https://lh6.googleusercontent.com/-3s8plLH9ccU/TXyT9XNckuI/AAAAAAAAAI8/OZ4ngOZTFuY/s1600/123.JPG

https://lh4.googleusercontent.com/-6OlIWXOWa3w/TXyToo1J9PI/AAAAAAAAAI4/XUdhOZ_z3UY/s1600/123.JPG

https://lh3.googleusercontent.com/-EIGFPlJNWJo/TXyTOw_H7VI/AAAAAAAAAI0/VshMHaG6_xY/s1600/123.JPG

https://lh4.googleusercontent.com/-imTf3AjaS7k/TXySenoNt8I/AAAAAAAAAIw/fZjZRo2ML88/s1600/123.JPG

https://lh3.googleusercontent.com/-AxW6bRos-UU/TXySGyrztcI/AAAAAAAAAIs/RyYClJnWuj4/s1600/123.JPG

https://lh6.googleusercontent.com/-74rkVcDhbhE/TXyRoqqndSI/AAAAAAAAAIo/B1bcnHtLsFg/s1600/123.JPG

RESULT : Thus the shear angle is found for different depth of cuts.

www.kinin

dia.co

m