Post on 29-Jul-2020
1
JEEPERS CREEPERS WORKSHOP
Workshop-in-a-Bag
(with practical implementation for various types of events)
*THIS PAGE IS FOR CONSULTANT USE ONLY*
This workshop was designed to:
Show use of this kit beyond Halloween, making it last all Holiday Expressions long.
Create a display board for a Gathering or other event, showing the versatility of our products while
attracting different interests (scrapbookers, cardmakers, party hostesses, etc.). It only requires ½ a
paper pack, plus additional items (cardstock, embellishments, etc.) to make all the projects.
Highlight a variety of products and techniques.
Reproduce Layout #1 and/or Card #1 as make ‘n take projects at a Gathering or other event. They
were designed using bulk paper.
o Layout #1:
Consider using Sequins or Star Enamel Gems for embellishments – items that can be
easily separated for customer use – rather than the Assortment.
You can also add in a stamped party hat or cake as an accent.
Use a piece of Lagoon cardstock, in place of the striped Zip Strip included on the right
page.
o Card #1
Use Sequins or Star Enamel Gems – can color them with ShinHan markers – instead of
the Assortment.
Teach a layout class, creating both layouts.
Teach a card class, making two each of the four cards.
Mass produce the sour cream party favors.
Make handmade party invitations.
The Celebrate mini album can be altered, not using the PML cards, for a mini album workshop.
o Decorate the inside pages for customer appeal.
Be flexible in serving your customers.
2
JEEPERS CREEPERS WORKSHOP
Workshop-in-a-Bag
12” x 12” Scrapbook Layouts
Party Favors
Party Invitation
Birthday Cards
Mini Album
Gift bag & coordinating
tissue
3
Supplies used:
X7211B Jeepers Creepers Paper Packet
Cardstock
o 1386 Black (1)
o X5783 Emerald (1)
o X5762 Lagoon (2)
o X5782 Pansy (2)
o X5786 Tangerine (1)
o X5929 Whisper (2)
o 1385 White (7)
o X5784 Willow (1)
X7211C Jeepers Creepers Complement
Z4009 Jeepers Creepers Assortment
Z3286 Adventure Ribbon Pack (“Love life” saying and Emerald)
C1662 Wise Guy Birthday
B1484 Jennifer’s Hand
E1034 Marker Alphabet
B1537 Birthday Sparkles
Z3231 4” x 6” Flip Flaps (3 - horizontal)
White Daisy Cards & Envelopes (4)
Z2804 Pansy ink*
Z2812 Raspberry ink*
Z2895 Lagoon ink*
Z2807 Willow ink*
Z2872 Whisper ink
Z2805 Black ink
Z2506 Adventure Mini Pigment Pads Set* (can use the pigment inks instead of the pads)
Z3261 Stars Thin Cut
Z3256 Celebrate Thin Cut
Z3167 Cricut Artistry Collection
ShinHan Markers: Carmine, Cherry Pink, Marigold, Golden Yellow, Pastel Green, Colorless Blender
Additional Basic Supplies:
Z1979 Journaling Pen (for doodling)
Z1204 Bone Folder
Z2060 Thin 3-D Foam Tape
Z2045 Piercing & Embossing Tool Kit (for ease of placing embellishments on projects)
Baby Powder (for removing adhesive from stickers to make 3-D)
1/8” whole punch (for gift bag and mini album)
Cuttlebug or other die cutting machine (for use with Thin Cuts)
Cricut Cuts from Artistry:
1 ½” – “eye spy”, lowercase, out of Tangerine cardstock for Page #1.
2 ¼” – party hats (2) out of White Daisy cardstock for Card #1 and the Invitation. (Artistry, page 50 –
Icon-1, New Years Key {key has a star on it}).
1 ½” – cake stand (1) out of White Daisy cardstock for Card #3. (Artistry, page 18 – Icon-2, i key).
1 ½” – layered cake (1) out of White Daisy cardstock for Card #3. (Artistry, page 18, Icon-1, l key).
1 ½” – candles (3) out of White Daisy cardstock for Card #3. (Artistry, page 18, Shift, Icon-2, l key).
4
3” – circle (1) out of White Daisy cardstock for Card #2. (Artistry, page 30, Icon-1, Travel key {this key
has a circle with an arrow in it}).
2 ¼” – party hat (1) out of Pansy cardstock for Gift Bag. (Artistry, page 50 – Icon-1, New Years Key
{key has a star on it}).
2 ¼” – party hat (1) out of Emerald cardstock for Card #2. (Artistry, page 50 – Icon-1, New Years Key
{key has a star on it}).
2 ½” – circle (1) out of Willow cardstock for Card #1. (Artistry, page 30, Icon-1, Travel key {this key has
a circle with an arrow in it}).
NOTE: The White Daisy Cricut Cuts are made from the remaining White Daisy Cardstock #3. The other
colored cardstock Cricut Cuts will be made from the respective cardstock leftovers.
Zip Strip Cuts:
9” stripe on Monster’s paper for Page #2
2 ¼” polka dot on Card #3
3 ¾” polka dot on Card #4
PML Card Details:
Journaling box cut to 2 ¾” x 2 ¾” for placement on Pansy cardstock on Page #1
“Halloween stories” banner cut for Page #3.
“Beware” card used on front of mini album.
Argyle card used on the cover of the mini album.
Caterpillar card can be used in mini album.
To prepare for assembly:
Cut two pieces of the “word” ribbon to measure 11” each for Layout #2.
Cut two, 16” pieces of Emerald Ribbon for gift bag handles.
Cut a 10” piece of Emerald Ribbon for the mini album.
Stamp [3] party hats in Pansy ink on White Daisy die cuts.
Cut [size] piece from Polka Dot Zip Strip for Card #3.
Cut “celebrate” out of Emerald paper, using the Celebrate Thin Cut, for the mini album.
5
Cutting Diagrams:
Monsters B&T Pansy Circles B&T
Tangerine Stripes B&T Whisper Polka Dot B&T
6
Black Cardstock Emerald Cardstock
Lagoon Cardstock #1 Lagoon Cardstock #2
7
Pansy Cardstock #1 Pansy Cardstock #2
Tangerine Cardstock #1 White Daisy Cardstock #1
8
White Daisy Cardstock #2 White Daisy Cardstock #3
Willow Cardstock
9
Layout #1 – “Eye Spy a Party!”
(Pages 1 & 2)
1. Use Whisper cardstock for
bases.
2. Glue Monsters b&t flush to
right side of Page #1.
3. Adhere Pansy cardstock to left
of Monsters b&t 1 ¾” from top
of page.
4. Dovetail 2” x 2” square pieces
of cardstock (Tangerine,
Lagoon, and Pansy) and glue
slightly under the Lagoon cardstock piece, ¼” apart and
1” from both the sides of the b&t.
5. Place Lagoon cardstock flush to right side and 3 ½” from
top of page.
6. “Eye spy a party!” sentiment directions are provided
below. Place White Daisy cardstock piece flush to the
right side of Page #3, ¼” from the top of the Lagoon
cardstock.
7. Continue building the page, from right to left.
8. Glue Monsters b&t flush to left side of Page #2.
9. Add the paper pieces – Pansy cardstock, striped Zip Strip,
Black cardstock and Tangerine cardstock – 1 ¾” from the
top of the page, to align with Page #3.
10. Align Lagoon cardstock on Page #4 to match the piece
on Page #3.
11. Add all White Daisy photo mats as shown.
Embellishments:
12. Doodle around edge of title piece.
13. Add big arrow to top left area of Page #1.
14. Stamp “party!” using alternating colors of inks and “a” in
Black ink.
15. Add “eye spy”, placing eyeball Complements in the
middle of the letters as shown.
16. 2 ¾” inch journal, PML card in center of Pansy cardstock.
17. Adhere “trouble” oval to bottom right square.
18. 3-D “double”, slighting overlapping “trouble”.
19. Add arrow and stars, making the Lemon star 3-D.
20. 3-D the “fun” circle image on top right corner.
21. 3-D the Willow and Tangerine star and place the White Daisy star directly on the cardstock.
10
Layout #2 – “Sweeter Than Candy”
(Pages 3 & 4)
1. Using White Daisy for the
bases, glue the chevron B&T 2
¾” from the top of Page #3
and flush to the right side. Use
it to guide the placement of
other pieces as shown, building
from right to left.
2. Align the Pansy cardstock strip,
on Page #4, to match Page #3.
All white cardstock mats are
centered in their respective areas.
3. Build Page #4, starting with the Emerald piece of
cardstock, from left to right as shown.
4. Glue ribbon on Page #4 as shown.
5. To align the ribbon piece on Page #3, use Page #4 as a
guide for placement.
6. Adhere White Daisy journaling box to Black cardstock.
7. Glue Black mat on Page #4, placing it 1 ¾” from the left of
the page and approximately 1/8” below the ribbon.
Embellishments:
8. Build the word “sweeter from letters in Complements,
placing directly on cardstock.
9. Dovetail Raspberry, square polka dot Complement to
bottom, right-hand area of “Sweeter”. Place directly on
cardstock.
10. Trim off “sweeter” from Complement image so you are
left with “than candy”. Glue onto ¼” x 1 5/8” piece of
Willow cardstock. 3-D to dovetail image.
11. 3-D the Raspberry and top Emerald candies. Glue other
Emerald candy to cardstock.
12. 3-D monster on bottom right-hand corner of journaling
box. Place eyes from Complements on monster’s eyes for
dimension.
13. Add three stars.
14. Glue Pansy, tag Complement to top area of Willow
photo mat.
11
Card #1 - “#bestbirthdayever”
1. Stamp party hat image on Cricut cut using Pansy ink.
2. Color in stripes with Cherry Pink + Carmine Shinhan markers
3. Dovetail Tangerine and Lagoon banners.
4. Doodle around all cardstock pieces as shown.
5. Glue monster B&T flush to left side of card base.
6. Adhere Pansy cardstock flush to it and to right side of card base.
7. Glue Tangerine banner 1” from bottom of card front, flush to right
side.
8. Add Lagoon banner ¼” from top of Tangerine banner.
9. Adhere circle ¼” from bottom of Lagoon banner.
10. Using 3-D Foam Tape, glue sentiment banner ¼” from bottom of
Tangerine banner.
11. 3-D the hat on circle.
12. Add three black Assortment images to card front as shown.
Card #2 – “Hope Your Day is as Awesome as You!”
1. Stamp party hat image, in Black ink, on Emerald cardstock cut from
Cricut.
2. Stamp confetti image in Pansy ink on Pansy cardstock strip to add
texture and dimension.
3. Glue Whisper B&T to card front.
4. Build your card from right to left, gluing chevron b&t ¼” from right
side and ¾” from top of card.
5. Adhere black and white polka dot b&t 1/16” from left size of
chevron b&t.
6. Estimate placement of the other three pieces of cardstock and
stamp sentiment, in Pansy ink, on circle. Add doodling.
7. Glue circle ½” from left side of card and 1/16” from bottom of b&t
pieces as shown.
8. Place Pansy cardstock strip ½” from bottom of b&t.
9. 3-D party hat and add three enamel stars.
12
Card #3 – “Birthday Cake”
1. Doodle around edges of White Daisy cardstock and Pansy Circle
b&t.
2. Stamp birthday cake image in Lagoon and Raspberry, inking up
the appropriate areas to make the two-colored image, on Cricut
cut.
3. Use the Marigold Shinhan marker to color in the “icing”.
4. Stamp cake image in Whisper ink on Cricut cut.
5. Stamp candle images on Cricut cuts.
6. Using Golden Yellow + Colored Blender + Pastel Green Shinhan
markers, make the flames of the candles look “yellow”.
7. Glue Black cardstock to card base.
8. Glue Pansy Circle b&t to card front, ¼” from the top and sides.
9. Using 2 ¼” Polka Dot Zip Strip, glue it 1/16” from bottom of White
Daisy piece.
10. Adhere White Daisy cardstock, ½” from the bottom of the card, centered from left to right.
11. 3-D cake stand.
12. Glue cake and candle images behind the respective images as shown.
Card #4 – “At Your Age…Calories”
1. Ink “happy” in Raspberry ink. Stamp on White Daisy
cardstock.
2. Stamp the rest of the sentiment in Black ink.
3. Use a variety of ShinHan markers to color in “birthday”.
4. Doodle around image. Glue to Pansy cardstock.
5. Dovetail both ends of 3 ¾” Polka Dot Zip Strip and Black
cardstock.
6. Glue Tangerine Striped b&t to left of card.
7. Place Lagoon cardstock flush to right of card.
8. Glue Polka Dot Zip Strip ½” from right side of card and 1”
from bottom of card.
9. Adhere Black cardstock banner 1/16” above Polka Dot banner.
10. Glue Willow cardstock ¼” from bottom of the card and 1/16” from left side of Polka Dot banner.
11. 3-D sentiment piece placing it ½” from bottom of Polka Dot banner and 1/16” from left edge of
[green] strip.
12. 3-D medium size, Tangerine Star Thin Cut by securing it to top right corner of sentiment.
13
Party Invitation
1. Stamp hat image, using Pansy cardstock, onto Cricut cut.
2. Color in stripes with Cherry Pink + Carmine Shinhan markers.
3. Adhere Tangerine-striped B&T to White Daisy base.
4. Center Tangerine cardstock and adhere to B&T.
5. Print out party invitation details, to measure 3 ½” x 4 ¾”. Stamp
Birthday Bash using Pen Pal Alphabet and Lagoon and Pansy
inks. Center on Tangerine cardstock. Doodle around edges.
6. Glue hat to bottom, left-hand corner. Consider leaving flat or
using 3-D Thin Foam Tape, based upon method of delivery
(hand-deliver, mailed through postal service, etc.).
7. Add small enamel star to hat top.
8. Using the “Halloween Stories”, 3 x 4 Picture My Life card, trim
the top area to a strip measuring ½” x 1 ½”. Dovetail one end
and adhere to invitation front as shown.
Party Bag
1. Using two pieces of 12 x 12 White Daisy cardstock, score
three sides of the bag at 3” each.
2. Fold along each score line with Bone Folder.
3. Cut up on two of the score lines so your bag looks as
shown in Image 1.
4. Using an 1/8” hole punch, punch holes on both the front
and back of the gift bag pieces 1 ½” from each side.
5. Using two, 16” pieces of ribbon, insert them into the holes
and tie a knot to secure the bag handles.
6. Using a strong adhesive, glue the bottom flaps inside one
another to create the base of the bag. See images 1 and
2.
7. Glue one of the bag sides inside the other to create a
handmade gift bag.
8. Stamp “Happy Birthday to You” sentiment to White Daisy
cardstock, in Lagoon ink, centering it.
9. Stamp party hat image, using Black ink, in Pansy Cricut
cut.
10. Adhere sentiment piece to Pansy cardstock strip.
11. Glue the Slate Polka Dot b&t to Pansy cardstock.
12. Place sentiment piece 1 ¼” from bottom of bigger Pansy
cardstock.
13. Add three enamel stars.
14. 3-D party hat.
15. Random stamp tissue paper, using coordinating ink colors, to coordinate with gift bag.
14
Image 1 Image 2 Image 3
Party Favors – Sour Cream Containers
1. Using remaining paper, or PML cards, cut to
measure 4” x 4 ¾”.
2. So the container will end up 4” long, roll the paper
on the long edge to form what would resemble an
empty toilet paper roll. Use strong adhesive to form
tube.
3. Place a strong adhesive on both sides of the open
ends of the tube. Pinch one edge closed and pinch
the other side closed in the opposite direction.
4. Add tags and embellishments a party flair.
“Celebrate” Mini Album
15
1. Score both pieces of the Lagoon front and
back covers of the mini album at 15/16” from
the left side. Use bone folder to fold and
make a good crease.
2. Stack three (or more) 4” x 6” Flip Flaps on top
of each other, removing the protective strip
so they adhere to one another.
3. Place the Flip Flaps on top of the bag cover
so that the book will open with ease.
4. Lay the front cover on top and punch holes 1
¼” from the top and bottom of the album
front.
5. Use Emerald ribbon to secure a knot as shown.
6. Center Black cardstock on Lagoon cardstock front.
7. Glue “Beware”, 4” x 6” PML card to center of Black cardstock with the vertical orientation so the
argyle PML card will cover the sentiment.
8. Adhere White Daisy cardstock 1” from left side of Tangerine PML card.
9. Using 4” x 3” Argyle PML card, center on White Daisy piece.
10. Glue “Celebrate” in a diagonal fashion on book front.
11. Add stars on as shown.
12. Decorate the inside of the mini album as desired. This is one of the PML cards.