shock and noise in the
HVAC, Marine and Industrial fields. In addition to this vibration
mounts their engineers are always available to assist customers
in selecting and designing isolation systems for special projects,
including seismic applications.
Fabric-style media collectors offer the ability to remove
both small and large particles from indoor factory processes.
Choose from United Air Specialists’ wide assortment of
bag and barrier-type filtration media to best fit a specific
industrial process.
Bag / Media Collectors
32
33
KMC Controls is an American manufacturer of open, secure, and scalable building automation solutions. We provide smart, connected systems globally that deliver embedded intelligence and optimized control at the edge.
To meet the demand for open and interoperable digital systems, KMC offers
products designed around the BACnet® protocol. From powerful enterprise
software and applications to advanced application and building controllers,
KMC's scalable systems offer building owners and system integrators maxi-
mum flexibility in implementation and control.
Controllers Thermostats Relays, Output Transducers Sensors
Actuators Valves Enclosures & Power Supplies
Apollo America is the manufacturer of the Air Products and Controls brand
of duct detectors for smoke or carbon monoxide, specialty controls, low voltage re-
lays, control relays, power supplies, PCB mounting and enclosure options. These inno-
vative top quality products are found worldwide in HVAC, life safety, building automa-
tion, system integration, security and lighting applications. Proud to offer products
Made in the USA.
Powerlink is an international professional manufacturing and service of electrical machinery and equipment committed to the
research and development and manufacturing of diesel generators set (5-2250kVa), portable lighting towers and air compressors.
PowerLink generating sets mainly include: Soundproof sets, ultra-soundproof sets, portable sets, containerized power stations
and portable lighting towers.
34
Soft Starter Advantages
“Jerk Free” Machinery Control
Reduced Maintenance on Machinery, e.g., Bearings, Belts, Gears
Cost Effective, Quick Payback with Reduced Downtime, Parts and Repairs
Simple Startup and Installation
Compact Size, Enables Packaging for Harsh Environments
Proven Method to Extend Motor Life
Eliminates Electromechanical Starters and the Maintenance Required for these
Devices
Built-in Bypass for Critical Applications
Serial and Fieldbus Communications
Wide Range of Voltage and Current
Three Product Families-Basic to Advanced
Emerson Building Automation drives are intended to seamlessly interface
with a complete building automation system. They contain the common building
automation protocols that allow easy integration with new or existing building
controls. The drives also contain the features desired for the HVAC industry to
make their integration possible. Features such as fire mode, real time clock and
internal PID control allow the functionality desired by an integrated building con-
trol.
The Building Automation capabilities are provided by both the Affinity drives
which have been a stalwart since 2007 and the new HVAC Drive H300.
Variable Freqency Drives
To ensure safety and reliability, all BTU heaters meet or exceed UL, ARL and National Electric Code requirements.
Standard features include:
Automatic reset(s) for primary protection
Load carrying manual reset(s) for secondary protection
Hinged and latched control boxes
Durable, low watt density coiled heating elements
Heavy gauge galvanized control box and element wrapper
Duct heater control panels are designed to meet UL/ARL/NEC special requirements with the smallest control panel
possible.
Stainless steel terminals
Fan interlock circuit
Relay/contactor per stage
Reimers Electra Steam has been manufacturing electric boilers, electric steam generators and quality steam products
since 1908. We specialize in numerous applications including: humidification, bakery ovens, garment care, steam cleaning,
sterilization, comfort heating, dry cleaning, laboratories, food service, steam baths, and process steam. Our steam clean-
ers and boilers are manufactured to meet all of your steam needs in a convenient, safe, and economical way. All boilers
are built in accordance with requirements of the ASME boiler and pressure vessel code ASMECSD-1 and bear the nation-
al board stamp (CSA + CRN Available).
35
Tate’s Building Technology Platform® offers the perfect solution
for any facility to address its design goals. The benefits of under-
floor service distribution include many sustainable and high per-
formance advantages that support the overall aesthetic value of
the facility – all while being cost-effective in both construction and
operation.
The Liebert APS UPS adapts efficiently and effectively as the needs of
your users and core business power requirements change. The UPS
offers capacity on demand with FlexPower core modules – allowing
you to change capacity in 5kVA/4.5kW increments up to 20kVA.
Liebert APS, On line UPS, 5-20kVA
36
The Liebert ITA2 UPS offers economical, efficient and reliable three-
phase power for critical loads under 10kVA. Use in rackmount or
tower configuration. This intelligent UPS has scalable battery
runtimes, output distribution options, a high power factor and an op-
tional maintenance bypass cabinet.
Liebert ITA2 UPS, On line UPS, 3phase
One-to-one power protection is available with Liebert off-line and line-
interactive UPS systems suitable for home and small office applications.
These systems provide surge suppression, as well as sufficient battery
back-up to save work in the event of a power outage.
Liebert PSP UPS provides three battery-backed UPS outlets; one surge protec-
tion-only outlet; Data Line surge protection; USB port; Liebert MultiLink soft-
ware, and a two year warranty. The Liebert PSP is available in: 350 and 500VA
at 120VAC; and 500 and 650VA at 230 VAC.
Liebert PSA is a line-interactive UPS that provides up to five minutes of back-
up time at full load -- more than enough time to save work in progress and
shut down the connected equipment. USB shutdown software and a USB cable
are also included. The UPS offers three or six battery-backed outlets, and one
or two surge-only outlets. The UPS is available in 500VA, 650VA, 1000VA and
1500VA sizes, 120V and 230V models.
PSP Stand-by, 350-650VA
PSA Line Interactive, 500-1500VA
The Liebert PSI and Liebert PSI-XR provide compact, line-interactive UPS systems
designed especially for IT applications such as network closets and small
data centers. They provide reliable data center power protection for
servers, critical nodes, network workstations, large network peripherals,
network routers, bridges, hubs and other electronic equipment. Matching
battery cabinets are available to extend the on-battery operating time.
The Liebert® GXT4 UPS meets the need for higher power capacities in small
spaces. This UPS is designed for use in either rack or tower configurations and
features integrated maintenance bypass, as well as optional extended battery
runtime.
The Liebert®GXT MT+ features best-in-class power protection for critical
applications with the use of true on line double conversion technology. It satis-
fies safety criteria and electromagnetic compatibility standards while offering
intelligent monitoring and network management functions.
GXT4 On line UPS, 500VA-10,000VA
GXT-MT On line UPS, 1-3KVA
Rack-mount mode
PSI Line Interactive, 1000VA-3000VA
37
38
Liebert® NX™ UPS provides high efficiency in both Eco-mode and double
conversion mode, higher availability with hot-rectifier operation and flexibility
with SoftScale capacity upgrades.
BEST SUITED FOR: Banking, Insurance, Data Center/Colocations/Hosting, Ed-
ucations, Government, Healthcare, Retail and Wholesale
Liebert® NX 225-600kVA
Liebert NXL uninterruptible power supply (UPS) provides reliable data center
power protection and advanced technology for high power applications. The
Liebert NXL UPS is available in both single module and multi-module systems.
Capacities include 250, 300, 400, 500, 625, 750, and 1100 kVA unit ratings.
Unity PF as well as 0.9 PF load ratings are available. Voltages include 480, 575,
and 600. Matching battery cabinets and maintenance bypass cabinets provide a
complete power protection solution.
Liebert® NXL™ 250-1100kVA
Liebert® eXL S1™ 625-1200kVA
This UPS is a monolithic, transformer-free UPS that features optimized, indus-
try leading footprint and power per square foot, excellent operating efficiency,
robust electrical protection and intelligent paralleling that optimizes perfor-
mances at partial load to achieve superior cost savings.
The Liebert EXM USP provides future-proof scalability along with matching
ancillary cabinets to address your power systems demands.
Maintenance bypass cabinet
Bypass and distribution cabinet
Battery cabinet, Lithium-ion available with 480V models
Paralleling cabinet
Liebert® eXM™ 10-250kVA
Liebert DS provides precision control of the room environment,
including temperature, humidity, filtration and airflow. The flexible
Liebert DS offers high energy efficiency, user-friendly iCOM controls,
modular frame, front service access, and compressor options.
Liebert DS™ Direct Expansion
The Liebert® DSE™ provides industry-leading thermal management efficiency, protection and insight. It uses no water
for economization and its innovative design makes it up to 50% more efficient than legacy solutions. Designed with unpar-
alleled expertise, it is part of Vertiv’s Thermal Management solutions that make your data center as dynamic as you busi-
ness.
*No water usage * No water treatment * No outside air contamination * No dampers and louvers to maintain
Liebert® DSE, 50-250kW
The Liebert CW data center cooling system is specifically designed to
handle the high heat loads generated by computers and other elec-
tronic equipment, using an existing building chiller as a source of
chilled water cooling. Liebert iCOM controls and a variety of energy
efficient features combine to ensure reliable, economic data center
management.
Liebert CW™ Chilled Water, 38-440kW
39
Liebert® PDX™ and Liebert PCW™ compact perimeter cooling solutions let
you achieve the highest efficiency and protection with low capital, installation
and maintenance costs. Also Liebert ICOM™ thermal system control is availa-
ble for optimizing the performance of multiple cooling units and providing ac-
cess to operational data, system diagnostics and trending.
Liebert PDX™ & PCW™
The Liebert Mini-Mate2 is designed for data center cooling, humidity con-
trol and air filtration of small areas, such as computer, control and equip-
ment rooms. The Liebert Mini-Mate2 installs above a dropped ceiling, is
easy to install and service, and requires only front access for maintenance.
Liebert Mini Mate2
The Liebert Mini-Mate2 is designed for data center cooling, humidity control
and air filtration of small areas, such as computer, control and equipment
rooms. The Liebert Mini-Mate2 installs above a dropped ceiling, is easy to
install and service, and requires only front access for maintenance.
Liebert Datamate
40
Liebert X-treme Density heat removal system is designed to address the higher heat loads generated by densely
populated electronic rack enclosures. It can cool more than 30 kW per rack. Individual modules can improve enclo-
sure airflow or cool hot spots, or zones. The modules in the Liebert XD system use a unique heat rejection process,
using a pumped refrigerant. It operates at low pressure and becomes a gas at room temperatures, making it ideal for
use around electronic equipment. Liebert XD complement the precision cooling provided by Liebert Deluxe Sys-
tem/3 or Liebert DS, and are built with the quality and features you expect from Liebert.
Xtreme Density
XDH XDC XDV
41
42
Liebert Foundation MCR is an integrated modular data center infrastructure solu-
tion that ensures protection for servers, network components and other critical elec-
tronics. The Liebert Foundation MCR is a data center rack system that features a load-
sized, computer-grade air conditioner located at the bottom of the enclosure, offering
top-mount design, supplying cool air to sensitive equipment on all levels. A back-up
cooling system ensures environmental security. Data center power is supplied and pro-
tected through a Liebert GXT on-line UPS, or Liebert PSI line-interactive UPS.
Liebert MCR, Integrated Cooling Enclosure
These power strips provide load monitoring and control to the receptacle level, for easy
centralized management of rackmount equipment. Vertical "zero-U" and rackmount mod-
els available, with configurations to fit any IT need.
Liebert MP Advanced Power Strips
Liebert SiteScan Web allows users to monitor and control vir tually any piece of critical support equipment — whether it's located in the next room or in a facility on the other side of the country. Web-based data center monitoring provides centralized oversight of Liebert precision air, power and UPS units, as well as many other analog or digital devices. Features include real-time monitor-ing and control, data analysis and trend reporting, and event management. Liebert SiteScan Web uses a network of microprocessor-based control modules to monitor and control Liebert precision cooling, power, UPS and other critical equipment. The system uses a web-based server running Windows XP, 2003 Server or 2000 and a conventional web browser to gather information, change operating parameters, run reports and perform similar functions on various types of critical equipment.
Liebert SiteScan Web Monitoring
The NetSure DC Power technology platform is the next-generation plat-
form for integrated DC power technology, offering you a global standard for
reliable power products. Combining Emerson Network Power’s unmatched
industry knowledge with proven expertise in localization and adaptability, the
NetSure DC Power technology platform offers best-in-class power tech-
nologies engineered to meet each client’s specific global, regional and local
needs.
Integrated systems for indoor and outdoor applications
Key features
Compact flexibility – Provides more space for revenue-generating
equipment
Constant power – Delivers more current at lower voltages, to
meet load or recharge demand
Compliant with global standards – Delivers quality, performance
and dependability, no matter what the application or environment
demands, to meet changing needs
Remote access – Provides options allowing users to view, control
and interact with the system, using TCP/IP, RS-232, web browser
(HTTP) or SNMP
Netsure 211
Netsure 502
43
The Universal Power Cabinet provides a single platform
with multiple configurations to allow for a variety of DC power
and battery reserve requirements. The system is preconfigured
to grow with power and battery reserve as your site needs in-
crease long term.
Outside Plant Product
Universal Power Cabinet
44
ASCO Automatic Transfer Switch products provide all the
intelligence your generator needs to make sure the power stays
on when utility power fails. It automatically senses loss of utility
power, and signals your generator to start and restore power to
your business or home. ASCO Automatic Transfer Switch will
automatically transfer your vital loads back to utility power
when it has been restored.
Albér offers an array of Data Center Battery Monitoring and Maintenance Solutions that are essential to maintaining your data center's reliability. Today's need for immediate and constant data transfer leaves little room for server down-time. Your backup batteries are your main line of defense when the grid fails. Monitoring their health keeps you keenly aware of how well your system will weather a power disruption. Ready, reliable, and tested – you can trust our best-in-class monitoring solutions.
AmerCable is a leading supplier of power distribution cables to the auto-
motive robotic assembly market and other industrial portable power applica-
tions. Our cables are manufactured to provide greater flexibility and durability
– allowing them to withstand wear and abuse in extreme, rugged operating
conditions and environments.
AmerCable has a cable that meets your most demanding application specifi-
cation and the operational excellence to deliver your cable on-time. In fact,
AmerCable is #1 in the industry for on-time deliveries and in rapid produc-
The NetSpan™ FDP series of optical splice and distribution
products permits fiber splicing and improves cable organization. A
separate, factory pre-configured, Fiber Distribution Closure
(FDC) mounts inside a nonmetallic ProFORM® pedestal to form
this unique integrated fiber distribution solution.
The NetSpan™ FDH series of enclosures provides connections
between fiber optic cables and passive optical splitters in the out-
side plant environment and is ideal as a Local Convergence Point
(LCP) for aggregation in a centralized splitting Passive Optical
Network (PON) FTTx architecture.
Emerson offers a comprehensive line of NetSpan™ Integrated Solutions
pre-configured for FTTx deployment.
Cable Innovation
Designing insulating and jacketing materials that are more flexible with greater resistance to abrasion and
moisture
Cable construction that last longer—providing reduced down time for increased productivity
New product development that addresses environmental, safety and cost reduction issues specific to your
application
Operating Excellence
On-time delivery backed by our industry leading shipment percentage of 99% + average for the past 36
months.
Standard lead-time of 8 to 10 weeks
Urgent response shipment capability of 2 to 4 weeks
AmerCable is and ISO-9001 certified manufacturer
45
46
EnerSys is the global leader in stored energy solutions for industrial applications.
We complement our extensive line of motive power, reserve power, aerospace/
defense and specialty batteries with a full range of integrated services and sys-
tems. With sales and service locations throughout the world, and over 100 years
of battery experience, EnerSys is the Power/Full
Solution for stored DC power products.
C&D Technologies, Inc. is a technology company that produces and markets systems
for the power conversion and storage of electrical power, including industrial batteries and
electronics. This specialized focus has established the company as a leading and valued sup-
plier of products in reserve power systems and electronic power supplies. The company's
core business focuses on reserve power systems supplied to leading operators of telecom-
munications, data transmission, infrastructure computer systems and utilities to enable
them to maintain critical operations during power outages.
Dwyer Instruments stand for quality, reliability, and readily avail-able low cost products. As a leading manufacturer in the controls and instrumentation industry, we continue to grow and serve major markets including, but not limited to HVAC, chemical, food, oil and gas, and pollution control.
Some of our most important product categories are:
Flow sensors
Flow meters
Water meters
Level indicator/switches
Temperature sensors/transmitters
Humidity transmeters
Air quality monitors
Rev. November 2018
Member of:
PO Box 3826, Guaynabo PR 00970 T.787-625-1818
techdist@tech-dist.com www.tech-dist.com