2009 YEARNEW REGISTRED BRAND NAMES

Brand new developed for continuous process control. Portabledevices allows repeatable measurements in tank without/withsampling.

LEMIS instruments brand merges laboratory/portablemeters for high-accuracy repeatable measurements in fieldor laboratory conditions.

Tree of LEMIS process presentation

General information

LEMIS process products

LEMIS process news

Measurements

Applications

The largest projects

Corporate mission

Continuous control meters

Portable meters

Company history

LEMIS awards

LEMIS Certificates

Promotion & Presence

Calibration, Accuracy, Ranges

AN INDIVIDUAL APPROACH TO THE CUSTOMER

HIGH QUALITY OF THE PRODUCTS AND SERVICES

LOCAL SUPPORT

• Continuous development and improvement of our products,in accordance to the customers application and their needs

• Local after sales support

• Training

• Installation

• Development of new products (Level measurements; Combined Density and Level measurements)

• Spares available at stock in India

• Reduced time of repairs

guarantees

LOCATION

ENERGIZING THE FUTURE

Ceylon Petroleum Corporation

LEMIS process customers

Company structure

President

Vice-president

Executive directorNetwork manager

Development department Chief

Office manager Finance department

Personnel department

Supply department

Laboratory

Sales and marketing department

Division of technical control

Manufacturing department

Quality management representative

LEMIS process the largest projects

2004 Nevskiy Mazut (Russia) – supply and installation of online density sensors DC-40 for petroleum products.

2004 Ukrainian Customs – supply of density meters for control of the petroleum products quantity and quality.

2004 Latvian Customs – supply and installation of density meters for control of the petroleum products quantity and quality.

2005 PETRONET (South Africa) – supply of density meters for control of the petroleum products quantity and quality.2005 National Reserves (Romania) – supply of density meters for control of the petroleum products quantity and quality. 2005 ASRIN Laboratory (Turkey) – supply of density meters for petroleum application.2005 Romanian Customs – Further Strengthening of the Border Management and Control.(Eiropaid/116463/D/S/RO)

2006 Indian Customs – Hindustan Petroleum Corporation Limited. Phase 1.

2007 Indian Customs – Hindustan Petroleum Corporation Limited. Phase 2.

2008 Indian Customs – Hindustan Petroleum Corporation Limited. Phase 3.

2009 Indian Customs – Hindustan Petroleum Corporation Limited. Phase 4.

LEMIS process the largest projects

• AUTOMATION• CONTINUOUS CONTROL• ONLINE AND IN-FLOW MONITORING

to measure:• DENSITY• LEVEL• VISCOSITY• TEMPERATURE• COMBINED DENSITY, LEVEL AND TEMPERATURE

includes the product range for:

Corporate mission

To develop, manufacture,

maintain a high quality measuring equipment

for our customer’s needs and there

satisfaction.

COMPANY HISTORY

1991 LEMIS Baltic was founded, as a development and manufacturing company of measuring equipment

1992 The development of LEMIS Baltic first density meter D921 (for on-situ density measurements - inside the tanks)

1994 Serial production of second generation density meters DM-230

2002 LEMIS Baltic became an ISO 9001:2000 certified company2003 Development and starting of serial production of laboratory

density meters Di-series2004 Development and starting of serial production of industrial

density meters DC-series2005 ATEX certification of the Company2007 Expand manufacturing facility2008 LEMIS India branch office opening; new testing & calibration

laboratory opening in Latvia, EU 2009 LEMIS USA branch opening; new age of meters production,

such as DC-30, MFM-50, DLG-400, DM-250 SERIES and many others…

LEMIS process measures everything you need

LEMIS process measures everywhere you need

ü Cylinder shape has symmetric geometry

ü Repeatable mechanical manufacturing

ü Repeatable metal structureü Low own mass of the sensorü Washed on either side by

measured liquid eliminates pressure effect

ü Allows both density and viscosity measurement

ü Ni-Span-C material offering low temperature expansion factor

Resonant tube advantages

MFM-50DC- 60

DC-50* SERIES: G-type, S-type, T-type

CONTINUOUS CONTROL METERSIN-LINE MEASUREMENTS

*Combined type measures both density and viscosity

DC-30* SERIES

CONTINUOUS CONTROL METERSIN-TANK MEASUREMENTS

DC- 40 TRIO

DC- 40* SERIES: F-type, D-type, R-type

DC-70

DLG-400

*Combined type measures both density and viscosity

PORTABLE METERS

Portable meters are best suited for liquid parametersmeasurements directly in the storage or process tanks (up to 30 meters depth). Instead, the sensor are submersed at any required level and record spot liquid characteristics.

DM-250.1*

DM-250.3*

DM-250.2**Combined type measures both density and viscosity

Calibration

Calibration of LEMIS process is

performed in-house according

ISO9001:2000 quality

assurance program by using

calibration materials that are

traceable to national standards.

In-house calibration and testing

is performed specified

dedicated calibration protocol

for every standard model of the

sensor. For most applications,

on-site calibration is generally

not required. LEMIS process

sensors allows simple, switch-

and-go field installation.

Advantages

Continuous measurements

Easy cleaning

High accuracy

Simple installation

Suitable for very viscous liquids

Wide range of applications

Rigorous factory calibration

Automatic temperature compensation

Compact design

Operating rangesDynamic Viscosity0 to 1200 mPa·s (0 to 1200 cP)

Density 0 to 2000 kg/m3 (0 to 16.7 lb/gal US)

Process Temperature-200°C to +200°C (-328°F to +392°F)

Mass Flow 0…40000 kg/h

Flow 0…40 m3/h

Dynamic Viscosity±1% (measured value)

Density ±0.2 kg/m3 (±0.0017 lb/gal US)±0.5 kg/m3 (±0.0042 lb/gal US)±1.0 kg/m3 (±0.0083 lb/gal US)

Temperature ±0.1°C (±0.2°F)

Mass Flow±0.2% (measured value)

Flow±0.1% (measured value)

Accuracy

LEMIS Awards

Exporter of the Year

2005

Exporter of the Year

2006

LEMIS CertificatesQuality certification

Explosion-proof equipment certification

– Gulf Coast Conference GCC 2009 (Galveston Texas, USA)

– PETROTECH-2009(New Delhi, India)

– ACHEMA 2000, 2003, 2006, 2009 (Frankfurt, Germany)

– PITTCON 2006 (Orlando, USA)

– ANALYTICA 2004 (Munich, Germany)

– OIL & GAS 1999, 2000, 2002 (Moscow, Russia)

– KEMIA 1999 (Helsinki, Finland)

Promotion

StocExpo

The Storage Terminal Operators’Conference & Exhibition

March 30th – 1st April 2010(Antwerp Expo, Belgium)

Planned Promotion

For more information, please, visit LEMIS process web site!

Thank you for Your attention !