Post on 29-Dec-2015
description
RN31672EN40GLA1
Parameter Configuration
1
RN31672EN40GLA1
Parameter Configuration
2
RN31672EN40GLA1
Parameter Configuration
3
Dashed boxes are related to optional features
RN31672EN40GLA1
Parameter Configuration
4
Dashed boxes are related to optional features
RN31672EN40GLA1
Parameter Configuration
5
RN31672EN40GLA1
Parameter Configuration
6
RN31672EN40GLA1
Parameter Configuration
7
RN31672EN40GLA1
Parameter Configuration
8
RN31672EN40GLA1
Parameter Configuration
9
RN31672EN40GLA1
Parameter Configuration
10
RN31672EN40GLA1
Parameter Configuration
11
RN31672EN40GLA1
Parameter Configuration
12
RN31672EN40GLA1
Parameter Configuration
13
RN31672EN40GLA1
Parameter Configuration
14
RN31672EN40GLA1
Parameter Configuration
15
If feature RAN1191: “Detected Set Reporting (DSR) & Measurements” is enabled, specific counters (M1028 Autodef SHO DSR measurement) can be used to find detected set cells that are reported by the UE but that are not in the ADJS or ADJD adjacency lists and cannot therefore be targets of SHO. With that information the neighbor lists can be optimized to include such cells that would be good handover targets.
The parameter DSRepBasedSHO indicates whether the DSR based SHO is enabled in the cell.
When the Detected Set Reporting & Measurements feature (optional) is enabled in the RNC, the parameter can have the following values::
0: DSR is not allowed.
1: DSR is enabled but SHO to detected cell is not allowed.
When the SHO based on the Detected Set Reporting feature (optional) is enabled in the RNC, the parameter can have the following values:
0: DSR is not allowed.
2: DSR based SHO is enabled.
RN31672EN40GLA1
Parameter Configuration
16
RN31672EN40GLA1
Parameter Configuration
17
RN31672EN40GLA1
Parameter Configuration
18
RN31672EN40GLA1
Parameter Configuration
19
RN31672EN40GLA1
Parameter Configuration
20
RN31672EN40GLA1
Parameter Configuration
21
RN31672EN40GLA1
Parameter Configuration
22
RN31672EN40GLA1
Parameter Configuration
23
RN31672EN40GLA1
Parameter Configuration
24
RN31672EN40GLA1
Parameter Configuration
25
RN31672EN40GLA1
Parameter Configuration
26
RN31672EN40GLA1
Parameter Configuration
27
RN31672EN40GLA1
Parameter Configuration
28
RN31672EN40GLA1
Parameter Configuration
29
RN31672EN40GLA1
Parameter Configuration
30
RN31672EN40GLA1
Parameter Configuration
31
RN31672EN40GLA1
Parameter Configuration
32
RN31672EN40GLA1
Parameter Configuration
33
RN31672EN40GLA1
Parameter Configuration
34
RN31672EN40GLA1
Parameter Configuration
35
RN31672EN40GLA1
Parameter Configuration
36
RN31672EN40GLA1
Parameter Configuration
37
RN31672EN40GLA1
Parameter Configuration
38