Post on 06-Aug-2020
Loom Crafts S T Y L E Y O U R L I F E S T Y L E
T E A K O U T D O O R F U R N I T U R E
Loom Crafts has associated the world over with
outdoor leisure furniture that strikes the highest
notes in quality and style. We are a company that
specializes in the manufacture of Synthetic wicker
outdoor furniture to which we have now added Teak
wood outdoor furniture with stainless steel and
aluminium.
The pages of this catalogue present our widest ever
choice of contemporary and traditional designs for
the outdoor room. Our designers have combined
pleasing designs with ergonomic performance to
create furniture that opens life outdoors to a world
of stylish possibilities.
Through our commitment to produce the world’s
finest outdoor leisure furniture, we remain at the
forefront of this rapidly changing industry and
continue to demonstrate the best in design and
manufacturing expertise.
Thank you for choosing Loom Crafts and be assured
that our customer service and after care match the
excellence of our furniture. We proudly welcome
you into the elite group of owners of our furniture
and look forward to being of service to you.
armchairs ● seats ● dining tables ● sun loungers ● coffee tables ● chairs ● bar stools & tables ● sofa
Loom Crafts uses first grade plantation
grown teakwood, obtained from the most
reputable, legal source in India.
With time, teak acquires a silver grey patina
that complements any outdoor setting.
The high oil content of the teakwood used in
our furniture enables it to withstand the
harshest weather conditions with a mini-
mum of maintenance. Teak is very stable and
resistant to rot, which has made it the first
choice for marine and outdoor use over the
centuries.
We use two grades of stainless steel; 316
Grade, commonly known as ‘marine grade’
and 304 Grade, more commonly used for gar-
den furniture.
Both 316 and 304 are hardwearing and suit-
able for use in inland locations whilst 316 is
for use in coastal areas, marine and heavily
chlorinated environments, where oxidation
could be a problem.
You should note that all outdoor furniture,
including stainless steel, requires some main-
tenance.
If you have any questions or concerns about
the grade that is best for your area, then
please contact your supplier or our customer
service department.
For our aluminium furniture, we use ‘virgin
aluminium,’ which means it is not reclaimed
and is stronger and longer lasting as a con-
sequence.
We chemically clean the aluminium and
then powder-coat it to prevent oxidation
and to ensure it gives long service with the
minimum of maintenance.
Materials
Like all of our products, these Arm Chairs went through numerous
iterations which were relentlessly tested against all body types. Once
finalized, the design was then tested in different scenarios to ensure
that the chair will stand up to anything our customer’s needs may
present and more. These Arm Chairs features relaxed proportions and
an ethereal design for the best in style and comfort. When paired with
a Cushion the owner can sit and relax for hours.
LCOT-001D
LCOT-001D
LCOT-001D
LCOT-001D
With a low, wide stance, these lounge chair can
accommodate hours of relaxation. It is the perfect
vehicle for reading a book in the shade, lounging
poolside or an all night conversation among friends.
We approached these Lounge Chair the same way we do
all of our seats – through months of prototyping, testing
and refinement. When accompanied by one of our sleek
knife edge cushions or our thicker classic box cushion
this chair perfectly exemplifies modern comfort.
LCOT-001L
These Bar Stool is the widest, most generously proportioned
modern seat currently on the market. At around 20 inches
wide, it can be enjoyed by one or shared by two.
A knife edge cushion is also available for these Bar Stool.
LCOT-001B
LCOT-001B
Our oversized Chaise Lounge is by far the most highly engineered piece within this Collection. The seating surface is comprised of forty four hand-picked boards, each of
which are individually planed, sanded and finished by hand in our studio. The outer frame and backrest support is cut, machined and hand polished before being welded
together by our craftsmen. We also CNC machine all of the aluminum parts, including the wheel assembly and backrest position-set in our studio before being sent to
our local powder coater.
With four adjustable positions including flat, these Chaise is accommodating whether you are reading, sleeping or enjoying a refreshing poolside drink. Utilizing a low
stance, a very generous width, and the type of sophisticated restraint you would expect from a modern classic, these Chaise Lounge can be enjoyed for hours and
admired for decades.
LCOT-001S
LCOT-001S
LCOT-001S
LCOT-002D
LCOT-002D
LCOT-002D
LCOT-002D
LCOT-002L
LCOT-002L
LCOT-002S
LCOT-002S
LCOT-003D
LCOT-003D
LCOT-004D
LCOT-004B
LCOT-004B
LCOT-004D
LCOT-005D
LCOT-005D
LCOT-005B
LCOT-005S
LCOT-005S
LCOT-006D
LCOT-006D
LCOT-006L
LCOT-006S
LCOT-007D
LCOT-007D
LCOT-007S
LCOT-008D
LCOT-008D
LCOT-008L
LCOT-008L
LCOT-009D
LCOT-009L
LCOT-010D
LCOT-010L
LCOT-010S
LCOT-011S
LCOT-011S
LCOT-012S
LCOT-013S
Loom Cra f t s S T Y L E Y O U R L I F E S T Y L E
www.loomcrafts.com | info@loomcrafts.com