Post on 11-Mar-2019
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
1
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
List of NDT & Inspection
Approved Training Organisations
CONTENTS
Part 1 – Accredited Non-Destructive Testing (NDT) Courses Available Page 3
Part 2 – Courses outside the scope of PCN meeting specific criteria Page 14
Part 3 – Providers of individually designed level 3 training packages recognised by BINDT Page 18
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
2
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
Foreword
Approval of Level 3 Training.
The BINDT Approval Panel, which reports to MQ&E (Membership, Qualification and Education Committee) routinely accredits training courses at Level 1 and 2.
Courses are approved as meeting specific requirements, (generally defined in terms of an examination syllabus) and the object of the exercise is to ensure that all
aspects of the syllabus are addressed within the training course at a suitable level and depth.
Most courses that are accredited will be for training prior to PCN examinations but that need not always be the case. For instance if an ATO has a requirement to
train candidates to perform a range of well defined tasks, then a training course could be designed, and subsequently accredited by BINDT as meeting those
requirements and would be listed under part 2 of the approval list.
The syllabus is well defined, therefore a training course can be designed to cover those areas of learning. This works well for Level 1 and Level 2 training but it
does not work at Level 3.
Level 3 courses need to be well versed in a very broad range of knowledge and the candidate should be familiar with Product Technology, the other four main NDT
methods, Procedure Writing and so on.
The way that we address this dilemma is to define three main requirements that training centres must meet if they are to be recognised as providers of Level 3
training:
1. The tutors must be Level 3 Certificated. 2. The training school must have available the defined Essential Reading material. 3. There must be a system in place whereby candidates are assessed on arrival, (or beforehand), in order to identify the gaps in their knowledge. The
training course must then be specifically designed to address those areas of weakness.
The course content must be designed as a bespoke product, suited to a particular individual. Any training establishment that meets the three requirements set
out above may request that BINDT recognises that they are capable of offering Level 3 training courses and once proven at audit can be listed under part 3 of the
approval list but will not be included on their certificate of approval.
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
3
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
PART I Accredited Non-Destructive Testing (NDT) Courses Available
Note: Courses validated as suitable pre-approval training for PCN examinations also broadly satisfy the General Theory and Product Technology requirements of
employer-based schemes (e.g. NAS 410, EN 4179 and SNT TC 1A).
Any course offered under a company-based certification scheme must also satisfy the requirements of the employer’s written practice and training programme.
It is the employer’s responsibility that any necessary company specific training that would fall outside the validated course syllabus and content is adequately
addressed. Condition Monitoring courses are in accordance with ISO18436 and CMGEN.
All courses listed below are approved as suitable preparation for the corresponding PCN examinations.
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
4
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
KEY TO CODES TO DEFINE SCOPE OF APPROVAL
Numbers in bold type indicate the certification level at which the course(s) are aligned.
Letter(s) indicate the product sector to which each course is aligned.
CODE PRODUCT SECTOR
G GENERAL
W WELDS
C CASTINGS
F FORGINGS/WROUGHT PRODUCTS
A AEROSPACE
R RAIL
ISI IN-SERVICE INSPECTION
CODE NDT METHOD
RT Radiographic Testing
RI Radiographic Interpretation
CRT Computerised Radiographic Testing
UT Ultrasonic Testing
MT Magnetic Particle Testing
PT Penetrant Testing
ET Eddy Current Testing
VT Visual Testing
WI Weld Inspection
ACFM Alternating Current Field
Measurement ISI UT
UT thickness Measurement + Corrosion Monitoring of steel components at level 2 TOFD Time of Flight Diffraction
PA Phased Array
CODE SCOPE OF COMPETENCE
a X-Ray only
b Dense Metals Welds
c Ultrasonic testing of railway axles
d Ultrasonic testing of railway axles (solid or hollow)
e Single frequency Eddy Current Testing of Welds
g Tube testing
l Light Metal Welds
r Rail
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
5
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
APPROVED TRAINING ORGANISATIONS - UK
EAST ANGLIA – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM E-learning
International School of Aerospace NDT Unit 2, Beech Avenue Taverham Norwich NR8 6HW
Contact: Wayne Middleton T: +44 (0) 1603 260148. E: info@isandt.co.uk E: wayne.middleton@isandt.co.uk &
Jessica.flint@isandt.co.uk W: www.isandt.co.uk
1,2
A 1,2
A 1,2
A 1,2
A 1,2
A
TWI Ltd - Cambridge Granta Park Abington Cambridge CB21 6AL
Contact: Michael Skerik T: +44 (0) 1223 899 500 E: trainexam@twitraining.com W: www.twitraining.com
2 W,C
2 W,C
1,2 G
TOFD
PA
1,2 W,F,C
1,2 W,F,C
2 F,A
✓
Tri Service School of NDT 71 (IR) Squadron, Building 716 RAF Wittering Peterborough PE8 6HB
Contact: Guy Lawton T: +44 (0) 1780 417912 E: Guy.Lawton173@mod.gov.uk
2 A
2 A
2 A
2 A
2 A
EAST of ENGLAND – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM GUIDED WAVE
Aerospace Inspection Training Ltd Units 9 & 10 Takeley Business Centre Dunmow Road Takeley, Essex CM22 6SJ
Contact: Samantha Wright T: +44 (0) 1279 870276 E: Jayn.lone@aerospacendt.co.uk E: samantha.wright@aerospacendt.co.uk W: www.aerospacendt.co.uk
1,2a
A 1,2
1,2
A
PA
1,2
A
1,2
A 1,2
A
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
6
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
APPROVED TRAINING ORGANISATIONS - UK
EAST MIDLANDS – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
SERCO Limited Room 130 Stephenson House RTC Business Park London Road Derby DE24 8UP
Contact: Paul Seaton T: +44 (0)1332 264 782 E: paul.Seaton@serco.com
1,2, C,D
1R 1,2
W,F,C,R
NORTH EAST – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
NDT Centre (Oceaneering Inspection) 109 Bowesfield Lane Stockton-on-Tees TS18 3HF
Contact: Geoff Mason T: +44 (0) 1642 604 661 E: gmason@oceaneering.com
2 W
2 W
2 W
2 W
2 W
TWI Technology and Training Centre (North East) Ferrous Road Riverside Park Middlesbrough TS2 1DJ
Contact: Michal Skerik T: +44 (0) 1642 216320 E: michal.skerik@twi.co.uk W: www.twitraining.com
2 W,F,C
2
W,C
1,2 G
2 W
2 W,F,C
2 W,F,C
2 F,A
1,2 Wf
AIS Shoreland Training NDT Ltd 3 & 4 Jupiter Court Tyne Tunnel Trading Estate Newcastle Upon Tyne NE29 7SE
Contact: Eve Roberts T: +44 (0)844 800 1810 E: eve@shorelandndt.com W: www.shorelandndt.com
1,2
W,F
1,2 W,F,C
1,2 W,F,C
1,2 W
1,2
W,F,C
1,2
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
7
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
APPROVED TRAINING ORGANISATIONS - UK
SCOTLAND – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM ISI UT
Fife College Future Skills Centre, Stenton Road Glenrothes Fife KY6 2RA
Contact: Peter McPherson T: +44 (0) 1592 223 355/223 387 E: petermcpherson@fife.ac.uk E: tifferyjen@gmail.com W: www.fife.ac.uk/
2 W
2 W
1,2 W
1,2 W,F,C
1,2 W,F,C
1,2 W,F,C
2
Array Training Limited C/O Rigmar Group Hareness Circle Aberdeen AB12 3LY
Contact: Ray Wilson/Claire Fyvie T: +44 (0) 1224 243 000 E: Ray.Wilson@arraytraining.com E: info@arraytraining.com W: www.rigmartraining.com
1,2
W
Basic Rad
Safety
2
W
1,2
W,F
1,2
W,F
1,2
W,F
1,2
W
1,2 ISI UT
NORTH WEST – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
Talon NDT Blackpool Ltd 1 & 2 Keystone Court Hallam Way, Blackpool Lancashire FY4 5NZ
Contact: Lynn Brodie E: lynnbrodie@talonndtblackpool.com T: +44 (0) 1253 696400 W: www.talonblackpool.com
2 W
1,2 W,F
1,2 W,F,C
1,2 W,F,C
1,2 W
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
8
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
APPROVED TRAINING ORGANISATIONS - UK
SCOTLAND – cont’d… RT RI CRT UT MT PT ET VT WI ACFM
Talon NDT Ltd Unit 6, Murcar Commercial Park Denmore Road Bridge of Don Aberdeen AB23 8JW
Contact: Ian Judge T: +44 (0) 1224 822 251 E: info@talonndt.co.uk W: www.talonndt.co.uk
1,2 W
Basic
Rad
Safety
2
W
1,2 W,F
1,2 W,F,C
1,2 W,F,C
1,2 W
TWI Aberdeen Unit 20 Spires Business Centre, Mugiemoss Road, Bucksburn Aberdeen AB21 9BG
Contact: Andrew Jeffreys T: +44 (0) 1224 691 222 E: andrew.jeffreys@twi.co.uk W: www.twitraining.com
2 W,C
1,2 G
1,2 W
1,2 W,F,C
1,2 W,F,C
1,2 W
WALES – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
South West School of NDT Longwood Drive Forest Farm Cardiff CF14 7HY
Contact: Michelle Clapham T: +44 (0) 292 054 0000 E: training@minton.co.uk W: www.swsndt.co.uk
1,2 W,A
2 W
1,2 A,W
1,2 W,F,C,
A
1,2 W,F,C,
A
1,2 A,F
1,2
W,F,C 2
Testia Ltd Airbus Main Gate Golf Course Lane Building 07A, Filton, Bristol BS34 7QQ
Contact: Charlotte Smith T: +44 (0) 1633 715811 E: charlotte.smith@airbus.com W: www.testia.com
1,2 A
1,2
A 1,2 A
1,2 A
1,2 A
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
9
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
APPROVED TRAINING ORGANISATIONS - UK
WEST MIDLANDS – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
NDT Consultants Ltd Middlemarch House Siskin Drive Coventry CV3 4FJ
Contact: Linda Dulay T: +44 (0) 24 7651 1151 E: sales@ndt-consultants.co.uk W: www.ndt-consultants.co.uk
1,2 A
1,2
F,C,A 1,2
F,C,A 1,2
F,C,A 1,2
F,C,A
YORKSHIRE & HUMBER – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM ISI UT
IMechE Engineering Training Solutions 4 Europa View Sheffield Business Park Sheffield S9 1XH
Contact: Howard Garlick T: T: +44 (0)114 399 5751 E: h_garlick@imeche.org W: http://trainingsolutions.imeche.org
1,2 W,F,
C
2 W,C
1,2 W,F,
C
1,2 W,F,C TOFD
PA
1,2 W,F,C,
R
1,2 W,F,C,
R
1,2 W
1,2 W,F,C
1,2
ISI UT
Lavender International NDT Consultancy Services Limited Unit 7, Penistone Station Sheffield S36 6HP
Contact: Beverley Scott T: +44 (0) 1226 765 769 E: enquiries@lavender-ndt.com W: www.lavender-ndt.com
1,2 W,F,
C
2 W,C
1,2 W,F,
C
1,2 W,F,C
TOFD-W
PA -W,F,C
1,2 W,F,C
1,2 W,F,C
1,2 F g
1,2 W e
1,2 W,F,C
2 1,2 W
ISI UT
Element Materials Technology Sheffield – Maltravers Maltravers Road Sheffield South Yorkshire S2 5AD
Contact: Mr S Sennett P +44 (0)1142 808 064 O +44 (0)1142 727 317 ext. 76664 F +44 (0)1142 727 319 Steve.Sennett@element.com www.element.com
2 W,F,C,A
1,2
W,F
2 W,F,C,
A
2 W,F,C,
A
LIBERTY STEEL Stocksbridge Sheffield S36 2JA
Contact: Mr John Barker T: +44 (0) 1142 832 071 E: john.barker@specialityuk.com W: www.libertyspecialitysteels.com
1,2
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
10
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
APPROVED TRAINING ORGANISATIONS – EUROPE AND WORLDWIDE
AUSTRALIA – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM ISI UT
ATTAR Unit 1, 64 Bridge Road Keysborough, Victoria 3173 Australia
Contact: Paul Grosser T: +61 3 9574 6144 E: paulgrosser@attar.com.au W: www.attar.com.au
2 W
2 W
2 W,F,C
2 W,F,C
TCS NDT Tafe, Perth Campus, Building 2,
Room, 1-35, 30 Aberdeen Street,
Perth, Western Australia 6000
Contact: Elise Cronin T: +61 (0) 426 684 822 E: elise@tcsndt.com.au W: www.tcsndt.com.au
1,2 W1,2 Basic Rad
Safety
1,2
TOFD PA (W)
1,2 W,F,C
1,2 W,F,C
1,2
W
ISI UT
CHINA (PEOPLE’S REPUBLIC) – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
SGS (Shanghai) NDT Training & Examination Centre SGS-CSTC Standards Technical Services Co Ltd, 2F, Building 8, No 69, 1159 East Kangqiao Road, Pudong District, Shanghai 201319, P.R. China
Contact: Sophia Bian M: +44 7825 099176 E: Sophia.bian@sgs.com W: www.sgs.com
1,2 W,C 1,2 C
2 W,Cb
1,2 W,F,C
TOFD
PA (W)
1,2 W,F,C
1,2 W,F,C
1,2 W,F,C
Taikoo (Xiamen) Aircraft Engineering Co.Ltd Guandian Second Road, Huli District, Xiamen 361006
Contact: Lei Yue E: leiyue@haeco.com T: (86) 592 5737 290
1,2 A
1,2 A
1,2
1,2 A
1,2
A
Xiamen United Technology Center Ltd Wu Han Building, 261 Jai He Lu, Building 1, Room 9C, Xiamen P.R.C
Contact: Raymond Ho E: raymond@yahoo.com.hk T: (86) 592-5083118
1,2 A
1,2 A
PA (W)
1,2 A
1,2 A
1,2
A
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
11
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
CARIBBEAN –
Name of Approved Training Organisation & Contact Details RT RI CRT UT MT PT ET VT WI ACFM
NDE Institute of Trinidad Ltd 15 Robertson Street, Les Efforts East, San Fernando, Trinidad W.I.
Contact: Sonny James T: (868) 653 9343 T: (868)-657-6572 E: sjames@learnndt.com E: loriann.keane@gmail.com E: info@learnndt.com W: www.learnndt.com
1,2 W
1,2 W,F,C
1,2 W,F,C
GREECE – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
KΕΚ Ι.V.EP.E-SEV
143 Liossion & 6 Theirsiou Str. Attikis Square 10445 Athens Greece
Contact: Mr Thanos Totsikas T: +30 210 8257 817 E: thtotsikas@ivepe.gr W: www.ivepe.gr
Basic Rad
Safety course ONLY
1,2 W,P
1,2 W,F,C
1,2 W,F,C
1,2 W,F,C
2
TQCC/Lavender Greece Z Pigis 51 382 22 Volos Magnesia Greece
Contact: Athena Xirofotou T: +30 24210 59881 E: info@tqcc.gr W: www.tqcc.gr
1,2 W,C
2 W,C
1,2 W
‘PLATE’ F,C
PA 1,2 W,F,C
TOFD
1,2 W,F,C
1,2 W,F,C
1,2 W,F,C
1,2 W,F,C
1,2 W,F,C
2
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
12
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
GREECE – Cont’d….. Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
TQCC/Lavender Greece G. Papandreou 150, 14452 Metamorfosi,
Athens, Greece
Contact: Dimitrios Pitteris & Apostolos Kotouas E: info@tqcc.gr T: +3024210 59881
1,2 W
2
W
1,2 W
‘PLATE’ F,C
PA 1,2
1,2 W,F,C
1,2 W,F,C
1,2 F
1,2 W,F,C
2
INDIA – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
Noble Quality Evaluation Private Ltd Plot no. 20 & 21, Anjaneya Nagar (Near Miet), Gundur (Post), Tiruchirapalli, 620007, Tamil Nadu, India
Contact: Mr Ramesh Narayanasamy T: +91 822 095 4947 E: nobleqe@gmail.com W: www.nobleqe.com
2
W b
1,2
W 1,2 W
1,2 W
BIT inspection Technology
No. 11, 6th Pillaiyar Koil Street, Ambal
Nagar, Ekkatthuthangal, Chennai
India 600032
Contact: Rajamanickam Baskar T: +91 98408 00863 E: rbaskar@bitndtindia.com
1,2 W
2 W b
1,2 W
1,2 W
1,2 W
Smart Technocrats and Consultancy Services (I) Pvt. Ltd Plot No. 5ector 18A, Nerul, Navi, Mumbai, India 400706
Contact: Sunil Mukul T: +91 22 2770 6055 E: smartndt@vsnl.com / sunilmukul@redifmail.com
1,2 W
2 W b
1,2 W
TOFD
PA (W)
1,2 W
1,2 W
A-Star Training and Consultancy Pvt Ltd “Shree” Building, 47/11-1 Devadi Street, Off Kutchery Road Near More Supermarket, Mylapore, Chennai 600004 Tamil Nadu, India
Contact: Anup Nair T: +91 44 2495 0082 E: anup@astar-training.com
2 W
1,2 W
TOFD
PA (W)
1,2 W
1,2 W
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
13
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
INDIA Cont’d - Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
ROYAL TECH TRAINING & CONSULTANCY Plot no A75, Opp Petrol Pump, VUDA colony, gopalapatnam, Visakapatnam- 530027 Andrapradesh, India
Contact: Raja Suhas T: +91 8916524882 E: royaltechpcn@gmail.com
2
Wb
1,2 W
TOFD PA (W)
1,2 W
1,2 W
Trichy Institute for Welding M.S.A Complex, 1st Floor, Rail Nagar. Ariyamangalam, Trichy, 620010 Tamil Nadu India
PCN Coordinator: M Riyaz T: +914312442118 E: tiwpcnaudit@gmail.com
1,2 W
2 W
1,2 W
UTPA 1,2
1,2 W
1,2 W
INDONESIA –
Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
Indonesia Institute of NDT (IINDT) Trikarsa Equalita, Block C, No 12, Sei Panas, Batam, Indonesia 29433
T: +62 778 472 122 Contact: Hendra Wijaya E: hendra@iindt.com for Training Coordinator E: admin@iindt.com for courses E: vincent@iindt.com for examinations
2 W
1,2 W
1,2 W,F,C
1,2 W,F,C
1,2
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
14
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
MALAYSIA – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
TWI TECHNOLOGY (S.E.ASIA) SDN BHD No. 1, Jalan Utarid U5/13, Section U5,
40150, Shah Alam, Selangor Darul Ehsan
Contact: Noorhaslinda Binti Ahmad Nasir T: +603-7848 1000 E: inquiry@twisea.com W: www.twitraining.com
2 W
1,2 W
TOFD
PA
1,2 W,F,C,
A
1,2 W,F,C,
A
Ruane-TATI Sdn Bhd (Terengganu Advanced Technical Institute) PT 4847, Jalan Panchor, Telok Kalong, 24000 Kemaman, Terengganu Malaysia
Contact: Azmil Mohamad T: +609 863 1033 E: azmil.mohamad@ruane-tati.com W: www.ruane-tati.com
2
W b & l
1,2 W
1,2 W,F,C
1,2 W,F,C
1,2
W
1,2
Trident Global Training & Consultancy No. 7 Jalan Cenderai 26, KWSN, Perindustrian, Kota Putri, 81750, Malaysia
Contact: Natarajan Rajappan T: +65 96416878 E: info@mytridentglobal.com
1,2 W
1,2 W
TOFD
PA
1,2 W
1,2 W
1,2
W
MINDT TRAINING & CERTIFICATION SDN BHD
No 18 Jalan Tanjung 13/2, Bandar Sri
Damansara, 52200, Kuala Lumpur, Malaysia
Contact: Tan Hendry E: hendry@mindt.com.my T: + 603 6280 3448
1,2 W
1,2 W
1,2 W
1,2 W
1,2
W
NORWAY Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
APPTRAA GLOBAL AS Eiganesveien 14 4008 Stavanger NORWAY
Contact: Ravindira C Dev T: +47 4558 6749 E: ravin@apptrraglobalas.org E: dr.ananda@apptrraglobalas.org E: apptrra@yahoo.no
1,2 W
1,2 W
1,2
W
1,2
W
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
15
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
SINGAPORE – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
A-Star Training and Consultancy Pte Ltd #05-109 18 Boon Lay Way Tradehub 21 Singapore, 609966
Contact: Shaik Khaja Mohiuddin T: +65 6465 0877 E: astar@astar-training.com W: www.astar-training.com
2
W b
1,2 W
TOFD PA
1,2
W
1,2
W
SETSCO Services PTE Ltd 18 Teban Gardens Crescent, Singapore 608925
Contact: Sze Thiam Siong T: +65 6566 7777 E: nahhs@setsco.com E: marketing@setsco.com W: www.setsco.com
1,2 W,A
1,2 W,A
PA
1,2 W,F,C,
A
1,2 W,F,C,
A
1,2 A
SOUTH AFRICA – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
African NDT Centre (Pty) Ltd 224 Witch-Hazel Avenue Highveld Technopark Centurion South Africa
Contact: Debbie Myburgh Contact: Evashan Maistry-Thavar T: +27 (0) 12 665 3248 E: debbie.myburgh@andtc.com E: evashan.thavar@andtc.com W: www.andtc.com
1,2 W
2 W
1,2 W
PA
W,F,C
1,2 W,F,C
1,2 W,F,C
1,2 W1
1,2 W,F,C
1,2
Non-Destructive Academy of South Africa CC (NASA Durban branch) 3 Pastoll Road, Sarnia 3610, Durban, South Africa
Contact: Nish Kanaye T: +27 (0) 31 708 3433 E: academy@nondestructive.co.za / nish@nondestructive.co.za W: www.nondestructive.co.za
2 W
1,2 W
1,2 W
1,2 W
1,2 W
1,2
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
16
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
THAILAND – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
A-Star Thailand – Master Solution Co Ltd. 41/19 Sermsuwan Road, T.Maptaphut A Muangrayong, Rayong 21150
Contact: Gaurav Kaushik T: +66 38 691 152/3 E: gaurav@astar-training.com W: www.astar-training.com
2
Wb
1,2 W
PA (W)
1,2
TOFD 1,2
1,2 W
1,2 W
UNITED ARAB EMIRATES UAE – Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM
WENS TECHNICAL AND OCCUPATIONAL
SKILLS TRAINING LLC
PO BOX 393179, Unit 2F-A-02, Empire
Heights, Tower A, Business Bay, Dubai,
UAE
Contact: Babu Sajeesh Kumar
T: +971 4554 6284
+971 5624 28507
E: wensdubai@gmail.com
2 W
2 W,C
1,2 W
TOFD
1,2 W
PA(UT)
1,2 W,F,C
1,2 W,F,C
1,2 W,F,C
1,2
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
17
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
USA - Name of Approved Training Organisation & Contact Details
RT RI CRT UT MT PT ET VT WI ACFM ISI UT
LAVENDER INTERNATIONAL NDT
University Business Park, Suite G.
15200 Middlebrook Dr.
Houston Texas
77058
United States
Contact: Michelle Chapman T: +44 (0) 1226 765 769 E: michelle@lavender-ndt.com W: www.lavender-ndt.com
1,2 W,F,C
2
W,C
1,2
W,F,C
1,2 W,F,C
TOFD PA –
W,F,C
1,2 W,F,C
1,2 W,F,C
1,2
F g
1,2
W e
1,2
W,F,C 2 1,2 ISI UT
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
18
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
PART 2
Courses listed below have been independently accredited as meeting specific criteria (generally outside the scope of PCN)
Note: Courses listed below have been designed to meet specific industrial requirements as defined by the course title. Each course is available only at the stated
training organisation. Individuals and employers are advised to study in detail the course content to ensure that it adequately meets their requirements.
Training Organisation Contact Method(s)
Aerospace Inspection Training Ltd Units 9 & 10 Takeley Business Centre Dunmow Road Takeley, Stansted Airport Bishop’s Stortford Essex, CM22 6SJ
Contact: Samantha Wright T: +44 (0) 1279 870276 E: samantha.wright@aerospacendt.co.uk W: www.aerospacendt.co.uk
• Infrared Thermography (Aero)
• Acid Etch Inspection
• Bond Testing of structures using the Staverley Bondmaster
IMechE Engineering Training Solutions 4 Europa View Sheffield Business Park Sheffield S9 1XH
Contact: Howard Garlick T: +44 (0)114 399 5751 E: h_garlick@imeche.org W: http://trainingsolutions.imeche.org
• Acid Etch Inspection
• Hardness Testing
• Conductivity Testing
• Ultrasonic Testing of Wrought Plate including Thickness Gauging (ISO 20807)
• Anodic Testing
• MT Rail Upgrade
• PT Rail Upgrade
• 26 week NDT/Inspection Training Programme
• BGAS Transition to PCN Weld Inspector level 2
• Infrared Thermography level 1 (SNT-TC-1A)
International School of Aerospace NDT Unit 2, Beech Avenue Taverham Norwich NR8 6HW
T: +44 (0) 1603 260148. E: info@isandt.co.uk E: Waynewayne.middleton@ISANDT.CO.UK W: www.isandt.co.uk
• Infrared Thermography (Aero)
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
19
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
Training Organisation Contact Method(s)
Lavender International NDT Unit 7, Penistone Station Sheffield S36 6HP
Contact: Beverley Scott T: +44 (0) 1226 765 769 E: enquiries@lavender-ndt.com W: www.lavender-ndt.com
• Eddy Current Testing
of Non-Ferromagnetic
Tubes
• Acid Etch Inspection
• Hardness Testing
• Conductivity Testing
• Anodic Flaw Detection
• Composite Materials
(courses also available
at TQCC/Lavender
Greece)
NDT Centre (Oceaneering Inspection) 109 Bowesfield Lane Stockton-on-Tees TS18 3HF
Contact: Melanie Holland T: +44 (0) 1642 604 661 E: mholland@oceaneering.com
• Profile Radiography GE Rad View Software Specific
• Computed Radiography GE Rad View Software Specific
• Ultrasonic Time of Flight Diffraction (Basic and Advanced)
Training Organisation Contact Method(s)
NDT Consultants Ltd Middlemarch House, Siskin Drive Coventry CV3 4FJ
Contact: Linda Dulay T: +44 (0) 24 7651 1151 E: sales@ndt-consultants.co.uk W: www.ndt-consultants.co.uk
• Acid Etch Inspection
• Anodic Flaw Detection
• Conductivity Testing
• Hardness Testing
• Visual Inspection
• Coating Thickness
measurement
• Bond Testing
Element Materials Technology Sheffield – Maltravers Maltravers Road Sheffield South Yorkshire , S2 5AD
Contact: Mr S Sennett P +44 (0)1142 808 064 O +44 (0)1142 727 317 ext. 76664 F +44 (0)1142 727 319 Steve.Sennett@element.com www.element.com
• Ultrasonic Testing Thickness and Laminations ISO 20807
South West School of NDT Merton House Croescadarn Close Pentwyn Cardiff, CF23 8HF
Contact: Michelle Clapham T: +44 (0) 292 054 0000 E: michelle.clapham@minton.co.uk W: www.swsndt.co.uk
• Acid Etch Inspection
• Hardness Testing
• Conductivity Testing
• Anodic Testing
• Laser Shearography (Aero)
• Infrared Thermography (Aero)
TQCC/Lavender Greece Z Pigis 51 382 22 Volos Greece
Contact: Athena Xirofotou T: +30 24210 59881 E: tqcc@vol.forthnet.gr W: www.ketepe-ndt.com
• UT Castings (SNT)
• RI/RT Castings (SNT)
TCS NDT 19 Weymouth Boulevard, Quinn’s Rocks, Perth WA Australia 6030
Contact: Alisa Hewling T: +61 (0) 415 573095 E: info@tcsndt.com.au
• Critical Ultrasonic Assessment of Welds Defects
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
20
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
Training Organisation Contact Method(s)
W: www.tcsndt.com.au
Training Organisation Contact Method(s)
Tri Service School of NDT NDES, RAF Wittering, Peterborough, Cambridgeshire PE8 6HB
Contact: Guy Lawton T: +44 (0) 1780 417138 E: Guy.Lawton173@mod.gov.uk E: 71irsqn-ndttrg01@mod.uk
• 10 week Aerospace NDT Technicians Course
TWI Aberdeen Unit 20 Spires Business Centre Mugiemoss Road, Bucksburn Aberdeen, AB21 9BG
Contact: Andrew Jeffreys T: +44 (0) 1224 691 222 E: andrew.jeffreys@twi.co.uk W: www.twitraining.com
• Ultrasonic Testing of Wrought Plate including Thickness Gauging (ISO 20807)
TWI - Training & Examination Services Granta Park Abington Cambridge CB21 6AL
Contact: Michal Skerik T: +44 (0) 1223 899 500 E: trainexam@twitraining.com W: www.twitraining.com
• Ultrasonic Testing of Wrought Plate including Thickness Gauging (ISO 20807)
TWI Technology and Training Centre (North East) Ferrous Road Riverside Park Middlesbrough TS2 1DJ
Contact: Michal Skerik T: +44 (0) 1223 899500 E: trainexam@twitraining.com W: www.twitraining.com
• Ultrasonic Testing of Wrought Plate including Thickness Gauging (ISO 20807)
NDE Institute of Trinidad Ltd 15 Robertson Street, Les Efforts East, San Fernando, Trinidad W.I.
Contact: Sonny James T: (868) 653 9343 E: info@learnndt.com W: www.learnndt.com
• Ultrasonic Testing of Wrought Plate including Thickness Gauging (ISO 20807)
Talon NDT Blackpool Ltd 1 & 2 Keystone Court Hallam Way, Blackpool Lancashire FY4 5NZ
Contact: Suzanne Judge T: +44 (0) 1253 696400 E: info@cjis-ltd.com W: www.talonndtblackpool.com
• Ultrasonic Testing of Wrought Plate including Thickness Gauging (ISO 20807)
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
21
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
PART 3 Historically, a number of Approved Training Organisations have offered level 3 training courses. By definition, these courses must be tailored to meet the
needs of individual candidates. Please refer to the Foreword on page 2.
Note: The following organisations have been recognised by BINDT as providers of individually designed level 3 training packages.
Training Organisation Contact
IMechE Engineering Training Solutions 4 Europa View Sheffield Business Park Sheffield S9 1XH
Contact: H Garlick T: +44 (0) 114 399 5751 E: arl@imeche.org W: www.imeche.org
International School of Aerospace NDT Unit 2, Beech Avenue Taverham Norwich NR8 6HW
T: +44 (0) 1603 260148. E: info@isandt.co.uk E: Waynewayne.middleton@ISANDT.CO.UK W: www.isandt.co.uk
Lavender International NDT Unit 7, Penistone Station Sheffield S36 6HP
Contact: Beverley Scott T: +44 (0) 1226 765 769 E: enquiries@lavender-ndt.com W: www.lavender-ndt.com
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
22
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
Training Organisation Contact
South West School of NDT Merton House Croescadarn Close Pentwyn Cardiff, CF23 8HF
Contact: Michelle Clapham T: +44 (0) 292 054 0000 E: training@minton.co.uk W: www.swsndt.co.uk
TWI Aberdeen Unit 20 Spires Business Centre Mugiemoss Road Bucksburn Aberdeen AB21 9BG
Contact: Andrew Jeffreys T: +44 (0) 1224 691 222 E: andrew.jeffreys@twi.co.uk W: www.twitraining.com
TWI - Training & Examination Services Granta Park Abington Cambridge CB21 6AL
Contact: Michal Skerik T: +44 (0) 1223 899 500 E: trainexam@twitraining.com W: www.twitraining.com
TWI Technology and Training Centre (North East) Ferrous Road Riverside Park Middlesbrough TS2 1DJ
Contact: Michal Skerik T: +44 (0) 1642 216320 E: michal.skerik@twi.co.uk W: www.twitraining.com
SGS (Shanghai) NDT Training & Examination Centre SGS-CSTC Standards Technical Services Co Ltd, 2F, Building 8, No 69, 1159 East Kangqiao Road Pudong District Shanghai 201319 P.R. China
Contact: Jason Taylor M: +44 7825 099176 E: Jason.Taylor@sgs.com W: www.sgs.com
ATTAR Unit 1, 64 Bridge Road Keysborough, Victoria 3173 Australia
Contact: Paul Grosser T: +61 3 9574 6144 E: paulgrosser@attar.com.au W: www.attar.com.au
Serco Limited Room 130 Stephenson House RTC Business Park London Road Derby DE24 8UP
Contact: Paul Seaton T: +44 (0)1332 264 782 E: paul.seaton@serco.com
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
23
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
Training Organisation Contact
WENS TECHNICAL AND OCCUPATIONAL SKILLS TRAINING LLC
PO BOX 393179, Unit 2F-A-02, Empire Heights, Tower A, Business Bay, Dubai, UAE
Contact: Babu Sajeesh Kumar
T: +971 4554 6284
T: +971 5624 28507
E: wensdubai@gmail.com
SETSCO Services PTE Ltd 18 Teban Gardens Crescent
Singapore 608925
Contact: Sze Thiam Siong T: +65 6566 7777 E: marketing@setsco.com W: www.setsco.com
NDT Consultants Ltd Middlemarch House, Siskin Drive Coventry CV3 4FJ
Contact: Linda Dulay T: +44 (0) 24 7651 1151 E: sales@ndt-consultants.co.uk W: www.ndt-consultants.co.uk
African NDT Centre (Pty) Ltd 224 Witch-Hazel Avenue Highveld Technopark Centurion South Africa
Contact: Evashan Maistry-Thavar T: +27 (0) 12 665 3248 E: evashan.thavar@andtc.com W: www.andtc.com
LAVENDER INTERNATIONAL NDT
University Business Park, Suite G.
15200 Middlebrook Dr.
Houston Texas
77058
United States
Contact: Beverley Scott T: +44 (0) 1226 765 769 E: enquiries@lavender-ndt.com W: www.lavender-ndt.com
AEROSPACE INSPECTION TRAINING LTD
Units 9 & 10 Takeley Business Centre
Dunmow Road, Takeley
Bishops Stortford, CM22 6SJ
Contact: Samantha Wright T: +44 (0) 1279 870276 E: Jayn.lone@aerospacendt.co.uk E: samantha.wright@aerospacendt.co.uk W: www.aerospacendt.co.uk
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
24
ISSUE NO 158
DATE 21st February 2019
REF APP-LIST-NDT
Training Organisation Contact
TAIKOO (Xiamen) AIRCRAFT ENGINEERING CO LTD Guandian Second Road, Huli District Xiamen 361006
Contact: Lei Yue T: (86) 592 5737 290 E: leiyue@haeco.com
Xiamen United Technology Center Ltd Wu Han Building 261 Jai He Lu, Building 1 Room 9C Xiamen P.R.C
Contact: Raymond Ho T: (86) 592-5083 118 E: raymond@yahoo.com.hk