MAGNETIC PARTICLE POWDER APPLICATOR

DATA SHEET

Magnetic Particle Powder Applicators are used to blow (or “Pu�”) colour contrast or �uorescent particles onto the magnetised test surface.

PM/GSA/CORP-017.01.001.01 Digital\03 Brochures-Data-Maint-Ops-Manuals\Data Sheets\Magnetic particle Powder Applicator\2 WIP\Rev0

Features

MAGNETIC PARTICLE APPLICATOR - DATA SHEET

Made of real rubber and not vinyl or plastics that break down

and lose their elasticity.

The spray end is metal treated to never rust nor magnetize

which would cause it to clog with powder

Optional Accessories

Magnetic Powders

Gammatec NDT Supplies SOC Ltd Reg No. 1981/001355/30. A subsidiary of NTP Radioisotopes.Head Office Building, Vision 21 Industrial Park, Steel Road, Peacehaven, Vereeniging. PO Box 264786 Three Rivers 1935, South Africa.

Tel: +27 16 423 7731, Fax: +27 16 423 1743, Email: info@gammatecsa.com, Web: www.gammatecsa.com

PM/GSA/CORP-017.01.001.01 Digital\03 Brochures-Data-Maint-Ops-Manuals\Data Sheets\Magnetic particle Powder Applicator\2 WIP\Rev0