Post on 25-May-2018
11300 306 204metalcorp.com.au 1300 306 204
Your rural steel expert!
Livestock handling & farm products range
2016 CATALOGUE - NSW EDITION
31300 306 204
Metalcorp supplies a wide range of quality rural farm products such as fencing and stock handling equipment.
We also supply a range of steel for building and fabrication. Metalcorp know how important it is to go
the extra mile to support our customers – both farming and commercial – in regional Australia. We listen
carefully to our customer’s feedback to improve the service we deliver.
LIVESTOCK HANDLING & FARM PRODUCTS RANGE
2016 CATALOGUE
4 www.metalcorp.com.au
BULLOCKMASTER® Crush
CATTLEMASTER® Crush
Features:• Easy to use parallel squeeze holds animals secure and
minimize movement• Infinite lock on headbail, locks in any position• Long ratchet rump bar, anti-backing mechanism • Full walk through vet cage, with foot operated vet door for easy access • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Simple to operate and release chin bar with infinite adjustment • Needle gate
Features:• Easy to use single sided parallel squeeze holds animals
secure and minimises movement• Infinite lock on headbail, locks in any position• Long ratchet rump bar, anti-backing mechanism • Full walk through vet cage, with foot operated vet door for easy access • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Simple to operate and release chin bar with infinite adjustment • Needle gate
Features:• Easy to use diagonal side squeeze, to assist with
immobilisation of cattle • Infinite lock on headbail, locks in any position• Long ratchet rump bar, anti-backing mechanism • Full walk through vet cage, with foot operated vet door for easy access • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Simple to operate and release chin bar with infinite adjustment • Needle gate• Split gates on both sides for maximum access
CLASSIC PLUS® CrushTop of the range heavy duty crush with full vet facilities. Designed to completely immobilise cattle quickly and efficiently, with a double sided parallel squeeze keeping safety top of mind.
Top of the range heavy duty crush with full vet facilities. Designed to completely immobilise cattle quickly and efficiently, with a single sided parallel squeeze keeping safety top of mind.
The CATTLEMASTER® is one of our most popular crushes, a genuine all-rounder with heavy duty construction.
DIMENSIONS: 3437mm (L) x 1310mm (W) x 2370mm (H) INTERNAL: 750mm WEIGHT: 712kg PRODUCT NUMBER: 143333
DIMENSIONS: 3437mm (L) x 1310mm (W) x 2370mm (H) INTERNAL: 750mm WEIGHT: 688kg PRODUCT NUMBER: 175630
DIMENSIONS: 3470mm (L) x 1370mm (W) x 2350mm (H) INTERNAL: 750mm WEIGHT: 590kg PRODUCT NUMBER: 155761
CATTLE CRUSH RANGE
51300 306 204
FARMHAND® Headbail
Features:• Easy to use diagonal side squeeze to assist with
immobilisation of cattle • Infinite lock on headbail, locks in any position• Long ratchet rump bar, anti-backing mechanism • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Simple to operate and release chin bar with infinite adjustment • Needle gate
Features:• Infinite lock on headbail, locks in any position• Drop-away operating handle • Simple to operate and release chin bar with infinite adjustment • Available in near side and off side • Triple protection, enamel coating, super etch undercoat, galvanised
construction
FARMHAND® CrushThe FARMHAND® is an excellent heavy duty crush that is suited for most applications. This crush is designed for producers who do not need to engage in complicated vet practices.
The FARMHAND® Headbail is our most popular heavy duty headbail. Offering the same strength, quality and security as our top-of-the-range crushes.
DIMENSIONS: 2550mm (L) x 1370mm (W) x 2350mm (H) WEIGHT: 400kg PRODUCT NUMBER: 150715
DIMENSIONS: 1310mm (W) x 2370mm (H) WEIGHT: 250kg PRODUCT NUMBER: 155760
METALCORP CATTLE CRUSH OPTIONAL EXTRAS
Optional features:• Rear operation kit available
OR
ROOF KITBAULK GATE GALVANISED FLOORCHIN SCOOP
PRODUCT NUMBER: 172396
PRODUCT NUMBER: 195536
PRODUCT NUMBER: 215234
PRODUCT NUMBER: 186708
CATTLE CRUSH RANGE
6 www.metalcorp.com.au
With Metalcorp’s nation wide footprint we can arrange delivery of all your farm needs no matter where you might be.
HOBBYMASTER® Crush
HOBBYMASTER® Headbail We can arrange delivery
Features:• Infinite lock on headbail, locks in any position• Full walk through vet cage, with foot operated vet door for easy access • Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Drop-away handles can be operated independently from front or back
while other handle remains safely disengaged • Simple to operate and release chin bar with infinite adjustment • Split gates on both sides for maximum access
Features:• Infinite lock on headbail, locks in any position• Internal vet access gate in rear slide gate• Telescopic sliding gate track does not protrude into work area• Fully sheeted operational gates and all lower working gates• Drop-away handles can be operated independently from front or back while other
handle remains safely disengaged • Simple to operate and release chin bar with infinite adjustment • Split gates on both sides for maximum access
Features:• Infinite lock on headbail, locks in
any position• Drop-away operating handle • Available in near side and off side • Manufactured from high quality,
Australian made galvanised steel
HOBBYMASTER® Vet CrushThe HOBBYMASTER® Vet is our leading economy Vet crush, loaded with key features to suit all veterinarian requirements.
The HOBBYMASTER® is our most popular economy crush, loaded with key features without compromising on strength or durability.
The HOBBYMASTER® Headbail is our leading economy headbail. Suitable for general purpose cattle restraint.
DIMENSIONS: 3280mm (L) x 1310mm (W) x 2288mm (H) WEIGHT: 390kg PRODUCT NUMBER: 203981
DIMENSIONS: 2505mm (L) x 1310mm (W) x 2288mm (H) WEIGHT: 320kg PRODUCT NUMBER: 181598
DIMENSIONS: 1310mm (W) x 2288mm (H) WEIGHT: 120kg PRODUCT NUMBER: 194826
cattle crush RANGE
OR
71300 306 204
STOCKSAFE® Force Range
CATTLE KING® Rotary Force
CATTLEMASTER® safety force
Features:• 360o dual sheeted gates• Fully enclosed• Safety lock forcing gates• Quiet operation• Nylon sleeved hinged system• Greased nipples• Manufactured from Australian made galvanised steel • Easy to erect• Can be added to any existing yard system
Features:• 3m radius• Sheeted for safety• Easy to erect• Anti-backing locking mechanism on gate
for operator safety
The Metalcorp CATTLE KING® rotary force is designed for the safe and effective flow of cattle in the lead up to the race, reducing stress on livestock by separating operator and beast. The 360 degree dual gates offer continuous flow.
The CATTLEMASTER® Safety Force is suitable for any sized cattle operation, designed with operator and animal safety in mind. It assists with the easy flow of cattle into your race or loading facility, making a stress free working area while reducing bruising with fully sheeted sides.
PRODUCT NUMBER: 212193
PRODUCT NUMBER: 215711
8 www.metalcorp.com.au
CATTLE KING® LOADING RAMPS
Features:• Heavy duty construction, manufactured
from 115mm x 42mm non-bruise oval rail • Non slip walkway with safety rail and
access ladder standard• Hardwood timber floor• Manway Gate at top of ramp for easy
access to race and truck access• Overhead bracing for additional strength• Levelled loading platform at top of ramp
CATTLE KING® 5.2 metre Deluxe Cattle RampOur top of the line heavy duty ramp, designed with continuous flow and high volume loading and unloading of cattle in mind.
DIMENSIONS: 5200mm (L) x 1705mm (W) x 3135mm (H) WEIGHT: 1264kg PRODUCT NUMBER: 185820
CATTLE KING® 3.6 metre Load Ramp with walkway
Features:• Heavy duty construction, manufactured from 115mm x 42mm non-bruise oval rail • Non slip walkway with safety rail • High tensile pressed metal galvanised sides, adding strength and reducing noise• Hardwood timber floor• Overhead bracing for additional strength
Optional Features:• Walkway can be provided on either side OR both sides upon request
Heavy duty 3.6metre ramp, designed with safety in mind for both operator and beast. Our most popular model, suited for all applications.
PRODUCT NUMBER: 202373DIMENSIONS: 3600mm (L) x 1705mm (W) x 3135mm (H) WEIGHT: 495kg
CATTLE KING® 3.6 metre adjustable Ramp with walkway
Features:• Contains Metalcorp’s unique spring assisted adjustment system • One hand adjustment operation, with dual pin locking system• Heavy duty construction, manufactured from 115mm x 42mm non-bruise oval rail• Hardwood timber floor• Overhead bracing for additional strength
Optional Features:• Walkway can be provided on either side
Heavy duty adjustable 3.6metre ramp with walkway, designed with safety in mind for both operator and beast, featuring Metalcorp’s unique spring assisted adjustment system.
PRODUCT NUMBER: 212421DIMENSIONS: 3600mm (L) x 1800mm (W) x 3300mm (H) WEIGHT: 652kg
Optional Features• Walkway can be
provided on either side OR both upon request
• Can have fully sheeted sides
91300 306 204
CATTLE KING® LOADING RAMPS
Features:• Fully portable loading solution • Simple to erect in minutes• 5 individual components make up this ramp• Easily constructed by two people in a matter of minutes• Sheeted galvanised sides for added strength, noise reduction and stock and operator safety• Hardwood timber floor
PREMIER® 3 metre Knock-down Load RampThe PREMIER® 3 metre knock-down load ramp offers heavy duty construction, while still offering a portable solution. DIMENSIONS: 3000mm (L) x 1800mm (W) x 3140mm (H) WEIGHT: 388kg PRODUCT NUMBER: 194830
Features:• Includes Metalcorp’s unique spring assisted adjustment system • One hand adjustment operation, with dual pin locking system• Heavy duty construction, manufactured from 115mm x 42mm non-
bruise oval rail • High tensile pressed metal galvanised sides, adding strength and
reducing noise• Hardwood timber floor• Overhead bracing for additional strength
CATTLE KING® 3.6 metre Adjustable Load Ramp Heavy duty adjustable 3.6m ramp, designed with safety in mind for both operator and beast, featuring Metalcorp’s unique spring assisted adjustment system.
DIMENSIONS: 3600mm (L) x 1800mm (W) x 3300 (H) WEIGHT: 425kg PRODUCT NUMBER: 202414
CATTLE KING® 3.6 metre Load Ramp
Features:• Heavy duty construction, manufactured from 115mm x 42mm non-bruise oval rail • High tensile pressed metal galvanised sides, adding strength and reducing noise• Hardwood timber floor• Overhead bracing for additional strength
Heavy duty 3.6m ramp, designed with safety in mind for both operator and beast. Our most popular fixed height model, suited for all applications.
DIMENSIONS: 3600mm (L) x 1800mm (W) x 3300mm (H) WEIGHT: 390kg PRODUCT NUMBER: 185807
10 www.metalcorp.com.au
CATTLE KING® Range
CATTLE KING® Yard Equipment
Features:• Rails: 115 x 42mm Cattle Rail | Legs: 50 x 50mm SHS• Steel cap top and bottom• 5 rail system, great visual deterrent - 575mm • Reduced bruising factor while handling cattle• Panels available in 3.1m, 2.5m, 2.25m• Height of top rail is 1.8m
The CATTLE KING® yard equipment range is Metalcorp’s top of the line, heavy duty stock handling solution, suitable for all heavy and intense cattle handling requirements. When only the best will do, CATTLE KING® delivers safe and secure systems.
PRODUCT NUMBER: 192315 PRODUCT NUMBER: 202815
CATTLE KING® Panels available in 3.1m, 2.5m, 2.25m lengths
CATTLE KING® Slide Gate
CATTLE KING® Manway Gate
CATTLE KING® Race Bow
CATTLE KING® 2.5m Gate-In-Frame
CATTLE KING® 5m Double Gate-In-Frame
PRODUCT NUMBER: 188546 PRODUCT NUMBER: 203570 PRODUCT NUMBER: 200903
111300 306 204
CATTLE KING® Range
PRODUCT NUMBER: 211887
CATTLE KING® Manway Panel available in 2.5m & 3.1m lengths
CATTLE KING® 7 Bar Panels Available in 2.5m & 3.1m
All products are available in hot dipped galvanised on request
CATTLE KING® Blind Panel available in 2.25m & 2.5m lengths
CATTLE KING® Force Bow Available in 2.5m
CATTLE KING® 6 Bar Panels Available in 2.25m & 2.5m
12 www.metalcorp.com.au
CattleMASTER® LOADING RaMPS
Features:• Galvanised 75x40mm rail construction• Hardwood timber floor • Overhead bracing for strength
CATTLEMASTER® 3 METRE CATTLE RAMPThis 3m loading ramp is our entry level to the CATTLEMASTER® loading ramp range.
Features:• Non slip walkway with safety handrail• Chain adjustment to suit various loading and unloading heights• Galvanised 75x40mm rail construction• Hardwood timber floor • Overhead bracing for strength
CATTLEmaster® 3 metre adjustable cattle ramp with walkwayThe CATTLEMASTER® adjustable loading ramp with walkway has all the key features you need in a load ramp.This quality Australian made loading ramp is made with safety of both user and stock in mind.
DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140 (H) WEIGHT: 600kg PRODUCT NUMBER: 230243
CATTLEmaster® 3 metre adjustable cattle ramp
Features:• Chain adjustment to suit various loading and unloading heights• Galvanised 75x40mm rail construction• Hardwood timber floor• Easy to relocate• Overhead bracing for strength
The CATTLEMASTER® 3 meter adjustable cattle ramp is a great ramp for loading and unloading various height vehicles.
Features:• Non slip Walkway with safety handrail• Chain adjustment to suit various loading and unloading heights• Galvanised 75x40mm rail construction• Hardwood timber floor• Overhead bracing for strength
CATTLEmaster® 3 metre Cattle Ramp with WalkwayThis is one of our most common load ramps, it comes with a non slip walkway and hand rail, this great all-rounder is just what your farm needs.
DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140 (H) WEIGHT: 350kg PRODUCT NUMBER: 230242
DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140 (H) WEIGHT: 550kg PRODUCT NUMBER: 230241
DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140 (H) WEIGHT: 300kg PRODUCT NUMBER: 230240
131300 306 204
CattleMASTER® RANGE
PRODUCT NUMBER: 186868
CATTLEMASTER® Panels vailable in 2.25m & 2.5m lengths
CATTLEMASTER® Slide Gate
CATTLEMASTER® Manway Panel
CATTLEMASTER® Race Bow
CATTLEMASTER® 2.5m Gate-In-Frame
CATTLEMASTER® 5m Double Gate-In-Frame
CATTLEMASTER® Yard Equipment
Features:• Rails: 75x40mm oval rail Legs: 50x50mm SHS• Steel capped top and bottom• 6 rail system = 450mm of visual rail• Height of the top rail is 1.8m• Interchangeable with the other Metalcorp ranges
CATTLEMASTER® yard equipment is the newest line to the Metalcorp range. This quality Australian made product is designed to be an all-round system that meets all your farm stock handling needs. Great value without compromising quality or strength.
PRODUCT NUMBER: 230448 PRODUCT NUMBER: 193282 PRODUCT NUMBER: 230237
14 www.metalcorp.com.au
Stockmaster® loading ramps
Features:• Galvanised pipe construction• Hardwood timber floor• Lightweight for easy relocating
STOCKMASTER® 3 METRE CATTLE RAMPThe STOCKMASTER® Loading Ramp is a practical, light weight loading ramp, suitable for the hobby farmer or as a transportable option to load & unload at your adjustment height.DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140mm (H) WEIGHT: 290kg PRODUCT NUMBER: 183868
Features:• Walkway with safety handrail• Chain adjustment to suit various loading & unloading heights• Galvanised pipe construction• Hardwood timber floor
Stockmaster® 3 metre adjustablecattle ramp with walkwayThe STOCKMASTER® Adjustable Loading Ramp provides a cheaper alternative to the end user without compromising quality. Excellent entry level ramp with a wide range of features.
DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140 (H) WEIGHT: 550kg PRODUCT NUMBER: 212635
stockmaster® 3 metre adjustable cattle ramp
Features:• Chain adjustment for various loading & unloading heights• Galvanised pipe construction• Hardwood timber floor• Lightweight for easy relocating
The STOCKMASTER® Adjustable Cattle Loading Ramp is great for loading various height vehicles.
DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140mm (H) WEIGHT: 300kg PRODUCT NUMBER: 178899
Features:• Walkway with safety handrail• Galvanised pipe construction• Hardwood timber floor
STOCKMASTER® 3 metre Cattle Ramp with WalkwayThe STOCKMASTER® Loading Ramp is a practical, lightweight loading ramp, suitable for the hobby farmer or as a transportable option to load & unload at your adjustment height.DIMENSIONS: 3000mm (L) x 1705mm (W) x 3140mm (H) WEIGHT: 550kg PRODUCT NUMBER: 215252
151300 306 204
PRODUCT NUMBER: 183583
STOCKMASTER®Race Bow
PRODUCT NUMBER: 198182 PRODUCT NUMBER: 173043 PRODUCT NUMBER: 143340
STOCKMASTER®Manway Panel 2.5m
STOCKMASTER®Manway Gate
STOCKMASTER® Slide Gate
STOCKMASTER® Yard EquipmentThe Metalcorp STOCKMASTER® yard range is made to suit entry level cattle handling. Manufactured form 32nb galvanised pipe.
PRODUCT NUMBER: 173048 PRODUCT NUMBER: 216197
STOCKMASTER® Panels 2.25m & 2.5m
STOCKMASTER® Gate-in-Frame 2.5m
STOCKMASTER® 5m Double Gate in Frame
Stockmaster® RANGE
16 www.metalcorp.com.au
TRANSPORTABLE STOCK HANDLING EQUIPMENT
Transportable Loading Ramp 3.7m Long
Heavy Duty Transportable Sheep Race With 3 Way Draft
PRODUCT NUMBER: 188551
PRODUCT NUMBER: 216747
METALCORP RANGE
Features:• 4.7m diameter• 7 Way Draft Facility• Overhead controls with platform• Heavy duty construction• Portable or fixed options available• Drafting way options variable
CATTLE KING® Drafting Pound
CATTLE KING® 3 Way Race Draft
PRODUCT NUMBER: 216835
PRODUCT NUMBER: 216753
Features:• 3 Way Drafting Module• Suitable for either in front of crush
or in race• Fixed unit• Gates only move one direction
(inwards) for ease of drafting• Controlled on operating side using
Stainless Steel manual cable system• Manufactured from Australian made
galvanised steel
Features:• Can transport a whole yard
– panels stack on the side • Removable draw bar• H/D solid axle
Features:• Can transport a whole yard
– panels stack on the side • No Wheels to remove• Draw Bar just folds up out
of the way
3 Way Draft With Working Gates
171300 306 204
CATTLE YARD DESIGNS
Suitable for the CATTLE KING® and CATTLEMASTER® ranges
20 HEAD WORKING (40 HEAD HOLDING)
Optional Cattle Crush
Optional Load Ramp
7.2m Ra
dius
12.5m
8.6m
2.252.25
2.25
2.25
20 C 55 HEAD WORKING (70 HEAD HOLDING)55 S
15m
10m Optional Cattle CrushOptional Cattle Crush Optional Cattle CrushOptional Load Ramp
85 HEAD WORKING (125 HEAD HOLDING)85 C
17.5m
15.4
m
10.9m Radius
2.5m Radius
10.2m Radius
7.2m Ra
dius
2.25
2.25 2.252.25
2.25Optional Cattle Crush
Optional Cattle Crush
Optional Load Ramp
Optional Calf Race
125 HEAD WORKING (210 HEAD HOLDING)125 S
24m
14.6
m
Optional Cattle Crush Optional Load Ramp
165 HEAD WORKING (280 HEAD HOLDING)
26.5m
9.8m Radius
7.2m Radius
2.252.25
2.25
17.3
m
165 C
Optional Cattle CrushOptional Cattle Crush
Optional Load Ramp
Optional Cattle Race
18 www.metalcorp.com.au
SHEEPKING® 3m Adjustable Loading Ramp wITH WalkwaySHEEPKING® 3 metre adjustable load ramp, solid construction with walkway. Suitable for all on-farm stock loading.
Features:• Adjustment feature allows loading from semi-trailer down to box trailer• Metalcorp’s lockable chain adjustment system • Solid construction, manufactured from galvanised oval rail• Non-slip walkway with safety rail • Sheeted galvanised W-strap sides, for added strength, noise reduction and stock and operator safety• Hardwood timber floor• Overhead bracing for additional strength
PRODUCT NUMBER: 212522
SHEEPKING® 3m Adjustable Loading Ramp3 metre adjustable load ramp, solid construction. Suitable for all on-farm stock loading.
Features:• Solid construction, manufactured from galvanised oval rail• Metalcorp’s lockable chain adjustment system • Sheeted galvanised W-strap sides, for added strength, noise reduction
and stock and operator safety• Hardwood timber floor• Overhead bracing for additional strength
PRODUCT NUMBER: 206435
SHEEPKING® 3 PART LOADING RAMPPRODUCT NUMBER: 207780
Features:• 2.4 m long• V shaped in construction• Light weight and transportable• Fully galvanised oval rail construction
SHEEPKING® V-Race
Features:• 3.2m long • V shaped sheeted sides• 3-Way draft • Gate stops to allow quick drafting• Latches on gates• Solid construction
PRODUCT NUMBER: 208844
SheepKING® HANDLING EQUIPMENT
191300 306 204
SHEEPKING® Panels Available in 2.75m
SHEEPKING® Race Bow
SHEEPKING® Manway Panel 2.75m Concrete Posts
SHEEPKING® Drench Panel
SHEEPKING® Slide Gate
SHEEPKING® 2.75m Gate-In-Frame
SHEEPKING® 2.4m Blind Panel
PRODUCT NUMBER: 206430
PRODUCT NUMBER: 206433
PRODUCT NUMBER: 215042
PRODUCT NUMBER: 206587
PRODUCT NUMBER: 206431 PRODUCT NUMBER: 206432
SheepKING® RANGE
PRODUCT NUMBER: 219779
SHEEPKING® RANGE
Features:• All products are 1.2m High• 115mm x 42mm visible top rail• 53mm x 35mm anti-bruise panel rails• Dog friendly • Extra high to discourage jumpers • Manufactured from Australian Made
galvanised steel tube• Fully sheeted, galvanised blind panel
option for forcing area
SHEEPKING® 5.5m Double-Gate-In-Frame
PRODUCT NUMBER: 216824
20 www.metalcorp.com.au
SHEEP & goat HANDLING EQUIPMENT
Sheep & Goat Handling Equipment
• 3 unit rotary with stand• Robust construction, suitable for different sized lambs• Legs clamped individually• Automatic releasing• Cradle available in single buy
• Simple manual operation, securely holding sheep around the middle, immobilising them at a safe working height
• 1m high• Available in 2.5m• Manufactured from high strength galvanised steel• Steel caps top and bottom• Compatible with any Metalcorp sheep system
• 2.8 x 1.3m• 7 rail configuration 53mm x 35mm oval • Steel caps top and bottom
LAMB MARKING CRADLE
SHEEP AND GOAT CATCHER
SHEEPMASTER® ECONOMY SHEEP PANEL
ECONOMY GOAT PANEL
PRODUCT NUMBER: 196299
PRODUCT NUMBER: 204445
PRODUCT NUMBER: 186043
PRODUCT NUMBER: 184578
211300 306 204
SHEEP YARD DESIGNS
320 HEAD YARD 485 HEAD YARD
740 HEAD YARD655 HEAD YARD
1155 HEAD YARD 1370 HEAD YARD
22 www.metalcorp.com.au
HORSE YARDS
HORSE KING® management systems
HORSE KING® Round Yards
PREMIER®
The HORSE KING® yard range is manufactured from quality lightweight Australian made steel for easy interchanging of yard components. Its high tensile properties provide great flexibility in the yards to handle any accident to the components that can incur when working.
HORSE KING® round yards are a more flexible option than a permanent round yard. Not only can the size be reduced or increased as needed, the HORSE KING® round yard allows for an effective working environment for both animal and trainer.
PREMIER® is your 6 rail system for all your on farm needs. It is very popular for the horse market.
Features:• Strong 1.6mm Australian made tube• Manufactured from 53x35mm oval rail• Ideal for horse round yards• Fully galvanised• Interchangeable with all of Metalcorp’s other ranges• Rubber matting available for walls around the yard
HORSE KING® 5 Bar 3.1m Panel
PREMIER® 6 Bar 2.1m Panel
PREMIER® High Gate in Frame 6 Bar
2.1m (L) x 3.1m (H)
HORSE KING® High Gate in Frame 5 Bar
2.1m (L) x 3.1m (H)
1 X High Gate in frame & 15 x 3.1m panels
32 pins
15 METER
15M
20 METER1 x High Gate in frame
& 20 x 3.1m panels42 pins
20M
28 METER1 x High Gate in frame
& 28 x 3.1m panels58 pins
28M
PRODUCT NUMBER: 215283
PRODUCT NUMBER: 169887 PRODUCT NUMBER: 201760
PRODUCT NUMBER: 215284
Features:• Strong 1.6mm Australian made tube• Manufactured from 53x35mm oval rail• Ideal for horse round yards• Fully galvanised• Interchangeable with all of Metalcorp’s other ranges• Rubber matting available for walls around the yard
231300 306 204
STABLEHAND® MANAGEMENT SYSTEMS
STABLEHAND® Horse Crush
STABLEHAND® Stable Partitions
STABLEHAND® Horse Shelter
Features:• Lightweight• Portable • Easy to transport• Suitable for gymkhanas and
horse shows • Horse float brackets also
available
Features:• Non-slip rubber• Comes with tie down straps• Holds 6 panels• Removable arm
Features:• Inside door which can be opened for quick release• Dual back gates, the top one is removable enabling access for veterinary
procedures while protecting the handler• Removable head restraint allows mouth access while in place• Rotating vet tray that is interchangeable from front to rear• Non-bruising oval rail sides. Equipped with holes for bar restraints which can hold
the animal to the front or rear of the crush• Adjustable bridle holder to handle all sized horses• Front gate, top rail cut out to assist the veterinarian with all procedures
STABLEHAND® Float Panels STABLEHAND® FLOAT BRACKET
The STABLEHAND® horse crush ensures the complete protection of the handler whilst the horse is in a stable.
The STABLEHAND® stable partitions are the perfect choice for both permanent and portable stable solutions. The permanent stable partitions have been designed to fit into any structure and transform it into a strong and durable stable system. The STABLEHAND® stable partitions make taking care of your horses easy while providing you with peace of mind knowing that they are safe and secure.
The STABLEHAND® horse shelter is designed to protect your horses from rain and sun, all year round.
DIMENSIONS: 2130mm (L) x 1070mm (W) x 2500mm (H) WEIGHT: 237kg PRODUCT NUMBER: 212086
DIMENSIONS: 2000mm (L) x 1330mm (H) PRODUCT NUMBER: 216426 PRODUCT NUMBER: 216427
ROOF AREA: 4.0m x 4.0m INTERNAL AREA: 2.1m (W) x 4.0m (L) x 2.6m (H)
24 www.metalcorp.com.au
STOCKSAFE® Farm Access Grids
STANDARD SIZE: 4.0m x 2.0m STANDARD MATERIAL: Galvanised RHSSTANDARD FINISH: All welds are painted
All STOCKSAFE® grids are manufactured with mounting brackets for side wings. Wing sets are available to suit as an optional extra. CATTLE KING® Wings constructed with three rails of Cattle Rail.
STOCKSAFE® UNRATED Farm Access Grid
GRID WINGS
NB: Metalcorp reserves the right to produce grid sub-frames from RHS, U-Beams, U-Columns or similar products, the overall height may vary.
Light duty aprilla GRID
Medium duty aprilla GRID
• 2.1m x 3.5m• 500mm High• Single modular units• 40mpa concrete base• 5 year warranty• Grid wings included
• 2.1m x 4.0m• 500mm High• Single modular units• 40mpa concrete base• 5 year warranty• Grid wings included
PRODUCT NUMBER: 198323
PRODUCT NUMBER: 210471
PRODUCT NUMBER: 210472
PRODUCT NUMBER: 202249
251300 306 204
Range of Livestock Feeders
jumbo grain feeder
Round bale feeder Multi Feeder
PRODUCT NUMBER: 209778
Features:• 2400mm long• Extremely well made. Solid construction• 3000kg grain holding capacity• Ladder and walkway so you can safely inspect from the top• The shutter doors are adjustable to adjust grain flow
Features:• One piece solid construction• 2100mm in diameter• 1550mm high• Made from Australian made
galvanised oval rail
Features:• 2400mm long• Holds up to 4 bales of hay in the
hot dipped galvanised section• Holds up to 4 bags of feed in the
grain section• Adjustable feeding flow
Sheep Lick feeder Cattle lick feeder
Features:• Australian made galvanised
steel• Easy fill design• Heavy duty skids• Adjustable feed control
Features:• Australian made galvanised
steel• Easy fill design• Heavy duty skids• Adjustable feed control
PRODUCT NUMBER: 210667 PRODUCT NUMBER: 190991
PRODUCT NUMBER: 173723tombstone extensions
Features:• Extend your 2 piece to a 4 piece
to fit square bales• Pins together• Galvanised for paddock conditions
PRODUCT NUMBER: 143332tombstone Feeders
Features:• 2 piece construction• Pins together• Pins are attached with chains
so you wont lose them• Galvanised for paddock conditions
PRODUCT NUMBER: 214718 PRODUCT NUMBER: 214719
26 www.metalcorp.com.au
CALF HANDLING EQUIPMENT
Spin Roll Calf Cradle
Calf Crush
CALF RACE CALF YARD COMPONENTS
Features:• 650mm off ground working height• Scissor action, ratchet locking design • Automatic releasing gate • Contoured table for easy access• Adjustable height • Triple protection, enamel coating, super etch undercoat,
galvanised construction
Features:• 1730mm x 500mm• The innovative immobilising swing bar ensures the calf remains
completely still whilst the operator performs their tasks• The upright position relaxes the animal and reduces strain on the
operator• Minimises the chance of infection and provides safer work practices for
calf management including castration and branding;• It is recommended that the cradle be bolted to a concrete slab
Metalcorp’s spin roll table calf cradle is designed for fast processing of calves and energy efficient to the user.
The invention of the Calf Crush is based on the cutting edge vertical design. This type of cradle is designed to hold the calf vertically, in its normal stance, for better restraint.
PRODUCT NUMBER: 185771
PRODUCT NUMBER: 212634
PRODUCT NUMBER: 203332
Features:• 24320mm x 430mm• 2 section Race for cost effective transport• Sheeted Race Gate at front of Race (excellent blocking)• 2 x adjustable Race gates (lockable)• Suits all types of calf cradles
271300 306 204
TRAPS / WIRE WINDERS /WEIGH PRODUCTS
Spear Traps
TRU-TEST weigh equipment
Wire Winders
SPEAR TRAPS WITH GATESSuperior strength medium
and heavy grade steel used in construction of this product ensures longevity of the product. Designed to be attached to any portable yard system.
Weighing replaces guess-work with facts, making it a powerful performance measurement tool for farmers. The information provided by Tru-Test weigh scales assists critical decision making about feed, health treatments and herd size management. Speak to Metalcorp today.
Superior strength medium and heavy grade steel used in construction of this product ensures longevity of the product. Swinging gate attached with robust chain latch to lock any beast within yards.
DIMENSIONS: 2100mm (HIGH), 720mm (OPENING)
DIMENSIONS: 2100mm (HIGH), 720mm (OPENING)
THE HYDRAULIC WINDER MOTORISED WIRE WINDER
• The ultimate tool for wire recovery• Can adjust recoil speed as needed, which
reduces the chance of wire breakage• Can be used for both plain and barbed wire• Category 2, three point mount• Removable wheel for easy unloading of wire• Replaceable moly impregnated polyethylene
bushing on shaft to prevent wear
4 ARM CONFIGURATION 5 ARM CONFIGURATIONPRODUCT NUMBER: 188561
PRODUCT NUMBER: 198775PRODUCT NUMBER: 216277
PRODUCT NUMBER: 203137
• 5.5 hp Honda petrol engine• Belt driven on clutch side for easy servicing• Chain driven on reel side• Shaft between clutch and reel drive rides on mounted
bearings for years of use• Clutch can be operated from either side of unit• Standard split reel holds 500m of 1.8HT or 400m of 2.5mm
Barbed wire or 1500m of plain wire.• Reel shaft rides on two moly impregnated poly brushes• Unit is designed with tie off loops on the frame to hold it in
place during operation• A lifting hook in the centre of the machine makes it a one
man operation to load and unload the machine
28 www.metalcorp.com.au
FENCING
PLAIN WIRE
HINGED JOINT BARBED WIRE
NETTING
GALVANISED POSTS
MAX-LOC HORSE FENCING
BLACK POSTS
STRAINERS & stays
STRAINERS100NB 2100mm100NB 2400mm
STAYS40NB 3250mm50NB 3250mm
HINGED JOINT6x70x30x2.5mm galvanised x 200m8x80x15x2.5m galvanised x 100m6x90x30x2.5m galvanised x 200m7x90x30x2.5m galvanised x 200m8x90x30x2.5m galvanised x 200m
PLAIN WIRE2.5mm galvanised MT-1500mm2.5mm galvanised HT-1500mm2.8mm galvanised HT-1000mm3.15mm galvanised ST-750mm4.0mm galvanised ST-500mm
BARBED WIRE1.57mm high tensile galvanised 500m1.8mm high tensile galvanised 500m2.5mm IOWA galvanised 400m
NETTINGNET-HX-40-40-1.4-300-100mNET-HX-40-40-1.4-900-100mNET-HX-40-40-1.4-1050-100m
Post driver
Posts available in:• 165cm• 180cm
Posts available in:• 45cm • 135mm • 210mm• 60cm • 165mm • 240mm• 90cm • 180mm
METALCORP POST DRIVER • 800mm long• Solid construction
291300 306 204
YARD BUILDING PRODUCTS
VERTICAL BRACE (MESH) GATES (1170mm High)
WOPS & WOS FITTINGS
WELDING HEMLET
CATTLE CABLE
CAPS AVAILABLE TO SUIT SLAM LATCHES GATE HINGE PACKS
6 BAR GATES (1490mm High)
N-STAY GATES (1170mm high)
5 BAR GATES (1170mm High)
DIY CATTLE YARD FENCING OPTIONS
Features:• 7 strand• Galvanised• 400m roll
We stock a wide range of material and fittings for your permanent yard systems.
VERTICAL BRACE (MESH) GATES (1170mm High)850mm [3’] No Brace 8kg1160mm [4’] No Brace 10kg1460mm [5’] No Brace 13kg1770mm [6’] No Brace 14kg2070mm [7’] No Brace 16kg2380mm [8’] 1 Brace 20kg2980mm [10’] 1 Brace 22kg3580mm [12’] 1 Brace 26kg4180mm [14’] 2 Braces 31kg4780mm [16’] 2 Braces 36kg
2980mm [10’] N Brace 26kg3580mm [12’] N Brace 29kg4180mm [14’] N Brace 33kg4780mm [16’] N Brace 37kg
6 Bar gates come in limited sizes and can be made to order
2370mm [8’] 1 Brace 25kg2970mm [10’] 1 Brace 29kg3570mm [12’] 1 Brace 34kg4170mm [14’] 2 Braces 41kg4780mm [16’] 2 Braces 44kg
Cattle RailCATTLE RAIL
Features:• Available in galvanised or painted• Other rail sizes available
115 x 42 x 2mm x 6100mm
Features:• Available in 12, 16, 20 & 27mm
Features:• Auto Darkening with grind mode• Helmets are solar powered
Features:• Available in 10,14, 20 & 25mm
PRODUCT NUMBER: 184119
Features:• Round caps available from
20nb – 150nb • Square caps available from
25sq – 125sq
30 www.metalcorp.com.au
ELECTRIC FENCING
2.5km SOLAR energiser
GATE HANDLE
FAULT LOCATOR
Electric fence warning sign
200m 12mm TAPE
15km Main Energiser
GEARED REELS
7.5km battery energiser
Cattle prodder
10km Solar energiser
311300 306 204
ELECTRIC FENCING
CUT OUT SWITCHSTEEL POST CAP INSULATOR PORCELAIN RACKET STRAINER
UNDERGROUND CABLE 150mm plastic stand off
Steel post insulator
split bolt Wire Joint Clamp
Porcelain large REEL insulator
300mm Porcelain Reel Offset
Porcelain end strain insulator
Super end strain insulator
Steel post pinlock insulator
32 www.metalcorpsteel.com.aumetalcorp.com.au 1300 306 204
Your rural steel expert!
The information contained in this brochure is provided by way of general information only, and should not be relied upon by any person. You must seek specific advice as to the suitability of the products featured in this brochure for the purpose for which, and the manner in which, you propose to use them. This may involve further independent analysis and
testing. Metalcorp, and its related bodies corporate take no responsibility for any adverse consequences of any nature which arise as a result of reliance on this brochure © 2015. Metalcorp is a registered Trademark of BlueScope Steel Limited (ABN 88 096 380 068).