Post on 28-Apr-2015
Introduction ROI-S05752
-2-
1.1 Accessing the PASOLINK NEO
1 Connect the Computer (PC) with a USB cable between the LCTport and the USB port,
Note: 1. Before connecting the LCT, you need to start to installthe USB Driver, Java 2 Runtime and the Dial-up. Forthe details, refer to Chapter 10 to Chapter 12.
2. Do not perform the dial-up setup before USB driverinstallation has not been completed.
2 Click on “START” menu button, select “Connect to”, “LCT”,then, “Connect LCT” dial-up dialog is appeared,
SELV
!
AUX/ALM SC IN/OUT EOW
PROTECT
CALL MMC
MAINTMEMORY
IDU
XIF IN XIF OUT
IF IN/OUTTXRX
RESETXPIC CTRLXPIC
PWRODUMD/CBL PWR
PASOLINK NEO
ALM2M IN/OUT-A 2M IN/OUT-B
PULL
GG
G
USB Cable
PC for LCT
USB port
PASOLINK NEO IDU
LCT NMS NE
LCT NMS NE
PASOLINK NEO ODU
LCT port
100M PORT 1 PORT 2 100M
LCT SETUP
ROI-S05752 Introduction
-3-
3 The dialog box “Connect LCT” appears,
4 Click on “Dial” button, then the PC is accessed to the IDU,
5 Open the Internet Explorer,
6 Enter URL address: Http//172.17.254.253 of the InternetExplorer and press the “Enter” key,
Introduction ROI-S05752
-4-
7 Enter User ID and password in User/Password entry fields andpress the “Login” button,
Default password of Admin is defined as “12345678”
The password can be changed by Administrator privilege. The LCToperator must have the security system privilege to control of PASOLINKNEO systems. (The password change is described in Chapter 6.3Maintenance 2)
8 Following LCT Open View is displayed, (Cascaded Alarm/Status items are displayed in Main area bydefault.)
User ID Pass Word PrivilegeAdmin ******** Access to the LCT and controlUser (non password) Access to the LCT (monitor only)
PASOLINK NEO LCT Open View (Example)
Installation of USB ROI-S05752
-84-
10. Installation of USB
Following procedure explains when the USB Driver is installed to the PCon Windows Xp.
1. Connect the PC with a USB cable between the LCT port and theUSB port,
2. Select “Install from a list or specific location [Advanced]” andclick on “Next” button,
ROI-S05752 Installation of USB
-85-
3. Insert the CD-ROM of the USB driver to the PC and select“Search for the best driver in these locations” and check “Searchremoval media [floppy, CD-ROM...],” then, click on “Next”button,
4. Click “Continue Anyway” button in the Hardware Installationalert pop-up,
5. USB driver installation will be started,
Installation of USB ROI-S05752
-86-
6. Click “Finish” button in the “Found New Hardware Wizard” afterinstallation has been completed.
ROI-S05752 Dial-up Setting
-87-
11. Dial-up Setting
Following procedure explains when the Dial-up is set to the PC onWindows Xp.
1. Click on “Start”→“Setting”→“Control Panel” and on “NetworkConnections” icon to start the Dialup setting.
2. The “Network Connections” window appears. Click on “Createa new connection” in the Network Tasks category.
Dial-up Setting ROI-S05752
-88-
3. The “Welcome to the New Connection Wizard” windowappears. Click on “Next” button to continue.
4. Select “Connect to the network at my workplace” and click on“Next” button to continue.
ROI-S05752 Dial-up Setting
-89-
5. Select option “Dial-up connection” and click on “Next” button tocontinue.
6. On the “New Connection Wizard” window, enter “LCT” in the“Company Name” entry field and click on “Next” button tocontinue.
Dial-up Setting ROI-S05752
-90-
7. Enter phone number in the “Phone number” entry field and clickon “Next” button to continue.
8. Verify that the connection “LCT” has displayed as the connectionregistered. You can also create a shortcut on your desktop if youneed. Click on “Finish” button.
ROI-S05752 Dial-up Setting
-91-
9. On “Connect LCT” dia-log, click “Properties”,
10. Verify that “Modem-USB Modem Driver [COM(#)]” isdisplayed on the General tab connect using check box, and select“Show icon in notification area when connected” in the LCTProperties dia-log. Then, click on “Configure” button.
Dial-up Setting ROI-S05752
-92-
11. On “Modem Configuration” dia-log, check that unchecked allfive boxes, then click on “OK” button,
12. Retain the default setting on the “Options” tab, click the“Security” tab.
ROI-S05752 Dial-up Setting
-93-
13. Retain the default setting on the “Security” tab, click the“Networking” tab.
14. On the Networking tab, verify that PPP... is displayed in the “Typeof dial-up server I am calling” setting field, unchecked “File andPrinter... and Client for Microsoft....”, “Client for MicrosoftNetworks”.
Dial-up Setting ROI-S05752
-94-
15. Click “Settings” button, unchecked all the boxes in the “PPPSettings” dialog as shown below. Click “OK” to go back to theprevious window. Point “Internet Protocol (TCP/IP)” and thenclick “Properties”.
16. Verify that both “Obtain an IP address automatically” and“Obtain DNS server address automatically” are selected.
17. Click on “Advanced” button,
ROI-S05752 Dial-up Setting
-95-
18. In the “Advanced TCP/IP Settings” dialog, mark check box of“Use default gateway on remote network” and for the PPP linkis unchecked, then Click “OK”.
19. Retain the default setting on the “Advanced” tab and click “OK”.
Java Runtime Install ROI-S05752
-96-96 pages
12. Java Runtime Install
1. Install Java Runtime by double-click on the file name (highlightedbelow).