Post on 15-Aug-2015
Mohamed Ibrahim Mohamed Shaheen
Email : mohamedshahen85@yahoo.com
Cellular : 0097450448377- 0097455385942
Marital status : married
Nationality : Egyptian
Date of Birth : 1/10/1985
Military Service : Exemption
Driving license : Valid
Seeking a challenging position where my academic backgrounds and interpersonal skills can
be utilized and developed and to play a senior role in office management in a multinational or
major local organization.
> Collage University of Cairo – Faculty of Engineering, Bachelor of Science in Metallurgical
Engineering, May 2008.
Graduation Project University of Cairo – Faculty of Engineering, Welding of Duplex Stainless Steels.
Project Grade: v.good.
> Diploma
Diploma of welding International Welding Engineer (IWE) by: Central of Metallurgical Research and Development Institute, CMRDI as IIW-
Approved Training Body. Schweißtechnische Zentralanstalt, SZA – Austria as IIW-Authorized National
Body. That I am having met the education and training requirements of IIW guideline ‘international
welding engineer’ and by examinations having satisfied the requirements of the examination
board of the IIW authorized national body.
Certificate date: February 12, 2009. Certificate No: 0695.
Education
CAREER OBJECTIVE
1. AUTHORIZED ABOVE GROUND STORAGE TANK INSPECTOR API 653 certification No 50941.
2. AUTHORIZED PRESSURE VESSEL INSPECTOR API 510 certification No 51420.
3. Certified Welding Inspector CWI account NO 693512.
4. Non-Destructive Testing (NDT) courses according to ASNT SNT-TC-1A 1996:
Level II Visual and Optical Testing (VT)
Level II Ultrasonic Testing (UT)
Level II Radiographic Testing (RT)
Level II Liquid Penetrant Testing (PT)
Level II Magnetic Particle Testing (MT)
5. International Computer Driving License (ICDL)
1- Company Name : DNV GL
From : 01/2014 Till: NOW
Job Title : Senior Inspector Activities:
Working as Third Party Inspector for the project Rehabilitation of 83
storage tanks, Spheres & Bullets in Qatar Petroleum refinery at Mesaieed.
2- Company Name: Egyptian Maintenance Company (EMC)
From : 05/2009 Till: Now
Job Title : QA/QC and Welding Engineer
Projects
Inspection activities for Tamooh warehouse
Client: Petroleum Cooperative Society Co(CO-OP).
Contractor : Egyptian Maintenance Co (E.M.C).
Position : Project manager.
Period : from 5/9/2014 till 25/11/2014.
Activities
Managing & Supervision for all activities (mechanical work& inspection activities)
Make technical and commircial offer for all project activities.
Agreeing project objectives.
EMPLOYMENT HISTORY
Certifications
Representing the client's interests.
Organizing the various activities as(scaffolding work, cleaning, inspection
activities, judgment for (five tanks, all warehouse pipelines(product&firefighting)
and three vessels condition) and make assessment report for all activities).
making sure that all the aims of the project are met.
making sure the quality standards are met.
Inspection activities for diesel storage tank 5000m3 at Mostorod warehouse
Client: Petroleum Cooperative Society Co(CO-OP).
Contractor : Egyptian Maintenance Co (E.M.C).
Position : Project manager.
Period : from 5/7/2014 till 3/8/2014.
Activities
Managing & Supervision for all activities (mechanical work& inspection activities)
Make technical and commircial offer for all project activities.
Agreeing project objectives.
Representing the client's interests.
Organizing the various activities as(sand plasting, cleaning, inspection activities,
judgment for the tank's whole condition and make assessment report for the tank).
making sure that all the aims of the project are met.
making sure the quality standard API 653 are met.
Continuous Service Agreement (maintenance contract between E.M.C
&P.T.B)
Client: Belayim petroleum Co (P.TB) ( Abu Rudies District ) .
Contractor : Egyptian Maintenance Co (E.M.C).
Position : QA/QC head Engineer.
Period : from 15/3/2014 till 1/7/2014.
Activities
Managing & Supervision all (Q.C & NDT) activities in the different following projects
(in parallel).
Maintenance & Inspection of tank -3 (fixed roof type) at fieran terminal .
fabrication & Erection of 28 `` emergency gas line at petreco plant.
Fire proofing for spherical tank 2001 steel structure , legs & vessel supports at
(L.P.G plant).
Fabrication of new production manifold at E.M.C W/S.
Inspection & maintenance of two crude oil storage tanks S7&S8 (103,000
M³ floating roof type) and make evaluation for suitability for Diesel storing
service.
Client: Arab petroleum pipelines co ( SUMED).
Contractor : Egyptian Maintenance Co (E.M.C).
Position : QA/QC team leader.
Period : from 19/8/2013 till 1/3/2014
Activities
Prepare preliminary report for the tank bottom based on floor mapping report .
Supervision &managing all the inspection activities during maintenance through the whole
tank in accordance with (API 653,650, ASME IX) such as.
Preparing Inspection and Test Plan (ITP).
Managing & supervision all the NDT activities ,interpretation & final evaluation.
Welders testing & qualification.
Welds` repairs according to repair procedure approved by the jurisdiction authority.
Monitoring & supervision all alteration activities such as annular plates , bottom plates
replacement and pontoons repairs.
Visual inspection & corrosion evaluation for all the appurtenances for diesel storing.
Thickness surveying for bottom plates ,shell ,cooling ring .
Monitoring hydrostatic testing of tanks after the final maintenance activities.
Finishing the whole inspection file of tanks including all types of reports
&documentation
Install new inlet&outlet lines for the new stored product.
Install new Diesel fuel station .
Inspection & maintenance of two crude oil storage tanks S3, S4, S11and
S23 (103,000 M³ floating roof type).
Client: Arab petroleum pipelines co ( SUMED).
Contractor : Egyptian Maintenance Co (E.M.C).
Position : QA/QC team leader.
Period : from 20/10/2012 till 15/8/2013
Activities
Prepare preliminary report for the tank bottom based on floor mapping report .
Supervision &managing all the inspection activities during
1. Demolition of all bottom plates and install new bottom.
2. Control repair actions for defected roof pontoons as by pit welding,
Overlay welding, or lap patching, followed by inspection and testing for roof pontoons.
Inspection & maintenance of crude oil storage tank bottom (demolish &new
construction) (floating roof type).
Client: (SUCO).
Contractor : Egyptian Maintenance Co (E.M.C).
Position : QA/QC team leader.
Period : from 1/8/2011 till 20/11/2011
Inspection & maintenance in Offshore Department (Period : from
28/2/2011 till 17/7/2011) A . Inspection & maintenance of two Plateforms (AMER 5& GHAREB 4 Platforms)
Client: General Petrulium Company (GPC) .
Contractor : Egyptian Maintenance Co (E.M.C).
Position : QA/QC team leader.
B . New fabrications of two boat lands at AL-HAMD Platform
Client: General Petrulium Company (GPC) .
Contractor : Egyptian Maintenance Co (E.M.C).
Position : QA/QC Engineer.
New construction of 8 water, 8 Sulfuric Acid and 10 phosphoric Acid tanks
according to API 650.
Client: Desmet ballestra owner NCIC .
Contractor : Egyptian Maintenance Co (E.M.C).
Position : QA/QC team leader.
Period : from 21/4/2010 till 11/2/2011.
New construction of two Crude Oil tanks 5000m3 according to API 650.
Client: MERLON Petrulum Company.
Contractor : Egyptian Maintenance Co (E.M.C).
Position : QA/QC team leader.
Period : from 5/1/2010 till 19/4/2010.
New Construction of fire fighting station(pipe line &storage tank)
Client: General Petroleum Company (GPC)
Contractor : Egyptian Maintenance Co (E.M.C)
Position : QA/QC Engineer.
Period : from 15/9/2009 till 20/12/2009.
Activities
Review of drawing.
Establish welding procedures specification (WPS's) Qualify of the WPS's by
preparing (PQR) in accordance to ASME IX .
Testing of the welders .
Establish inspection and test plane (ITP) .
Apply and Evaluate of non-destructive tests and results of material and welding in
accordance to API 650 and ASME V .
Supervision of NDT, Fitup,welding activities and heat treatment process.
Review, follow up and preparing the quality control documents for the whole project.
Inspection engineer ( before maintenance inspection) floor mapping using
MFL devise in some jops as:
1.
Client: Suiz Oil Company (SUCO)
Contractor : Egyptian Maintenance Co (E.M.C)
Position : Inspection Engineer.
Period : from 15/9/2010 till 2/10/2010.
2.
Client: Rashid Petroleum Company (RASHPETCO)
Contractor : Egyptian Maintenance Co (E.M.C)
Position : Inspection Engineer.
Period : from 5/9/2012 till 12/10/2012.
3.
Client: MEDOR
Contractor : Egyptian Maintenance Co (E.M.C)
Position : Inspection Engineer.
Period : from 4/6/2014 till 13/6/2014.
4.
Client: Rashid Petroleum Company (RASHPETCO)
Contractor : Egyptian Maintenance Co (E.M.C)
Position : Inspection Engineer.
Period : from 12/7/2014 till 20/7/2014.
3. Company Name: National Steel Fabrication (NSF)
From : 01/2009 until 04/2009
Job Title : Quality Control Engineer Quality control engineer in seven pressure vessels for FLAGSOOL CO, plate works.
-Responsibilities Include but not limited to the following:
Audit or review modifications of project documents and related materials and
provides guidance to persons whose activities affect quality.
Preparing of required WPS,PQR,WPQ,ITP &repair procedure
Preparing required procedure for inspection of piping, pressure vessels, tanks, spheres,
heaters, air coolers…etc.
Calculating of corrosion rate, remaining life& inspection interval for inspected
equipments or piping
Preparing technical reports and documentation of inspected items.
Dealing with the Following Codes and Standards:
ASME Code Sec IX , ASME Code Sec V , ASME Code Sec VIII div. 1 ,
ASME Code Sec II, ASME Code B31.3 / B31.1.
DIN Standards.
AWS D 1.1 Code.
API 650, API 653, API 1104, API 572, API 574, API 571, API 570, API 578, API
579.
ASTM&NACE.
Language Skills: Arabic: As the primary native language (the mother tongue)
English: Very good command in reading, writing, listening and speaking
Individual Skills: Ambitious, self-motivated hard worker.
Can be adjusted to any circumstances.
Working under pressure as the project enforced me to work to a deadline.
Very responsible, helpful and good listener.
Self-learning.
Skills
Another working Responsibilities