Post on 27-Jul-2020
Maximum Return on Investment.Duo cell VT 160 and VT 250 for high productivity at a great price.
E[M]CONOMymeans:[ ]
For more productivity: both the purchasing price and the performance values, such as the cycle time, use of manpower, etc., show
the great efficiency of this right-hand and left-hand vertical turning machine in their interplay. Workpieces can be fully machined,
independently of one another in the two separate workspaces – in other words, identical and different production processes are
possible. The two machines are connected by a turning station. The two separate workspaces offer greater flexibility and safety in
production processes. The Y axis, driven tools and multifunctional plate offer ideal preconditions for complete machining without
any compromises.
Duo cell VT 160 and VT 250
[Work area]- Optimized access to the work area
- Best ergonomics for operators
[Main spindle]- Powerful main spindle with a high torque for
short cycle times
[Tool turret]- Turret equipped with 12 tool holder fixtures
(stationary and driven tools available)
- Multifunctional plate for stationary boring
tools, milling unit and special tools in the
model range of VT-machines
An integrated bypass line allows both simultaneous pro-duction of different workpieces, and different voltages for OP 10 and OP 20.
The machine is equipped with a 180° workpiece turner and a lifting station (lift height 300 mm). It can be ope-rated pneumatically by a fixed stop or electrically by a NC axis. The gripper stroke is designed for diameters up to 220 mm. The turning station has a pneumatic drive.
The pick-up station for the blank is designed with gimbal suspension and drive-over protection.
VT160 / 250 DUO - all technical challenges involved in 2-sided machining have been resolved here:- Workpiece 1 is rotated through 180° downstream of
OP 10 and deposited on the same pallet.- Workpiece 2 is rotated through 180° downstream of
OP 10 and deposited on pallet 2 for OP 20.- Different workpieces, workpiece 1 on OP 10/machine 1,
workpiece 2 to OP 20/machine 2.
180° workpiece turner with workpiece switch for pallet 1 and pallet 2.
Changes and enhancements are possible thanks to requirements-driven configuration options in terms of the production environment, line layout and automation with extremely simple handling. A footprint of 21 m2 is sufficient for this.
180° turning station with transport chain and workpiece carrier for the OP 20.
180° turning station, turning process completed:Workpiece carrier for the OP 10 without a workpiece moves back via a switch for loading with blanks.Workpiece carrier for the OP 20 with workpiece moves to processing of the second operation.
The DUO VT is available as a meander design, which is equipped with a 180° turner and an optional switch. Up to 25 pallets can be used per operation. Separate con-trols exist for different operating modes (manual, setup, automatic).
Wheel hub(steel)
Belt pulley(steel)
Plate flange(steel)
V-belt pulley(steel)
� Right- and left-hand machines� Complete machining (OP 10+OP 20) for
maximum flexibility� Tooling-friendly workspaces� Stable guideway concept (BG 45) on the X and
Z axis� 12 station turret with driven tools� Transfer unit with 180° turning device
Highlights Performance
[Control]- Simple programming and operation thanks
to the state-of-the-art control technology
- Sinumerik 828D with Shopturn dialog pro-
gramming and Sinamics drives
Leistung und Momentenverlauf VT-160 Hauptspindel - Hohlspindelmotor
M [Nm]
0
0 1000 2000 3000 4000 5000 6000
50
25
75
125
100
150P [kW]
n [min-1]
30
20
25
15
5
10
07000
P (S6-60%ED)
P (S1-100%ED)
M (S6-60%ED)
M (S1-100%ED)
Sie
men
s - H
ohls
pind
elm
otor
Motor characteristics for hollow spindle motor
Layout pallet transport OVAL
Layout pallet transport MR and MRW
Details in millimeters
1680
1916
2029
4500
VT16
0=21
0VT
250=
280
1777
2722
1680
4515
VT16
0=21
0VT
250=
280
1562
1680
2041
19161562
804
877
2736
1562 1562
5040
5040
8428
8428
VT160DUO Palettentransport OVALVT250DUO Palettentransport OVAL
VT160DUO Palettentransport MRW (Variante mit Palettentransport MR gleiche Abmessung)VT250DUO Palettentransport MRW (Variante mit Palettentransport MR gleiche Abmessung)
1680
1916
2029
4500
VT16
0=21
0VT
250=
280
1777
2722
1680
4515
VT16
0=21
0VT
250=
280
1562
1680
2041
19161562
804
877
2736
1562 1562
5040
5040
8428
8428
VT160DUO Palettentransport OVALVT250DUO Palettentransport OVAL
VT160DUO Palettentransport MRW (Variante mit Palettentransport MR gleiche Abmessung)VT250DUO Palettentransport MRW (Variante mit Palettentransport MR gleiche Abmessung)
Details in millimeters
PALLET TRANsPORT
www.emco-world.comEMCO MAIER Ges.m.b.H. Salzburger Str. 80 . 5400 Hallein-Taxach . Austria Phone +43 6245 891-0 . Fax +43 6245 86965 . info@emco.at
EMCO Magdeburg GmbH Gröperstraße 18 . 39124 Magdeburg . Germany Phone +49 391 2440 . Fax +43 391 244283 . info@emco-magdeburg.de
Pallet transport Duo (Oval) VT160 VT250Processing OP10/OP20Workpiece diameter 160 mm (6.3") 220 mm (8.7")Workpiece height 150 mm (5.9") 150 mm (5.9")Loading/pallet 8 kg (17.6 lb)Storage and buffering capacity 15 pallets/OPWorkpiece turning deviceVertical axis (Z) adjustable fixed stopControl unit SiemensOperation 6“ Touch-PanelPallet transport Duo (MR)Processing OP10/OP20Workpiece diameter 160 mm (6.3") 220 mm (8.7")Workpiece height 150 mm (5.9") 150 mm (5.9")Loading/pallet 8 kg (17.6 lb)Storage and buffering capacity 25 pallets/OP
Pallet transport Duo (MR)Workpiece turning deviceVertical axis (Z) adjustable fixed stopControl unit SiemensOperation 6“ Touch-PanelPallet transport (MRW)Processing OP10/OP20
part A and BWorkpiece diameter 160 mm (6.3") 220 mm (8.7")Workpiece height 150 mm (5.9") 150 mm (5.9")Loading/pallet 8 kg (17.6 lb)Storage and buffering capacity 25 pallets/OPWorkpiece turning deviceVertical axis (Z) NC axisControl unit SiemensOperation 6" Touch-Panel
[Technical data]
Work area VT 250 VT 160
Chuck size 250 mm (9.8“) 160 mm (6.3“)Maximum work piece diameter 250 mm (9.8“) 160 mm (6.3“)Maximum work piece length 150 mm (5.9“) 150 mm (5.9“)TravelTravel X / Y / Z axis 520 / +- 90 / 310 mm (20.5“ / +- 3.5“ / 12.2“) 620 / +- 65 / 310 mm (24.4“ / +- 2.51“ / 12.2“)Rapid motion speed X / Y / Z 60 / 15 / 30 m/min (2362 / 590.5 / 1181“/min) 60 / 15 / 30 m/min (2362 / 590.5 / 1181“/min)Main spindle - belt driven Speed range 0 – 4000 rpm -Drive power 25 kW (33.5 hp) -Torque 280 Nm (207.2 ft·lbs) -Spindle nose / DIN 55026 A2-6 -Main spindle - ISMSpeed range 0 – 5000 rpm 0 – 7000 rpmDrive power 29 kW (38.9 hp) 21 kW (28.2 hp)Torque 280 Nm (207.2 ft·lbs) 150 Nm (36.8 ft·lbs)Spindle nose / DIN 55026 A6 A5Tool turretNumber of tool holders 12 12Tool shaft according VDI (DIN 69880) VDI40 VDI30Driven tools 12 12Speed range 0 – 4000 rpm 0 – 5000 rpmDrive power 8.5 kW (11.4 hp) 6.7 kW (9.0 hp)Torque 40 Nm (29.50 ft·lbs) 25 Nm (18.4 ft·lbs)Coolant systemTank volume 230 litres (60 gal) 230 litres (60 gal)Coolant pressure standard/optional 3.7/14 bar (50 psi) 3.7/14 bar (50 psi)Dimensions and weightOverall height 2360 mm (93“) 2360 mm (93“)Floor space L x D 2240 x 2185 mm 2240 x 2185 mm(w/o chip conveyor and part feeder) 88 x 86“ 88 x 86“Machine weight 3800 kg (8380 lb) 3400 kg (7500 lb)
EN
349
2 . 0
9/13
. Tec
hnic
al m
odifi
catio
ns re
serv
ed. E
rror
s an
d om
issi
ons
exce
pted
.