Post on 20-Oct-2021
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 1 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
MATHEMATICAL LITERACY
US 9016: REPRESENT ANALYSE AND CALCULATE SHAPE AND MOTION IN 2 AND 3 DIMENSIONAL
SPACE IN DIFFERENT CONTEXTS; NQF LEVEL 4, 4 CREDITS
Learner Name: Learner ID #: Learner Student Number:
Formative Assessment
Class Activities
During and after the initial training the learner will be required to complete a number of activities. These activities will be both individual and group activities (class activities formative activities). The activities are numbered and are to be included in the learner’s portfolio of evidence. These activities will measure the progress of the learner through the programme. For authenticity reasons these activities must be handwritten.
Class Activity 1: Estimate or measure quantities
Complete the following in small groups / individually as per the instructions from your facilitator:
9016.1.1 9016.1.2 9016.1.3 9016.1.4
1. When you are working on a project then you would need to know about measuring instruments and computational tools used to measure various items and quantities. What instruments and/or computational tools will you use to measure or calculate the following? Complete the table:
Width of a page
Temperature
To calculate a percentage
2 x 4
Adding 45 numbers
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 2 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Time
The floor area of a room
Mass
Distance between two towns
Sugar in a sugar pot
2. The measuring cylinder is used to measure volumes of liquid accurately. What does the following picture show / illustrate?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 3 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
3. Estimate the following measurements:
The length of the room you are in now
The distance to the nearest airport
The temperature today
The number of people in your organisation
4. Identify and list at least 3 things that you can do to ensure that your measurements are accurate:
5. What is the difference between Accuracy and Precision?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 4 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Place any extra evidence after this page, clearly marked for easy reference.
Class Activity 2: Select and use appropriate formulae and units in measurement and calculation
Complete the following in small groups / individually as per the instructions from your facilitator:
9016.1.5 9016.1.6 9016.1.7
9016 EEK2 9016 EEK3
1. If you wanted to carpet the training room you are kitting out as part of your project, what size carpet would you need to buy? Show your calculations (using estimations)
2. If you wanted to tile the training room walls, and each box of tiles= 1,2m², how many boxes would you require? Show your calculations (using estimations)
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 5 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
3. At a cost of R55 per box, how much would it cost to tile the training room?
4. There are specific situations at home or at work/during a project where one has to be absolutely accurate (correct) in measurement. Name 3 such situations and explain why accuracy is important in each case
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 6 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
5. Calculate the following (show your calculations):
27% of 333
¾ + (2/5 x 4/7),
One third of 96 plus three quarters of 44 minus 20% of 110
The average of 16, 22, 24, 18 and 21
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 7 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
6. In what units will you express the following readings/measurements?
Cooldrink in a tin
Distance to the stars
Mass of a packet of sugar
Speed of a bullet
Temperature
Water in a drum
Breadth of a room
Size of a farm
Capacity of a truck
Distance between two towns
7. Write the following in scientific notation:
45 000
0.00000074
304 million
123/10 000 000 000
6000 x 74000000
24 mg + 14.664 g
0.00000006 x 0.000054
8. When you are working on a project then you would need to how to read product specifications. Read the Audi A6 specifications and then answer the questions that follow
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 8 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
a. Find three examples of specifications regarding volume
b. If the diameter of the Audi’s wheels is 17 inches, calculate the circumference of the wheel
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 9 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
c. If you travel to Durban from Johannesburg (650 km) in your new Audi A6, how much petrol will you use on average
d. How long will it take you to get to Durban from Johannesburg at an average speed of 120 km/h?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 10 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
e. Give the dimensions of the Audi A6 in metres
Length:
Width:
Height:
9. You want to tile the bathroom as part of your building project. The bathroom dimensions are shown below with the shaded area indicating the bath. What is the size of the area that must be tiled?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 11 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
10. A rectangular swimming pool is 11, 5 m long and 5 m wide. How many metres of fencing are needed to enclose the pool if you erect the fencing 2m from the edge? Show the sketch and your calculations:
11. At R48.50 a square metre, what is the cost of laying a cement floor in a room that is 6m long and 4 m wide?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 12 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
12. You want to share the following recipe with your friends in Britain. Convert the recipe to their relevant units:
Classic Crème Caramel 940 ml milk 375 ml vanilla sugar 5 eggs 4 egg yolks 15 ml vanilla
SERVES 6
Scald the milk and allow to cool 20 minutes. In a saucepan, melt 180 ml of sugar and cook until dark brown, stirring constantly. Take care not to scorch. Pour into a warm mould, covering the bottom and sides. Beat the eggs and egg yolks with the remaining sugar. Slowly whip in the milk and vanilla. Pour into the sugar-lined mould. Place mould in a second pan filled halfway with hot water. Bake for 45 minutes in a 160° oven. Cool, then chill. To serve, invert on to a rimmed serving platter.
Britain (Imperial)
Milk (940 ml)
Vanilla sugar (375 ml)
Vanilla (15 ml)
Oven (160°)
13. How far up on a wall of a building will a 10-meter ladder reach if the foot of the ladder is 1, 25 metres from the wall? Draw the situation and then explain your answer:
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 13 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
14. Calculate the perimeter (circumference) and area of the following drawing:
20 cm
34 cm
15. Calculate the “external surface” area of a rectangular prism with dimensions: 20 cm, 25
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 14 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
cm, 40cm
16. Provide the formula for the following measurement calculations:
Perimiter
Area of a square
Area of a Triangle
Area of a Circle
Surface Area of a Cylinder
Volume of a Rectangular Block
Volume of a Right Prism
Volume of a Cylinder
Speed
Acceleration
17. Jeannine has a bag with 3 CDs, 4 marbles, 7 books, and 1 orange.
a. What is the ratio of books to marbles?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 15 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
b. What is the ratio of CDs to the total number of items in the bag?
18. A rectangular swimming pool is 11,5 m long, 5 m wide and 3m deep throughout. Calculate its volume
19. Calculate the area of a triangle whose base is 13.9 m. and whose altitude is 7.8m
20. Calculate the area of parallelogram GDEF if the base is 5m and the altitude is 3,2m
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 16 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
21. How many cubes were needed to build the design in this figure?
3,2m
5m G D
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 17 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
22. Find the circumference and area of a circle with a diameter of 14 cm
Place any extra evidence after this page, clearly marked for easy reference
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 18 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
.
Class Activity 3: Describe and represent 3-dimensional objects
Complete the following in small groups / individually as per the instructions from your facilitator:
9016.2.1 9016.2.2 9016.2.3 9016.2.8 9016.2.9
9016.2.10 9016.2.11 9016.2.12
9016 EEK1 9016 EEK4
1. When you are working on a project then you would need to know about shapes such as polygons. How many sides do the following polygons have:
Pentagon
Hexagon
Heptagon
Octagon
Nonagon
Decagon
Triangle
2. Are the following shapes symmetrical?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 19 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
3. The following is created using hexagons. What is this grouping an example of?
4. The following is a net of a shape / object. Which shape is represented?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 20 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
5. Name the following 2- and 3 dimensional shapes / objects:
6. Why do we use a scale in drawings and maps?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 21 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
7. When you are working on a project then you would need to know about making and interpreting drawings. Draw a front view of your house in the space below
8. Draw a rough floor plan (use an appropiate scale) for a house with the following rooms:
2 bedrooms; 1 bathroom; 1 kitchen; 1 living room; 1 passage
Place any extra evidence after this page, clearly marked for easy reference.
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 22 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Class Activity 4: Analyse relations and base conjectures on investigations of geometrical properties
Complete the following in small groups / individually as per the instructions from your facilitator:
9016.2.4 9016.2.5 9016.2.6 9016.2.7
1. The following are representations of everyday items1. As a project manager, you often need to simplify things. You need to identify the 3-dimensionsl object / figure that is represented by each of the items – circle your answer in the column:
Christmas tree
cube
cone
rectangular prism
sphere
Trash can
sphere
cone
cylinder
cube
Candle
cube
cylinder
sphere
pyramid
Suitcase
rectangular prism
cube
sphere
pyramid
1 Adapted from: from: http://www.studyzone.org/testprep/math4/e/geometric3d3l.cfm
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 23 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
These presents
cubes
cylinders
rectangular prisms
spheres
This tent
cube
cone
sphere
pyramid
The little boy’s books
cylinders
pyramids
rectangular prisms
cubes
Soccer ball
cylinder
cube
circle
sphere
Tissue box
sphere
rectangular prism
pyramid
cube
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 24 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
2. Draw a top and side view of the tissue box:
3. Study the map and answer the questions below:
(Remember that, because roads twist and turn, the answers that you get will be estimates rather than accurate figures.)
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 25 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
a. Describe how you will get from West Gate to the Science Museum.
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 26 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
b. Approximately how far is it if the scale is 1 cm= 5 km
4. Enter the coordinates of points B, C, D, F and G on the following figure:
5. Study the following map of South Africa depicting the main roads and then answer the questions that follow
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 27 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
a. Express the scale used in this map as a ratio.
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 28 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
b. Using your ruler, measure the shortest distance between Johannesburg and Cape Town and express it as kilometres.
c. How far (in kilometres) is Mmabatho from Johannesburg?
6. Identify and list the 5 simple machines that you would use in everyday life:
Place any extra evidence after this page, clearly marked for easy reference.
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080
US 9016
Page 29 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Reflection
Individually complete the following:
9016
The purpose of reflection is for you to consider what you have learnt and how you will use it in the future. Answer the following questions as honestly as you can:
1. After the training programme, I can now (tick):
Measure, estimate, and calculate physical quantities in practical situations relevant to the adult with increasing responsibilities in life or the workplace
Explore analyse and critique, describe and represent, interpret and justify geometrical relationships and conjectures to solve problems in two and three dimensional geometrical situations
2. How would you apply what you have learnt during this skills programme in the workplace?
3. What was the most significant thing you have learnt in this programme?
4. What do you think you still need to learn more about? (Action Plan)
5. What did you enjoy most about the training?
6. If there was something about the training that you could change, what would it be?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 7468 US 9016 US 9015
Page 30 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Facilitator Observation Checklist
The facilitator needs to provide feedback on the participation of each learner in the class:
9016
The purpose of the facilitator observation checklist is to provide the learner with feedback about his/her participation during the formative class activities and also to highlight the observed strengths and perceived weaknesses that the learner displayed during the workshop and/or learning programme.
The facilitator is required to complete the Facilitator Observation checklist for each learner in his/her Learner Workbook. The learner needs to sign-off the document to confirm that he/she has received the observation feedback.
Learner Name Facilitator Name Date
Class Activity Group /
Individual Completed
Participation Comments on perceived strengths and weaknesses of the learner
1. Estimate or measure quantities
2. Select and use appropriate formulae and units in measurement and calculation
3. Describe and represent 3-dimensional objects
4. Analyse relations and base conjectures on investigations of geometrical properties
5. Reflection Individual
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 7468 US 9016 US 9015
Page 31 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Has the learner sufficiently demonstrated application of the following CCFO’s during the facilitated session?
CCFO1:
Identify and solve problems:
Use mathematics to analyse, describe and represent financial situations and to solve problems
based on data, statistics and probability
CCFO2:
Work effectively with others as a member of a team, group or organisation:
when monitoring cost budgets to ensure compliance
CCFO3:
N/A
CCFO4:
Collect, analyse, organise and critically evaluate information:
to plan and make provision for monitoring budgets and other financial situations
to make sense of situations
Yes / No Yes / No Yes / No Yes / No
CCFO5:
Communicate effectively:
regarding elements of the cost budget
to represent data, statistics and probability and effectively communicate or critique conclusions
CCFO6:
N/A
CCFO7:
N/A
CCFO8:
Use mathematics to critically analyse, describe and represent situations and to solve problems related to the life or work situations of the adult with increasing responsibilities
Yes / No Yes / No Yes / No Yes / No
Statement by the facilitator:
The learner has demonstrated sufficient knowledge and skill during class to proceed with the summative assessment (circle)
Yes No
Additional comments: (optional)
Learner Signature Facilitator Signature
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 32 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Summative Assessment
Knowledge Questions Please answer the following knowledge questions related to the unit standard embedded knowledge and assessment criteria and place it in your portfolio of evidence. Remember to number the answers according to the question numbers, should you need to attach a document.
You have to complete this Knowledge Questionnaire individually based on the theory that you covered in your Learner Guide and the formative assessments you completed in your Learner Workbook.
Note: The marks shown merely gives you an indication of how much to answer on the question.
Knowledge Questions Individually complete the following:
Unit Standard Reference
1. List any 3 measuring instruments and say what they are used to measure
9016.1.1 9016.1.3
(3)
2. How does one ensure accuracy in measurement? 9016.1.2 9016.1.4
9016 EEK2
(3)
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 33 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
3. Explain the difference between mass and weight 9016.1.5
(2)
4. Calculate the perimeter of the rectangle, with sides of 30m and 15m. Show all your calculations
9016.1.6 9016.1.7
9016 EEK1 9016 EEK 3
(5)
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 34 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
5. Write down the formula to calculate the area of a triangle 9016.2.1
9016 EEK2
(3)
6. Name the views for the following drawings (side, angled, top): 9016.2.3 9016.2.9
9016 EEK4
(3)
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 35 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Practical Activities
Individually complete the following activities to show your ability to integrate and apply your knowledge and skills in the workplace.
Practical Activity 1: Mathematical Literacy
Individually complete the following:
9016 Related EEKs
CCFO1-8
You need to show that you can
Represent, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts
Complete the following in your workplace:
1. Measure, estimate, and calculate physical quantities in practical situations relevant to the adult with increasing responsibilities in life or the workplace. Complete the following tasks and provide evidence to show that you have done the following:
a. You need to demonstrate to your facilitator that you can measure, estimate and calculate physical quantities. Make sure that you demonstrate the following:
Basic instruments to include those readily available such as rulers, measuring tapes, measuring cylinders or jugs, thermometers, spring or kitchen balances, watches and clocks. In situations which necessitate it such as in the workplace, the use of more accurate instruments such as vernier callipers, micrometer screws, stop watches and chemical balances.
Quantities to estimate or measure to include length/distance, area, mass, time, speed acceleration and temperature.
Distinctions between mass and weight, speed and acceleration.
The quantities should range from the low or small to the high or large.
Mass, volume temperature, distance, and speed values are used in practical situations relevant to the young adult or the workplace.
Calculate heights and distances using Pythagoras' theorem.
Calculate surface areas and volumes of right prisms (i.e., end faces are polygons and the remaining faces are rectangles) cylinders, cones and spheres from measurements in practical situations relevant to the adult or in the workplace
b. Submit evidence of all of the above, e.g. photographs, documents showing calculations, etc. to substantiate your demonstration
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 36 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
c. Request your facilitator to sign off the following observation sheet and provide comments (very important) about your knowledge and skills demonstrated
Learner Name Date
Measure, estimate, and calculate physical quantities in practical situations relevant to the adult with increasing responsibilities in life or the workplace
Did the learner:
Yes/No Comments
1. Read scales on the measuring instruments correctly?
2. Estimate quantities to a tolerance justified in the context of the need?
3. Choose the appropriate instrument to measure a particular quantity?
4. Measure quantities correctly to within the least step of the instrument?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 37 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
5. Select and use appropriate formulae?
6. Carry out calculations correctly and take the least steps of instruments used into account when reporting final values?
7. Use symbols and units in accordance with SI conventions and
as appropriate to the situation?
Facilitator Signature
Facilitator Name
2. Explore, analyse and critique, describe and represent, interpret and justify geometrical relationships and conjectures to solve problems in two and three-dimensional geometrical situations. Complete the following tasks and provide evidence to show that you have done the following:
a. You need to demonstrate to your facilitator that you can explore, analyse and critique, describe and represent, interpret and justify geometrical relationships and conjectures to solve problems. Make sure that you demonstrate the following:
Applications taken from different contexts such as packaging, arts, building construction, dressmaking. The operation of simple linkages and mechanisms such as car jacks.
Top, front and side views of objects are represented.
Use rough sketches to interpret, represent and describe situations.
The use of available technology (e.g., isometric paper, drawing instruments, software) to represent objects.
Use and interpret scale drawings of plans (e.g., plans of houses or factories; technical diagrams of simple mechanical household or work related devices).
Road maps relevant to the country.
World maps.
International time zones.
The use of the Cartesian co-ordinate system in determining location and describing relationships in at least two dimensions.
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 38 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
b. Submit evidence of all of the above, e.g. photographs, documents showing calculations, etc. to substantiate your demonstration
c. Request your facilitator to sign off the following observation sheet and provide comments (very important) about your knowledge and skills demonstrated
Learner Name Date
Explore, analyse and critique, describe and represent, interpret and justify geometrical relationships and conjectures to solve problems in two and three-dimensional geometrical situations
Did the learner:
Yes/No Comments
1. Base descriptions on a systematic analysis of the shapes and reflect the properties of the shapes accurately, clearly and completely?
2. Ensure that descriptions include quantitative information appropriate to the situation and need?
3. Represent three-dimensional by top, front and side views?
4. Assimilate different views correctly to describe 3-dimensional objects?
5. Use available and appropriate technology in producing and analysing representations?
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 39 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
6. Analyse relations of distance and positions between objects from different views?
7. Base conjectures as appropriate to the situation, on well-planned investigations of geometrical properties?
8. Ensure that the representations of the problems are consistent with and appropriate to the problem context - the problems are represented comprehensively and in mathematical terms?
9. Achieve results through efficient and correct analysis and manipulation of representations?
10. Present problem-solving methods clearly, logically and in mathematical terms?
11. Ensure that reflections on the chosen problem solving strategy reveal strengths and weaknesses of the strategy?
12. Identify alternative strategies to obtain the solution and compare it in terms of appropriateness and effectiveness?
Facilitator Signature
Facilitator Name
Place your evidence after this page; clearly marked for easy reference.
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 40 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Practical Activity Checklist
Please tick that you have submitted the following evidence as per the instructions above:
Learner Name
Date
Practical Activity 1 Submitted
Yes/No
Name of my document / Comments
1. Measure, estimate, and calculate physical quantities in practical situations relevant to the adult with increasing responsibilities in life or the workplace
a. You need to demonstrate to your supervisor / qualified colleague that you can measure, estimate and calculate physical quantities
9016.1
b. Submit evidence of all of the above, e.g. photographs, documents showing calculations, etc. to substantiate your demonstration
9016.1
c. Request your supervisor / qualified colleague to sign off the observation sheet and provide comments (very important) about your knowledge and skills demonstrated
Signed off observation sheet
9016.1
2. Explore, analyse and critique, describe and represent, interpret and justify geometrical relationships and conjectures to solve problems in two and three-dimensional geometrical situations
a. You need to demonstrate to your supervisor / qualified colleague that you can explore, analyse and critique, describe and represent, interpret and justify geometrical relationships and conjectures to solve problems
9016.2
b. Submit evidence of all of the above, e.g. photographs, documents showing calculations, etc. to substantiate your demonstration
9016.2
c. Request your supervisor / qualified colleague to sign off the observation sheet and provide comments (very important) about your knowledge and skills demonstrated
Signed off observation sheet
9016.2
7. Critique and use techniques for collecting, organising and representing data
Learner Signature
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 41 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
PERSONAL NARRATIVE
Answer the following questions based on your experience during the completion of this module. Discuss what you did well and what you would like to do differently.
What went well? What would I do differently?
1 I was able to identify and solve problems effectively throughout the various activities
completed in this module.
2 I was able to understand how different workplace activities have an impact on each other.
3 I was able to use new technology effectively in my daily tasks that I carried out.
4 I was able to communicate effectively with my team members and supervisors.
5 I was able to complete all my work in an organized and efficient manner.
6 Additional Comments
Learner Name: Signature
Facilitator Name: Signature
Date
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 42 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Witness Testimony
In the workplace, or in simulated classroom activities, you need to show your ability to integrate what you have learnt. This can be measured with the Specific Outcomes and the Critical Cross Field Outcomes of the Unit Standard.
Request your facilitator to complete the following form to show that you are able to integrate your learning into everyday workplace application. It is necessary that the supervisor also provides a short comment on the form:
Learner Name Date
Did the Learner: Yes No
1. Measure, estimate, and calculate physical quantities in practical situations relevant to the adult with increasing responsibilities in life or the workplace?
2. Explore analyse and critique, describe and represent, interpret and justify geometrical relationships and conjectures to solve problems in two and three dimensional geometrical situations?
3. Identify and solve problems in which responses demonstrate that responsible decisions using critical and creative thinking have been made?
4. Work effectively with others when monitoring cost budgets to ensure compliance?
5. Organise and manage oneself and one's activities responsibly and effectively?
6. Collect, analyse, organise and critically evaluate information?
7. Communicate effectively using visual, mathematical and/or language skills in the modes of oral and/or written presentation?
8. Use science and technology effectively and critically, showing responsibility towards the environment and health of others?
9. Demonstrate the world as a set of related systems where the accurate estimation and preparation of cost budgets impacts on the financial success of a project?
10. Be culturally sensitive across a range of social contexts so that all actions and decisions made are acceptable to all stakeholders with broad cultural backgrounds?
Comments about how the learner applied the knowledge and skills in this programme:
Learner Name:
Learner Signature
Date
Facilitator Name:
Facilitator Signature
Date
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 43 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
PRACTICAL / WORKPLACE LOGBOOK
Complete this individually in your classroom / workplace. This logbook has been included to record all the time spent on learning and preparation for the assessment and other activities related to this programme:
Time spent in class (training)
Time spent completing an activity should be signed off by a facilitator / supervisor, mentor or witness where possible.
Time spent applying the new knowledge and skills
The logbook should show that the learner has spent at least 40 hours in acquiring the required knowledge and skills of this programme:
Learner Name:
Learner ID#:
Course ID: FETC Project Management NQF 4: SAQA ID 50080
Unit Standard ID US 9016: Represent, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts; NQF Level 4, 4 Credits
SAQA ID Number 9016 Credits 4 Notional Hours 40 Practical Hours
Practical / Workplace Activities Start Date
End Date
Total No of Hours
Sign Off by Facilitator / Supervisor / Manager / Mentor / Witness
Name & Surname
Relationship to Learner
Signature
Represent, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts
40 Hours
Activities Completed:
Classroom Training
Demonstrate to a colleague how to read scales on the measuring instruments correctly
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 44 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Explain to your supervisor how to estimate quantities to a tolerance justified in the context of the need while reading the above instruments.
Choose the appropriate instrument to measure a particular quantity
Demonstrate to a colleague how to measure quantities correctly to within the least step of the instrument
Select and use appropriate formulae
Carry out calculations correctly and take the least steps of instruments used into account when reporting final values
Use symbols and units in accordance with SI conventions and as appropriate to the situation
Show the properties of the shapes accurately, clearly and completely
Base written descriptions on a systematic analysis of the shapes
Include quantitative information appropriate to the situation and need in your descriptions
Represent 3-dimensional objects by top, front and side views
Adjust different views correctly to describe 3-dimensional objects
Produce and analyse representations, using available and appropriate technology
Do a written analysis on relations of distance and positions between objects from different views
Base written conjectures as appropriate to the situation, on well-planned investigations of geometrical properties
Confirm with your supervisor that the problems are represented comprehensively and in mathematical terms
Analyse and manipulate representations correctly to achieve
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 45 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
results
Other related workplace activities:
FEEDBACK SECTION
Comments from Facilitator:
Comments from Student:
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 46 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Assessment Activities Checklist The learner needs to complete all the required activities that are guided by the Specific Outcomes and Assessment criteria of the Unit Standard(s) in this programme:
Programme LP3: Mathematical Literacy
Unit Standards US 9016: Represent, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts; NQF Level 4, 4 Credits
Once you have completed all the assessment activities, request your supervisor to check that you have completed all the required activities and that they have all been placed in your Portfolio of Evidence, in the following order:
Did the learner provide the required evidence:
Reference: Comments / Feedback Yes No
Formative – Class Activities
Class Activity 1
9016.1.1 9016.1.2 9016.1.3 9016.1.4
Class Activity 2
9016.1.5 9016.1.6 9016.1.7
9016 EEK2 9016 EEK3
Class Activity 3
9016.2.1 9016.2.2 9016.2.3 9016.2.8 9016.2.9
9016.2.10 9016.2.11 9016.2.12
9016 EEK1 9016 EEK4
Class Activity 4
9016.2.4 9016.2.5 9016.2.6 9016.2.7
Reflection 9016
Facilitator Observation Checklist
9016
Summative - Knowledge Questions
Question 1 9016.1.1 9016.1.3
Question 2
9016.1.2 9016.1.4
9016 EEK2
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 47 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
Did the learner provide the required evidence:
Reference: Comments / Feedback Yes No
Question 3 9016.1.5
Question 4
9016.1.6 9016.1.7
9016 EEK1 9016 EEK 3
Question 5 9016.2.1
9016 EEK2
Question 6
9016.2.3 9016.2.9
9016 EEK4
Summative – Practical Activities
Practical Activity
9016 Related EEKs
CCFO1-8
As per the Practical Activity 1 Checklist:
Summative – Witness Testimony
Witness Testimony 9016
Summative – Logbook
Logbook 9016
Learner Name:
Learner Signature
Date
Facilitator Name:
Facilitator Signature
Date
Portfolio of Evidence: Project Management NQF 4: SAQA ID 50080 US 9016
Page 48 of 48
Learner Signature
Date
Project Management - US 9016– Issue 3 – 01-01-2021
FOR STUDENT This is to verify that the above work is my own / authentic. Learner Name: ___________________________Learner Student No:___________________ Learner Signature: ________________________ Date: _____________________________ FOR FACILITATOR File Checked:
This is to verify that the learner has completed all the above and is awaiting final assessment / moderation. Facilitator Name:__________________________ Facilitator Signature________________________Date:______________________________
Date Facilitator Signature