Post on 14-Apr-2018
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 1/23
Part No. Part Name Part No. Part Name
1 Ply Wood (Sheeting) 5 Vertical standard
2 Secondary H20 beam 6 ledger
3 Primary H20 beam 7 Adjustable base jack
4 Adjustable U-head jack 8 Nail
M-Cuplock System (FALSE- WORK)
Primary H20 Beams and Secondary H20 Beams
Sketches Applications
1
2
4
5
6
3
8
7
H20
Nail
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 2/23
Part No. Part Name Part No. Part Name
1 Ply Wood (Sheeting) 5 Vertical standard
2 Secondary timber beam 6 ledger
3 Primary H20 beam 7 Adjustable base jack
4 Adjustable U-head jack
-Cuplock System (FALSE WORK)
Sketches Applications
Primary H20 Beams and Secondary Timber Beams
1
2
4
5
6
3
7
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 3/23
Part No. Part Name Part No. Part Name
1 Ply Wood (Sheeting) 5 Vertical standard
2 Secondary timber beam 6 ledger
3 Primary timber beam 7 Adjustable base jack
4 Adjustable U-head jack
M-Cuplock System (FALSE WORK)
Sketches Application
Primary timber Beams and Secondary Timber Beams
1
2
4
5
6
3
7
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 4/23
Part No. Part Name Part No. Part Name
1 Ply Wood (Sheeting) 5 Vertical standard
2 Secondary aluminum beam 6 ledger
3 Primary aluminum beam 7 Adjustable base jack
4 Adjustable U-head jack
M-Cuplock System (FALSE WORK)
Sketches Application
Primary Aluminum and Secondary Aluminum Beam
1
2
4
5
6
3
7
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 5/23
Part No. Part Name Part No. Part Name
1 Ply Wood (Sheeting) 5 Vertical standard
2 Secondary timber beam 6 ledger
3 Primary aluminum beam 7 Adjustable base jack
4 Adjustable U-head jack
M-Cuplock System (FALSE WORK)
Sketches Application
Primary Aluminum Beam and Secondary Timber Beam
1
2
4
5
6
3
7
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 6/23
M-Cuplock System (FALSE WORK)
Round Spigot
Sketches Applicatio
Round spigot
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 7/23
Part No. Part Name Part No. Part Name
1 Beam bracket 2 Double cantilever
M-Cuplock System (FALSE WORK)
M-Cuplock with Double Beam Bracket and Beam Bracket
Sketches Applications
12
Beams
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 8/23
`
M-Cuplock System (FALSE WORK)
Main Features
Ply wood
condary H20 Beam
Primary H20 Beam
Adjustable U-Head
Standard
Ledger
djustable Base Jack
Nail
H20
Upper cup
Lower cup
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 9/23
Grade 37 Grade 44
Code Code Length(L) Weight
1000mm
1500mm
2000mm
2500mm
3000mm
Grade 37 Grade 44
Code Code Length(L) Weight
1000mm
1500mm
2000mm
2500mm
3000mm
M-Cuplock System (FALSE - WORK)
Standard Component
M-Cuplock Standard
420mm
500mm
80mm
500mm
500mm
500mm
500mm
D 48.3mm-TH 3mm- Grade 44 and Grade 37
Vertical StandardsThere are five basic sizes of Vertical Standards within range shown inthe previous table.Vertical Standards are manufactured from 48.3 mm O.D. tube. TheseStandards are used in conjunction together to achieve the height of theformwork support by internal spigots which are provided at the top of each Standard to make vertical connections.
Verticals incorporate lower fixed cups set 500mm intervals.Captive rotating cups secure up to 4 components.The lowest bottom cup joint is 80mm from the base of the vertical togive the system improved structural strength.
L (mm)
D 48.3mm-TH 3.2mm- Grade 44 and Grade 37
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 10/23
``1
Code Length
(L)
Eff. Length
(Le)
Weight
600mm 551.7mm
850mm 801.7mm
900mm 851.7mm
1000mm 951.7mm
1200mm 1151.7mm1250mm 1201.7mm
1600mm 1551.7mm
1800mm 1751.7mm
2500mm 2451.7mm
-Cuplock System (FALSE - WORK)
Standard Components
M-Cuplock ledger
LedgersM-CUPLOCK Ledgers are used as the main horizontal connecting members for the MCUPLOCK support system.
The Ledgers are manufactured from 48.3 mm O.D. tube with forged steel blades endwhich locate into bottom cups of the Standards and are locked in place by thecorresponding top cups.Ledgers are available in various lengths to provide the desired grid dimension whenused with M-CUPLOCK Standards for formwork support.
L (mm)
Le(mm)
Forged steel
blades ends
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 11/23
Code Length(L) Weight
660mm
760mm
860mm
Code Length (L) Weight
660mm
760mm
860mm
Code Length(L) Weight
660mm760mm
860mm
M-Cuplock System ( FALSE - WORK)
M- Adjustable Base jack Hollow Type A
M- Adjustable Base jack Solid
Accessories Compon
M- Adjustable Base jack Hollow Type B
ɸ34mm
L (m
ɸ 13 mm
ɸ 38/4 mm
ɸ 9 mm
Adjustable Base jack The M-CUPLOCK Adjustable Base provides adjustment for the baseStandard. It fits directly into the Standard. Adjustable Base jack ismade up of steel plate, screw jack and steel handle
150mm 150mm
Steel Plate
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 12/23
Adjustable U-head jackhe U-Heads are inserted into the top of the vertical standardsdjustable U-Head is made up of a “U” shape steel plate, screw jacknd steel handle
Code Length(L) Weight
660mm
760mm
860mm
Code Length (L) Weight
660mm
760mm
860mm
M- Adjustable U-head Jack Solid
M- Adjustable U-Head Jack Hollow
M-Cuplock System (FALSE - WORK)
Accessories Component
L (mm)
ɸ 38/4 mm
ɸ34mm
150m
ɸ6mm
170mm
90mm
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 13/23
Code Length(L) Weight
660mm
760mm
860mm
Code Length(L) Weight
660mm
760mm
860mm
Code Length L Weight
150mm
M-Cuplock System ( FALSE - WORK)
M- Adjustable Universal Jack Hollow
M- Base Plate
M- Adjustable Universal Jack Solid
Accessories Compone
150mm150mm
L (mm)
ɸ34mm
ɸ 38/4 mm
L (mm)ɸ14 mm
Base Platehe M-CUPLOCK Base plate providing a flat bearing
urface for distributing applying load.
Φ 25mm
Flat Beari
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 14/23
Code Length(L) Weight
295mm
Code Length Weight150mm
M-Cuplock System (FALSE - WORK)
M - Spigots
Square Tube Spigot
Round Tube Spigot
Accessories Components
ɸ 41 mm
ɸ 16 mm
Bolt M9.9*76mm
L (mm)
1 1 5 m m
Square 30*30 mm
L (mm)
Spigoto joint one standard to another coaxially. Bolt placedansversely through the spigot and the standard to prevent
he spigot and from pulling out of the tube.
1 1 5 m m
Bolt M14*80mm
Spigot with two holes Spigot with one
ɸ 35 mm
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 15/23
M-Cuplock System (FALSE - WORK)
M- Beam Bracket
M- Cantilever Frame
1000mm
1500mm
1200mm
Accessories Compon
ɸ40mm
1500mm
Beam bracketTo shutter internal beams with needed dimension andtransfer the applied load by locating on to slab supportvertical standard.
Cantilever frameor supporting the formwork beyond the externaleriphery of the slab. The frames have blade ends
for locating in the cup joint with lifting 1.50m & acceptdjustable jacks in three positions of 1.2m,1.25m,1.30m.
1250mm
1300mm
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 16/23
.
Code Length (A/B) Weight700/390
700/600
M-Cuplock System (FALSE - WORK)
M- Double cantilever
Accessories Compon
A(mm)
B(mm)
Double cantileverTo shutter outer beams with needed dimension and transfer
the applied load by locating on to slab support vertical
standard
1000mm
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 17/23
Code Length(L) Weight
2450mm
2900mm
3900mm
4900mm
5900mm
M-Cuplock System (FALSE - WORK)
Accessories Compone
H20 Beam
H20 Beam
The H20 formwork timber beam is a solid I-beam used for concrete formwork construction.The height of beam is 200mm and available in different standardlengthsThe webs made of 3 ply laminated solid wood panels ensuringhigh carrying capacity for continuous use in all climate zone.The chords are made of superior quality smoothly surfaced andslightly chamfered.
H20 beams properties:
Technical Specifications1-Permissible modulus M (t.m)=0.502- Permissible shear forceQ (t)=1.103- Section modulus (z) = 461 cm
3
4- Geometrical moment oh inertia (I) = 4613 cm4
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 18/23
Light Heavy
Code Code Length(L) Weight
1000mm
2000mm
3000mm
4000mm
5000mm
Aluminum Beam
Wood 42*40 mm
M-Cuplock System (FALSE - WORK)
Accessories Componen
L (mm)
1
Li ht aluminum Heav aluminum
80mm
M-Aluminum BeamM-Aluminum beams combine the benefits of strength, lightness and ease handlingwith consistency, versatility and exceptional durability. M-Aluminum beamsmanufactured from high grade alloy (ALLOY 6082). Available in two standardsections.
M-Aluminum beams properties:1- Light section 2- Heavy section
Technical Specifications Technical Specifications1-Permissible modulus (M)=0.77(t.m) 1-Permissible modulus M =0.86(t.m)
2-Permissible shear force (t) =4.70 KN 2-Permissible shear force (t) =4.00 KN3- Section modulus (z) =51.7 cm
33- Section modulus (z) =57.98 cm
3
4- Geometrical moment oh inertia (I) =389.7 cm44- Geometrical moment oh inertia (I) =469.66 cm
4
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 19/23
M-Cuplock System (FALSE - WORK)
Accessories Component
Couplers
Right angle coupler forged Right angle coupler
Swivel coupler forged Swivel coupler pressed
Size: 42mm&48
Min Slip Load: 15KN
Min Distortion Load: 30KN
Size: 42mm
Min Slip Load 8KN
Min Distortion Load: 20KN
Size: 48mm
Min Slip Load 8.5KN
Min Distortion Load: 17KN
Size: 48mm
Min Slip Load: 10KN
Min Distortion Load: 20KN
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 20/23
M-Cuplock System (FALSE - WORK)
Technical data
-These graphs give Maximum permissible Load for the adjustable jack which are
erected plumb and loaded concentrically by main beam- These graphs shown the max extension length of adjustable jacks as following:-
Maximum permissible loading on adjustable jack depends on jack extension (A)the following graphs shown the max Maximum permissible load on the adjustable jack solid and th
adjustable jack hollow according to (ECP 205-2001)
The distance (B) at least 1/3 (A)
B ≥ 1/3 A
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 21/23
˂
M-Cuplock System (FALSE - WORK)
Technical data
Unbraced length
Maximum permissible loading on cuplock standard Maximum permissible loading oncuplock standard dependsonTheunbraced of standard (Lift distance) and the maximum bay
size. the following graphs shown the max Maximum permissible load on the cuplock standard with different steel grades and wall thickness of tubes according to (ECP 2052001)
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 22/23
M-Cuplock System (FALSE - WORK)
Technical data
-These graphs give Maximum permissible Load for internal Standards which are erected plumb,
loaded concentrically and effectively braced in the major directions.
-For external Standards reduce Working Load Limits by 15%.
7/30/2019 MANAR ALOMRAN
http://slidepdf.com/reader/full/manar-alomran 23/23
Part No. Part Name Part No. Part Name
1 Sheeting
M-Cuplock System (FALSE WORK)
Sketches Application
1
Primary and Secondary Beams With Sheeting