Post on 11-Sep-2021
10000 Alliance Rd. • Cincinnati, OH 45242 • (513)793-3200 • F
10000 Alliance Rd. • Cincinnati, OH 45242 • (513)793-3200 • Fax: (513)984-1335 • www.lsi-industries.com
©2013 LSI INDUSTRIES INC.
LED PETROLEUM LighTing CaTaLOg
F I R S T E D I T I o N
Last Updated September 2013Individual Data Sheets May be More Current
We are a vertically integrated manufacturer who combines assimilated
technology, design and manufacturing to produce the most efficient,
high quality products possible. We are dedicated to advancing solid-
state technology to make affordable, high performance, energy
efficient lighting and custom graphic products that bring value to our
customers. In addition, we can provide sophisticated lighting and
energy management control solutions to help customers manage their
energy performance.
Leadership. Strength. innovation.Those are the key values behind the smart vision on which LSI Industries Inc. was built when established in 1976. Today and in the future, we will emphasize our commitment
to preserving the foundation of a well-managed, financially strong and creatively unique company with even stronger emphasis on a growing technology base.
Cross over to solid-state lighting with lsi
Through our market-leading Crossover LED technology platform we create extraordinary value by providing reliable LED products expertly designed to deliver the best possible illumination for the application in terms of see-ability, visual comfort, aesthetics and minimum energy consumption.
experience Makes the differenceLSI has more experience in fixture design and manufacturing than any other LED company – we have more LED experience than any other lighting manufacturer. We have been very deliberate in the development of our LED products.
investing in our FutureLSI is committed to advancing technology throughout all aspects of our business – in both product solutions and production techniques. We are committed to American innovation through technology.
Protecting Your investmentOur LED fixtures go through rigorous testing in our UL / ETL certified lab and are tested and listed to UL standards by independent labs to ensure we are delivering the best, most reliable product available.
Backed by lsi We back our LED product with a comprehensive 5-year warranty and the strongest service team in the market. We are so convinced that our experience and expertise will meet your lighting application that we prominently display the LSI logo on all of our LED products, giving you peace of mind that comes with knowing that we stand confidently by all of our products.
the lsi difference is in the intelligence
intelligent thermal Control Heat Management – LSI’s unique, patented heat management design provides optimal system efficiency to create the lowest internal operating temperatures possible. Fixture temperature lowers automatically when needed in impercepti-ble 5% increments until a safe operating temperature is reached. Controlling the potential overheating increases the lifespan of the fixture.
Brilliantly engineered optics Tri-Lume™ Optics – The unique combination of a sealed flat optical grade tempered glass lens, high-efficiency precision reflectors and optimized LEDs translates to outstanding illumination and light placement. The glass lens is 5 times more impact resistant than standard glass and protection of electrical components. LSI’s IP67 sealed optics provide high color rendering and color consistency.
the Most efficient led FixturesWith a variety of drive currents, high performance LEDs and unique heat management, LSI’s LED fixtures delivery tremendous performance. Our goal is the maximum number of lumens using the minimal number of watts for the quickest payback possible.
energy savings up to 80% (target Payback of < 3 Years)Driver & Power Supply – Proprietary self-diagnostic SmartTec Intelligence for highest efficiency plus energy-saving control options.
the lsi difference is in the intelligence
smarttec™ intelligence LSI’s proprietary patented intelligence platform utilizes internal and external components for optimal system efficiency. Each fixture is designed to perform for a specific lighting application.
duragrip® Finishing ProcessCommitted to excellence in all its products, LSI Industries applies the same high quality standards to our finishing process as we do the fabrication of our products. Each LSI fixture, pole and brackets are finished with our patented DuraGrip polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling and is guaranteed for a full five years.
Beauty to Complement the intelligenceSleek contemporary and traditional housing designs represent the ultimate blend of design sophistication and technological innovation in an aesthetically pleasing fixture. With clean lines and architectural styling, LSI’s fixtures are sure to complement any site.
As a vertically integrated manufacturer, we design and build our products around our value driven design philosophy. Integrated intelligence combines with components designed, engineered and manufactured by LSI to work in unison to deliver the most reliable, energy efficient and cost effective LED lighting solutions possible.
lighting Control at Your Fingertips
In yesterday’s world, turning ALL of your outdoor lights on for 12 hours a night was ok…
In yesterday’s world, not knowing if your lights were on, off or burned out was ok…
In yesterday’s world, having bright spots and dark spots was ok…
In yesterday’s world, wasted energy and money was ok…
Today – none of these are acceptable. And up until now, you had to find wireless controls and stellar LEDs from separate vendors.
LSI Industries has introduced the world’s first and only fully integrated LED fixtures with wireless controls. These controls allow remote access to the fixture, from anywhere in the world, when it is convenient for you. Think about the convenience of knowing how much you are saving, knowing about issues much sooner, and having the information and the data to support cash back from utilities and incentive programs. LSI is transforming the LED lighting market with the next generation of functionality, performance and now information and accessibility.
LSI Controls + LSI LED• Designed, produced and delivered as an integrated system• Tested as a system to ensure component compatibility• Certified as a system to ensure safety and reliability• Assembled and delivered with speced controls installed at
the LSI factory to reduce onsite installation and variable costs
LSI – One Source for Value, Reliability and Efficiency
enabled
enabled
So why add controls? There are some immediate answers – environmental stewardship,
money savings, and flexibility. In addition to more than a 60% energy savings, most LSI
customers see a radical improvement in the look and feel of the light. They are able to
“tune” the environment in ways that were never available before as a result of the integrated
LSI Virticus Controls. This includes the reduction of light after business hours which helps
the local community sleep better. Add in some motion sensors that can control all the lights
and you have optimal safety levels of light where you want the light. With LSI Virticus you
take control of your light – putting it where you want it, when you want it.
Before - Using HID
After - Using LED and Virticus
TABLE OF CONTENTS
LED Area Light - Patriot® Small (XPTS3) . . . . . . . . 52LED Area Light - Patriot® (XPT3) . . . . . . . . . . . . 54
LED Retrofit Kit for Patriot® (XPT3K) . . . . . . . . . . 56
LED Constitution (XCN3) . . . . . . . . . . . . . . . . . . . 58
LED Enterprise (XENM3) . . . . . . . . . . . . . . . . . . . 60
LED Intrepid (XINM3) . . . . . . . . . . . . . . . . . . . . . . 62
LED Lexington (XLXM3) . . . . . . . . . . . . . . . . . . . . 64
Poles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Pole Selection Guide . . . . . . . . . . . . . . . . . . . . . . . 84Windspeed Map . . . . . . . . . . . . . . . . . . . . . . . . . . 85Pole Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
BOLLARD & INGROUND
LSI Greenlee® LED Inground Light (XIG) . . . . . . . . .94
LSI Greenlee® LED Spec Grade Bollard (XHYP3) . . . 96
LED Bollard Light (XBVRD) . . . . . . . . . . . . . . . . . 98
EXTERIOR CEILING/SOFFIT
LED Linear Profile Garage Light (XLPG) . . . . . . . 100
LED Gen3 Parking Garage Light (XPG3) . . . . . . . 102
LED Recessed Soffit Light (XSL2) . . . . . . . . . . . 104
LED 6" Wet-listed Downlight (PDL6K) . . . . . . . . 106
WALL MOUNT
LED Challenger® Wall Sconce (XCHWM3) . . . . . 108
LED Greenbriar® Wall Sconce (XGBWM3) . . . . . 110
LED Patriot® Wall Sconce (XPWS3) . . . . . . . . . . 112
CANOPY
LED Canopy Light - LegacyTM (CRU) . . . . . . . . . . . 8LED Canopy Light - Scottsdale® LegacyTM . . . . . . .
(CRU SCDL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10LED Canopy Light - LegacyTM Universal SuperKit 2x2
(CRUK UNV) . . . . . . . . . . . . . . . . . . . . . . . . . . . 12LED Canopy Light - Scottsdale® LegacyTM . . . . . . .
Universal SuperKit 2x2 (CRUK UNV SCDL) . . . . 14LED Canopy Light - LegacyTM Recessed SuperKit
(CRUK REC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16LED Canopy Light - Scottsdale® LegacyTM Recessed
SuperKit (CRUK REC SCDL) . . . . . . . . . . . . . . . 18LED Canopy Light - LegacyTM Double Deck . . . . . . .
(CRU DDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20LED Canopy Light - Scottsdale® LegacyTM Double
Deck (CRU DDM SCDL) . . . . . . . . . . . . . . . . . . . . . . 22
LED Generation 3 Focus (CRO3) . . . . . . . . . . . . . 24
LED Canopy Light - LegacyTM Surface Mount (CRU SM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26LED Canopy Light - Scottsdale® LegacyTM Surface
Mount (CRU SM) . . . . . . . . . . . . . . . . . . . . . . . . 28
AREA LIGHTING / POLES
LED Area Light (PASU) . . . . . . . . . . . . . . . . . . . . . 30
LED Roadway Light (PRSU) . . . . . . . . . . . . . . . . . 32
LED Area Light - Small (XASU) . . . . . . . . . . . . . . 34
LED Roadway Light - Small (XRSU) . . . . . . . . . . . 36
LED Area Light - AeroMax™ (XAMU) . . . . . . . . . . 38
LED Roadway Light (XRMU) . . . . . . . . . . . . . . . . 40
LED Area Light - Sterling™ (XSB) . . . . . . . . . . . . . 42
LED Area Light - Challenger® Medium (XCHM3) . .44
LED Retrofit Kit for Challenger® Medium (XCHM3K) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
LED Area Light - (XGB3) 128 . . . . . . . . . . . . . . . . 48LED Area Light - (XGB3) 176 . . . . . . . . . . . . . . . . 50
TABLE OF CONTENTS
LED Wall Lights (XAWU/XAWMU) . . . . . . . . . . . 114
LED Escalante Recessed Wall/Step Light (XESS/XESR) . . . . . . . . . . . . . . . . . . . . . . . . . . 116
LED Flood Light - Medium (XFLM) . . . . . . . . . . . 118
LINEAR EXTERIOR
LED Linear Wide Fascia (LWF) . . . . . . . . . . . . . . 120
LED Linear Wall Wash (LWW) . . . . . . . . . . . . . . 122
LED Soffit Strip (LSS) . . . . . . . . . . . . . . . . . . . . . 124
INDOOR/OUTDOOR DESIGNER
LSI Abolite® LED Angled Reflector (AD) . . . . . . . 126
LSI Abolite® LED Deep Bowl (BD) . . . . . . . . . . . 128
LSI Abolite® LED Radial Wave (RWD) . . . . . . . . 130
LSI Abolite® LED Standard Dome (RD) . . . . . . . 132
LSI Abolite® Mounting Accessories . . . . . . . . . . 134
INTERIOR AMBIENT - OPEN CEILING
LED High Bay Light (XHB3) 128 . . . . . . . . . . . . . 136LED High Bay Light (XHB3) 176 . . . . . . . . . . . . . 138
INTERIOR AMBIENT - GRID CEILING
LED High Efficiency, Expansive Cavity Recessed (ASC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
LED Peak Efficiency Recessed Direct/Indirect (PEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
LED High Efficiency Troffer - Static (GA24/GA22) . . . 142
LED Recessed Troffer (XRT) . . . . . . . . . . . . . . . 143
LED Dome Wrap Surface/Pendant Mount (DW) . . . 144
LED Low Profile Wraparound (WNA) . . . . . . . . . 145
LED High Intensity Ambient (CIRU) . . . . . . . . . . 146
WALL WASH & ACCENT
LED Linear Display Light (LDL2) . . . . . . . . . . . . 148LED Linear Close Proximity Light (LSL2) . . . . . . 149LED Linear High Output Light (LXLC) . . . . . . . . . 150LED Linear High Output Light (LXLW) . . . . . . . . 151
LED Linear Accessories . . . . . . . . . . . . . . . . . . . 152
LED Micro Wall Wash (MWW) . . . . . . . . . . . . . . 154
LED Duetto® (DUT 201) . . . . . . . . . . . . . . . . . . . 155
LED Track-in-the-Box (111) . . . . . . . . . . . . . . . . 156
LED Wall/Ceiling Mount (W44) . . . . . . . . . . . . . . 157
COOLER/BEER CAVE & UTILITY
LED Gen3 Parking Garage Light (XPG3) . . . . . . . 158
LED Enclosed & Gasketed - Angled Lens (EG3) . . . 160
DOWNLIGHTING
LED 6" Architectural Downlight (ADL6) . . . . . . . 161
LED 6" Downlight (PDL6K) . . . . . . . . . . . . . . . . . 162
LIFE SAFETY
LED Combo Exit/Emergency (Bottom Heads) (LEPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
LED Combo Exit/Emergency (Side Heads)(LPRX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Thermoplastic LED Emergency (LTEM) . . . . . . . 166
Wet Location Emergency (LSWL) . . . . . . . . . . . . 167
Remote Heads . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Terms & Conditions . . . . . . . . . . . . . . . . . . . . . . 170Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
09/13/13
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
8
CA
NO
PY
SMARTTEC™ ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS), High Output (HO), or Very High Output (VHO) .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a clear tempered glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a flat glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
HAZARDOUS LOCATION - Designed for lighter than air fuel applications . Product is suitablefor Class 1 Division 2 only when properly installed per LSI installation instructions .
DRIVER - State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
DRIVER HOUSING - Die cast aluminum, wet location rated driver/electrical enclosure is elevated above canopy deck to prevent water entry, provide easy “knock-out” connection of primary wiring and contributes to attaining the lowest operating temperatures available . Seals to optical housing via one-piece molded silicone gasket .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - One person installation . No additional sealant required . Installs in a 12” or 16” deck pan . Deck penetration consists of a 4” hole, simplifying installation and water sealing . Unit is designed to quickly retrofit into existing Scottsdale (4”) hole as well as openings for Encore and Encore Top Access and to reconnect wiring for the SC/ECTA without having to relocate the conduit . Retro panels are available for existing Encores (see back page) as well as kits for recessed and 2x2 installations (see separate spec sheets) . Support brackets are provided standard, to prevent sagging of deck .
SHIPPING WEIGHT - 25 pounds (single pack), 50 pounds (double pack) .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL and ETL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
LED CANOPY LIGHT - LEGACYTM (CRU)US & Int’l. patents pending.
Class 1, Division 2 – Standard on HO, SS, MW & LW only
T5 Temperature Classification – The surface temperature of this product will not rise above 100°C ., within a 40°C ambient .
Gas Groups A,B,C, and D – Group A: Acetylene / Group B: Hydrogen / Group C: Propane and Ethylene / Group D: Benzene, Butane, Methane & Propane .
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
wet location
IP67wet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
9
CA
NO
PY
Prefix OptionsColor Temperature
CRU SC - Standard Symmetric
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347V1
2L - Bi-Level Switching2
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRU SC LED SS CW UE WHT
LW - Low WattMW - Mid WattageSS - Super SaverHO - High Output
VHO - Very High Output
Drive Current
ACCESSORY ORDERING INFORMATIONDescription Order Number
(Accessories are field installed)
Retrofit Panels - EC / ECTA / SCF to CRU, for 16" Deck Panel 525946Retrofit Panels - ECTA / SCF to CRU, for 12" Deck Panel 530281Retrofit 2x2 Cover Panel Blank (no holes) 357282Retrofit RIC Cover Panel Blank (no holes) 354702
Description Order NumberKit - Hole Plugs and Silicone (enough for 25 retrofits)1 1320540CRU FKL - Flange Kit2 537530WHT1- Consists of (25) 7/8" hole plugs and (1) 10.3 oz tube of RTV2- Flange Kit used to mount CRU in double deck applications
FOOTNOTES:1- 347V only available in HO drive current.2- Bi-Level available on “HO” drive current only.
LED CANOPY LIGHT - LEGACYTM (CRU)
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
HO - High Output
VHO - Very High Output
LIGHT OUTPUT - CRU
Cool
Whi
te
8,438
11,656
13,638
17,001
20,997
76
103
129
149
192
111
113
106
114
109
7 1/8”(181 mm)
12 1/4”(311 mm)
7 1/8”(181 mm)
12 1/4”(311 mm)
7 3/4”(198 mm)
20 3/4” (528 mm) 20 3/4” (528 mm)
26 3/8”(671 mm)
26 3/8”(671 mm)
20 3/4” (528 mm)
3/4”(19 mm)
3 3/4”(94 mm)
DIMENSIONS
Retrofit Panels Installed
CRU FKL (for double deck applications)
3/4” (20 mm)
14” (356 mm)
1 9/16” (39 mm)
6 15/16”(177 mm)
CANOPY
TOP PAN
20 3/4”(528 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
10
CA
NO
PY
SMARTTEC™ ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS) .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a dropped, boroscilicate, prismatic glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a dropped glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
HAZARDOUS LOCATION - Designed for lighter than air fuel applications . Product is suitablefor Class 1 Division 2 only when properly installed per LSI installation instructions .
DRIVER - State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
DRIVER HOUSING - Die cast aluminum, wet location rated driver/electrical enclosure is elevated above canopy deck to prevent water entry, provide easy “knock-out” connection of primary wiring and contributes to attaining the lowest operating temperatures available . Seals to optical housing via one-piece molded silicone gasket .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - One person installation . No additional sealant required . Installs in a 12” or 16” deck pan . Deck penetration consists of a 4” hole, simplifying installation and water sealing . Unit is designed to quickly retrofit into existing Scottsdale (4”) hole as well as openings for Encore and Encore Top Access and to reconnect wiring for the SC/ECTA without having to relocate the conduit . Retro panels are available for existing Encores (see back page) as well as kits for recessed and 2x2 installations (see separate spec sheets) . Support brackets are provided standard, to prevent sagging of deck .
SHIPPING WEIGHT - 25 pounds (single pack), 50 pounds (double pack) .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL and ETL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
LED CANOPY LIGHT SCOTTSDALE® - LEGACYTM (CRU SCDL)US & Int’l. patents pending.
Class 1, Division 2 – Standard on SS, MW & LW only
T5 Temperature Classification – The surface temperature of this product will not rise above 100°C ., within a 40°C ambient .
Gas Groups A,B,C, and D – Group A: Acetylene / Group B: Hydrogen / Group C: Propane and Ethylene / Group D: Benzene, Butane, Methane & Propane .
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
IP67wet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
11
CA
NO
PY
Prefix Color Temperature
CRU SCDL - ScottsdaleDrop Lens
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347V1
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRU SCDL LED SS CW UE WHT
LW - Low WattMW - Mid WattageSS - Super Saver
Drive Current
ACCESSORY ORDERING INFORMATIONDescription Order Number
(Accessories are field installed)
Retrofit Panels - EC / ECTA / SCF to CRU, for 16" Deck Panel 525946Retrofit Panels - ECTA / SCF to CRU, for 12" Deck Panel 530281Retrofit 2x2 Cover Panel Blank (no holes) 357282Retrofit RIC Cover Panel Blank (no holes) 354702
Description Order NumberKit - Hole Plugs and Silicone (enough for 25 retrofits)1 1320540CRU FKL - Flange Kit2 537530WHT1- Consists of (25) 7/8" hole plugs and (1) 10.3 oz tube of RTV2- Flange Kit used to mount CRU in double deck applications
FOOTNOTES:1- 347V only available in HO drive current.
LED CANOPY LIGHT SCOTTSDALE® - LEGACYTM (CRU SCDL)
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
LIGHT OUTPUT - CRU SCDL
Cool
Whi
te 7,634
10,517
12,538
76
103
129
100
102
97
DIMENSIONS
3/4(19 mm)
20 3/4 (528 mm)
5 9/16(141 mm)
7 1/8(181 mm)
12 1/4 (311 mm)
20 3/4 (528 mm)
8 (204 mm)
26 3/8”(671 mm)
26 3/8”(671 mm)
20 3/4” (528 mm)
CRU FKL (for double deck applications)
20 3/4”(528 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
12
CA
NO
PY
Crossover SuperKits allow you replace many existing 2x2 canopy fixtures (including LSI, Whiteway and Jet-Phillips) without having to know the dimensions of the existing fixture .
SMARTEC ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS), High Output (HO), or Very High Output (VHO) .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a glass lens to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a standard flat glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - Pre-assembled optical unit and mounting panel hinges and fastens to existing fixture housing in place of current door assembly . Driver is pre-mounted to back of CRUK assembly .
SHIPPING WEIGHT - 33 pounds .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
LED CANOPY LIGHT - LEGACYTM UNIVERSAL SUPERKIT - 2X2 (CRUK UNV)US & Int’l. patents pending.
2x2 Housing Not Included
2x2 Housing Must be Ordered Separately, if Needed
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
13
CA
NO
PY
Prefix OptionsColor Temperature
CRUK UNV(Universal 2x2)
SC - Standard Symmetric
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347 Volt1
None
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRUK UNV SC LED SS CW UE WHT
LW - Low WattMW - Mid Watt
SS - Super SaverHO - High Output
VHO - Very High Output
Drive Current
FOOTNOTES:1- 347V only available in HO drive current.
LED CANOPY LIGHT - LEGACYTM UNIVERSAL SUPERKIT - 2X2 (CRUK UNV)
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
HO - High Output
VHO - Very High Output
LIGHT OUTPUT - CRUK UNV
Cool
Whi
te
8,438
11,656
13,638
17,001
20,997
76
103
129
149
192
111
113
106
114
109
20 3/4” (528 mm)
20 3/4” (528 mm)
13/16”(21 mm)
DIMENSIONS
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
14
CA
NO
PY
Crossover SuperKits allow you replace many existing 2x2 canopy fixtures (including LSI, Whiteway and Jet-Phillips) without having to know the dimensions of the existing fixture .
SMARTEC ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS) .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a dropped, boroscilicate, prismatic glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a dropped glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - Pre-assembled optical unit and mounting panel hinges and fastens to existing fixture housing in place of current door assembly . Driver is pre-mounted to back of CRUK assembly .
SHIPPING WEIGHT - 33 pounds .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
LED CANOPY LIGHT SCOTTSDALE® - LEGACYTM
UNIVERSAL SUPERKIT - 2X2 (CRUK UNV SCDL)US & Int’l. patents pending.
2x2 Housing Not Included
2x2 Housing Must be Ordered Separately, if Needed
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
15
CA
NO
PY
LED CANOPY LIGHT SCOTTSDALE® - LEGACYTM
UNIVERSAL SUPERKIT - 2X2 (CRUK UNV SCDL)
Prefix OptionsColor Temperature
CRUK UNV(Universal 2x2)
SCDL - ScottsdaleDrop Lens
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347 Volt1
None
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRUK UNV SCDL LED SS CW UE WHT
LW - Low WattMW - Mid Watt
SS - Super Saver
Drive Current
FOOTNOTES:1- 347V only available in HO drive current.
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
LIGHT OUTPUT - CRUK UNV SCDL
Cool
Whi
te 7,634
10,517
12,538
76
103
129
100
102
97
DIMENSIONS
13/16(21 mm)
5 5/8(143 mm)
20 3/4 (528 mm)
20 3/4” (528 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
16
CA
NO
PY
Crossover SuperKits allow you replace many existing recessed canopy fixtures (including LSI, Whiteway and Jet-Phillips) without having to know the dimensions of the existing fixture .
SMARTEC ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS), High Output (HO), or Very High Output (VHO) .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces .
PTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a standard flat glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - Tether holds pre-assembled optical unit and mounting panel hinges during wiring for one-man installation . Driver is pre-mounted to back of CRUK assembly .
SHIPPING WEIGHT - 24 pounds .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
LED CANOPY LIGHT - LEGACYTM RECESSED SUPERKIT – (CRUK RECU)US & Int’l. patents pending.Recessed Housing Not Included
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
17
CA
NO
PY
Prefix OptionsColor Temperature
CRUK RECU(Recessed)
SC - Standard Symmetric
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347V1
None
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRUK RECU SC LED SS CW UE WHT
LW - Low WattMW - Mid Watt
SS - Super SaverHO - High Output
VHO - Very High Output
Drive Current
FOOTNOTES:1- 347V only available in HO drive current.
LED CANOPY LIGHT - LEGACYTM RECESSED SUPERKIT – (CRUK RECU)
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
HO - High Output
VHO - Very High Output
LIGHT OUTPUT - CRUK RECU
Cool
Whi
te
8,438
11,656
13,638
17,001
20,997
76
103
129
149
192
111
113
106
114
109
DIMENSIONS
1/2”(13 mm)
1 1/4”(31 mm)
21”(533 mm)
25 1/4” (641 mm)
21” (533 mm)
20 3/4” (528 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
18
CA
NO
PY
Crossover SuperKits allow you replace many existing recessed canopy fixtures (including LSI, Whiteway and Jet-Phillips) without having to know the dimensions of the existing fixture .
SMARTEC ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS) .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a dropped, boroscilicate, prismatic glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a dropped glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - Tether holds pre-assembled optical unit and mounting panel hinges during wiring for one-man installation . Driver is pre-mounted to back of CRUK assembly .
SHIPPING WEIGHT - 24 pounds .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
LED CANOPY LIGHT SCOTTSDALE® - LEGACYTM
RECESSED SUPERKIT – (CRUK RECU SCDL)US & Int’l. patents pending.Recessed Housing Not Included
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
19
CA
NO
PY
LED CANOPY LIGHT SCOTTSDALE® - LEGACYTM
RECESSED SUPERKIT – (CRUK RECU SCDL)
Prefix OptionsColor Temperature
CRUK RECU(Recessed)
SCDL - ScottsdaleDrop Lens
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347V1
None
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRUK RECU SCDL LED SS CW UE WHT
LW - Low WattMW - Mid Watt
SS - Super Saver
Drive Current
FOOTNOTES:1- 347V only available in HO drive current.
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
LIGHT OUTPUT - CRUK RECU SCDL
Cool
Whi
te
7,634
10,517
12,538
76
103
129
100
102
97
DIMENSIONS
1/2(13 mm)
1 1/4(31 mm)
6 1/16(153 mm)
20 3/4 (528 mm) 20 3/4 (528 mm)
21(533 mm)
25 1/4 (641 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
20
CA
NO
PY
SMARTTEC™ ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS), High Output (HO), or Very High Output (VHO) .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a clear tempered glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a standard flat glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
HAZARDOUS LOCATION - Designed for lighter than air fuel applications . Product is suitable for Domestic Class 1 Division 2, only when properly installed per LSI installation instructions .
DRIVER - State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
DRIVER HOUSING - Die cast aluminum, wet location rated driver/electrical enclosure is elevated above canopy deck to prevent water entry, provide easy “knock-out” connection of primary wiring and contributes to attaining the lowest operating temperatures available . Seals to optical housing via one-piece molded silicone gasket .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - One person installation . No additional sealant required . Installs in a 12” or 16” deck pan . Deck penetration consists of a 15” square hole . Fixture is secured via 4 fasteners directly through frame and deck into structure members/beams .
Accessory Mounting Options:
CRU FKL Kit - Deck penetration consists of a 23 1/4” square hole . Fixture is secured to deck via 4 fasteners directly through frame into structure members/ beams, or via suspension cables supplied by others .
CRU UDD Kit - Deck penetration consists of a 13” square hole . Mounting plate is secured to deck via 6 fasteners through deck or threaded rods into structure members/beams . Fixture is secured to mounting plate via 2 bracket legs and 4
screws .
SHIPPING WEIGHT - 25 pounds .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL and ETL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for damp locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com .
LED CANOPY LIGHT - LEGACYTM DOUBLE DECK (CRU - DDM)US & Int’l. patents pending.
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
IP67
damp location
damp location
Class 1, Division 2 – Standard on HO, SS, MW & LW only
T5 Temperature Classification – The surface temperature of this product will not rise above 100°C ., within a 40°C ambient .
Gas Groups A,B,C, and D – Group A: Acetylene / Group B: Hydrogen / Group C: Propane and Ethylene / Group D: Benzene, Butane, Methane & Propane .
For Use on Water-tight Plenum Canopies
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
21
CA
NO
PY
Prefix Color Temperature
CRU DDM SC - Standard Symmetric
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347V1
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRU DDM SC LED SS CW UE WHT
LW - Low WattMW - Mid WattageSS - Super SaverHO - High Output
VHO - Very High Output
Drive Current
FOOTNOTES:1- 347V only available in HO drive current.
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number
CRU-FKL Flange Mounting Kit 537530WHTCRU-UDD Universal Mounting Kit 532951WHT
LED CANOPY LIGHT - LEGACYTM DOUBLE DECK (CRU - DDM)
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
HO - High Output
VHO - Very High Output
LIGHT OUTPUT - CRU DDM
Cool
Whi
te
8,438
11,656
13,638
17,001
20,997
76
103
129
149
192
111
113
106
114
109
DIMENSIONS ACCESSORIES DIMENSIONS
CRU -FKL MOUNTING KIT(luminaire must be ordered seperately)
CRU -UDD MOUNTING KIT(luminaire must be ordered seperately)
20-3/4”(528 mm)
20-3/4” (528 mm)
20-3/4” (528 mm)3/4”(19 mm)
6-3/8”(162 mm)
10-13/16”(275 mm)
6-1/16” (155 mm)
2-15/16” (75 mm)
26 7/16”(672mm)
22-15/16”(583 mm)
26 7/16” (672 mm)
20-15/16” (532 mm)
1/4”(6mm)
2 1/16”(52mm)
23 3/16” (590 mm)
22-15/16” (583 mm)
1-1/8”(28 mm) 20-15/16” (532 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
22
CA
NO
PY
SMARTTEC™ ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS) .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a dropped borosilicate, prismatic glass lens to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a dropped glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
HAZARDOUS LOCATION - Designed for lighter than air fuel applications . Product is suitable for Domestic Class 1 Division 2, only when properly installed per LSI installation instructions .
DRIVER - State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
DRIVER HOUSING - Die cast aluminum, wet location rated driver/electrical enclosure is elevated above canopy deck to prevent water entry, provide easy “knock-out” connection of primary wiring and contributes to attaining the lowest operating temperatures available . Seals to optical housing via one-piece molded silicone gasket .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - One person installation . No additional sealant required . Installs in a 12” or 16” deck pan . Deck penetration consists of a 15” square hole . Fixture is secured via 4 fasteners directly through frame and deck into structure members/beams .
Accessory Mounting Options:
CRU FKL Kit - Deck penetration consists of a 23 1/4” square hole . Fixture is secured to deck via 4 fasteners directly through frame into structure members/ beams, or via suspension cables supplied by others .
CRU UDD Kit - Deck penetration consists of a 13” square hole . Mounting plate is secured to deck via 6 fasteners through deck or threaded rods into structure members/beams . Fixture is secured to mounting plate via 2 bracket legs and 4
screws .
SHIPPING WEIGHT - 25 pounds .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL and ETL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for damp locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
LED CANOPY LIGHT - SCOTTSDALE® LEGACYTM
DOUBLE DECK (CRU - DDM)US & Int’l. patents pending.
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
IP67
damp location
damp location
Class 1, Division 2 – Standard on SS, MW & LW only
T5 Temperature Classification – The surface temperature of this product will not rise above 100°C ., within a 40°C ambient .
Gas Groups A,B,C, and D – Group A: Acetylene / Group B: Hydrogen / Group C: Propane and Ethylene / Group D: Benzene, Butane, Methane & Propane .
For Use on Water-tight Plenum Canopies
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
23
CA
NO
PY
LED CANOPY LIGHT - SCOTTSDALE® LEGACYTM
DOUBLE DECK (CRU - DDM)
Prefix Color Temperature
CRU DDM SCDL - Scottsdale Drop Lens
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347V1
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRU DDM SCDL LED SS CW UE WHT
LW - Low WattMW - Mid WattageSS - Super Saver
Drive Current
FOOTNOTES:1- 347V only available in HO drive current.
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number
CRU-FKL Flange Mounting Kit 537530WHTCRU-UDD Universal Mounting Kit 532951WHT
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
LIGHT OUTPUT - CRU UDD SCDL
Cool
Whi
te
8,438
11,656
13,638
76
103
129
111
113
106
DIMENSIONS ACCESSORIES DIMENSIONS
CRU -FKL MOUNTING KIT(luminaire must be ordered seperately)
CRU -UDD MOUNTING KIT(luminaire must be ordered seperately)
20-3/4”(528 mm)
20-3/4” (528 mm)
20-3/4” (528 mm)
3/4”(19 mm)
5-9/16”(141 mm)
6-3/8”(162 mm)
10-13/16”(275 mm)
6-1/16” (155 mm)
2-15/16” (75 mm)
26 7/16”(672mm)
26 7/16” (672 mm)
1/4”(6mm)
2 1/16”(52mm)
23 3/16” (590 mm)
22-15/16” (583 mm)
1-1/8”(28 mm) 20-15/16” (532 mm)
22-15/16”(583 mm)
20-15/16” (532 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
24
CA
NO
PY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
IP67
GENERATION 3 LED FOCUS CANOPY LIGHT (CRO3)
LEDS - Select high-brightness LEDs . 5300°K color temperature, 70 CRI (nominal) .
OPTICS / DISTRIBUTIONS – Ultra-High efficiency optics provide precise beam placement for optimal retail surface illumination . Each bank of LEDs in a light cartridge is independently adjustable between +/- 45º allowing targeted zone illumination . Regardless of light cartridge position luminaire provides cutoff .
OPTICAL UNIT – Featuring a slim 2" profile luminaire . Housing is die-formed aluminum with independently adjustable extruded aluminum light cartridges . Each light cartridge is provided with a gasketed clear tempered glass lens providing a water-resistant seal .
DRIVER – State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Input power is 50 watts . Components are fully encased in potting for moisture resistance . Driver complies with IEC and FCC standards .
DRIVER HOUSING – Weather-tight aluminum driver/electrical enclosure is elevated above canopy deck to ensure no water entry and providing “knock-out” entry for primary wiring .
FINISH – Standard color is white . Fixture is finished with LSI's DuraGrip® polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
OPERATING TEMPERATURE – -40°C to +50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply 120-277V VAC, (50/60 Hz) input . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C
INSTALLATION - Installs in a 12” or 16” deck pan . Deck penetration consists of 5 drilled holes simplifying installation and water sealing . Unit is designed to retrofit into existing Scottsdale®
(4”) hole as well as openings for Encore® and Encore® Top Access and to reconnect wiring from the SC/ECTA without having to relocate conduit . Retrofit panels are available for existing Scottsdales and Encores (see back page) as well as kits for recessed and 2x2 installations (see separate spec sheets) .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty
LISTING - ETL listed to UL1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
PHOTOMETRICS – Application layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
US patents D590100 & D574995 & 7828456 and US & Int’l. patents pending
LIGHT OUTPUT - CRO3
Distribution Lumens (Nominal)
Type FO 1000 (for each of 3 banks - total 3000)
Input Power of 40 watts
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
25
CA
NO
PY
GENERATION 3 LED FOCUS CANOPY LIGHT (CRO3)
TYPICAL ORDER EXAMPLE:
Prefix Distribution Light Source Drive Currnet Finish
LUMINAIRE ORDERING INFORMATION
# ofLEDs
InputVoltage
UE - Universal Voltage(120-277V AC)
WHT - WhiteCW - Cool White (5000° K nom)LED 30 350 - 350 mAFO – FocusCRO3
CRO3 FO LED 30 350 CW UE WHT
ColorTemperature
ACCESSORY ORDERING INFORMATIONDescription Order Number
(Accessories are field installed)
Retrofit Panel - SC to CRO3, for 16" Deck Panel 430951Retrofit Panel - EC / ECTA / SCF to CRO3, for 16" Deck Panel 430765Retrofit Panel - SC to CRO3, for 12" Deck Panel 430797Retrofit Panel - ECTA / SCF to CRO3, for 12" Deck Panel 430759Retrofit 2x2 Cover Panel (w/ centered hole pattern for CRO3) 430966
Description Order NumberRetrofit 2x2 Cover Panel Blank (no holes) 357282Retrofit RIC Cover Panel Blank (no holes) 354702Kit - Hole Plugs and Silicone (enough for 25 retrofits)1 13205401 Consists of (25) 7/8" hole plugs and (1) 10.3 oz tube of RTV
Superkits® are available to retrofit CRO3 Ambient and Focus fixtures into a wide variety of existing 2x2 and recessed housings. See separate spec sheets.
SHIPPING WEIGHTS12.2 lbs. 1 fixture53.3 lbs. 4 fixtures
10 1/16'(255 mm) 3'
(76 mm)6 5/16'
(160 mm)
14 1/2'(368 mm)
17 1/2'(444 mm)
9 13/16'(249 mm)
7 1/2'(191 mm)
2 1/4"(58 mm)
17 1/2"(445 mm)
14 1/2"(368 mm)
DIMENSIONS
18 3/4” (476 mm)
9”(229 mm)
TOP PAN
1-3/16”(31 mm)
1 7/8”(48 mm)
CANOPY
14” (356 mm)TOP PAN
1-3/16”(31 mm)
2”(51 mm)
CANOPY
14” (356 mm)TOP PAN
TOP PAN BOTTOM PAN
PANEL W/O HOLES
26” sq(660 mm)
16” RETROFIT PANEL - SC (#430951)
2X2 COVER PANEL W/ HOLES (430966) 2X2 COVER PANEL BLANK (357282) RIC COVER PANEL (354702)
16” RETROFIT PANELS - EC/ECTA/SCF (#430765)
PANEL W/ HOLES
26” sq(660 mm)
18 3/4” (476 mm)
9”(229 mm)
TOP PAN
1-3/16”(31 mm)
1 7/8”(48 mm)
CANOPY
14” (356 mm)TOP PAN
1-3/16”(31 mm)
2”(51 mm)
CANOPY
14” (356 mm)TOP PAN
TOP PAN BOTTOM PAN
PANEL W/O HOLES
26” sq(660 mm)
16” DECK RETROFIT PANEL - SC (#430951)
2X2 COVER PANEL BLANK (357282) RIC COVER PANEL (354702)
CFKS 64/84 FLANGE KIT (501533) CFKL 128 FLANGE KIT (501647)
16” DECK RETROFIT PANELS - EC/ECTA/SCF (#430765)
20.70 (526 mm)2.86(73 mm)
0.14(4 mm)
22.82 (580 mm)0.14
(4 mm)
2.86(73 mm)
23.00 (584 mm)
25.12 (638 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
26
CA
NO
PY
SMARTEC ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - One-piece, die-formed, aluminumm housing with powder coated finish . One conduit knockout and four mounting holes .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS), High Output (HO), or Very High Output (VHO) .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a glass lens to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a standard flat glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - Pre-assembled optical unit and mounting panel attaches to fixture housing via 4 fasteners . Driver is pre-mounted to back of optical assembly .
SHIPPING WEIGHT - 35 pounds .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
LED SURFACE MOUNT - LEGACY™ (CRU SM)US & Int’l. patents pending.
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
IP67wet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
27
CA
NO
PY
Prefix OptionsColor Temperature
CRU SM(Surface Mount)
SC - Standard Symmetric
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347 Volt1
None
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRU SM SC LED SS CW UE WHT
LW - Low WattMW - Mid Watt
SS - Super SaverHO - High Output
VHO - Very High Output
Drive Current
FOOTNOTES:1- 347V only available in HO drive current.
ACCESSORY ORDERING INFORMATIONDescription Order NumberSSA Slope Surface Adaptor 52152 CLR10’ Toggle Cable Hanger TCH10
LED SURFACE MOUNT - LEGACY™ (CRU SM)
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
HO - High Output
VHO - Very High Output
LIGHT OUTPUT - CRUK SM
Cool
Whi
te
8,438
11,656
13,638
17,001
20,997
76
103
129
149
192
111
113
106
114
109
DIMENSIONS22 15/16”(583 mm)
22 15/16”(583 mm)
4 1/2”(114 mm)
3/8”(9 mm)
SLOPE SURFACE ADAPTOR – SSA ACCESSORY TOGGLE CABLE HANGER
4-12 Slope 18 1/2°
3-12 Slope14°
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
28
CA
NO
PY
SMARTEC ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - One-piece, die-formed, aluminumm housing with powder coated finish . One conduit knockout and four mounting holes .
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS .
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a dropped, boroscilicate, prismatic glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a dropped glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV .
ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish .
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - Pre-assembled optical unit and mounting panel attaches to fixture housing via 4 fasteners . Driver is pre-mounted to back of optical assembly .
SHIPPING WEIGHT - 35 pounds .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
PHOTOMETRICS - Applications layouts are available upon request . Contact LSI Petroleum Lighting or petroleum .apps@lsi-industries .com
LED SURFACE MOUNT SCOTTSDALE® - LEGACYTM (CRU SM SCDL)US & Int’l. patents pending.
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
29
CA
NO
PY
Prefix OptionsColor Temperature
CRU SM(Surface Mount)
SCDL - ScottsdaleDrop Lens
LED CW - Cool White
Input Voltage
UE - Universal Voltage
(120-277V)
347-347 Volt1
None
Finish
WHT - WhiteBRZ - BronzeBLK - Black
Light SourceDistribution
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
CRU SM SCDL LED SS CW UE WHT
LW - Low WattMW - Mid Watt
SS - Super Saver
Drive Current
FOOTNOTES:1- 347V only available in HO drive current.
ACCESSORY ORDERING INFORMATIONDescription Order NumberSSA Slope Surface Adaptor 52152 CLR10’ Toggle Cable Hanger TCH10
LED SURFACE MOUNT SCOTTSDALE® - LEGACYTM (CRU SM SCDL)
Lumens Watts LPW
LW - Low Watt
MW - Mid Watt
SS - Super Saver
LIGHT OUTPUT - CRU SM SCDL
Cool
Whi
te
7,634
10,517
12,538
76
103
129
100
102
97
DIMENSIONS
4 1/2(114 mm)
5 1/8(131 mm)
22 15/16(583 mm)
22 15/16 (583 mm)
SLOPE SURFACE ADAPTOR – SSA ACCESSORY TOGGLE CABLE HANGER
4-12 Slope 18 1/2°
3-12 Slope14°
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
30
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5000°K nominal) or Neutral White (4000°K nominal) color temperature . 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Type S (Standard Symmetric) . Exceptional uniformity creates bright environment at lower light levels .
HOUSING - One-piece, die-formed aluminum . Weather-tight housing contains factory prewired driver and field connections . Extruded one-piece EPDM gasketed wiring access door (with safety lanyard) is located underneath and utilizes tool-less thumbscrew fastener .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum optics housing creates an IP67 rated, sealed optical unit (includes pressure-stabilizing breather) . Optical unit is recessed into housing cavity and sealed to the housing with extruded one-piece EPDM gasket . Optical unit lanyard serves dual purposes of safety and provides positive ground between unit and housing .
MOUNTING - Tapered rear design allows fixtures to be mounted in a quad pattern without the need for extension arms . Use with 3” reduced drilling pattern on round and square poles . A round pole plate (X4RPP, X5RPP) is required for mounting to round poles . Wall mount available by ordering wall mounting bracket (BKS-XBO-WM-*-CLR) . See Accessory Ordering Information chart for all brackets .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), and 347-480 VAC . Optional twistlock photocell receptacle is available . Photocell must be ordered separately . Fixture Watts: LW -78, SS - 130 nominal .
DRIVER - Available in LW (Low Wattage) and SS (Super Saver) drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards . Driver and key electronic components can easily be accessed .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 31 lbs . / 14 .1 Kg (fixture only) . Add mast arm weight for total shipping weight .
LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED AREA LIGHTS - (PASU)US patent 7828456, 7952293, 8002428 and CAN 2693131 & 2701653 and US & Int'l. patents pending
Type S
LWSSLWSS
LIGHT OUTPUT - PASULumens (Nominal)
CoolWhite
780012950735011800
NeutralWhite
Fixtures comply with ANSI C136 .31-2010 American National Standard for Roadway Lighting Equipment - Luminaire Vibration 3G requirements .
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant
IP65IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
31
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
PASU S LED SS CW UE WHT PCRPrefix FinishColor
Temperature
PASU LED CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480 - UniversalVoltage
(347-480V)
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
OptionsLightSource
Distribution
LW -Low WattageSS - Super Saver
DriveCurrent
PCR - Photoelectric Control Receptacle1
TB - Terminal BlockS - Standard Symmetrical
DIMENSIONS
Front View Side View
Bottom View
6-7/16"(164 mm)
26-1/2"(674 mm)
18-3/8"(466 mm)
18-3/8"(466 mm)
3-1/4"(82 mm)
7-7/8"(200 mm)
House Side Shield
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
LUMINAIRE EPA CHART - PASUSingle
D180°
D90°
T90°
TN120°
Q90°
0.9
2.0
1.6
2.7
2.8
3.1
FOOTNOTES:1- Photocell must be ordered separately. See Accessories.2 - House Side Shield adds to fixture EPA. Consult factory. 3 - Factory installed PCR option required.
4 - Fusing must be located in the hand hole of pole.
BKA-XBO-EC-6-CLR 6" Extension Arm 382136CLRBKS-XBO-WM-*-CLR Wall Mounting Bracket 382132CLRPASU-HSS House Side Shield (Black only) 544103BLK2
X4RPP Round Pole Plate for 4" Poles 379967CLRX5RPP Round Pole Plate for 5" Poles 379968CLRPC120 Photocell for use with PCR option (120V) 1225143
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 1225153
PC347 Photocell for use with PCR option (347V) 1595163
PC480 Photocell for use with PCR option (480V) 12251803
FK120 Single Fusing (120V) FK1204
FK277 Single Fusing (277V) FK2774
DFK208, 240 Double Fusing (208V, 240V) DFK208, 2404
DFK480 Double Fusing (480V) DFK4804
FK347 Single Fusing (347V) FK3474
Note: House Side Shield adds to fixture EPA. Consult Factory.
LED AREA LIGHTS - (PASU)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
32
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5000°K nominal) or Neutral White (4000°K nominal) color temperature . 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Type S (Standard Symmetric) . Exceptional uniformity creates bright environment at lower light levels .
HOUSING - One-piece, die-formed aluminum . Weather-tight housing contains factory prewired driver and field connections . Extruded one-piece EPDM gasketed wiring access door (with safety lanyard) is located underneath and utilizes tool-less thumbscrew fastener .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum optics housing creates an IP67 rated, sealed optical unit (includes pressure-stabilizing breather) . Optical unit is recessed into housing cavity and sealed to the housing with extruded one-piece EPDM gasket . Optical unit lanyard serves dual purposes of safety and provides positive ground between unit and housing .
MOUNTING - Tapered rear design allows fixtures to be mounted to mast arms from 1-1/4” (1 .66” O .D .) to 2” (2 .375” O .D .) pipe using internal clamping bracket . Integral leveling device allowing +/- 5o vertical adjustment of the fixture, and leveling bubble accommodate variances in mast arm construction . Molded silicone barrier surrounds mast arm to restrict intrusion of insects and birds . If existing mast arm is larger than 2” (2 .375” O .D .) pipe, tenon reducers are available . Consult factory . LSI mast arms can be ordered separately . Fixture can be rotated with an up-tilt to 90o using cast aluminum adjustable bracket . Adjustable brackets available for mounting on 2” (2 .375” O .D .) pipe tenon or bolt-on mount with 5” traditional drilling pattern . See Accessory Ordering Information chart .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), and 347-480 VAC . Optional twistlock photocell receptacle is available . Photocell must be ordered separately . Fixture Watts: LW -78, SS - 130 nominal .
DRIVER - Available in LW (Low Wattage) and SS (Super Saver) drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards . Driver and key electronic components can easily be accessed .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 33 lbs . / 15 Kg (fixture only) . Add mast arm weight for total shipping weight .
LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED ROADWAY LIGHTS - (PRSU)US patent 7828456, 7952293, 8002428 and CAN 2693131 & 2701653 and US & Int'l. patents pending
Type S
LWSSLWSS
LIGHT OUTPUT - PRSULumens (Nominal)
CoolWhite
780012950735011800
NeutralWhite
Fixtures comply with ANSI C136 .31-2010 American National Standard for Roadway Lighting Equipment - Luminaire Vibration 3G requirements .
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
33
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
PRSU S LED SS CW UE WHT PCR
LUMINAIRE EPA CHART - PRSUSingle
D180°
0.9
2.0
Note: House Side Shield adds to fixture EPA. Consult Factory.
BracketDesignation
BracketType
BracketLength
BracketConfiguration
BracketFinish Catalog Number EPA Value Shipping Wt (kg/lbs)
EPAs and Shipping Weights
BKA PTB MAST ARM 4 - 4 Foot6 - 6 Foot8 - 8 Foot
BKA PTB MAST ARM 4 S BKA PTB MAST ARM 4 D180 BKA PTB MAST ARM 6 S BKA PTB MAST ARM 6 D180 BKA PTB MAST ARM 8 S BKA PTB MAST ARM 8 D180
1.93.62.34.53.26.2
4.1/96.8/155.4/129.5/217.3/16
13.2/29
S - SingleD180 - Double
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metalic Silver
PLP - Platinum PlusSVG - Satin Verde GreenWHT - WhiteRAW - Raw Aluminum
with Satin Finish
TYPICAL ORDER EXAMPLE:
TENON MOUNT MAST ARM ORDERING INFORMATION
BKA PTB MAST ARM 4 S BLK
LSI MAST ARM: Available in 4’, 6’ and 8’ nominal arm lengths with single (S) and double arms at 180º (D180) mounting configurations. All arms have a 32” rise. Hub mounts to 2” (2.375” O.D.) pipe size x 4-3/4” tall tenon. For use with Tenon Mount (N) poles (See separate data sheets).
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
FOOTNOTES:1- Photocell must be ordered separately. See Accessories.2 - House Side Shield adds to fixture EPA. Consult factory.
3- Factory installed PCR option required. 4 - Fusing must be located in the hand hole of pole.
BKA-NM-PRSU-ADJ-CLR 2” (2-3/8” O.D.) pipe tenon mount adjustable bracket kit 527793CLRBKA-BO-PRSU-ADJ-CLR Bolt-on mount adjustable bracket kit (order poles with 5” traditional drilling pattern) 530070CLRPRSU HSS House Side Shield (Black only) 544103BLK2
PC120 Photocell for use with PCR option (120V) 1225143
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 1225153
PC347 Photocell for use with PCR option (347V) 1595163
PC480 Photocell for use with PCR option (480V) 12251803
FK120 Single Fusing (120V) FK1204
FK277 Single Fusing (277V) FK2774DFK208, 240 Double Fusing (208V, 240V) DFK208, 2404
DFK480 Double Fusing (480V) DFK4804
FK347 Single Fusing (347V) FK3474
Prefix FinishColorTemperature
PRSU LED CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480 - UniversalVoltage
(347-480V)
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
OptionsLightSource
Distribution
LW -Low WattageSS - Super Saver
DriveCurrent
PCR - Photoelectric Control Receptacle1
TB - Terminal BlockS - Standard Symmetrical
DIMENSIONS
Front View Side View
Bottom View
6-7/16"(164 mm)
26-1/2"(674 mm)
3-1/4"(82 mm)
7-7/8"(200 mm)
House Side Shield
18-3/8"(466 mm)
18-3/8"(466 mm)
Tenon Mount Mast Arm
Adjustable Brackets
Tenon Mount (527793CLR)Bolt-on (530070CLR)
10”(254 mm) 32”
(813 mm)
10”(254 mm)
4’, 6’, 8’ Nominal 8’,12’, 16’ Nominal
Single D 180
10-5/16"(262 mm)
13-11/16"(348 mm)
8-15/16"(227 mm)
10-1/16"(256mm)
LED ROADWAY LIGHTS (PRSU)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
34
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in both optical unit and driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
ENERGY SAVING CONTROL OPTIONS – DIM – 0-10 volt dimming enabled with controls by others . BLS – Bi-level switching responds to a 120-277V signal from separate controller or sensor (by others), with low light level decreased to 30% maximum drive current .
OCCUPANCY SENSOR (IMS) - Optional internal passive infrared motion sensor activates switching of luminaire light levels . High level light is activated and increased to full bright in 1-2 seconds upon detection of motion . Low light level (30% maximum drive current) is activated when target zone is absent of motion activity for ~ 2 minutes and ramps down (10-15 sec .) to low level to allow eyes time to adjust . Sensor is located on the front of optical assembly . Sensor optic has a detection cone of approximately 45o . Examples of detection - occurs 30’ out from a 30’ mounting height pole; occurs 20’ out from a 20’ mounting height pole .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5000°K nominal) or Neutral White (4000°K nominal) color temperature . 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types FT and 5 . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - One-piece, die-formed aluminum . Weather-tight housing contains factory prewired driver and field connections . Extruded one-piece EPDM gasketed wiring access door (with safety lanyard) is located underneath and utilizes tool-less thumbscrew fastener .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum optics housing creates an IP67 rated, sealed optical unit (includes pressure-stabilizing breather) . Optical unit is recessed into housing cavity and sealed to the housing with extruded one-piece EPDM gasket . Optical unit lanyard serves dual purposes of safety and provides positive ground between unit and housing .
MOUNTING - Tapered rear design allows fixtures to be mounted in a quad pattern without the need for extension arms . Use with 3” reduced drilling pattern on round and square poles . A round pole plate (X4RPP, X5RPP) is required for mounting to round poles . Wall mount available by ordering wall mounting bracket (BKS-XBO-WM-*-CLR) . See Accessory Ordering Information chart for all brackets .
ELECTRICAL - A terminal block for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), and 347-480 VAC . Optional twistlock photocell receptacle is available . Photocell must be ordered separately . Fixture Watts: SS - 69, HO - 89 nominal .
DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards . Driver and key electronic components can easily be accessed .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 31 lbs . / 14 .1 Kg
LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED AREA LIGHTS - AEROMAXTM SMALL (XASU)US patent 7828456, 7952293, 8002428 and CAN 2693131 & 2701653 and US & Int'l. patents pending
DARK-SKY FRIENDLY
Type FT Type 5 SS
HOSSHO
LIGHT OUTPUT - XASULumens (Nominal)# of LEDS
Cool
Whi
te 6200765057006700
6100750056006700
64646464Ne
utra
lW
hite
Fixtures comply with ANSI C136 .31-2010 American National Standard for Roadway Lighting Equipment - Luminaire Vibration 3G requirements .
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant enabled
enabled
IP65IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
35
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XASU FT LED 64 HO CW UE WHT PCR
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
LUMINAIRE EPA CHART - XASUSingle
D180°
D90°
T90°
TN120°
Q90°
0.9
2.0
1.6
2.7
2.8
3.1
FOOTNOTES:1- IMS, DIM and BLS cannot be ordered together.2 - Do not specify for satellite units.3- Not compatible with Virtinet wireless systems, DIM or BLS.4- Photocell must be ordered separately. See Accessories.5 - House Side Shield adds to fixture EPA. Consult factory.
6 - Factory installed PCR option required. 7 - Fusing must be located in the hand hole of pole.8 - Includes VCM. To be used in conjunction with VCM option in fixture. Consult factory.9 - To be used in conjunction with any of the VCM control modules and ES sensor option in fixture. Consult factory.
BKA-XBO-EC-6-CLR 6" Extension Arm 382136CLRBKS-XBO-WM-*-CLR Wall Mounting Bracket 382132CLRXASU-FT-HSS House Side Shield (Black only) 544103BLK5
X4RPP Round Pole Plate for 4" Poles 379967CLRX5RPP Round Pole Plate for 5" Poles 379968CLRPC120 Photocell for use with PCR option (120V) 1225146
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 1225156
PC347 Photocell for use with PCR option (347V) 1595166
PC480 Photocell for use with PCR option (480V) 12251806
FK120 Single Fusing (120V) FK1207
FK277 Single Fusing (277V) FK2777
DFK208, 240 Double Fusing (208V, 240V) DFK208, 2407
DFK480 Double Fusing (480V) DFK4807
FK347 Single Fusing (347V) FK3477
ROSB120 - WL Remote Box with 120V Occupancy Sensor C/F8
ROSB277 - WL Remote Box with 277V Occupancy Sensor C/F8
RPSB120 - Wet Location Remote Box with 120V External Photocell C/F8
RPSB208-277 - Wet Location Remote Box with 208-277V External Photocell C/F8
PMOS120 - 120V Pole-Mount Occupancy Sensor 518030CLR9
PMOS208/240 - 208V, 240V Pole-Mount Occupancy Sensor C/F9
PMOS277 - 277V Pole-Mount Occupancy Sensor 518029CLR9
Note: House Side Shield adds to fixture EPA. Consult Factory.
Prefix FinishColorTemperature
XASU LED 64 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480 - UniversalVoltage
(347-480V)
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Optional Sensor/Options
Optional ControlsLightSource
Distribution # ofLEDs
SS - Super SaverHO -High Ouput
DriveCurrent
SensorES - External Sensor2
IMS - Integral Motion Sensor3
OptionsPCR - Photoelectric Control Receptacle4
5 - Type VFT - Forward Throw
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM - 0-10V Dimming (from external signal)1
BLS - Bi-level Switching (from external 120-277V signal)1
LED AREA LIGHTS - AEROMAXTM SMALL (XASU)
DIMENSIONS
Front View Side View
Bottom View
6-3/8"(161 mm)
18-3/8"(466 mm)
18-3/8"(466 mm)
26-1/2"(674 mm)
3-1/4"(82 mm)
7-7/8"(200 mm)
House Side Shield
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
36
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in both optical unit and driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
ENERGY SAVING CONTROL OPTIONS – DIM – 0-10 volt dimming enabled with controls by others . BLS – Bi-level switching responds to a 120-277V signal from separate controller or sensor (by others), with low light level decreased to 30% maximum drive current .
OCCUPANCY SENSOR (IMS) - Optional internal passive infrared motion sensor activates switching of luminaire light levels . High level light is activated and increased to full bright in 1-2 seconds upon detection of motion . Low light level (30% maximum drive current) is activated when target zone is absent of motion activity for ~ 2 minutes and ramps down (10-15 sec .) to low level to allow eyes time to adjust . Sensor is located on the front of optical assembly . Sensor optic has a detection cone of approximately 45o . Examples of detection - occurs 30’ out from a 30’ mounting height pole .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5000°K nominal) or Neutral White (4000°K nominal) color temperature . 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types FT and 5 . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - One-piece, die-formed aluminum . Weather-tight housing contains factory prewired driver and field connections . Extruded one-piece EPDM gasketed wiring access door (with safety lanyard) is located underneath and utilizes tool-less thumbscrew fastener .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum optics housing creates an IP67 rated, sealed optical unit (includes pressure-stabilizing breather) . Optical unit is recessed into housing cavity and sealed to the housing with extruded one-piece EPDM gasket . Optical unit lanyard serves dual purposes of safety and provides positive ground between unit and housing .
MOUNTING - Tapered rear design allows fixtures to be mounted to mast arms from 1-1/4” (1 .66” O .D .) to 2” (2 .375” O .D .) pipe using internal clamping bracket . Integral leveling device allowing +/- 5o vertical adjustment of the fixture and leveling bubble accommodate variances in mast arm construction . Molded silicone barrier surrounds mast arm to restrict intrusion of insects and birds . If existing mast arm is larger than 2” (2 .375” O .D .) pipe, tenon reducers are available . Consult factory . LSI mast arms can be ordered separately . Fixture can be rotated with an up-tilt to 90o using cast aluminum adjustable bracket . Adjustable brackets available for mounting on 2” (2 .375” O .D .) pipe tenon or bolt-on mount with 5” traditional drilling pattern . See Accessory Ordering Information chart .
ELECTRICAL - A terminal block for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), and 347-480 VAC . Optional twistlock photocell receptacle is available . Photocell must be ordered separately . Fixture Watts: SS - 69, HO - 89 nominal .
DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Easily accessible driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 33 lbs . / 15 Kg
LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED ROADWAY LIGHTS - SMALL (XRSU)US patent 7828456, 7952293, 8002428 and CAN 2693131 & 2701653 and US & Int'l. patents pending
DARK-SKY FRIENDLY
Type FT Type 5 SS
HOSSHO
LIGHT OUTPUT - XRSULumens (Nominal)# of LEDS
Cool
Whi
te 6200765057006700
6100750056006700
64646464Ne
utra
lW
hite
Fixtures comply with ANSI C136 .31-2010 American National Standard for Roadway Lighting Equipment - Luminaire Vibration 3G requirements .
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant enabled
enabled
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
37
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XRSU FT LED 64 HO CW UE WHT PCR
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order NumberLUMINAIRE EPA CHART - XRSU
Single
D180°
0.9
2.0
FOOTNOTES:1- IMS, DIM and BLS cannot be ordered together.2 - Do not specify for satellite units.3- Not compatible with Virtinet wireless systems, DIM or BLS.4- Photocell must be ordered separately. See Accessories.5 - House Side Shield adds to fixture EPA. Consult factory.
6 - Factory installed PCR option required. 7 - Fusing must be located in the hand hole of pole.8 - Includes VCM. To be used in conjunction with VCM option in fixture. Consult factory.9 - To be used in conjunction with any of the VCM control modules and ES sensor option in fixture. Consult factory.
BKA-NM-XRSU-ADJ-CLR 2” (2-3/8” O.D.) pipe tenon mount adjustable bracket kit 527793CLRBKA-BO-XRSU-ADJ-CLR Bolt-on mount adjustable bracket kit (order poles with 5” traditional drilling pattern) 530070CLRXRSU-FT-HSS House Side Shield (Black only) 544103BLK5
PC120 Photocell for use with PCR option (120V) 1225146
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 1225156
PC347 Photocell for use with PCR option (347V) 1595166
PC480 Photocell for use with PCR option (480V) 12251806
FK120 Single Fusing (120V) FK1207
FK277 Single Fusing (277V) FK2777
DFK208, 240 Double Fusing (208V, 240V) DFK208, 2407
DFK480 Double Fusing (480V) DFK4807
FK347 Single Fusing (347V) FK3477
ROSB120 - WL Remote Box with 120V Occupancy Sensor C/F8
ROSB277 - WL Remote Box with 277V Occupancy Sensor C/F8
RPSB120 - Wet Location Remote Box with 120V External Photocell C/F8
RPSB208-277 - Wet Location Remote Box with 208-277V External Photocell C/F8
PMOS120 - 120V Pole-Mount Occupancy Sensor 518030CLR9
PMOS208/240 - 208V, 240V Pole-Mount Occupancy Sensor C/F9
PMOS277 - 277V Pole-Mount Occupancy Sensor 518029CLR9
Note: House Side Shield adds tofixture EPA. Consult Factory.
Prefix FinishColorTemperature
XRSU LED 64 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480 - UniversalVoltage
(347-480V)
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Optional Sensor/Options
Optional ControlsLightSource
Distribution # ofLEDs
SS - Super SaverHO -High Ouput
DriveCurrent
SensorES - External Sensor2
IMS - Integral Motion Sensor3
OptionsPCR - Photoelectric Control Receptacle4
5 - Type VFT - Forward Throw
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM - 0-10V Dimming (from external signal)1
BLS - Bi-level Switching (from external 120-277V signal)1
LED ROADWAY LIGHTS - SMALL (XRSU)
DIMENSIONS
Front View Side View
Bottom View
6-3/8"(161 mm)
18-3/8"(466 mm)
18-3/8"(466 mm) 26-1/2"
(674 mm)
3-1/4"(82 mm)
7-7/8"(200 mm)
House Side Shield
BracketDesignation
BracketType
BracketLength
BracketConfiguration
BracketFinish Catalog Number EPA Value Shipping Wt (kg/lbs)
EPAs and Shipping Weights
BKA PTB MAST ARM 4 - 4 Foot6 - 6 Foot8 - 8 Foot
BKA PTB MAST ARM 4 S BKA PTB MAST ARM 4 D180 BKA PTB MAST ARM 6 S BKA PTB MAST ARM 6 D180 BKA PTB MAST ARM 8 S BKA PTB MAST ARM 8 D180
1.93.62.34.53.26.2
4.1/96.8/155.4/129.5/217.3/16
13.2/29
S - SingleD180 - Double
BLK - BlackBRZ - BronzeGPT - Graphite
MSV - Metalic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - WhiteRAW - Raw Aluminum
with Satin Finish
TYPICAL ORDER EXAMPLE:
TENON MOUNT MAST ARM ORDERING INFORMATION
BKA PTB MAST ARM 4 S BLK
Tenon Mount Mast Arm
10”(254 mm) 32”
(813 mm)
10”(254 mm)
4’, 6’, 8’ Nominal 8’,12’, 16’ Nominal
Single D 180Adjustable Brackets
Tenon Mount (527793CLR)Bolt-on (530070CLR)
10-5/16"(262 mm)
13-11/16"(348 mm)
8-15/16"(227 mm)
10-1/16"(256mm)
LSI MAST ARM: Available in 4’, 6’ and 8’ nominal arm lengths with single (S) and double arms at 180º (D180) mounting configurations. All arms have a 32” rise. Hub mounts to 2” (2.375” O.D.) pipe size x 4-3/4” tall tenon. For use with Tenon Mount (N) poles (See separate data sheets).
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
38
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in both optical unit and driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
ENERGY SAVING CONTROL OPTIONS – DIM – 0-10 volt dimming enabled with controls by others . BLS – Bi-level switching responds a 120-277V signal from separate controller or sensor (by others) . Low light level decreased to 30% maximum drive current .
OCCUPANCY SENSOR (IMS) - Optional internal passive infrared motion sensor activates switching of luminaire light levels . High level light activated and increased to full bright in 1-2 seconds upon detection of motion . Low light level (30% maximum drive current) activated when target zone is absent of motion activity for ~ 2 minutes and ramps down (10-15 sec .) to low level . Sensor located on the front of optical assembly . Sensor optic has a detection cone of approximately 45o . Examples of detection - occurs 30’ out from a 30’ mounting height pole .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5000°K nominal) or Neutral White (4000°K nominal) color temperature . 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types 3, FT and 5 . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - One-piece, die-formed aluminum, weather-tight housing contains factory prewired driver and field connections . Extruded one-piece EPDM gasketed wiring access door (with safety lanyard) located underneath and utilizes tool-less thumbscrew fastener .
OPTICAL UNIT - Clear tempered flat glass lens sealed to aluminum optics housing creates an IP67 rated, sealed optical unit (includes pressure-stabilizing breather) . Optical unit is recessed into housing cavity and sealed to the housing with extruded one-piece EPDM gasket . Optical unit lanyard serves dual purposes of safety and provides positive ground between unit and housing .
MOUNTING - Tapered rear design allows fixtures to be mounted in a quad pattern without the need for extension arms . Use with 3” reduced drilling pattern on round and square poles . A round pole plate (X4RPP, X5RPP) is required for mounting to round poles . Wall mount available by ordering wall mounting bracket (BKS-XBO-WM-*-CLR) . See Accessory Ordering Information chart for all brackets .
ELECTRICAL - A terminal block for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), and 347-480 VAC . Optional twistlock photocell receptacle is available . Photocell must be ordered separately . Fixture Watts: SS - 139, HO - 176 nominal .
DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards . Driver and key electronic components can easily be accessed .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 39 lbs . / 17 .7 Kg
LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED AREA LIGHTS - AEROMAXTM MEDIUM (XAMU)US patent 7828456, 7952293, 8002428 and CAN 2693131 & 2701653 and US & Int’l. patents pending
Type 3 Type FT Type 5 SS
HOSSHO
LIGHT OUTPUT - XAMULumens (Nominal)# of LEDS
Cool
Whi
te 13500165001240015000
14100173001320015800
12100148001120012500
128128128128Ne
utra
lW
hite
Fixtures comply with ANSI C136 .31-2010 American National Standard for Roadway Lighting Equipment - Luminaire Vibration 3G requirements .
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant enabled
enabled
IP65IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
39
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XAMU FT LED 128 HO CW UE WHT PCR
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
LUMINAIRE EPA CHART - XAMUSingle
D180°
D90°
T90°
TN120°
Q90°
1.4
2.8
2.4
4.0
4.0
4.7
FOOTNOTES:1- IMS, DIM and BLS cannot be ordered together.2 - Do not specify for satellite units.3- Not compatible with Virtinet wireless systems, DIM or BLS.4- Photocell must be ordered separately. See Accessories.5 - House Side Shield adds to fixture EPA. Consult factory.
6 - Factory installed PCR option required. 7 - Fusing must be located in the hand hole of pole.8 - Includes VCM. To be used in conjunction with VCM option in fixture. Consult factory.9 - To be used in conjunction with any of the VCM control modules and ES sensor option in fixture. Consult factory.
BKA-XBO-EC-6-CLR 6" Extension Arm 382136CLRBKS-XBO-WM-*-CLR Wall Mounting Bracket 382132CLRXAMU-3/FT-HSS House Side Shield (Black only) 524670BLK5
X4RPP Round Pole Plate for 4" Poles 379967CLRX5RPP Round Pole Plate for 5" Poles 379968CLRPC120 Photocell for use with PCR option (120V) 1225146
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 1225156
PC347 Photocell for use with PCR option (347V) 1595166
PC480 Photocell for use with PCR option (480V) 12251806
FK120 Single Fusing (120V) FK1207
FK277 Single Fusing (277V) FK2777
DFK208, 240 Double Fusing (208V, 240V) DFK208, 2407
DFK480 Double Fusing (480V) DFK4807
FK347 Single Fusing (347V) FK3477
ROSB120 - WL Remote Box with 120V Occupancy Sensor C/F8
ROSB277 - WL Remote Box with 277V Occupancy Sensor C/F8
RPSB120 - Wet Location Remote Box with 120V External Photocell C/F8
RPSB208-277 - Wet Location Remote Box with 208-277V External Photocell C/F8
PMOS120 - 120V Pole-Mount Occupancy Sensor 518030CLR9
PMOS208/240 - 208V, 240V Pole-Mount Occupancy Sensor C/F9
PMOS277 - 277V Pole-Mount Occupancy Sensor 518029CLR9
Note: House Side Shield adds to fixture EPA. Consult Factory.
Prefix FinishColorTemperature
XAMU LED 128 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480 - UniversalVoltage
(347-480V)
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Optional Sensor/OptionsOptional ControlsLightSource
Distribution # ofLEDs
SS - Super SaverHO -High Ouput
DriveCurrent
SensorES - External Sensor2
IMS - Integral Motion Sensor3
OptionsPCR - Photoelectric Control Receptacle4
3 - Type III5 - Type VFT - Forward Throw
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM - 0-10V Dimming (from external signal)1
BLS - Bi-level Switching (from external 120-277V signal)1
LED AREA LIGHTS - AEROMAXTM MEDIUM (XAMU)
DIMENSIONS (shown with VCM/VCMES option)
Front View Side View Bottom View
1-9/16"(39 mm)
6-3/8"(161 mm)
35-7/16"(900 mm)
5"(127 mm)
12-3/4"(324 mm)
18-5/16"(465 mm)
XAMU HSS - House Side Shield
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
40
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in both optical unit and driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
ENERGY SAVING CONTROL OPTIONS – DIM – 0-10 volt dimming enabled with controls by others . BLS – Bi-level switching responds to 120-277V signal from separate controller or sensor (by others) . Low light level decreased to 30% maximum drive current .
OCCUPANCY SENSOR (IMS) - Optional internal passive infrared motion sensor activates switching of luminaire light levels . High level light is activated and increased to full bright in 1-2 seconds upon detection of motion . Low light level (30% maximum drive current) is activated when target zone is absent of motion activity for ~ 2 minutes and ramps down (10-15 sec .) to low level . Sensor is located on the front of optical assembly . Sensor optic has a detection cone of approximately 45o . Examples of detection - occurs 30’ out from a 30’ mounting height pole .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5000°K nominal) or Neutral White (4000°K nominal) color temperature . 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types 3, FT and 5 . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - One-piece, die-formed aluminum, weather-tight housing contains factory prewired driver and field connections . Extruded one-piece EPDM gasketed wiring access door (with safety lanyard) located underneath and utilizes tool-less thumbscrew fastener .
OPTICAL UNIT - Clear tempered flat glass lens sealed to aluminum optics housing creates an IP67 rated, sealed optical unit (includes pressure-stabilizing breather) . Optical unit is recessed into housing cavity and sealed to the housing with extruded one-piece EPDM gasket . Optical unit lanyard serves dual purposes of safety and provides positive ground between unit and housing .
MOUNTING - Tapered rear design allows fixtures to be mounted to mast arms from 1-1/4” (1 .66” O .D .) to 2” (2 .375” O .D .) pipe using internal clamping bracket . Integral leveling device allowing +/- 5o vertical adjustment of the fixture, and leveling bubble accommodate variances in mast arm construction . Molded silicone barrier surrounds mast arm to restrict intrusion of insects and birds . If existing mast arm is larger than 2” (2 .375” O .D .) pipe, tenon reducers are available . Consult factory . LSI mast arms can be ordered separately . Fixture can be rotated with an up-tilt to 90o using cast aluminum adjustable bracket . Adjustable brackets available for mounting on 2” (2 .375” O .D .) pipe tenon or bolt-on mount with 5” traditional drilling pattern . See Accessory Ordering Information chart .
ELECTRICAL - A terminal block for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), and 347-480 VAC . Fixture Watts: SS - 139, HO - 176 nominal .
DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents (Drive currents are factory programmed) . Components fully encased in potting material for IP65 moisture resistance . Easily accessible driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 39 lbs . / 17 .7 Kg (fixture only) . Add mast arm weight for total shipping weight .
LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED ROADWAY LIGHTS - MEDIUM (XRMU)US patent 7828456, 7952293, 8002428 and CAN 2693131 & 2701653 and US & Int'l. patents pending
Type 3 Type FT Type 5 SS
HOSSHO
LIGHT OUTPUT - XRMULumens (Nominal)# of LEDS
Cool
Whi
te 13500165001240015000
14100173001320015800
12100148001120012500
128128128128Ne
utra
lW
hite
Fixtures comply with ANSI C136 .31-2010 American National Standard for Roadway Lighting Equipment - Luminaire Vibration 3G requirements .
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant enabled
enabled
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
41
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XRMU FT LED 128 HO CW UE WHT PCR
LUMINAIRE EPA CHART - XRMUSingle
D180°
1.4
2.8
Note: House Side Shield adds to fixture EPA. Consult Factory.
BracketDesignation
BracketType
BracketLength
BracketConfiguration
BracketFinish Catalog Number EPA Value Shipping Wt (kg/lbs)
EPAs and Shipping Weights
BKA PTB MAST ARM 4 - 4 Foot6 - 6 Foot8 - 8 Foot
BKA PTB MAST ARM 4 S BKA PTB MAST ARM 4 D180 BKA PTB MAST ARM 6 S BKA PTB MAST ARM 6 D180 BKA PTB MAST ARM 8 S BKA PTB MAST ARM 8 D180
1.93.62.34.53.26.2
4.1/96.8/155.4/129.5/217.3/16
13.2/29
S - SingleD180 - Double
BLK - BlackBRZ - BronzeGPT - Graphite
MSV - Metalic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - WhiteRAW - Raw Aluminum
with Satin Finish
TYPICAL ORDER EXAMPLE:
TENON MOUNT MAST ARM ORDERING INFORMATION
BKA PTB MAST ARM 4 S BLK
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
FOOTNOTES:1- IMS, DIM and BLS cannot be ordered together.2 - Do not specify for satellite units.3- Not compatible with Virtinet wireless systems, DIM or BLS.4- Photocell must be ordered separately. See Accessories.5 - House Side Shield adds to fixture EPA. Consult factory.
6 - Factory installed PCR option required. 7 - Fusing must be located in the hand hole of pole.8 - Includes VCM. To be used in conjunction with VCM option in fixture. Consult factory.9 - To be used in conjunction with any of the VCM control modules and ES sensor option in fixture. Consult factory.
BKA-NM-XRMU-ADJ-CLR 2” (2-3/8” O.D.) pipe tenon mount adjustable bracket kit 527793CLRBKA-BO-XRMU-ADJ-CLR Bolt-on mount adjustable bracket kit (order poles with 5” traditional drilling pattern) 530070CLRXRMU-3/FT-HSS House Side Shield (Black only) 524670BLK5
PC120 Photocell for use with PCR option (120V) 1225146
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 1225156
PC347 Photocell for use with PCR option (347V) 1595166
PC480 Photocell for use with PCR option (480V) 12251806
FK120 Single Fusing (120V) FK1207
FK277 Single Fusing (277V) FK2777
DFK208, 240 Double Fusing (208V, 240V) DFK208, 2407
DFK480 Double Fusing (480V) DFK4807
FK347 Single Fusing (347V) FK3477
ROSB120 - WL Remote Box with 120V Occupancy Sensor C/F8
ROSB277 - WL Remote Box with 277V Occupancy Sensor C/F8
RPSB120 - Wet Location Remote Box with 120V External Photocell C/F8
RPSB208-277 - Wet Location Remote Box with 208-277V External Photocell C/F8
PMOS120 - 120V Pole-Mount Occupancy Sensor 518030CLR9
PMOS208/240 - 208V, 240V Pole-Mount Occupancy Sensor C/F9
PMOS277 - 277V Pole-Mount Occupancy Sensor 518029CLR9
Prefix FinishColorTemperature
XRMU LED 128 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480 - UniversalVoltage
(347-480V)
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Optional Sensor/OptionsOptional ControlsLightSource
Distribution # ofLEDs
SS - Super SaverHO -High Ouput
DriveCurrent
SensorES - External Sensor2
IMS - Integral Motion Sensor3
OptionsPCR - Photoelectric Control Receptacle4
3 - Type III5 - Type VFT - Forward Throw
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM - 0-10V Dimming (from external signal)1
BLS - Bi-level Switching (from external 120-277V signal)1
DIMENSIONS (shown with VCM/VCMES option)
Front View
Side View
Bottom View
1-9/16"(39 mm)
6-3/8"(161 mm)
35-7/16"(900 mm)
18-5/16"(465 mm)
5" (127 mm)12-3/4"
(324 mm)
XRMU HSS - House Side Shield
Tenon Mount Mast Arm
10”(254 mm) 32”
(813 mm)
10”(254 mm)
4’, 6’, 8’ Nominal 8’,12’, 16’ Nominal
Single D 180
Adjustable Brackets
Tenon Mount (527793CLR)Bolt-on (530070CLR)
10-5/16"(262 mm)
13-11/16"(348 mm)
8-15/16"(227 mm)10-1/16"
(256mm)
LSI MAST ARM: Available in 4’, 6’ and 8’ nominal arm lengths with single (S) and double arms at 180º (D180) mounting configurations. All arms have a 32” rise. Hub mounts to 2” (2.375” O.D.) pipe size x 4-3/4” tall tenon. For use with Tenon Mount (N) poles (See separate data sheets).
LED ROADWAY LIGHTS - MEDIUM (XRMU)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
42
AR
EA
/ P
OL
ES
DARK-SKY FRIENDLY
HIGH EFFICIENCY, HIGH OUTPUT - Provides high lumen output (up to 42,200 lumens) without sacrificing efficacy; up to 106 LPW (SS), 99 LPW (HO) and 88 LPW (VHO) .
UNIQUE OPTICAL SYSTEM - Proprietary (patent pending) angled optical assemblies provide exceptionally wide throw for unrivaled pole spacing .
SMARTTEC™ - Sensors in driver enclosure reduce driver current when ambient temperatures exceed 50oC . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
ENERGY SAVING CONTROL OPTIONS - DIM - 0-10 volt dimming enabled with controls by others . BLS - Bi-level switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 30% maximum drive current .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Range of LEDs between 168 and 224 offered in Cool White (5000oK nominal) or Neutral White (4000oK nominal) color temperature . 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Available in wide throw (Type 5) and extended wide throw (Type 5X, AIX, FTX, FTAX) distributions . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass . FTX-L, FTX-R, FTAX-L and FTAX-R allow for D180o mounting configurations with factory set optics for front row automotive applications .
HOUSING - One-piece die-cast aluminum housing contains four gasketed die-cast aluminum optical assemblies . Self-cleaning, vertically oriented structural ribs cast into housing allow for maximum heat dissipation . All hardware is stainless steel or electro-zinc plated steel .
OPTICAL UNITS - Clear tempered optical-grade glass lens sealed to die-cast aluminum optic assemblies creates super-tight IP67 protection . Lens is mounted perpendicular to LED light output . LEDs are angled to produce widest distribution with highest efficacy possible . Pressure stabilizing breather allows super-tight IP67 protection while preventing temperature cycling from building up internal pressures and vacuums that can stress seals and components .
MOUNTING - Use with 5” traditional drilling pattern . Die-cast mounting arm, with gasket supplied for use between pole and arm, mounts to round or square pole . Round pole plate not required . Standard fixture arm allows for 90o and 120o mounting configurations . Mounting arm wiring access panel (with safety lanyard) utilizes a tool-less thumbscrew fastener .
ELECTRICAL - Terminal block, in mounting arm, for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input) and 347-480VAC . Optional twistlock photocell receptacle is available . Photocell must be ordered separately . Fixture watts (nominal): Type 5, Type 5X and Type AIX (SS - 240; HO - 312; VHO - 491)
Type FTX and Type FTAX (SS - 285; HO - 366)
DRIVERS - Available in SS (Super Saver), HO (High Output) and VHO (Very High Output) drive currents (Drive currents are factory programed .) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards . Drivers can be easily accessed by removing tethered access cover .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 65 lbs ./29 .5Kg
LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED AREA LIGHTS - STERLING™ (XSB)US patents D676182, D675361, 7828456, 8002428 & 7952293 and CN patents 2693131 & 2701653 and US & Int’l. patents pending
Type 5 Type 5X Type AIX Type FTX Type FTAX
SSHOVHO
SSHOVHO
LIGHT OUTPUT - XSBLumens (Nominal)
Cool
Whi
te 2260026400
-
1820022300
-
254003100042200
207002610035200
-2880041300
-2480035300
2460029200
-
2090024300
-
2480029000
-
2120024600
-Neut
ral W
hite
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
enabled
enabled
ARRAFunding Compliant
IP65IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
43
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XSB FTX LED HO CW UE WHT VCM
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
LUMINAIRE EPA CHART - XSBSingle
D180°
D90°
T90°
TN120°
Q90°
1.4
2.7
2.6
4.0
4.2
5.3
FOOTNOTES:1 - DIM and BLS cannot be ordered together.2 - Do not specify for satellite units. 3- Photocell must be ordered separately. See Accessories.4 - House Side Shields add to fixture EPA. Consult factory.
5 - Factory installed PCR option required. See Options.6 - Fusing must be located in the hand hole of pole.7 - Includes VCM. To be used in conjunction with VCM option in fixture. Consult factory.8 - To be used in conjunction with any of the VCM control modules and ES sensor option in fixture.
Consult factory.
XSB-FTX/FTAX-HSS House Side Shield (Black only)4 525144BLKXSB PLS Polycarbonate Shield 526013BKS-BO-WM-*-CLR Wall Mounting Bracket 123111CLRPC120 Photocell for use with PCR option (120V) 1225145
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 1225155
PC347 Photocell for use with PCR option (347V) 1595165
PC480 Photocell for use with PCR option (480V) 12251805
FK120 Single Fusing (120V) FK1206
FK277 Single Fusing (277V) FK2776
DFK208, 240 Double Fusing (208V, 240V) DFK208, 2406
DFK480 Double Fusing (480V) DFK4806
FK347 Single Fusing (347V) FK3476
ROSB120 - WL Remote Box with 120V Occupancy Sensor C/F7
ROSB277 - WL Remote Box with 277V Occupancy Sensor C/F7
RPSB120 - Wet Location Remote Box with 120V External Photocell C/F7
RPSB208-277 - Wet Location Remote Box with 208-277V External Photocell C/F7
PMOS120 - 120V Pole-Mount Occupancy Sensor 518030CLR8
PMOS208/240 - 208, 240V Pole-Mount Occupancy Sensor C/F8
PMOS277 - 277V Pole-Mount Occupancy Sensor 518029CLR 8Note: House Side Shield adds to fixture EPA. Consult Factory.
LEFT AND RIGHT VERSIONS OF TYPE FTX & FTAX REFLECTORS (TOP VIEW)
Use TypeFTX-L & FTAX-L
(left)
Use TypeFTX-R & FTAX-R
(right)pole
Area to be Lit
Note: Distributions are not field-rotatable. For D180 Forward Throw installations specify left (FTX-L or FTAX-L) and/or right (FTX-R or FTAX-R) side mounting. Orientation is based on standing at the pole and looking out at the area to be lit.
DIMENSIONS
Top View
Side View
House Side Sheild (525144BLK)
Front View
PolycarbonateShield - PLS
8-3/8"(213 mm)
6"(152 mm)
5-5/16"(135 mm)
23-1/4"(591 mm)
23-1/4"(591 mm)
32-3/4"(832 mm)
3-5/8"(92 mm)
8-7/8"(225 mm)
Prefix FinishColorTemperature
XSB LED CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277V)
347-480 UniversalVoltage
(347-480V)
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Sensor/OptionsControlsLightSource
Distribution
SS - Super Saver (5,5X,FTX, FTAX only)
HO -High Output
VHO -Very High Output (Type 5X and
AIX only)
DriveCurrent
SensorES2 - External Sensor
OptionsPCR - Photoelectric
Control Receptacle3
5 - Type V
5X - Type V Extended
AIX - Automotive Interior Extended
FTX - Type FT Extended
FTX-L - Type FT Extended Optic Rotated for D180 Mount (Left Side)
FTX-R - Type FT Extended Optic Rotated for D180 Mount (Right Side)
FTAX - Forward Throw Automotive Extended
FTAX-L - Forward Throw Automotive Extended Optic Rotated for D180 Mount (Left Side)
FTAX-R - Forward Throw Automotive Extended Optic Rotated for D180 Mount (Right Side)
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM1 - 0-10V Dimming (from external signal)BLS1 - Bi-level Switching (from external signal - requires 120-277V
controls system voltage)
LED AREA LIGHTS - STERLING™ (XSB)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
44
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in both optical and driver enclosure reduce driver current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5250°K nominal) or Neutral White (4100°K nominal) color temperature, 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Type 3, 5 and FT . Exceptional uniformity with full cutoff creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - Radiused, rectangular-shaped, aluminum housing with stainless steel or electro-zinc plated steel mounting hardware .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum housing creates an IP67 rated, sealed optical unit . Pressure stabilizing breather allows super-tight protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals . Patented integral single-blade heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture . Two stainless steel captive fasteners allow easy access to driver . One-piece extruded EPDM gasket seals optical assembly against housing .
MOUNTING - Use with 5” traditional drilling pattern . An extruded radius 8” arm is shipped standard and compatible with all fixture mounting configurations . The fixture may also be mounted to 3”-5” round poles using the round pole plate adaptor accessory (RPP2), which must be ordered separately .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (UE-50/60Hz input) and 347-480VAC . Optional twistlock photocell receptacle is available . Photocell must be ordered separately . Fixture Watts: 350 mA - 141, 450 mA - 187 nominal .
DRIVER - Available in 350mA and 450mA drive currents . (Drive currents are factory programmed) . State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with FCC 47 CFR part 15 RFI/EMI standard .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
FINISH - Fixtures are finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard colors include bronze, black, platinum plus, graphite, satin verde green, metallic silver and white . Meets requirements of ASTM B117 1000-hour salt fog and ASTM G155 1000-hour Xenon Arc UV tests (supersedes G53 UVB313) .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 33 lbs ./15Kg
LISTING - ETL listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED AREA LIGHTS - CHALLENGER® MEDIUM (XCHM3)US patent 7828456, 8002428 and CAN 2736757 & 2736757 and MX patent 29631 and ISRL 49679 and AUS 2008312668 and US & Int’l. patents pending
Type 3 Type 5 Type FTLumens (Nominal)# of LEDS
350 mA 128 12200 10500 12700450 mA 128 14500 12600 15300
350 mA 128 11200 11000 11800450 mA 128 13000 12700 13700
Cool
Whi
teNe
utra
l Whi
te
LIGHT OUTPUT - XCHM3
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
45
AR
EA
/ P
OL
ES
LED AREA LIGHTS - CHALLENGER® MEDIUM (XCHM3)
Prefix FinishColor Temperature
XCHM3 - LED Challenger Medium
LED 128 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
OptionsLight SourceDistribution # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XCHM3 FT LED 128 450 CW UE WHT PCR
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
PC120 - Photocell 122514+PC208-277 - Photocell for 208V, 240V or 277V 122515+PC347 - Photocell 159516+PC480 - Photocell 1225180+RPP2 - Round Pole Plate 162914CLRFK120 - Single Fusing FK120++
FK277 - Single Fusing FK277++
DFK208, 240 - Double Fusing DFK208,240++DFK480 - Double Fusing DFK480++FK347 - Single Fusing FK347++
XCHM3 HSS - House Side Shield for Type 3 and FT 496128BLK+++BKS-BO-WM-*-CLR - Wall Mount Plate 123111CLRBKA-BO-RA-8-CLR - Radius Arm 169010CLRBKU-BO-S-19-CLR - Upsweep Bracket for Round
and Square Poles 144191CLR
Description Order Number
LUMINAIRE EPA CHART - XCHM3
Single
D180°
D90°
T90°
TN120°
Q90°
NOTE:1 - Photocell must be ordered separately - see Accessories.
350 - 350mA450 - 450mA
Drive Current
PCR - Photoelectric Control Receptacle1
3 - Type III
5 - Type V
FT - Forward Throw
NOTES: +Factory installed PCR option required. ++Fusing must be located in the hand hole of the pole.+++Black only. House Side Shield adds to fixture EPA. Consult Factory.
1.4
2.9
2.5
4.0
4.1
5.1
Note: House Side Shield adds to fixture EPA.Consult Factory.
DIMENSIONS
HOUSE SIDE SHIELD (496128BLK)
11-7/16"
2-1/2"
3-9/16"
17-5/8"
2-1/2"
17-5/8"
5-3/8"
23-1/2"
9-1/8"
8"
5-3/8"
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
46
AR
EA
/ P
OL
ES
APPLICATIONS - Converts Challenger Medium (CH2VM, CH2HM, CHVM and CHHM) from HID to LED light source .
EASY RETROFIT - Includes gasketed, hinged optical assembly with driver . Simply remove the existing door, HID ballast and reflector assembly, install the new hinged LED optic/door assembly, connect fixture supply leads to the driver and close the door .
“GREEN” ENERGY-SAVING - Reduces greenhouse gas emissions, slashes operating costs, extends life and eliminates costly lamp replacement and disposal involving mercury waste .
SMARTTEC™ THERMAL CONTROL - Sensors in both optical and driver enclosure reduce driver current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5250°K nominal) or Neutral White (4100°K nominal) color temperature, 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Type 3, 5 and FT . Exceptional uniformity with full cutoff creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum housing creates an IP67 rated, sealed optical unit . Pressure stabilizing breather allows super-tight protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals . Patented integral single-blade heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture . Two stainless steel captive fasteners allow easy access to driver . One-piece extruded EPDM gasket seals optical assembly against housing .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (UE-50/60Hz input) and 347-480VAC . Fixture Watts: 350 mA - 141, 450 mA - 187 nominal .
DRIVER - Available in 350mA and 450mA drive currents . (Drive currents are factory programmed) . State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with FCC 47 CFR part 15 RFI/EMI standard .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
FINISH - Kits are finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard colors include bronze, black, platinum plus, graphite, satin verde green, metallic silver and white .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 22 lbs ./10Kg
LISTING - ETL listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED RETROFIT KIT FOR CHALLENGER® MEDIUM (XCHM3K)US patent 7828456, 8002428 and CAN 2736757 & 2736757 and MX patent 29631 and ISRL 49679 and AUS 2008312668 and US & Int’l. patents pending
Type 3 Type 5 Type FT
LIGHT OUTPUT - XCHM3KLumens (Nominal)# of LEDS
350 mA 128 12200 10500 12700450 mA 128 14500 12600 15300
350 mA 128 11200 11000 11800450 mA 128 13000 12700 13700
Cool
Whi
teNe
utra
l Whi
te
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet locationARRAFunding Compliant IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
47
AR
EA
/ P
OL
ES
LED RETROFIT KIT FOR CHALLENGER® MEDIUM (XCHM3K)
Prefix FinishColor Temperature
XCHM3K - LED Retrofit Kit for
Challenger Medium
LED 128 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Light SourceDistribution # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XCHM3K FT LED 128 450 CW UE WHT
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
FK120 - Single Fusing FK120+FK277 - Single Fusing FK277+DFK208, 240 - Double Fusing DFK208,240+DFK480 - Double Fusing DFK480+FK347 - Single Fusing FK347+XCHM3K HSS - House Side Shield for Type 3 and FT 496128BLK++
Description Order Number
NOTE:XCHM3Ks will retrofit existing Challenger Medium fixtures with GR and TE options. However, due to no longer needing to relamp, the retrofit kits do not offer these options.
350 - 350mA450 - 450mA
Drive Current
3 - Type III
5 - Type V
FT - Forward Throw
NOTES: +Fusing must be located in the hand hole of the pole. ++Black only. Housing side shields adds to fixture EPA. Consult Factory
DIMENSIONS
22-11/16"
17"
5-3/8"
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
48
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in both optical unit and driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
OCCUPANCY SENSING (IMS) – Optional integral passive infrared motion sensor activates switching of luminaire light levels . High level light is activated and increased to full bright in 1-2 seconds upon detection of motion . Low light level (30% maximum drive current) is activated when target zone is absent of motion activity for ~2 minutes and ramps down (10-15 seconds) to low level to allow eyes time to adjust . Sensor is located on the front of optical assembly and rotates with the optic . Sensor optic has a detection cone of approximately 45o . Examples of detection – occurs 30' out from a 30' mounting height pole; occurs 20' out from a 20' mounting height pole .
ENERGY SAVING CONTROL OPTIONS – DIM – 0-10 volt dimming enabled with controls by others . BLS – Bi-level switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 30% maximum drive current .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5250°K nominal) or Neutral White (4100°K nominal) color temperature, 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types 3, 5, FT and FTA available . Reflectors are field rotatable .
HOUSING - Square, die-formed aluminum . Fully enclosed weather-tight housing contains factory prewired drivers and field connections .
TOP-ACCESS COVER - Tethered top-access cover provides ease of installation and allows for easy driver access . Four captive stainless-steel fasteners secure the top-access cover to the housing .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum housing creates an IP67 rated, sealed optical unit (includes pressure stabilizing breather) . Optical unit can be easily field rotated in 90o increments . Directional arrow on optics allows alignment without the unit being energized .
MOUNTING - 2-1/2” x 5-3/8” x 12” extruded aluminum arm mounting bracket shipped standard . Use with 5” traditional drilling pattern . Round Pole Plate (RPP2) required for mounting to 3”– 5” round poles . (See Accessory Ordering Information chart .)
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (UE - 50/60Hz input), and 347-480VAC . Fixture Watts: 350 mA - 143, 450 mA - 185 nominal .
DRIVER - Available in 350mA and 450mA drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with FCC 47 CFR part 15 RFI/EMI standard .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years .
DECAL STRIPING - LSI offers optional color-coordinated decals in 9 standard colors to accent the fixture . Decals are guaranteed for five years against peeling, cracking, or fading .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 32 lbs (14 .5 kg) fixture; 5 lbs . (2kg) arm
LISTING - ETL listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED AREA LIGHTS - (XGB3) 128US patent D574994 & 7,828,456 and MX patent 29631 and US & Int’l. patents pending
Type 3 Type 5 Type FT Type FTA
LIGHT OUTPUT - XGB3 128Lumens (Nominal)# of LEDS
350 mA 128 11800 10500 12700 12700450 mA 128 14400 12600 15300 15600
350 mA 128 10800 10100 11800 13342450 mA 128 12600 12700 13700 15700
Cool
Whi
teNe
utra
l Whi
te
Shown with optional decal striping
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant enabled
enabled
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
49
AR
EA
/ P
OL
ES
Prefix FinishColorTemperature
XGB31 - LEDGreenbriar
LED 128 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Optional Color Decals45 – Light Gold20 – Charcoal Metallic55 – Black94 – Blue Metallic59 – Dark Green51 – Dark Red21 – Tomato Red50 – White700 – Aztec Silver Metallic
Optional Sensor/OptionsOptional ControlsLightSource
Distribution # ofLEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XGB3 5 LED 128 350 CW UE WHT VCM ES
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
465915 BLK465915 BLK465915 BLK162914BLK123111CLR169010CLR144191CLR
XGB3-128 - HSS - House Side Shield (Black only)5
XGB3-128 - LSS - House Side Shield Left Side (Black only)5
XGB3-128 - RSS - House Side Shield Right Side (Black only)5
RPP2 - Round Pole Plate BKS-BO-WM-*-CLR - Wall Mount Plate BKA-BO-RA-8-CLR - Radius Arm BKU-BO-S-19-CLR - Upsweep Bracket for round or square poles
Description Order Number Order NumberLUMINAIRE EPA CHART2 - XGB3 128
8" Bracket 12" Bracket
FOOTNOTES:1 - Use with 5” traditional drilling pattern2 - IMS, DIM and BLS are not compatible.3 - Do not specify for satellite units. 4 - Not compatible with Virtinet wireless systems, DIM or BLS.
350 - 350mA450 - 450mA
DriveCurrent
SensorES3 - External SensorIMS4 - Integral Motion SensorPCI 120 - 120v Button-Type PhotocellPCI 208 - 208v Button-Type PhotocellPCI 240 - 240v Button-Type PhotocellPCI 277 - 277v Button-Type PhotocellPCI 347 - 347v Button-Type Photocell
Options8BK - 8" Bracket (S and D180 only)TB - Terminal Block
C/F6
C/F6
C/F6
C/F6
ROSB120 - WL Remote Box with 120V Occupancy SensorROSB277 - WL Remote Box with 277V Occupancy SensorRPSB120 - Wet Location Remote Box with 120V External PhotocellRPSB208-277 - Wet Location Remote Box with
208-277V External PhotocellPMOS120 - 120V Pole-Mount Occupancy Sensor 518030CLR7
PMOS208/240 - 208, 240V Pole-Mount Occupancy Sensor C/F7
PMOS277 - 277V Pole-Mount Occupancy Sensor 518029CLR7
Description
FT - Forward ThrowFTA - Forward Throw Automotive3 - Type III5 - Type V
2.1
4.3
2.3
4.6
4.1
6.7
6.8
8.2
12" Bracket
Required
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM2 - 0-10V Dimming (from external signal)BLS2 - Bi-level Switching (from external signal - requires 120-277V controls system voltage)
5 - House Side Shield adds to fixture EPA. IMS Sensor not available with LSS & RSS. HSS must be mounted opposite of IMS. Consult factory.6 - Includes VCM. To be used in conjunction with VCM option in fixture. Consult factory.7 - To be used in conjunction with any of the VCM control modules and ES sensor option in fixture.
Consult factory.
Note: House Side Shield adds to fixture EPA. Consult Factory.
LED AREA LIGHTS - (XGB3) 128
DIMENSIONS
21 3/4”(552 mm)
9”(229 mm)
3 9/16”(91 mm)
12”(305 mm)
12 3/8”(314 mm)
House Side Shield (465915 BLK)
9”(229 mm)
5/8”(16 mm)
1-3/8”(35 mm)
OPTIONAL IMS
2-1/4”(57 mm)
4-1/8”(105 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
50
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in both optical unit and driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
OCCUPANCY SENSING (IMS) – Optional integral passive infrared motion sensor activates switching of luminaire light levels . High level light is activated and increased to full bright in 1-2 seconds upon detection of motion . Low light level (30% maximum drive current) is activated when target zone is absent of motion activity for ~2 minutes and ramps down (10-15 seconds) to low level to allow eyes time to adjust . Sensor is located on the front of optical assembly and rotates with the optic . Sensor optic has a detection cone of approximately 45o . Examples of detection – occurs 30' out from a 30' mounting height pole; occurs 20' out from a 20' mounting height pole .
ENERGY SAVING CONTROL OPTIONS – DIM – 0-10 volt dimming enabled with controls by others .
BLS – Bi-level switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 30% maximum drive current .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5250°K nominal) or Neutral White (4100°K nominal) color temperature, 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types 3, 5, FT and FTA available - field rotatable reflectors .
HOUSING - Square, die-formed aluminum . Fully enclosed weather-tight housing contains factory prewired drivers and field connections .
TOP-ACCESS COVER - Tethered top-access cover provides ease of installation and allows for easy driver access . Four captive stainless-steel fasteners secure the top-access cover to the housing .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum housing creates an IP67 rated, sealed optical unit (includes pressure stabilizing breather) . Optical unit can be easily field rotated in 90o increments . Directional arrow on optics allows alignment without the unit being energized .
MOUNTING - 2-1/2” x 5-3/8” x 12” extruded aluminum arm mounting bracket shipped standard . Use with 5” traditional drilling pattern . Round Pole Plate (RPP2) required for mounting to 3”– 5” round poles . (See Accessory Ordering Information chart .)
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (UE - 50/60Hz input), and 347-480VAC . Fixture Watts: 350 mA - 195, 450 mA - 260 nominal .
DRIVERS - Available in 350mA and 450mA drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with FCC 47 CFR part 15 RFI/EMI standard .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years .
DECAL STRIPING - LSI offers optional color-coordinated decals in 9 standard colors to accent the fixture . Decals are guaranteed for five years against peeling, cracking, or fading .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - Fixture - 44 .5 lbs (20 kg) Arm - 5 lbs . (2kg) arm
LISTING - ETL listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED AREA LIGHTS - (XGB3) 176US patent D574994 & 7,828,456 and MX patent 29631 and US & Int’l. patents pending
Type 3 Type 5 Type FT Type FTA
LIGHT OUTPUT - XGB3 176Lumens (Nominal)# of LEDS
350 mA 176 17200 16600 18100 20600450 mA 176 20700 20000 21600 24900
350 mA 176 15160 14700 16300 18500450 mA 176 17600 17400 18900 21600
Cool
Whi
teNe
utra
l Whi
te
Shown with optional decal striping
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant enabled
enabled
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
51
AR
EA
/ P
OL
ES
Prefix FinishColorTemperature
XGB31 - LEDGreenbriar
LED 176 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Optional Color Decals45 – Light Gold20 – Charcoal Metallic55 – Black94 – Blue Metallic59 – Dark Green51 – Dark Red21 – Tomato Red50 – White700 – Aztec Silver Metallic
Optional Sensor/OptionsOptional ControlsLightSource
Distribution # ofLEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XGB3 5 LED 176 350 CW UE WHT VCM ES
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
482002 BLK482002 BLK482002 BLK162914BLK123111CLR169010CLR144191CLR
XGB3-176 - HSS - House Side Shield (Black only)5
XGB3-176 - LSS - House Side Shield Left Side (Black only)5
XGB3-176 - RSS - House Side Shield Right Side (Black only)5
RPP2 - Round Pole Plate BKS-BO-WM-*-CLR - Wall Mount Plate BKA-BO-RA-8-CLR - Radius Arm BKU-BO-S-19-CLR - Upsweep Bracket for round or square poles
Description Order Number Order NumberLUMINAIRE EPA CHART2 - XGB3 176
Single
D180°
D90°
T90°
TN120°
Q90°
8" Bracket 12" Bracket
FOOTNOTES:1 - Use with 5” traditional drilling pattern2 - IMS, DIM and BLS are not compatible.3 - Do not specify for satellite units. 4 - Not compatible with Virtinet wireless systems, DIM or BLS.
350 - 350mA450 - 450mA
DriveCurrent
SensorES3 - External SensorIMS4 - Integral Motion SensorPCI 120 - 120v Button-Type PhotocellPCI 208 - 208v Button-Type PhotocellPCI 240 - 240v Button-Type PhotocellPCI 277 - 277v Button-Type PhotocellPCI 347 - 347v Button-Type Photocell
Options8BK - 8" Bracket (S and D180 only)TB - Terminal Block
C/F6
C/F6
C/F6
C/F6
ROSB120 - WL Remote Box with 120V Occupancy SensorROSB277 - WL Remote Box with 277V Occupancy SensorRPSB120 - Wet Location Remote Box with 120V External PhotocellRPSB208-277 - Wet Location Remote Box with
208-277V External PhotocellPMOS120 - 120V Pole-Mount Occupancy Sensor 518030CLR7
PMOS208/240 - 208, 240V Pole-Mount Occupancy Sensor C/F7
PMOS277 - 277V Pole-Mount Occupancy Sensor 518029CLR7
Description
FT - Forward ThrowFTA - Forward Throw Automotive3 - Type III5 - Type V
2.3
4.7
2.4
4.8
4.7
7.2
7.3
8.8
12" Bracket
Required
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM2 - 0-10V Dimming (from external signal)BLS2 - Bi-level Switching (from external signal - requires 120-277V controls system voltage)
5 - House Side Shield adds to fixture EPA. IMS Sensor not available with LSS & RSS. HSS must be mounted opposite of IMS. Consult factory.6 - Includes VCM. To be used in conjunction with VCM option in fixture. Consult factory.7 - To be used in conjunction with any of the VCM control modules and ES sensor option in fixture.
Consult factory.
Note: House Side Shield adds to fixture EPA. Consult Factory.
LED AREA LIGHTS - (XGB3) 176
DIMENSIONS
24” sq. (610 mm)
9”(229 mm)
12”(305 mm)
3 15/16”(99 mm)
13 5/16”(339 mm)
House Side Shield (482002BLK)9”
(229 mm)
5/8”(16 mm)
1-3/8”(35 mm)
OPTIONAL IMS
2-1/4”(57 mm)
4-1/8”(105 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
52
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in the driver enclosure reduce driver current when ambient temperatures exceed 50oC . Current is lowered in imperceptible 5% increments every 5 minutes until safe temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5800oK nominal) or Neutral White (4000oK nominal) color temperature . 70 CRI (nominal)
DISTRIBUTION/PERFORMANCE - Types 2, 3, FT and 5 . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - One-piece, die-cast aluminum in a multi-radiused, rectangular shape with mounting arm cast in as an integral part of the housing . All hardware is stainless steel or electro-zinc plated steel .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to die-cast aluminum door assembly . Secures to housing with stainless steel hinge bracket . Integral over-center latch allows easy tool-less access to driver . Optic provided with catch mechanism that limits door swing . One-piece extruded silicone gasket seals optical assembly against the housing .
MOUNTING - Use with 5” traditional drilling pattern . Integral cast mounting arm is flat for square pole applications . Use round pole adaptor (RPPC) to mount to round poles . RPPC must be ordered separately . Extruded 6” arm extension is available (but not required) .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (UE-50-60Hz input) and 347-480VAC . Optional button- type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified) . Fixture watts (nominal): LW - 54, SS - 75 .
DRIVER - Available in LW (low wattage) and SS (super saver) drive currents . (Drive currents are factory programmed .) State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with requirements of FCC title 47CFR Part 15, Class A and B: Part 18, Class A .
OPERATING TEMPERATURE - -40oC to +50oC (-40oF to +122oF)
FINISH - Fixtures are finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard colors include bronze, black, platinum plus, graphite, satin verde green, metallic silver and white . Meets requirements of ASTM B117 1000-hour salt fog and ASTM G155 1000-hour Xenon Arc UV tests (supersedes G53-UVB313) .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT - 30 lbs ./13 .6Kg
LISTING - ETL listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED AREA LIGHTS - PATRIOT® SMALL (XPTS3) US patent 7828456, 7952293, 8002428, 8177386 and CAN 2736757 and MX patent 29631 and ISRL 49679 and AUS 2008312668 and US & Int’l. patents pending
Type 2 Type 3 Type FT Type 5
Cool
Whi
teNe
utra
lW
hite
LIGHT OUTPUT - XPTS3Lumens (Nominal)# of
LEDS
LW 63 4300 4100 4500 3300SS 63 5400 5100 5600 4200LW 63 3700 3800 4000 2900SS 63 4900 5000 5100 3900
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant
IP65
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
53
AR
EA
/ P
OL
ES
LED AREA LIGHTS - PATRIOT® SMALL (XPTS3)
Prefix FinishColor Temperature
XPTS3 - LED Patriot Small
LED 63 CW - Cool White NW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
OptionsLight SourceDistribution # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XPTS3 FT LED 63 SS CW UE WHT PCI120
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
RPPC - Round Pole Plate 141940CLRFK120 - Single Fusing FK120+
FK277 - Single Fusing FK277+
DFK208, 240 - Double Fusing DFK208,240+
DFK480 - Double Fusing DFK480+
FK347 - Single Fusing FK347+
Description Order Number
LUMINAIRE EPA CHART - XPT3
Single
D180°
D90°
T90°
TN120°
Q90°
SS - Super SaverLW - Low Watt
Drive Current
PCI120 - 120V Button-Type PhotocellPCI208-277 - 208-277V Button-Type
PhotocellPCI347 - 347V Button-Type PhotocellTB - Terminal Block
Description Order Number
NOTES: +Fusing must be located in the hand hole of pole. ++Black only.
1.1
2.1
1.6
2.7
2.8
3.2
Note: House Side Shield adds to fixture EPA. Consult Factory.
XPTS3 HSS - House Side Shield Type 2, 3, FT 516850BLK++
XPTS3 PLS - Polycarbonate Shield 263016BKS-BO-PTS-WM-*-CLR - Wall Mount Plate 263230CLRBKA-BO-PTS-EC-6-CLR - Extension Arm 263228CLRBKA-BO-RA-8-CLR - Radius Arm 169010CLRBKU-BO-S-19-CLR - Upsweep Bracket for Round and Square Poles 144191CLR
2- Type II3 - Type IIIFT - Forward Throw5 - Type V
6-1/2”(165 mm)
13-1/2”(342 mm)
3-1/4 ”(81 mm)
3-1/8 ”(78 mm)
22-1/2”(572 mm)
DIMENSIONS
House Side Shield (HSS)Rear Mounted (516850 BLK)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
54
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in both optical and driver enclosure reduce driver current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
OCCUPANCY SENSING (IMS) – Optional integral passive infrared motion sensor activates switching of luminaire light levels . High level light is activated and increased to full bright in 1-2 seconds upon detection of motion . Low light level (30% maximum drive current) is activated when target zone is absent of motion activity for ~2 minutes and ramps down (10-15 seconds) to low level to allow eyes time to adjust . Sensor is located on the rear of optical assembly . Sensor optic has a detection cone of approximately 45o . Examples of detection – occurs 30' out from a 30' mounting height pole; occurs 20' out from a 20' mounting height pole .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5250oK nominal) or Neutral White (4100oK nominal) color temperature . 70 CRI (nominal)
DISTRIBUTION/PERFORMANCE - Type 3, 5 and FT . Exceptional uniformity with full cutoff creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - One-piece, die-cast aluminum in a multi-radiused, rectangular shape with mounting arm cast in as an integral part of the housing . All hardware is stainless steel or electro-zinc plated steel .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to die-cast aluminum door assembly . Secures to housing with stainless steel hinge bracket . Integral over-center latch allows easy tool-less access to driver . Optic provided with catch mechanism to limit door swing . One-piece extruded silicone gasket seals optical assembly against the housing .
MOUNTING - Use with 5” traditional drilling pattern . Integral cast mounting arm is flat for square pole applications . Use round pole adaptor (RPPC) to mount to round poles . RPPC must be ordered separately . Extruded 6” arm extension is available (but not required for 90° or 120° mounting configurations) .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (UE-50/60Hz input) and 347-480VAC . Optional twistlock photocell receptacle is available . Photocell must be ordered separately . Fixture Watts (nominal): 350mA - 144, 450mA - 188 .
DRIVER - Available in 350mA and 450mA drive currents . (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with FCC 47 CFR part 15 RFI/EMI standard .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
FINISH - Fixtures are finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 56 lbs /25 .4 Kg
LISTING - ETL listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED AREA LIGHTS - PATRIOT® (XPT3) US patent 7828456, 7952293, 8002428, 8177386 and CAN 2736757 and MX patent 29631 and ISRL 49679 and AUS 2008312668 and US & Int’l. patents pending
Type 3 Type 5 Type FT
Cool
Whi
teNe
utra
lW
hite
LIGHT OUTPUT - XPT3Lumens (Nominal)# of
LEDS
350mA 128 450mA 128 350mA 128 450mA 128
12100 1330014400 1580011600 1260013300 14700
12500146001170013400
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant
IP65
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
55
AR
EA
/ P
OL
ES
LED AREA LIGHTS - PATRIOT® (XPT3)
Prefix FinishColor Temperature
XPT3 - LED Patriot
LED 128 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277V)
347-480V
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
OptionsLight SourceDistribution # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XPT3 FT LED 128 450 CW UE WHT PCR
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
PC120 - Photocell 122514+
PC208-277 - Photocell for 208V, 240V or 277V 122515+
PC347 - Photocell 159516+
PC480 - Photocell 1225180+
RPPC - Round Pole Plate 141940CLRFK120 - Single Fusing FK120++
FK277 - Single Fusing FK277++
DFK208, 240 - Double Fusing DFK208,240++
DFK480 - Double Fusing DFK480++
FK347 - Single Fusing FK347++
Description Order Number
LUMINAIRE EPA CHART - XPT3
Single
D180°
D90°
T90°
TN120°
Q90°
NOTE:1 - This is a non-field-rotatable optic. For retrofit applications in which the original metal halide product was rotated
and LED version will require a non-standard orientation, consult factory. 2 - Photocell must be ordered separately - see Accessories.
350 - 350mA450 - 450mA
Drive Current
PCR - Photoelectric Control Receptacle2
TB - Terminal BlockIMS - Integral Motion Sensor
Description Order Number
3 - Type III
5 - Type V
FT - Forward Throw1
NOTES: +Factory installed PCR option required. ++Fusing must be located in the hand hole of pole.
+++Black only. House Side Shields add to fixture EPA.
1.5
3.0
2.3
3.8
4.0
4.5
Note: House Side Shield adds to fixture EPA. Consult Factory.
XPT3 FT HSS RM- External House Side Shield - Rear Mount 520281BLK+++XPT3 PLS - Polycarbonate Shield 92730BKS-BO-WM-*-CLR - Wall Mount Plate 123111CLRBKA-BO-EC-6-CLR - Extension Arm 142862CLRBKA-BO-RA-8-CLR - Radius Arm 169010CLRBKU-BO-S-19-CLR - Upsweep Bracket for Round and Square Poles 144191CLR
DIMENSIONS
8-3/16”(208 mm)
3-9/16”(90 mm)
19-1/4”(449 mm)
30 -1/4”(768 mm)
House Side ShieldRear Mounted (520281BLK)
10-3/16”(258 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
56
AR
EA
/ P
OL
ES
Optic Only
APPLICATIONS - Converts Challenger Medium (CH2VM, CH2HM, CHVM and CHHM) from HID to LED light source .
EASY RETROFIT - Includes gasketed, hinged optical assembly with driver . Simply remove the existing door, HID ballast and reflector assembly, install the new hinged LED optic/door assembly, connect fixture supply leads to the driver and close the door .
“GREEN” ENERGY-SAVING - Reduces greenhouse gas emissions, slashes operating costs, extends life and eliminates costly lamp replacement and disposal involving mercury waste .
SMARTTEC™ THERMAL CONTROL - Sensors in both optical and driver enclosure reduce driver current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5250°K nominal) or Neutral White (4100°K nominal) color temperature, 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Type 3, 5 and FT . Exceptional uniformity with full cutoff creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum housing creates an IP67 rated, sealed optical unit . Pressure stabilizing breather allows super-tight protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals . Patented integral single-blade heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture . Two stainless steel captive fasteners allow easy access to driver . One-piece extruded EPDM gasket seals optical assembly against housing .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (UE-50/60Hz input) and 347-480VAC . Fixture Watts: 350 mA - 141, 450 mA - 187 nominal .
DRIVER - Available in 350mA and 450mA drive currents . (Drive currents are factory programmed) . State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with FCC 47 CFR part 15 RFI/EMI standard .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
FINISH - Kits are finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard colors include bronze, black, platinum plus, graphite, satin verde green, metallic silver and white .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 22 lbs ./10Kg
LISTING - ETL listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED RETROFIT KIT FOR PATRIOT® (XPT3K) US patent 7828456, 7952293, 8002428, 8177386 and CAN 2736757 and MX patent 29631 and ISRL 49679 and AUS 2008312668 and US & Int’l. patents pending
Type 3 Type 5 Type FT
Cool
Whi
teNe
utra
lW
hite
LIGHT OUTPUT - XPT3KLumens (Nominal)# of
LEDS
350mA 128 450mA 128 350mA 128 450mA 128
12100 1330014400 1580011600 1260013300 14700
12500146001170013400
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet locationARRAFunding Compliant
IP65
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
57
AR
EA
/ P
OL
ES
LED RETROFIT KIT FOR PATRIOT® (XPT3K)
Prefix FinishColor Temperature
XPT3K - Retrofit Kit for Patriot
LED 128 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Options
IMS - Integral Motion Sensor
Light SourceDistribution # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XPT3K FT LED 128 450 CW UE WHT
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
FK120 - Single Fusing FK120+
FK277 - Single Fusing FK277+
DFK208, 240 - Double Fusing DFK208,240+
DFK480 - Double Fusing DFK480+
FK347 - Single Fusing FK347+
XPT3K HSS - House Side Shield 520281BLK++
Description Order Number
350 - 350mA450 - 450mA
Drive Current
3 - Type III
5 - Type V
FT - Forward Throw
NOTES: +Fusing must be located in the hand hole of pole. ++Black only. House Side Shields add to fixture EPA. Consult Factory
DIMENSIONS
19-1/4”(449 mm)
7-1/16”(179 mm)
29 -7/16”(748 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
58
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in the driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5800oK nominal) or Neutral White (4000oK nominal) color temperature, 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types 2, 3, FT and 5 . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - Available in two-arm Post Top mount . One piece housing/support frame is die-cast aluminum . Post top access cover and support arms are die-cast aluminum . Housing is sealed with an extruded silicone gasket .
HOUSING TOP CAP - Removable spun aluminum cap/driver enclosure is retained by captive stainless steel fasteners and safety cables . Housing and top cap interface is sealed with a one-piece extruded silicone gasket . Tool-less entry option is available .
SEALED OPTICAL UNIT - Lens is clear, tempered, optical-grade flat glass, sealed to aluminum optics housing . Pressure stabilizing breather allows super-tight protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals and components .
FASTENERS - All exposed fasteners are black oxide coated stainless steel . Internal fasteners are stainless steel or zinc electroplated steel .
ELECTRICAL - Terminal block for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), 347VAC and 480VAC . Optional button-type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified) . Fixture Watts: 350mA - 75, 450mA - 98 nominal .
DRIVER - Available in 350mA and 450mA drive currents (Drive currents are factory programmed .) State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40oC to +50oC (-40oF to 122oF)
MOUNTING - Post Top and Wall mounting available . Pole selection information shown under fixture drawings .
FINISH - Fixtures are finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard colors include bronze, black, platinum plus, graphite, satin verde green, metallic silver and white .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED CONSTITUTION DECORATIVE AREA LIGHTS (XCN3)US patent 782456 and US & Int’l. patents pending
Type 2 Type 3 Type FT Type 5 350 mA
450 mA
350 mA
450 mA
Cool
Whi
te
LIGHT OUTPUT - XCN3Lumens (Nominal)
# of LEDS55006500
49005900
46005500
56006700
6363
Neut
ral
Whi
te 48005700
47005800
40004900
51006100
6363
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet locationARRAFunding Compliant
IP65
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
59
AR
EA
/ P
OL
ES
LED CONSTITUTION DECORATIVE AREA LIGHTS (XCN3)
32-7/16”(823mm)
Ø4”(102mm)
4-13/16”(122mm)
24-5/8”(625mm)
3-5/16”(84mm)
Post Top with WM Accessory
37-1/4”(946mm)
PT
PT
1.0
2.0
LUMINAIRE EPA CHART - Crossover Constitution
MOUNTING STYLE EPA
PT Single
PT D180°with BK MPT BO (2)
Ø4” (102mm) or Ø5” (127mm)
24-1/2”(622mm)
Ø4”(102mm)
Post Top with BK MPT BO (x2)Mounts to 4” or 5” Dia. D180 Bolt-on Pole
(select 3” reduced drilling pattern)
3-5/16”(84mm)
Ø25-1/2”(648mm)
21-7/8”(556mm)
Slipfitter fits 4ӯtenon or pole
13-7/16”(341mm)
4-7/16”(1131mm)
SHIPPING WEIGHTS - Crossover ConstitutionCatalog Number Est. Weight (kg/lbs.)
XCN3 20.4/45
Post Top SingleSlipfits 4” Dia. Tenon (4N) or Pole
TYPICAL ORDER EXAMPLE:
PrefixMounting
Style# of
LEDs
LUMINAIRE ORDERING INFORMATION
Input Voltage Finish Options
PT - Post Top BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteSVG - Satin Verde
GreenGPT - GraphiteMSV - Metallic Silver
FOOTNOTES:1- Order poles with 3" reduced drilling pattern. For PT mounting configurations other than D180, consult factory. Order one bracket per fixture.
XCN3 PT 5 LED 63 450 CW UE MSV PCI120
Accessories
Button Type Photocells PCI 120 - 120vPCHV208-277 - 208-277vPCI 347 - 347vTE - Tool-less Entry
WM - Wall Mount (PT only)BK MPT BO4 - Medium Bolt on Bracket (for PT 180)
For 4” Dia. Round Poles1
BK MPT BO5 - Medium Bolt on Bracket (for PT 180) For 5” Dia. Round Poles1
UE - UniversalElectronic
(120-277V 50/60Hz)
347-480
63
Distribution
2 - Type II3 - Type IIIFT - Forward
Throw5 - Type V
CW- Cool White(5800oK nom.)
NW- Neutral White(4000oK nom.)
LightSource Color Temperature
LEDXCN3 350 - 350mA450 - 450mA
Drive Current
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
60
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in the driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5800oK nominal) or Neutral White (4000oK nominal) color temperature, 70CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types 2, 3, FT, and 5 . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - Modular fixture is available in two mounting styles - Post Top and Side Mount . One piece housing/support frame is die-cast aluminum . Combination mounting arm/driver enclosure on side mount versions is die-cast with integral ribs for heat dissipation . Access cover and support arms for post top versions are die-cast aluminum .
HOUSING TOP CAP - Removable spun aluminum cap/post top driver enclosure is retained by captive stainless steel fasteners and safety cables . Housing and top cap interface is sealed with a one-piece extruded silicone gasket . Tool-less entry option is available .
SEALED OPTICAL UNIT - Lens is clear, flat tempered glass, sealed to aluminum optics housing . Pressure stabilizing breather allows super-tight protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals and components .
FASTENERS - All exposed fasteners are black oxide coated stainless steel . Internal fasteners are stainless steel or zinc electroplated steel .
ELECTRICAL - A terminal block for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), 347VAC and 480VAC . Optional button-type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified) . Fixture Watts: 350mA - 75, 450mA - 98 nominal .
DRIVER - Available in 350mA and 450mA drive currents (Drive currents are factory programmed) . State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
MOUNTING - Post Top, Side Arm and Wall mounting available . Pole selection information shown under fixture drawings .
FINISH - Fixtures are finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard colors include bronze, black, platinum plus, graphite, satin verde green, metallic silver and white .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED ENTERPRISE DECORATIVE AREA LIGHTS (XENM3)US patent 782456 and US & Int’l. patents pending
Also available in traditional light sources
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet locationARRAFunding Compliant
IP65
Type 2 Type 3 Type FT Type 5350 mA
450 mA
350 mA
450 mA
Cool
Whi
te
LIGHT OUTPUT - XENM3Lumens (Nominal)ARM MOUNT
# of LEDS55006300
49005600
57006400
45005100
6363
Neut
ral
Whi
teCo
olW
hite
Neut
ral
Whi
te
53006100
47005400
55006100
43004900
6363
Type 2 Type 3 Type FT Type 5350 mA
450 mA
350 mA
450 mA
Lumens (Nominal)POST TOP MOUNT# of LEDS
50006100
42005300
51006300
41005000
6363
48005900
40005100
49006000
40004800
6363
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
61
AR
EA
/ P
OL
ES
LED ENTERPRISE DECORATIVE AREA LIGHTS (XENM3)
TYPICAL ORDER EXAMPLE:
MountingStyle
# ofLEDs
LUMINAIRE ORDERING INFORMATION
Options
PT - Post Top SA4 - Side Arm
Mount for 4”Poles1
SA5 - Side ArmMount for 5”Poles1
BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteSVG - Satin Verde
GreenGPT - GraphiteMSV - Metallic Silver
FOOTNOTES:1- For correct mounting, order poles with 3” reduced drilling pattern.2- For PT mounting configurations other than D180, consult factory. Order one bracket per fixture.
XENM3 PT 5 LED 63 450 CW UE MSV PCI120
DriveCurrent
350 - 350 mA450 - 450 mA
Accessories
Button Type Photocells PCI120 - 120vPCHV208-277 - 208-277vPCI347 - 347vTE - Tool-less Entry
SPA - Square Pole Adaptor (SA only)WM - Wall Mount (PT only)SAWM - Side Arm Wall Mount (SA4 or SA5)BK MPT BO4 - Medium Bolt on Bracket (for PT 180) For 4” Dia. Round Poles1,2
BK MPT BO5 - Medium Bolt on Bracket (for PT 180) For 5” Dia. Round Poles1,2
UE - UniversalElectronic
(120-277V 50/60Hz)
347-480
63 CW- Cool White(5800oK nom.)
NW- Neutral White(4000oK nom.)
LightSource
LEDXENM3 2 - Type II3 - Type IIIFT - Forward
Throw5 - Type V
Prefix Input Voltage FinishColor
TemperatureDistribution
Ø4” (102mm) or Ø5” (127mm)24-1/2”
(622mm)
Ø4”(102mm)
35-1/2”(902mm)
Post Top with BK MPT BO (x2)Mounts to 4” or 5” Dia. D180 Bolt-on Pole(select 3” reduced drilling pattern)
Ø4”(102mm)
Ø25-1/4”(648mm)
Ø25-1/4”(648mm)
35-1/2”(902mm)
Post Top with WM Accessory
24-5/8”(625mm)
3-1/3”(84mm)
3-1/3”(84mm)
PT
PT
SA
SA
SA
SA
SA
SA
1.0
2.0
1.0
2.1
1.8
2.7
2.8
3.5
LUMINAIRE EPA CHART - Crossover EnterpriseMOUNTING STYLE
PT Single
PT D180°
Single
D180°
D90°
T90°
T120°
Q90°
7”(177mm)
7” (177mm)8-1/8”
(206mm) 4-1/4” (107mm)
Post TopSlipfits 4” Dia. Tenon (4N) or Pole
31-3/16”(792mm)
Ø25-1/2”(648mm)
Ø5” (127mm)
13-7/16”(341mm)
R2”(52mm)
25”(634mm)
37-3/4” (958mm)
Ø25-1/2”(648mm)
19-3/8”(492mm)
Side Arm Pole Mount(select 3” reduced drilling pattern)
SHIPPING WEIGHTS - Crossover EnterpriseCatalog Number Est. Weight (kg/lbs.)XENM3 (PT or SA) 29/64
with BK MPT BO (2)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
62
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in the driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5800oK nominal) or Neutral White (4000oK nominal) color temperature, 70CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types 2, 3, FT, and 5 . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - Modular fixture is available in two mounting styles - Post Top and Side Mount . One piece housing/support frame is die-cast aluminum . Combination mounting arm/driver enclosure on side mount versions is die-cast with integral ribs for heat dissipation . Access cover and support arms for post top versions are die-cast aluminum .
HOUSING TOP CAP - Removable spun aluminum cap/post top driver enclosure is retained by captive stainless steel fasteners and safety cables . Housing and top cap interface is sealed with a one-piece extruded silicone gasket . Tool-less entry option is available .
SEALED OPTICAL UNIT - Lens is clear, flat tempered glass, sealed to aluminum optics housing . Pressure stabilizing breather allows super-tight protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals and components .
FASTENERS - All exposed fasteners are black oxide coated stainless steel . Internal fasteners are stainless steel or zinc electroplated steel .
ELECTRICAL - Terminal block for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), 347VAC and 480VAC . Optional button-type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified) . Fixture Watts: 350mA - 75, 450mA - 98 nominal .
DRIVER - Available in 350mA and 450mA drive currents (Drive currents are factory programmed) . State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
MOUNTING - Post Top, Side Arm and Wall mounting available . Pole selection information shown under fixture drawings .
FINISH - Fixtures are finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard colors include bronze, black, platinum plus, graphite, satin verde green, metallic silver and white .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED INTREPID DECORATIVE AREA LIGHTS (XINM3)US patent 782456 and US & Int’l. patents pending
Also available in traditional light sources
Type 2 Type 3 Type FT Type 5 350 mA
450 mA
350 mA450 mA
Cool
Whi
te
LIGHT OUTPUT - XINM3Lumens (Nominal)ARM MOUNT
# of LEDS55006300
49005600
57006400
45005100
6363
Neut
ral
Whi
teCo
olW
hite
Neut
ral
Whi
te
53006100
47005400
55006100
43004900
6363
Type 2 Type 3 Type FT Type 5
350 mA450 mA
350 mA450 mA
Lumens (Nominal)POST TOP MOUNT# of LEDS
50006100
42005300
51006300
41005000
6363
48005900
40005100
49006000
40004800
6363
DARK-SKY FRIENDLY
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet locationARRAFunding Compliant
IP65
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
63
AR
EA
/ P
OL
ES
LED INTREPID DECORATIVE AREA LIGHTS (XINM3)
TYPICAL ORDER EXAMPLE:
PrefixMounting
Style# of
LEDs
LUMINAIRE ORDERING INFORMATION
Input Voltage Finish Options
PT - Post Top SA4 - Side Arm
Mount for 4”Poles1
SA5 - Side ArmMount for 5”Poles1
BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteSVG - Satin Verde
GreenGPT - GraphiteMSV - Metallic Silver
FOOTNOTES:1- For correct mounting, order poles with 3” reduced drilling pattern.2- For PT mounting configurations other than D180, consult factory. Order one bracket per fixture.
XINM3 PT 5 LED 63 450 CW UE MSV PCI120
Accessories
Button Type Photocells PCI 120 - 120vPCHV208-277 - 208-277vPCI 347 - 347vTE - Tool-less Entry
SPA - Square Pole Adaptor (SA only)WM - Wall Mount (PT only)SAWM - Side Arm Wall Mount (SA4 or SA5)BK MPT BO4 - Medium Bolt on Bracket (for PT 180)
For 4” Dia. Round Poles1,2
BK MPT BO5 - Medium Bolt on Bracket (for PT 180) For 5” Dia. Round Poles1,2
UE - UniversalElectronic
(120-277V 50/60Hz)
347-480
63 CW- Cool White(5800oK nom.)
NW- Neutral White(4000oK nom.)
LightSource Color Temperature
LEDXINM3
Distribution
2 - Type II3 - Type IIIFT - Forward
Throw5 - Type V
350 - 350mA450 - 450mA
Drive Current
PT
PT
SA
SA
SA
SA
SA
SA
1.2
2.5
1.3
2.5
2.2
3.4
3.4
4.0
LUMINAIRE EPA CHART - Crossover IntrepidMOUNTING
STYLE
PT Single
PT D180°
Single
D180°
D90°
T90°
T120°
Q90°
40”(1018mm)
Post Top with WM Accessory
24-5/8”(625mm)
3-1/3”(84mm)
Ø25-1/2”(648mm)
Ø4”(102mm)
40”(1018mm)
Ø25-1/2”(648mm)
Ø4” (102mm) or Ø5” (127mm)
3-1/3”(84mm)
Ø4”(102mm)
24-1/2”(521mm)
Ø25-1/2”(648mm)Ø25-1/2”
(5648mm)
Ø5” (127mm)
37-3/4” (958mm)
25”(634mm)
R2”(52mm)
4-1/4” (107mm)
11-1/2”(291mm)
13-1/2”(341mm)
8-1/8”(206mm)
35-11/16(906mm)
11-1/2”(292mm)
19-3/8”(492mm)
SHIPPING WEIGHTS - Crossover IntrepidCatalog Number Est. Weight (kg/lbs.)XINM3 (PT or SA) 29/64
Post Top with BK MPT BO (x2)Mounts to 4” or 5” Dia. D180 Bolt-on Pole(select 3” reduced drilling pattern)
Post TopSlipfits 4” Dia. Tenon (4N) or PoleSide Arm Pole Mount
(select 3” reduced drilling pattern)
with BK MPT BO (2)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
64
AR
EA
/ P
OL
ES
SMARTTEC™ THERMAL CONTROL - Sensors in the driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5800oK nominal) or Neutral White (4000oK nominal) color temperature, 70CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Types 2, 3, FT, and 5 . Exceptional uniformity creates bright environment at lower light levels . Improved backlight cutoff minimizes light trespass .
HOUSING - One piece housing/support frame is die-cast aluminum . Post top access cover and support arms are die-cast aluminum . Housing is sealed with an extruded silicone gasket .
HOUSING TOP CAP - Removable spun aluminum cap/driver enclosure is retained by captive stainless steel fasteners and safety cables . Housing and top cap interface is sealed with a one-piece extruded silicone gasket . Tool-less entry option is available .
SEALED OPTICAL UNIT - Lens is clear, flat tempered glass, sealed to aluminum optics housing . Pressure stabilizing breather allows super-tight protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals and components .
FASTENERS - All exposed fasteners are black oxide coated stainless steel . Internal fasteners are stainless steel or zinc electroplated steel .
ELECTRICAL - Terminal block for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), 347VAC and 480VAC . Optional button-type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified) . Fixture Watts: 350mA - 75, 450mA - 98 nominal .
DRIVER - Available in 350mA and 450mA drive currents (Drive currents are factory programmed) . State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
MOUNTING - Post Top and Wall mounting available . Pole selection information shown under fixture drawings .
FINISH - Fixtures are finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard colors include bronze, black, platinum plus, graphite, satin verde green, metallic silver and white .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations .
LED LEXINGTON DECORATIVE AREA LIGHTS (XLXM3)US patent 782456 and US & Int’l. patents pending
Also available in traditional light sources
Type 2 Type 3 Type FT Type 5350 mA
450 mA
350 mA
450 mA
Cool
Whi
te
LIGHT OUTPUT - XLXM3Lumens (Nominal)
# of LEDS50006100
42005300
51006300
41005000
6363
Neut
ral W
hite 4800
590040005100
49006000
40004800
6363
POST TOP MOUNT
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet locationARRAFunding Compliant
IP65
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
65
AR
EA
/ P
OL
ES
LED LEXINGTON DECORATIVE AREA LIGHTS (XLXM3)
TYPICAL ORDER EXAMPLE:
PrefixMounting
Style# of
LEDs
LUMINAIRE ORDERING INFORMATION
Input Voltage Finish Options
PT - Post Top BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteSVG - Satin Verde
GreenGPT - GraphiteMSV - Metallic Silver
FOOTNOTES:1- Order poles with 3" reduced drilling pattern. For PT mounting configurations other than D180, consult factory. Order one bracket per fixture.
XLXM3 PT 5 LED 63 450 CW UE MSV PCI120
Accessories
Button Type Photocells PCI 120 - 120vPCHV208-277 - 208-277vPCI 347 - 347vTE - Tool-less Entry
WM - Wall MountBK MPT BO4 - Medium Bolt on Bracket (for PT 180)
For 4” Dia. Round Poles1
BK MPT BO5 - Medium Bolt on Bracket (for PT 180) For 5” Dia. Round Poles1
UE - UniversalElectronic
(120-277V 50/60Hz)
347-480
63
Distribution
2 - Type II3 - Type IIIFT - Forward
Throw5 - Type V
CW- Cool White(5800oK nom.)
NW- Neutral White(4000oK nom.)
LightSource Color Temperature
LEDXLXM3 350 - 350mA450 - 450mA
Drive Current
46-5/8”(1184mm)
Ø4”(102mm)
24-5/8”(625mm)
Post Top with WM Accessory
3-1/3”(84mm)
Ø25-1/2”(648mm)
PT
PT
1.4
2.7
LUMINAIRE EPA CHART - Crossover Lexington
MOUNTING STYLE
PT Single
PT D180°
Ø4” (102mm) or Ø5” (127mm)
24-1/2”(622mm)
Ø4”(102mm)
Post Top with BK MPT BO (x2)Mounts to 4” or 5” Dia. D180 Bolt-on Pole
(select 3” reduced drilling pattern)
3-1/3”(84mm)
46-5/8”(1184mm)
Ø25-1/2”(648mm)
18”(457mm)
Post Top SingleSlipfits 4” Dia. Tenon (4N) or Pole
42-1/4”(1072mm)
Ø25-1/2”
Ø5” (127mm)
19-3/8”(492mm)
SHIPPING WEIGHTS - Crossover LexingtonCatalog Number Est. Weight (kg/lbs.)XLXM3 (PT) 29/64
with BK MPT BO (2)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
66
AR
EA
/ P
OL
ES
STEEL ROUND POLES
ARRAFunding Compliant
POLE SHAFT - Pole shaft is electro-welded ASTM-A500 Grade C steel tubing with a minimum yield strength of 46,000 psi. On Tenon Mount steel poles, tenon is high-strength pipe. Tenon N option is 2-3/8” O.D. x 4-3/4” tall. Tenon 4N option is 4” O.D. x 4-7/8” tall. Steel round poles are 4” and 5” in diameter.
HAND-HOLE - Standard hand-hole location is 12” above pole base. Poles 18’ and above have a 3” x 6” reinforced hand-hole. Shorter poles have 2” x 4” non-reinforced hand-hole.
BASE - Pole base is ASTM-A36 hot-rolled steel plate with a minimum yield strength of 36,000 psi. Two-piece square base cover is optional.
BASE COVERS- Optional two-piece decorative die-cast aluminum (GBC) base covers or square two-piece aluminum base covers are available.
ANCHOR BOLTS - Poles are furnished with anchor bolts featuring zinc-plated double nuts and washers. Galvanized anchor bolts are optional. Anchor bolts conform to ASTM F 1554-07a Grade 55 with a minimum yield strength of 55,000 psi.
GROUND LUG - Ground lug is standard.
DUPLEX RECEPTACLE - Weatherproof duplex receptacle is optional.
GROUND FAULT CIRCUIT INTERRUPTER - Ground fault circuit interrupter is optional.
FINISHES - Each pole is finished with DuraGrip®, LSI’s baked-on polyester-powder finishing process which electrostatically applies and fuses a polyester powder to the pole. Provides an extremely smooth and uniform finish to withstand extreme weather changes without cracking or peeling, and features a five-year limited warranty. Optional DuraGrip® Plus features the added protection of a 3.0 to 5.0 mil thickness of polyester-powder finish plus an inner coating, as well as a seven-year limited warranty.
DETERMINING THE LUMINAIRE/POLE COMBINATION FOR YOUR APPLICATION:
• Select luminaire from luminaire ordering information
• Select bracket configuration if required
• Determine EPA value from luminaire/bracket EPA chart
• Select pole height
• Select MPH to match wind speed in the application area (See windspeed map).
• Confirm pole EPA equal to or exceeding value from note above
• Consult factory for special wind load requirements and banner brackets
DIMENSIONS
SHIPPING WEIGHTS - Steel Round Poles
DRILLING LOCATIONS
Projection
10'-30'(5.5m - 9.1m)
(4)AnchorBolts
FoundationBy Other
OptionalBase Cover
RPN –N= 2-3/8"(60mm) O.D. x 4-3/4"(121mm) Tall Tenon4N= 4"(102mm) O.D. x 4-7/8"(124mm) Tall Tenon
Hand-hole
12"(305mm)Standard
RPB3, RPB5 –Bolt-On Mount,2-Bolt Pattern
RPP –Round Pole Top
SF –Single Flood
Pole Preparation
Side “B”Side “D”
Side “C”
Sides
Side “A” (Hand-hole Side)
A B C DHand-hole XSingle XD180° X XD90° X XT90° X X XTN120°* XQ90° X X X XSingle FBO XDouble FBO X X*Other two locations will be 120° to the left and right of Side A.Note: Consult factory for custom variations. Standard SF and DF pole
preparations are located 3/4 of the height of the pole from the base, unless otherwise specified.
4"(102mm) Dia. 10 Ga. is approximately 6.0 lbs./ft. 5"(127mm) Dia. 11 Ga. is approximately 7.0 lbs./ft.5"(127mm) Dia. 07 Ga. is approximately 10.0 lbs./ft.Anchor Bolts (3/4” x 30”)(19mm x 762mm) 15 lbs.(7kg)/setAnchor Bolts (1” x 36”)(125mm x 914mm) 30 lbs.(14kg)/set
OutsideDimensions
Height
EPA based on ANSI/ASCE 7-93. Refer to EPA information on next page. For applications in Canada and areas using code requirements other than ANSI/ASCE 7-93 and for banner brackets, consult factory. If luminaire weight exceeds 250 lbs. (113.4 kg), consult factory.
MaterialEPA80 MPH 90 MPH 100 MPH
BoltCircle70 MPH
10' (3.0m)12' (3.7m)14' (4.3m)16' (4.9m)16' (4.9m)16' (4.9m)18' (5.5m)18' (5.5m)18' (5.5m)20' (6.1m)20' (6.1m)20' (6.1m)22' (6.7m)22' (6.7m)22' (6.7m)24' (7.3m)24' (7.3m)24' (7.3m)26' (7.9m)26' (7.9m)28' (8.5m)30' (9.1m)
4" (102mm)4" (102mm)4" (102mm)4" (102mm)5" (127mm)5" (127mm)4" (102mm)5" (127mm)5" (127mm)4" (102mm)5" (127mm)5" (127mm)4" (102mm)5" (127mm)5" (127mm)4" (102mm)5" (127mm)5" (127mm)5" (127mm)5" (127mm)5" (127mm)5" (127mm)
18.514.611.79.918.632.215.524.237.512.520.031.710.016.626.97.813.622.911.119.516.513.8
10.68.06.14.99.8
17.08.0
12.920.96.1
10.217.34.48.0
14.23.06.0
11.64.39.47.45.6
8.26.14.53.47.3
12.65.89.6
16.14.27.4
13.12.85.5
10.51.53.88.32.36.44.73.2
LLLLLMLLMLLMLLMLLMLMMM
13.810.78.46.913.423.211.117.527.78.714.223.16.711.519.44.99.116.27.113.511.18.9
S10GS10GS10GS10GS11GS07GS10GS11GS07GS10GS11GS07GS10GS11GS07GS10GS11GS07GS11GS07GS07GS07G
POLE SELECTION CHART: 4" (102mm) and 5" (127mm) steel round poles
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
67
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
Pole Series MaterialMounting
Configuration
POLE ORDERING INFORMATION
Height 5
ACCESSORY ORDERING INFORMATIONDescription Order Number Description Order Number
(Accessories are field installed)
GFI – Ground Fault Circuit Interrupter for Reinforced Hand-hole (Poles 18' and above)MHD – Mounting Hole Weatherproof DecalBB - Banner BracketsPMOS120 - 120V Occupancy SensorPMOS208/240 - 208, 240V Occupancy SensorPMOS277 - 277V Occupancy Sensor
122567CLR340120
518030CLR8
C/F8
518029CLR8
PoleFinish Options
BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteSVG - Satin Verde GreenGPT - GraphiteMSV - Metallic Silver
S – Single/ParallelD180° – DoubleD90°– DoubleDN90°– DoubleT90°– TripleTN120°– TripleQ90°– Quad
PT – Pole Top Mount
N – Tenon Mount4N – Tenon Mount (Available with 5RPN only. For 4”
poles, use 4RPSF below)3
*
10’12’14’16’18'20'22'24'26'28'30'
S11G – 11 Ga. SteelS10G – 10 Ga. Steel 4S07G – 07 Ga. Steel
Bolt-On Mount1 - See pole selection guide for patterns and fixture matches.4RPB3 - 3" Reduced Drilling Pattern5RPB3 - 3" Reduced Drilling Pattern4RPB5 - 5" Traditional Drilling Pattern5RPB5 - 5" Traditional Drilling Pattern
Pole Top Mount2 - Use with:• Greenbriar Pole Top • Hilton Pole Top
4RPP5RPP
Tenon Mount - See pole selection guide for tenon and fixture/bracket matches.4RPN5RPN
Greenlee Slipfit - Use with: • Greenlee Lifestyle CC, SC & CH mounting styles• Enterprise, Intrepid & Lexington PT Single mounting styles3
4RPSF
Greenlee Universal Bracket1 (No Drilling) - Use with:• Lifestyle UCLS • Lifestyle UCLD180
4RPI5RPI
GA – Galvanized Anchor BoltsSF – Single Flood 6
DF – Double Flood 6
DGP – DuraGrip® PlusLAB – Less Anchor BoltsOSXX - Pole preparation for PMOS Occupancy Sensor7
FOOTNOTES:1 - Standard flat black pole cap provided. Domed Greenlee pole cap will ship with SA4 and SA5 Enterprise, Intrepid and
Lexington fixtures, SA Lifestyle fixtures, BK SPT BO, BK MPT BO and UCL brackets.2 - For Enterprise, Intrepid and Lexington PT mounting configuration styles, see Tenon Mount (4N) and Greenlee Slipfit Pole Series (4RPSF). 3 - For Enterprise, Intrepid and Lexington D180 or other mounting configuration styles using BK SPT BO and BK MPT BO accessories, see chart on Bolt-on Mount 4RPB3 / 5RPB3 DRILLING PATTERN section on pole selection chart. 4 - 4" poles are available in S10G only. 5" poles available in S11G and S07G only.
5RPB5 S07G 24 S PLP SF DGP
4" SRBC Square Base Cover5" SRBC Square Base Cover4" /5” GBC Decorative Base CoverER2 – Weatherproof Duplex Receptacle (Poles below 18’)ER2 – Weatherproof Duplex Receptacle for Reinforced Hand-hole (Poles 18' and above)GFI – Ground Fault Circuit Interrupter (Poles below 18’)
158450CLR158451CLR483859CLR122557CLR
122566CLR122558CLR
BOLT CIRCLE EPA INFORMATION
All LSI Industries’ poles are guaranteed to meet the EPA requirements listed. LSI Industries is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the pole will be located. CAUTION: This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole. LSI Industries cannot accept responsibility for harm or damage caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind velocity. Example: poles designed to withstand 80 MPH steady wind will withstand gusts to 104 MPH. EPAs are for locations 100 miles away from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal areas. For applications in Florida or Canada, consult factory.
Standard SF and DF pole preparations are located 3/4 of the height of the pole from the base, unless otherwise specified. Consult Pole Selection
Chart on opposite page
Bolt Circle
Anchor Bolt Size
Anchor Bolt Projection
Base Plate Opening for Wireway Entry
Base Plate Dimensions
L
Slotted11" (279mm)
3/4" x 30"(19mm x 762mm)
3-1/4"(83mm)
3-5/8"(92mm)
10-1/8" sq. x 3/4" thk.(257mm x 19mm)
3/4" x 30"(19mm x 762mm)
3-1/4"(83mm)
4-3/4"(121mm)
10-1/8" sq. x 3/4" thk.(257mm x 19mm)
1" x 36"(25mm x 914mm)
4"(102mm)
4-5/8"(117mm)
10-1/8" sq. x 1" thk.(257mm x 25mm)
M
Slotted11" (279mm)
Note: Base plate illustrations may change without notice. Do not use for setting anchor bolts. Consult factory for the base plate templates.
L
4" (102mm) Round 5" (127mm) Round5" (127mm) Round
Slotted11" (279mm)
10-1/8" (257mm) sq. 10-1/8" (257mm) sq. 10-1/8" (257mm) sq.
11" (279mm) Dia. Bolt Circle11" (279mm) Dia. Bolt Circle11" (279mm) Dia. Bolt Circle
5 - Pole heights will have +/- 1/2" tolerance.6- See Flood Lighting Brackets section for choice of FBO brackets.7 - Order PMOS separately. Change “XX” to indicate height and side of pole location for pole preparation. EX: OS8A indicates preparation is to be 8ft. up
from pole base on side A. Optimal distance from ground to sensor is 10ft.8 - OSXX option required.
Consult Factory for EPA calculations
STEEL ROUND POLES
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
68
AR
EA
/ P
OL
ES
STEEL SQUARE POLES
ARRAFunding Compliant
POLE SHAFT - Pole shaft is electro-welded ASTM-A500 Grade C steel tubing with a minimum yield strength of 50,000 psi. On Tenon Mount steel poles, tenon is 2-3/8” O.D. high-strength pipe. Tenon is 4-3/4” in length. Straight poles are 4”, 5”, and 6” square.
HAND-HOLE - Standard hand-hole location is 12” above pole base. Poles 22’ and above have a 3” x 6” reinforced hand-hole. Shorter poles have a 2” x 4” non-reinforced hand-hole.
BASE - Pole base is ASTM-A36 hot-rolled steel plate with a minimum yield strength of 36,000 psi. Two-piece square base cover is optional.
ANCHOR BOLTS - Poles are furnished with anchor bolts featuring zinc-plated double nuts and washers. Galvanized anchor bolts are optional. Anchor bolts conform to ASTM F 1554-07a Grade 55 with a minimum yield strength of 55,000 psi.
GROUND LUG - Ground lug is standard.
DUPLEX RECEPTACLE - Weatherproof duplex receptacle is optional.
GROUND FAULT CIRCUIT INTERRUPTER - Ground fault circuit interrupter is optional.
FINISHES - Each pole is finished with DuraGrip®, LSI’s baked-on polyester-powder finishing process which electrostatically applies and fuses a polyester powder to the pole. Provides an extremely smooth and uniform finish to withstand extreme weather changes without cracking or peeling, and features a five-year limited warranty. Optional DuraGrip® Plus features the added protection of a 3.0 to 5.0 mil thickness of polyester-powder finish plus an inner coating, as well as a seven-year limited warranty.
DETERMINING THE LUMINAIRE/POLE COMBINATION FOR YOUR APPLICATION:
• Select luminaire from luminaire ordering information
• Select bracket configuration if required
• Determine EPA value from luminaire/bracket EPA chart
• Select pole height
• Select MPH to match wind speed in the application area (See windspeed map).
• Confirm pole EPA equal to or exceeding value from note above
• Consult factory for special wind load requirements and banner brackets
DIMENSIONS
SHIPPING WEIGHTS - Steel Square Poles
DRILLING LOCATIONS
Projection
14'-39'(4.3m - 11.9m)
(4)AnchorBolts
FoundationBy Other
OptionalBase Cover
SQN –N= 2-3/8" (60mm) O.D. x 4-3/4" (121mm) Tenon
Hand-hole
12"(305mm)Standard
Side “B”Side “D”
Side “A” (Hand-hole Side)
Side “C”
Sides A B C DHand-hole XSingle XD180° X XD90° X XT90° X X XTN120°* XQ90° X X X XSingle FBO XDouble FBO X X*Other two locations will be 120° to the left and right of Side A.
Note: Standard SF and DF pole preparations are located 3/4 of the height of the pole from the base, unless otherwise specified.
4”(102mm) sq. 11 Ga. is approximately 7.50 lbs./ft.4”(102mm) sq. 07 Ga. is approximately 10.00 lbs./ft.5”(127mm) sq. 11 Ga. is approximately 9.00 lbs./ft.5”(127mm) sq. 07 Ga. is approximately 12.50 lbs./ft.6”(152mm) sq. 07 Ga. is approximately 15.40 lbs./ft.Anchor Bolts (3/4” x 30”)(19mm x 762mm) 15 lbs. (7kg)/setAnchor Bolts (1” x 36”)(25mm x 914mm) 30 lbs. (14kg)/set
SQB3, SQB5 –Bolt-On Mount2-Bolt Pattern
SQP –Square Pole Top
SQI –No Mounting Holes
SF –Single Flood
Pole Preparation
OutsideDimensions
MaterialHeight EPA 80 MPH 90 MPH 100 MPH
BoltCircle70 MPH
14' (4.3m)16' (4.9m)16' (4.9m)18' (5.5m)18' (5.5m)20' (6.1m)20' (6.1m)20' (6.1m)20' (6.1m)22' (6.7m)22' (6.7m)22' (6.7m)22' (6.7m)24' (7.3m)24' (7.3m)24' (7.3m)24' (7.3m)24' (7.3m)26' (7.9m)26' (7.9m)26' (7.9m)26' (7.9m)26' (7.9m)28' (8.5m)28' (8.5m)30' (9.1m)30' (9.1m)35' (10.7m)39' (11.9m)
4" (102mm)4" (102mm)5" (127mm)4" (102mm)5" (127mm)4" (102mm)4" (102mm)5" (127mm)5" (127mm)4" (102mm)4" (102mm)5" (127mm)5" (127mm)4" (102mm)4" (102mm)5" (127mm)5" (127mm)6" (153mm)4" (102mm)4" (102mm)5" (127mm)5" (127mm)6" (152mm)5" (127mm)6" (152mm)5" (127mm)6" (152mm)6" (152mm)6" (152mm)
23.318.634.614.427.911.018.722.535.510.418.720.834.0
7.715.116.728.646.2
5.312.013.224.039.619.933.916.328.818.311.5
12.29.3
18.56.5
14.14.28.8
10.518.4
3.48.48.9
17.01.56.06.2
13.423.2
—3.93.8
10.318.9
7.515.1
5.011.6
4.3—
9.06.5
13.84.2
10.12.25.97.0
13.41.45.45.5
12.0—
3.33.18.9
16.6—
1.51.06.3
12.93.99.61.76.6——
BBCBCBBCDBBCDBBCDJBBCDJDJDJJJ
16.713.125.0
9.719.7
7.012.815.425.4
6.312.613.823.9
4.09.7
10.519.632.6
2.17.27.6
15.827.312.522.7
9.618.610.0
4.3
S11GS11GS11GS11GS11GS11GS07GS11GS07GS11GS07GS11GS07GS11GS07GS11GS07GS07GS11GS07GS11GS07GS07GS07GS07GS07GS07GS07GS07G
POLE SELECTION CHART: 4"(102mm), 5"(127mm) and 6"(152mm) steel square poles
EPA based on ANSI/ASCE 7-93. Refer to EPA information on next page. For applications in Canada and areas using code requirements other than ANSI/ASCE 7-93, consult factory. If luminaire weight exceeds 250 lbs. (113.4 kg), consult factory.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
69
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
PoleSeries Material
MountingConfiguration
POLE ORDERING INFORMATION
Height2
ACCESSORY ORDERING INFORMATIONOrder Number Description Order Number
(Accessories are field installed)
172539172538178361
518030CLR5
C/F5
518029CLR5
Vibration Damper - 4" Square Pole (bolt-on mount only)Vibration Damper - 5" Square Pole (bolt-on mount only)Vibration Damper - 6" Square Pole (bolt-on mount only)PMOS120 - 120V Occupancy SensorPMOS208/240 - 208, 240V Occupancy SensorPMOS277 - 277V Occupancy Sensor
PoleFinish Options
BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteSVG - Satin Verde GreenGPT - GraphiteMSV - Metallic Silver
S – Single/ParallelD180° – DoubleD90°– DoubleDN90°– DoubleT90°– TripleTN120°– TripleQ90°– QuadQN90°– Quad
PT – Pole Top Mount
N – Tenon Mount(Standard tenon size is 2-3/8" O.D.)
*
14'16'18'20'22'24'26'28'30'35'39'
S11G – 11 Ga. SteelS07G – 07 Ga. Steel
GA – Galvanized Anchor BoltsSF – Single Flood3
DF – Double Flood3
DGP – DuraGrip® PlusLAB – Less Anchor BoltsOSXX - Pole preparation for PMOS Occupancy Sensor4
FOOTNOTES:1 - See Area Lighting Brackets - Bolt-on and XAS3/XAM3 Area Lighting Brackets pages for Internal Slip-fitter brackets. 2 - Pole heights will have +/- 1/2" tolerance. 3 - See Flood Lighting Brackets section for choice of FBO brackets.
5SQB5 S07G 24 S PLP SF DGP
4BC – 4" Square Base Cover5BC – 5" Square Base Cover6BC – 6" Square Base CoverER2 – Weatherproof Duplex Receptacle GFI – Ground Fault Circuit InterrupterMHP – Mounting Hole Plugs (3 plugs)
122559CLR122561CLR122563CLR122566CLR122567CLR
132336
BOLT CIRCLE EPA INFORMATION
All LSI Industries’ poles are guaranteed to meet the EPA requirements listed. LSI Industries is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the pole will be located. CAUTION: This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole. LSI Industries cannot accept responsibility for harm or damage caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind velocity. Example: poles designed to withstand 80 MPH steady wind will withstand gusts to 104 MPH. EPAs are for locations 100 miles away from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal areas. For applications in Florida or Canada, consult factory.
Standard SF and DF pole preparations are located 3/4 of the height of the pole from the base, unless otherwise specified.
Consult Pole SelectionChart on opposite page
Bolt CircleAnchor Bolt Size
Anchor Bolt Projection
Base Plate Opening for Wireway Entry
Base Plate Dimensions
B JD
Note: Base plate illustrations may change without notice. Do not use for setting anchor bolts. Consult factory for the base plate templates.
C
4" (102mm) square 5" (127mm) square 5" (127mm) square 6" (152mm) square
Slotted8”-11" (203mm-279mm)
3/4" x 30"(19mm x 762mm)
3-1/4"(83mm)
3-5/8"(92mm)
10-1/8" sq. x 3/4" thk.(257mm x 19mm)
3/4" x 30"(19mm x 762mm)
3-1/4"(83mm)
4-3/4"(121mm)
10-1/8" sq. x 3/4" thk.(257mm x 19mm)
1" x 36"(25mm x 914mm)
4"(102mm)
4-5/8"(117mm)
10-1/8" sq. x 1" thk.(257mm x 25mm)
Slotted9”-11" (229mm-279mm)
1" x 36"(25mm x 914mm)
4"(102mm)
5-5/8"(143mm)
12" sq. x 1-1/8" thk.(305mm x 29mm)
Slotted12" (305mm)
Slotted9”-11" (229mm-279mm)
10-1/8" (257mm) sq. 10-1/8" (257mm) sq. 10-1/8" (257mm) sq. 12" (305mm) sq.
11" (279mm) Dia. Bolt Circle12" (305mm) Dia. Bolt Circle
11" (279mm) Dia. Bolt Circle11" (279mm) Dia. Bolt Circle
Bolt-on Arm Mount - See pole selection guide for patterns and fixture matches.4SQB3 - 3” Reduced drilling pattern5SQB3 - 3” Reduced drilling pattern4SQB5 - 5” Traditional drilling pattern5SQB5 - 5” Traditional drilling pattern6SQB5 - 5” Traditional drilling pattern
Pole Top Mount - Use with: • Greenbriar Pole Top • Hilton Pole Top
4SQP5SQP6SQP
Tenon Mount - See pole selection guide for tenon and fixture/bracket matches.4SQN5SQN6SQN
No Mounting Holes or Pole Caps - Use with:• BKA 4ISF & BKA 5ISF • BKA X4ISF & BKA X5ISF
Internal Slip-fitter1
4SQI5SQI
4 - Order PMOS separately. Change “XX” to indicate height and side of pole location for pole preparation. EX: OS8A indicates preparation is to be 8ft. up from pole base on side A. Optimal distance from ground to sensor is 10ft.
5 - OSXX option required.
STEEL SQUARE POLES
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
70
AR
EA
/ P
OL
ES
STEEL ROUND TAPERED POLES
POLE SHAFT - Pole shaft is electro-welded ASTM-A595 Grade A steel tubing with a minimum yield strength of 55,000 psi. On Tenon Mount steel poles, tenon is 2-3/8” O.D. high-strength pipe. Tenon is 4-3/4” in length.
HAND-HOLE - Standard hand-hole location is 12” above pole base. Hand-hole size is 4” x 6” and reinforced.
BASE - Pole base is ASTM-A36 hot-rolled steel plate with a minimum yield strength of 36,000 psi. Two-piece square base cover is optional.
ANCHOR BOLTS - Poles are furnished with anchor bolts featuring zinc-plated double nuts and washers. Galvanized anchor bolts are optional. Anchor bolts conform to ASTM F 1554-07a Grade 55 with a minimum yield strength of 55,000 psi.
GROUND LUG - Ground lug is standard.
DUPLEX RECEPTACLE - Weatherproof duplex receptacle is optional.
GROUND FAULT CIRCUIT INTERRUPTER - Ground fault circuit interrupter is optional.
FINISHES - Each pole is finished with DuraGrip®, LSI’s baked-on polyester-powder finishing process which electrostatically applies and fuses a polyester powder to the pole. Provides an extremely smooth and uniform finish to withstand extreme weather changes without cracking or peeling, and features a five-year limited warranty. Optional DuraGrip® Plus features the added protection of a 3.0 to 5.0 mil thickness of polyester-powder finish plus an inner coating, as well as a seven-year limited warranty.
DETERMINING THE LUMINAIRE/POLE COMBINATION FOR YOUR APPLICATION:
• Select luminaire from luminaire ordering information
• Select bracket configuration if required
• Determine EPA value from luminaire/bracket EPA chart
• Select pole height
• Select MPH to match wind speed in the application area (See windspeed map).
• Confirm pole EPA equal to or exceeding value from note above
• Consult factory for special wind load requirements and banner brackets
SHIPPING WEIGHTS - Round Steel Tapered Poles
DRILLING LOCATIONS
Side “B”Side “D”
Side “A” (Hand-hole Side)
Side “C”
Sides A B C DHand-hole XSingle XD180° X XD90° X XT90° X X XTN120°* XQ90° X X X XSingle FBO XDouble FBO X X*Other two locations will be 120° to the left and right of Side A.
Note: Standard SF and DF pole preparations are located 3/4 of the height of the pole from the base, except on 20' poles. Maximum height for SF and DF pole preparations on 20' poles is 13' from the base.
Proj
ectio
n
20'-39'(6.1m - 11.9m)
OptionalBase
Cover
Hand-hole
(4) Anchor BoltsFoundation By Other
12"(305mm)Standard
45'-50'(13.7m - 15.2m)
Two-PiecePole
TopShaft
BottomShaft
RTPB5 –Bolt-On Mount,2-Bolt Pattern
RTPP –Round
Pole Top
SF –Single Flood
Pole Preparation
Height Pole Bottom Pole Top20' (6.1m)25' (7.1m)30' (9.1m)
35' (10.7m)39' (11.9m)
TWO-PIECE SHAFT
ONE-PIECE SHAFT
5.80" (147mm)O.D.6.60" (168mm)O.D.7.50" (191mm)O.D.8.50" (216mm)O.D.9.00" (229mm)O.D.
3.0" (76mm)O.D.3.10" (79mm)O.D.3.30" (84mm)O.D.3.60" (91mm)O.D.3.54" (90mm)O.D.
HeightTop Shaft Bottom Shaft
Top Bottom45'
(13.7m)
50'(15.2m)
3.95" O.D.(100mm)
3.25" O.D.(83mm)
6.89" O.D.(175mm)
6.89" O.D.(175mm)
Length Top Bottom Length21'-0"(6.4m)
26'-0"(7.9m)
6.43" O.D.(163mm)
6.43" O.D.(163mm)
10.00" O.D.(254mm)
10.00" O.D.(254mm)
25'-6"(7.8m)
25'-6"(7.8m)
20' (6.1m) S11 Ga. is approximately 153 lbs. (69kg)25' (7.6m) S11 Ga. is approximately 196 lbs. (89kg)30' (9.1m) S11 Ga. is approximately 247 lbs. (112kg)35' (10.7m) S11 Ga. is approximately 319 lbs. (145kg)39' (11.9m) S11 Ga. is approximately 358 lbs. (162kg)39' (11.9m) S07 Ga. is approximately 529 lbs. (240kg)45'* (13.7m) S07 Ga. is approximately 622 lbs. (282kg)50’ (15.2m) S07 Ga. is approximately 646 lbs. (293kg)
DIMENSIONSONE-PIECE RTPN – TWO-PIECE RTPN –
N = 2-3/8" (60mm) O.D. x 4-3/4" (121mm) Tenon
Anchor Bolts (1” x 36”)(25mm x 914mm) 30 lbs. (14kg)/setAnchor Bolts (1-1/4” x 42”)(32mm x 1069mm) 63 lbs. (29kg)/set
Height MaterialEPA80 MPH 90 MPH 100 MPH
BoltCircle70 MPH
20' (6.1m) 25' (7.6m) 30' (9.1m)35' (10.7m)39' (11.9m)39' (11.9m)45'* (13.7m)50'* (15.2m)
33.631.430.730.127.151.142.328.9
18.817.016.014.912.627.124.015.6
14.412.811.710.5 8.420.218.611.7
NNNQQSTT
24.822.922.021.118.536.931.421.0
S11 Ga.S11 Ga.S11 Ga.S11 Ga.S11 Ga.S07 Ga.S07 Ga.S07 Ga.
POLE SELECTION CHART (steel round tapered poles)
* 45' and 50' poles are two-piece; bottom is S07G and top is S11G.
EPA based on ANSI/ASCE 7-93. Refer to EPA information on next page. For applications in Canada and areas using code requirements other than ANSI/ASCE 7-93, consult factory. If luminaire weight exceeds 250 lbs. (113.4 kg), consult factory.
ARRAFunding Compliant
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
71
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
PoleSeries Material
MountingConfiguration
POLE ORDERING INFORMATION
Height 1
ACCESSORY ORDERING INFORMATIONDescription Order Number Description Order Number
(Accessories are field installed)
158578CLR122568CLR122569CLR
340120518030CLR4
C/F4
518029CLR4
50 SRTBC Square Base CoverER2 – Weatherproof RTP Duplex ReceptacleGFI – Ground Fault RTP Circuit InterrupterMHD - Mounting Hole Weatherproof DecalPMOS120 - 120V Occupancy SensorPMOS208/240 - 208, 240V Occupancy SensorPMOS277 - 277V Occupancy Sensor
PoleFinish Options
BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteSVG - Satin Verde GreenGPT - GraphiteMSV - Metallic Silver
S – Single/ParallelD180° – DoubleD90°– DoubleDN90°– DoubleT90°– TripleTN120°– TripleQ90°– Quad
PT – Pole Top Mount
N – Tenon Mount(Standard tenon size is 2-3/8" O.D.)
20'25'30'35'39'45’50’
S11G – 11 Ga. SteelS07G – 07 Ga. Steel
Round Tapered Pole for Bolt-On Mount2-Bolt PatternRTPB5 - 5” Traditionaldrilling pattern
Round Tapered Polefor Pole Top MountRTPP
Round Tapered Pole for Tenon MountRTPN
GA – Galvanized Anchor BoltsSF – Single Flood 2DF – Double Flood 2DGP – DuraGrip® PlusLAB – Less Anchor BoltsOSXX - Pole preparation for PMOS Occupancy Sensor3
FOOTNOTES:1 - Pole heights will have +/- 1/2” tolerance.2- See Flood Lighting Brackets Section for choice of FBO brackets.
RTPB5 S11G 35 S PLP DGP
20 SRTBC Square Base Cover25 SRTBC Square Base Cover30 SRTBC Square Base Cover35 SRTBC Square Base Cover39 SRTBC Square Base Cover45 SRTBC Square Base Cover
158388CLR158390CLR158392CLR158554CLR155887CLR158571CLR
BOLT CIRCLE EPA INFORMATION
Bolt Circle
Anchor Bolt Size
Anchor Bolt Projection
Base Plate Dimensions
N T
Note: Base plate illustrations may change without notice. Do not use for setting anchor bolts. Consult factory for the base plate templates.
SQ
All LSI Industries’ poles are guaranteed to meet the EPA requirements listed. LSI Industries is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the pole will be located. CAUTION: This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole. LSI Industries cannot accept responsibility for harm or damage caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind velocity. Example: poles designed to withstand 80 MPH steady wind will withstand gusts to 104 MPH. EPAs are for locations 100 miles away from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal areas. For applications in Florida or Canada, consult factory.
Standard SF and DF pole preparations are located 3/4 of the height of the pole from the base, except on 20' poles. Maximum height for SF and DF pole preparations on 20' poles is 13' from the base.
10-1/8" (257mm) sq. 12" (305mm) sq. 12" (305mm) sq. 13-1/2" (343mm) sq.
14" (356mm) Dia.Bolt Circle
12" (305mm) Dia.Bolt Circle
12" (305mm) Dia.Bolt Circle
11" (279mm) Dia. Bolt Circle
1" x 36"(25mm x 914mm)
4"(102mm)
10-1/8" sq. x 1" thk.(257mm x 25mm)
Slotted11" (279mm)
1" x 36"(25mm x 914mm)
4"(102mm)
12" sq. x 1" thk.(305mm x 25mm)
Slotted12" (305mm)
1-1/4" x 42"(32mm x 1067mm)
5"(127mm)
12" sq. x 1-1/4" thk.(305mm x 32mm)
Slotted12" (305mm)
1-1/4" x 42"(32mm x 1067mm)
5"(127mm)
13-1/2" sq. x 1-1/4" thk.(343mm x 32mm)
Slotted14" (356mm)
Consult Pole SelectionChart on opposite page
3 - Order PMOS separately. Change “XX” to indicate height and side of pole location for pole preparation. EX: OS8A indicates preparation is to be 8ft. up from pole base on side A. Optimal distance from ground to sensor is 10ft.4 - OSXX option required.
STEEL ROUND TAPERED POLES
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
72
AR
EA
/ P
OL
ES
ALUMINUM FLUTED ROUND POLES WITH DECORATIVE BASE
ARRAFunding Compliant
POLE SHAFT - The pole shaft is either spun or extruded from 6000 series alloy aluminum. Tenon N option is 2-3/8” O.D. x 4” tall. Tenon 4N option is 4” O.D. x 5” tall. Aluminum 16 flat fluted round pole shafts with decorative base are 4”, 5” and 6” in diameter. Poles have a cast ring between shaft and tenon.
STRUCTURAL BASE - The structural base is cast from 356 alloy aluminum. FRN2 poles provided with a 4” wide x 5-5/8” tall access door. FRN3 poles provided with 3-1/4” wide x 16-1/2” tall access door. The pole shaft is inserted and welded into the structural base casting. The completed assembly is heat treated into a T6 temper after the structural welding is completed.
ANCHOR BOLTS - Set of four anchor bolts conform to ASTM F1554 Grade 55. Each bolt is provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end.
GROUND LUG - Ground lug is standard.
FINISHES - Baked-on polyester-powder finish provides one year limited warranty.
DETERMINING THE LUMINAIRE/POLE COMBINATION FOR YOUR APPLICATION:• Select luminaire from luminaire ordering information• Select bracket configuration if required• Determine EPA value from luminaire/bracket EPA chart• Select pole height• Select MPH to match wind speed in the application area (See windspeed map).• Confirm pole EPA equal to or exceeding value from note above• Confirm total luminaire/bracket weight does not exceed maximum weight shown
in chart below• Consult factory for special wind load requirements and banner brackets
DIMENSIONS
ACCESS DOOR LOCATION
Side “B”Side “D”
Side “A”(access door)
Side “C”
Sides A B C DAccess Door X
Cross Section
16 Flat Flute
FRN3 Access Door3-1/4" wide x 16-1/2" tall
(83mm x 419mm)
FRN2, FRN3 –N = 2-3/8" (60mm) O.D.
x 4" (102mm)Tall Tenon
4N = 4" (102mm)O.D.x 5" (127mm)
Tall Tenon
8'-18'(2.4m - 5.5m)
21-1/2”(546mm)
31-1/2”(800mm)
17” Dia.(432mm)
17” Dia.(432mm)
FRN2 Access Door 4" wide x 5-5/8" tall(102mm x 143mm)
FRN2 FRN3
OutsideDimensions
EPA based on AASHTO LTS-3-94. For applications in Canada and areas using code requirements other than AASHTO LTS-3-94, consult factory. Designs are limited to top-mounted luminaires and/or brackets having a centroid 2'-6" above and 1'-6" eccentric to the pole top at nominal mounting height. Variations from sizes above are available, consult factory. Satisfactory performance of poles is dependent upon the pole being properly attached to a supporting foundation of adequate design. Refer to EPA information on next page. Maximum luminaire/bracket weight is shown on the above chart.
MaterialHeight EPA80 MPH 90 MPH 100 MPH
BoltCircle
Max Weight(lbs)1
FRN3Wt (lbs)2
FRN2Wt (lbs)2
POLE SELECTION CHART: 4" (102mm), 5" (127mm) & 6" (152mm) 16 flat fluted round poles
1- Maximum weight of fixtures/brackets to be mounted to pole.2- Structure weight is a nominal value which includes the pole shaft and decorative base.
8' (2.4m) 13.3 10.2 8.0 4" (102mm) 0.125 300 O/P 67 748' (2.4m) 21.9 17.0 13.4 5" (127mm) 0.125 300 O/P 69 7610' (3.0m) 9.1 6.8 5.2 4" (102mm) 0.125 300 O/P 70 7810' (3.0m) 15.5 11.8 9.1 5" (127mm) 0.125 300 O/P 73 8112' (3.7m) 6.3 4.5 3.2 4" (102mm) 0.125 300 O/P 74 8112' (3.7m) 11.2 8.3 6.2 5" (127mm) 0.125 300 O/P 78 8512' (3.7m) 17.2 13.1 10.0 6" (152mm) 0.125 300 O/P 82 8714' (4.3m) 8.1 5.7 4.0 5" (127mm) 0.125 300 O/P 82 9014' (4.3m) 13.1 9.5 6.9 6" (152mm) 0.125 300 O/P 87 9316' (4.9m) 5.7 3.7 2.2 5" (127mm) 0.125 300 O/P 87 9416' (4.9m) 9.7 6.7 4.5 6" (152mm) 0.125 300 O/P 93 9816' (4.9m) 10.3 7.3 5.2 5" (127mm) 0.188 300 O/P 103 10918' (5.5m) 3.7 1.9 N/A 5" (127mm) 0.125 300 O/P 91 9918' (5.5m) 7.0 4.4 2.5 6" (152mm) 0.125 300 O/P 98 10418' (5.5m) 12.9 9.1 6.3 6" (152mm) 0.188 300 O/P 120 125
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
73
AR
EA
/ P
OL
ES
TYPICAL ORDER EXAMPLE:
Pole Series MaterialMounting
Configuration
POLE ORDERING INFORMATION
Height1Pole
Finish Options
BRZ – BronzeBLK – BlackWHT – WhiteSVG - Satin Verde GreenMSV - Metallic Silver
N – Tenon Mount4N - Tenon Mount
8'10'12'14'16'18'
A125 - .125 AluminumA188 - .188 Aluminum
Tenon MountRound Fluted Pole with 21-1/2" Tall Decorative Base4FRN25FRN26FRN2
Round Fluted Pole with 31-1/2" Tall Decorative Base4FRN35FRN36FRN3
LAB - Less Anchor Bolts
FOOTNOTES:1 - Pole heights will have +/- 2" tolerance.
5FRN2 A125 14 N BRZ
BOLT CIRCLE EPA INFORMATION
All poles are guaranteed to meet the EPA requirements listed. Pole manufacturer is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the pole will be located. CAUTION: This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole. Pole manufacturer cannot accept responsibility for harm or damage caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind velocity. Example: poles designed to withstand 80 MPH steady wind will withstand gusts to 104 MPH. EPAs are for locations 100 miles away from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal areas. For applications in Canada and areas using code requirements other than AASHTO LTS-3-94, consult factory.
Consult Pole SelectionChart on opposite page
Bolt Circle
Anchor Bolt Size
Anchor Bolt Projection
Base Plate Dimensions
O
11-1/2" +/- 1-1/2"(292mm +/- 38mm)
3/4" dia. x 17" x 3" hook(19mm x 432mm x 76mm)
3-1/2" +/- 1/4" (89mm +/- 6mm)
17" dia. x 3/4" thk.(432mm x 19mm)
11-1/2" +/- 1-1/2"(292mm +/- 38mm)
3/4" dia. x 17" x 3" hook(19mm x 432mm x 76mm)
3-1/2" +/- 1/4" (89mm +/- 6mm)
17" dia. x 3/4" thk.(432mm x 19mm)
Note: Base plate illustrations may change without notice. Do not use for setting anchor bolts. Consult factory for the base plate templates.
4", 5", & 6” FRN217"(432mm) diameter base plate
11-1/2" (292mm) Dia. Bolt Circle +/- 1-1/2" (38mm)
P
4", 5", & 6” FRN317"(432mm) diameter base plate
11-1/2" (292mm) Dia. Bolt Circle+/- 1-1/2" (38mm)
180o
90o 270o
0o - Access Door 0o - Access Door
ALUMINUM FLUTED ROUND POLES WITH DECORATIVE BASE
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
74
AR
EA
/ P
OL
ES
ALUMINUM ROUND POLES
ARRAFunding Compliant
POLE SHAFT - The pole shaft is extruded from seamless alloy aluminum. On tenon mount poles, tenon is of high-strength pipe. Tenon N option is 2-3/8” O.D. x 4” tall. Tenon 4N option is 4” O.D. x 5” tall. Aluminum round poles are 4” and 5” in diameter.
HAND HOLE - Covered and gasketed 2” x 4” non-reinforced hand-hole is located 12” above bottom of pole base. For pole with greater EPA rating, reinforced hand hole is available as an option; consult factory. Optional festoon for GFI receptacle (with or without GFI Kit supplied) is available. Minimum height for location of festoon is 18” above standard hand hole.
BASE - Pole base is cast from 356 alloy aluminum. Completed assembly is heat-treated to a T6 temper. Aluminum nut covers are included with anchor base.
BASE COVERS - Aluminum nut covers are included with anchor base. Optional two-piece decorative die-cast aluminum (GBC) base covers or optional one-piece spun aluminum collars are available. Must be ordered separately.
ANCHOR BOLTS - Set of four anchor bolts conform to ASTM F1554 Grade 55. Each bolt is provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end.
GROUND LUG - Ground lug is standard.
GROUND FAULT CIRCUIT INTERRUPTER - Ground fault circuit interrupter kit is optional. Pole Preparation (festoon) with GFI Kit must be ordered. Specify location in feet above base of pole and side orientation. Minimum height for location of festoon is 18” above standard hand hole.
FINISHES - Baked-on polyester-powder finish provides one year limited warranty.
DETERMINING THE LUMINAIRE/POLE COMBINATION FOR YOUR APPLICATION:• Select luminaire from luminaire ordering information• Select bracket configuration if required• Determine EPA value from luminaire/bracket EPA chart• Select pole height• Select MPH to match wind speed in the application area (See windspeed map).• Confirm pole EPA equal to or exceeding value from note above• Confirm total luminaire/bracket weight does not exceed maximum weight shown
in chart below• Consult factory for special wind load requirements and banner brackets
DIMENSIONS
DRILLING LOCATIONS
8'-20'(2.4m - 6.1m)
Hand-hole
12" (305mm)Standard
Side “B”Side “D”
Side “C”
Sides
Side “A” (Hand-hole Side)
A B C DHand-hole XSingle XD180° X XD90° X XT90° X X XTN120o* XQ90° X X X X*Other two locations will be 120o to the left and right side of A.
RPB3, RPB5 -Bolt-On Mount,
2-Bolt Pattern
Nut Covers(Standard)
GBC Two-PieceDecorative Cast
Base Cover(Optional)
One-Piece SpunAluminum Collar
(Optional)
RPN –N = 2-3/8" (60mm)O.D. x 4" (102mm)
Tall Tenon
4N = 4" (102mm)O.D. x 5" (127mm)
Tall Tenon
15"(381mm)
9-3/4”(248mm)
OutsideDimensions
EPA based on AASHTO LTS-3-94. For applications in Canada, areas using code requirements other than AASHTO LTS-3-94, and for banner brackets, consult factory. Designs are limited to top-mounted and side-mount luminaires. Variations from sizes above are available, consult factory. Satisfactory performance of poles is dependent upon the pole being properly attached to a supporting foundation of adequate design. Refer to EPA information on next page. Maximum luminaire/bracket weight is shown on the above chart.
Height EPA Material80 MPH 90 MPH 100 MPH
BoltCircle70 MPH
8' (2.4m)10' (3.0m)10' (3.0m)12' (3.7m)12' (3.7m)12' (3.7m)12' (3.7m)14' (4.3m)14' (4.3m)14' (4.3m)14' (4.3m)16' (4.9m)16' (4.9m)16' (4.9m)16' (4.9m)18' (5.5m)18' (5.5m)18' (5.5m)20' (6.1m)20' (6.1m)20' (6.1m)
4" (102mm)4" (102mm)5" (127mm)4" (102mm)5" (127mm)5" (127mm)5" (127mm)4" (102mm)5" (127mm)5" (127mm)5" (127mm)4" (102mm)5" (127mm)5" (127mm)5" (127mm)5" (127mm)5" (127mm)5" (127mm)5" (127mm)5" (127mm)5" (127mm)
10.78.1
15.46.2
12.215.518.84.69.7
12.515.33.27.49.8
12.25.67.79.74.15.97.6
6.04.38.93.06.98.9
10.91.95.37.08.71.03.85.36.72.73.95.11.72.83.8
4.73.37.12.25.57.18.71.24.15.56.90.53.04.15.32.03.04.01.22.02.9
EEFEFFFEFFFEFFFFFFFFF
7.95.9
11.54.39.0
11.514.03.06.99.1
11.21.95.16.98.73.75.26.82.43.85.2
0.1250.1250.1250.1250.1250.1560.1880.1250.1250.1560.1880.1250.1250.1560.1880.1250.1560.1880.1250.1560.188
Max Weight(lbs)1
7575
10075
100100100100100100100100100100100100100100100100100
StructureWeight (lbs)2
192227263238453036445233415058455565506172
POLE SELECTION CHART: 4" (102mm) and 5" (127mm) aluminum round poles
1- Maximum weight of fixtures/brackets to be mounted to pole.2- Structure weight is a nominal value which includes the pole shaft and base plate.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
75
AR
EA
/ P
OL
ES
ALUMINUM ROUND POLES
TYPICAL ORDER EXAMPLE:
Pole Series MaterialMounting
Configuration
POLE ORDERING INFORMATION
Height 3
ACCESSORY ORDERING INFORMATIONDescription Order Number
(Accessories are field installed)
PoleFinish Options
BRZ – BronzeBLK – BlackWHT – WhiteSVG - Satin Verde GreenMSV - Metallic Silver
S - Single/ParallelD180o - DoubleD90o - Double T90o - TripleTN120o - TripleQ90o - Quad
N – Tenon Mount4N - Tenon Mount (Available with 5RPN only. For 4" poles, use 4RPSF below)
*
8'10'12'14'16'18'20'
A125 - .125 AluminumA156 - .156 AluminumA188 - .188 Aluminum
Bolt-On Mount1 - See selection guide following Steel Round Tapered Poles data sheet for patterns and fixture matches.4RPB3 - 3" Reduced Drilling Pattern5RPB3 - 3" Reduced Drilling Pattern4RPB5 - 5" Traditional Drilling Pattern5RPB5 - 5" Traditional Drilling Pattern
Tenon Mount - See selection guide following Steel Round Tapered Poles data page for tenon and fixture/bracket matches.4RPN5RPN2
Greenlee Slipfit - Use with Greenlee Lifestyle CC, SC & CH mounting styles. Enterprise, Intrepid & Lexington PT single mounting styles 24RPSF
Greenlee Universal Bracket1 (No Drilling) - Use with Lifestyle UCLS and UCLD1804RPI5RPI
RHH - Reinforced Hand Hole4
FP - Festoon Outlet Provision Less GFI Kit5FPG - Festoon Outlet Provision With GFI Kit5LAB - Less Anchor Bolts
FOOTNOTES:1 - Standard pole cap provided. Domed Greenlee pole cap will ship with SA4 and SA5 Enterprise, Intrepid and
Lexington fixtures, SA Lifestyle fixtures, BK SPT BO, BK MPT BO and UCL brackets. 2 - For Enterprise, Intrepid and Lexington D180o or other mounting configuration styles using BK SPT BO and
BK MPT BO accessories, order 4RPB3 or 5RPB3 pole.
5RPB5 A188 20 S BRZ
4 / 5 GBC - Decorative Base Cover4RSAC - 4" Round 1-Piece Spun Aluminum Collar5RSAC - 5" Round 1-Piece Spun Aluminum CollarBBB - Breakaway Banner Brackets++Banner Brackets will add EPA to pole.
483859CLR506859CLR506860CLR
Consult Factory+
BOLT CIRCLE EPA INFORMATION
All poles are guaranteed to meet the EPA requirements listed. Pole manufacturer is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the pole will be located. CAUTION: This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole. Pole manufacturer cannot accept responsibility for harm or damage caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind velocity. Example: poles designed to withstand 80 MPH steady wind will withstand gusts to 104 MPH. EPAs are for locations 100 miles away from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal areas. For applications in Canada, areas using code requirements other than AASHTO LTS-3-94, and for banner brackets, consult factory.
Consult Pole SelectionChart on opposite page
Bolt Circle
Anchor Bolt Size
Anchor Bolt Projection
Base Plate Dimensions
E
7-1/2" +/- 3/4"(191mm +/- 19mm)
3/4" dia. x 17" x 3" hook(19mm x 432mm x 76 mm)
3-1/4"(83mm)
8-15/16" sq. x 5/8" thk.(226mm x 16mm)
Note: Base plate illustrations may change without notice. Do not use for setting anchor bolts. Consult factory for the base plate templates.
F
4" (102mm) Round
8-5/8" +/- 7/8"(219mm +/- 22mm)
3/4" dia. x 17" x 3" hook(19mm x 432mm x 76 mm)
3-1/4"(83mm)
9-5/8" sq. x 5/8" thk.(244mm x 16mm)
8-15/16" (226mm) Square Base Plate
7-1/2" (191mm) Dia. Bolt Circle+/- 3/4" (19mm)
5" (127mm) Round9-5/8" (244mm) Square Base Plate
8-5/8" (219mm) Dia. Bolt Circle+/- 7/8" (22mm)
3 - Pole heights will have +/- 2" tolerance.
4 - Reinforced hand-holes are 2-3/8” x 4” on 4” dia. round poles and 3” x 5” on 5” dia. round poles. Both are located 18” above bottom of pole base.
5 - Specify location in feet above base of pole and side orientation. Minimum height is 18” above standard hand hole.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
76
AR
EA
/ P
OL
ES
ALUMINUM ROUND HINGED BASE POLES
ARRAFunding Compliant
POLE SHAFT - The pole shaft is extruded from seamless alloy aluminum. Tenon N option is 2-3/8” O.D. x 4” tall. Tenon 4N option is 4” O.D. x 5” tall. Aluminum round poles are 4” and 5” in diameter.
HAND HOLE - Round hinged poles are shipped standard without hand hole. An optional covered, gasketed, non-reinforced hand hole is available. Optional festoon for GFI receptacle (with or without GFI Kit supplied) is available.
BASE - Hinged pole base is cast from 356 alloy aluminum. Completed assembly is heat-treated to a T6 temper.
BASE COVERS - Aluminum two-piece base cover is included.
ANCHOR BOLTS - Set of four anchor bolts conform to ASTM F1554 Grade 55. Each bolt is provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end.
GROUND LUG - Ground lug is standard.
GROUND FAULT CIRCUIT INTERRUPTER - Ground fault circuit interrupter kit is optional. Pole Preparation (festoon) with GFI Kit must be ordered. Specify location in feet above base of pole and side orientation. If optional hand hole ordered, minimum height for location of festoon is 18” above hand hole. If no hand hole required, minimum height is 12” above bottom of pole base.
FINISHES - Baked-on polyester-powder finish provides one year limited warranty.
DETERMINING THE LUMINAIRE/POLE COMBINATION FOR YOUR APPLICATION:• Select luminaire from luminaire ordering information• Select bracket configuration if required• Determine EPA value from luminaire/bracket EPA chart• Select pole height• Select MPH to match wind speed in the application area (See windspeed map).• Confirm pole EPA equal to or exceeding value from note above• Confirm total luminaire/bracket weight does not exceed maximum weight shown
in chart below• Consult factory for special wind load requirements and banner brackets
DIMENSIONS
DRILLING LOCATIONS
8'-20'(2.4m - 6.1m)
Side “B”Side “D”
Side “A”
Side “C”
Sides A B C DHinge X
XHand-hole (optional) Single XD180° X XD90° X XT90° X X XTN120o* XQ90° X X X X*Other two locations will be 120o to the left and right side of A.
RHPB3, RHPB5 -Bolt-On Mount,
2-Bolt Pattern
Round HingedBase
Aluminum 2-PieceCast Base Cover
(Standard)
RHPN –N = 2-3/8" (60mm) O.D.
x 4" (102mm)Tall Tenon
4N = 4" (102mm)O.D.x 5" (127mm)
Tall Tenon
OutsideDimensions
EPA based on AASHTO LTS-3-94. For applications in Canada and areas using code requirements other than AASHTO LTS-3-94, consult factory. Designs are limited to top-mounted and side-mount luminaires. Variations from sizes above are available, consult factory. Satisfactory performance of poles is dependent upon the pole being properly attached to a supporting foundation of adequate design. Refer to EPA information on next page. Maximum luminaire/bracket weight is shown on the above chart.
MaterialHeight EPA80 MPH 90 MPH 100 MPH
BoltCircle70 MPH
Max Weight(lbs)1
StructureWeight (lbs)2
POLE SELECTION CHART: 4" (102mm) and 5" (127mm) aluminum round hinged base poles
1- Maximum weight of fixtures/brackets to be mounted to pole.2- Structure weight is a nominal value which includes the pole shaft and base plate.
CAUTION: Raising or lowering of the pole requires adequate preparation. Do not underestimate the forcerequired to raise or lower poles with heavy luminaires at the top.
8' (2.4m) 10.8 8.0 6.1 4.8 4" (102mm) 0.125 50 W 1910' (3.0m) 8.2 5.9 4.4 3.3 4" (102mm) 0.125 50 W 2210' (3.0m) 15.5 11.6 9.0 7.2 5" (127mm) 0.125 50 W 2712' (3.7m) 6.3 4.4 3.1 2.2 4" (102mm) 0.125 50 W 2612' (3.7m) 12.4 9.1 7.0 5.6 5" (127mm) 0.125 50 W 3212' (3.7m) 15.7 11.6 9.0 7.2 5" (127mm) 0.156 50 W 3812' (3.7m) 18.9 14.1 11.0 8.8 5" (127mm) 0.188 50 W 4514' (4.3m) 4.7 3.1 2.0 1.3 4" (102mm) 0.125 50 W 3014' (4.3m) 9.8 7.0 5.4 4.2 5" (127mm) 0.125 50 W 3614' (4.3m) 12.6 9.2 7.1 5.6 5" (127mm) 0.156 50 W 4414' (4.3m) 15.4 11.3 8.7 6.9 5" (127mm) 0.188 50 W 5216' (4.9m) 3.4 2.0 1.1 0.5 4" (102mm) 0.125 50 W 3316' (4.9m) 7.6 5.2 3.9 3.0 5" (127mm) 0.125 50 W 4116' (4.9m) 10.0 7.1 5.4 4.2 5" (127mm) 0.156 50 W 5016' (4.9m) 12.3 8.9 6.8 5.3 5" (127mm) 0.188 50 W 5818' (5.5m) 5.7 3.7 2.7 2.0 5" (127mm) 0.125 75 W 4518' (5.5m) 7.7 5.3 4.0 3.0 5" (127mm) 0.156 75 W 5518' (5.5m) 9.8 6.8 5.2 4.0 5" (127mm) 0.188 75 W 6520' (6.1m) 4.2 2.5 1.7 1.2 5" (127mm) 0.125 75 W 5020' (6.1m) 6.0 3.9 2.8 2.1 5" (127mm) 0.156 75 W 6120' (6.1m) 7.7 5.2 3.9 2.9 5" (127mm) 0.188 75 W 72
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
77
AR
EA
/ P
OL
ES
ALUMINUM ROUND HINGED BASE POLES
TYPICAL ORDER EXAMPLE:
Pole Series MaterialMounting
Configuration
POLE ORDERING INFORMATION
Height 3Pole
Finish Options
BRZ – BronzeBLK – BlackWHT – WhiteSVG - Satin Verde GreenMSV - Metallic Silver
S - Single/ParallelD180o - DoubleD90o - Double T90o - TripleTN120o - TripleQ90o - Quad
N – Tenon Mount4N - Tenon Mount (Available with 5RHPN only. For 4" poles, use 4RHPSF below
*
8'10'12'14'16'18'20'
A125 - .125 AluminumA156 - .156 AluminumA188 - .188 Aluminum
Bolt-On Mount1 - See selection guide following Steel Round Tapered Poles data sheet for patterns and fixture matches.4RHPB3 - 3" Reduced Drilling Pattern5RHPB3 - 3" Reduced Drilling Pattern4RHPB5 - 5" Traditional Drilling Pattern5RHPB5 - 5" Traditional Drilling Pattern
Tenon Mount - See selection guide following Steel Round Tapered Poles data page for tenon and fixture/bracket matches.4RHPN5RHPN2
Greenlee Slipfit - Use with Greenlee Lifestyle CC, SC & CH mounting styles. Enterprise, Intrepid & Lexington PT Single mounting styles 24RHPSF
Greenlee Universal Bracket1 (No Drilling) - Use with Lifestyle UCLS and UCLD1804RHPI5RHPI
HH - Non-reinforced Gasketed Hand Hole4
FP - Festoon Outlet Provision Less GFI Kit5FPG - Festoon Outlet Provision With GFI Kit5LAB - Less Anchor Bolts
FOOTNOTES:1 - Standard pole cap provided. Domed Greenlee pole cap will ship with SA4 and SA5 Enterprise, Intrepid and
Lexington fixtures, SA Lifestyle fixtures, BK SPT BO, BK MPT BO and UCL brackets. 2 - For Enterprise, Intrepid and Lexington D180o or other mounting configuration styles using BK SPT BO and
BK MPT BO accessories, order 4RPB3 or 5RPB3 pole. 3 - Pole heights will have +/- 2" tolerance.
5RHPB5 A188 20 S BRZ
BOLT CIRCLE EPA INFORMATION
All poles are guaranteed to meet the EPA requirements listed. Pole manufacturer is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the pole will be located. CAUTION: This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole. Pole manufacturer cannot accept responsibility for harm or damage caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind velocity. Example: poles designed to withstand 80 MPH steady wind will withstand gusts to 104 MPH. EPAs are for locations 100 miles away from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal areas. For applications in Canada and areas using code requirements other than AASHTO LTS-3-94, consult factory.
Consult Pole SelectionChart on opposite page
Bolt Circle
Anchor Bolt Size
Anchor Bolt Projection
Base Plate Dimensions
W
9-1/4" +/- 3/4"(235mm +/- 19mm)
3/4" dia. x 17" x 3" hook(19mm x 432mm x 76 mm)
3-1/2"(89mm)
12-5/8" dia. x 3/4" thk.(321mm x 19mm)
Note: Base plate illustrations may change without notice. Do not use for setting anchor bolts. Consult factory for the base plate templates.
4" (102mm) & 5" (127mm) Round Hinged12-5/8"(321mm) diameter base plate
9-1/4" (235mm) Dia. Bolt Circle+/- 3/4"(19mm)
4 - Covered and gasketed 2” x 4” non-reinforced had-hole is located 12” above bottom of pole base.
5 - Specify location in feet above base of pole and side orientation. If optional hand hole ordered, minimum height for location of festoon is 18” above hand hole. If no hand hole required, minimum height is 12” above bottom of pole base.
(optional)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
78
AR
EA
/ P
OL
ES
ALUMINUM ROUND TAPERED POLES
ARRAFunding Compliant
POLE SHAFT - The pole shaft is spun from seamless alloy aluminum. On Tenon Mount poles, tenon is 2-3/8” O.D. x 4” tall high-strength pipe.
HAND HOLE - On listed poles 20’ and under, standard non-reinforced hand-hole is 2” x 4”. For poles with greater EPA rating, reinforced hand hole is available as an option; consult factory. Listed poles 25’ and above have a 4” x 6” reinforced hand-hole as standard. Hand-hole gasket and cover are provided. Hand-hole is located 12” above pole base on poles with 5” O.D. bottom and 18” above pole base on poles with 6”, 8” or 9” O.D. bottom (see Pole Selection Chart below). Optional festoon for GFI receptacle (with or without GFI Kit supplied) is available. Minimum height for location of festoon is 18” above standard hand hole.
BASE - Pole base is cast from 356 alloy aluminum. Completed assembly is heat-treated to a T6 temper. Aluminum nut covers are included with anchor base.
BASE COVERS - Aluminum nut covers are included with anchor base. Optional one-piece round spun aluminum collars are available for poles with 5”, 6” or 8” O.D. bottom (see Pole Selection Chart below). Must be ordered separately.
ANCHOR BOLTS - Set of four anchor bolts conform to ASTM F1554 Grade 55. Each bolt is provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end.
GROUND LUG - Ground lug is standard.
GROUND FAULT CIRCUIT INTERRUPTER - Ground fault circuit interrupter kit is optional. Pole Preparation (festoon) with GFI Kit must be ordered. Specify location in feet above base of pole and side orientation. Minimum height for location of festoon is 18” above standard hand hole.
FINISHES - Baked-on polyester-powder finish provides one year limited warranty.
DETERMINING THE LUMINAIRE/POLE COMBINATION FOR YOUR APPLICATION:• Select luminaire from luminaire ordering information• Select bracket configuration if required• Determine EPA value from luminaire/bracket EPA chart• Select pole height• Select MPH to match wind speed in the application area (See windspeed map).• Confirm pole EPA equal to or exceeding value from note above• Confirm total luminaire/bracket weight does not exceed maximum weight shown
in chart below• Consult factory for special wind load requirements and banner brackets
DIMENSIONS
DRILLING LOCATIONS
18'-30'
Side “B”Side “D”
Side “C”
Sides
Side “A” (Hand-hole Side)
A B C DHand-hole XSingle XD180° X XD90° X XT90° X X XTN120o* XQ90° X X X X*Other two locations will be 120o to the left and right side of A.
RTPB5 -Bolt-On Mount,
2-Bolt Pattern
RTPN –N = 2-3/8" (60mm) O.D.
x 4" (102mm)Tall Tenon
Nut Covers(Standard)
One-Piece SpunAluminum Collar
(Optional)
12” (305mm) for5” Pole Bottom
18"(457mm) for6”, 8” or 9” Pole Bottom
Height Pole TopO.D.1
Pole BottomO.D.1
EPA based on AASHTO LTS-3-94. For applications in Canada and areas using code requirements other than AASHTO LTS-3-94, consult factory. Designs are limited to top-mounted and side-mount luminaires. Variations from sizes above are available, consult factory. Satisfactory performance of poles is dependent upon the pole being properly attached to a supporting foundation of adequate design. Refer to EPA information on next page. Maximum luminaire/bracket weight is shown on the above chart.
Material80 MPH 90 MPH
100 MPHBolt
Circle70 MPHEPA Max Wt
(lbs)2Struct.
Wt (lbs)3
POLE SELECTION CHART: aluminum round tapered poles
1- Variations from sizes above are available.2- Maximum weight of fixtures/brackets to be mounted to pole.3- Structure weight is nominal value which includes the pole shaft and base plate.
18' (5.5m) 6.5 4.4 3.1 2.2 3.0 (76mm) 5.0 (127mm) 0.125 100 F 4018' (5.5m) 15.4 11.3 8.6 6.8 4.0 (102mm) 6.0 (152mm) 0.156 100 X 5918' (5.5m) 18.9 14.0 10.7 8.5 4.0 (102mm) 6.0 (152mm) 0.188 100 X 7020' (6.1m) 5.1 3.3 2.1 1.3 3.0 (76mm) 5.0 (127mm) 0.125 100 F 4220' (6.1m) 12.7 9.1 6.8 5.3 4.0 (102mm) 6.0 (152mm) 0.156 100 X 6320' (6.1m) 15.8 11.4 8.6 6.8 4.0 (102mm) 6.0 (152mm) 0.188 100 X 7425' (7.6m) 19.4 14.2 10.8 8.5 4.5 (114mm) 8.0 (203mm) 0.156 150 Y 9625' (7.6m) 24.2 17.8 13.7 10.8 4.5 (114mm) 8.0 (203mm) 0.188 150 Y 11330' (9.1m) 18.8 13.6 10.3 8.0 4.5 (114mm) 9.0 (229mm) 0.156 150 Z 12730' (9.1m) 23.7 17.4 13.3 10.4 4.5 (114mm) 9.0 (229mm) 0.188 150 Z 14930' (9.1m) 24.2 17.7 13.6 10.7 4.5 (114mm) 8.0 (203mm) 0.250 150 Y 174
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
79
AR
EA
/ P
OL
ES
ALUMINUM ROUND TAPERED POLES
TYPICAL ORDER EXAMPLE:
Pole Series MaterialMounting
Configuration
POLE ORDERING INFORMATION
Height 2
ACCESSORY ORDERING INFORMATIONDescription Order Number
(Accessories are field installed)
PoleFinish Options
BRZ – BronzeBLK – BlackWHT – WhiteSVG - Satin Verde GreenMSV - Metallic Silver
S - Single/ParallelD180o - DoubleD90o - Double T90o - TripleTN120o - TripleQ90o - Quad
N – Tenon Mount
18' - 17'-8"20' - 19'-8"25' - 24'-8"30' - 29'-8"
A125 - .125 AluminumA156 - .156 AluminumA188 - .188 AluminumA250 - .250 Aluminum
Bolt-On Mount1 - See selection guide following Steel Round Tapered Poles data sheet for patterns and fixture matches.RTPB5 - 5" Traditional Drilling Pattern
Tenon Mount - See selection guide following Steel Round Tapered Poles data page for tenon and fixture/bracket matches.RTPN
RHH - Reinforced Hand-hole for poles 20’ and under3
FP - Festoon Outlet Provision Less GFI Kit4FPG - Festoon Outlet Provision With GFI Kit4LAB - Less Anchor Bolts
FOOTNOTES:1 - Standard pole cap provided. 2 - Pole heights will have +/- 2" tolerance.
3 - Reinforced hand-holes are 3” x 5” on poles with 5” or 6” O.D. bottom and located 18” above pole base.
4 - Specify location in feet above base of pole and side orientation. Minimum height is 18" above standard hand hole.
RTPB5 A156 25 S BRZ
5RSAC - Round 1-Piece Spun Aluminum Collar for RTP w/5” bottom6RSAC - Round 1-Piece Spun Aluminum Collar for RTP w/6” bottom8RSAC - Round 1-Piece Spun Aluminum Collar for RTP w/8” bottom
505647CLR505648CLR505649CLR
BOLT CIRCLE
EPA INFORMATIONAll poles are guaranteed to meet the EPA requirements listed. Pole manufacturer is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the pole will be located. CAUTION: This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole. Pole manufacturer cannot accept responsibility for harm or damage caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind velocity. Example: poles designed to withstand 80 MPH steady wind will withstand gusts to 104 MPH. EPAs are for locations 100 miles away from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal areas. For applications in Canada and areas using code requirements other then AASHTO LTS-3-94, consult factory.
Consult Pole SelectionChart on opposite page
Bolt Circle
Anchor Bolt Size
Anchor Bolt Projection
Base Plate Dimensions
F
8-5/8" +/- 7/8"(219mm +/- 22mm)
3/4" dia. x 17" x 3" hook(19mm x 432mm x 76 mm)
3-1/4"(83mm)
9-5/8" sq. x 5/8" thk.(244mm x 16mm)
Note: Base plate illustrations may change without notice. Do not use for setting anchor bolts. Consult factory for the base plate templates.
X
9-1/2" +/- 3/4"(241mm +/- 19mm)
3/4" dia. x 17" x 3" hook(19mm x 432mm x 76 mm)
3-1/2"(89mm)
10-5/16" sq. x 5/8" thk.(262mm x 16mm)
Y
11-5/8" +/- 3/8"(295mm +/- 9mm)
1" dia. x 36" x 4" hook(25mm x 914mm x 102mm)
4-1/8"(105mm)
12-1/16" sq. x 3/4" thk.(306mm x 19mm)
Z
13-1/4" +/- 3/4"(337mm +/- 19mm)
1" dia. x 36" x 4" hook (25mm x 914mm x 102mm)
4-1/8"(105mm)
12-1/2" sq. x 1-1/4" thk.(317mm x 32mm)
5" (127mm) O.D. Pole Bottom9-5/8" (244mm) square base plate
8-5/8" (219mm) Dia. Bolt Circle+/- 7/8" (22mm)
6" (152mm) O.D. Pole Bottom10-5/16" (262mm) square base plate
9-1/2" (241mm) Dia. Bolt Circle+/- 3/4" (19mm)
8" (203mm) O.D. Pole Bottom12-1/16"(306mm) square base plate
11-5/8" (295mm) Dia. Bolt Circle+/- 3/8" (9mm)
9" (229mm) O.D. Pole Bottom12-1/2" (317mm) square base plate
13-1/4" (337mm) Dia. Bolt Circle+/- 3/4" (19mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
80
AR
EA
/ P
OL
ES
ALUMINUM SQUARE POLES (SOFT CORNER)
ARRAFunding Compliant
POLE SHAFT - The soft corner pole shaft is extruded from seamless alloy aluminum. On Tenon Mount poles, tenon is 2-3/8” O.D. x 4” tall high-strength pipe. Aluminum straight poles are 4”, 5” and 6” square.
HAND-HOLE - On 4” square poles, standard hand hole is 2” x 4” located 12” up from bottom of base plate. On 5” square poles, standard hand hole is 2” x 4” located 14” up from bottom of base plate. On 6” square poles, standard hand hole is 2-5/8” x 5” located 18” up from bottom of base plate. Hand hole gasket is provided. Optional festoon for GFI receptacle (with or without GFI Kit supplied) is available. Minimum height for location of festoon is 18” above standard hand hole.
BASE - Pole base is cast from 356 alloy aluminum. Completed assembly is heat-treated to a T6 temper. Tamper-resistant aluminum nut cover discs are included with anchor base.
BASE COVERS - Tamper-resistant aluminum nut cover discs are included with anchor base. Optional two-piece square cast base covers available. Must be ordered separately.
ANCHOR BOLTS - Set of four anchor bolts conform to ASTM F1554 Grade 55. Each bolt is provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end.
GROUND LUG - Ground lug is standard.
GROUND FAULT CIRCUIT INTERRUPTER - Ground fault circuit interrupter kit is optional. Pole Preparation (festoon) with GFI Kit must be ordered. Specify location in feet above base of pole and side orientation. Minimum height for location of festoon is 18” above standard hand hole.
FINISHES - Baked-on polyester-powder finish provides one year limited warranty.
DETERMINING THE LUMINAIRE/POLE COMBINATION FOR YOUR APPLICATION:• Select luminaire from luminaire ordering information• Select bracket configuration if required• Determine EPA value from luminaire/bracket EPA chart• Select pole height• Select MPH to match wind speed in the application area (See windspeed map).• Confirm pole EPA equal to or exceeding value from note above• Confirm total luminaire/bracket weight does not exceed maximum weight shown
in chart below • Consult factory for special wind load requirements
DIMENSIONS
8'-35'(2.4m - 10.7m)
Hand-hole
Hand Hole Heights4" (102mm) = 12" (305mm) Standard5" (127mm) = 14" (356mm) Standard6" (152mm) = 18" (457mm) Standard
SQB3, SQB5 –Bolt-On Mount2-Bolt Pattern
SQI –No Mounting
Holes
Nut Covers Discs(Standard)
Square Two-PieceCast Base Cover
(Optional)
SQN –N = 2-3/8" (60mm)
O.D. x 4" (102mm)Tall Tenon
DRILLING LOCATIONS
Side “B”Side “D”
Side “C”
Sides
Side “A” (Hand-hole Side)
A B C DHand-hole XSingle XD180° X XD90° X XT90° X X XQ90° X X X X
OutsideDimensions
EPA based on commercial criteria. For applications in Canada and areas using code requirements other than commercial criteria, consult factory. Designs are limited to top-mounted and side-mount luminaires. Variations from sizes above are available, consult factory. Satisfactory performance of poles is dependent upon the pole being properly attached to a supporting foundation of adequate design. Refer to EPA information on next page. Maximum luminaire/bracket weight is shown on the above chart.
Height EPA Material80 MPH 90 MPH 100 MPH
BoltCircle70 MPH
8' (2.4m)10' (3.0m)12' (3.7m)14' (4.3m)15' (4.6m)16' (4.9m)16' (4.9m)18' (5.5m)18' (5.5m)18' (5.5m)20' (6.1m)20' (6.1m)20' (6.1m)20' (6.1m)20' (6.1m)25' (7.6m)25' (7.6m)25' (7.6m)30' (9.1m)32' (9.8m)35' (10.7m)
4" (102mm)4" (102mm)4" (102mm)4" (102mm)4" (102mm)4" (102mm)4" (102mm)4" (102mm)4" (102mm)5" (127mm)4" (102mm)4" (102mm)5" (127mm)6" (152mm)6" (152mm)5" (127mm)6" (152mm)6" (152mm)6" (152mm)6" (152mm)6" (152mm)
24.318.914.711.98.37.312.35.910.118.04.18.115.424.833.89.515.823.314.212.29.1
14.010.57.75.83.83.16.12.14.69.0N/A3.17.1
12.317.83.06.1
10.74.83.2N/A
10.98.05.74.12.61.94.3N/A3.06.4N/A1.74.78.7
13.21.03.37.02.0N/AN/A
GGGGGGGGGHGGHIIHIIIII
18.213.910.68.35.74.88.63.66.812.72.15.210.517.424.35.610.115.88.66.94.2
0.1250.1250.1250.1250.1250.1250.1880.1250.1880.1880.1250.1880.1880.1880.2500.1880.1880.2500.2500.2500.250
Max Weight(lbs)1
350260260200200200200100150260150150150150260100260260260150100
StructureWeight (lbs)2
24283337394259466685517393114148115139182216229250
POLE SELECTION CHART: 4" (102mm), 5" (127mm) and 6" (152mm) aluminum square poles
1- Maximum weight of fixtures/brackets to be mounted to pole.2- Structure weight is a nominal value which includes the pole shaft and base plate.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
81
AR
EA
/ P
OL
ES
ALUMINUM SQUARE POLES (SOFT CORNER)
TYPICAL ORDER EXAMPLE:
Pole Series MaterialMounting
Configuration4
POLE ORDERING INFORMATION
Height2
ACCESSORY ORDERING INFORMATIONDescription Order Number
(Accessories are field installed)
PoleFinish Options
BRZ – BronzeBLK – BlackWHT – WhiteSVG - Satin Verde GreenMSV - Metallic Silver
S - Single/ParallelD180o - DoubleD90o - Double T90o - TripleQ90o - Quad
N – Tenon Mount
*
8'10'12'14'16'18'20'25'30'332'335'3
A125 - .125 AluminumA188 - .188 AluminumA250 - .250 Aluminum
Bolt-On Mount - See selection guide for patterns and fixture matches.4SQB3 - 3" Reduced Drilling Pattern5SQB3 - 3" Reduced Drilling Pattern4SQB5 - 5" Traditional Drilling Pattern5SQB5 - 5" Traditional Drilling Pattern6SQB5 - 5" Traditional Drilling Pattern
Tenon Mount - See selection for tenon and fixture/bracket matches.4SQN5SQN6SQN
Internal Slip-fitter1
No mounting holes or pole caps - Use with BKA 4ISF, BKA 5ISF, BKA X4ISF & BKA X5ISF4SQI5SQI
FP - Festoon Outlet Provision Less GFI Kit5FPG - Festoon Outlet Provision With GFI Kit5LAB - Less Anchor Bolts
FOOTNOTES:1 - See Area Lighting Brackets - Bolt-on and XAS3/XAMU Area Lighting Brackets pages for Internal Slip-fitter brackets. 2 - Pole heights will have +/- 2" tolerance. 3 - Pole includes factory installed vibration damper.
5SQB5 A188 25 S BRZ
4DABC - 4" Square Cast 2-Piece Base Cover5DABC - 5" Square Cast 2-Piece Base Cover6DABC - 6" Square Cast 2-Piece Base Cover
505605CLR505606CLR505608CLR
BOLT CIRCLE EPA INFORMATION
All poles are guaranteed to meet the EPA requirements listed. Pole manufacturer is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the pole will be located. CAUTION: This guarantee does not apply if the pole/bracket/fixture combination is used to support any other items such as flags, pennants, or signs, which would add stress to the pole. Pole manufacturer cannot accept responsibility for harm or damage caused in these situations.
NOTE: Pole calculations include a 1.3 gust factor over steady wind velocity. Example: poles designed to withstand 80 MPH steady wind will withstand gusts to 104 MPH. EPAs are for locations 100 miles away from hurricane ocean lines. Consult LSI for other areas. Note: Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal areas. For applications in Canada, and areas using code requirements other than commercial criteria, consult factory.
Consult Pole SelectionChart on opposite page
Bolt Circle
Anchor Bolt Size
Anchor Bolt Projection
Base Plate Dimensions
G
9" +/- 1/2"(229mm +/- 13mm)
3/4" dia. x 17" x 3" hook(19mm x 432mm x 76 mm)
3-1/8"(79mm)
9-15/16" sq. x 3/8" thk.(252mm x 10mm)
I
12-1/2" +/- 7/16"(318mm +/- 11mm)
1" dia. x 36" x 4" hook(25mm x 914mm x 102mm)
4"(102mm)
12-3/4" sq. x 9/16" thk.(324mm x 14mm)
Note: Base plate illustrations may change without notice. Do not use for setting anchor bolts. Consult factory for the base plate templates.
H
4" (102mm) Square
11" +/- 1/2"(279mm +/- 13mm)
3/4" dia. x 17" x 3" hook(19mm x 432mm x 76 mm)
3-1/4"(83mm)
11-9/16" sq. x 1/2" thk.(294mm x 13mm)
9-15/16" (252mm) Square Base Plate
9" (229mm) Dia. Bolt Circle+/- 1/2” (13mm)
6" (152mm) Square12-3/4" (324mm) Square Base Plate
12-1/2" (318mm) Dia. Bolt Circle+/- 7/16” (11mm)
5" (127mm) Square11-9/16" (294mm) Square Base Plate
11" (279mm) Dia. Bolt Circle+/- 1/2” (13mm)
4 - TN120o mounting configuration not available.5 - Specify location in feet above base of pole and side orientation.
Minimum height is 18" up from standard hand hole.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
82
AR
EA
/ P
OL
ES LSI ABOLITE NOSTALGIC POLES
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
83
AR
EA
/ P
OL
ES
LSI ABOLITE POLES
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
84
AR
EA
/ P
OL
ES SELECTION GUIDE FOR ROUND AND SQUARE POLES
ARRAFunding Compliant
3” REDUCED
DRILLING PATTERN
Use when mounting the below fixtures & bracket/fixture combinations:
ROUND POLES - 4RPB3 / 5RPB3
•• ASU, XASU & XAMU (requires X4RPP or X5RPP)
•• XPMAR Option on XPWS
•• SA4 & SA5 Mounting Styles on XCN3, XINM, XENM, ENS, INSENM, INM & Lifestyle LS & LM
•• BK SPT BO 4 & BK SPT BO 5 Accessories in Single,D180 or other multiple mounting configurations on ENS, INS & LXS
•• BK MPT BO 4 & BK MPT BO 5 Accessories in Single,D180 or other multiple mounting configurations on XCN3, XENM, XINM, XLXM, ENM, INM & LXM
SQUARE POLES - 4SQB3 / 5SQB3
• XAMU
•• XPMA Option on XPWS
•• ASU
•• XASU
•• XCHWM3 and XGBWM
ROUND POLES AND SQUARE POLES WITH N TENON MOUNTING CONFIGURATION
4RPN / 5RPN / 4SQN / 5SQN / 6SQN with N Tenon Configuration
Select this Tenon Mounting Configuration to use with vertically mounted tenon brackets shown on pages titled -
•• Area Lighting Brackets - enon Mount
•• Flood Lighting Bracket
•• ASU/XASU/XAMU Area Light Brackets
•• LED Roadway Light Mast Arm
Subject to change. Consult factory.
BOLT-ON MOUNT
TENON MOUNT
5” TRADITIONAL
DRILLING PATTERN
Use when mounting the below fixtures & bracket/fixture combinations:
ROUND & SQUARE POLES - 4RPB5/5RPB5/4SQB5/5SQB5/6SQB5
On Round Poles, round pole plate is required except for HR, HFSH, HFSV & HFR fixtures.
CH2HM CH2VM CHH
CT2H CT2V
CTM CVF
GBM GBR
GFR HE
HFSH HFSV
PTH PTHS
XGB3 XPT3
CHV
CTL
GB
GFM
HFR
HR
XCHM3
XPTS3 XSB
PMA (for Square Pole) & PMAR (for Round Pole) Options on CHWS,
CHWM, GBWS, GBWM, HIWSD, HIWSU, HIWS and PTWS
5” DIAMETER ROUND POLES WITH 4N TENON MOUNTING CONFIGURATION
5RPN with 4N Tenon Configuration
4N Tenon Mount Configuration is available with 5RPN only. (See 4RPSF for 4” poles). Select to use with:
•• Greenlee Lifestyle CC, SC & CH mounting style
•• Constitution, Enterprise, Intrepid & Lexington PT Single mountinstyles (For D180 or other mounting configuration styles requiring BK SPT BO or BK MPT BO accessories, see Bolt-on Mount 4RPB3 / 5RPB3 drilling pattern section.)
N = 2-3/8” O.D.X
4-3/4” tall
4N = 4” O.D.X
4-7/8” tall
1-1/16”(27mm)
2-1/8”(54mm)
2X 9/16” - 7/8” SLOT
Ø 5/8”
3-1/2”(89mm)
2-1/2”(64mm)
4-5/8”(117mm)
1-1/2”(38mm)
9/16” DIA. HOLES(TYP. 2 PLCS.)
3/4” DIA. HOLE
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
85
AR
EA
/ P
OL
ES
WINDSPEED MAP
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
86
AR
EA
/ P
OL
ES
PASU/XASU/XAMU AREA LIGHT BRACKETS BOLT ON BRACKETS
EXTENSION ARM - Use this 6" extension armto position the fixture further from the pole.
BKA-XBO-EC-6-CLR
Note: PASU/XASU/XAMU can be mounted in any drilling configuration (D180, D90, etc.) without the use of this arm. Order Number 382136CLR
WALL MOUNT PLATE - Order Number 382132CLR
BKS XBO WM * CLR
TENON BRACKETSBKA-XNM-*-CLR - Tenon mount fitter slip-fits 2-3/8" O.D. tenon (2.0 pipe tenon). Drilled with 3” reduced drilling pattern.
BKA-XNM-S or D180-*-CLR BKA-XNM-D90, T90 or Q90-*-CLRSingle/D180 D90/T90/Q90
(Drilled 2 Sides) (Drilled 4 Sides)
INTERNAL SLIP-FITTER - Fits 4" (102mm) or 5" (127mm) SQI square steel poles with wall thickness of 11ga. (0.120"-3mm) or 7ga. (0.180"-5mm)
BKA-X4ISF-D180-*-CLR BKA-X4ISF-Q90-*-CLR BKA-X5ISF-D180-*-CLRBKA-X5ISF-Q90-*-CLR
RETROFIT BRACKETS - Mounting adaptor plates convert poles with existing 2-, 3-, and 4-hole LSI drilling patterns.
8" x 8"(203mm x 203mm)
BKS-XBO-ADP-2H-CLR - To convert 2-hole LSI drilling pattern used with Challenger, Greenbriar, etc. on round or square poles. Order Number 388239CLR
BKS-XBO-ADP-2H-CLR-EC6 - To convert 2-hole LSI drilling pattern and with 6" extension arm and proper hardware for use with round or square poles. Order Number 388241CLR
BKS-XBO-ADP-3H-CLR1 - To convert 3-hole LSI drilling pattern on square poles. Order Number 388059CLR
BKS-XBO-ADP-4H-CLR1 - To convert 4-hole LSI drilling pattern on square poles. Order Number 388060CLR
ROUND POLE PLATE - For mounting fixtures to round poles
Order NumberX4RPP - For 4" Round Poles 379967CLRX5RPP - For 5" Round Poles 379968CLR
FOOTNOTES:1- When ordering adaptors for 3- and 4-hole drilled square poles, ordering a replacementcap is also recommended due to the aging of the existing plastic pole cap.
BKS-XBO-ADP-4H-CLR4-3/4” x 3-3/4”
BKS-XBO-ADP-3H-CLR4-1/2” x 3-3/4”
BKS-XBO-ADP-2H-CLR5-9/16” x 2-5/8”
BKS-XBO-ADP-2H-CLR-EC6Mounting Bracket w/EC6 Arm
ARRAFunding Compliant
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
87
AR
EA
/ P
OL
ES
PASU/XAMU AREA LIGHT BRACKETS
FOOTNOTES:1- Slipfits 2-3/8" O.D. tenon (2.0 pipe tenon). Order N-tenon mount LSI poles.2- For mounting of fixtures with 3” reduced drilling pattern.
3- The bracket EPA should be added to the fixture EPA when selecting the proper pole.
BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteGPT - GraphiteSVG - Satin Verde GreenMSV - Metallic Silver
None
EC6 - w/extension arm
None
6”
*
*
*
*
*
*
*
EC - Extension
S - SingleD180˚-DoubleD90˚-DoubleT90˚-TripleQ90˚-Quad
D180˚-DoubleQ90˚-Quad
D180˚-DoubleQ90˚-Quad
WM-Wall Mount
2H - 2 Hole
2H - 2 Hole
3H - 3 Hole4H - 4 Hole
XBO-Bolt-On
XNM-Tenon Mount1
X4ISF-Internal Fitter
X5ISF-Internal Fitter
XBO-Bolt-On
XBO-ADP-PoleRetrofit Bracket
BKA – Bracket Aluminum
BKS – Bracket Steel
2/5
2/42/42/42/42/4
3/73/7
4/94/9
2/5
1/2
3/7
1/21/2
0.3
0.30.30.30.30.3
0.40.4
0.40.4
-
-
0.3
--
BRACKET ORDERING INFORMATIONBracket
DesignationBracket
TypeBracket
Configuration2Length OptionsBracket Finish EPA
Values3Estimated
Weight (kg/lbs.)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
88
AR
EA
/ P
OL
ES
AREA LIGHTING BRACKETS - BOLT-ONBOLT-ON BRACKETS
Note: Bolt-on parallel arms are designed for direct mounting of fixture to face of bracket. Standard arms not required, except for Hilton series.
2" x 8" x 40"(51mm x 203mm x 1016mm)
INTERNAL SLIP-FITTERBKA-4ISF-D180-*-CLRBKA-4ISF-Q90-*-CLRBKA-5ISF-D180-*-CLRBKA-5ISF-Q90-*-CLR
BKS-BO-WM-*-CLR: Wall Mount Plate for flat surfaced arm
BKS-BO-PA-40-CLR: Parallel Arm
BKA-BO-EC-6-CLR: Challenger & Patriot Extension Arm
For Challenger & Patriot OnlyFor Patriot Small order BKA-BO-PTS-EC-6-CLR
For Patriot Small order BKS-BO-PTS-WM-*-CLR
Fits 4" (102mm) or 5" (127mm) SQI square steel poles with wall thickness of 11ga. (0.120" - 3mm) or 7ga. (0.180" - 5mm).
8" x 8"(203mm x 203mm)
BKA-BO-ADJ-6-CLR: Adjustable 6"(152mm)Designed for direct mounting
of fixture to face of bracket. Standard arms not required.
Not compatible with certain fixtures. Consult factory.
For use with Square poles only.
BO-Bolt-On BracketBKA-BO-S-6BKA-BO-S-8BKA-BO-S-12
BKA-HRBO-S-6-CLR: Hilton II
BKA BO RA 8 CLR: Radius Arm for Challenger, Challenger II, Patriot Small, Patriot, and all Square and Rectangular Fixtures
Upsweep Bracket - BKU-BO-S-19
(457mm)18"
ARRAFunding Compliant
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
89
AR
EA
/ P
OL
ES
AREA LIGHTING BRACKETS - BOLT-ON
TYPICAL ORDER EXAMPLE:
BRACKET ORDERING INFORMATION
ROUND POLE PLATE – For mounting fixtures to round poles
BKA BO S 8 BRZ
BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteGPT - GraphiteSVG - Satin Verde GreenMSV - Metallic Silver
None6"
*
6"8"
12"
8"
6"
*
40"
19”
S – Single
D180° - DoubleQ90° - Quad
S – Single
RA – Single
ADJ – AdjustableEC - ExtensionPTS EC - Extension
WM – Wall MountPTS WM – Wall Mount
PA – Parallel Mount
S – Single
HRBO – Hilton II
4ISF - Internal Fitter5ISF - Internal Fitter
BO – Bolt-On
BO – Bolt-On
BKA – Bracket Aluminum
BKS – Bracket Steel
BKU – Upsweep Bracket Aluminum
–
0.40.4
–––
0.7
0.10.30.3
––––
2.9
0.4
FOOTNOTES:1- For mounting of fixtures with 5” traditional drilling pattern. 2 - The bracket EPA should be added to the fixture EPA when selecting the proper pole. BKA HRBO and BKA BO are already included in the fixture EPA.
BracketDesignation
BracketType
BracketConfiguration 1
Length OptionsBracket Finish EPA Values 2
RPP2 - ROUND POLE PLATE
RPPC - Challenger, Patriot, and Patriot Small only
Description Order NumberRPP2 – Round Pole Plate1
RPPC – Round Pole Plate - Challenger, Patriot, & Patriot Small1162914BLK141940CLR
SHIPPING WEIGHTS - Area Lighting Brackets (Bolt-on and Tenon Mount)Catalog Number Est. Weight (kg/lbs.) Catalog Number Est. Weight (kg/lbs.) Catalog Number Est. Weight (kg/lbs.)BKS-BO-WM-*BKS-BO-PTS-WM-*BKS-BO-PA-40BKS-NM-PA-40BKS-NM-RD-2.5/2BKS-NM-RD-3.0/2BKS-NM-RD-3.5/2BKU-BO-S-19BKA-HRBO-S-6BKA-BO-S-6
BKA-BO-S-8BKA-BO-S-12BKA-BO-EC-6BKA-BO-PTS-EC-6BKA-4ISF-D180BKA-4ISF-Q90BKA-5ISF-D180BKA-5ISF-Q90BKA-NM-S/D180
BKA-NM-T90/Q90BKS-RPT-TA-2.0+BKS-RPT-TA-2.5+BKS-RPT-TA-3.0+BKA-NM-ADJ+BKA-BO-ADJ+BKA-RNM-Q90+BKA-RNM-TN120+BKA-BO-RA-8BKA-NM-MA-5
2/52/5
17/3819/415/105/105/107/152/51/3
2/42/52/52/5 3/73/74/94/92/4
2/42/44/84/91/32/52/44/83/72/5
+Aluminum bolt-on brackets and tenon mounts are bulk-packed.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
90
AR
EA
/ P
OL
ES
Note: Tenon mount parallelarms are designed for direct mounting
of fixture to face of bracket. Standard armsnot required, except for Hilton Series.
2" x 8" x 40" (51mm x 203mm x 1016mm) Tenon Adaptor
Single/D-180(Drilled 2 Sides) Drilled 3 sides at 120°
D90/T90/Q90(Drilled 4 Sides)
BKS-NM-PA-40-CLR: Parallel Arm
BKA-NM-*-CLR: Tenon Mount Fitter BKA-RNM-TN120-CLR TENON MOUNT FITTER: For Radius Surface Brackets
BKA-NM-ADJ-*-CLR: Tenon Mount Adjustable(Direct mount of fixture to bracket- discard arm.) Not compatible with certain fixtures. Consult factory.
TENONREDUCERS*
P/N Description I.D. O.D. Fits 137096CLR BKS-NM-RD-2.5-CLR 3.068" (78mm) 3.5" (89mm) 2.875" (73mm)O.D.137093CLR BKS-NM-RD-3.0-CLR 3.640" (92mm) 4.0" (107mm) 3.5" (89mm)O.D.137090CLR BKS-NM-RD-3.5-CLR 4.140" (105mm) 4.5" (114mm) 4.0" (102mm)O.D.
9-3/4"(248mm)
POLE TOP ADAPTOR
For flat surface brackets
*Consult factory for other sizes.
P/N Description I.D. O.D. Fits 107073CLR BKS-RPT-TA-2 2.469" (63mm) 2.875" (73mm) 2.375" (60mm) O.D.107074CLR BKS-RPT-TA-2.5 3.068" (78mm) 3.5" (89mm) 2.875" (73mm) O.D.107075CLR BKS-RPT-TA-3 3.548" (90mm) 4.0" (102mm) 3.5" (89mm) O.D.
BKA-NM-MA-5-CLR: Mast Arm Adaptor(Cannot be used w/ Hilton Series) Slip fits 2” pipe (2-3/8” (60mm) O.D.)
Catalog Number EPA
BKS-BO-WM- *BKS-BO-PA-40BKS-NM-PA-40BKS-NM-RD-2.5/2BKS-NM-RD-3.0/2BKS-NM-RD-3.5/2BKA-HIBO-S-6+
BKA-HRBO-S-8+
-2.93.00.10.10.150.40.4
EstimatedWeight (lbs.)
5384110101045
Catalog Number EPA
BKA-BO-S-6+
BKA-BO-S-8+
BKA-BO-S-12+
BKA-BO-EC-6BKA-RBO-WM++
BKA-4ISF-D180BKA-4ISF-Q90BKA-5ISF-D180
0.40.40.70.3-
0.30.30.4
EstimatedWeight (lbs.)
44554779
Catalog Number EPA
BKA-5ISF-Q90BKA-NM-S/D180BKA-NM-T90/Q90BKS-RPT-TA-2.0++
BKS-RPT-TA-2.5++
BKS-RPT-TA-3.0++
0.40.30.30.10.10.1
EstimatedWeight (lbs.)
944489
Catalog Number EPA
BKS-NM-ADJ++
BKS-BO-ADJ++
BKA-RNM-Q90++
BKA-RNM-TN120++
BKA-BO-RA-8BKA-NM-MA-5
0.10.10.20.20.70.2
EstimatedWeight (lbs.)
354875
+ When ordered with fixture, bracket EPA included in fixture EPA.++Aluminum bolt-on brackets and tenon mounts are bulk-packed.
For Square fixtures, RPP2 is required
TENON BRACKETS
FOOTNOTES:1- For mounting of fixtures with 5” traditional drilling pattern.2- RNM requires RPP2 or RPPC.
3- 2.5", 3.0", 3.5" I.D. pipe size is reduced to standard size 2-3/8" O.D.4- The bracket EPA should be added to the fixture EPA when selecting the proper pole.
TYPICAL ORDER EXAMPLE: BKA NM S * BLK
BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteGPT - GraphiteSVG - Satin Verde GreenMSV - Metallic Silver
None40"
2.5/23
3.0/23
3.5/23
2.02.53.0
*
5
*
PA – Parallel Mount1
RD – Reducers
RPT-TA – Pole Top Adaptor
S – SingleD180°– DoubleD90°– DoubleT90°– TripleQ90°– QuadADJ – Adjustable
MA - Mast Arm Adaptor
TN120°– Triple
NM – Tenon Mount
–
NM – Tenon Mount1
RNM - Round Tenon Mount2
BKS – Bracket Steel
BKA – Bracket Aluminum
3.0
0.10.10.1
0.10.10.1
0.30.30.30.30.30.3
0.2
0.2
BRACKET ORDERING INFORMATIONBracket
DesignationBracket
TypeBracket
ConfigurationLength OptionsBracket Finish EPA Values 4
NOTE: Standard slip-fitter fits 2-3/8" O.D. tenon (2.0 pipe tenon)
SHIPPING WEIGHTS - Area Brackets
AREA LIGHTING BRACKETS - TENON MOUNT
ARRAFunding Compliant
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
91
AR
EA
/ P
OL
ES
FLOOD LIGHTING BRACKETS
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
92
AR
EA
/ P
OL
ES LSI ABOLITE POLE BRACKETS
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
93
AR
EA
/ P
OL
ES
POLE BRACKETS AND ACCESSORIES
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
94
BO
LL
AR
D &
IN
GR
OU
ND
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
Suitable for wet locations
ARRAFunding Compliant
LSI GREENLEE® LED INGROUND LIGHT (XIG)
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5400°K nominal) or Warm White (3200°K nominal) color temperature . 68CRI (nominal)
DRIVER CURRENT - Available in 350mA
OPTICS / AIMING - Available with 10°, spot, 25° or 40° flood horizontal beam angle distributions . Optics can be tilted +/- 15o from vertical via external aiming screw, with tamper-resistant spanner tool . Adjustment tool provided .
HOUSING - Composite rough-in housing never corrodes; field-proven to last for more than 20 years without maintenance . Luminaire housing is 85% copper alloy for wet locations or aluminum for damp/ dry locations . CNC precision machined to insure proper sealing .
DRIVER OVER CAPABILITY - 4,000 lbs . vehicle weight .
OPTICAL UNIT - 15mm low-iron tempered glass lens does not change color of light emitted . 19mm thick lens supplied with stainless steel trim option to retain flush surface . Sealed optical chamber is aimable from outside the unit to ensure integrity of the seal . No heat in the LED light beam means a cool lens - no risk of burns to bare feet . Optional slip resistant lens available, to enhance public safety .
INSTALLATION - Rough-in housing can be shipped ahead for pre-casting in concrete . Luminaire connects to field wiring via IP-68 rated connector .
ELECTRICAL - Universal frequency input (120 & 277V, 50/60 Hz) . Surge protection meets ANSI C62 .41 .2, Scenario 1, Location Category C-low standards (6,000; 3,000A)
DRIVER - State-of-the-art driver technology specifically designed for LSI LED fixtures provides unsurpassed system efficiency .
OPERATING TEMPERATURE - -40oC to +50oC ( -40oF to +122oF)
FINISH - Clear-anodized natural aluminum finish or LSI's DuraGrip® polyester powder coat finishes available . DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for a full five years . Standard colors include black, white, bronze, metallic silver, graphite and satin verde green . Natural brass matte blast finished .
TRIM - Optional 11” diameter x .18” thick stainless steel decorative trim has radial polish finish .
WARRANTY - LSI LED fixtures carry a limited 5 year warranty .
PHOTOMETRICS - Application layouts and photometric files are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com .
SHIPPING WEIGHT - XIGB - 28 lbs ., XIGA - 14 lbs .
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations .
US patent 8,152,334 and US & Int’l. patents pending
Not recommended for continuously immersed applications
IP68 3M
SP10 NFL25 FL40
LIGHT OUTPUT - XIGLumens (Nominal)# of LEDS
350 mA 19 2159 2076 2066 Watts 22 23 22
350 mA 19 1445 1485 1347 Watts 22 23 22
Cool
Whi
teW
arm
Whi
te
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
95
BO
LL
AR
D &
ING
RO
UN
DLSI GREENLEE® LED INGROUND LIGHT (XIG)
Prefix FinishColor
TemperatureDrive
Current
XIG B - Brass
A - Aluminum(Indoor or DampLocation Only)
RIH
LED 19 350 - 350 mA CW - Cool WhiteWW - Warm White
Input Voltage Distribution
UE- Universal Electronic(120-277V 50/60 Hz)
NB - Natural Brass1 NA - Natural Aluminum2 BRZ - Bronze BLK - Black WHT - White MSV - Metallic Silver GPT - Graphite SVG - Satin Verde Green
SP10 - 10° SpotNFL25 - 25° Narrow FloodFL40 - 40° Flood
Options
SST - Stainless Steel Trim3,4
TR - Tamper Resistant FastenersDSA - Directional Shield AluminumDSB - Directional Shield BrassRGA - Rock Guard AluminumRGB - Rock Guard BrassSRL - Slip Resistant Lens
Light SourceHousing # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XIG A LED 19 350 CW UE SP10 WHT SST
NOTES:1- Brass Housing Only2- Aluminum Housing Only
3- SST not avaiable with DS or RG options4- Aluminum housing painted BLK with SST. Brass housing NOT painted with SST. G34062
ACCESSORY ORDERING INFORMATION (Accessories are field installed)TRKEY - Key for TR Fasteners
9-1/2”(240mm)
2-1/2”(64mm)
1-1/4”(32mm) 2-1/2”
(64mm)
7-1/8”(181mm)
4-1/2” (114mm) Lens Opening
Side View
Rock Guard Stainless Steel Trim (SST)
OPTIONS
Directional Shield
Top View Bottom View
3/4-14 NPSM(2x) Conduit
Entries
8”(204mm)
7-3/4”(197mm)
6-1/8”(156mm)
DIMENSIONS
Rock Guard (RGA/B)
Lens/Lamp Protection
Directional Shield(DSA/B)
Increased Light Control
Stainless Steel Trim (SST)
Decorative Appeal
Slip Resistant Lens (SRL)
Enhance Public Safety
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
96
BO
LL
AR
D &
IN
GR
OU
ND
SMARTTEC™ ENERGY SAVING FEATURES:
DRIVER - State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency, control, and protection . Components are fully encased in potting material for IP68 moisture resistance . Driver complies with IEC and FCC standards .
OPTIONAL INTERNAL MOTION SENSOR - Doppler motion sensor activates switching of luminaire light levels . High level light is activated when passerby enters target zone and increased to full bright in 2-3 seconds . Low light level (30% of maximum drive current) is activated when target zone is absent of motion activity for 4 minutes and is gradually ramped down (7 seconds) to low level to allow eyes time to adjust . Sensor detection range is 360 degrees horizontal x average of 25' - 30' .
DUAL BEAM OPTICS - Utilizes two separate LED arrays to provide more uniform illumination - proprietary to LSI . Results in unprecedented fixture spacing, while providing great uniformity .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI website for specific guidance .
LEDS - 16 or 30 select high-brightness LEDs in Cool White (5400°K) or Neutral White (3800°K) color temperature, 70 CRI (nominal) .
REFLECTOR/DISTRIBUTION - 360° or 180° distribution .
EMERGENCY OPTIONS - Integral emergency battery-back-up options are available . BB option operates in 0°C to 60°C ambient temperature and CWBB operates in -20°C to 60°C ambient temperature . When primary AC power failure occurs, both options battery operate 10 LEDs in upper ring aperture for a minimum of 90 minutes and exceed NFPA-Life Safety Code requirements for means of egress lighting .
LOWER HOUSING - One-piece, heavy-walled, extruded aluminum, .322” thick for vandal resistance . Various heights are available in 6” increments starting at 30” (maximum height is 60”) . Lower housing attaches to cast aluminum base plate with four stainless steel roll pins .
CROWN ASSEMBLY - Flat or domed, heavy cast aluminum . For added security against vandals, crown attaches to lower housing with four captive, concealed ¼” x 20 Allen-head screws .
LENS - 2 one piece heavy walled borosilicate lenses are recessed .764” and protected by three cast ribs for vandal resistance . Exposed portion of top lens is only .934” tall with the lower lens being only 1 .831” tall .
BASE PLATE - Extra thick, ½” cast T6 treated aluminum base is conversion coated and black powder coated for corrosion resistance .
OPTIONAL ROUGHNECK REINFORCEMENT - .375” thick zinc plated, steel base plate with welded U shaped reinforcement . 3/8” diameter 302 stainless steel roll pins with 10,000 lb . shear load .
ANCHOR BOLTS - Anchor bolts are 3/8”x10” long heavy duty galvanized steel . Four (4) are furnished .
ELECTRICAL - Universal voltage power supply (120-277 VAC 50/60HZ) . 347-480V also available . 350 mA standard . Surge protector meets IEEE C62 .41 .2-2002, Scenario 1 Location Category C .
OPERATING TEMPERATURE - -40°C to +50°C(-40°F to +122°F) .
FINISH - Each fixture is finished with LSI's DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five years . Standard colors include bronze, black, platinum plus, white, graphite, satin verde green, and metallic silver .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting.apps@lsi-industries.com .
SHIPPING WEIGHT - 50 lbs .
LISTING - Listed to U .S . and Canadian standards . Suitable for wet locations .
LSI GREENLEE® LED SPEC GRADE BOLLARD (XHYP3) US & Int’l. patents pending
Suitable for wet locations
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
Lumens Watts Lumens Watts
LIGHT OUTPUT - XHYPFull Output Low Output# of LEDSDescription
301610
1690950748
342020
692401—
127—
XHYP3-360 XHYP3-180 XHYP3-360-30-BB
350mA - Standard
301610
1599856—
3420—
———
———
XHYP3-360 XHYP3-180 XHYP3-360-30-BB
Neut
ral W
hite
Cool
Whi
te
IP65ARRAFunding Compliant
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
97
BO
LL
AR
D &
ING
RO
UN
D
Prefix
XHYP3 - LED Hyperion
LED 30
16
350 - 350mA UE - Universal Electronic(120-277)
347-480
BRZ - BronzeBLK - BlackPLP - Platinum PlusWHT - WhiteGPT - GraphiteSVG - Satin Verde GreenMSV - Metallic Silver
# ofLEDS
NW - Neutral WhiteCW - Cool White
360°
180°
Color TempDrive
CurrentDistributionLight
Source
FT - Flat TopDT - Dome Top
TopInput Voltage Finish
TYPICAL ORDER EXAMPLE:
PRODUCT ORDERING INFORMATION
XHYP3 360 LED 350 NW UE BRZ FT IMS
Options
1- Standard height is 42" for FT and 45" for DT. Non-standard heights are available in 6" increments. Minimum height is 30". Maximum height is 60". 2- Not available with 180° Distribution 3- Battery Backup & Cold Weather Battery Backup minimum height is 36" 4- Battery Backup & Cold Weather Battery Backup is only available in 120 -277v.5- Rough Neck option must be entered at time of original order. Can’t be switched in field.6- Not CE marked.
H - XX (Specify Height)1
GFR - GFI Duplex ReceptacleLAB - Less Anchor BoltsIMS - Integral Motion Sensor6
PCI 120 - 120v Button Type PhotocellPCI 208-277 - 208 - 277v Button Type PhotocellPCI 347 - 347 Button Type PhotocellRN - RoughNeck Heavy Duty Mtg. Plate5
BB - Battery Backup2, 3, 4
CWBB - Cold Weather Battery Backup 2, 3, 4
LPC - Lens Protector Casting painted black
ACCESSORIESABKIT - Anchor Bolt Kit (BVR) 3/8" x 10" - Galvanized
LSI GREENLEE® LED SPEC GRADE BOLLARD (XHYP3)
8-1/2”
5-5/16” 5-5/16”
42” 44-1/2”1-13/16”
1-13/16”
30”30-1/8”
15/16”15/16”
Note: Base plate dimensions may change without notice. Do not use for setting anchor bolts. Consult factory for base plate templates.
Anchor Bolt3/8" X 10"
1.5" (38mm)Bolt Projection
Bolt Circle 6" Maximum(114mm)
Maximum Bolt Circle is 6"Standard (Minimum)
Bolt Circle is 4.5"
ConduitOpening3" (76mm)
BASE DETAIL
DIMENSIONS8-1/2”
5-5/16” 5-5/16”
42” 44-1/2”1-13/16”
1-13/16”
30”30-1/8”
15/16”15/16”
Note: Base plate dimensions may change without notice. Do not use for setting anchor bolts. Consult factory for base plate templates.
Anchor Bolt3/8" X 10"
1.5" (38mm)Bolt Projection
Bolt Circle 6" Maximum(114mm)
Maximum Bolt Circle is 6"Standard (Minimum)
Bolt Circle is 4.5"
ConduitOpening3" (76mm)
BASE DETAIL
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
98
BO
LL
AR
D &
IN
GR
OU
ND
Suitable for wet locations
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - An array of 24 select high-brightness LEDs in Cool White (5200°K), Warm White (3300°K) or Neutral White (4100°K) color temperature, 69 CRI (nominal)
REFLECTOR/DISTRIBUTION - Indirect . Photometric data is tested in accordance to IESNA Procedures .
HOUSING - Crown: Virtually tamper-proof concealed stainless steel fasteners in the cast aluminum crown assembly .
Lower Housing: One-piece, .322 inch seamless, extruded aluminum . Various heights are available in 6” increments starting at a minimum of 30” (maximum height is 60”) . Lower housing attaches to cast aluminum base plate with four stainless steel roll pins .
OPTIONAL ROUGHNECK REINFORCEMENT - .375” thick zinc plated, steel base plate with welded U shaped reinforcement . 3/8” diameter 302 stainless steel roll pins with 10,000 lb . shear load .
LENS/GASKET - One-piece, clear acrylic lens enclosure fully gasketed at top and bottom edge .
ANCHOR BOLTS - Requires four heavy-duty 3/8” x 10” galvanized steel anchor bolts .
ELECTRICAL - Universal voltage power supply (120-277 VAC, 50/60 Hz) . 347-480V also available - 400mA is standard . Surge protector meets IEEE C62 .41 .2-2002, Scenario 1 Location Category C .
DRIVER - State-of-the-art driver technology designed specifically LSI LED light sources provides unsurpassed system efficiency . Driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Each fixture is finished with LSI’s DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard colors include bronze, black, platinum plus, buff, white, graphite, satin verde green and metallic silver .
DECAL STRIPING - Color-coordinated decal is available in 9 standard decal colors or by custom order from a selection of hundreds . Decal is guaranteed for five years against peeling, cracking, or fading .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting.apps@lsi-industries.com .
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations . DLC - not all possible distributions are DLC approved . Please refer to LSI or DLC web site for specific listings .
LED BOLLARD LIGHT (XBVRD)
Also available in traditional light sources
U.S. and international patents pending
ARRAFunding Compliant
42" standard(1067mm)
8-5/8"(219mm)
DIMENSIONS
Catalog # Est. Weight (kg/lbs.) Length (mm/in.) Width (mm/in.) Height (mm/in.)XBVRFXBVRD
Anchor Bolts (3/8" x 10")
25/5625/561/set1/2
1318/51.8751318/51.875
-
311/12.25311/12.25
-
251/9.875 251/9.875
-
SHIPPING WEIGHTS - LED Bollard
Dome-Top
Note: Base plate dimensions may change without notice. Do not use for setting anchor bolts. Consult factory for base plate templates.
Anchor Bolt3/8" X 10"
1.5" (38mm)Bolt Projection
Bolt Circle 6" Maximum(114mm)
Maximum Bolt Circle is 6"Standard (Minimum)
Bolt Circle is 4.5"
ConduitOpening3" (76mm)
BASE DETAIL
Lumens Watts
LIGHT OUTPUT - XBVR Output# of LEDSDescription
1338
1224
856
24
24
24
38
38
38
Cool WhiteXBVR ID
Neutral WhiteXBVR IDWarm WhiteXBVR ID
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
99
BO
LL
AR
D &
ING
RO
UN
D
Prefix
XBVRF Flat-Top XBVRD Round-Top
LED - Light Emitting Diode
24 UE - Universal Electronic (120-277V 50/60Hz)
347 - 347 volt
480 - 480 volt
BRZ - BronzeBLK - BlackPLP - Platinum PlusBUF - BuffWHT - WhiteGPT - GraphiteSVG - Satin Verde GreenMSV - Metallic Silver
# of LEDS
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
400ID - Indirect
Color TempDrive CurrentDistribution Light Source Line Voltage Finish
TYPICAL ORDER EXAMPLE:
PRODUCT ORDERING INFORMATION
XBVRF ID LED 24 400 CW UE BRZ 45
Options
1 - Taller or shorter heights available in 6" increments. Minimum height is 30". Maximum height is 60".
285560122510
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
ABKIT - Anchor Bolt Kit (BVR) 3/8" x 10" - GalvanizedHSS - Round House Side Shield
Description Order Number
H - XX (Specify Height) 1 PCI120 - Button-type Photocell PCI208, 240,277 - Button-type Photocell PCI347 - Button-type PhotocellGFR - GFI Duplex Receptacle LAB - Less Anchor BoltsRN - Roughneck Heavy Duty Mounting Plate
Color Decals 45 - Light Gold 20 - Charcoal Metallic 55 - Black 94 - Blue Black 59 - Dark Green 51 - Dark Red 21 - Tomato Red 50 - White 700 - Aztec Silver Metallic
LED BOLLARD LIGHT (XBVRD)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
100
EX
TE
RIO
R C
EIL
ING
/S
OF
FIT
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
HOUSING – High impact resistant, reinforced polyester, fiberglass housing . IP65, Vaportight design is available in 4’ lengths .
LENS – Standard injection molded optically diffused lens, with impact resistant acrylic for strength, secured by 8 locking polycarbonate latches . Optional clear lens is available . Additional choices of stainless steel or Tamper resistant latches are also available .
GASKET – A continuous, compressible, non toxic, fire –retardant closed cell neoprene gasket is used . It provides a uniform width and thickness for a tight IP65 seal between the housing and lens .
GEAR TRAY – Components are mounted to a code-gauge, die-formed steel tray .
BREATHER – Features special breather design in the housing to prevent internal pressuresand vacuums to ensure long-life seal and component integrity .
LEDS – Features a choice of an array of select, mid-power, high brightness, high efficiency LED chips; CW - 5100oK color temperature, 70 CRI (nominal) or NW - 4100oK color temperature, 80 CRI (minimal) or WW - 3500oK color temperature, 80 CRI (nominal) .
OPTICS / DISTRIBUTION – High performance distribution provides excellent uniformity and meets IES RP-20 and IES G-1 .
DRIVER– State-of-the-art driver technology superior energy-efficiency and optimum light output . Driver is IP66 rated, for moisture resistance . Complies with IEC and FCC standards . Surge protected at 10KV . 0-10v dimming drivers are supplied as standard . Controls by others .
OPERATING TEMPERATURE - 20oC to 35oC
ELECTRICAL – Universal voltage power supply, 120-277 VAC, 50/60 HZ input . All devices are UL/CUL listed . Optional emergency pack, cords and conduits are available . Meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH – All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Interior housing reflective surfaces are finished with white, high reflectance (minimum 92%) polyester powder .
MOUNTING – Designed for standard surface mounting . Optional heavy duty mounting bracket available for vandal prone areas .
EXPECTED LIFE – Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (IN CARTON) - 17 lbs . (7 .7 Kg)
LISTING - UL listed to UL 1598, UL8750 and other U .S . and International safety standards . Suitable for wet locations .
LED LINEAR PARKING GARAGE (XLPG)
Cool WhiteNeutral WhiteWarm White
Cool WhiteNeutral WhiteWarm White
LIGHT OUTPUT - XLPG
Clea
r Len
s
Lumens
9200
7721
8515
9761
8293
9045
89
89
89
89
89
89
103
87
96
110
93
102
Watts LPW
Diffu
sed
Lens
IP65 NSFwet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
101
EX
TE
RIO
R C
EIL
ING
/S
OF
FIT
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XLPG LED VHO CW UE WHT HMB HUB 6FCT
REPLACEMENT PARTS ORDERING INFORMATION (field installed)
DIMENSIONS
HMB Option
Description Order Number
Surface Mounting Bkts (Pair) M15212Diffused Lens 504417Clear Lens 404733
Prefix FinishColorTemperature
XLPG LED Linear Parking Garage
LED CW - Cool WhiteNW - Neutral WhiteWW - Warm White
FOOTNOTES:1. 0-10v dimming driver supplied as standard. Additional leads supplied for connection to controls.
Input Voltage
UE - UniversalVoltage
(120-277V)
347 - 347V
WHT - White
OptionsLightSource
VHO - Very High Output
DriveCurrent
EMDL -Emergency Pack (Damp Location)OCS - Occupancy Sensor (Damp Location)OCWL - Occupancy Sensor (Wet Location)DIM - 0-10v Dimming1
SL - Stainless Steel LatchesTP - Tamper Resistant Latches & ScrewsHUB - 3/4 NPT threaded hub installed CenterbackHMB - Heavy Duty Mounting BracketsCLR - Clear Lens6CT - 6' Cord - Top Mount (damp location)6CE - 6' Cord - End Mount (damp location)6FCT - 6' Flex Conduit - Top Mount (wet location)6FCE - 6' Flex Conduit - End Mount (wet location)
36” (914mm)
5-7/8”(149mm)
31-1/2” (+/-3”)(800mm [+/- 76mm])
7-1/4”(184mm)
7-1/4”(184mm)
51-7/8”(1381mm)
51-7/8”(1381mm)
7-7/8”(201mm)
LED LINEAR PARKING GARAGE (XLPG)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
102
EX
TE
RIO
R C
EIL
ING
/S
OF
FIT
SMARTTEC™ ENERGY SAVING FEATURES:THERMAL CONTROL - Sensors in both the optical unit and driver enclosure reduce drive
current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until recommended operating temperature is reached .
OCCUPANCY SENSING (IMS) - Optional internal passive infrared motion sensor activated switching of luminaire light levels . High level light is activated when automobile or passerby enters sensor target zone . High light level is increased to full bright in 1-2 seconds upon detection . Low light level (30% of maximum drive current) is activated when target zone is absent of motion activity for ~ 2 minutes . Upon inactivity, light level is gradually ramped down (10-15 sec .) to low level to allow eyes time to adjust . Two sensor detection optics are available . The wide optic has a coverage range of 40 feet diameter at mounting heights of 8 feet to 12 feet . The narrow optic has a coverage range of 20 feet diameter at a mounting height of 8 feet to 12 feet .
DIMMING (DIM) - 0-10 volt dimming enabled, with controls by others .BI-LEVEL SWITCHING (BLS) - Bi-level switching responds to external line voltage signal
from separate controller or sensor (by others), with low light level decreased to 30% maximum drive current .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Two LED array choices; 50 and 68 . Each feature high-brightness LEDs in Cool White (5300°K) or Neutral White (4100°K) color temperature, 70 CRI (nominal) .
DRIVER CURRENT OPTIONS - Available in 350mA, 450mA or 550mA drive currents . DISTRIBUTION/PERFORMANCE - Ultra-high efficiency reflectors provide solid performance
for typical spacings and heights, exceptional uniformity with vertical illumination and full cutoff . Ideal when maximum spacing is desired without sacrificing desired lumen levels . Meets RP20 recommendations while delivering unique control of distribution to minimize glare . Optional diffused lens available to reduce visibility of diodes .
HOUSING/OPTICAL UNIT - The XPG3 features a slim 7-1/8” profile . Housing is die-formed aluminum with a gasketed clear flat tempered glass lens providing a water-resistant seal . Weather-tight aluminum enclosure contains factory prewired driver to ensure no water entry and to eliminate need to open fixture completely . Optical unit is IP67 rated .
MOUNTING - Not intended for recessed mounting in enclosed ceilings . Standard mounting is rigid 3/4” pendant mount or direct surface mount to 4” (102mm) octagon box (box by others) . Pendant and direct mount standard with 48” leads and 8” leads respectively . Direct mount features standard quick mount plate with elongated key hole slots to allow alignment of fixtures .
ELECTRICAL - Universal voltage power supply (120-277 VAC, 50/60 Hz) . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C . Emergency LED battery back-up/driver operates 10 LEDs for a minimum of 90 minutes when primary AC power failure occurs .
DRIVER - Proprietary, state-of-the-art SmartTec driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Driver will operate with input of 120V thru 277V (50/60 Hz) . LSI components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .FINISH - Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing
process . DuraGrip withstands extreme weather changes without cracking or peeling . Guaranteed for five full years . Standard colors are white, black and metallic silver .
WARRANTY - Limited 5-year warranty .PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications
Group at lighting .apps@lsi-industries .com .SHIPPING WEIGHT - Standard fixture 21 lbs . (9 .5 kg) . Fixtures with battery back-up 28
lbs . (13 kg)LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED GEN3 PARKING GARAGE LIGHT (XPG3)US patent D603081 & D611188 & 7828456 and US & Int’l. patents pending
Not all versions of this product are CE certified.
This product, or selected versions of this product, meet the standards listed below. Please consult
factory for your specific requirements.
Type 5 Type S
Cool
Whi
teNe
utra
l Whi
te
LIGHT OUTPUT - XPG3Lumens (Nominal)
# of LEDS Watts471858145743708266568397424556955137691959507875
506850685068506850685068
6187751276069580895210712599870517313858484569880
56757398901255675739890125
350 mA
450 mA
550 mA
350 mA
450 mA
550 mA
ARRAFunding Compliant
Suitable for wet locations
enabled
enabled
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
103
EX
TE
RIO
R C
EIL
ING
/S
OF
FIT
LED GEN3 PARKING GARAGE LIGHT (XPG3)
Prefix FinishColorTemperature
XPG3DDirect Mount
XPG3PPendant Mount
LED 5068
CW - Cool White(5300º K nom.)
NW - Neutral White(4100º K nom.)
Input Voltage
UE - Universal Electronic (120-277)
347 - 347 volt
480 - 480 volt
WHT - WhiteBLK - BlackMSV - Metallic Silver
Sensor/OptionsOptional ControlsLightSource
Distribution # ofLEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XPG3P 5 LED 68 450 CW UE WHT
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
BGXPG PCS5
C/F6
C/F6
Bird GuardPolycarb SheildROSB120 - WL Remote Box with 120V Occupancy SensorROSB277 - WL Remote Box with 277V Occupancy Sensor
Description Order Number Order Number
FOOTNOTES:1 - IMS, DIM and BLS are not compatible.2 - Do not specify for satellite units. 3 - Not compatible with Virtinet wireless systems,
DIM or BLS
350 - 350mA450 - 450mA550 - 550mA
DriveCurrent
SensorES2 - External SensorIMSW - Integral Motion Sensor
Wide3
OptionsBB - Battery BackupCWBB - Cold Weather BBDFL - Diffused Lens4
C/F6
C/F6
RPSB120 - WL Remote Box with 120V External PhotocellRPSB208-277 - WL Remote Box with 208-277V External Photocell
Description
5 - Type 5S - Symmetric
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM - 0-10V Dimming (from external signal)1
BLS - Bi-level Switching (from external signal)1
4 - Diffused lens reduces light output. Consult factory.5 - Polycarb sheild not available with IMS.6 - Includes VCM. To be used in conjunction with VCM options in fixture. Consult factory.
BOTTOM VIEW
POLYCARB SHIELD
SIDE VIEW SIDE VIEW
DIMENSIONS
7-1/8”(183mm)8”
(203mm)
5/8”(16mm)
16-1/2”(419mm)
16-1/2”(419mm)
2-1/2”(63mm)
4-1/8”(105mm)
7-1/8”(183mm)8”
(203mm)
5/8”(16mm)
2-1/2”(63mm)
Optional IMS
1-3/16”(30mm)
7”(178mm)
13-3/8”(339mm)
13-3/8”(339mm)
16-3/8”(416mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
104
EX
TE
RIO
R C
EIL
ING
/S
OF
FIT
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs . Cool White 5000°K color temperature, 69 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Type S (Symmetric) or 5A (Type 5) . Excellent uniformity with Bug rating of BU-UO-G1 . Optional diffused lens available to reduce visibility of diodes
HOUSING/OPTICAL UNIT - Housing is die-formed aluminum with a gasketed clear tempered glass lens providing a water-resistant seal . Weather-tight aluminum enclosure contains factory prewired driver to ensure no water entry . Sealed optical unit containing LEDs rated IP67 .
MOUNTING - Direct mounts with screws through the trim frame (standard) . Optional channel bar kit available to suspend assembly from ceiling joists . 12” clearance required for ease of installation .
ELECTRICAL - Universal frequency power supply (50/60 Hz) . Supply voltage must be specified for pre-wired thermal protectors .
DRIVER - State-of-the-art driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Driver will operate with input of 120/208/240/277V (50/60 Hz) . Components are fully encased in potting material for moisture resistance . Driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Each fixture is finished with LSI’s DuraGrip® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years . Standard color is white .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
LISTING - Listed to U .S . and Canadian safety standards . Suitable for damp locations .
US patents D574994 & D595896 & 7828456 and US & Int’l. patents pending
LED SOFFIT LIGHT (XSL2)
Crossover® LED Lighting
495762.2
79
69
5100 (Daylight)
KGGN-EDE2GE
XSL2-S-LED-50-CW-UE
Surface and pendant-mounted downlights
SS - Super Saver 6,193 60 103HO - High Output 8,348 86 97SS - Super Saver 5,158 60 86HO - High Output 6,959 86 81
Diffused Lens
SS - Super Saver 5,752 60 96HO - High Output 6,751 87 78SS - Super Saver 4,393 60 73HO - High Output 5,842 87 67
LIGHT OUTPUT - XSL2Clear Lens Lumens Watts LPW
Type
STy
pe 5
ATy
pe S
Type
5A
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
damp locationARRAFunding Compliant
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
105
EX
TE
RIO
R C
EIL
ING
/S
OF
FIT
LED SOFFIT LIGHT (XSL2)
Prefix
XSL2 - Soffit Light LED 50 120208240277347
WHT - White
# ofLEDs
CW - Cool White (5000º K nom.)
S - Symmetric5A - Type 5
Color TemperatureDistribution Light Source
HO - High OutputSS - Super Saver
Drive Current Input Voltage Finish
TYPICAL ORDER EXAMPLE:
PRODUCT ORDERING INFORMATION
XSL2 S LED 50 SS CW 120 WHT CMT
CMT - Channel Bar Mounting Kit
DM - Direct MountDFL - Diffused Lens
Options
TOP VIEW SIDE VIEW(Channel Mount Shown)
SHIPPING WEIGHT - 14 lbs. (6.4kg)
8-1/4"(210mm)
18" (457mm)
18" (457mm)
18"(457mm)
15-1/4 - 15-1/2" Square(387mm - 394mm)
(Direct Mount)
151/2- 16-3/4" Square(394mm - 425mm) (C-Channel Mount)
DIMENSIONS
12" CLEARANCE REQUIREDFOR EASE OF INSTALLATION
Cutaway View
2-5/16” - 6-5/8”(58 - 168 mm)
Minimum-Maximum Clamping Height
C-Channel
Hanging Bracket
Trim Ring
Hinge
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
106
EX
TE
RIO
R C
EIL
ING
/S
OF
FIT
LED 6 INCH WET-LISTED DOWNLIGHT (PDL6K)
HO - High Output
Prefix Color Temp Line VoltageLight Source Lumen Output
PDL6K - 6" Downlight(Module & housing)
LED NW - Neutral White (4000K)WW - Warm White (3000K)
120 - 120 VAC
Reflector FInish
SD - Semi-diffused
TYPICAL ORDER EXAMPLE: PDL6K LED HO NW 120
ORDERING INFORMATION
LEDs - Select high-brightness LEDs . Color temperature 4000K (NW, nominal) or 3000K (WW) . CRI = 90 (nominal)
REFLECTOR - High quality aluminum spun reflector has semi-diffuse finish . Self flange white trim is standard .
HOUSING - Housing is made from cast and machined aluminum (6061-T6 alloy) .Mounting bracket formed #304 stainless steel . Hardware is stainless steel .
DIMMING - Works with standard leading- and trailing-edge technologies down to 5% and 10% respectively . Contact factory for compatibility with Lutron, Leviton other manufacturers products .
DIMENSIONS
7-1/2”
6-3/8”
7-1/4”
11”
5-11/16”Module Only
Assembled in Housing
7-5/16” 3-1/2”
3-1/2”
Suitable for wet locations
ARRAFunding Compliant
MOUNTING - Torsion springs safely secure LED trim and module in housing
INPUT POWER - 14 watts at 120 VAC
DELIVERED LUMENS - 831
EXPECTED LIFE - Minimum 50,000 hours .
WARRANTY - Limited 5-year warranty .
LISTING - Wet location . ETL listed to U .S . and Canadian safety standards .
PHOTOMETRICS - LM-79 and LM-80 reports, as well as application layout assistance are available on request . Contact LSI Applications Group or lighting .apps@lsi-industries .com .
Project Name
Catalog #107
THIS PAGE LEFT INTENTIONALLY BLANK
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
108
WA
LL
MO
UN
T
SMARTTEC™ ENERGY SAVING FEATURES:
THERMAL CONTROL - Sensors in both optical and driver enclosure reduce driver current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
OPTIONAL INTEGRAL MOTION SENSOR - Passive infrared motion sensor activates switching of luminaire light levels . High level light is activated when passersby enter target zone and increased to full bright in 1-2 seconds . Low light level (30% of maximum drive current) is activated when target zone is absent of motion activity for 5 minutes and is gradually ramped down (10 seconds) to low level . Sensor detection range 110° horizontal x 93° vertical x 10 meters maximum distance .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Available with 28 or 48 select high-brightness LEDs in Cool White (5300°K nominal) or Neutral White (4200°K nominal) color temperature, 70 CRI (nominal) .
OPTICS/DISTRIBUTIONS - Ultra-high efficiency reflectors provide three distributions . Choose from Wide Throw (WT), Forward Throw (FT) or Wall Wash (WW) .
HOUSING - The aerodynamic aluminum housing is a rectangular shape . All mounting hardware is stainless steel or electro-zinc plated steel . Housing and optical unit are sealed with extruded silicone gasket; supply conductors with molded EPDM bushing .
OPTICAL UNIT - Clear tempered optical-grade flat glass lens sealed to the aluminum optic housing creates an IP67 rated unit . Pressure stabilizing breather allows super-tight protection while preventing cycling from building up internal pressures and vacuums that can stress optical unit seals .
WALL MOUNTING - Galvanized-steel universal wall mounting plate easily mounts directly to 4” octagonal or square junction box . EPDM gasket is supplied to be installed between mounting plate and junction box, sealing junction box from entrance of water . Universal plate permits fixture to be mounted in uplighting (indoor only) or downlighting position .
POLE MOUNTING - XPMA (for square) or XPMAR (for round) allows mounting to poles in single and D180 configurations . Use with 3” reduced drilling pattern .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input) or 347-480VAC .
DRIVER - Available in 350mA and 450mA drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards . Driver can be easily accessed and removed .
EMERGENCY OPTIONS - Integral emergency battery-back-up options are available . BB option operates in 0°C to 60°C ambient temperature and CWBB operates in -20°C to 60°C ambient temperature . When primary AC power failure occurs, both options operate 10 LEDs for minimum of 90 minutes .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
FINISH - LSI's DuraGrip® polyester powder coat finishing process withstands extreme weather changes without cracking or peeling . Guaranteed for five full years .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 30 lbs ./13 .6Kg
LISTING - ETL listed to ANSI/UL1598 . UL8750 and other U .S . and international safety standards . Suitable for wet locations in downlight position .
LED CHALLENGER® WALL SCONCE (XCHWM3)US patent 7828456, 8002428 and CAN 2736757 & 2736757 and MX patent 29631 and ISRL 49679 and AUS 2008312668 and US & Int’l. patents pending
LIGHT OUTPUT - XCHWM3Distribution/Lumens (Nominal)
Type FT Type WT Type WW Watts
Cool
Whi
te
450 m
A 3
50 m
ANe
utra
l Whi
te
450 m
A 3
50 m
A
28 2876 2902 3032 34 48 4855 4931 5038 55 28 3522 3542 3720 44 48 5900 5972 6115 72
28 2787 2792 2898 34 48 4553 4660 4580 55 28 3377 3369 3517 44 48 5453 5562 5452 72
Milliamps # of LEDs
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
109
WA
LL
MO
UN
TLED CHALLENGER® WALL SCONCE (XCHWM3)
Prefix FinishColor Temperature
XCHWM3 - LED Challenger Wall
Sconce
LED 2848
CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
OptionsLight SourceDistribution # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XCHWM3 FT LED 48 450 CW UE WHT BB
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
XCHWM3 PLS - Polycarbonate Shield 172787XCHWM3 SW BLK - Surface Wiring Box 173156BLK+SCD - Tamper-proof Screwdriver 477974FK120 - Single Fusing FK120++FK277 - Single Fusing FK277++DFK208, 240 - Double Fusing DFK208,240++DFK480 - Double Fusing DFK480++FK347 - Single Fusing FK347++
Description Order Number
NOTES:1 - Available with UE voltage only 2- Designed with 3" reduced drilling pattern. For S or D180 mounting configuration only. 3- Tamper-proof Screwdriver must be ordered separately. (See Accessory Ordering Information.)
350 - 350mA450 - 450mA
Drive Current
BB - Battery Back-up1
CWBB - Cold Weather Battery Back-up1
IMS - Integral Motion SensorPCI120 - 120V Button Type PhotocellPCI208 - 208V Button Type PhotocellPCI240 - 240V Button Type PhotocellPCI277 - 277V Button Type PhotocellPCI347 - 347V Button Type PhotocellXPMA - Pole Mount Adaptor for use with Square Pole (for single or D180 mounting configuration only)2
XPMAR - Pole Mount Adaptor for use with Round Pole (for single or D180 mounting configuration only)2
TP - Tamper Proof3
WT - Wide Throw
FT- Forward Throw
WW - Wall Wash
NOTES:+SW BLK not compatible with XPMA or XPMAR option. Available in black only.++Fusing to be installed in a compatible junction box supplied by contractor.
DIMENSIONS
13-1/2"(343 mm)
11"(279 mm)
20"(508 mm)
8-5/8"
8-5/8"
(219 mm)
30°
Universal Mounting Plate
J-BOX CENTERLINE
3-7/8"(98 mm)
15-3/8"(390 mm)
11"(279 mm)
20"(508 mm)
3"(76 mm) (219 mm)
Shown with IMS option
J-BOX CENTERLINE
3-7/8"(98 mm)
7 3/4"(197 mm)
5 11/16"(145 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
110
WA
LL
MO
UN
TLED GREENBRIAR® WALL SCONCE (XGBWM3)
SMARTTEC™ ENERGY SAVING FEATURES:
THERMAL CONTROL - Sensors in both optical and driver enclosure reduce driver current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
OPTIONAL INTEGRAL MOTION SENSOR - Passive infrared motion sensor activates switching of luminaire light levels . High level light is activated when passersby enter target zone and increased to full bright in 1-2 seconds . Low light level (30% of maximum drive current) is activated when target zone is absent of motion activity for 5 minutes and is gradually ramped down (10 seconds) to low level . Sensor detection range 110° horizontal x 93° vertical x 10 meters maximum distance .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Available with 28 or 48 select high-brightness LEDs in Cool White (5300°K nominal) or Neutral White (4200°K nominal) color temperature, 70 CRI (nominal) .
OPTICS/DISTRIBUTIONS - Ultra-high efficiency reflectors provide three distributions . Choose from Wide Throw (WT), Forward Throw (FT) or Wall Wash (WW) .
HOUSING - The aerodynamic aluminum housing is a rectangular shape . All mounting hardware is stainless steel or electro-zinc plated steel . Housing and optical unit are sealed with extruded silicone gasket; supply conductors with molded EPDM bushing .
OPTICAL UNIT - Clear tempered optical-grade flat glass lens sealed to the aluminum optic housing creates an IP67 rated unit . Pressure stabilizing breather allows super-tight protection while preventing cycling from building up internal pressures and vacuums that can stress optical unit seals .
WALL MOUNTING - Galvanized-steel universal wall mounting plate easily mounts directly to 4” octagonal or square junction box . EPDM gasket is supplied to be installed between mounting plate and junction box, sealing junction box from entrance of water . Universal plate permits fixture to be mounted in uplighting (indoor only) or downlighting position .
POLE MOUNTING - XPMA (for square) or XPMAR (for round) allows mounting to poles in single and D180 configurations . Use with 3” reduced drilling pattern .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input) or 347-480VAC .
DRIVER - Available in 350mA and 450mA drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards . Driver can be easily accessed and removed .
EMERGENCY OPTIONS - Integral emergency battery-back-up options are available . BB option operates in 0°C to 60°C ambient temperature and CWBB operates in -20°C to 60°C ambient temperature . When primary AC power failure occurs, both options operate 10 LEDs for minimum of 90 minutes .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
FINISH - LSI's DuraGrip® polyester powder coat finishing process withstands extreme weather changes without cracking or peeling . Guaranteed for five full years .
DECAL STRIPING - Optional color-coordinated decals in 9 standard colors to accent the fixture . Decals are guaranteed for five years against peeling, cracking, or fading .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 31 lbs ./14Kg
LISTING - ETL listed to ANSI/UL 1598 . UL8750 and other U .S . and international safety standards . Suitable for wet locations in downlight position .
US patent 7828456, 8002428 and CAN 2736757 & 2736757 and MX patent 29631 and ISRL 49679 and AUS 2008312668 and US & Int’l. patents pending
LIGHT OUTPUT - XGBWM3Distribution/Lumens (Nominal)
Type FT Type WT Type WW Watts
Cool
Whi
te
450 m
A 3
50 m
ANe
utra
l Whi
te
450 m
A 3
50 m
A
28 2876 2902 3032 34 48 4855 4931 5038 55 28 3522 3542 3720 44 48 5900 5972 6115 72
28 2787 2792 2898 34 48 4553 4660 4580 55 28 3377 3369 3517 44 48 5453 5562 5452 72
Milliamps # of LEDs
Shown with optional decal striping
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant
IP67
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
111
WA
LL
MO
UN
TLED GREENBRIAR® WALL SCONCE (XGBWM3)
Prefix FinishColor Temperature
XGBWM3 - LED Greenbriar Wall
Sconce
LED 2848
CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
OptionsLight SourceDistribution # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XGBWM3 FT LED 48 450 CW UE WHT BB
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
XGBWM3 PLS - Polycarbonate Shield 172787XGBWM3 SW BLK - Surface Wiring Box 173156BLK+SCD - Tamper-proof Screwdriver 477974FK120 - Single Fusing FK120++FK277 - Single Fusing FK277++DFK208, 240 - Double Fusing DFK208,240++DFK480 - Double Fusing DFK480++FK347 - Single Fusing FK347++
Description Order Number
NOTES:1 - Available with UE voltage only 2- Designed with 3" reduced drilling pattern. For S or D180 mounting configuration only. 3- Tamper-proof Screwdriver must be ordered separately. (See Accessory Ordering Information.)
350 - 350mA450 - 450mA
Drive Current
BB - Battery Back-up1
CWBB - Cold Weather Battery Back-up1
IMS - Integral Motion SensorPCI120 - 120V Button Type PhotocellPCI208 - 208V Button Type PhotocellPCI240 - 240V Button Type PhotocellPCI277 - 277V Button Type PhotocellPCI347 - 347V Button Type PhotocellXPMA - Pole Mount Adaptor for use with Square Pole (for single or D180 mounting configuration only)2
XPMAR - Pole Mount Adaptor for use with Round Pole (for single or D180 mounting configuration only)2
TP - Tamper Proof3
WT - Wide Throw
FT- Forward Throw
WW - Wall Wash
NOTES:+SW BLK not compatible with XPMA or XPMAR option. Available in black only.++Fusing to be installed in a compatible junction box supplied by contractor.
Color Decals 45 - Light Gold Metallic 55 - Black20 - Charcoal Metallic 50 - White94 - Blue Metallic 51 - Dark Red21 - Tomato Red 59 - Dark Green700 - Aztec Silver Metallic
DIMENSIONS
Universal Mounting Plate
7 3/4"(197 mm)
5 11/16"(145 mm)
13-1/2"(343 MM)
11-3/8"(289 mm)
8-5/8"(219 mm)
30°
J-BOX CENTERLINE
3-7/8"(98 mm)
20-1/8"(511 MM)
Shown with IMS option
13-1/2"(343 MM)
11-3/8"(289 mm)
15-3/8"(390 mm)
8-5/8"(219 mm)
30°
J-BOX CENTERLINE
3-7/8"(98 mm)
20-1/8"(511 MM)
3"(76 mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
112
WA
LL
MO
UN
T
(downlight only)
LED PATRIOT® WALL SCONCE (XPWS3)
LIGHT OUTPUT - XPWS3Distribution/Lumens (Nominal)
Type FT Type WT Type WW Watts
Cool
Whi
te
450 m
A 3
50 m
ANe
utra
l Whi
te
450 m
A 3
50 m
A
28 3100 3000 3200 34 48 5100 5100 5200 55 28 3700 3600 3800 44 48 6200 6100 6300 72
28 2900 2900 3100 34 48 4900 4800 4900 55 28 3500 3500 3700 44 48 5800 5700 5800 72
Milliamps # of LEDs
SMARTTEC™ ENERGY SAVING FEATURES:
THERMAL CONTROL - Sensors in both optical and driver enclosure reduce driver current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
OPTIONAL INTEGRAL MOTION SENSOR - Passive infrared motion sensor activates switching of luminaire light levels . High level light is activated when passersby enter target zone and increased to full bright in 1-2 seconds . Low light level (30% of maximum drive current) is activated when target zone is absent of motion activity for 5 minutes and is gradually ramped down (10 seconds) to low level . Sensor detection range 110° horizontal x 93° vertical x 10 meters maximum distance .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Available with 28 or 48 select high-brightness LEDs in Cool White (5300°K nominal) or Neutral White (4200°K nominal) color temperature, 70 CRI (nominal) .
OPTICS/DISTRIBUTIONS - Ultra-high efficiency reflectors provide three distributions . Choose from Wide Throw (WT), Forward Throw (FT) or Wall Wash (WW) .
HOUSING - One-piece die-cast aluminum housing is smoothly contoured rectangular shape . Mounting hardware is stainless steel or electro-zinc plated steel . Housing and optical unit are sealed with extruded silicone gasket; supply conductors with molded EPDM bushing .
OPTICAL UNIT - Clear tempered optical-grade flat glass lens sealed to the aluminum optic housing creates an IP65 rated unit . Pressure stabilizing breather allows super-tight protection while preventing cycling from building up internal pressures and vacuums that can stress optical unit seals .
WALL MOUNTING - Galvanized-steel universal wall mounting plate easily mounts directly to 4” octagonal or square junction box . EPDM gasket is supplied to be installed between mounting plate and junction box, sealing junction box from entrance of water . Universal plate permits fixture to be mounted in uplighting (indoor only) or downlighting position .
POLE MOUNTING - XPMA (for square) or XPMAR (for round) allows mounting to poles in single and D180 configurations . Use with 3” reduced drilling pattern .
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input) or 347-480VAC .
DRIVER - Available in 350mA and 450mA drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards . Driver can be easily accessed and removed .
EMERGENCY OPTIONS - Integral emergency battery-back-up options are available . BB option operates in 0°C to 60°C ambient temperature and CWBB operates in -20°C to 60°C ambient temperature . When primary AC power failure occurs, both options operate 10 LEDs for minimum of 90 minutes .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
FINISH - LSI's DuraGrip® polyester powder coat finishing process withstands extreme weather changes without cracking or peeling . Guaranteed for five full years .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 30 lbs ./13 .6Kg
LISTING - ETL listed to ANSI/UL1598, UL8750 and other U .S . and international safety standards . Suitable for wet locations in downlight position . Optional Class 1 Division 2 (groups A, B, C &D) hazardous location rating is available . (Select HL option)
US patent 7828456, 8002428 and CAN 2736757 & 2736757 and MX patent 29631 and ISRL 49679 and AUS 2008312668 and US & Int’l. patents pending
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
ARRAFunding Compliant
IP65
wet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
113
WA
LL
MO
UN
TLED PATRIOT® WALL SCONCE (XPWS3)
Prefix FinishColor Temperature
XPWS3 - LED
Patriot Wall Sconce
WT - Wide ThrowFT - Forward ThrowWW - Wall Wash
LED 2848
CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480
BLK - Black BRZ - BronzeGPT - GraphiteMSV - Metalic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Options
BB - Battery Back-up1
CWBB - Cold Weather Battery Back-up1
IMS - Integral Motion SensorEMR2 - Two Emergency 12V Circuit Provisions with (2) 35 Watt Halogen Lamps2
PCI 120 - Button Type PhotocellPCI 208 - Button Type PhotocellPCI 240 - Button Type PhotocellPCI 277 - Button Type PhotocellPCI 347 - Button Type PhotocellHL - Class1, Division2, Hazardous Location Rating. ETL listed to UL8443
XPMA - Pole Mounting Adaptor w/fixture backplate for use with square poles4
XPMAR4 - Pole Mounting Adaptor w/fixture backplate for use with 4” O.D. round poles4
XPMAR5 - Pole Mounting Adaptor w/fixture backplate for use with 5” O.D. round poles4
Light SourceDistribution # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XPWS3 FT LED 48 450 CW UE WHT BB
350 - 350mA450 - 450mA
Drive Current
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
XPWS3 Polycarbonate Shield XPWS3 SW BLK - Surface Wiring Box (Available in black only)
Description Order Number244657
356915BLK
FOOTNOTES:1- Available with UE voltage only.2 - Utilizes GZ4 sockets. 12 volt separate circuits required. Not available with battery back-up, photocell option, HL, XPMA or XPMAR options. 3 - Not available with battery backup, photocell or EMR2 option.4 - Not available with EMR2 option. Designed with 3” reduced drilling pattern. For S or D180 mounting configuration only.
DIMENSIONS
19-1/4”(489mm)
11”(279mm)
8”(203mm)
5-11/16”(145mm)
7-3/4”(197mm)
Universal Mounting Plate
4-5/8”(117mm)
19-1/4”(489mm)
Shown with IMS Option
8”(203mm)
4-5/8”(117mm)
12-13/16”(325mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
114
WA
LL
MO
UN
T
SMARTTEC™ THERMAL CONTROL - Sensors in both optical unit and driver enclosure reduce drive current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until safe operating temperature is reached .
ENERGY SAVING CONTROL OPTIONS – DIM – 0-10 volt dimming enabled with controls by others . BLS – Bi-level switching responds to a 120-277V signal from separate controller or sensor (by others), with low light level decreased to 30% maximum drive current .
OCCUPANCY SENSOR (IMS) - Optional internal passive infrared motion sensor activates switching of luminaire light levels . High level light is activated and increased to full bright in 1-2 seconds upon detection of motion . Low light level (30% maximum drive current) is activated when target zone is absent of motion activity for ~ 2 minutes and ramps down (10-15 sec .) to low level to allow eyes time to adjust . Sensor is located on the front of optical assembly . Sensor optic has a detection cone of approximately 45o .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5000°K nominal) or Neutral White (4000°K nominal) color temperature . 70 CRI (nominal) .
DISTRIBUTION/PERFORMANCE - Medium: Types 3 and FT; Small: Type FT . Exceptional uniformity creates bright environment at lower light levels .
HOUSING - One-piece, die-formed aluminum . Weather-tight housing contains factory prewired driver and field connections . Extruded one-piece EPDM gasketed wiring access door (with safety lanyard) is located underneath and utilizes tool-less thumbscrew fastener .
OPTICAL UNIT - Clear tempered optical grade flat glass lens sealed to aluminum optics housing creates an IP67 rated, sealed optical unit (includes pressure-stabilizing breather) . Optical unit is recessed into housing cavity and sealed to the housing with extruded one-piece EPDM gasket . Optical unit lanyard serves dual purposes of safety and provides positive ground between unit and housing .
MOUNTING - Tapered rear design allows fixtures to be easily mounted over a recessed junction box using a wall plate (supplied) .
ELECTRICAL - A terminal block for attachment of incoming primary wiring is supplied . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Location Category C . Available with universal voltage power supply 120-277VAC (50/60Hz input), and 347-480 VAC . Optional twistlock photocell receptacle is available . Photocell must be ordered separately . Fixture Watts: Small SS - 69, HO - 89 nominal; Medium SS - 139, HO - 176 nominal .
DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents (Drive currents are factory programmed) . Components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards . Driver and key electronic components can easily be accessed .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
FINISH - Fixtures are finished with LSI's DuraGrip ® polyester powder coat finishing process . The DuraGrip finish withstands extreme weather changes without cracking or peeling .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT (in carton) - 31 lbs . / 14 .1 Kg (small, fixture only) . 39 lbs . / 17 .7 Kg (medium, fixture only) . Add 5 lbs . / 12 Kg for wall plate for total shipment weight .
LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED WALL LIGHTS - AEROMAXTM (XAWSU/XAWMU)US patent 7828456, 7952293, 8002428 and CAN 2693131 & 2701653 and US & Int'l. patents pending
Type FT SS
HOSSHO
LIGHT OUTPUT - XAWSULumens (Nominal)# of LEDS
Cool
Whi
te 6200765057006700
64646464Ne
utra
lW
hite
Type 3 Type FT SS
HOSSHO
LIGHT OUTPUT - XAWMULumens (Nominal)# of LEDS
Cool
Whi
te 13500165001240015000
14100173001320015800
128128128128Ne
utra
lW
hite
Fixtures comply with ANSI C136 .31-2010 American National Standard for Roadway Lighting Equipment - Luminaire Vibration 3G requirements .
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant enabled
enabled
IP65IP67
DARK-SKY FRIENDLY
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
115
WA
LL
MO
UN
T
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XAWSU FT LED 64 HO CW UE WHT PCR
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
FOOTNOTES:1- IMS, DIM and BLS cannot be ordered together.2 - Do not specify for satellite units.3- Not compatible with Virtinet wireless systems, DIM or BLS.
4- Photocell must be ordered separately. See Accessories.5 - Factory installed PCR option required.6 - Includes VCM. To be used in conjunction with VCM option in fixture. Consult factory.
PC120 Photocell for use with PCR option (120V) 1225145
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 1225155
PC347 Photocell for use with PCR option (347V) 1595165
PC480 Photocell for use with PCR option (480V) 12251805
ROSB120 - WL Remote Box with 120V Occupancy Sensor C/F6
ROSB277 - WL Remote Box with 277V Occupancy Sensor C/F6
RPSB120 - Wet Location Remote Box with 120V External Photocell C/F6
RPSB208-277 - Wet Location Remote Box with 208-277V External Photocell C/F6
Prefix FinishColorTemperature
XAWSU
XAWMU
LED 64
128
CW - Cool WhiteNW - Neutral White
Input Voltage
UE - UniversalVoltage
(120-277)
347-480 - UniversalVoltage
(347-480V)
BLK - BlackBRZ - BronzeGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White
Optional Sensor/Options
Optional ControlsLightSource
Distribution # ofLEDs
SS - Super SaverHO -High Ouput
DriveCurrent
SensorES - External Sensor2
IMS - Integral Motion Sensor3
OptionsPCR - Photoelectric C ontrol Receptacle4
FT - Forward Throw
3 - Type IIIFT - Forward Throw
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM - 0-10V Dimming (from external signal)1
BLS Bi-level Switching (from external 120-277V signal)1
LED WALL LIGHTS - AEROMAXTM (XAWSU/XAWMU)
DIMENSIONS (shown with VCM/VCMES option)
Front View
Side View Bottom View
6-3/8"(161 mm)
6-3/8"(161 mm)
18-3/8"(466 mm)
26-1/2"(674 mm)
Medium
Small
Side View Bottom View
6-3/8"(161 mm)
35-7/16"(900 mm)
18-3/8"(465 mm)
18-3/8"(465 mm)
Front ViewTop View
Wall Bracket
11/16”(18mm)
8”(203mm)
8” (203mm)
6”(152mm)
6-1/2”(165mm)
4-3/4”(121mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
116
WA
LL
MO
UN
T
APPLICATIONS - This luminaire is designed for low level lighting of walkways, entryways, stairways, columns and the enhancement of other architectural features . Suitable for wet or dry, hot or cold conditions .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Select high-brightness LEDs in Cool White (5400°K nominal) .
DISTRIBUTION/PERFORMANCE - Type 2 IES classification with full cut-off for maximum light control .
HOUSING - Composite rough-in housing never corrodes; field-proven to last for more than 20 years without maintenance . Housing is sealed to round or square die cast faceplate via silicone gasketing .
OPTICAL UNIT - Clear, linear or frosted tempered glass lens is sealed to the faceplate with silicone elastomer gasketing .
INSTALLATION - Designed for recessed applications in concrete and Non-IC walls . Rough-in housings can be shipped ahead for pre-casting . Includes 2 Non-IC wall brackets . Waterproof wire connectors are included to provide for a high quality installation .
FACEPLATE - One piece, die-cast aluminum faceplate is secured to housing by 4 captive black oxide coated, stainless steel fasteners . Faceplates measure 11” diameter for Round or 9” Square and are ADA Compliant .
ELECTRICAL - Universal voltage power supply (120-277VAC, 50/60 Hz) . Dissimilar quick connectors ensure error free assembly .
DRIVER - State-of-the-art driver technology specifically designed for LSI LED fixtures provides superior system efficiency .
OPERATING TEMPERATURE - -40°C to +50°C ( -40°F to +122°F)
FINISH - Fixtures are finished with LSI's DuraGrip® polyester powder coat finish process . The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for a full five years . Standard colors include black, buff, bronze, graphite, metallic silver, satin verde green and white .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
SHIPPING WEIGHT - 9 lbs . (4 .1kg)
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations
LED ESCALANTE RECESSED WALL/STEP LIGHTS (XESS/XESR)
0
1MH
1MH 2MH
2MH
1MH
2MH
3MH
3MH
XESS/R-LED-5-CW-CL
A
BC D
0
1MH
1MH 2MH
2MH
1MH
2MH
3MH
3MH
XESS/R-LED-5-CW-FL
ABC
DInitial FootcandlesMounting
Height A B C D E
1.5 3.56 1.78 0.89 0.36 0.18
2.0 2.00 1.00 0.50 0.20 0.102.5 1.28 0.64 0.32 0.13 0.06
3.0 0.89 0.44 0.22 0.09 0.043.5 0.65 0.33 0.16 0.07 0.03
4.0 0.50 0.25 0.13 0.05 0.03Distances on charts are expressed in units of mounting height.
Also available in traditional light sources
PERFORMANCE CURVES
LIGHT OUTPUT XESS/XESRFixture Lumens (Nominal)
CL LS FL310 260 257XESS/XESR
Input Power of 7 watts
7 7/8”(200 mm)
XESR
XESS 7 7/8”
(200 mm)
11”(279 mm)
9”(229 mm)
8 7/8”(225 mm)
2 3/16”(56 mm)
2 3/16”(55 mm)
5 7/8”(150 mm)
5 7/8”(150 mm)
8 11/16”(221 mm)
8 11/16”(221 mm)
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
wet location
ARRAFunding Compliant
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
117
WA
LL
MO
UN
T
INSTALLATION
LED ESCALANTE RECESSED WALL/STEP LIGHTS (XESS/XESR)
Prefix
XESR (Round)
XESS (Square)
5 CW - Cool White(5400° K nom.)
UE - UniversalElectronic
(120-277V 50/60Hz)
BRZ - BronzeBLK - BlackWHT - WhiteBUF - BuffMSV - Metallic SilverGPT - GraphiteSVG - Satin Verde Green
CL - Clear Lens FL - Frosted Lens LS - Linear Spread
LED
LensColor TemperatureLight Source # LEDs Input Voltage Finish
SCE - Side Conduit Entry
Options
TYPICAL ORDER EXAMPLE:
PRODUCT ORDERING INFORMATION
XESS LED 5 CW LS UE BRZ SCE
5-7/8”
(7-1/2”)
WALL
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
118
WA
LL
MO
UN
T
IP67
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
HOUSING – Architecturally styled, one-piece, die-cast aluminum, 360 alloy, low copper housing features a multi-radius rectangular shape with integral cooling ribs over the back, and .156” nominal wall thickness . One-piece vulcanized silicone gasket seals the door frame to the housing and is concealed when fixture is closed . IP67 rated .
DOOR FRAME – One-piece, die-cast aluminum, 360 alloy, low copper, .156” nominal wall thickness door frame secures to housing via four, stainless steel recessed captive torx T-30 screws . Door frame hinges with two (concealed) stainless steel hinge brackets . 3/16” thick clear tempered glass lens is sealed to door frame by a one-piece silicone gasket and ten black zinc plated clips . Eight drill points provided for attachment of Barn Door, Glare Shield, and Polycarbonate Shield accessories .
LEDS – Features an array of select, high brightness, high efficiency LED chips; CW - 5100oK color temperature, 70 CRI (nominal) or NW - 4100oK color temperature, 80 CRI (nominal) or WW - 3500oK color temperature, 80 CRI (nominal) .
DRIVE CURRENT – Choice of Low Wattage (LW), Super Saver (SS) or High Output (HO) .
OPTICS / DISTRIBUTION – Multiple LED modules are strategically mounted to interchangeable optical panels, to deliver a choice of 6 high performance distributions; HF, VF, MF, NF, WF, or SP .
PRESSURE STABILIZING VENT – Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
DRIVER– State-of-the-art driver technology delivers superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards . Optional 0-10V dimming driver available, with controls by others .
OPERATING TEMPERATURE - -40oC to 50oC (-40oF to +122oF)
ELECTRICAL – Universal voltage power supply, 120-277 VAC (50/60 HZ input) and 347-480 VAC . LSI drivers feature two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C, 10KV
FINISH – Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
MOUNTING – Standard mounting is a heavy duty, die-cast knuckle assembly with ¾” NPSM male thread mount that allows up to 185o range of motion . Locking plate and swivel arm allow for tilt / aiming in 7 .5o increments . Alignment arrow and indicator lines allow positive, error-free aiming . An allen-head set screw locks fixture orientation on the mounting device . Optional Yoke mount is also available . Mounting accessories include Stanchion, Wall Plate or Post-Top Adaptor, which must be ordered separately.
SHIPPING WEIGHT – 18 pounds .
EXPECTED LIFE – Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
LISTING - UL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for wet locations .
EPA 1.1
LED FLOOD LIGHT - MEDIUM (XFLM)US & Int'l. patents pending
14”
4”
4-5/16”
8-7/8”
1-1/2”
9-1/4”
14”
4-3/8”
4-5/16”
9-9/16”
2-1/4”
9-1/4”
DIMENSIONS
YOKE MOUNT
Type Lumens Watts LPW NEMA
LWSSHO
LWSSHO
LIGHT OUTPUT - XFLMHorizontal Distr. (HF)
Cool
Whi
te
LWSSHOW
arm
Whi
teNe
utra
l Whi
te
wet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
119
WA
LL
MO
UN
TLED FLOOD LIGHT - MEDIUM (XFLM)
TYPICAL ORDER EXAMPLE:
LuminairePrefix Distribution
LightSource
LUMINAIRE ORDERING INFORMATION
# ofLEDs
DriveCurrent
ACCESSORY ORDERING INFORMATIONDescription Order Number Description Order Number
(Accessories are field installed)
LineVoltage
LuminaireFinish Options
BRZ - BronzeBLK - BlackPLP – Platinum
PlusWHT - WhiteSVG - Satin Verde GreenGPT - GraphiteMSV - Metallic
Silver
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
LW - Low WattageSS - Super SaverHO - High Output
LED 284249
UE - Universal Voltage
(120-277v)
347-480Univ Voltage(347-480v)
HF - Horizontal FloodMF - Medium Horizontal FloodVF - Vertical Flood SP -SpotNF - Narrow FloodWF - Wide Flood
XFLM - Medium LED Flood
PC120 - Photocell 120vPCHV - Photocell 208-277vPC347 - Photocell 347v2
YM - Yoke MountDIM - 0-10v Dimming1
XFLM SP LED 28 SS CW UE BRZ
TYPICAL ORDER EXAMPLE: BKA XFLM SMC 23 BLK
Color Temp.
BRZ – BronzeBLK – BlackPLP – Platinum PlusBUF – BuffWHT – WhiteGPT - GraphiteSVG - Satin Verde GreenMSV - Metallic Silver
None23"
4"
SMC – Stanchion Mount
J4R WM – Wall Mount
J4R WM SCE – Wall Mount Side Conduit Entry
XFLMBKA – Bracket Aluminum
7
2
FOOTNOTES:1- DIM option is not available in 347-480V.2- PCI option is not available in 480V.
JB – Junction BoxBD – Barn Doors GS – Glare Shield
122534CLR122539CLR122540CLR
122541122542CLR
122543
PS – Polycarbonate ShieldPT – Post Top Adaptor TA – Thread Adaptor 1/2" (No Finish)
BRACKET ORDERING INFORMATIONBracket
DesignationBracket
TypeBracket
ConfigurationLength OptionsBracket Finish Est. Weight (lbs.)
ARCHITECTURAL JUNCTION BOX (JB) - Cast aluminum body and extruded matching cover. One-piece EPDM cover gasket. Internal ground screw provided. 3/4" NPSM fixture mount with sealing locknut. Two 1/2" NPSM for conduit entry. For above grade installation only. Available in standard finishes.
POST TOP ADAPTOR (PT) - One-piece cast aluminum – mounts on pole with 2" pipe tenon (2-3/8" OD x 3-1/2" minimum length) or 2-1/2" pipe tenon (2-7/8" OD x 3-1/2" minimum length). Fixture threads into adaptor and attaches to pole with allen set screws. Post Top Adaptor allows mounting of one or two fixtures and 360° horizontal adjustment. Available in standard finishes.
1/2" THREADED ADAPTOR (TA )- Machined aluminum pipe reducer adapts 3/4" pipe thread (T-stem) to 1/2" pipe thread provided by others.
BARN DOORS (BD) - Extruded aluminum doors with anti-reflection baffles. Each door is attached with two aluminum clamps with set screws to maintain position. Doors are individually removable. Assembly mounts to die-cast door frame holes. Caution: Not recommended for ground-mounted fixtures in vandal-prone areas. Available in standard finishes.
GLARE SHIELD (GS) - Formed 16 ga. steel. Mounts to die-cast door frame holes and may be used withpolycarbonate shield accessory. Available in standard finishes.
POLYCARBONATE SHIELD (PS)1/8" clear convex, UV stabilized, thermoformed polycarbonate. Mounts to die-cast door frame holes. May be used with glare shield accessory. Caution: Use only when vandalism is anticipated. Useful life is limited by UV discoloration from sunlight, HPS, or MH lamps.
MOUNTING BRACKETSSTANCHION MOUNT (SMC) - 3" OD x .250" x 22.65" cast aluminum with 3/4" NPSM fixture mount, and a standard 2 3/8" tenon. Wiring and internal ground lug accessible through hand hole. Available in standard finishes.
WALL MOUNT J-BOX (J4 WM / J4R WM SCE) - J4R WM or J4R WM SCE includes J4R junction box & 507504 SC canopy with 4 screws & canopy cover gasket. SCE version is machined with 2ea 1/2" conduit entries and includes plugs for unused conduit entries.
3/4” Conduit(by others)
3/4-14 NPS HUB
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
120
LIN
EA
R E
XT
ER
IOR
APPLICATION - An efficient and easy to install system for constructing continuous row building face lighting from above the top of a fascia . Brilliant High Lux LEDs are designed to provide dramatic and even illumination, for either new or retrofit applications .
LEDS - High Lux LEDs that produce approximately 260 lumens at 3 .5 watts per foot in Cool White (5100°K nominal), Neutral White (4100°K nominal) and Bright White (6500° K nominal) color temperature . Lumen output and wattage may vary depending upon run length, power supply and LED Kelvin temperature . 70 CRI (nominal) .
OPTICS - High efficiency, die formed, one piece reflectors provide a smooth and brilliant Asymmetrical distribution along with even vertical illumination to enhance the structure face and create brilliant depth from the road . Incremental optional lengths are designed to seamlessly cover the facade in a continuous row application . Luminaire is rated full cutoff .
HOUSING - Die formed, non-corrosive aluminum, painted after fabrication with several powder coat finish options .
POWER SUPPLY - 75w/120v 60Hz input / 60 watt 12VDC output power supplies constant current and is potted for use in damp locations . Other input voltages and frequencies are available, please consult the factory for details .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
INSTALLATION - Installs in continuous row applications designed to span entire fasciaand soffit lengths
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL Listed Wet location
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
LINEAR LED WIDE FASCIA - LWFU.S. and international patents pending
DIMENSIONS
Cross Section Fixture End Cover Plate
Dimensions above are for determining overall length of individual sections. Specify total linear run length per individual straight run to insure proper power supply requirements. Standard maximum length of a single unit is 8 feet. All other specified lengths are combinations of 8 feet and below.
4-11/16"
6-3/8"
8-3/8"
4-3/4"6-1/2"
8-1/2"(A)
PERMLIGHTEL PLATO REV B
+
-PERMLIGHTEL PLATO REV B
+
-PERMLIGHTEL PLATO REV B
+
-PERMLIGHTEL PLATO REV B
+
-
8-1/2"(216mm) (165mm) (121mm)
(163mm)
(119mm)
(216mm) (212mm)
Description Dim "A" 2' housing 24" / 610mm4'housing 48" / 1220mm 5'housing 60" / 1524mm6' housing 72" / 1829mm8' housing 96" / 2439mm
TYPICAL APPLICATION
wet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
121
LIN
EA
R E
XT
ER
IOR
LINEAR LED WIDE FASCIA - LWF
LWF BRZ - Bronze BLK - Black PLP - Platinum PlusWHT - White GPT - Graphite MSV - Metallic Silver SVG - Satin Verde Green
Finish1
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
LWF 4 LED CW BLK UE
NOTE:1- Special RAL colors are available, consult factory for details2- Consult factory for other input voltage options3- Mounting bracket only available in 8 ft. sections - field cut for shorter lengths
ACCESSORY ORDERING INFORMATIONDescription Order Number
(Accessories are field installed)
A. Fixture Mounting Bracket3
B. Bracket End CapC. Fixture End CapD. Left Straight Extension Right Straight ExtensionE. Adjustable Outside Corner Adjustable Inside Corner
BKS-WFBO-WM-96-CLR – 107117CLR00069CLR
43148CLR43319CLR43320CLR43366CLR43367CLR
Description Order NumberF. Upright SupportG. Hat BracketH. L-BracketJ. Fascia Extension BracketK. Right Hand 2' MiterL. Left Hand 2' MiterNOTE: CLR- Specify finish. Must be same as luminaire.
43287 52787 52993
5200159 5200251CLR5200252CLR
Mounting brackets must be ordered separately.
C
DB
H
G
F
E
A
J
KL
3-5/16"
44"(1118mm)
19"4-1/2"
Prefix
2 - 2ft4 - 4ft5 - 5ft6 - 6ft8- 8ft
10- 10ft
12- 12ft14 - 14ft16- 16ft
LED - Light Emitting Diode CW – Cool WhiteNW – Neutral WhiteBW – Bright White
Input Voltage
1202
Light Source LED ColorTotal Linear Length Required (ft.)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
122
LIN
EA
R E
XT
ER
IOR
APPLICATION - A highly efficient and dramatic means of wall illumination, designed for seamless continuous row mounting on an exterior wall . This wall wash system adds brilliant LED performance to new installations or can drastically enhance an existing structure as a fluorescent replacement wall wash retrofit system . Optimal performance can be achieved at mounting heights of 10 to 12 ft . above finished floor .
LEDS - High Lux LEDs that produce approximately 260 lumens at 3 .5 watts per foot in Cool White (5100°K nominal), Neutral White (4100°K nominal) and Bright White (6500° K nominal) color temperature . Lumen output and wattage may vary depending upon run length, power supply and LED Kelvin temperature . 70 CRI (nominal) .
OPTICS - High efficiency, die formed, one piece reflectors provide a smooth and brilliant Asymmetrical distribution along with even vertical illumination to enhance the structure face and create brilliant depth from the road . Incremental optional lengths are designed to seamlessly cover the facade in a continuous row application . Luminaire is rated full cutoff .
HOUSING - Die formed, non-corrosive aluminum, painted after fabrication with several powder coat finish options .
POWER SUPPLY - 75w/120v 60Hz input / 60 watt 12VDC output power supplies constant current and is potted for use in damp locations . Other input voltages and frequencies are available, please consult the factory for details .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
INSTALLATION - Installs in continuous row applications designed to wash light downbuilding walls .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL Listed Wet location
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
LINEAR LED WALL WASH - LWWU.S. and international patents pending
10'(3.0m)
TYPICAL APPLICATION
DIMENSIONS
Cross Section Fixture End Cover Plate
(A)
PERMLIGHTEL PLATO REV B
+
-PERMLIGHTEL PLATO REV B
+
-PERMLIGHTEL PLATO REV B
+
-PERMLIGHTEL PLATO REV B
+
-
Dimensions above are for determining overall length of individual sections. Specify total linear run length per individual straight run to insure proper power supply requirements. Standard maximum length of a single unit is 8 feet. All other specified lengths are combinations of 8 feet and below.
4-11/16"6-3/8"6-1/2"
(165mm)
6-1/2"(165mm)
4-3/4"(121mm)
(163mm)(119mm)
8-3/8"(162mm)
Fixture End Cover Plate
Description Dim "A" 4'housing 48" / 1220mm 6' housing 72" / 1829mm8' housing 96" / 2439mm
wet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
123
LIN
EA
R E
XT
ER
IOR
LINEAR LED WALL WASH - LWW
LWW
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
LWW 8 LED CW BLK 120
BRZ - Bronze BLK - Black PLP - Platinum Plus WHT - White GPT - Graphite MSV - Metallic Silver SVG - Satin Verde Green
Finish1Prefix
LED - Light Emitting Diode CW – Cool WhiteNW – Neutral WhiteBW – Bright White
Input Voltage
1202
Light Source LED ColorTotal Linear Length Required (ft.)
NOTE:1- Special RAL colors are available, consult factory for details2- Consult factory for other input voltage options3- Items listed are painted white - consult factory for optional paint finishes
4 - 4ft6 - 6ft8- 8ft
10- 10ft
12- 12ft14 - 14ft16- 16ft
ACCESSORY ORDERING INFORMATIONDescription Order Number
(Accessories are field installed)
(Accessories are field installed)
Left Hand Straight Extension (4" to 12")*Right Hand Straight Extension (4" to 12")*End Cap
43296CLR43297CLR43128CLR
Order Number3
48” - 53970172” - 53970296” - 539703
*Can be field cut to allow less than 4" dimension.NOTE: CLR- Specify finish. Must be same as luminaire.
6-1/2"(165mm)
6-1/2"(165mm)
4" to 12"(102mm to 305mm)
3"(76mm)
Straight ExtensionEnd Cap
Total Component Length
Adjustable Brackets Supplied
Standard Adjustable Bracket
Comes with fixture
Optional Flush Mount Bracket
Width:4"
(102mm)
Height:4"
(102mm)
6-1/2"(165mm)
FURNISHED BRACKET INFORMATION
4'6'8'10'12'14'16'
2224444
Total Component Length Brackets RequiredOPTIONAL FLUSH MOUNT BRACKETS
4'6'8'10'12'14'16'
(1) 48"(1) 72"(1) 96"
(1) 48" and (1) 72"(1) 72" and (1) 72"(1) 96" and (1) 72"
(2) 96"
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
124
LIN
EA
R E
XT
ER
IOR
APPLICATION - A complete continuous row building series of high performance, energyefficient LED illumination in an easy to install format . Perfect for new or replacement applications . Designed for applications for storefront walkways and sidewalks .
LEDS - High Lux LEDs that produce approximately 260 lumens at 3 .5 watts per foot in Cool White (5100°K nominal), Neutral White (4100°K nominal) and Bright White (6500° K nominal) color temperature . Lumen output and wattage may vary depending upon run length, power supply and LED Kelvin temperature . 70 CRI (nominal) .
OPTICS - High efficiency, die formed, one piece reflectors provide a smooth and brilliant Symmetrical distribution .
HOUSING - Die formed, non-corrosive aluminum, painted with several powder coat finish options .
POWER SUPPLY - 60w/120v 60Hz input / 60 watt 12VDC output power supplies constant current and is potted for use in damp locations . Other input voltages and frequencies are available, please consult the factory for details .
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F)
INSTALLATION - Installs in continuous row or staggered applications designed to spanentire soffit lengths .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - ETL compliant to U .S . and Canadian safety standards . Suitable for wet locations .
PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications Group at lighting .apps@lsi-industries .com
LED SOFFIT STRIP - LSSU.S. and international patents pending
Prefix
LSS 4 - 4ft6 - 6ft8 - 8ft
LED - Light Emitting Diode CW – Cool WhiteNW – Neutral WhiteBW – Bright White
Input Voltage
1202
Light Source LED Color2Total Linear Length Required (ft.)1
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
LSS 4 LED CW 120
NOTE:1- Standard maximum length of a single unit is 8 feet. All other specified lengths are combinations of 8 feet and below.2- Consult factory for other input voltages.
DIMENSIONS
Description Dim "A" 4 ft. Soffit Housing 48" / 1220 mm 6 ft. Soffit Housing 72" / 1829 mm 8 Ft. Soffit Housing 96" / 2439 mm
Dimensions above are for determining overall length of individual sections. Specify total linear run length per individual straight run to insure proper power supply requirements. Standard maximum length of a single unit is 8 feet. All other specified lengths are combinations of 8 feet and below.
3 7/8"(98mm)
END VIEWCROSS SECTION
3 3/4"(95mm)
3 3/4"(95mm)
2 7/8"(73mm)
2 7/8"(73mm)
LED POWER
SUPPLYRED(+)
BLUE(-)
BLACK
WHITE
(A)
TYPICAL APPLICATION
wet location
Project Name
Catalog #125
THIS PAGE LEFT INTENTIONALLY BLANK
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
126
IND
OO
R/O
UT
DO
OR
DE
SIG
NE
R
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
ARRAFunding Compliant
Suitable for wet locations
LSI ABOLITE® LED ANGLED REFLECTOR (AD)
APPLICATIONS - Signage Lighting and Accent Lighting . Interior or Exterior .
PRODUCT HIGHLIGHTS
• “Green” Energy-Saving - Reduces greenhouse gas emissions, slashes operating costs,extends life and eliminates costly lamp disposal involving mercury waste .
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means degradation in color or quality of the product under display is minimized .
• Dramatically Lower Maintenance Costs - 60,000-hour LED source extends life 3 to 5times as compared to conventional HID sources, 30 times incandescent .
• Integrated Power Supply - Built into fixture allowing RLM to be connected directly toline voltage .
FINISH - Available in either architectural textured, high gloss or satin finish .
LEDS - Select high-brightness LEDs in Cool White (5300o K nominal), Neutral White (4100o K nominal), and Warm White (3500o K nominal) color temperature . 70 CRI (nominal) .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
MOUNTING - Fixed hub tapped for 3/4” NPT conduit . Pre-wired with 96” leads . Not designed for uplight applications .
REFLECTOR - Heavy duty spun galvanized steel construction with polyester powder coat finish .
ELECTRICAL - Integral power supply operates on 120-240 VAC (50/60Hz) input; no external power supplies required .
LIGHT OUTPUT - With an input power of 11 watts: Cool White - 1000 lumens (nominal), Neutral White - 750 lumens (nominal), and Warm White - 700 lumens (nominal) .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
DRIVER - State-of-the-art driver designed specifically for RLM fixtures provides unsurpassed system efficiency . Components are fully encased in potting material for moisture resistance . Driver complies with IEC and FCC standards .
OPTIONAL DIRECTIONAL OPTICS - Allows field adjustment of the light beam for directional illumination of signage .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations .
US patents D598162 & D581585 & D581544 & 7697766 and US & Int’l. patents pending
Also available in traditional light sources
DIMENSIONS
Prefix Height (A) Diameter (B) Neck ( C )Weight
(lbs./kg)
AD 100 10" (254mm) 7" (178mm) 5" (127mm) 2.0 (.9kg)AD 150 11-1/2" (292mm) 9" (229mm) 5-1/4" (133mm) 2.0 (.9kg)AD 200 13-1/2" (343mm) 11" (279mm) 5-1/2" (140mm) 2.5 (1.1kg)
CA
B
Directional Optics Symmetrical Optics
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
127
IND
OO
R/O
UT
DO
OR
DE
SIG
NE
RLSI ABOLITE® LED ANGLED REFLECTOR (AD)
Prefix Options
AD 1001
AD 1501
AD 2001
LED 120-2401CW - Cool WhiteNW - Neutral WhiteWW - Warm White
# ofLED’s
10 DO - Directional OpticsLDS96 WL - Factory prewired leads for use with stem or bracket mounting
Color Temperature Light Source Input Voltage
MSV-Metallic Silver GWT-Gloss White GBK-Gloss Black GRD-Gloss Red GPT-Textured Graphite RUS-Textured Rust SCP-Satin Copper STQ-Satin Turquoise SVG-Satin Verde Green
Reflector Color Mounting
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
AD 200 10 CW LED UE MSV LDS96 WL DO
1- Cordsets not available for AD Series.2- Fixture will not operate on 277VAC (120-240 only).
BC600 3 GWT BC585 ZINC BC585SQ ZINC
CANOPY ORDERING INFORMATION (Accessories are field installed)
3/4" (19mm) Tap Decorative Box Cover Aligner - Gloss White3/4" (19mm) Tap Round Box Cover Aligner - Zinc3/4" (19mm) Tap Square Box Cover Aligner - Zinc
Description Order Number
CWBM 1 GWT CWBL 1 GWT DWB 1 GWT
WALL BRACKETS ORDERING INFORMATION (Accessories are field installed)
Contemporary Wall Bracket - Medium - Gloss White Contemporary Wall Bracket - Long - Gloss White Nostalgic Aluminum Wall Scroll Bracket - Gloss White
Description Order Number
ST 3 3 GWTST 6 3 GWTST 12 3 GWTST 18 3 GWTST 24 3 GWTST 36 3 GWTST 48 3 GWTST 60 3 GWTST 72 3 GWTCOP 3 GWT
CONDUIT SYSTEM ORDERING INFORMATION (Accessories are field installed)
3/4" x 3" (19mm x76mm) Aluminum Stem - Gloss White 3/4" x 6" (19mm x152mm) Aluminum Stem - Gloss White 3/4" x 12" (19mm x .4m) Aluminum Stem - Gloss White 3/4" x 18" (19mm x .5m) Aluminum Stem - Gloss White 3/4" x 24" (19mm x .6m) Aluminum Stem - Gloss White 3/4" x 36" (19mm x .9m) Aluminum Stem - Gloss White 3/4" x 48" (19mm x 1.2m) Aluminum Stem - Gloss White 3/4" x 60" (19mm x 1.5m) Aluminum Stem - Gloss White 3/4" x 72" (19mm x 1.8m) Aluminum Stem - Gloss White 3/4" (19mm) Alum. Stem Coupler - Gloss White
Description Order Number
- Standard BC600 finish is Gloss White Powder; other RLM colors available.
COG 7 MSV COG 9 MSV COG 11 MSV
WIRE GUARD ORDERING INFORMATION (Accessories are field installed)
7" (178mm) Convex Wire Guard - Metallic Silver 9" (229mm) Convex Wire Guard - Metallic Silver 11" (279mm) Convex Wire Guard - Metallic Silver
Description Order Number
- Standard finish is Metallic Silver Powder; other RLM colors available.
GB A 3 GWT GB B 3 GWT GB C 3 GWT GB D 3 GWT GB E 3 GWT GB F 3 GWT GB G 3 GWT GB H 3 GWT GB J 3 GWT GB K 3 GWT GB P 3 GWT GB U 3 GWT
3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White
BRACKETS - See Indoor section for detail on bracket sizes and shapes. - Standard finish is Gloss White Powder; colors available. - Designed for mounting to recessed 4" (102mm) octagon box (by others).
- Standard finish is Gloss White Powder; other RLM colors available.
GOOSE NECK BRACKET ORDERING INFORMATION(Accessories are field installed)
Description Order Number
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
128
IND
OO
R/O
UT
DO
OR
DE
SIG
NE
R
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
ARRAFunding Compliant
Suitable for wet locations
LSI ABOLITE® LED DEEP BOWL (BD)
APPLICATIONS - Ambient Lighting and Accent Lighting . Interior or Exterior .
PRODUCT HIGHLIGHTS
• “Green” Energy-Saving - Reduces greenhouse gas emissions, slashes operating costs,extends life and eliminates costly lamp disposal involving mercury waste .
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means degradation in color or quality of the product under display is minimized .
• Dramatically Lower Maintenance Costs - 60,000-hour LED source extends life 3 to 5times as compared to conventional HID sources, 30 times incandescent .
• Integrated Power Supply - Built into fixture allowing RLM to be connected directly toline voltage .
FINISH - Available in either architectural textured, high gloss or satin finish .
LEDS - Select high-brightness LEDs in Cool White (5300o K nominal), Neutral White (4100o K nominal), and Warm White (3500o K nominal) color temperature . 70 CRI (nominal) .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
MOUNTING - Fixed hub tapped for 3/4” NPT conduit . Pre-wired with 96” leads . Not designed for uplight applications .
REFLECTOR - Heavy duty spun galvanized steel construction with polyester powder coat finish .
ELECTRICAL - Integral power supply operates on 120-240 VAC (50/60Hz) input; no external power supplies required .
LIGHT OUTPUT - With an input power of 11 watts: Cool White - 1000 lumens (nominal), Neutral White - 750 lumens (nominal), and Warm White - 700 lumens (nominal) .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
DRIVER - State-of-the-art driver designed specifically for RLM fixtures provides unsurpassed system efficiency . Components are fully encased in potting material for moisture resistance . Driver complies with IEC and FCC standards .
OPTIONAL DIRECTIONAL OPTICS - Allows field adjustment of the light beam for directional illumination of signage .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations .
US patents D581584 & D598162 & D581585 and CN patent 2630873 and US & Int’l. patents pending
Also available in traditional light sources
DIMENSIONS
Prefix Height (A) Diameter (B) Neck ( C )Weight
(lbs./kg)
BD 200 11" (279mm) 10" (254mm) 4-3/4" (121mm) 2.5 (1.1kg)BD 300 12" (305mm) 13" (330mm) 4-3/4" (121mm) 3.2 (1.45kg)
CA
B
Symmetrical Optics
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
129
IND
OO
R/O
UT
DO
OR
DE
SIG
NE
RLSI ABOLITE® LED DEEP BOWL (BD)
Prefix
BD 200BD 300
LED 120-2401CW - Cool WhiteNW - Neutral WhiteWW - Warm White
# ofLED’s
10 LDS96 WL - Factory prewired leads for use with stem or bracket mounting
CA120BLK2
CA120WHT2
CA120BLKS2
CA120WHTS2
RC72BLKS2
Color Temperature Light Source Input Voltage
MSV-Metallic Silver GWT-Gloss White GBK-Gloss Black GRD-Gloss Red GPT-Textured Graphite RUS-Textured Rust SCP-Satin Copper STQ-Satin Turquoise SVG-Satin Verde Green
Reflector Color Mounting
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
BD 200 10 CW LED UE MSV LDS96 WL
1- Fixture will not operate on 277VAC (120-240 only).2- Cordsets are damp location only.
BC600 3 GWT BC585 ZINC BC585SQ ZINC
CANOPY ORDERING INFORMATION (Accessories are field installed)
3/4" (19mm) Tap Decorative Box Cover Aligner - Gloss White3/4" (19mm) Tap Round Box Cover Aligner - Zinc3/4" (19mm) Tap Square Box Cover Aligner - Zinc
Description Order Number
CWBM 1 GWT CWBL 1 GWT DWB 1 GWT
WALL BRACKETS ORDERING INFORMATION (Accessories are field installed)
Contemporary Wall Bracket - Medium - Gloss White Contemporary Wall Bracket - Long - Gloss White Nostalgic Aluminum Wall Scroll Bracket - Gloss White
Description Order Number
ST 3 3 GWTST 6 3 GWTST 12 3 GWTST 18 3 GWTST 24 3 GWTST 36 3 GWTST 48 3 GWTST 60 3 GWTST 72 3 GWTCOP 3 GWT
CONDUIT SYSTEM ORDERING INFORMATION (Accessories are field installed)
3/4" x 3" (19mm x76mm) Aluminum Stem - Gloss White 3/4" x 6" (19mm x152mm) Aluminum Stem - Gloss White 3/4" x 12" (19mm x .4m) Aluminum Stem - Gloss White 3/4" x 18" (19mm x .5m) Aluminum Stem - Gloss White 3/4" x 24" (19mm x .6m) Aluminum Stem - Gloss White 3/4" x 36" (19mm x .9m) Aluminum Stem - Gloss White 3/4" x 48" (19mm x 1.2m) Aluminum Stem - Gloss White 3/4" x 60" (19mm x 1.5m) Aluminum Stem - Gloss White 3/4" x 72" (19mm x 1.8m) Aluminum Stem - Gloss White 3/4" (19mm) Alum. Stem Coupler - Gloss White
Description Order Number
- Standard BC600 finish is Gloss White Powder; other RLM colors available.
COG 10 MSV COG 13 MSV
WIRE GUARD ORDERING INFORMATION (Accessories are field installed)
10" (254mm) Convex Wire Guard - Metallic Silver 13" (.4m) Convex Wire Guard - Metallic Silver
Description Order Number
- Standard finish is Metallic Silver Powder; other RLM colors available.
GB A 3 GWT GB B 3 GWT GB C 3 GWT GB D 3 GWT GB E 3 GWT GB F 3 GWT GB G 3 GWT GB H 3 GWT GB J 3 GWT GB K 3 GWT GB P 3 GWT GB U 3 GWT
3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White
BRACKETS - See Indoor section for detail on bracket sizes and shapes. - Standard finish is Gloss White Powder; colors available.- Designed for mounting to recessed 4" (102mm) octagon box (by others).
- Standard finish is Gloss White Powder; other RLM colors available.
GOOSE NECK BRACKETS ORDERING INFORMATION(Accessories are field installed)
Description Order Number
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
130
IND
OO
R/O
UT
DO
OR
DE
SIG
NE
R
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
ARRAFunding Compliant
Suitable for wet locations
APPLICATIONS - Ambient Lighting, and Accent Lighting . Interior or Exterior .
PRODUCT HIGHLIGHTS
• “Green” Energy-Saving - Reduces greenhouse gas emissions, slashes operating costs,extends life and eliminates costly lamp disposal involving mercury waste .
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means degradation in color or quality of the product under display is minimized .
• Dramatically Lower Maintenance Costs - 60,000-hour LED source extends life 3 to 5times as compared to conventional HID sources, 30 times incandescent .
• Integrated Power Supply - Built into fixture allowing RLM to be connected directly toline voltage .
FINISH - Available in either architectural textured, high gloss or satin finish .
LEDS - Select high-brightness LEDs in Cool White (5300o K nominal), Neutral White (4100o K nominal), and Warm White (3500o K nominal) color temperature . 70 CRI (nominal) .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
MOUNTING - Fixed hub tapped for 3/4” NPT conduit . Pre-wired with 96” leads . Not designed for uplight applications .
REFLECTOR - Heavy duty spun galvanized steel construction with polyester powder coat finish .
ELECTRICAL - Integral power supply operates on 120-240 VAC (50/60Hz) input; no external power supplies required .
LIGHT OUTPUT - With an input power of 11 watts: Cool White - 1000 lumens (nominal), Neutral White - 750 lumens (nominal), and Warm White - 700 lumens (nominal) .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
DRIVER - State-of-the-art driver designed specifically for RLM fixtures provides unsurpassed system efficiency . Components are fully encased in potting material for moisture resistance . Driver complies with IEC and FCC standards .
OPTIONAL DIRECTIONAL OPTICS - Allows field adjustment of the light beam for directional illumination of signage .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations .
LSI ABOLITE® LED RADIAL WAVE (RWD)US patents D581584 & D598162 & D58158 and CN patent 2630873 and US & Int’l. patents pending
Also available in traditional light sources
DIMENSIONS
Prefix Height (A) Diameter (B) Neck ( C )
B
CA
Weight(lbs./kg)
RWD 200 7" 20" 3-3/4" 3.8 (178mm) (508mm) (95mm) (1.7kg)
Directional Optics Symmetrical Optics
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
131
IND
OO
R/O
UT
DO
OR
DE
SIG
NE
RLSI ABOLITE® LED RADIAL WAVE (RWD)
Prefix Options
RWD200 LED 120-2401CW - Cool WhiteNW - Neutral WhiteWW - Warm White
# ofLED’s
10 DO - Directional Optics3LDS96 WL - Factory prewired leads for use with stem or bracket mounting
CA120BLK2
CA120WHT2
CA120BLKS2
CA120WHTS2
RC72BLKS2
Color Temperature Light Source Input Voltage
MSV-Metallic Silver GWT-Gloss White GBK-Gloss Black GRD-Gloss Red GPT-Textured Graphite RUS-Textured Rust SCP-Satin Copper STQ-Satin Turquoise SVG-Satin Verde Green
Reflector Color Mounting
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
RWD 200 10 CW LED UE MSV LDS96 WL DO
BC600 3 GWT BC585 ZINC BC585SQ ZINC
CANOPY ORDERING INFORMATION (Accessories are field installed)
3/4" (19mm) Tap Decorative Box Cover Aligner - Gloss White3/4" (19mm) Tap Round Box Cover Aligner - Zinc3/4" (19mm) Tap Square Box Cover Aligner - Zinc
Description Order Number
CWBM 1 GWT CWBL 1 GWT DWB 1 GWT
WALL BRACKETS ORDERING INFORMATION (Accessories are field installed)
Contemporary Wall Bracket - Medium - Gloss White Contemporary Wall Bracket - Long - Gloss White Nostalgic Aluminum Wall Scroll Bracket - Gloss White
Description Order Number
ST 3 3 GWTST 6 3 GWTST 12 3 GWTST 18 3 GWTST 24 3 GWTST 36 3 GWTST 48 3 GWTST 60 3 GWTST 72 3 GWTCOP 3 GWT
CONDUIT SYSTEM ORDERING INFORMATION (Accessories are field installed)
3/4" x 3" (19mm x76mm) Aluminum Stem - Gloss White 3/4" x 6" (19mm x152mm) Aluminum Stem - Gloss White 3/4" x 12" (19mm x .4m) Aluminum Stem - Gloss White 3/4" x 18" (19mm x .5m) Aluminum Stem - Gloss White 3/4" x 24" (19mm x .6m) Aluminum Stem - Gloss White 3/4" x 36" (19mm x .9m) Aluminum Stem - Gloss White 3/4" x 48" (19mm x 1.2m) Aluminum Stem - Gloss White 3/4" x 60" (19mm x 1.5m) Aluminum Stem - Gloss White 3/4" x 72" (19mm x 1.8m) Aluminum Stem - Gloss White 3/4" (19mm) Alum. Stem Coupler - Gloss White
Description Order Number
- Standard BC600 finish is Gloss White Powder; other RLM colors available.
GB A 3 GWT GB B 3 GWT GB C 3 GWT GB D 3 GWT GB E 3 GWT GB F 3 GWT GB G 3 GWT GB H 3 GWT GB J 3 GWT GB K 3 GWT GB P 3 GWT GB U 3 GWT
GOOSE NECK BRACKETS ORDERING INFORMATION(Accessories are field installed)
3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White
Description Order Number
BRACKETS - See Indoor section for detail on bracket sizes and shapes. - Standard finish is Gloss White Powder; colors available. - Designed for mounting to recessed 4" (102mm) octagon box (by others).
- Standard finish is Gloss White Powder; other RLM colors available.
1- Fixture will not operate on 277VAC (120-240 only).2- Cordsets are damp location only. Cannot be used with DO option.3- Available with LDS96WL mounting only.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
132
IND
OO
R/O
UT
DO
OR
DE
SIG
NE
R
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
ARRAFunding Compliant
Suitable for wet locations
LSI ABOLITE® LED STANDARD DOME (RD)
APPLICATIONS - Ambient Lighting and Accent Lighting . Interior or Exterior .
PRODUCT HIGHLIGHTS
• “Green” Energy-Saving - Reduces greenhouse gas emissions, slashes operatingcosts, extends life and eliminates costly lamp disposal involving mercury waste .
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means degradation in color or quality of the product under display is minimized .
• Dramatically Lower Maintenance Costs - 60,000-hour LED source extends life 3 to 5times as compared to conventional HID sources, 30 times incandescent .
• Integrated Power Supply - Built into fixture allowing RLM to be connected directly toline voltage .
FINISH - Available in either architectural textured, high gloss or satin finish .
LEDS - Select high-brightness LEDs in Cool White (5300o K nominal), Neutral White (4100o K nominal), and Warm White (3500o K nominal) color temperature . 70 CRI (nominal) .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
MOUNTING - Fixed hub tapped for 3/4” NPT conduit . Pre-wired with 96” leads . Not designed for uplight applications .
REFLECTOR - Heavy duty spun galvanized steel construction with polyester powder coat finish .
ELECTRICAL - Integral power supply operates on 120-240 VAC (50/60Hz) input; no external power supplies required .
LIGHT OUTPUT - With an input power of 11 watts: Cool White - 1000 lumens (nominal), Neutral White - 750 lumens (nominal), and Warm White - 700 lumens (nominal) .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
DRIVER - State-of-the-art driver designed specifically for RLM fixtures provides unsurpassed system efficiency . Components are fully encased in potting material for moisture resistance . Driver complies with IEC and FCC standards .
OPTIONAL DIRECTIONAL OPTICS - Allows field adjustment of the light beam for directional illumination of signage .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
LISTING - Listed to U .S . and Canadian safety standards . Suitable for wet locations .
US patents D581584 & D598162 & D581585 CN patent 2630873 and US & Int’l. patents pending
Also available in traditional light sources
DIMENSIONS
Prefix Height (A) Diameter (B) Neck ( C )Weight
(lbs./kg)
RD 100 8-1/4" (210mm) 12" (305mm) 4-1/2" (114mm) 2.5 (1.13kg)RD 150 9-1/2" (241mm) 14" (356mm) 4-1/2" (114mm) 3.0 (1.36kg)RD 200 10" (254mm) 16" (406mm) 4-1/2" (114mm) 3.5 (1.59kg)RD 300 11" (279mm) 18" (457mm) 5" (127mm) 3.5 (1.59kg)
B
CA
Symmetrical Optics
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
133
IND
OO
R/O
UT
DO
OR
DE
SIG
NE
RLSI ABOLITE® LED STANDARD DOME (RD)
Prefix
RD 100RD 150RD 200RD 300
LED 120-2401CW - Cool WhiteNW - Neutral WhiteWW - Warm White
# ofLED’s
10 LDS96 WL - Factory prewired leads for use with stem or bracket mounting
CA120BLK2
CA120WHT2
CA120BLKS2
CA120WHTS2
RC72BLKS2
Color Temperature Light Source Input Voltage
MSV-Metallic Silver GWT-Gloss White GBK-Gloss Black GRD-Gloss Red GPT-Textured Graphite RUS-Textured Rust SCP-Satin Copper STQ-Satin Turquoise SVG-Satin Verde Green
Reflector Color Mounting
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
RD 200 10 CW LED UE MSV LDS96 WL
1- Fixture will not operate on 277VAC (120-240 only).2- Cordsets are damp location only.
BC600 3 GWT BC585 ZINC BC585SQ ZINC
CANOPY ORDERING INFORMATION (Accessories are field installed)
3/4" (19mm) Tap Decorative Box Cover Aligner - Gloss White3/4" (19mm) Tap Round Box Cover Aligner - Zinc3/4" (19mm) Tap Square Box Cover Aligner - Zinc
Description Order Number
CWBM 1 GWT CWBL 1 GWT DWB 1 GWT
WALL BRACKETS ORDERING INFORMATION (Accessories are field installed)
Contemporary Wall Bracket - Medium - Gloss White Contemporary Wall Bracket - Long - Gloss White Nostalgic Aluminum Wall Scroll Bracket - Gloss White
Description Order Number
ST 3 3 GWTST 6 3 GWTST 12 3 GWTST 18 3 GWTST 24 3 GWTST 36 3 GWTST 48 3 GWTST 60 3 GWTST 72 3 GWTCOP 3 GWT
CONDUIT SYSTEM ORDERING INFORMATION (Accessories are field installed)
3/4" x 3" (19mm x76mm) Aluminum Stem - Gloss White 3/4" x 6" (19mm x152mm) Aluminum Stem - Gloss White 3/4" x 12" (19mm x .4m) Aluminum Stem - Gloss White 3/4" x 18" (19mm x .5m) Aluminum Stem - Gloss White 3/4" x 24" (19mm x .6m) Aluminum Stem - Gloss White 3/4" x 36" (19mm x .9m) Aluminum Stem - Gloss White 3/4" x 48" (19mm x 1.2m) Aluminum Stem - Gloss White 3/4" x 60" (19mm x 1.5m) Aluminum Stem - Gloss White 3/4" x 72" (19mm x 1.8m) Aluminum Stem - Gloss White 3/4" (19mm) Alum. Stem Coupler - Gloss White
Description Order Number
- Standard BC600 finish is Gloss White Powder; other RLM colors available.
COG 12 MSV COG 14 MSV COG 16 MSV COG 18 MSV
WIRE GUARD ORDERING INFORMATION (Accessories are field installed)
12" (.3m) Convex Wire Guard - Metallic Silver 14" (.4m) Convex Wire Guard - Metallic Silver 16" (.4m) Convex Wire Guard - Metallic Silver 18" (.5m) Convex Wire Guard - Metallic Silver
Description Order Number
- Standard finish is Metallic Silver Powder; other RLM colors available.
GB A 3 GWT GB B 3 GWT GB C 3 GWT GB D 3 GWT GB E 3 GWT GB F 3 GWT GB G 3 GWT GB H 3 GWT GB J 3 GWT GB K 3 GWT GB P 3 GWT GB U 3 GWT
3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White 3/4" (19mm) Aluminum Gooseneck Bracket - Gloss White
BRACKETS - See Indoor section for detail on bracket sizes and shapes. - Standard finish is Gloss White Powder; colors available. - Designed for mounting to recessed 4" (102mm) octagon box (by others).
- Standard finish is Gloss White Powder; other RLM colors available.
GOOSE NECK BRACKET ORDERING INFORMATION(Accessories are field installed)
Description Order Number
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
134
IND
OO
R/O
UT
DO
OR
DE
SIG
NE
RLSI ABOLITE GOOSENECK AND WALL BRACKETS
GB K 3 GWT - 3/4" Single Reflector Gooseneck Wall Bracket . Features rigid conduit and cast wall plate which fits 4" octagonal box (by other) . The bracket features a gloss white powder finish .
GB J 3 GWT - 3/4" Single Reflector Gooseneck Wall Bracket . Features rigid conduit and cast wall plate which fits 4" octagonal box (by other) . The bracket features a gloss white powder finish .
GB P 3 GWT - 3/4" Single Reflector Gooseneck Wall Bracket . Features rigid conduit and cast wall plate which fits 4" octagonal box (by other) . The bracket features a gloss white powder finish .
CWBM 1 GWT and CWBL 1 GWT - Contemporary Wall Bracket with gloss white powder finish .
Replacement CA 5 - Gloss white powder finish (other colors available) .
• Mounts to recessed 4” octagon box (by others) .
DWB 1 GWT - Single Reflector Wall Bracket . Four 5/16” diameter holes are provided for wall mounting The bracket features a gloss white powder finish .
GB U 3 GWT - 3/4" Single Reflector Gooseneck Wall Bracket . Features rigid conduit and cast wall plate which fits 4" octagonal box (by other) . The bracket features a gloss white powder finish .
12-5/8"(321mm)
12-5/8"(321mm)
+
39"(991mm)
2-1/2"(64mm)
+
25-1/4"(641mm)
9" (229mm)
9" (229mm)
+ 3" (76mm)
41-3/16"(1046mm)
R 4-1/2" (114mm)
3" (76mm)
15
ABOLITE
LIGHTING
3-1/2"(89mm)
1-3/4"(44mm)
3/16" (5mm) Holes
Accepts 3/4" Conduit
3/8" Set Screws
4-3/4"(121mm)
18-1/4"(464mm)
6" (152mm)
9"(229mm)
5"(127mm)
Mounting Hole Centers
4" (102mm)
23-7/8"(606mm)
19-3/4"(502mm)
8" (203mm)
23"(584mm)
20"(508mm)
R 9" 9229mm) 20"(508mm)
5-1/2"(140mm)
5-1/2"(140mm)
4-7/8"(124mm)
4-7/8"(124mm)
4"(102mm)
10-1/4"(260mm)
10-1/4"(260mm)
14"(356mm)
CWBM 1 GWT CWBL 1 GWT
R 6" (152mm)
11" (279mm)11" (279mm)
37-1/2"(953mm)
1-3/8" (35mm)
3/4"NPT
3/4" NPT
3/4" NPT
3/4" NPT
3/4" NPT
4-1/2"(114mm)
ARRAFunding Compliant
Project Name
Catalog #135
THIS PAGE LEFT INTENTIONALLY BLANK
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
136
INTE
RIO
R A
MB
IEN
TLED HIGH BAY (XHB3) 128
SMARTTEC™ ENERGY SAVING FEATURES:
THERMAL CONTROL - Sensors in the driver enclosure and optical unit reduce drive current when elevated ambient temperatures increase LED temperatures above design limits .
INTEGRAL MOTION SENSOR (IMS) - Choice of 2 optional internal passive infrared motion sensor activated switching of luminaire light levels, either 0 or 30% of power . High level light is activated when activity is sensed in target zone . High light level is increased to full bright in 1-2 seconds upon detection . Low light level (0 or 30% of power) is activated when target zone is absent of motion activity for ~ 2 minutes . Upon inactivity, light level is gradually ramped down (10-15 sec .) to low level to allow eyes time to adjust .
DIMMING (DIM) - 0-10 volt dimming enabled, with controls by others .BI-LEVEL SWITCHING (BLS) - Bi-level switching responds to external line voltage signal
from separate controller or sensor (by others), with low light level decreased to 30% maximum drive current .
EXPECTED LIFE - Up to 100,000 hours . See LSI web site for specific guidance .
LEDS - An array with 128 LEDs, which feature select high-brightness LEDs in Cool White (5300°K) or Neutral White (4100°K) color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Available in 350mA and 450 mA .
DISTRIBUTION/PERFORMANCE - Symmetric or asymmetric distribution – high efficiency reflectors provide exceptional uniformity and vertical illumination without glare . Optional diffused lens available to reduce visibility of diodes .
HOUSING - Housing is die-formed aluminum . Designed to resist birds and accumulation of dust and debris . Access panel provides one-screw access to driver and wiring connections .
OPTICAL UNIT - Featuring an ultra-slim 1” profile, housing is die-formed aluminum with a clear tempered glass lens . Unit is water-resistant, sealed to an IP67 rating . Patented integral single blade heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
THE INDUSTRY’S ONLY BREATHABLE SEAL - Teflon® breather allows super-tight IP67 protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals and components .
MOUNTING - Hook and 6’ cord (plug not included) or 3/4” pendant mount are available . Fixture weight less than 30 lbs .
ELECTRICAL - Available with universal voltage power supply (120-277 VAC, 50/60 Hz input), 347 VAC and 480 VAC . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
DRIVER - Proprietary, state-of-the-art SmartTec™ driver technology provides unsurpassed system efficiency, control and protection . LSI components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40°C to +40°C (-40°F to 104°F) .
FINISH - Standard color is white . Finished with LSI’s DuraGrip® polyester powder coat process .
WARRANTY - Limited 5-year warranty .
LISTING - ETL listed to UL1598, UL 8750 and other U .S . and international safety standards . Suitable for damp locations .
PHOTOMETRICS - Application layouts are available upon request . Contact lighting .apps@lsi-industries .com .
US patent 7,828,456 and US & Int’l. patents pending
Suitable for damp locations
IP67 ARRAFunding Compliant
S AL Watts
LIGHT OUTPUT - XHB3 128Lumens (Nominal)# of LEDS
350 mA 128 16497 15849 145450 mA 128 19073 19298 192
350 mA 128 14131 14453 145450 mA 128 17021 17741 192
Cool
Whi
teNe
utra
l Whi
te
SHIPPING WEIGHTS - XHB3347 480UE
25.6 30.2 30.2
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
enabled
enabled
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
137
INTE
RIO
R A
MB
IEN
T
Prefix FinishMountingColorTemperature
XHB3 LED 128 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - Universal Voltage
(120-277v)
347-480 - Univ.Voltage
(347-480v)
WHT - White
Sensor/OptionsOptional ControlsLightSource
Distribution # ofLEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XHB3 S LED 128 450 CW UE HM6 WHT
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
EM01825
XHB3 PCSXHB3 128 WG
Cast Mounting Hook Polycarb ShieldWire Guard
Description Order Number Order Number
FOOTNOTES:1 - DIM and BLS cannot be ordered together. 2 - Do not specify for satellite units. 3 - Not compatible with Virtinet wireless systems
350 - 350mA450 - 450mA
DriveCurrent
SensorES2 - External SensorIMS03 - Integral Motion Sensor (Turns Off)IMS303 - Integral Motion Sensor (Dims to 30%)
OptionsDFL - Diffused Lens4
C/F6
C/F6
C/F6
C/F6
ROSB120 - WL Remote Box with 120V Occupancy SensorROSB277 - WL Remote Box with 277V Occupancy Sensor RPSB120 - WL Remote Box with 120V External PhotocellRPSB208-277 - WL Remote Box with 208-277V External Photocell
Description
S - Type SSymmetric
AL - Asymmetric
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM1 - 0-10V Dimming (from external signal)BLS1 - Bi-level Switching (from external signal)
4 - Diffused lens reduces light output. Consult factory.5 - Cast mounting hook compatible with pendant option only. Must be ordered separately.6 - Includes VCM. To be used in conjunction with VCM options in fixture. Consult factory.
HM6 - Hook and 6' Cord
PM - Pendant Mount (3/4”)
LED HIGH BAY (XHB3) 128
DIMENSIONS
9 7/8”(251mm)
12 1/2”(317mm)
11 1/2”(292mm)
21 7/8”(556mm)
1”(25mm)
15-7/8”(403mm)
15-7/8”(403mm)
21-9/16”(548mm)
12-3/8”(314mm)
POLYCARB SHEILD
9/16”(14mm)
2 1/8”(54mm)
21 7/8”(556mm)
Cast Mounting Hook
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
138
INTE
RIO
R A
MB
IEN
TLED HIGH BAY (XHB3) 176
SMARTTEC™ ENERGY SAVING FEATURES:
THERMAL CONTROL - Sensors in the driver enclosure and optical unit reduce drive current when elevated ambient temperatures increase LED temperatures above design limits .
INTEGRAL MOTION SENSOR (IMS) - Choice of 2 optional internal passive infrared motion sensor activated switching of luminaire light levels, either 0 or 30% of power . High level light is activated when activity is sensed in target zone . High light level is increased to full bright in 1-2 seconds upon detection . Low light level (0 or 30% of power) is activated when target zone is absent of motion activity for ~ 2 minutes . Upon inactivity, light level is gradually ramped down (10-15 sec .) to low level to allow eyes time to adjust .
DIMMING (DIM) - 0-10 volt dimming enabled, with controls by others .BI-LEVEL SWITCHING (BLS) - Bi-level switching responds to external line voltage signal
from separate controller or sensor (by others), with low light level decreased to 30% maximum drive current .
EXPECTED LIFE - Up to 100,000 hours . See LSI web site for specific guidance .
LEDS - An array with 176 high brightness LEDs; Cool White (5300oK) or Neutral White (4100oK) color temperature, 70 CRI (nominal) .
DRIVE CURRENT - Available in 350mA and 450 mA .
DISTRIBUTION/PERFORMANCE - Symmetric or asymmetric distribution – high efficiency reflectors provide exceptional uniformity and vertical illumination without glare . Optional diffused lens available to reduce visibility of diodes .
HOUSING - Housing is die-formed aluminum . Designed to resist birds and accumulation of dust and debris . Access panel provides one-screw access to driver and wiring connections .
OPTICAL UNIT - Featuring an ultra-slim 1” profile, housing is die-formed aluminum with a clear tempered glass lens . Unit is water-resistant, sealed to an IP67 rating . Patented integral single blade heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
THE INDUSTRY’S ONLY BREATHABLE SEAL - Teflon® breather allows super-tight IP67 protection while preventing temperature cycling from building up internal pressures and vacuums that can stress optical unit seals and components .
MOUNTING - Hook and 6’ cord (plug not included) or 3/4” pendant mount are available . Fixture weight less than 35 lbs .
ELECTRICAL - Available with universal voltage power supply (120-277 VAC, 50/60 Hz input), 347 VAC and 480 VAC . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
DRIVER - Proprietary, state-of-the-art SmartTec™ driver technology provides unsurpassed system efficiency, control and protection . LSI components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40°C to +40°C (-40°F to 104°F) .
FINISH - Standard color is white . Finished with LSI’s DuraGrip® polyester powder coat process .
WARRANTY - Limited 5-year warranty .
LISTING - ETL listed to UL1598, UL 8750 and other U .S . and international safety standards . Suitable for damp locations .
PHOTOMETRICS - Application layouts are available upon request . Contact lighting .apps@lsi-industries .com .
US patent 7,828,456 and US & Int’l. patents pending
Suitable for damp locations
IP67SHIPPING WEIGHTS
347 480UE
30.6 35.2 35.2
ARRAFunding Compliant
S AL Watts
LIGHT OUTPUT - XHB3 176Lumens (Nominal)# of LEDS
350 mA 176 21686 21464 197450 mA 176 26219 26663 259
350 mA 176 18197 18130 197450 mA 176 22346 21669 259
Cool
Whi
teNe
utra
l Whi
te
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
enabled
enabled
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
139
INTE
RIO
R A
MB
IEN
T
Prefix FinishMountingColorTemperature
XHB3-HighBay
LED 176 CW - Cool WhiteNW - Neutral White
Input Voltage
UE - Universal Voltage
(120-277v)
347-480 - Univ.Voltage
(347-480v)
WHT - White
Sensor/OptionsOptional ControlsLightSource
Distribution # ofLEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XHB3 S LED 176 450 CW UE HM6 WHT
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
EM01826
XHB3 176 WGC/F7
Cast Mounting Hook Wire GuardROSB120 - WL Remote Box with 120V Occupancy Sensor
Description Order Number Order Number
FOOTNOTES:1 - Consult factory for availability.2 - DIM and BLS cannot be ordered together. 3 - Do not specify for satellite units. 4 - Not compatible with Virtinet wireless systems
350 - 350mA450 - 450mA
DriveCurrent
SensorES3 - External SensorIMS04 - Integral Motion Sensor (Turns Off) IMS304 - Integral Motion Sensor (Dims to 30%)
OptionsDFL - Diffused Lens5
C/F7
C/F7
C/F7
ROSB277 - WL Remote Box with 277V Occupancy Sensor RPSB120 - WL Remote Box with 120V External PhotocellRPSB208-277 - WL Remote Box with 208-277V External Photocell
Description
S - Type SSymmetric
AL - Asymmetric1
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM2 - 0-10V Dimming (from external signal)BLS2 - Bi-level Switching (from external signal)
5 - Diffused lens reduces light output. Consult factory.6 - Cast mounting hook compatible with pendant option only. Must be ordered separately.7 - Includes VCM. To be used in conjunction with VCM options in fixture. Consult factory.
HM6 - Hook and 6' Cord
PM - Pendant Mount (3/4”)
LED HIGH BAY (XHB3) 176
DIMENSIONS12 1/4 [312 mm]
13 1/2 [341 mm]10 7/8 [277 mm]
24 1/8 [613 mm]
2 1/8 [53 mm]
24 1/8 [612 mm] 14.01
23.10
23.13
4.08
23.53
Cast Mounting Hook
176 LED XHB3 Wire Guard
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
140
INTE
RIO
R A
MB
IEN
TLED HIGH EFFICIENCY, EXPANSIVE CAVITY RECESSED (ASC)
PRODUCT HIGHLIGHTS
• Specifically designed to spread uniform illumination throughout the room cavity from ceiling to floor .
• Long life, high brightness LEDs virtually eliminate maintenance .
• RoHS compliant, recyclable design has no mercury or other hazardous materials
• Cooler running electronic components allow for improved lumen performance .
EXPECTED LIFE - Projected life of at least 60,000 hours . Contact factory for TM-21 detail .
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and provides uniform lens luminance . Available in Cool White (5300oK), Neutral White (4100oK) and Warm White (3500oK) color temperatures . CRI >= 80 . LM-80 reports available .
HOUSING - Formed code-gauge steel housing, painted after fabrication . Integral NEC- compliant earthquake clips are standard.
LENS - Specially designed frosted extruded acrylic lens with micro prisms for maximum source diffusion and soft, even illumination .
INSTALLATION - Unit simply lifts through grid ceiling and rests on T-bars . Wiring access/strain relief plate attaches with one screw, allowing connections to be made from below the ceiling .
ELECTRICAL- Universal voltage (120-277 Vac) input, 50/60 Hz . Power factor > 0 .9, THD < 20%, in-rush current < 15 Amps .
DRIVER - High-performance isolated driver features over-voltage, over-current and short-circuit (with auto-recovery) protection . Driver module is sealed to IP66 protection levels, with a Class A sound rating . 0-10 volt dimming standard .
OPERATING TEMPERATURE - -40oC to +40oC (-40oF to +104oF)
FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Finish coating of housing reflecting surfaces is with high-reflectance (minimum 92%) polyester powder . Matte white reflectors for soft indirect light distribution .
WARRANTY - Limited 5-year warranty .
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data .
LISTING - Listed to UL1598 and other U .S . and Canadian safety standards .
DIMENSIONS
LIGHT OUTPUT - ASC
WW248039902490
258044402530
Description2 x 22 x 41 x 4
SS - Super Saver HO - High Output NW
303048052980
CW WW293048902965
303554003010
NW360059103530
CW SS304530
375437
HO Watts
Prefix Color Temperature
ASC22 - (2X2) ASC24 - (2X4) ASC14 - (1X4)
LED SS -Super SaverHO - High Output
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
Input Voltage
UE - Universal Input Voltage(120-277V)
Options
EM - 1100 Lm EmergencyFC-1 - 6'x3/8" (3) #18 leadsCPL - Chicago Plenum
Light Source
(blank) - Acrylic
Shield
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
ASC22 LED SS NW UEDrive Current
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
FK22FK24FK14
Flange Kit - 2x2Flange Kit - 2x4Flange Kit - 1x4
Description Order Number
3-1/2"(89 mm)
23-3/4" (604 mm)2x4 1x4
3-1/2"(89 mm)
11-5/8" (295 mm)
ARRAFunding Compliant
dry location
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
141
INTE
RIO
R A
MB
IEN
T
Prefix Color Temperature
LEDPEC14 - (1x4)PEC22 - (2x2)PEC24 - (2x4)
SS -Super SaverHO - High Output
VHO - Very High Output1
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
Input Voltage
UE - 120-277VUniversal Input Voltage
OptionsLight Source
LPW - Louvered Perforated WhiteRAD - Round Acrylic Diffuser
Shield
FC-1 - 6’ 3/8” (3) #18 leadsEM - 1100 LM EmergencyCPL - Chicago PlenumDIM - 0-10V Dimming
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
PEC24 LED SS LPW WW UEDrive Current
1 - 2 x 4 only
PRODUCT HIGHLIGHTS
• Available with up to 9400 lumens (VHO-CW)
• Direct/Indirect unit with balanced illumination and superior, low angle brightnesscontrol
• Long life, high brightness LEDs virtually eliminate maintenance.
• RoHS compliant, recyclable “green” design contains no mercury or other hazardousmaterials .
• Cooler running electronic components allow for improved lumen performance.
EXPECTED LIFE - Projected life of at least 60,000 hours . Contact factory for TM-21 detail .
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and provides uniform lens luminance . Available in Cool White (5300oK), Neutral White (4100oK) and Warm White (3500oK) color temperatures . CRI >= 80 . LM-80 reports available .
HOUSING - Formed code-gauge steel housing, painted after fabrication . Integral NEC- compliant earthquake clips are standard.
LENS - Choice of perforated metal shield with flat blade louver (LPW) or high transmittance acrylic with built-in litter and debris protection (RAD) .
INSTALLATION - Unit simply lifts through grid ceiling and rests on T-bars . Wiring access/strain relief plate attaches with one screw, allowing connections to be made from below the ceiling .
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz . Power factor > 0 .9, THD < 20%, in-rush current < 15 Amps .
INPUT POWER - 2x2: 35 watts (SS); 45 watts (HO) 2x4: 44 watts (SS); 55 watts (HO); 86 watts (VHO)
DRIVER – High-performance isolated driver features over-voltage, over-current and short-circuit (with auto-recovery) protection . Driver module is sealed to IP66 protection levels, with a Class A sound rating .
FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Finish coating of housing reflecting surfaces is with high-reflectance (minimum 92%) polyester powder . Matte white reflectors for soft indirect light distribution .
WARRANTY - Limited 5-year warranty .
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data .
LISTING - Listed to UL1598 and other U .S . and Canadian safety standards .
LED PEAK EFFICIENCY RECESSED DIRECT/INDIRECT (PEC)
ARRAFunding Compliant
This product, or selected versions of this product, meet the standards listed below.
Please consult factory for your specific requirements.
LIGHT OUTPUT - LED PEC
WW236030104190
271030504370
Description1 x 42 x 22 x 4
2 x 4
SS - Super Saver
VHO - Very High Output
HO - High Output NW
300035505040
CW
WW7800* 8500*
* Calculated valuesconsult factory
NW9420CW
WW299039405120
325040105340
NW360046306140
CW SS273544
344555
HO Watts
VHO86
Watts
Lumens (RAD Lens)
RPW - RoundPerforated White Shield
LPW - Louvered Perforated White Shield
MPW - Margin Perforated White Shield
LSW - Linear SlottedWhite Shield
RPSS - Round PerfSplit Shield
RAD - Round Acrylic Diffuser
RPW - RoundPerforated White Shield
LPW - Louvered Perforated White Shield
MPW - Margin Perforated White Shield
LSW - Linear SlottedWhite Shield
RPSS - Round PerfSplit Shield
RAD - Round Acrylic Diffuser
5-1/16"(129mm)
23-3/4"(603mm)
dry location
ACCESSORY ORDERING INFORMATION
Description(Accessories are field installed)
Order NumberFlange Kit - 2x2Flange Kit - 1x4
FK22FK14
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
142
INTE
RIO
R A
MB
IEN
T
PRODUCT HIGHLIGHTS
• Long life, high brightness LEDs virtually eliminate maintenance.
• Cam action latches and die formed T-hinges for door insertion from either side.
• Die-formed flat steel door with mitered look corners for clean appearance
• 3 ¼” deep housing with hemmed edges on sides for safe handling
EXPECTED LIFE - Projected life of at least 60,000 hours . Contact factory for TM-21 detail .
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and provides uniform lens luminance . Available in Cool White (5300°K), Neutral White (4100°K) and Warm White (3500°K) color temperatures . CRI >= 80 . LM-80 reports available .
CONSTRUCTION - Housing constructed of structurally embossed, heavy gauge, cold rolled steel . Wireway covers snap in for easy attachment and removal . Access plate provides top access to wireway .
LENS - Available with 0 .125 thick pattern 12 (A) full width or 0 .080” thick flat white (TSLR) acrylic lens . TSLR lens is split and angled towards center bar . Other lenses available, consult factory .
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz . Power factor > 0 .9, THD < 20%, in-rush current < 15 Amps .
FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Finish coating of housing reflecting surfaces is with white, high reflectance (minimum 92%) polyester powder .
DRIVER – High-performance isolated driver features over-voltage, over-current and short-circuit (with auto-recovery) protection . Driver module is sealed to IP66 protection levels, with a Class A sound rating . 0-10 volt dimming standard .
WARRANTY - Limited 5-year warranty .
LISTING - Listed to UL1598 and other U .S . and Canadian safety standards .
HIGH EFFICIENCY LED TROFFER - STATIC - GA24 / GA22
ARRAFunding Compliant
This product, or selected versions of this product, meet the standards listed below.
Please consult factory for your specific requirements.
3-1/4"(89mm)
23-3/4"(603mm)
3-1/4"(89mm)
23-3/4"(603mm)
dry location
TYPICAL ORDER EXAMPLE:
Prefix
LUMINAIRE ORDERING INFORMATION
Options
GA24 LED SS NW UE TSLR
ACCESSORY ORDERING INFORMATIONDescription
(Accessories are field installed)
FC1 - 6’ 3/8” flex, 3 #18 leads (other types available)JP - Job packed without cartonsEM - Emergency PackP12 - Pattern 12 Acrylic TSLR - Flat White Acrylic (2pc)
GA24(2x4)
GA22(2x2)
Order NumberFlange Kit - 2x4Flange Kit - 2x2
FK24FK22
Color Temperature
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
Input Voltage
UE - 120-277VUniversal Input Voltage
LED
Light Source
SS -Super SaverHO - High OutputVHO - Very High Output
Drive Current
Lumens Watts LPW2 x 4 2 x 2
SS
HO
VHO
LIGHT OUTPUT - GA24 (A- Pattern 12 Acrylic)
Neut
ral W
hite 4450
5390
8270
455788
999594
Lumens Watts LPW
2610
3010
4160
293544
908695
A - Pattern 12 Acrylic Option
TTLR - TTLR Option
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
143
INTE
RIO
R A
MB
IEN
T
Light Source Lumen Output OptionsLine VoltageDistributionLengthPrefix
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
EG3 4 S LED HO CW UE
EG3 - LEDEnclosed& Gasketed
S - Symmetric4 - 4 foot8 - 8 foot
HO - High OutputLED
Color Temp
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
TP - Tamper resistant latches and screwsSL - Stainless Steel latches6CNP - 6' foot white cord, no plugEM - 1100 Lm Emergency
UE- Universal Voltage(120-277V)
(2) snap-on bails & (2) 10’ aircraft cables(2) snap-on bails & (2) 3’ jack chains(2) snap-on bails & (2) 5’ jack chainsStainless Steel 45o mounting bracket
EG34ACEGCHSEGCHS5EG45MB
ACCESSORY ORDERING INFORMATIONDescription Order Number
PRODUCT HIGHLIGHTS
• Long life, high brightness LEDs virtually eliminate maintenance .
• RoHS compliant, recyclable “green” design contains no mercury or other hazardousmaterials .
• Cooler running electronic components allow for improved lumen performance.
• Unique door and housing design allows for improved fixture maintenance, lensreplacement and accessibility to power source from below ceiling .
• High angle distribution throws light on walls near ceiling to fill the space with light
EXPECTED LIFE - Projected life of at least 60,000 hours . Contact factory for TM-21 detail .
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and provides uniform lens luminance . Available in Cool White (5300oK) CRI>70, Neutral White (4100oK) and Warm White (3500oK) color temperatures . CRI >85 . (All values nominal .) LM-80 reports available .
HOUSING - Formed code-gauge steel housing, painted after fabrication . Integral NEC- compliant earthquake clips are standard.
LENS - Proprietary, high-diffusion opal lens eliminates bright spots from individual LEDs and provides high vertical illumination while still providing high visual comfort . Made from impact-resistant acrylic .
DOOR - Die-formed post-painted steel door with positive cam latches (painted after fabrication) provides easy access to LEDs, driver and wiring connections . Optional regressed aluminum door has spring-loaded latches .
INSTALLATION - Unit simply lifts through grid ceiling and rests on T-bars . Wiring access/strain relief plate attaches with one screw, allowing connections to be made from below the ceiling .
ELECTRICAL 120 thru 240 VAC, 50/60 Hz input .
DRIVER – 70-watt Class II driver is mounted inside housing (no external driver box) . Case temperature - 80oC max . Power factor > 0 .9 THD < 20% .
OPERATING TEMPERATURE - -40oC to +40oC (-40oF to +104oF)
FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Finish coating of housing reflecting surfaces is with high-reflectance (minimum 92%) polyester powder .
WARRANTY - Limited 5-year warranty .
PHOTOMETRICS - LM-79 and LM-80 reports, as well as application layout assistance are available on request . Contact LSI Applications Group or lighting .apps@lsi-industries .com .
LISTING - Listed to UL1598 and other U .S . and Canadian safety standards .
LED RECESSED TROFFER (XRT)
Prefix Color Temperature
XRT22 - 2X2 LED Recessed Troffer
XRT14 - 1X4 LED Recessed Troffer
LED 48 CW - Cool WhiteNW - Neutral WhiteWW - Warm White
Input Voltage
120-240VUniversal Input Voltage
Options
RA - Regressed aluminum doorw/spring-loaded latches
Light Source # of LEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XRT22 LED 48 400 CW 120-240
300 - 300mA400 - 400mA
Drive Current
ACCESSORY ORDERING INFORMATION
Description(Accessories are field installed)
Order NumberFlange Kit - 2x2Flange Kit - 1x4
FK22FK14 ARRA
Funding Compliant
This product, or selected versions of this product, meet the standards listed below.
Please consult factory for your specific requirements.
5”(127mm)
23-3/4” square(603mm)
2 X 2
1 X 4 (47-7/8” long)
10-5/8”(270mm)
11-5/8”(295mm)
(64mm)2-1/2”
5”(127mm)
47.88(1216 mm)
LIGHT OUTPUT - XRT
4X1 2X2300mA400mA
35004350
38504700
Lumens (Nominal) (CW)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
144
INTE
RIO
R A
MB
IEN
TLED DOME WRAP - SURFACE / PENDANT MOUNT - DW
PRODUCT HIGHLIGHTS
• Rounded Lens for unique appearance.
• Flexible lens allows for easy access to install and service .
• Driver cover held in place with quarter turn fasteners for easy access .
• Small size allows for installation in small spaces .
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and provides uniform lens luminance . Available in Cool White (5300°K), Neutral White (4100°K) and Warm White (3500°K) color temperatures . CRI >= 80 . LM-80 reports available .
CONSTRUCTION - Fixture housing, lampholder brackets, and sections and reflector constructed of code-gauge die-formed steel .
LENS - Frosted, acrylic lens, .100 thick .
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz . Power factor > 0 .9, THD < 20%, in-rush current < 15 Amps .
DRIVER – High-performance isolated driver features over-voltage, over-current and short-circuit (with auto-recovery) protection . Driver module is sealed to IP66 protection levels, with a Class A sound rating .
FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Finish coating of housing reflecting surfaces is with white, high reflectance (minimum 92%) polyester powder .
WARRANTY - Limited 5-year warranty .
LISTING - UL Listed to U .S . and Canadian safety standards . Suitable for damp locations . IBEW Union made in the U .S .A
DW LED SS -Super SaverHO - High Output
Prefix OptionsColor TemperatureDrive Current
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
DIM - 0-10V DimmingEM - Emergency PackBOREORMOR
Row Mounting AvailableConsult Factory
LightSource Voltage
UE - Universal Electronic
(120-277V)
347-347V
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
DW LED SS CW UE EM
ACCESSORY ORDERING INFORMATIONDescription
(Accessories are field installed)Order Number
Pendant Mount Kit (3/8” IP Stems)3” Chain & Large V-hook5” Chain & Large V-hook
PMKCHS3CHS5
3-3/8"(86mm)
9-1/2"(243mm)
Lumens Watts LPW
SS
HO
LIGHT OUTPUT - LED DW
Neut
ral W
hite 4500
5400
4458
10293
ARRAFunding Compliant damp location
DIMENSIONS
This product, or selected versions of this product, meet the standards listed below.
Please consult factory for your specific requirements.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
145
INTE
RIO
R A
MB
IEN
TLED LOW PROFILE WRAPAROUND - WNAPRODUCT HIGHLIGHTS
• Available in nominal 10” and 14” widths
• Economical low profile design
• Wide, even light distribution
EXPECTED LIFE - Projected life of at least 60,000 hours . Contact factory for TM-21 detail .
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and provides uniform lens luminance . Available in Cool White (5300°K), Neutral White (4100°K) and Warm White (3500°K) color temperatures . CRI >= 80 . LM-80 reports available .
CONSTRUCTION - Housing constructed of 20 gauge die formed cold rolled steel . Wire way cover snaps in for easy removal . End plates riveted to housing . Equipped with knockout for nipple insertion .
LENS - Frosted, impact-resistant acrylic, hingeable from either side . Exterior surface of lens bottom embossed with prisms, sides embossed with internal prisms for low-brightness illumination .
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz . Power factor > 0 .9, THD < 20%, in-rush current < 15 Amps .
DRIVER – High-performance isolated driver features over-voltage, over-current and short-circuit (with auto-recovery) protection . Driver module is sealed to IP66 protection levels, with a Class A sound rating .
FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Finish coating of housing reflecting surfaces is with white, high-reflectance (minimum 92%) polyester powder .
WARRANTY - Limited 5-year warranty .
LISTING - UL Listed to U .S . and Canadian safety standards . Suitable for damp locations . IBEW Union made in the U .S .A
2-5/8"(66mm)
2-3/4"(70mm)
9-7/8" (257mm)
14-3/8" (367mm)
WNA10 - NARROW BODY
WNA14 - WIDE BODY
WNA10 - Narrow Body
WNA14 - Wide Body
LED SS -Super SaverHO - High Output
HO - High OutputVHO - Very High Output
Prefix OptionsColor TemperatureDrive Current
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
DIM - 0-10V DimmingEM - Emergency Pack
LightSource Voltage
UE - Universal Electronic
(120-277V)
347 - 347V
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
WNA10 LED SS CW UE EM
ACCESSORY ORDERING INFORMATIONDescription
(Accessories are field installed)Order Number
Pendant Mount Kit (3/8” IP Stems) PMK
Lumens Watts LPWWNA 10 WNA 14
SS
HO
VHO
LIGHT OUTPUT - LED WNA
Neut
ral W
hite 3520
5470
-
3355-
10799-
Lumens Watts LPW
-
5760
8640
-5689
-10397
ARRAFunding Compliant damp location
DIMENSIONS
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
146
INTE
RIO
R A
MB
IEN
TLED INTERIOR RETAIL CEILING LIGHT (CIRU)
SMARTTEC™ ENERGY SAVING FEATURES
THERMAL CONTROL - LSI drivers feature integral sensor which reduces drive current, when ambient temperatures exceeds rated temperature .
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal .
LEDS - Features a choice of two arrays of select, mid-power, high brightness, high efficiency LED chips; CW - 5300°K color temperature, 70 CRI (nominal) or NW - 4100oK color temperature, 80 CRI (nominal) .
DRIVE CURRENT - Choice of Low Wattage (LW), Mid Wattage (MW), Super Saver (SS), High Output (HO), or Very High Output (VHO) .
OPTICS / DISTRIBUTION - Available with (SC) standard ceiling distribution, which directs light through a clear tempered glass lens, to provide a uniform distribution of light to vertical and horizontal surfaces .
OPTICAL UNIT - Features an ultra-slim 3/4” profile die cast housing, with a clear tempered glass lens . Unit is water-resistant, sealed to an IP67 rating . Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture .
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure .
DRIVER - State-of-the-art driver technology superior energy-efficiency and optimum light output . LSI driver components are fully encased in potting for IP65 moisture resistance . Complies with IEC and FCC standards .
DRIVER HOUSING - Fabricated aluminum, driver/electrical enclosure is mounted to back of optical assembly to provide easy “knock-out” connection of primary wiring .
OPERATING TEMPERATURE - -40°C to 40°C (-40°F to +104°F)
ELECTRICAL - Voltage specific power supply, 120-277 VAC, 50/60 HZ input . LSI drivers meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C .
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process . DuraGrip withstands extreme weather changes without cracking or peeling .
INSTALLATION - Pre-assembled standard unit installs in interior T-bar grid ceiling applications via a choice of 2x2 mounting pan or flange kit . Accessory flange kit available for installing in drywall or plaster . Low profile design minimizes clearance requirements .
SHIPPING WEIGHT - 20 pounds .
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
WARRANTY - Limited 5-year warranty .
LISTING - UL listed to UL 1598, UL 8750 and other U .S . and International safety standards . Suitable for damp locations .
PHOTOMETRICS - Applications layouts are available upon request .
US patents 8382334, 8215799, 7952293 and US & Int’l. patents pending.
Lumens Watts LPW
LW - Low WattMW - Mid WattSS - Super SaverHO - High OutputVHO - Very High Output
LIGHT OUTPUT - CIRU
Cool
Whi
te
8,43811,64213,63817,00120,992
76103129149192
111113106114109
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
IP65
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
147
INTE
RIO
R A
MB
IEN
T
TYPICAL ORDER EXAMPLE:
Prefix Distribution Light Source Drive Current
LUMINAIRE ORDERING INFORMATION
LineVoltage
120 - 120V208 - 208V240 - 240V277 - 277V347 - 347V3
LED LW - Low WattSS - Super SaverHO - High Output2
VHO - Very High Output2
SC - StandardCIRU- Crossover Interior Retail Ceiling
EUR CIRU5- Europe Crossover Interior Retail Ceiling
CIRU SC LED HO NW 120 2x2 WHT DFL
ColorTemperature FinishMounting
WHT - White
Options
DIM - 0-10v Dimming2 DFL - Diffused Lens
CW - Cool WhiteNW - Neutral White
2x2 - 2x2 T-bar Grid Ceiling
FOOTNOTES:1 - Consult Factory 2 - 0-10v Dimming available. Consult Factory for MW drive current. 3 - 347 available in HO mA only. 4 - FK22 is used for mounting to Sheetrock or Drywall ceilings. It requires attaching via framing members or suspending from structure. 5 - EUR CIRU designed for export into European Countries and requires CE, TB, Weee & C/O labels. 600mm x 600mm dimensions.
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
FK2242x2 Flange KitDescription Order Number
LED INTERIOR RETAIL CEILING LIGHT (CIRU)
DIMENSIONS 10 3/8”(262 mm)
6”(155 mm)
20 3/4”(528 mm)
23 3/4”(604 mm)
23 3/4”(604 mm)
3 1/2” (88 mm)
2 3/4” (70 mm)
7”(177 mm)
3/4”(19 mm)
3/4”(19 mm)
3/4”(19 mm)
Flange Kit
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
148
WA
LL
WA
SH
& A
CC
EN
T
Prefix Color Temperature
LDL2 12 - 12”18 - 18”24 - 24”30 - 30”
LED 24 - 24 VDCCW - Cool WhiteNW - Neutral WhiteWW - Warm White
Light SourceLength Input Voltage
DL - Diffusing Lens
Options
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
LDL2 36 LED CW 24
36 - 36”42 - 42”48 - 48”
APPLICATIONS - Display Case Lighting, Cove Lighting, Accent Lighting, Shelf Lighting, and Under Cabinet Lighting; Interior .
PRODUCT HIGHLIGHTS
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means nodegradation in color or quality of the product under display .
• Color Consistency - Exceptional color binning +/- 5%, no visible difference from LED to LED
• Aimable - Fixture adjusts from 0o to 90o to put the light where you want it .
• “Green” Energy-Saving - Reduces gas emissions, slashes operating costs andeliminates costly lamp disposal involving mercury waste .
• Dramatically Lower Maintenance Costs - 60,000 - 100,000-hour LED source extends life 3 to 5 times as compared to conventional fluorescent .
• Easy Installation, New or Retrofit - Mounts with available brackets or customeradhesive . Lightweight (< 0 .5 lb . per foot) .
• Separate Power Supply - Fixtures are connected easily to a universal voltage powersupply (ordered separately) .
LEDS - Select high-brightness LEDs . Expected life: minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance . Available in 3500°K, 4000°K and 5100°K color temperature (nominal) .
DRIVER - State-of-the-art driver technology designed specifically for the application is integrated on-board, providing unsurpassed system efficiency . Complies with IEC and FCC standards .
ELECTRICAL - Fixtures operate on intrinsically-safe 24 VDC, which means no risk to customer or associates . Separate power supply operates on 120-277 VAC, 50/60 Hz . See accessory page .
BEAM SPREAD- 120o symmetrical distribution .
LIGHT OUTPUT - 380 lumens per foot (CW), 310 lumens per foot (NW), 300 lumens per foot (WW), with an input power of less than 5 watts per foot .
LENS- Supplied with protective clear plastic lens . Optional diffusing lens available .
HOUSING- Anodized aluminum extrusion
WIRING- Integrated connection system makes it simple to create continuous lines of LED lighting . The fixtures can be connected directly together or spaced apart as needed, using the optional jumper cables . Use appropriately sized 2-conductor to minimize voltage drop on long feeds from power .
OPERATING TEMPERATURE- -40ºC to +50ºC (-40ºF to +122ºF) .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
LISTING- Listed to U .S . and International safety standards . Suitable for dry locations .
LED LINEAR DISPLAY LIGHT (LDL2)
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
ARRAFunding Compliant
ABC
CATALOG# A B C LDL2 12 11” (279mm) 11.75” (298mm) 12.125” (308mm)LDL2 18 17” (432mm) 17.75” (451mm) 18.125” (460mm)LDL2 24 22.5” (572mm) 23.25” (591mm) 23.625” (600mm)LDL2 30 28.5” (724mm) 29.25” (743mm) 29.625” (752mm)LDL2 36 33” (838mm) 33.75” (857mm) 34.125” (867mm)LDL2 42 39” (991mm) 39.75” (1089mm) 40.125” (1019mm)LDL2 48 45” (1219mm) 45.75” (1162mm) 46.125” (1172mm)
3/4”(19mm)
13/16”(20mm)5/8”
(16mm)
Note: Power supply is required, please see LED Linear Accessories page .
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
149
WA
LL
WA
SH
& A
CC
EN
T
APPLICATIONS - Shelf Lighting, Cove Lighting, Accent Lighting, Under Cabinet Lighting and Handrail Lighting; Interior or Exterior .
PRODUCT HIGHLIGHTS
• Up-Close Illumination - Closely spaced LEDs uniformly illuminate items positionedclose to the strip, allowing shelves to be spaced closer together .
• Aimable - Fixture adjusts from 0o to +/- 90o to put the light where you want it .
• “Green” Energy-Saving - Reduces greenhouse gas emissions, and eliminates costlylamp disposal involving mercury waste .
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which meansdegradation in color or quality of the product under display is minimized .
• Dramatically Lower Maintenance Costs - 60,000+ hour LED source extends life 3 to 5times as compared to conventional fluorescent .
• Easy Installation, New or Retrofit - Mounts with available brackets or customer adhesive . Lightweight (< 0 .25 lb . per foot) .
• Separate Power Supply - Fixtures are easily connected to a universal voltage power supply (ordered separately) .
LEDS - Select high-brightness LEDs . Expected life: minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance . Available in 3500°K, 4100°K and 5500°K color temperature (nominal) .
DRIVER - State-of-the-art driver technology designed specifically for the application is integrated on-board, providing unsurpassed system efficiency . Complies with IEC and FCC standards .
ELECTRICAL - Fixtures operate on intrinsically-safe 24 VDC, which means no risk to customers or associates . Separate power supplies operate on 120-277 VAC, 50/60 Hz . See accessory page .
BEAM SPREAD - 120o symmetrical distribution .
LIGHT OUTPUT - Input power is 3 watts per foot . Cool White (CW) lumens per foot is 180 . Neutral White (NW) and Warm White (WW) lumens per foot is 150 .
LENS - Optional clear lens available .
HOUSINGS - Anodized aluminum extrusion
WIRING - Feed wires on both ends make it simple to create continuous lines of LED lighting . Fixtures can be connected either directly together or spaced up to 4’ apart with provided feed wires . Use appropriately sized 2-conductor cable (not supplied) to minimize voltage drop on long feeds for power .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
LISTING - Listed to U .S . and Canadian safety standards for wet locations .
LED LINEAR STRIP LIGHT (LSL2)
Prefix Color Temperature
LSL2 12 - 12”18 - 18”24 - 24”
30 - 30”36 - 36”48 - 48”
LED CW - Cool NW - NeutralWW - Warm White
Input Voltage
24 - 24 VDC
Options
CL - Clear Lens
Light SourceLength
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
LSL2 48 LED CW 24
This product, or selected versions of this product, meet the standards listed below. Please consult factory for
your specific requirements.
R 3/8”(10mm)
1/2”(13mm)1/8”
(3mm)
7/8”(22mm)
1-1/8”(27mm)
LSL2 12LSL2 18LSL2 24LSL2 30LSL2 36LSL2 48
ACatalog# B C
CB
A
11.125 (282mm)17.125 (434mm)23.125 (587mm)29.125 (739 mm)35.125 (892 mm)
47.125 (1196 mm)
12.188 (305 mm)18.188 (457 mm)24.188 (610 mm)30.188 (762 mm)36.188 (914 mm)
48.188 (1219 mm)
11.75 (295mm)17.75 (447 mm)23.75 (600 mm)29.75 (752 mm)35.75 (904 mm)
47.75 (1209 mm)
Suitable for wet locations
Note: Power supply is required, please see LED Linear Accessories page .
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
150
WA
LL
WA
SH
& A
CC
EN
T
APPLICATIONS - Display Case Lighting, Cove Lighting, Accent Lighting, Shelf Lighting, and Under Cabinet Lighting; Interior .
PRODUCT HIGHLIGHTS
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means nodegradation in color or quality of the product under display .
• Color Consistency - Exceptional color binning +/- 5%, no visible difference from LED to LED
• Aimable - Fixture adjusts from 0o to 90o to put the light where you want it .
• “Green” Energy-Saving - Reduces gas emissions, slashes operating costs andeliminates costly lamp disposal involving mercury waste .
• Dramatically Lower Maintenance Costs - 60,000 - 100,000-hour LED source extends life 3 to 5 times as compared to conventional fluorescent .
• Easy Installation, New or Retrofit - Mounts with available brackets or customeradhesive . Lightweight (< 0 .5 lb . per foot) .
• Separate Power Supply - Fixtures are connected easily to a universal voltage powersupply (ordered separately) .
LEDS - Select high-brightness LEDs . Expected life: minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance . Available in cool white (CW - 5100°K, CRI > 70), neutral white (NW - 4000°K, CRI > 85) and warm white (WW - 3500°K CRI > 85) . (All values nominal) .
DRIVER - State-of-the-art driver technology designed specifically for the application is integrated on-board, providing unsurpassed system efficiency . Complies with IEC and FCC standards .
ELECTRICAL - Fixtures operate on intrinsically-safe 24 VDC, which means no risk to customer or associates . Separate power supply operates on 120-277 VAC, 50/60 Hz . See accessory page .
BEAM SPREAD- 120o symmetrical distribution .
LIGHT OUTPUT - 780 lumens per foot (CW), 630 lumens per foot (NW), and 600 lumens per foot (WW), with an input power of 7 watts per foot .
LENS- Supplied with protective clear plastic lens .
HOUSING- Anodized aluminum extrusion
WIRING- Integrated connection system makes it simple to create continuous lines of LED lighting . The fixtures can be connected directly together or spaced apart as needed, using the optional jumper cables . Use appropriately sized 2-conductor to minimize voltage drop on long feeds from power .
OPERATING TEMPERATURE- -40ºC to +50ºC (-40ºF to +122ºF) .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
LISTING- Listed to U .S . and International safety standards . Suitable for dry locations .
LED LINEAR HIGH OUTPUT LIGHT (LXLC)
Prefix Color TemperatureLXLC 12 - 12”
18 - 18”24 - 24”
LED 24 - 24 VDCCW - Cool WhiteNW - Neutral WhiteWW - Warm White
Light SourceLength Input Voltage
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
LXLC 36 LED CW 24
30 - 30”36 - 36”42 - 42”
46 - 46”48 - 48”96 - 96”
AB
C
15/16”(24mm)
1-1/4”(32mm)
1-3/16”(30mm)
CATALOG# A B C LXLC 12 12” (305mm) 12.75“ (324mm) 13.125” (333mm)LXLC 18 18” (457mm) 18.75“ (476mm) 19.125” (486mm)LXLC 24 21” (533mm) 21.75“ (552mm) 22.15” (562mm)LXLC 30 27” (686mm) 27.75“ (705mm) 28.125” (714mm)LXLC 36 33” (838mm) 33.75“ (857mm) 34.125” (867mm)LXLC 42 39” (991mm) 39.75“ (1089mm) 40.125” (1019mm)LXLC 46 45” (1143mm) 45.75“ (1162mm) 46.125” (1172mm)LXLC 48 48” (1219mm) 48.75“ (1238mm) 49.125” (1247mm)LXLC 96 96” (2438mm) 96.75” (2457mm) 97.125” (2467mm)
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific
requirements.
ARRAFunding Compliant
Note: Power supply is required, please see LED Linear Accessories page .
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
151
WA
LL
WA
SH
& A
CC
EN
T
APPLICATIONS - Sign Lighting, Wall Washing, Accent Lighting; Interior .
PRODUCT HIGHLIGHTS
• Long Lasting Sparkle - LED light beam contains no heat, and no UV, which means nodegradation in color or quality of the product under display .
• Color Consistency - Exceptional color binning +/- 5%, no visible difference from LEDto LED
• Aimable - Fixture adjusts from 0o to 350o to put the light where you want it .
• “Green” Energy-Saving - Reduces gas emissions, slashes operating costs andeliminates costly lamp disposal involving mercury waste .
• Dramatically Lower Maintenance Costs - 60,000 - 100,000-hour LED source extends life 3 to 5 times as compared to conventional fluorescent .
• Easy Installation, New or Retrofit - Mounts to either ceiling or wall .
• Separate Power Supply - Fixtures are connected easily to a universal voltage powersupply (ordered separately) .
LEDS - Select high-brightness LEDs . Expected life: minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance . Available in neutral white (NW - 4000°K, CRI > 85) and warm white (WW - 3500°K CRI > 85) . (All values nominal) .
DRIVER - State-of-the-art driver technology designed specifically for the application is integrated on-board, providing unsurpassed system efficiency . Complies with IEC and FCC standards .
ELECTRICAL - Fixtures operate on intrinsically-safe 24 VDC, which means no risk to customer or associates . Separate power supply operates on 120-277 VAC, 50/60 Hz . See accessory page .
BEAM SPREAD- 120o symmetrical distribution .
LIGHT OUTPUT - 600 lumens per foot (NW) and 565 lumens per foot (WW), with an input power of 7 watts per foot .
LENS- Supplied with protective clear plastic lens .
HOUSING- Available in black, white and metallic silver .
WIRING- Intrinsically-safe 24 VDC system makes it simple to connect the fixtures to the power supply . Fixtures can be spaced apart as needed using appropriately sized 2-conductor to minimize voltage drop on long feeds from power .
OPERATING TEMPERATURE- -40ºC to +50ºC (-40ºF to +122ºF) .
WARRANTY - LSI LED fixtures carry a limited 5-year warranty .
LISTING- Listed to U .S . and International safety standards . Suitable for dry locations .
LED LINEAR HIGH OUTPUT LIGHT (LXLW)
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific
requirements.
ARRAFunding Compliant
Prefix Color Temperature
LXLW LED 24 - 24 VDCWW - Warm WhiteNW- Neutral White
Light SourceLength Input Voltage
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
LXLW 36 LED WW 24 MSV 12STC
24 - 24”36 - 36"48 - 48"60 - 60"
MSV - SilverBKS - Black
WHS - White
Finish
12STC - 12" Stem & Canopy24STC - 24" Stem & Canopy48STC - 48" Stem & Canopy
Mandatory Mounting Options
CATALOG# A B
BA
�
LXLW 24LXLW 36LXLW 48LXLW 60
26.15" (664 mm)38.15" (969 mm)50.15" (1274 mm)62.15" (1579 mm)
26.8" (681 mm)38.8" (985 mm)50.8" (1290 mm)62.8" (1595 mm)
0.405" (10 mm) OD Stem
1 1/4" (32 mm)
Note: Power supply is required, please see LED Linear Accessories page .
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
FIG. 1 - PS100 (POWER SUPPLY ONLY)
FIG. 4 - RB3 200 FIG. 5 - RB3 300/400
FIG. 2 - PSE40
FIG. 3 - PSE100
FIG. 6 - RPSE40 FIG. 7 - RPSE100
4-1/8”(105 mm)
2-13/16”(71 mm)
9-1/2”(241 mm)
1-3/16”(30 mm)
1-3/4”(44 mm)
8-5/16”(226 mm)
8-15/16”(228 mm)
11”(279 mm)
4”(102 mm)
4-1/16”(102 mm)
2-13/16”(71 mm)
2-13/16”(71 mm)
12 13/16”(326 mm)
23-5/16”(592 mm)22-5/8”
(575 mm)21-1/2”
(546 mm)
12 1/8”(308 mm)
11”(279 mm)
8-1/4”(210 mm) 8-1/4”
(210 mm)
3-13/16”(96 mm)
3-13/16”(96 mm)
3”(76 mm)
3”(76 mm)
4-1/8”(105 mm)
8-7/8”(226 mm)6”
(152 mm)
3-1/8” (80 mm)
13-7/8”(353 mm)
11”(279 mm)
13-7/8”(353 mm)
4-1/16”(102 mm)
4-1/16”(102 mm)
4-1/8”(105 mm)
3”(76 mm)
3”(76 mm)
2-13/16”(71 mm)
4-1/8”(105 mm)
6”(152 mm)
8-7/8”(226 mm)
Non-Encased 100 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC Output (Fig. 1)Encased 40 Watt Power Supply with 120 VAC; 50/60 Hz Input; 24 VDC Output. (Fig. 2)Encased 100 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 3)Encased 100 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC Output. CE listed (Fig. 3)Encased 200 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 4)2
Encased 300 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 5)3
Encased 400 Watt Power Supply with 120-277 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 5)4
Thermally Protected, Recessed Rated Encased 40 Watt Power Supply with 120 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 6)Thermally Protected, Recessed Rated Encased 100 Watt Power Supply with 120 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 7)Thermally Protected, Recessed Rated Encased 100 Watt Power Supply with 208 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 7)Thermally Protected, Recessed Rated Encased 100 Watt Power Supply with 240 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 7)Thermally Protected, Recessed Rated Encased 100 Watt Power Supply with 277 VAC; 50/60 Hz Input; 24 VDC Output. UL listed (Fig. 7)
PS 100 LED UE
PSE 40 LED 120
PSE 100 LED UE
EUR PSE 100 LED UE
RB3 200 LED UE
RB3 300 LED UE
RB3 400 LED UE
RPSE 40 LED 120
RPSE 100 LED 120
RPSE 100 LED 208
RPSE 100 LED 240
RPSE 100 LED 277
ACCESSORY ORDERING INFORMATION (Accessories are field installed and damp location listed)
Description Order Number
100 W
40 W
100 W
100 W200 W
(100x2)300 W
(100x3)400 W
(100x4)
40 W
100 W
100 W
100 W
100 W
Max Output1
3514830135148302351483043514830535148303
354875
HRNSS 6” Jumper Cable with Male/Female connectorsHRNSS 1ft Jumper Cable with Male/Female connectorsHRNSS 3ft Jumper Cable with Male/Female connectorsHRNSS 5ft Jumper Cable with Male/Female connectorsHRNSS 10 ft Jumper Cable with Male/Female connectors
Description Order Number
Description Order NumberHRNSS 10ft Jumper Cable for LXLW
FOOTNOTES:1- Damage to the power supply and unpredictable lighting can result from exceeding max
output. It is good design practice to limit loading to 80% of maximum.2- Operates (2) 100 Watt Class II power supplies3- Operates (3) 100 Watt Class II power supplies4- Operates (4) 100 Watt Class II power supplies
LXLC/LDL2 only
LXLW only
IMPORTANT POWER SUPPLY NOTE:The power supplies are designed to work with the quick connects supplied with the LDL2/LXLC series or they can be hard wired with the LSL2 and LXLW. Depending on the mounting requirements, you may need additional cable length between fixtures/power supplies. Optional length harnesses (HRNSS) shown above are designed for use with the LDL2/LXLC series to connect fixtures to the enclosed power supplies. If additional cable is needed with the LSL2 and LXLW it will be customer supplied.
LED LINEAR ACCESSORIES
ARRAFunding Compliant
LED
152
WA
LL
WA
SH
& A
CC
EN
T
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
153
WA
LL
WA
SH
& A
CC
EN
TLED LINEAR ACCESSORIES
LXLC/LDL2 - LED LINEAR DISPLAY LIGHT TYPICAL WIRINGTo connect the PSE or RB3 to the fixture, use the HRNSS 10 ft. Jumper Cable
Can be connected together 3 ways:1- Directly using supplied quick connect plugs2- HRNSS 6” jumper cable - provides up to 10” between fixtures3- HRNSS 10’ jumper cable - provides up to 124” between fixtures
POWER SUPPLY
EXAMPLE CASE CONFIGURATION
6” OR 12”HRNSS CABLE
6” OR 12”HRNSS CABLE
10’ HRNSS CABLE
LDL2 / LXL
DIRECTLYCONNECTED
NOTE: Use gel filled wire nuts when connecting fixtures outdoors.
� Power In � Power Out
LSL2 - LED LINEAR STRIP LIGHT TYPICAL WIRING
POWER SUPPLY 10' HRNSS CABLEP/N 354875
LXLW - LED LINEAR SIGN/WALL WASHER TYPICAL WIRING
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
154
WA
LL
WA
SH
& A
CC
EN
T
ARRAFunding Compliant
LED MICRO WALL WASH (MWW)PRODUCT HIGHLIGHTS
• Recessed installation hides source while providing uniform illumination of verticalsurfaces / displays
• Narrow design for design specific applications
• Accent finish options for brightness control and aesthetics
• Very high efficiency
EXPECTED LIFE - Projected life of at least 60,000 hours . Contact factory for TM-21 detail .
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and provides uniform lens luminance . Available in Cool White (5300oK), Neutral White (4100oK) and Warm White (3500oK) color temperatures . CRI >= 80 . LM-80 reports available .
HOUSING - Housing, brackets and end sections are constructed from code gauge, die formed steel . All metal parts are painted after fabrication following a treatment with a phosphate rust inhibitor .
SHIELDING/LENS: High Performance 95% reflective white reflector is standard for precision directed wall wash use . Optional accent trim and kicker reflector trim finishes available for many decorative applications .
MOUNTING: Designed for either grid or hard ceiling installations where ceiling access my be limited or completely restricted . All internal components are accessible from below the ceiling .
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz . Power factor > 0 .9, THD < 20%, in-rush current < 15 Amps .
DRIVER - High-performance isolated driver features over-voltage, over-current and short-circuit (with auto-recovery) protection . Driver module is sealed to IP66 protection levels, with a Class A sound rating . 0-10 volt dimming standard .
FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Finish coating of housing reflecting surfaces is with high-reflectance (minimum 92%) polyester powder .
WARRANTY - Limited 5-year warranty .
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data .
LISTING - Listed to UL1598 and other U .S . and Canadian safety standards .
3-1/2”(89 mm)
5-3/4’(146 mm)
5/8”(15 mm)
ACCENT TRIMKICK
REFLECTORDIFFUSER
MWW - LED Wall Wash
2 - 2’4 - 4’
LED CW - Cool WhiteWW - Warm WhiteNW - Neutral White
HO - High OutputSS - Super Saver
BLK - BlackWHT - White
UE - Universal Electronic
(120-277V)
ColorTemperature
Accent TrimFinish
Kick Reflector Finish
Line Voltage
EM - Emergency Battery Pack 1
CPL - CCEA Chicago Approved
OptionsLength LightSource
BLK - BlackSLVR - SilverWHT - White
LumenOutput
Prefix
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
MWW 4 LED HO NW WHT BLK UE CPL
1- EM ballast available only with a remote test switch
ACCESSORY ORDERING INFORMATIONDescription Order Number Description Order Number
(Accessories are field installed)
Flange Kit - 4 FootFlange Kit - 2 Foot FKMWW2 FKMWW4
LIGHT OUTPUT - MWW LED
WW
1970 2110
Description2’4’
SS - Super Saver HO - High Output NW
2370
CW WW
3000 3200
NW
3690
CW SS
28 45
HO
Preliminary Data
Wattsdry location
This product, or selected versions of this product, meet the standards listed below.
Please consult factory for your specific requirements.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
155
WA
LL
WA
SH
& A
CC
EN
T
DIMENSIONS
PRODUCT HIGHLIGHTS
• Powerful accent lighting product provides the flexibility of track lighting and the powerof a pair of adjustable LED lighting fixtures
• Adjustability of the lampholders plus the availability of a wide range of distributionsprovide the ability to create just the right accent lighting
LAMPS - Dimmable LED reflector lamps with high brightness LEDs . Two sizes: PAR30 and PAR38 . Available in a wide range of outputs and distributions (spot or flood) . Contact factory for details .
HOUSING COMPONENTS - Pre-painted die-formed 22 gauge CRS
DOOR - Die-formed cold rolled steel, polyester powder coated finish
ADJUSTABLE LAMPHOLDERS - Gimbal ring constructed of 16 gauge CRS, white polyester powder coated finish . Rotation 0° - 358° , vertical 0° - 90° . Two locking knobs included .
YOKE - Cold rolled steel, polyester powder coated finish
SOCKET - Medium base, pulse rated for 4kv
MOUNTING - Supplied with T-bar clips
FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Finish coating of housing reflecting surfaces is with high-reflectance (minimum 92%) polyester powder .
WARRANTY - Limited 5-year warranty
PHOTOMETRICS- Consult factory .
LISTING - UL listed to U .S . and Canadian safety standards . Suitable for damp location
LED DUETTO® (DUT 201)
G - Grid 20 30LED - PAR 3038LED - PAR 38LL - Less Lamp
(blank) - Less LampNW - Neutral White
(blank) - Less LampSP - Spot (15o)FL - Flood (40o)
Prefix VoltageColor Temperature DistributionMounting Wattage Light Source
DUT 201 120 - 120 VAC
TYPICAL ORDER EXAMPLE: DUT 201 G 20W 38LED NW SP 120
Contact factory for other currently available color temperatures, distributions and wattages
ORDERING INFORMATION
24” (610mm)
24” (610mm)
8”(205mm)
2-1/2”(65mm)
2-1/2”(65mm)
9-3/4”(248mm)
9-1/2”(239mm)
ARRAFunding Compliant
dry location
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
156
WA
LL
WA
SH
& A
CC
EN
T
LED TRACK-IN-THE-BOX (111)APPLICATION - Track in the Box is a recessed multiple adjustable accent light with con-
tinuous track for lateral adjustment .
LAMPS - Dimmable LED reflector lamps with high brightness LEDs . Two sizes: PAR30 and PAR38 . Available in a wide range of outputs and distributions (spot or flood) . Contact factory for details .
HOUSING - Die formed cold rolled steel, white or black polyester powder coated finish .
TRACK - Extruded aluminum, single circuit with continuous copper conductors . Finish to be white or black .
TRACK ADAPTER - Single circuit, injection molded plastic
INSULATION DETECTOR - A self resetting insulation detector is provided as standard .
YOKE - Die formed CRS, with 360° rotation and 55° angular adjustment .
SOCKET - Medium base .
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data .
LISTING - UL listed to U .S . and Canadian safety standards . IBEW Union made in the U .S .A . B
A
1x1
1x2
1x4
11-3/4” x 11-3/4”(298mm) x (298mm)
11-3/4” x 23-3/4”(298mm) x (603mm)
11-3/4” x 47-3/4”(298mm) x (1215mm)
9-1/2”(241mm)
Fixture W x L (A) Height (B) Par 38 Par 30Gimbal Ring Dia.
5" 4"
111 G - Grid 1 - 1 Foot2 - 2 Foot
4 - 4 Foot
38LED - PAR3820W - 20 wattLL - Less Lamp
123456
120 - 120 Vac
Wattage Source # of Lamps Input Voltage
F -FusingBK - Black Housing
OptionsMounting LengthPrefix
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
111 G 2 20W NW FL 38LED 3 120 BK
ACCESSORY ORDERING INFORMATIONDescription Order Number Description Order Number
(Accessories are field installed)
Flange Kit - 1 x 4Flange Kit - 1 x 1Flange Kit - 2 x 2
FK11FK12
FK14
(blank) - Less LampCW - Cool WhiteNW - Neutral WhiteWW - Warm White
(blank) - Less LampSP - Spot (15o)FL - Flood (40o)
Color Temperature Distribution
Contact factory for other currently available color temperatures, distributions and wattages
DIMENSIONS
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
157
WA
LL
WA
SH
& A
CC
EN
TLED WALL / CEILING MOUNT - W44
PRODUCT HIGHLIGHTS
• Designed for either wall, ceiling or pendant mounting .
• Versatile linear choice . The cross-section dimensions allow this efficient luminaire tofit into most architectural spaces conveniently and unobtrusively .
• The entire series is a singular cross-section, allowing for long row composition
• Acrylic diffuser incorporates a well-defined linear prism design .
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and provides uniform lens luminance . Available in Cool White (5300°K), Neutral White (4100°K) and Warm White (3500°K) color temperatures . CRI >= 80 . LM-80 reports available .
CONSTRUCTION - The housing and end plates are die-formed 20 gauge cold-rolled steel .
LENS - One-piece frosted extruded wrap around acrylic prismatic lens standard .
ELECTRICAL - Universal voltage (120-277 Vac) input, 50/60 Hz . Power factor > 0 .9, THD < 20%, in-rush current < 15 Amps .
DRIVER – High-performance isolated driver features over-voltage, over-current and short-circuit (with auto-recovery) protection . Driver module is sealed to IP66 protection levels, with a Class A sound rating .
FINISH - All reflective surfaces are finished with a high reflectance, lighting fixture white polyester powder .
WARRANTY - Limited 5-year warranty .
LISTING - UL Listed to U .S . and Canadian safety standards . Suitable for damp locations . IBEW Union made in the U .S .A
W442 - 2-foot
W444 - 4-foot
W448 - 8-foot
LED SS -Super SaverHO - High Output
Prefix OptionsColor TemperatureDrive Current
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
DIM - 0-10V DimmingEM - Emergency PackPM - Prewired Plug-in (See options page)
LightSource Voltage
UE - Universal Electronic
(120-277V)347 - 347V
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
W444 LED SS CW UE EM
ACCESSORY ORDERING INFORMATIONDescription
(Accessories are field installed)Order Number
Joiner BandPendant Mount Kit (3/8” IP Stems)
JBW44PMK
W44-2’ 4-11/16” (119mm) 4-3/8” (109mm) 24-3/16” (614mm)W44-4’ 4-11/16” (119mm) 4-3/8” (109mm) 48-3/16” (1223mm)W44-8’ 4-11/16” (119mm) 4-3/8” (109mm) 96-3/16” (2442mm)
Fixture (A) (B) LENGTH
BCEILING MOUNT
Lumens Watts LPWw442 w444
SS
HO
LIGHT OUTPUT - LED W44
Neut
ral W
hite 2780
-
29-
96-
Lumens Watts LPW
3250
4540
3543
93106
ARRAFunding Compliant damp location
DIMENSIONS
This product, or selected versions of this product, meet the standards listed below.Please consult factory for your specific requirements.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
158
CO
OL
ER
/B
EE
R C
AV
E &
UT
ILIT
Y
SMARTTEC™ ENERGY SAVING FEATURES:THERMAL CONTROL - Sensors in both the optical unit and driver enclosure reduce drive
current when ambient temperatures exceed 50°C . Current is lowered in imperceptible 5% increments every 5 minutes until recommended operating temperature is reached .
OCCUPANCY SENSING (IMS) - Optional internal passive infrared motion sensor activated switching of luminaire light levels . High level light is activated when automobile or passerby enters sensor target zone . High light level is increased to full bright in 1-2 seconds upon detection . Low light level (30% of maximum drive current) is activated when target zone is absent of motion activity for ~ 2 minutes . Upon inactivity, light level is gradually ramped down (10-15 sec .) to low level to allow eyes time to adjust . Two sensor detection optics are available . The wide optic has a coverage range of 40 feet diameter at mounting heights of 8 feet to 12 feet . The narrow optic has a coverage range of 20 feet diameter at a mounting height of 8 feet to 12 feet .
DIMMING (DIM) - 0-10 volt dimming enabled, with controls by others .BI-LEVEL SWITCHING (BLS) - Bi-level switching responds to external line voltage signal
from separate controller or sensor (by others), with low light level decreased to 30% maximum drive current .
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient temperature of the installation location . See LSI web site for specific guidance .
LEDS - Two LED array choices; 50 and 68 . Each feature high-brightness LEDs in Cool White (5300°K) or Neutral White (4100°K) color temperature, 70 CRI (nominal) .
DRIVER CURRENT OPTIONS - Available in 350mA, 450mA or 550mA drive currents . DISTRIBUTION/PERFORMANCE - Ultra-high efficiency reflectors provide solid performance
for typical spacings and heights, exceptional uniformity with vertical illumination and full cutoff . Ideal when maximum spacing is desired without sacrificing desired lumen levels . Meets RP20 recommendations while delivering unique control of distribution to minimize glare . Optional diffused lens available to reduce visibility of diodes .
HOUSING/OPTICAL UNIT - The XPG3 features a slim 7-1/8” profile . Housing is die-formed aluminum with a gasketed clear flat tempered glass lens providing a water-resistant seal . Weather-tight aluminum enclosure contains factory prewired driver to ensure no water entry and to eliminate need to open fixture completely . Optical unit is IP67 rated .
MOUNTING - Not intended for recessed mounting in enclosed ceilings . Standard mounting is rigid 3/4” pendant mount or direct surface mount to 4” (102mm) octagon box (box by others) . Pendant and direct mount standard with 48” leads and 8” leads respectively . Direct mount features standard quick mount plate with elongated key hole slots to allow alignment of fixtures .
ELECTRICAL - Universal voltage power supply (120-277 VAC, 50/60 Hz) . Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62 .41 .2-2002, Scenario 1, Location Category C . Emergency LED battery back-up/driver operates 10 LEDs for a minimum of 90 minutes when primary AC power failure occurs .
DRIVER - Proprietary, state-of-the-art SmartTec driver technology designed specifically for LSI LED light sources provides unsurpassed system efficiency . Driver will operate with input of 120V thru 277V (50/60 Hz) . LSI components are fully encased in potting material for IP65 moisture resistance . Driver complies with IEC and FCC standards .
OPERATING TEMPERATURE - -40ºC to +50ºC (-40ºF to +122ºF) .FINISH - Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing
process . DuraGrip withstands extreme weather changes without cracking or peeling . Guaranteed for five full years . Standard colors are white, black and metallic silver .
WARRANTY - Limited 5-year warranty .PHOTOMETRICS - Application layouts are available upon request . Contact LSI Applications
Group at lighting .apps@lsi-industries .com .SHIPPING WEIGHT - Standard fixture 21 lbs . (9 .5 kg) . Fixtures with battery back-up 28
lbs . (13 kg)LISTING - ETL listed to U .S . and International safety standards . Suitable for wet locations .
LED GEN3 PARKING GARAGE LIGHT (XPG3)US patent D603081 & D611188 & 7828456 and US & Int’l. patents pending
Not all versions of this product are CE certified.
This product, or selected versions of this product, meet the standards listed below. Please consult
factory for your specific requirements.
Type 5 Type S
Cool
Whi
teNe
utra
l Whi
te
LIGHT OUTPUT - XPG3Lumens (Nominal)
# of LEDS Watts471858145743708266568397424556955137691959507875
506850685068506850685068
6187751276069580895210712599870517313858484569880
56757398901255675739890125
350 mA
450 mA
550 mA
350 mA
450 mA
550 mA
ARRAFunding Compliant
Suitable for wet locations
enabled
enabled
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
LED
159
CO
OL
ER
/B
EE
R C
AV
E &
UT
ILIT
YLED GEN3 PARKING GARAGE LIGHT (XPG3)
Prefix FinishColorTemperature
XPG3DDirect Mount
XPG3PPendant Mount
LED 5068
CW - Cool White(5300º K nom.)
NW - Neutral White(4100º K nom.)
Input Voltage
UE - Universal Electronic (120-277)
347 - 347 volt
480 - 480 volt
WHT - WhiteBLK - BlackMSV - Metallic Silver
Sensor/OptionsOptional ControlsLightSource
Distribution # ofLEDs
TYPICAL ORDER EXAMPLE:
LUMINAIRE ORDERING INFORMATION
XPG3P 5 LED 68 450 CW UE WHT
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
BGXPG PCS5
C/F6
C/F6
Bird GuardPolycarb SheildROSB120 - WL Remote Box with 120V Occupancy SensorROSB277 - WL Remote Box with 277V Occupancy Sensor
Description Order Number Order Number
FOOTNOTES:1 - IMS, DIM and BLS are not compatible.2 - Do not specify for satellite units. 3 - Not compatible with Virtinet wireless systems,
DIM or BLS
350 - 350mA450 - 450mA550 - 550mA
DriveCurrent
SensorES2 - External SensorIMSW - Integral Motion Sensor
Wide3
OptionsBB - Battery BackupCWBB - Cold Weather BBDFL - Diffused Lens4
C/F6
C/F6
RPSB120 - WL Remote Box with 120V External PhotocellRPSB208-277 - WL Remote Box with 208-277V External Photocell
Description
5 - Type 5S - Symmetric
Virtinet Wireless Network(requires a Ventura controller/Malibu link)(blank) - NoneVCM - Standard (revenue grade)VCMB - BasicVCMH - Standard (Host)VCMBH - Basic (Host)DIM - 0-10 volt dimming(required for satellite fixtures)
Stand-Alone Control(blank) - NoneDIM - 0-10V Dimming (from external signal)1
BLS - Bi-level Switching (from external signal)1
4 - Diffused lens reduces light output. Consult factory.5 - Polycarb sheild not available with IMS.6 - Includes VCM. To be used in conjunction with VCM options in fixture. Consult factory.
BOTTOM VIEW
POLYCARB SHIELD
SIDE VIEW SIDE VIEW
DIMENSIONS
7-1/8”(183mm)8”
(203mm)
5/8”(16mm)
16-1/2”(419mm)
16-1/2”(419mm)
2-1/2”(63mm)
4-1/8”(105mm)
7-1/8”(183mm)8”
(203mm)
5/8”(16mm)
2-1/2”(63mm)
Optional IMS
1-3/16”(30mm)
7”(178mm)
13-3/8”(339mm)
13-3/8”(339mm)
16-3/8”(416mm)
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
160
CO
OL
ER
/B
EE
R C
AV
E &
UT
ILIT
Y
Light Source Lumen Output OptionsLine VoltageDistributionLengthPrefix
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
EG3 4 S LED HO CW UE
EG3 - LEDEnclosed& Gasketed
S - Symmetric4 - 4 foot8 - 8 foot
HO - High OutputLED
Color Temp
CW - Cool WhiteNW - Neutral WhiteWW - Warm White
TP - Tamper resistant latches and screwsSL - Stainless Steel latches6CNP - 6' foot white cord, no plugEM - 1100 Lm Emergency
UE- Universal Voltage(120-277V)
(2) snap-on bails & (2) 10’ aircraft cables(2) snap-on bails & (2) 3’ jack chains(2) snap-on bails & (2) 5’ jack chainsStainless Steel 45o mounting bracket
EG34ACEGCHSEGCHS5EG45MB
ACCESSORY ORDERING INFORMATIONDescription Order Number
LED ENCLOSED & GASKETED - ANGLED LENS (EG3)PRODUCT HIGHLIGHTS
• Vaportight design
• High-impact resistant, reinforced fiberglass housing .
• Lens secured to housing with (8) polycarbonate latches . Optional stainless steellatches are securely spring clipped to the housing, eliminating latch fall off duringservicing .
• Gasket is a continuously poured non-toxic, fire resistant, uniform width and thicknessfor a tight seal .
• National Sanitation Foundation and Canadian Standards Association approved and listed .
EXPECTED LIFE - Projected life of at least 60,000 hours . Contact factory for TM-21 detail .
LEDs - Use of closely-spaced medium-power, high-brightness chips minimizes pixelation and provides uniform lens luminance . Available in Cool White (5300oK), Neutral White (4100oK) and Warm White (3500oK) color temperatures . CRI >= 80 . LM-80 reports available .
DISTRIBUTION- Proprietary lens provides high lumen output with soft, reduced brightness . Overlay is removable to produce even higher lumens .
CONSTRUCTION - Inner tray of .06” thick aluminum . Outer housing molded of high-impact, polyester/UL5VA fiberglass with inner lip bonded with continuous, compressible, closed-cell neoprene gasketing .
LENS - Injection molded high impact lens acrylic with lineal ribbing as standard .
MOUNTING - (2) stainless steel mounting brackets are furnished with each fixture, and can be mounted to surface where required . Housing snaps into bracket easing installation . Brackets accept V-hooks or snap-on steel bail for cable suspension .
ELECTRICAL- Universal voltage (120-277 Vac) input, 50/60 Hz . Power factor > 0 .9, THD < 20%, in-rush current < 15 Amps .
DRIVER - High-performance isolated driver features over-voltage, over-current and short-circuit (with auto-recovery) protection . Driver module is sealed to IP66 protection levels, with a Class A sound rating . 0-10 volt dimming standard .
FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor . Finish coating of housing reflecting surfaces is with high-reflectance (minimum 92%) polyester powder .
WARRANTY - Limited 5-year warranty .
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data .
LIGHT OUTPUT - 6050 lumens @ 57 watts (4 foot); 12,000 lumens @116 watts (8 foot)
LISTING - Listed to UL1598 and other U .S . and Canadian safety standards .
ARRAFunding Compliant
4 1/4"(108mm)
6 13/16" (170mm) Shown withEG345MBAccessory
MOUNTING
OPTIONALTAMPERPROOF
SCREWS
ADJUSTABLE MTG. BRACKET
STAINLESS STEEL LATCHES OPTIONAL
51 5/8"
(2) 1/4" X 5/8" SLOTS
wet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
161
DO
WN
LIG
HT
ING
PRODUCT HIGHLIGHTS
• Powered by Philips Fortimo™ LED module with patented remote phosphor technology enablinghighest efficacy .
• Active thermal management (2000 and 2800 lumen only) with quiet and reliable operation . (Noise rating below 28dBA .)
• Meets RP-1 requirements with a controlled light distribution at a 55° cut off .
LEDs - Select high-brightness LEDs illuminate remote phosphor disk . Available in neutral (NW - 4000°K) and warm white (WW - 3000°K) CRI = 80 (nominal)
REFLECTOR - Specification grade aluminum (1 .2mm thick) spun reflector available in clear or soft haze finish . Self-flange white trim is standard .
ROUGH-IN FRAME - Heavy-duty galvanized steel frame with a large access junction box, ETL-listed for through wiring . Light engine and driver are accessible from above or below ceiling .
DIMMING - 0-10 volt dimming (down to 10%) is standard .
MOUNTING - Fixture is Non-IC, insulation must be kept minimum 3” away . Universal mounting brackets are compatible with C-channel, flat bar, wood joist bar hanger and EMT . Note - Bar hangers must be selected as options . C-channel is recommended for T-bar ceilings .
ELECTRICAL - Universal input, 120-277 VAC, 50/60 Hz (1100 to 2000 lumens only) . 2800 lumen unit must specify 120 or 277 voltage .
EMERGENCY BACKUP - Supply voltage must be selected . Emergency driver supplies up to 7 watts at max rated current (270 mA) for a minimum of 90 minutes . Remote test switch included .
WARRANTY - Limited 5-year warranty . 60,000-hour minimum expected life .
LISTING - Damp location . ETL listed to U .S . and Canadian safety standards .
PHOTOMETRICS - LM-79 and LM-80 reports, as well as application layout assistance are available on request . Contact LSI Applications Group or lighting .apps@lsi-industries .com .
LED 6” ARCHITECTURAL DOWNLIGHT - FRAME AND REFLECTOR (ADL6)
Suitable for wet locations
ARRAFunding Compliant
11 - 1100 13 - 1300 20 - 2000 28 - 2800
Prefix Reflector FInishColor Temp Line VoltageLight Source Module Lumens
ADL6- 6" Downlight(Frame & Reflector)
LED NW - Neutral WhiteWW - Warm White
UE1- Univ. Input(120 - 277 VAC)1202 - 120 VAC2772 - 277 VAC
C - ClearHZ - Haze
Options
EM - Emergency (120v)EM27 - Emergency (277v)I100 - C-Channel Bar HangerI200 - Flat Bar HangerI400 - Wood Joist Bar Hanger
TYPICAL ORDER EXAMPLE: ADL6 LED 13 WW UE C I100
ORDERING INFORMATION
1- 1100, 1300 or 2000 lumen units only2- 2800 lumen units only
LIGHT OUTPUT - ADL6Module Lumens Watts1100 930 191300 1350 292000 1725 342800 2185 48
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
162
DO
WN
LIG
HT
ING LED 6 INCH DOWNLIGHT (PDL6K)
HO - High Output
Prefix Color Temp Line VoltageLight Source Lumen Output
PDL6K - 6" Downlight(Module & housing)
LED NW - Neutral White (4000K)WW - Warm White (3000K)
120 - 120 VAC
Reflector FInish
SD - Semi-diffused
TYPICAL ORDER EXAMPLE: PDL6K LED HO NW 120
ORDERING INFORMATION
LEDs - Select high-brightness LEDs . Color temperature 4000K (NW, nominal) or 3000K (WW) . CRI = 90 (nominal)
REFLECTOR - High quality aluminum spun reflector has semi-diffuse finish . Self flange white trim is standard .
HOUSING - Housing is made from cast and machined aluminum (6061-T6 alloy) .Mounting bracket formed #304 stainless steel . Hardware is stainless steel .
DIMENSIONS
7-1/2”
6-3/8”
7-1/4”
11”
5-11/16”Module Only
Assembled in Housing
7-5/16” 3-1/2”
3-1/2”
Suitable for wet locations
ARRAFunding Compliant
DIMMING - Works with standard leading- and trailing-edge technologies down to 5% and 10% respectively . Contact factory for compatibility with Lutron, Leviton other manufacturers products .
MOUNTING - Torsion springs safely secure LED trim and module in housing
INPUT POWER - 14 watts at 120 VAC
DELIVERED LUMENS - 831
EXPECTED LIFE - Minimum 50,000 hours .
WARRANTY - Limited 5-year warranty .
LISTING - Wet location . ETL listed to U .S . and Canadian safety standards .
PHOTOMETRICS - LM-79 and LM-80 reports, as well as application layout assistance are available on request . Contact LSI Applications Group or lighting .apps@lsi-industries .com .
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
163
LIF
E S
AF
ET
YTHERMOPLASTIC LED COMBO EXIT/EMERGENCY (LEPC)HOUSING
• Contractor Oriented Snap TogetherDesign
• Universal Chevron Selection
• Damp Location Rated
• High Impact Thermoplastic
• UL 94-5VA flame rating•
ILLUMINATION
• L .E .D . source - available in Long Life,High Output Red or Green
• Low Energy consumption (2 .8 Watts)
• Fully Illuminated 6 Inch Letter with ¾”Stroke
• 3 .5 watt LED Lightbar with AdjustableLamps
ELECTRONICS
• 120/277 60Hz Dual Voltage
• Self Test and Diagnostics OptionAvailable
• Low voltage Disconnect Protection
• Solid State Charger
• Automatic Brown out protection
• Momentary Test switch with LEDCharge Indicator
• Overload and Short-circuit Protection
BATTERY
• NiCad Battery Standard
• 15 Yr . Life Expectancy within 0o-40oCOperating Temps
MOUNTING
• Universal Mount with Canopy
• CODE CONFORMANCE & STANDARDS
• UL 924
• N .E .C .
• N .F .P .A . Life Safety Code 101
• UL 90 Minute Run Time, 24Hr RechargeTime
damp location
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
U - Universal (Includes 2 Face Plates, Back Plate, And Mounting Canopy)
R - Red
G - Green
LEPC W - White
BK - Black
SD2-Self test / self diagnostics VL - Vandal Lens (backmount)WVL - Wet Location Vandal Lens (backmount)
LEPC R U W SD2
Prefix Letter Color Number of Faces Housing Options Accessories
Wire guard available . Order separately . See wire guard chart in Accessories section .
9.5”
13.8”1.8”
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
164
LIF
E S
AF
ET
Y
BATTERY
• 6 volt NiCad Battery Standard
• 15 Yr . Life Expectancy within 0o-40oCOperating Temps
• Optional Remote Capacity Available - Upto 2 PRLED Remote Heads
• 90 minute UL Listed EmergencyRuntime, 24Hr Recharge Time
ELECTRONICS
• 120/277 Dual Voltage, 60Hz
• Low voltage Disconnect Protection
• Solid State Charger
• Automatic Brown out protection
• Momentary Test Switch with LEDIndicator
• Overcharge Protection
MOUNTING
• Universal J-Box Mount with Canopy(ceiling, wall or end mount)
CODE CONFORMANCE & STANDARDS
• UL 924
• N .E .C
• N .F .P .A . Life Safety Code 101
• Damp Location Rated
Wire guard available . Order separately . See wire guard chart in Accessories section .
THERMOPLASTIC LED COMBO EXIT / EMERGENCY (LPRX)
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
U - UniversalIncludes 2 Face Plates, Back Plate, and Mounting Canopy
R - RedG - Green
LPRX - Combo WH - WhiteBK - Black
1 - For use with single or double PRLED remote lamps only
LD11 - 1.1 Watt LED Heads
R - 2.2 Watts Remote Capacity1
SD2-Self test / self diagnostics
VL - Vandal Lens (backmount)
LPRX R U WH LD11 R
Prefix Letter Color # of Faces Housing Lamp Heads Options
Accessories
HOUSING
• Contractor Oriented Snap TogetherDesign
• Universal Chevron and Face Selection
• Field-selectable Top or Side mounting ofEmergency Lamps
• High Impact Thermoplastic (UL94-5VA)
ILLUMINATION
• L .E .D . source - available in long life,high output red or green
• Low Energy consumption
• Fully Illuminated 6 Inch Letter with ¾”Stroke
• Two 6 volt 1 .1 Watt LED Heads
damp location
18'
1fc Average
3'
Using multiple units mounted at a typical 7.5’ delivers 18’ center-to-center
spacing on a 3’ wide egress path.
14'
1fc Average
6'
Using multiple units mounted at a typical 7.5’ delivers 14’ center-to-center spacing on a 6’ wide egress path.
SPACING GUIDES
Project Name
Catalog #
THIS PAGE LEFT INTENTIONALLY BLANK
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
166
LIF
E S
AF
ET
Y
HOUSING
• Impact Resistant ThermoplasticHousing (UL94-5VA)
• Universal J-box Mounting
• Completely Self Contained
• Stylish Low Profile ContemporaryDesign
• Damp Location Rated
ILLUMINATION
• Fully Adjustable 1 watt LED Heads
BATTERY
• NiCad Battery Standard
• 15 Yr . Life Expectancy within 0o-40oCOperating Temps
• 2 .2 Watts of Remote Battery Power isOptional
ELECTRONICS
• Low voltage Disconnect
• AC Lockout
• Brown-out Protection
• 120-277 Volt Rated, 60Hz
• SD2 Self Test/Self Diagnostics OptionAvailable
CODE CONFORMANCE & STANDARDS
• UL 924 N .E .C, N .F .P .A . 101
• ETL Listed 90 min . Run Time / 24 HrRecharge Time
THERMOPLASTIC LED EMERGENCY UNIT (LTEM)
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
LTEM WH SD2
Prefix Housing Options
LTEM - (2) 1 Watt LED Heads WH-White SD2-Self Test / Self DiagnosticsBK-Black R - 2.2 Watts Remote Capacity1
1 - For use with single or double TMLED remote lamps only
Wire guard available . Order separately . See wire guard chart in Accessories section .
3-1/4”(83mm)
2”(51mm)
4-1/4”(108mm)
10-1/5”(267mm)
8”(203mm)
3-1/2”(89mm)
damp location
SPACING GUIDES
18'
1fc Average
3'
Using multiple units mounted at a typical 7.5’ delivers 18’ center-to-center
spacing on a 3’ wide egress path.
14'
1fc Average
6'
Using multiple units mounted at a typical 7.5’ delivers 14’ center-to-center spacing on a 6’ wide egress path.
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
167
LIF
E S
AF
ET
YLED WET LOCATION EM UNIT (LSWL)
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
BK - BlackGY - Gray
VL - Vandal Guard (back mount)LSWL
LSWL GY
Prefix Finish Accessories
HOUSING
• Impact Resistant 94-5VA polycarbonate
• Gasketed and Sealed Hinged Cover
• Cold Weather (-20oC) Standard
• Gray Finish Standard
ILLUMINATION
• Fully Adjustable 1 .9watt LED NemaRated Lamp Heads
BATTERY
• Maintenance Free 6 Volt NiCad BatteryStandard
• Remote Capable up to 3 .7 Watt intemperatures ranging from 0o-50oC -Powers up to (3) PRLED Remote Heads
• 90 Minute Run Time, 24Hr RechargeTime
ELECTRONICS
• Charge Rate/Power On LED IndicatorLight with Test Button
• Overload and Short-circuit Protection
• Low voltage Disconnect
• Brown-out Protection
• 120-277 Volt Rated, 60Hz Input
CODE CONFORMANCE & STANDARDS
• UL 924 N .E .C, N .F .P .A . 101
• IP65 Rated35/8”
8”
65/10”
57/8”
123/16”
Wire guard available . Order separately . See wire guard chart in Accessories section .
wet location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
09/13/13
LED
168
LIF
E S
AF
ET
YREMOTE HEADS
PRLED - REMOTE LAMPS FOR LPRX LED COMBO UNIT
FEATURES
• Available for use with LPRX combo unit only
• Each lamp head contains 12 long lasting, efficient, ultra-bright white LEDs
• Rugged, injection-molded UL94 V-0 flame retardant, high-temperature thermoplastichousing
• Low cost - easy installation
• Single and double head configurations available
• Optional Self Test/Self Diagnostics (SD2) available
• Suitable for damp location
• Optional wet location rating (WL) available
TMLED - REMOTE LAMPS FOR LTEM EMERGENCY LIGHTING UNIT
FEATURES
• Available for use with LTEM emergency unit only
• Each lamp head contains 12 long lasting, efficient, ultra-bright white LEDs
• Rugged, injection-molded UL94 V-0 flame retardant, high-temperature thermoplastichousing
• Low cost - easy installation
• Single and double head configurations available
• Optional Self Test/Self Diagnostics (SD2) available
• Suitable for damp location
• Optional wet location rating (WL) available
CONFORMANCE TO CODES & STANDARDS
U .L . listed and meets or exceeds the following: U .L . 924, N .E .C . requirements and N .F .P .A . 101 .
Double Lamp withNo Options
Single Lamp withWeatherproof (WP) Option
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
PRLED SD2
Prefix Options
PRLED - Single Remote Lamp2PRLED - Double Remote Lamp
SD2-Self Test / Self Diagnostics1
WL- Wet Location
1 - Remote Lamps with SD2 option are compatible with LED units with SD2 option only
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
TMLED SD2
Prefix Options
TMLED - Single Remote Lamp2TMLED - Double Remote Lamp
SD2-Self Test / Self Diagnostics1
Wl- Wet Location
1 - Remote Lamps with SD2 option are compatible with LED units with SD2 option only
damp location
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
Project Name
Catalog #
09/13/13
© 2013 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
LED
169
LIF
E S
AF
ET
YUNIVERSAL LED REMOTE HEAD
The LUVR LED Remote Lamp is the first remote head of its kind to offer outstanding light output that is also compatible with ANY 6 volt or 12 volt battery system . The options are endless for applications, including mounting to existing back up units for LED retrofit opportunities .
FEATURES
• Designed to operate from any 6V or 12V power source, no need to specify
• Each fully-adjustable, high-intensity lamp head contains 3 LEDs with individual,engineered refractors for maximum distribution - Total wattage 3 .6W per head .
• Uniform lighting pattern provides optimal illumination over required path of egress,typical two lamp fixture provides 60 foot center-to-center spacing
• Rugged, injection-molded, high-temperature thermoplastic housing
• Available as remote or alternate head for traditional battery units
• Standard finish: White
CONSTRUCTIONThe LUVR LED housing is constructed of rugged, injection-molded, high-temperature thermoplastic housing in white .
ILLUMINATIONHigh-intensity lamp head contains 3 LEDs with individual, engineered refractors for maximum distribution .
ELECTRONICSCompatible with any 6 volt or 12 volt battery system (sold separately), that provides a minimum of 3 .6 watts per lamp . Utilizes 3 bright white LEDs with a total output of 120 lumens .
CONFORMANCE TO CODES & STANDARDSThe LUVR Series meets or exceeds the following: UL924, NEC requirements and NFPA 101 .
TYPICAL ORDER EXAMPLE:
ORDERING INFORMATION
LUVR WH
Prefix Watts Finish
LUVR1 2 - 3.6 Watts WH - White Housing w/White FaceBK - Black Housing w/White Black
1 - Mounting Plate not included
damp location
60'
1fc Average
6'
Two (2) LUVR LED lamps installed on a typical battery pack/charging unit. Using multiple units mounted at a typical 8.5’ delivers 60’ center-to-center spacing on a 6’ wide egress path.
SPACING GUIDES
LED
170
TERMS - Net 30 days after the date of Invoice. Invoices that are past due are subject to a 1 ½ percent per month service charge.
PRICES - Prices are subject to change without notice. All orders are subject to a minimum of $150. The order minimum may be adjusted at time of order entry commensurate with the products and parts ordered and to accommodate order handling costs. Parts only orders are subject to a $50 minimum charge.
COST OF COLLECTION - If Buyer defaults with respect to any payment due the Seller, the Buyer shall pay Seller for all costs and expenses, including legal expenses and attorney fees, incurred by Seller in exercising any of its rights or remedies.
TRANSPORTATION AND DELIVERY – Prices are F.O.B. shipping point, shipping and handling allowed on orders with a selling price of $2,000 or more, per order, per destination in the continental United States. Orders that fail to qualify for the allowance will be charged Seller’s actual shipping and handling costs. Shipments to Alaska and Hawaii will deviate from Seller’s standard terms and condition and Buyer will be charged Seller’s actual shipping and handling costs, regardless of order size. On all shipments, LSI freight policy is the best way, less than truckload commercial carrier.
SCHEDULED SHIP DATE- The scheduled ship date is an estimate only. Seller is not responsible for missed ship dates and late deliveries caused by the carrier. Seller will not accept any back charges for late deliveries.
CHOICE OF CARRIER- LSI reserves the right to ship goods via the most economical routing and to consolidate shipments to the most economical groupings per schedule date. If alternative shipping means are requested by the buyer, the buyer assumes the additional transportation cost.
SPECIAL SHIPPING REQUEST- Special shipping requests will be accommodated when possible. Buyer’s request for a particular carrier and/or special shipping will require the Buyer to pay the difference in the rate of transportation and may incur additional handling charges. Buyer may be charged extra for optional packaging, for the costs for advance notification by carrier, residential delivery, and for special equipment needs such as lift gates, flat beds or for inside delivery. City delivery or special services requested such as redelivery, expedited surface delivery or delayed delivery charges will be charged to the Buyer at Seller’s actual cost.
C.O.D. Orders- Seller will not ship orders C.O.D. If Buyer does not have an active credit account with Seller, Buyer must pay cash in advance atorder entry.
DAMAGE- Title to any goods sold and the risk of loss of such goods passes to Buyer upon delivery by Seller or Seller’s vendors to the carrier, and any claims or losses or damage in transit shall be filed by Buyer directly with the carrier. Buyer shall inspect all goods immediately upon delivery for concealed damage. Buyer must notate any damage/shortage on carrier’s delivery receipt. Buyer must report all damage to goods to the carrier within 10 days of delivery of the goods. UPS and FedEx damaged shipments must be reported to Seller within 10 days and must be in the original cartons at the original delivery point for inspection.
CANCELLATION OR SUSPENSION OF ORDERS - Cancellation or suspension of orders will be accepted by Seller only upon terms that will indemnify the Seller for liabilities and expenses incurred and for commitments made by Seller and which will provide for profit on work in process and for the contract value of goods completed and ready for shipment. Postponement of deliveries at Buyer’s request, if for a period of more than thirty (30) days, will not be made without Seller’s approval first being obtained. All postponements are subject to storage and handling charges.
RETURNS - No returns will be accepted without prior approval. All requests must be made within 30 days of the invoice date.
POLES- Poles will not be accepted unless the return is due to warranty or Seller’s error.
ELIGIBILITY- Requests to return custom built products or modified standard products with options will not be accepted. Requests to return products that are unique to a customer or program will not be accepted. All returns must arrive back to the Seller in good working and resalable condition. Items must be returned in the original packaging. Any damage to returned goods will be the responsibility of the buyer. Products not manufactured by the Seller may be subject to the original supplier’s return or cancellation policy.
FEES – Authorized returns will be charged for both inbound and outbound freight and a minimum service charge of thirty-five percent (35%) of the product value.
REPLACEMENTS- Seller has the option of either replacing defective goods or crediting Buyer for the purchase price of such goods. A new Purchase Order is required for replacement orders.
TAXES - All prices, quotations, orders, and agreements are subject to all Federal, State, and Local taxes. These taxes will be added to the invoice unless legal proof of exemption is provided. LSI reserves the right to invoice separately for the taxes should it be necessary to make payment where they were not included at the time of invoicing.
WARRANTY – All requests for warranty assistance must be submitted to LSI and direction must be given from LSI prior to any action being taken. No claims for cost of material or repair will be accepted without prior written approval. For product warranty see LSI’s published Limited Warranty.
CHANGES - LSI reserves the right to make modifications or changes to any of its products, pricing, Limited Warranty and Terms and Conditions without prior notice.
1/22/2013
TERMS AND CONDITIONS - ALL ORDERS MUST INCLUDE A WRITTEN PURCHASE ORDERTERMS & CONDITIONS - ALL ORDERS MUST INCLUDE A WRITTEN PURCHASE ORDER
171
LIMITED WARRANTY LSI Industries Inc. warrants any product or component manufactured by LSI against defects in materials and workmanship for a period of 2 years from date of shipment, provided the conditions of installation and operation have been proper. At LSI’s option, any product proven to be defective within the warranty period will either be repaired or replaced. With prior written approval, LSI will pay reasonable labor costs involved with replacing defective components that are manufactured by LSI and that fail within warranty period. LSI reserves the right to get competitive quotes and to select the appropriate contractor for repairs in the field. LSI WILL NOT HONOR ANY CLAIMS FOR THE COST OF REPAIR WITHOUT PRIOR WRITTEN APPROVAL.
This warranty only covers items manufactured by LSI. It does not cover product purchased where LSI’s warranty is specifically excluded from the purchase price. The above warranty also does not include equipment and components not manufactured by LSI. These items carry the warranty of their respective manufacturers.
ELIGIBILITY- Warranty extends to the original buyer only. Proof of purchase is required.
MAINTENANCE – Poles, Fixtures and LED modules must be inspected and maintained at least annually. Repair of the finish along with structural and electrical components must be conducted on a regular basis to ensure a safe and attractive product.
BALLASTS - Ballasts, capacitors, and ignitors are warranted by the ballast manufacturers. Please check the manufacturer’s published warranty for the ballast in question. Ballasts that fail within the manufacturer’s warranty period will be exchanged by the local ballast manufacturers’ authorized distributor or by LSI, acting as their agent. Either the ballast manufacturer, its agents, or LSI will honor a cash reimbursement claim to cover material charges for replacement ballasts, capacitors, or ignitors. No charges for rental of equipment, travel time or labor will be accepted.
LED POWER SUPPLIES AND DRIVERS –Power Supplies and Drivers not manufactured by LSI are warranted by their manufacturers. Please check the manufacturer’s published warranty for the component in question. Components that fail within the manufacturer’s warranty period will be addressed by the component manufacturer. Power supplies and Drivers manufactured by LSI are warranted for a period of 5 years. Neither the component manufacturer and its agents, nor LSI will honor a cash reimbursement claim to cover Power Supplies or Driver. No charges for rental of equipment, travel time or labor will be accepted.
LAMPS - Lamps are not manufactured by LSI and are specifically excluded from this warranty. No claims for replacement of defective lamps or labor associated with such replacement will be accepted. Contact the lamp manufacturer for warranty assistance.
LED MODULES – Failure is defined as having 7% or more LEDs not illuminated in a light fixture. LEDs that fail within the manufacturer’s warranty period will be exchanged. LSI will not honor a cash reimbursement claim to cover material charges for replacement material. No charges for rental of equipment, travel time or labor will be accepted. LED modules are warranted for a period of 5 years, however the Warranty does not cover failures due to abnormal conditions. These abnormal conditions include, but are not limited to, under/over voltage, under/over current, excessive switching and excessive ambient temperatures.
POLES - All LSI poles are guaranteed to meet the EPA requirements listed. LSI is not responsible if a pole order has a lower EPA rating than the indicated wind-loading zone where the poles will be located. EPA’s are for locations 100 miles away from hurricane ocean lines. Note: Hurricane ocean lines are the Atlantic and Gulf of Mexico coastal areas. For locations within the Hurricane zone, or areas outside the United States contact LSI for the pole EPA for your location.
BANNERS, FLAGS, STREAMERS, SIGNS AND OTHER EXTRANEOUS ITEMS ATTACHED TO POLES VOIDS ALL POLE WARRANTIES AND MAY CREATE SEVERELY HAZARDOUS CONDITIONS. LSI cannot accept responsibility for harm or damage caused in these situations.
This warranty does not apply to fatigue damage or failure resulting from induced vibration and/or harmonic vibration caused by the movement of air currents around the product or by any other local condition.
POLE FINISHES - LSI poles feature the DuraGrip® baked-on polyester-powder finishing process. The Pole finish is warranted for 5 years from date of shipment against cracking, peeling, chalking or fading. DuraGrip® Plus coated poles are warranted for a period of 7 years from the date of shipment.
OUTDOOR FIXTURE FINISHES - LSI fixtures feature the DuraGrip baked-on polyester-powder finishing process. The fixture finish is warranted for a period of 5 years from date of shipment against cracking, peeling, chalking or fading.
INDOOR FIXTURE FINISH – The indoor fixture finish is warranted for normal indoor use for a period of 2 years from date of shipment.
COMPOSITE FIXTURES – Composite fixtures are warranted for a period of 5 year from date of shipment against corrosion.
PROPER HANDLING AND STORAGE- LSI shall claim the warranty to be null and void if the coating fails due to circumstances beyond its control including damage during shipping, handling, unpacking, or installation; damage caused by moisture or other contaminants entrapped between protective packaging materials and coated surface, thus constituting improper storage, prior to placement in service; damage or failure caused by acts of God, falling objects, external forces, explosion, fire, misuse or abuse in application, or any other such occurrences beyond LSI's control.
CAUSTIC OR CORROSIVE ENVIRONMENTS - Fixtures and Poles manufactured and painted by LSI may be damaged by highly caustic or corrosive environments. Such environments may include, but are not limited to, seashore and marine applications, chemical processing facilities, highly watered or fertilized environments and car washes. While many of LSI’s products can be safely applied in these locations, their useful life, including the painted surfaces, may be reduced due to the conditions found in these harsh environments. LSI cannot warrant its products against these severe conditions.
FINISH WARRANTY CLAIM- If during the warranty period the exterior coating shows signs of failure, the Buyer must notify LSI in writing and furnish proof of purchase within 60 days of such failure or deterioration becoming evident. Components will be repaired or replaced at the discretion of LSI. LSI will, at its option, reimburse the customer for the cost to repair the components or will make replacement components available from LSI's factory. Transportation, removal, and installation costs are not included in the replacement.
WARRANTY APPLIES – This warranty only applies to products that are properly installed following the directions in the product’s installation instructions, in their intended application and used in compliance with all applicable local, state and national safety regulations and codes. LSI will not warrant products damaged due to installer connections and/or assembly errors. Damage or failure caused by acts of God, falling objects, explosion, fire, misuse or abuse in application (see product spec sheets for application guidelines), or any other such occurrences beyond LSI’s control are also not warranted.
RIGHT TO EXAMINE- LSI Industries reserves the right to examine all products and/or any associated component to determine the cause of failure and pattern of usage. LSI Industries reserves the right to be the sole judge as to whether any items and components are defective and or covered under this warranty.
CHANGES - LSI reserves the right to make modifications or changes to any of its products, pricing, Limited Warranty and Terms and Conditions without prior notice.
This warranty is exclusive in lieu of all other warranties whether written, oral, expressed or implied and shall constitute the sole and exclusive remedy of Buyer and liability of LSI. LSI is not liable nor warrants the installers and their installation LSI's products are not sold as a "consumer product" under 15U.S.C. 2301.
1-22-13