Simulation Report Template

Simulation of matetravlergear

Date: Friday, September 12, 2014Designer: SolidworksStudy name: Static 1Analysis type: Static

Table of ContentsDescription1Assumptions2Model Information2Study Properties3Units4Material Properties4Loads and Fixtures5Connector Definitions5Contact Information6Mesh Information7Sensor Details8Resultant Forces8Beams8Study Results9Conclusion11

DescriptionNo Data

Assumptions

Model Information

Model name: matetravlergearCurrent Configuration: Default

Solid Bodies

Document Name and ReferenceTreated AsVolumetric PropertiesDocument Path/Date Modified

Imported1

Solid BodyMass:24937.8 kgVolume:3.19715 m^3Density:7800 kg/m^3Weight:244390 N

E:\project\RLA\ferri ST\BW\Crawler Travel Gear_Kiripil-1.sldprtSep 05 13:43:20 2014

Imported1

Solid BodyMass:7642.68 kgVolume:0.979831 m^3Density:7800 kg/m^3Weight:74898.3 N

E:\project\RLA\ferri ST\BW\Self Aligning baru-1.sldprtSep 05 13:43:19 2014

Imported1

Solid BodyMass:104636 kgVolume:13.4149 m^3Density:7800 kg/m^3Weight:1.02544e+006 N

E:\project\RLA\ferri ST\BW\Slwe Platform baru-1.sldprtSep 05 13:43:20 2014

Imported1

Solid BodyMass:37406.1 kgVolume:4.79565 m^3Density:7800 kg/m^3Weight:366580 N

E:\project\RLA\ferri ST\BW\crt-1.sldprtSep 05 13:43:19 2014

Study PropertiesStudy nameStatic 1

Analysis typeStatic

Mesh typeSolid Mesh

Thermal Effect: On

Thermal optionInclude temperature loads

Zero strain temperature298 Kelvin

Include fluid pressure effects from SolidWorks Flow SimulationOff

Solver typeFFEPlus

Inplane Effect: Off

Soft Spring: Off

Inertial Relief: Off

Incompatible bonding optionsAutomatic

Large displacementOff

Compute free body forcesOn

FrictionOff

Use Adaptive Method: Off

Result folderSolidWorks document (E:\project\bwtravelinggear)

UnitsUnit system:SI (MKS)

Length/Displacementmm

TemperatureKelvin

Angular velocityRad/sec

Pressure/StressN/m^2

Material PropertiesModel ReferencePropertiesComponents

Name:stm2

Model type:Linear Elastic Isotropic

Default failure criterion:Max von Mises Stress

Yield strength:3.35e+008 N/m^2

Tensile strength:5e+008 N/m^2

Elastic modulus:2e+011 N/m^2

Poisson's ratio:0.2

Mass density:7800 kg/m^3

Shear modulus:3.189e+008 N/m^2

SolidBody 1(Imported1)(Crawler Travel Gear_Kiripil-1-1),SolidBody 1(Imported1)(Self Aligning baru-1-1),SolidBody 1(Imported1)(Slwe Platform baru-1-1),SolidBody 1(Imported1)(crt-1-1)

Curve Data:N/A

Loads and FixturesFixture nameFixture ImageFixture Details

Fixed-1Entities:8 face(s)

Type:Fixed Geometry

Resultant ForcesComponentsXYZResultant

Reaction force(N)269.1061.19803e+006-193.8951.19803e+006

Reaction Moment(N.m)0000

Load nameLoad ImageLoad Details

Force-1Entities:1 face(s)

Type:Apply normal force

Value:1.2e+006 N

Phase Angle:0

Units:deg

Connector DefinitionsNo Data

Contact Information

ContactContact ImageContact Properties

Global ContactType:Bonded

Components:1 component(s)

Options:Compatible mesh

Mesh InformationMesh typeSolid Mesh

Mesher Used: Curvature based mesh

Jacobian points4 Points

Maximum element size0 mm

Minimum element size0 mm

Mesh QualityHigh

Remesh failed parts with incompatible meshOff

Mesh Information - DetailsTotal Nodes59976

Total Elements33906

Maximum Aspect Ratio111.45

% of elements with Aspect Ratio < 366.4

% of elements with Aspect Ratio > 107.23

% of distorted elements(Jacobian)0

Time to complete mesh(hh;mm;ss): 00:00:30

Computer name: IHSAN

Sensor DetailsNo Data

Resultant ForcesReaction ForcesSelection setUnitsSum XSum YSum ZResultant

Entire ModelN269.1061.19803e+006-193.8951.19803e+006

Reaction MomentsSelection setUnitsSum XSum YSum ZResultant

Entire ModelN.m0000

BeamsNo Data

Study Results

NameTypeMinMax

Stress1VON: von Mises Stress0 N/m^2Node: 12.58039e+008 N/m^2Node: 42542

matetravlergear-Static 1-Stress-Stress1

NameTypeMinMax

Displacement1URES: Resultant Displacement0 mmNode: 11.70236 mmNode: 22198

matetravlergear-Static 1-Displacement-Displacement1

NameTypeMinMax

Strain1ESTRN: Equivalent Strain0 Element: 10.000581059 Element: 24939

matetravlergear-Static 1-Strain-Strain1

Image-1

Conclusion

Analyzed with SolidWorks SimulationSimulation of matetravlergear1

Analyzed with SolidWorks SimulationSimulation of matetravlergear11